The decoupled MMIO feature doesn't work as intended by HW team. Enabling
it with forcewake will only make debugging efforts more difficult, so
let's disable it.
Fixes: 85ee17ebeedd ("drm/i915/bxt: Broxton decoupled MMIO") Cc: Zhe Wang <zhe1.wang@intel.com> Cc: Praveen Paneri <praveen.paneri@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Signed-off-by: Kai Chen <kai.chen@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170523215812.18328-2-kai.chen@intel.com
(cherry picked from commit 0051c10acabb631cfd439eae73289e6e4c39b2b7) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some systems there can be a race condition in which no crtc state is
added to the first atomic commit. This results in all crtc's having a
null DDB allocation, causing a FIFO underrun on any update until the
first modeset.
Changes since v1:
- Do not take the connection_mutex, this is already done below.
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Inspired-by: Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 98d39494d375 ("drm/i915/gen9: Compute DDB allocation at atomic
check time (v4)") Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170531154236.27180-1-maarten.lankhorst@linux.intel.com Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 367d73d2806085bb507ab44c1f532640917fd5ca) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Commit 7c3f86b6dc51 ("drm/i915: Invalidate the guc ggtt TLB upon
insertion") added the restoration of the invalidation routine after the
GuC was disabled, but missed that the GuC was unconditionally disabled
when not used. This then overwrites the invalidate routine for the older
chipsets, causing havoc and breaking resume as the most obvious victim.
We place the guard inside i915_ggtt_disable_guc() to be backport
friendly (the bug was introduced into v4.11) but it would be preferred
to be in more control over when this was guard (i.e. do not try and
teardown the data structures before we have enabled them). That should
be true with the reorganisation of the guc loaders.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 7c3f86b6dc51 ("drm/i915: Invalidate the guc ggtt TLB upon insertion") Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170531190514.3691-1-chris@chris-wilson.co.uk Reviewed-by: Michel Thierry <michel.thierry@intel.com>
(cherry picked from commit cb60606d835ca8b2f744835116bcabe64ce88849) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The scanline counter is bonkers on VLV/CHV DSI. The scanline counter
increment is not lined up with the start of vblank like it is on
every other platform and output type. This causes problems for
both the vblank timestamping and atomic update vblank evasion.
On my FFRD8 machine at least, the scanline counter increment
happens about 1/3 of a scanline ahead of the start of vblank (which
is where all register latching happens still). That means we can't
trust the scanline counter to tell us whether we're in vblank or not
while we're on that particular line. In order to keep vblank
timestamping in working condition when called from the vblank irq,
we'll leave scanline_offset at one, which means that the entire
line containing the start of vblank is considered to be inside
the vblank.
For the vblank evasion we'll need to consider that entire line
to be bad, since we can't tell whether the registers already
got latched or not. And we can't actually use the start of vblank
interrupt to get us past that line as the interrupt would fire
too soon, and then we'd up waiting for the next start of vblank
instead. One way around that would using the frame start
interrupt instead since that wouldn't fire until the next
scanline, but that would require some bigger changes in the
interrupt code. So for simplicity we'll just poll until we get
past the bad line.
v2: Adjust the comments a bit
Cc: Jonas Aaberg <cja@gmx.net> Tested-by: Jonas Aaberg <cja@gmx.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99086 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161215174734.28779-1-ville.syrjala@linux.intel.com Tested-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com>
(cherry picked from commit ec1b4ee2834e66884e5b0d3d465f347ff212e372) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The clipped src coordinates have already been rotated by 270 degrees for
when the plane rotation is 90/270 degrees, hence the FBC code should no
longer swap the width and height.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Fixes: b63a16f6cd89 ("drm/i915: Compute display surface offset in the plane check hook for SKL+") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170331180056.14086-4-ville.syrjala@linux.intel.com Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit 73714c05df97d7527e7eaaa771472ef2ede46fa3) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For most cases a protection exception in the host (e.g. copy
on write or dirty tracking) on the sie instruction will indicate
an instruction length of 4. Turns out that there are some corner
cases (e.g. runtime instrumentation) where this is not necessarily
true and the ILC is unpredictable.
Let's replace our 4 byte rewind_pad with 3 byte nops to prepare for
all possible ILCs.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linux IRQ #0 is reserved for error reporting and may not be used.
Increase NR_IRQS for one additional slot and increase
irq_domain_add_legacy parameter first_irq value to 1, so that linux
IRQ #0 is not associated with hardware IRQ #0 in legacy IRQ domains.
Introduce macro XTENSA_PIC_LINUX_IRQ for static translation of xtensa
PIC hardware IRQ # to linux IRQ #. Use this macro in XTFPGA platform
data definitions.
This fixes inability to use hardware IRQ #0 in configurations that don't
use device tree and allows for non-identity mapping between linux IRQ #
and hardware IRQ #.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7b0a911478c7 efi/x86: Move the EFI BGRT init code to early init code
The root cause is the firmware on those machines provides invalid BGRT
image addresses.
In a kernel before above commit BGRT initializes late and uses ioremap()
to map the image address. Ioremap validates the address, if it is not a
valid physical address ioremap() just fails and returns. However in current
kernel EFI BGRT initializes early and uses early_memremap() which does not
validate the image address, and kernel panic happens.
According to ACPI spec the BGRT image address should fall into
EFI_BOOT_SERVICES_DATA, see the section 5.2.22.4 of below document:
Fix this issue by validating the image address in efi_bgrt_init(). If the
image address does not fall into any EFI_BOOT_SERVICES_DATA areas we just
bail out with a warning message.
Reported-by: Maniaxx <tripleshiftone@gmail.com> Signed-off-by: Dave Young <dyoung@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 7b0a911478c7 ("efi/x86: Move the EFI BGRT init code to early init code") Link: http://lkml.kernel.org/r/20170609084558.26766-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code in block/partitions/msdos.c recognizes FreeBSD, OpenBSD
and NetBSD partitions and does a reasonable job picking out OpenBSD
and NetBSD UFS subpartitions.
But for FreeBSD the subpartitions are always "bad".
Kernel: <bsd:bad subpartition - ignored
Though all 3 of these BSD systems use UFS as a file system, only
FreeBSD uses relative start addresses in the subpartition
declarations.
The following patch fixes this for FreeBSD partitions and leaves
the code for OpenBSD and NetBSD intact:
Signed-off-by: Richard Narron <comet.berkeley@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI / PM: Avoid resuming PCI devices during system suspend
PCI devices will default to allowing the system suspend complete
optimization where devices are not woken up during system suspend if
they were already runtime suspended. This however breaks the i915/HDA
drivers for two reasons:
- The i915 driver has system suspend specific steps that it needs to
run, that bring the device to a different state than its runtime
suspended state.
