The fix to make WARN work in the early boot code created a problem
on older machines without EDAT-1. The setup_lowcore_dat_on function
uses the pointer from lowcore_ptr[0] to set the DAT bit in the new
PSWs. That does not work if the kernel page table is set up with
4K pages as the prefix address maps to absolute zero.
To make this work the PSWs need to be changed with via address 0 in
form of the S390_lowcore definition.
Regarding segments with a limit==0xffffffff, the SDM officially states:
When the effective limit is FFFFFFFFH (4 GBytes), these accesses may
or may not cause the indicated exceptions. Behavior is
implementation-specific and may vary from one execution to another.
In practice, all CPUs that support VMX ignore limit checks for "flat
segments", i.e. an expand-up data or code segment with base=0 and
limit=0xffffffff. This is subtly different than wrapping the effective
address calculation based on the address size, as the flat segment
behavior also applies to accesses that would wrap the 4g boundary, e.g.
a 4-byte access starting at 0xffffffff will access linear addresses
0xffffffff, 0x0, 0x1 and 0x2.
Fixes: f9eb4af67c9d ("KVM: nVMX: VMX instructions: add checks for #GP/#SS exceptions") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The address size of an instruction affects the effective address, not
the virtual/linear address. The final address may still be truncated,
e.g. to 32-bits outside of long mode, but that happens irrespective of
the address size, e.g. a 32-bit address size can yield a 64-bit virtual
address when using FS/GS with a non-zero base.
Fixes: 064aea774768 ("KVM: nVMX: Decoding memory operands of VMX instructions") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The VMCS.EXIT_QUALIFCATION field reports the displacements of memory
operands for various instructions, including VMX instructions, as a
naturally sized unsigned value, but masks the value by the addr size,
e.g. given a ModRM encoded as -0x28(%ebp), the -0x28 displacement is
reported as 0xffffffd8 for a 32-bit address size. Despite some weird
wording regarding sign extension, the SDM explicitly states that bits
beyond the instructions address size are undefined:
In all cases, bits of this field beyond the instruction’s address
size are undefined.
Failure to sign extend the displacement results in KVM incorrectly
treating a negative displacement as a large positive displacement when
the address size of the VMX instruction is smaller than KVM's native
size, e.g. a 32-bit address size on a 64-bit KVM.
The very original decoding, added by commit 064aea774768 ("KVM: nVMX:
Decoding memory operands of VMX instructions"), sort of modeled sign
extension by truncating the final virtual/linear address for a 32-bit
address size. I.e. it messed up the effective address but made it work
by adjusting the final address.
When segmentation checks were added, the truncation logic was kept
as-is and no sign extension logic was introduced. In other words, it
kept calculating the wrong effective address while mostly generating
the correct virtual/linear address. As the effective address is what's
used in the segment limit checks, this results in KVM incorreclty
injecting #GP/#SS faults due to non-existent segment violations when
a nested VMM uses negative displacements with an address size smaller
than KVM's native address size.
Using the -0x28(%ebp) example, an EBP value of 0x1000 will result in
KVM using 0x100000fd8 as the effective address when checking for a
segment limit violation. This causes a 100% failure rate when running
a 32-bit KVM build as L1 on top of a 64-bit KVM L0.
Fixes: f9eb4af67c9d ("KVM: nVMX: VMX instructions: add checks for #GP/#SS exceptions") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When installing new memslots, KVM sets bit 0 of the generation number to
indicate that an update is in-progress. Until the update is complete,
there are no guarantees as to whether a vCPU will see the old or the new
memslots. Explicity prevent caching MMIO accesses so as to avoid using
an access cached from the old memslots after the new memslots have been
installed.
Note that it is unclear whether or not disabling caching during the
update window is strictly necessary as there is no definitive
documentation as to what ordering guarantees KVM provides with respect
to updating memslots. That being said, the MMIO spte code does not
allow reusing sptes created while an update is in-progress, and the
associated documentation explicitly states:
We do not want to use an MMIO sptes created with an odd generation
number, ... If KVM is unlucky and creates an MMIO spte while the
low bit is 1, the next access to the spte will always be a cache miss.