- The HDA driver's suspend handler requires power that it will request
from the i915 driver's power domain handler. This in turn requires the
i915 driver to runtime resume itself, but this won't be possible if the
suspend complete optimization is in effect: in this case the i915
runtime PM is disabled and trying to get an RPM reference returns
-EACCESS.
Solve this by requiring the PCI/PM core to resume the device during
system suspend which in effect disables the suspend complete optimization.
Regardless of the above commit the optimization stayed disabled for DRM
devices until
so this patch is in practice a fix for this commit. Another reason for
the bug staying hidden for so long is that the optimization for a device
is disabled if it's disabled for any of its children devices. i915 may
have a backlight device as its child which doesn't support runtime PM
and so doesn't allow the optimization either. So if this backlight
device got registered the bug stayed hidden.
Credits to Marta, Tomi and David who enabled pstore logging,
that caught one instance of this issue across a suspend/
resume-to-ram and Ville who rememberd that the optimization was enabled
for some devices at one point.
Some drivers - like i915 - may not support the system suspend direct
complete optimization due to differences in their runtime and system
suspend sequence. Add a flag that when set resumes the device before
calling the driver's system suspend handlers which effectively disables
the optimization.
Needed by a future patch fixing suspend/resume on i915.
Suggested by Rafael.
Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: stable@vger.kernel.org
(rebased on v4.8, added kernel version to commit message stable tag) Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Due to a race with the shrinker, when we try to allocate a pagetable, we
may end up shrinking it instead. This comes as a nasty surprise as we
try to dereference it to fill in the pagetable entries for the object.
In linus/master this is fixed by pinning the pagetables prior to
allocation, but that backport is roughly
drivers/gpu/drm/i915/i915_gem_gtt.c | 10 ----------
1 file changed, 10 deletions(-)
i.e. unsuitable for stable. Instead we neuter the code that tried to
free the pagetables.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99295 Fixes: 2ce5179fe826 ("drm/i915/gtt: Free unused lower-level page tables") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.10+ Tested-by: Maël Lavault <mael.lavault@protonmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes a regression in commit 4d6501dce079 where I didn't notice
that MIPS and OpenRISC were reinitialising p->{set,clear}_child_tid to
NULL after our initialisation in copy_process().
We can simply get rid of the arch-specific initialisation here since it
is now always done in copy_process() before hitting copy_thread{,_tls}().
Review notes:
- As far as I can tell, copy_process() is the only user of
copy_thread_tls(), which is the only caller of copy_thread() for
architectures that don't implement copy_thread_tls().
- After this patch, there is no arch-specific code touching
p->set_child_tid or p->clear_child_tid whatsoever.
- It may look like MIPS/OpenRISC wanted to always have these fields be
NULL, but that's not true, as copy_process() would unconditionally
set them again _after_ calling copy_thread_tls() before commit 4d6501dce079.
The existing code selects no next branch to be inspected when
re-inserting an inactive element into the rb-tree, looping endlessly.
This patch restricts the check for active elements to the EEXIST case
only.
Fixes: e701001e7cbe ("netfilter: nft_rbtree: allow adjacent intervals with dynamic updates") Reported-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Tested-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The main thing are the DDI ports. If there's a VBT that says there are
no outputs, we should trust that, and not have semi-random
defaults. Unfortunately, the defaults have resulted in some Chromebooks
without VBT to rely on this behaviour, so we split out the defaults for
the missing VBT case.
We don't use the error return for anything other than reporting and
logging that there is no VBT. We can pull the logging in the function,
and remove the error status return. Moreover, if we needed the
information for something later on, we'd probably be better off storing
the bit in dev_priv, and using it where it's needed, instead of using
the error return.
Cong Wang correctly pointed out that the RCU read locking of the
auditd_connection struct was wrong, this patch correct this by
adopting a more traditional, and correct RCU locking model.
This patch is heavily based on an earlier prototype by Cong Wang.
Reported-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The recent conversion to the hotplug state machine missed that the original
hotplug notifiers did not execute in the frozen state, which is used on
suspend on resume.
This does not matter on single socket machines, but on multi socket systems
this breaks when the device for a non-boot socket is removed when the last
CPU of that socket is brought offline. The device removal locks up the
machine hard w/o any debug output.
Prevent executing the hotplug callbacks when cpuhp_tasks_frozen is true.
Thanks to Tommi for providing debug information patiently while I failed to
spot the obvious.
Fixes: e00ca5df37ad ("hwmon: (coretemp) Convert to hotplug state machine") Reported-by: Tommi Rantala <tt.rantala@gmail.com> Tested-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: "Chen, Yu C" <yu.c.chen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The above problem can also be recreated on a regular xfs filesystem
using the command,
$ fsstress -d /mnt -l 1000 -n 1000 -p 1000
The reason for the call trace is,
1. When 'reserving' blocks for delayed allocation , XFS reserves more
blocks (i.e. past file's current EOF) than required. This is done
because XFS assumes that userspace might write more data and hence
'reserving' more blocks might lead to the file's new data being
stored contiguously on disk.
2. The in-memory 'struct xfs_bmbt_irec' mapping the file's last extent would
then cover the prealloc-ed EOF blocks in addition to the regular blocks.
3. When flushing the dirty blocks to disk, we only flush data till the
file's EOF. But before writing out the dirty data, we allocate blocks
on the disk for holding the file's new data. This allocation includes
the blocks that are part of the 'prealloc EOF blocks'.
4. Later, when the last reference to the inode is being closed, XFS frees the
unused 'prealloc EOF blocks' in xfs_inactive().
In step 3 above, When allocating space on disk for the delayed allocation
range, the space allocator might sometimes allocate less blocks than
required. If such an allocation ends right at the current EOF of the
file, We will not be able to clear the "delayed allocation" flag for the
'prealloc EOF blocks', since we won't have dirty buffer heads associated
with that range of the file.
In such a situation if a Direct I/O read operation is performed on file
range [X, Y] (where X < EOF and Y > EOF), we flush dirty data in the
range [X, Y] and invalidate page cache for that range (Refer to
iomap_dio_rw()). Later for performing the Direct I/O read, XFS obtains
the extent items (which are still cached in memory) for the file
range. When doing so we are not supposed to get an extent item with
IOMAP_DELALLOC flag set, since the previous "flush" operation should
have converted any delayed allocation data in the range [X, Y]. Hence we
end up hitting a WARN_ON_ONCE(1) statement in iomap_dio_actor().