At the very least, disabling the per-vCPU MMIO cache during updates will
make its behavior consistent with the MMIO spte behavior and
documentation.
Fixes: 56f17dd3fbc4 ("kvm: x86: fix stale mmio cache bug") Cc: <stable@vger.kernel.org> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The check to detect a wrap of the MMIO generation explicitly looks for a
generation number of zero. Now that unique memslots generation numbers
are assigned to each address space, only address space 0 will get a
generation number of exactly zero when wrapping. E.g. when address
space 1 goes from 0x7fffe to 0x80002, the MMIO generation number will
wrap to 0x2. Adjust the MMIO generation to strip the address space
modifier prior to checking for a wrap.
Fixes: 4bd518f1598d ("KVM: use separate generations for each address space") Cc: <stable@vger.kernel.org> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kvm_arch_memslots_updated() is at this point in time an x86-specific
hook for handling MMIO generation wraparound. x86 stashes 19 bits of
the memslots generation number in its MMIO sptes in order to avoid
full page fault walks for repeat faults on emulated MMIO addresses.
Because only 19 bits are used, wrapping the MMIO generation number is
possible, if unlikely. kvm_arch_memslots_updated() alerts x86 that
the generation has changed so that it can invalidate all MMIO sptes in
case the effective MMIO generation has wrapped so as to avoid using a
stale spte, e.g. a (very) old spte that was created with generation==0.
Given that the purpose of kvm_arch_memslots_updated() is to prevent
consuming stale entries, it needs to be called before the new generation
is propagated to memslots. Invalidating the MMIO sptes after updating
memslots means that there is a window where a vCPU could dereference
the new memslots generation, e.g. 0, and incorrectly reuse an old MMIO
spte that was created with (pre-wrap) generation==0.
Fixes: e59dbe09f8e6 ("KVM: Introduce kvm_arch_memslots_updated()") Cc: <stable@vger.kernel.org> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add missing break statement in order to prevent the code from falling
through to case CB_TARGET_MASK.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: dd220a00e8bd ("drm/radeon/kms: add support for streamout v7") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move upstream stream off to just after receiving the last EOF completion
and disabling the CSI (and thus before disabling the IDMA channel) in
csi_stop(). For symmetry also move upstream stream on to beginning of
csi_start().
Doing this makes csi_s_stream() more symmetric with prp_s_stream() which
will require the same change to fix a hard lockup.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Cc: stable@vger.kernel.org # for 4.13 and up Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Disable the CSI immediately after receiving the last EOF before stream
off (and thus before disabling the IDMA channel). Do this by moving the
wait for EOF completion into a new function csi_idmac_wait_last_eof().
This fixes a complete system hard lockup on the SabreAuto when streaming
from the ADV7180, by repeatedly sending a stream off immediately followed
by stream on:
while true; do v4l2-ctl -d4 --stream-mmap --stream-count=3; done
Eventually this either causes the system lockup or EOF timeouts at all
subsequent stream on, until a system reset.
The lockup occurs when disabling the IDMA channel at stream off. Disabling
the CSI before disabling the IDMA channel appears to be a reliable fix for
the hard lockup.
Fixes: 4a34ec8e470cb ("[media] media: imx: Add CSI subdev driver") Reported-by: Gaël PORTAY <gael.portay@collabora.com> Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Cc: stable@vger.kernel.org # for 4.13 and up Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a linear pipeline logic for the stream control. It's created by
walking backwards on the entity graph. When the stream starts it will
simply loop through the pipeline calling the respective process_frame
function of each entity.