This commit fixes the bug by preventing the read operation from going
beyond iomap_dio->i_size.
Reported-by: Santhosh G <santhog4@linux.vnet.ibm.com> Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
a590b90d472f ("cgroup: fix spurious warnings on cgroup_is_dead() from
cgroup_sk_alloc()") converted most cgroup_get() usages to
cgroup_get_live() leaving cgroup_sk_alloc() the sole user of
cgroup_get(). When !CONFIG_SOCK_CGROUP_DATA, this ends up triggering
unused warning for cgroup_get().
Silence the warning by adding __maybe_unused to cgroup_get().
This patch fixes an issue that kernel panic happens when DMA is enabled
and we press enter key while the kernel booting on the serial console.
* An interrupt may occur after sci_request_irq().
* DMA transfer area is initialized by setup_timer() in sci_request_dma()
and used in interrupt.
If an interrupt occurred between sci_request_irq() and setup_timer() in
sci_request_dma(), DMA transfer area has not been initialized yet.
So, this patch changes the order of sci_request_irq() and
sci_request_dma().
Not calling pm_runtime_enable() means that runtime PM can't be
enabled at all via sysfs. So we definitely need to call it
from somewhere.
Calling it from the driver seems like a bad idea because it
would have to be paired with a pm_runtime_disable() at driver
unload time, otherwise the core gets upset. Also if there's
no LPE audio driver loaded then we couldn't runtime suspend
i915 either.
So it looks like a better plan is to call it from i915 when
we register the platform device. That seems to match how
pci generally does things. I cargo culted the
pm_runtime_forbid() and pm_runtime_set_active() calls from
pci as well.
The exposed runtime PM API is massive an thorougly misleading, so
I don't actually know if this is how you're supposed to use the API
or not. But it seems to work. I can now runtime suspend i915 again
with or without the LPE audio driver loaded, and reloading the
LPE audio driver also seems to work.
Note that powertop won't auto-tune runtime PM for platform devices,
which is a little annoying. So I'm not sure that leaving runtime
PM in "on" mode by default is the best choice here. But I've left
it like that for now at least.
Also remove the comment about there not being much benefit from
LPE audio runtime PM. Not allowing runtime PM blocks i915 runtime
PM, which will also block s0ix, and that could have a measurable
impact on power consumption.
A recent fix to /dev/mem prevents mappings from wrapping around the end
of physical address space. However, the check was written in a way that
also prevents a mapping reaching just up to the end of physical address
space, which may be a valid use case (especially on 32-bit systems).
This patch fixes it by checking the last mapped address (instead of the
first address behind that) for overflow.
Fixes: b299cde245 ("drivers: char: mem: Check for address space wraparound with mmap()") Reported-by: Nico Huber <nico.h@gmx.de> Signed-off-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a custom CPU target is specified and that one is not available _or_
can't be interrupted then the code returns to userland without dropping a
lock as notices by lockdep:
|echo 133 > /sys/devices/system/cpu/cpu7/hotplug/target
| ================================================
| [ BUG: lock held when returning to user space! ]
| ------------------------------------------------
| bash/503 is leaving the kernel with locks still held!
| 1 lock held by bash/503:
| #0: (device_hotplug_lock){+.+...}, at: [<ffffffff815b5650>] lock_device_hotplug_sysfs+0x10/0x40
So release the lock then.
Fixes: 757c989b9994 ("cpu/hotplug: Make target state writeable") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170602142714.3ogo25f2wbq6fjpj@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
soc_cleanup_card_resources() call snd_card_free() at the last of its
procedure. This turned out to lead to a use-after-free.
PCM runtimes have been already removed via soc_remove_pcm_runtimes(),
while it's dereferenced later in soc_pcm_free() called via
snd_card_free().
The fix is simple: just move the snd_card_free() call to the beginning
of the whole procedure. This also gives another benefit: it
guarantees that all operations have been shut down before actually
releasing the resources, which was racy until now.
Reported-and-tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
snd_timer_user_tselect() reallocates the queue buffer dynamically, but
it forgot to reset its indices. Since the read may happen
concurrently with ioctl and snd_timer_user_tselect() allocates the
buffer via kmalloc(), this may lead to the leak of uninitialized
kernel-space data, as spotted via KMSAN:
BUG: KMSAN: use of unitialized memory in snd_timer_user_read+0x6c4/0xa10
CPU: 0 PID: 1037 Comm: probe Not tainted 4.11.0-rc5+ #2739
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16
dump_stack+0x143/0x1b0 lib/dump_stack.c:52
kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:1007
kmsan_check_memory+0xc2/0x140 mm/kmsan/kmsan.c:1086
copy_to_user ./arch/x86/include/asm/uaccess.h:725
snd_timer_user_read+0x6c4/0xa10 sound/core/timer.c:2004
do_loop_readv_writev fs/read_write.c:716
__do_readv_writev+0x94c/0x1380 fs/read_write.c:864
do_readv_writev fs/read_write.c:894
vfs_readv fs/read_write.c:908
do_readv+0x52a/0x5d0 fs/read_write.c:934
SYSC_readv+0xb6/0xd0 fs/read_write.c:1021
SyS_readv+0x87/0xb0 fs/read_write.c:1018
This patch adds the missing reset of queue indices. Together with the
previous fix for the ioctl/read race, we cover the whole problem.
Reported-by: Alexander Potapenko <glider@google.com> Tested-by: Alexander Potapenko <glider@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The read from ALSA timer device, the function snd_timer_user_tread(),
may access to an uninitialized struct snd_timer_user fields when the
read is concurrently performed while the ioctl like
snd_timer_user_tselect() is invoked. We have already fixed the races
among ioctls via a mutex, but we seem to have forgotten the race
between read vs ioctl.
This patch simply applies (more exactly extends the already applied
range of) tu->ioctl_lock in snd_timer_user_tread() for closing the
race window.
Reported-by: Alexander Potapenko <glider@google.com> Tested-by: Alexander Potapenko <glider@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reusing the list_head for both is a bad idea. Callback execution is done
with the lock dropped so that alarms can be rescheduled from the callback,
which means that with some unfortunate timing, lists can get corrupted.
The execution list should not require its own locking, the single function
that uses it can only be called from a single context.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During early boot, load_ucode_intel_ap() uses __load_ucode_intel()
to obtain a pointer to the relevant microcode patch (embedded in the
initrd), and stores this value in 'intel_ucode_patch' to speed up the
microcode patch application for subsequent CPUs.
On resuming from suspend-to-RAM, however, load_ucode_ap() calls
load_ucode_intel_ap() for each non-boot-CPU. By then the initramfs is
long gone so the pointer stored in 'intel_ucode_patch' no longer points to
a valid microcode patch.
Clear that pointer so that we effectively fall back to the CPU hotplug
notifier callbacks to update the microcode.
When vmw_gb_surface_define_ioctl() is called with an existing buffer,
we end up returning an uninitialized variable in the backup_handle.
The fix is to first initialize backup_handle to 0 just to be sure, and
second, when a user-provided buffer is found, we will use the
req->buffer_handle as the backup_handle.
The 'req->mip_levels' parameter in vmw_gb_surface_define_ioctl() is
a user-controlled 'uint32_t' value which is used as a loop count limit.
This can lead to a kernel lockup and DoS. Add check for 'req->mip_levels'.
Use software polling (PHY_POLL) to check for link state changes instead
of relying on the EMAC's hardware polling feature. Some PHY drivers
are unable to get a functioning link because the HW polling is not
robust enough.
The EMAC is able to poll the PHY on the MDIO bus looking for link state
changes (via the Link Status bit in the Status Register at address 0x1).
When the link state changes, the EMAC triggers an interrupt and tells the
driver what the new state is. The feature eliminates the need for
software to poll the MDIO bus.
Unfortunately, this feature is incompatible with phylib, because it
ignores everything that the PHY core and PHY drivers are trying to do.
In particular:
1. It assumes a compatible register set, so PHYs with different registers
may not work.
2. It doesn't allow for hardware errata that have work-arounds implemented
in the PHY driver.
3. It doesn't support multiple register pages. If the PHY core switches
the register set to another page, the EMAC won't know the page has
changed and will still attempt to read the same PHY register.
4. It only checks the copper side of the link, not the SGMII side. Some
PHY drivers (e.g. at803x) may also check the SGMII side, and
report the link as not ready during autonegotiation if the SGMII link
is still down. Phylib then waits for another interrupt to query
the PHY again, but the EMAC won't send another interrupt because it
thinks the link is up.
Tested-by: Manoj Iyer <manoj.iyer@canonical.com> Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linu Cherian reported a WARN in cleanup_srcu_struct() when shutting
down a guest running iperf on a VFIO assigned device. This happens
because irqfd_wakeup() calls srcu_read_lock(&kvm->irq_srcu) in interrupt
context, while a worker thread does the same inside kvm_set_irq(). If the
interrupt happens while the worker thread is executing __srcu_read_lock(),
updates to the Classic SRCU ->lock_count[] field or the Tree SRCU
->srcu_lock_count[] field can be lost.
The docs say you are not supposed to call srcu_read_lock() and
srcu_read_unlock() from irq context, but KVM interrupt injection happens
from (host) interrupt context and it would be nice if SRCU supported the
use case. KVM is using SRCU here not really for the "sleepable" part,
but rather due to its IPI-free fast detection of grace periods. It is
therefore not desirable to switch back to RCU, which would effectively
revert commit 719d93cd5f5c ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING",
2014-01-16).
However, the docs are overly conservative. You can have an SRCU instance
only has users in irq context, and you can mix process and irq context
as long as process context users disable interrupts. In addition,
__srcu_read_unlock() actually uses this_cpu_dec() on both Tree SRCU and
Classic SRCU. For those two implementations, only srcu_read_lock()
is unsafe.
When Classic SRCU's __srcu_read_unlock() was changed to use this_cpu_dec(),
in commit 5a41344a3d83 ("srcu: Simplify __srcu_read_unlock() via
this_cpu_dec()", 2012-11-29), __srcu_read_lock() did two increments.
Therefore it kept __this_cpu_inc(), with preempt_disable/enable in
the caller. Tree SRCU however only does one increment, so on most
architectures it is more efficient for __srcu_read_lock() to use
this_cpu_inc(), and any performance differences appear to be down in
the noise.
Fixes: 719d93cd5f5c ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING") Reported-by: Linu Cherian <linuc.decode@gmail.com> Suggested-by: Linu Cherian <linuc.decode@gmail.com> Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
devm_ioremap_resource() enforces that there are no overlapping
resources, where as devm_ioremap() does not. The sata phy driver needs
a subset of the sata IO address space, so maps some of the sata
address space. As a result, sata_mv now fails to probe, reporting it
cannot get its resources, and so we don't have any SATA disks.
Currently tsk->thread.load_tm is not initialized in the task creation
and can contain garbage on a new task.
This is an undesired behaviour, since it affects the timing to enable
and disable the transactional memory laziness (disabling and enabling
the MSR TM bit, which affects TM reclaim and recheckpoint in the
scheduling process).
Currently tsk->thread->load_vec and load_fp are not initialized during
task creation, which can lead to garbage values in these variables (non-zero
values).
These variables will be checked later in restore_math() to validate if the
FP and vector registers are being utilized. Since these values might be
non-zero, the restore_math() will continue to save the FP and vectors even if
they were never utilized by the userspace application. load_fp and load_vec
counters will then overflow (they wrap at 255) and the FP and Altivec will be
finally disabled, but before that condition is reached (counter overflow)
several context switches will have restored FP and vector registers without
need, causing a performance degradation.
Fixes: 70fe3d980f5f ("powerpc: Restore FPU/VEC/VSX if previously used") Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Gustavo Romero <gusbromero@gmail.com> Acked-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When adding or removing memory, the aa_index (affinity value) for the
memblock must also be converted to match the endianness of the rest
of the 'ibm,dynamic-memory' property. Otherwise, subsequent retrieval
of the attribute will likely lead to non-existent nodes, followed by
using the default node in the code inappropriately.
Fixes: 5f97b2a0d176 ("powerpc/pseries: Implement memory hotplug add in the kernel") Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 8c272261194d ("powerpc/numa: Enable USE_PERCPU_NUMA_NODE_ID"), we
switched to the generic implementation of cpu_to_node(), which uses a percpu
variable to hold the NUMA node for each CPU.
Unfortunately we neglected to notice that we use cpu_to_node() in the allocation
of our percpu areas, leading to a chicken and egg problem. In practice what
happens is when we are setting up the percpu areas, cpu_to_node() reports that
all CPUs are on node 0, so we allocate all percpu areas on node 0.