Fixes: f2fe89061d797 ("vimc: Virtual Media Controller core, capture
and sensor")
Cc: stable@vger.kernel.org # for v4.20 Signed-off-by: Lucas A. M. Magalhães <lucmaga@gmail.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: fixed small space-after-tab issue in the patch] Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The UVC video driver converts the timestamp from hardware specific unit
to one known by the kernel at the time when the buffer is dequeued. This
is fine in general, but the streamoff operation consists of the
following steps (among other things):
1. uvc_video_clock_cleanup --- the hardware clock sample array is
released and the pointer to the array is set to NULL,
2. buffers in active state are returned to the user and
3. buf_finish callback is called on buffers that are prepared.
buf_finish includes calling uvc_video_clock_update that accesses the
hardware clock sample array.
The above is serialised by a queue specific mutex. Address the problem
by skipping the clock conversion if the hardware clock sample array is
already released.
Upstream must be stopped immediately after receiving the last EOF and
before disabling the IDMA channel. This can be accomplished by moving
upstream stream off to just after receiving the last EOF completion in
prp_stop(). For symmetry also move upstream stream on to end of
prp_start().
This fixes a complete system hard lockup on the SabreAuto when streaming
from the ADV7180, by repeatedly sending a stream off immediately followed
by stream on:
while true; do v4l2-ctl -d1 --stream-mmap --stream-count=3; done
Eventually this either causes the system lockup or EOF timeouts at all
subsequent stream on, until a system reset.
The lockup occurs when disabling the IDMA channel at stream off. Stopping
the video data stream entering the IDMA channel before disabling the
channel itself appears to be a reliable fix for the hard lockup.
Fixes: f0d9c8924e2c3 ("[media] media: imx: Add IC subdev drivers") Reported-by: Gaël PORTAY <gael.portay@collabora.com> Tested-by: Gaël PORTAY <gael.portay@collabora.com> Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Cc: stable@vger.kernel.org # for 4.13 and up Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rcu_gp_kthread_wake() function is invoked when it might be necessary
to wake the RCU grace-period kthread. Because self-wakeups are normally
a useless waste of CPU cycles, if rcu_gp_kthread_wake() is invoked from
this kthread, it naturally refuses to do the wakeup.
Unfortunately, natural though it might be, this heuristic fails when
rcu_gp_kthread_wake() is invoked from an interrupt or softirq handler
that interrupted the grace-period kthread just after the final check of
the wait-event condition but just before the schedule() call. In this
case, a wakeup is required, even though the call to rcu_gp_kthread_wake()
is within the RCU grace-period kthread's context. Failing to provide
this wakeup can result in grace periods failing to start, which in turn
results in out-of-memory conditions.
This race window is quite narrow, but it actually did happen during real
testing. It would of course need to be fixed even if it was strictly
theoretical in nature.
This patch does not Cc stable because it does not apply cleanly to
earlier kernel versions.
Fixes: 48a7639ce80c ("rcu: Make callers awaken grace-period kthread") Reported-by: "He, Bo" <bo.he@intel.com> Co-developed-by: "Zhang, Jun" <jun.zhang@intel.com> Co-developed-by: "He, Bo" <bo.he@intel.com> Co-developed-by: "xiao, jin" <jin.xiao@intel.com> Co-developed-by: Bai, Jie A <jie.a.bai@intel.com>
Signed-off: "Zhang, Jun" <jun.zhang@intel.com>
Signed-off: "He, Bo" <bo.he@intel.com>
Signed-off: "xiao, jin" <jin.xiao@intel.com>
Signed-off: Bai, Jie A <jie.a.bai@intel.com> Signed-off-by: "Zhang, Jun" <jun.zhang@intel.com>
[ paulmck: Switch from !in_softirq() to "!in_interrupt() &&
!in_serving_softirq() to avoid redundant wakeups and to also handle the
interrupt-handler scenario as well as the softirq-handler scenario that
actually occurred in testing. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Link: https://lkml.kernel.org/r/CD6925E8781EFD4D8E11882D20FC406D52A11F61@SHSMSX104.ccr.corp.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The send() callback should never return length as it does not in every
driver except tpm_crb in the success case. The reason is that the main
transmit functionality only cares about whether the transmit was
successful or not and ignores the count completely.