This is visible in the dmesg output, as all pcpu allocs being in group 0:
To fix it we need an early_cpu_to_node() which can run prior to percpu being
setup. We already have the numa_cpu_lookup_table we can use, so just plumb it
in. With the patch dmesg output shows two groups, 0 and 1:
when driver is loaded with Multi Queue enabled, it was noticed that
there was one less queue pair created.
Following message would indicate this:
"No resources to create additional q pair."
The result of one less queue pair means that system can crash, if the
block mq layer thinks there is an extra hardware queue available, and
the driver will use a NULL ptr qpair in that instance.
Following stack trace is seen in one of the crash:
When pci_enable_device() or pci_enable_device_mem() fail in
qla2x00_probe_one() we bail out but do a call to
pci_disable_device(). This causes the dev_WARN_ON() in
pci_disable_device() to trigger, as the device wasn't enabled
previously.
So instead of taking the 'probe_out' error path we can directly return
*iff* one of the pci_enable_device() calls fails.
Additionally rename the 'probe_out' goto label's name to the more
descriptive 'disable_device'.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Fixes: e315cd28b9ef ("[SCSI] qla2xxx: Code changes for qla data structure refactoring") Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Under memory pressure, we start ageing pages, which amounts to parsing
the page tables. Since we don't want to allocate any extra level,
we pass NULL for our private allocation cache. Which means that
stage2_get_pud() is allowed to fail. This results in the following
splat:
btrfs_calc_trans_metadata_size() does an unsigned 32-bit multiplication,
which can overflow if num_items >= 4 GB / (nodesize * BTRFS_MAX_LEVEL * 2).
For a nodesize of 16kB, this overflow happens at 16k items. Usually,
num_items is a small constant passed to btrfs_start_transaction(), but
we also use btrfs_calc_trans_metadata_size() for metadata reservations
for extent items in btrfs_delalloc_{reserve,release}_metadata().
In drop_outstanding_extents(), num_items is calculated as
inode->reserved_extents - inode->outstanding_extents. The difference
between these two counters is usually small, but if many delalloc
extents are reserved and then the outstanding extents are merged in
btrfs_merge_extent_hook(), the difference can become large enough to
overflow in btrfs_calc_trans_metadata_size().
The overflow manifests itself as a leak of a multiple of 4 GB in
delalloc_block_rsv and the metadata bytes_may_use counter. This in turn
can cause early ENOSPC errors. Additionally, these WARN_ONs in
extent-tree.c will be hit when unmounting:
Fix it by casting nodesize to a u64 so that
btrfs_calc_trans_metadata_size() does a full 64-bit multiplication.
While we're here, do the same in btrfs_calc_trunc_metadata_size(); this
can't overflow with any existing uses, but it's better to be safe here
than have another hard-to-debug problem later on.
Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we have to recover relocation during mount, we'll ultimately have to
evict the orphan inode. That goes through the reservation dance, where
priority_reclaim_metadata_space and flush_space expect fs_info->fs_root
to be valid. That's the next thing to be set up during mount, so we
crash, almost always in flush_space trying to join the transaction
but priority_reclaim_metadata_space is possible as well. This call
path has been problematic in the past WRT whether ->fs_root is valid
yet. Commit 957780eb278 (Btrfs: introduce ticketed enospc
infrastructure) added new users that are called in the direct path
instead of the async path that had already been worked around.
The thing is that we don't actually need the fs_root, specifically, for
anything. We either use it to determine whether the root is the
chunk_root for use in choosing an allocation profile or as a root to pass
btrfs_join_transaction before immediately committing it. Anything that
isn't the chunk root works in the former case and any root works in
the latter.
A simple fix is to use a root we know will always be there: the
extent_root.
Fixes: 957780eb278 (Btrfs: introduce ticketed enospc infrastructure) Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we fail to add the space_info kobject, we'll leak the memory
for the percpu counter.
Fixes: 6ab0a2029c (btrfs: publish allocation data in sysfs) Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variables start_idx and end_idx are supposed to hold a page index
derived from the file offsets. The int type is not the right one though,
offsets larger than 1 << 44 will get silently trimmed off the high bits.
(1 << 44 is 16TiB)
What can go wrong, if start is below the boundary and end gets trimmed:
- if there's a page after start, we'll find it (radix_tree_gang_lookup_slot)
- the final check "if (page->index <= end_idx)" will unexpectedly fail
The function will return false, ie. "there's no page in the range",
although there is at least one.
btrfs_page_exists_in_range is used to prevent races in:
* in hole punching, where we make sure there are not pages in the
truncated range, otherwise we'll wait for them to finish and redo
truncation, but we're going to replace the pages with holes anyway so
the only problem is the intermediate state
* lock_extent_direct: we want to make sure there are no pages before we
lock and start DIO, to prevent stale data reads
For practical occurence of the bug, there are several constaints. The
file must be quite large, the affected range must cross the 16TiB
boundary and the internal state of the file pages and pending operations
must match. Also, we must not have started any ordered data in the
range, otherwise we don't even reach the buggy function check.
DIO locking tries hard in several places to avoid deadlocks with
buffered IO and avoids waiting for ranges. The worst consequence seems
to be stale data read.
CC: Liu Bo <bo.li.liu@oracle.com> Fixes: fc4adbff823f7 ("btrfs: Drop EXTENT_UPTODATE check in hole punching and direct locking") Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During an eeh call to cxl_remove can result in double free_irq of
psl,slice interrupts. This can happen if perst_reloads_same_image == 1
and call to cxl_configure_adapter() fails during slot_reset
callback. In such a case we see a kernel oops with following back-trace:
This patch fixes the issue of double free_irq by checking that
variables that hold the virqs (err_hwirq, serr_hwirq, psl_virq) are
not '0' before un-mapping and resetting these variables to '0' when
they are un-mapped.
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As it is, short copy in write() to append-only file will fail
to truncate the excessive allocated blocks. As the matter of
fact, all checks in ufs_truncate_blocks() are either redundant
or wrong for that caller. As for the only other caller
(ufs_evict_inode()), we only need the file type checks there.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In most cases, a cgroup controller don't care about the liftimes of
cgroups. For the controller, a css becomes online when ->css_online()
is called on it and offline when ->css_offline() is called.
However, cpuset is special in that the user interface it exposes cares
whether certain cgroups exist or not. Combined with the RCU delay
between cgroup removal and css offlining, this can lead to user
visible behavior oddities where operations which should succeed after
cgroup removals fail for some time period. The effects of cgroup
removals are delayed when seen from userland.
This patch adds css_is_dying() which tests whether offline is pending
and updates is_cpuset_online() so that the function returns false also
while offline is pending. This gets rid of the userland visible
delays.
The kill_css() function may be called more than once under the condition
that the css was killed but not physically removed yet followed by the
removal of the cgroup that is hosting the css. This patch prevents any
harmm from being done when that happens.
A rc device can call ir_raw_event_handle() after rc_allocate_device(),
but before rc_register_device() has completed. This is racey because
rcdev->raw is set before rcdev->raw->thread has a valid value.
Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(Correction in this resend: fixed function name acer_sa5_271_workaround; fixed
the always-true condition in the function; fixed description.)
On the Acer Switch Alpha 12 (model number: SA5-271), the internal SSD may not
get detected because the port_map and CAP.nr_ports combination causes the driver
to skip the port that is actually connected to the SSD. More specifically,
either all SATA ports are identified as DUMMY, or all ports get ``link down''
and never get up again.
This problem occurs occasionally. When this problem occurs, CAP may hold a
value of 0xC734FF00 or 0xC734FF01 and port_map may hold a value of 0x00 or 0x01.
When this problem does not occur, CAP holds a value of 0xC734FF02 and port_map
may hold a value of 0x07. Overriding the CAP value to 0xC734FF02 and port_map to
0x7 significantly reduces the occurrence of this problem.
Somehow the helper was never retrofitted for mdp5. Which meant when
plane_state->fence was added, it could get copied into new state in
mdp5_plane_duplicate_state().
If an update to disable the plane (for example on rmfb) managed to sneak
in after an nonblock update had swapped state, but before it was
committed, we'd get a splat:
Without this, polling on the dma-buf (and presumably other devices
synchronizing against our rendering) would return immediately, even
while the BO was busy.
Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rob Clark <robdclark@gmail.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
target: allow underflow/overflow for PR OUT etc. commands
to allow underflow/overflow for Windows compliance + FCP, a
consequence was to allow control CDBs to process overflow
data for iscsi-target with immediate data as well.
As per Roland's original change, continue to allow underflow
cases for control CDBs to make Windows compliance + FCP happy,
but until overflow for control CDBs is supported tree-wide,
explicitly reject all control WRITEs with overflow following
pre v4.3.y logic.
Reported-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For a driver that does not set the CPUFREQ_STICKY flag, if all of the
->init() calls fail, cpufreq_register_driver() should return an error.
This will prevent the driver from loading.
Fixes: ce1bcfe94db8 (cpufreq: check cpufreq_policy_list instead of scanning policies for all CPUs) Signed-off-by: David Arcari <darcari@redhat.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's possible that get_random_{u32,u64} is used before the crng has
initialized, in which case, its output might not be cryptographically
secure. For this problem, directly, this patch set is introducing the
*_wait variety of functions, but even with that, there's a subtle issue:
what happens to our batched entropy that was generated before
initialization. Prior to this commit, it'd stick around, supplying bad
numbers. After this commit, we force the entropy to be re-extracted
after each phase of the crng has initialized.
In order to avoid a race condition with the position counter, we
introduce a simple rwlock for this invalidation. Since it's only during
this awkward transition period, after things are all set up, we stop
using it, so that it doesn't have an impact on performance.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the introduction of .init_rq_fn() and .exit_rq_fn() it is
essential that the memory allocated for struct request_queue
stays around until all blk_exit_rl() calls have finished. Hence
make blk_init_rl() take a reference on struct request_queue.
In case oldtrig == trig == NULL (which happens when we set none
trigger, when there is already none set) there is a NULL pointer
dereference during iio_trigger_put(trig). Below is kernel output when
this occurs:
The register mapping for the IIO driver for the Liteon Light and Proximity
sensor LTR501 interrupt mode is interchanged (ALS/PS).
There is a register called INTERRUPT register (address 0x8F)
Bit 0 represents PS measurement trigger.
Bit 1 represents ALS measurement trigger.
This two bit fields are interchanged within the driver.
see datasheet page 24:
http://optoelectronics.liteon.com/upload/download/DS86-2012-0006/S_110_LTR-501ALS-01_PrelimDS_ver1%5B1%5D.pdf
The third argument of devm_request_threaded_irq() is the primary
handler. It is called in hardirq context and checks whether the
interrupt is relevant to the device. If the primary handler returns
IRQ_WAKE_THREAD, the secondary handler (a.k.a. handler thread) is
scheduled to run in process context.
bcm_iproc_adc.c uses the secondary handler as the primary one
and the other way around. So this patch fixes the same, along with
re-naming the secondary handler and primary handler names properly.
Tested on the BCM9583XX iProc SoC based boards.
Fixes: 4324c97ecedc ("iio: Add driver for Broadcom iproc-static-adc") Reported-by: Pavel Roskin <plroskin@gmail.com> Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lov_getstripe() calls set_fs(KERNEL_DS) so that it can handle a struct
lov_user_md pointer from user- or kernel-space. This changes the
behavior of copy_from_user() on SPARC and may result in a misaligned
access exception which in turn oopses the kernel. In fact the
relevant argument to lov_getstripe() is never called with a
kernel-space pointer and so changing the address limits is unnecessary
and so we remove the calls to save, set, and restore the address
limits.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/6150
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3221 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Li Wei <wei.g.li@intel.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix below NULL pointer dereference. we set ci->roles[CI_ROLE_GADGET]
too early in ci_hdrc_gadget_init(), if udc_start() fails due to some
reason, the ci->roles[CI_ROLE_GADGET] check in ci_hdrc_gadget_destroy
can't protect us.
We fix this issue by only setting ci->roles[CI_ROLE_GADGET] if
udc_start() succeed.
Unlike i.MX53, i.MX51's USBOH3 register file does not implemenent
registers past offset 0x018, which includes
MX53_USB_CLKONOFF_CTRL_OFFSET and trying to access that register on
said platform results in external abort.
Fix it by enabling CLKONOFF accessing codepath only for i.MX53.
Currently VBUS is turned off while a usb device is detached, and turned
on again by the polling routine. This short period VBUS loss prevents
usb modem to switch mode.
VBUS should be constantly on for host-only mode, so this changes the
driver to not turn off VBUS for host-only mode.
Fixes: 2f3fd2c5bde1 ("usb: musb: Prepare dsps glue layer for PM runtime support") Reported-by: Moreno Bartalucci <moreno.bartalucci@tecnorama.it> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
f_mass_storage has a memorry barrier issue with the sleep and wake
functions that can cause a deadlock. This results in intermittent hangs
during MSC file transfer. The host will reset the device after receiving
no response to resume the transfer. This issue is seen when dwc3 is
processing 2 transfer-in-progress events at the same time, invoking
completion handlers for CSW and CBW. Also this issue occurs depending on
the system timing and latency.