Suggested-by: Stefan Berger <stefanb@linux.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current approach to read first 6 bytes from the response and then tail
of the response, can cause the 2nd memcpy_fromio() to do an unaligned read
(e.g. read 32-bit word from address aligned to a 16-bits), depending on how
memcpy_fromio() is implemented. If this happens, the read will fail and the
memory controller will fill the read with 1's.
This was triggered by 170d13ca3a2f, which should be probably refined to
check and react to the address alignment. Before that commit, on x86
memcpy_fromio() turned out to be memcpy(). By a luck GCC has done the right
thing (from tpm_crb's perspective) for us so far, but we should not rely on
that. Thus, it makes sense to fix this also in tpm_crb, not least because
the fix can be then backported to stable kernels and make them more robust
when compiled in differing environments.
Cc: stable@vger.kernel.org Cc: James Morris <jmorris@namei.org> Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Jerry Snitselaar <jsnitsel@redhat.com> Fixes: 30fc8d138e91 ("tpm: TPM 2.0 CRB Interface") Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CYC packet timestamp calculation depends upon CBR which was being
cleared upon overflow (OVF). That can cause errors due to failing to
synchronize with sideband events. Even if a CBR change has been lost,
the old CBR is still a better estimate than zero. So remove the clearing
of CBR.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20190206103947.15750-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .orc_unwind section is a packed array of 6-byte structs. It's
currently aligned to 6 bytes, which is causing warnings in the LLD
linker.
Six isn't a power of two, so it's not a valid alignment value. The
actual alignment doesn't matter much because it's an array of packed
structs. An alignment of two is sufficient. In reality it always gets
aligned to four bytes because it comes immediately after the
4-byte-aligned .orc_unwind_ip section.
We have observed it where both:
1) LVM/devmapper is involved (bcache backing device is LVM volume) and
2) writeback cache is involved (bcache cache_mode is writeback)
On one machine, we can reliably reproduce it with:
# echo writeback > /sys/block/bcache0/bcache/cache_mode
(not sure whether above line is required)
# mount /dev/bcache0 /test
# for i in {0..10}; do
file="$(mktemp /test/zero.XXX)"
dd if=/dev/zero of="$file" bs=1M count=256
sync
rm $file
done
# fstrim -v /test
Observing this with tracepoints on, we see the following writes:
Note the final one has different hit/bypass flags.
This is because in should_writeback(), we were hitting a case where
the partial stripe condition was returning true and so
should_writeback() was returning true early.
If that hadn't been the case, it would have hit the would_skip test, and
as would_skip == s->iop.bypass == true, should_writeback() would have
returned false.
Looking at the git history from 'commit 72c270612bd3 ("bcache: Write out
full stripes")', it looks like the idea was to optimise for raid5/6:
* If a stripe is already dirty, force writes to that stripe to
writeback mode - to help build up full stripes of dirty data
To fix this issue, make sure that should_writeback() on a discard op
never returns true.
More details of debugging:
https://www.spinics.net/lists/linux-bcache/msg06996.html
If wakeup_source_add() is called right after wakeup_source_remove()
for the same wakeup source, timer_setup() may be called for a
potentially scheduled timer which is incorrect.
To avoid that, move the wakeup source timer cancellation from
wakeup_source_drop() to wakeup_source_remove().
Moreover, make wakeup_source_remove() clear the timer function after
canceling the timer to let wakeup_source_not_registered() treat
unregistered wakeup sources in the same way as the ones that have
never been registered.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.4+ <stable@vger.kernel.org> # 4.4+
[ rjw: Subject, changelog, merged two patches together ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we have to retransmit a request, we should ensure that we reinitialise
the sequence results structure, since in the event of a signal
we need to treat the request as if it had not been sent.
Commit 62a063b8e7d1 "nfsd4: fix crash on writing v4_end_grace before
nfsd startup" is trying to fix a NULL dereference issue, but it
mistakenly checks if the nfsd server is started. So fix it.
Fixes: 62a063b8e7d1 "nfsd4: fix crash on writing v4_end_grace before nfsd startup" Cc: stable@vger.kernel.org Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: Yihao Wu <wuyihao@linux.alibaba.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the result of an NFSv3 readdir{,plus} request results in the
"offset" on one entry having to be split across 2 pages, and is sized
so that the next directory entry doesn't fit in the requested size,
then memory corruption can happen.
When encode_entry() is called after encoding the last entry that fits,
it notices that ->offset and ->offset1 are set, and so stores the
offset value in the two pages as required. It clears ->offset1 but
*does not* clear ->offset.
Normally this omission doesn't matter as encode_entry_baggage() will
be called, and will set ->offset to a suitable value (not on a page
boundary).
But in the case where cd->buflen < elen and nfserr_toosmall is
returned, ->offset is not reset.
This means that nfsd3proc_readdirplus will see ->offset with a value 4
bytes before the end of a page, and ->offset1 set to NULL.
It will try to write 8bytes to ->offset.
If we are lucky, the next page will be read-only, and the system will
BUG: unable to handle kernel paging request at...
If we are unlucky, some innocent page will have the first 4 bytes
corrupted.
nfsd3proc_readdir() doesn't even check for ->offset1, it just blindly
writes 8 bytes to the offset wherever it is.
Fix this by clearing ->offset after it is used, and copying the
->offset handling code from nfsd3_proc_readdirplus into
nfsd3_proc_readdir.
(Note that the commit hash in the Fixes tag is from the 'history'
tree - this bug predates git).
When we fail to add the request to the I/O queue, we currently leave it
to the caller to free the failed request. However since some of the
requests that fail are actually created by nfs_pageio_add_request()
itself, and are not passed back the caller, this leads to a leakage
issue, which can again cause page locks to leak.
This commit addresses the leakage by freeing the created requests on
error, using desc->pg_completion_ops->error_cleanup()
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Fixes: a7d42ddb30997 ("nfs: add mirroring support to pgio layer") Cc: stable@vger.kernel.org # v4.0: c18b96a1b862: nfs: clean up rest of reqs Cc: stable@vger.kernel.org # v4.0: d600ad1f2bdb: NFS41: pop some layoutget Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using dm-integrity underneath md-raid, some tests with raid
auto-correction trigger large amounts of integrity failures - and all
these failures print an error message. These messages can bring the
system to a halt if the system is using serial console.
Fix this by limiting the rate of error messages - it improves the speed
of raid recovery and avoids the hang.
A dm-raid array with devices larger than 4GB won't assemble on
a 32 bit host since _check_data_dev_sectors() was added in 4.16.
This is because to_sector() treats its argument as an "unsigned long"
which is 32bits (4GB) on a 32bit host. Using "unsigned long long"
is more correct.
Kernels as early as 4.2 can have other problems due to to_sector()
being used on the size of a device.
Fixes: 0cf4503174c1 ("dm raid: add support for the MD RAID0 personality")
cc: stable@vger.kernel.org (v4.2+) Reported-and-tested-by: Guillaume Perréal <gperreal@free.fr> Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Due to what looks like a typo dating back to the original addition
of FPEXC32_EL2 handling, KVM currently initialises this register to
an architecturally invalid value.
As a result, the VECITR field (RES1) in bits [10:8] is initialised
with 0, and the two reserved (RES0) bits [6:5] are initialised with
1. (In the Common VFP Subarchitecture as specified by ARMv7-A,
these two bits were IMP DEF. ARMv8-A removes them.)
This patch changes the reset value from 0x70 to 0x700, which
reflects the architectural constraints and is presumably what was
originally intended.