To increase the chance to hit this issue, you can force dwc3 driver to
wait and process those 2 events at once by adding a small delay (~100us)
in dwc3_check_event_buf() whenever the request is for CSW and read the
event count again. Avoid debugging with printk and ftrace as extra
delays and memory barrier will mask this issue.
Scenario which can lead to failure:
-----------------------------------
1) The main thread sleeps and waits for the next command in
get_next_command().
2) bulk_in_complete() wakes up main thread for CSW.
3) bulk_out_complete() tries to wake up the running main thread for CBW.
4) thread_wakeup_needed is not loaded with correct value in
sleep_thread().
5) Main thread goes to sleep again.
The pattern is shown below. Note the 2 critical variables.
* common->thread_wakeup_needed
* bh->state
CPU 0 (sleep_thread) CPU 1 (wakeup_thread)
============================== ===============================
bh->state = BH_STATE_FULL;
smp_wmb();
thread_wakeup_needed = 0; thread_wakeup_needed = 1;
smp_rmb();
if (bh->state != BH_STATE_FULL)
sleep again ...
As pointed out by Alan Stern, this is an R-pattern issue. The issue can
be seen when there are two wakeups in quick succession. The
thread_wakeup_needed can be overwritten in sleep_thread, and the read of
the bh->state maybe reordered before the write to thread_wakeup_needed.
This patch applies full memory barrier smp_mb() in both sleep_thread()
and wakeup_thread() to ensure the order which the thread_wakeup_needed
and bh->state are written and loaded.
However, a better solution in the future would be to use wait_queue
method that takes care of managing memory barrier between waker and
waiter.
Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a39be606f99d ("drm: Do a full device unregister when unplugging")
causes backtraces like this one when unplugging an usb drm device while
it is in use:
usb 2-3: USB disconnect, device number 25
------------[ cut here ]------------
WARNING: CPU: 0 PID: 242 at drivers/gpu/drm/drm_mode_config.c:424
drm_mode_config_cleanup+0x220/0x280 [drm]
...
RIP: 0010:drm_mode_config_cleanup+0x220/0x280 [drm]
...
Call Trace:
gm12u320_modeset_cleanup+0xe/0x10 [gm12u320]
gm12u320_driver_unload+0x35/0x70 [gm12u320]
drm_dev_unregister+0x3c/0xe0 [drm]
drm_unplug_dev+0x12/0x60 [drm]
gm12u320_usb_disconnect+0x36/0x40 [gm12u320]
usb_unbind_interface+0x72/0x280
device_release_driver_internal+0x158/0x210
device_release_driver+0x12/0x20
bus_remove_device+0x104/0x180
device_del+0x1d2/0x350
usb_disable_device+0x9f/0x270
usb_disconnect+0xc6/0x260
...
[drm:drm_mode_config_cleanup [drm]] *ERROR* connector Unknown-1 leaked!
------------[ cut here ]------------
WARNING: CPU: 0 PID: 242 at drivers/gpu/drm/drm_mode_config.c:458
drm_mode_config_cleanup+0x268/0x280 [drm]
...
<same Call Trace>
---[ end trace 80df975dae439ed6 ]---
general protection fault: 0000 [#1] SMP
...
Call Trace:
? __switch_to+0x225/0x450
drm_mode_rmfb_work_fn+0x55/0x70 [drm]
process_one_work+0x193/0x3c0
worker_thread+0x4a/0x3a0
...
RIP: drm_framebuffer_remove+0x62/0x3f0 [drm] RSP: ffffb776c39dfd98
---[ end trace 80df975dae439ed7 ]---
After which the system is unusable this is caused by drm_dev_unregister
getting called immediately on unplug, which calls the drivers unload
function which calls drm_mode_config_cleanup which removes the framebuffer
object while userspace is still holding a reference to it.
Reverting commit a39be606f99d ("drm: Do a full device unregister
when unplugging") leads to the following oops on unplug instead,
when userspace closes the last fd referencing the drm_dev:
sysfs group 'power' not found for kobject 'card1-Unknown-1'
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2459 at fs/sysfs/group.c:237
sysfs_remove_group+0x80/0x90
...
RIP: 0010:sysfs_remove_group+0x80/0x90
...
Call Trace:
dpm_sysfs_remove+0x57/0x60
device_del+0xfd/0x350
device_unregister+0x1a/0x60
drm_sysfs_connector_remove+0x39/0x50 [drm]
drm_connector_unregister+0x5a/0x70 [drm]
drm_connector_unregister_all+0x45/0xa0 [drm]
drm_modeset_unregister_all+0x12/0x30 [drm]
drm_dev_unregister+0xca/0xe0 [drm]
drm_put_dev+0x32/0x60 [drm]
drm_release+0x2f3/0x380 [drm]
__fput+0xdf/0x1e0
...
---[ end trace ecfb91ac85688bbe ]---
BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8
IP: down_write+0x1f/0x40
...
Call Trace:
debugfs_remove_recursive+0x55/0x1b0
drm_debugfs_connector_remove+0x21/0x40 [drm]
drm_connector_unregister+0x62/0x70 [drm]
drm_connector_unregister_all+0x45/0xa0 [drm]
drm_modeset_unregister_all+0x12/0x30 [drm]
drm_dev_unregister+0xca/0xe0 [drm]
drm_put_dev+0x32/0x60 [drm]
drm_release+0x2f3/0x380 [drm]
__fput+0xdf/0x1e0
...
---[ end trace ecfb91ac85688bbf ]---
This is caused by the revert moving back to drm_unplug_dev calling
drm_minor_unregister which does:
device_del(minor->kdev);
dev_set_drvdata(minor->kdev, NULL); /* safety belt */
drm_debugfs_cleanup(minor);
Causing the sysfs entries to already be removed even though we still
have references to them in e.g. drm_connector.
Note we must call drm_minor_unregister to notify userspace of the unplug
of the device, so calling drm_dev_unregister is not completely wrong the
problem is that drm_dev_unregister does too much.
This commit fixes drm_unplug_dev by not only reverting
commit a39be606f99d ("drm: Do a full device unregister when unplugging")
but by also adding a call to drm_modeset_unregister_all before the
drm_minor_unregister calls to make sure all sysfs entries are removed
before calling device_del(minor->kdev) thereby also fixing the second
set of oopses caused by just reverting the commit.