Cc: <stable@vger.kernel.org> # 4.12.x- Cc: Christoffer Dall <christoffer.dall@arm.com> Fixes: 62a89c44954f ("arm64: KVM: 32bit handling of coprocessor traps") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Debug exception handlers may be called for exceptions generated both by
user and kernel code. In many cases, this is checked explicitly, but
in other cases things either happen to work by happy accident or they
go slightly wrong. For example, executing 'brk #4' from userspace will
enter the kprobes code and be ignored, but the instruction will be
retried forever in userspace instead of delivering a SIGTRAP.
Fix this issue in the most stable-friendly fashion by simply adding
explicit checks of the triggering exception level to all of our debug
exception handlers.
Cc: <stable@vger.kernel.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using VHE, the host needs to clear HCR_EL2.TGE bit in order
to interact with guest TLBs, switching from EL2&0 translation regime
to EL1&0.
However, some non-maskable asynchronous event could happen while TGE is
cleared like SDEI. Because of this address translation operations
relying on EL2&0 translation regime could fail (tlb invalidation,
userspace access, ...).
Fix this by properly setting HCR_EL2.TGE when entering NMI context and
clear it if necessary when returning to the interrupted context.
Signed-off-by: Julien Thierry <julien.thierry@arm.com> Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: James Morse <james.morse@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: James Morse <james.morse@arm.com> Cc: linux-arch@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks like book3s/32 doesn't set RI on machine check, so
checking RI before calling die() will always be fatal
allthought this is not an issue in most cases.
Fixes: b96672dd840f ("powerpc: Machine check interrupt is a non-maskable interrupt") Fixes: daf00ae71dad ("powerpc/traps: restore recoverability of machine_check interrupts") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Cc: stable@vger.kernel.org Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We added runtime allocation of 16G pages in commit 4ae279c2c96a
("powerpc/mm/hugetlb: Allow runtime allocation of 16G.") That was done
to enable 16G allocation on PowerNV and KVM config. In case of KVM
config, we mostly would have the entire guest RAM backed by 16G
hugetlb pages for this to work. PAPR do support partial backing of
guest RAM with hugepages via ibm,expected#pages node of memory node in
the device tree. This means rest of the guest RAM won't be backed by
16G contiguous pages in the host and hence a hash page table insertion
can fail in such case.
An example error message will look like
hash-mmu: mm: Hashing failure ! EA=0x7efc00000000 access=0x8000000000000006 current=readback
hash-mmu: trap=0x300 vsid=0x67af789 ssize=1 base psize=14 psize 14 pte=0xc000000400000386
readback[12260]: unhandled signal 7 at 00007efc00000000 nip 00000000100012d0 lr 000000001000127c code 2
This patch address that by preventing runtime allocation of 16G
hugepages in LPAR config. To allocate 16G hugetlb one need to kernel
command line hugepagesz=16G hugepages=<number of 16G pages>
With radix translation mode we don't run into this issue.
This change will prevent runtime allocation of 16G hugetlb pages on
kvm with hash translation mode. However, with the current upstream it
was observed that 16G hugetlbfs backed guest doesn't boot at all.
We observe boot failure with the below message:
[131354.647546] KVM: map_vrma at 0 failed, ret=-4
That means this patch is not resulting in an observable regression.
Once we fix the boot issue with 16G hugetlb backed memory, we need to
use ibm,expected#pages memory node attribute to indicate 16G page
reservation to the guest. This will also enable partial backing of
guest RAM with 16G pages.
GCC 8 warns about the logic in vr_get/set(), which with -Werror breaks
the build:
In function ‘user_regset_copyin’,
inlined from ‘vr_set’ at arch/powerpc/kernel/ptrace.c:628:9:
include/linux/regset.h:295:4: error: ‘memcpy’ offset [-527, -529] is
out of the bounds [0, 16] of object ‘vrsave’ with type ‘union
<anonymous>’ [-Werror=array-bounds]
arch/powerpc/kernel/ptrace.c: In function ‘vr_set’:
arch/powerpc/kernel/ptrace.c:623:5: note: ‘vrsave’ declared here
} vrsave;
This has been identified as a regression in GCC, see GCC bug 88273.
However we can avoid the warning and also simplify the logic and make
it more robust.