Fixes: a39be606f99d ("drm: Do a full device unregister when unplugging") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jeffy <jeffy.chen@rock-chips.com> Cc: Marco Diego Aurélio Mesquita <marcodiegomesquita@gmail.com> Reported-by: Marco Diego Aurélio Mesquita <marcodiegomesquita@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170601115430.4113-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, extent manipulation operations such as hole punch, range
zeroing, or extent shifting do not record the fact that file data has
changed and thus fdatasync(2) has a work to do. As a result if we crash
e.g. after a punch hole and fdatasync, user can still possibly see the
punched out data after journal replay. Test generic/392 fails due to
these problems.
Fix the problem by properly marking that file data has changed in these
operations.
Fixes: a4bb6b64e39abc0e41ca077725f2a72c868e7622 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When ext4_map_blocks() is called with EXT4_GET_BLOCKS_ZERO to zero-out
allocated blocks and these blocks are actually converted from unwritten
extent the following race can happen:
CPU0 CPU1
page fault page fault
... ...
ext4_map_blocks()
ext4_ext_map_blocks()
ext4_ext_handle_unwritten_extents()
ext4_ext_convert_to_initialized()
- zero out converted extent
ext4_zeroout_es()
- inserts extent as initialized in status tree
ext4_map_blocks()
ext4_es_lookup_extent()
- finds initialized extent
write data
ext4_issue_zeroout()
- zeroes out new extent overwriting data
This problem can be reproduced by generic/340 for the fallocated case
for the last block in the file.
Fix the problem by avoiding zeroing out the area we are mapping with
ext4_map_blocks() in ext4_ext_convert_to_initialized(). It is pointless
to zero out this area in the first place as the caller asked us to
convert the area to initialized because he is just going to write data
there before the transaction finishes. To achieve this we delete the
special case of zeroing out full extent as that will be handled by the
cases below zeroing only the part of the extent that needs it. We also
instruct ext4_split_extent() that the middle of extent being split
contains data so that ext4_split_extent_at() cannot zero out full extent
in case of ENOSPC.
Fixes: 12735f881952c32b31bc4e433768f18489f79ec9 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, SEEK_HOLE implementation in ext4 may both return that there's
a hole at some offset although that offset already has data and skip
some holes during a search for the next hole. The first problem is
demostrated by:
xfs_io -c "falloc 0 256k" -c "pwrite 0 56k" -c "seek -h 0" file
wrote 57344/57344 bytes at offset 0
56 KiB, 14 ops; 0.0000 sec (2.054 GiB/sec and 538461.5385 ops/sec)
Whence Result
HOLE 0
Where we can see that SEEK_HOLE wrongly returned offset 0 as containing
a hole although we have written data there. The second problem can be
demonstrated by:
wrote 57344/57344 bytes at offset 0
56 KiB, 14 ops; 0.0000 sec (1.978 GiB/sec and 518518.5185 ops/sec)
wrote 8192/8192 bytes at offset 131072
8 KiB, 2 ops; 0.0000 sec (2 GiB/sec and 500000.0000 ops/sec)
Whence Result
HOLE 139264
Where we can see that hole at offsets 56k..128k has been ignored by the
SEEK_HOLE call.
The underlying problem is in the ext4_find_unwritten_pgoff() which is
just buggy. In some cases it fails to update returned offset when it
finds a hole (when no pages are found or when the first found page has
higher index than expected), in some cases conditions for detecting hole
are just missing (we fail to detect a situation where indices of
returned pages are not contiguous).
Fix ext4_find_unwritten_pgoff() to properly detect non-contiguous page
indices and also handle all cases where we got less pages then expected
in one place and handle it properly there.
Fixes: c8c0df241cc2719b1262e627f999638411934f60 CC: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 5995a68 "xen/privcmd: Add support for Linux 64KB page granularity" did
not go far enough to support 64KB in mmap_batch_fn.
The variable 'nr' is the number of 4KB chunk to map. However, when Linux
is using 64KB page granularity the array of pages (vma->vm_private_data)
contain one page per 64KB. Fix it by incrementing st->index correctly.
Furthermore, st->va is not correctly incremented as PAGE_SIZE !=
XEN_PAGE_SIZE.
Fixes: 5995a68 ("xen/privcmd: Add support for Linux 64KB page granularity") Reported-by: Feng Kan <fkan@apm.com> Signed-off-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to Boris, some user-space tools expect MTD drivers to
update ecc_stats.corrected, and it's better to provide a lower
bound than to provide no information at all.
Fixes: 6956e2385a16 ("mtd: nand: add tango NAND flash controller support") Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device table is required to load modules based on
modaliases. After adding MODULE_DEVICE_TABLE, below entries
for example will be added to module.alias:
alias: of:N*T*Csigma,smp8758-nandC*
alias: of:N*T*Csigma,smp8758-nand
Fixes: 6956e2385a16 ("mtd: nand: add tango NAND flash controller support") Signed-off-by: Andres Galacho <andresgalacho@gmail.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit b685d3d65ac7 "block: treat REQ_FUA and REQ_PREFLUSH as
synchronous" removed REQ_SYNC flag from WRITE_{FUA|PREFLUSH|...}
definitions. generic_make_request_checks() however strips REQ_FUA and
REQ_PREFLUSH flags from a bio when the storage doesn't report volatile
write cache and thus write effectively becomes asynchronous which can
lead to performance regressions
Fix the problem by making sure all bios which are synchronous are
properly marked with REQ_SYNC.
Fixes: b685d3d65ac791406e0dfd8779cc9b3707fea5a3 CC: reiserfs-devel@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When adding a cfq_group into the cfq service tree, we use CFQ_IDLE_DELAY
as the delay of cfq_group's vdisktime if there have been other cfq_groups
already.
When cfq is under iops mode, commit 9a7f38c42c2b ("cfq-iosched: Convert
from jiffies to nanoseconds") could result in a large iops delay and
lead to an abnormal io schedule delay for the added cfq_group. To fix
it, we just need to revert to the old CFQ_IDLE_DELAY value: HZ / 5
when iops mode is enabled.
Despite having the same value, the delay of a cfq_queue in idle class
and the delay of cfq_group are different things, so I define two new
macros for the delay of a cfq_group under time-slice mode and iops mode.
Fixes: 9a7f38c42c2b ("cfq-iosched: Convert from jiffies to nanoseconds") Signed-off-by: Hou Tao <houtao1@huawei.com> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>