Currently we pass -1 as end_pos to user_regset_copyout(). This says
"copy up to the end of the regset".
The definition of the regset is:
[REGSET_VMX] = {
.core_note_type = NT_PPC_VMX, .n = 34,
.size = sizeof(vector128), .align = sizeof(vector128),
.active = vr_active, .get = vr_get, .set = vr_set
},
The end is calculated as (n * size), ie. 34 * sizeof(vector128).
In vr_get/set() we pass start_pos as 33 * sizeof(vector128), meaning
we can copy up to sizeof(vector128) into/out-of vrsave.
The on-stack vrsave is defined as:
union {
elf_vrreg_t reg;
u32 word;
} vrsave;
And elf_vrreg_t is:
typedef __vector128 elf_vrreg_t;
So there is no bug, but we rely on all those sizes lining up,
otherwise we would have a kernel stack exposure/overwrite on our
hands.
Rather than relying on that we can pass an explict end_pos based on
the sizeof(vrsave). The result should be exactly the same but it's
more obviously not over-reading/writing the stack and it avoids the
compiler warning.
Reported-by: Meelis Roos <mroos@linux.ee> Reported-by: Mathieu Malaterre <malat@debian.org> Cc: stable@vger.kernel.org Tested-by: Mathieu Malaterre <malat@debian.org> Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 8792468da5e1 "powerpc: Add the ability to save FPU without
giving it up" unexpectedly removed the MSR_FE0 and MSR_FE1 bits from
the bitmask used to update the MSR of the previous thread in
__giveup_fpu() causing a KVM-PR MacOS guest to lockup and panic the
host kernel.
Leaving FE0/1 enabled means unrelated processes might receive FPEs
when they're not expecting them and crash. In particular if this
happens to init the host will then panic.
eg (transcribed):
qemu-system-ppc[837]: unhandled signal 8 at 12cc9ce4 nip 12cc9ce4 lr 12cc9ca4 code 0
systemd[1]: unhandled signal 8 at 202f02e0 nip 202f02e0 lr 001003d4 code 0
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Reinstate these bits to the MSR bitmask to enable MacOS guests to run
under 32-bit KVM-PR once again without issue.
Fixes: 8792468da5e1 ("powerpc: Add the ability to save FPU without giving it up") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the opal log is globally readable. It is kernel policy to
limit the visibility of physical addresses / kernel pointers to root.
Given this and the fact the opal log may contain this information it
would be better to limit the readability to root.
Fixes: bfc36894a48b ("powerpc/powernv: Add OPAL message log interface") Cc: stable@vger.kernel.org # v3.15+ Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Reviewed-by: Stewart Smith <stewart@linux.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'nobats' kernel parameter or some options like CONFIG_DEBUG_PAGEALLOC
deny the use of BATS for mapping memory.
This patch makes sure that the specific wii RAM mapping function
takes it into account as well.
Fixes: de32400dd26e ("wii: use both mem1 and mem2 as ram") Cc: stable@vger.kernel.org Reviewed-by: Jonathan Neuschafer <j.neuschaefer@gmx.net> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the case when we're reusing a superblock, selinux_sb_clone_mnt_opts()
fails to set set_kern_flags, with the result that
nfs_clone_sb_security() incorrectly clears NFS_CAP_SECURITY_LABEL.
The result is that if you mount the same NFS filesystem twice, NFS
security labels are turned off, even if they would work fine if you
mounted the filesystem only once.
("fixes" may be not exactly the right tag, it may be more like
"fixed-other-cases-but-missed-this-one".)
Cc: Scott Mayhew <smayhew@redhat.com> Cc: stable@vger.kernel.org Fixes: 0b4d3452b8b4 "security/selinux: allow security_sb_clone_mnt_opts..." Signed-off-by: J. Bruce Fields <bfields@redhat.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The jh pointer may be used uninitialized in the two cases below and the
compiler complain about it when enabling JBUFFER_TRACE macro, fix them.
In file included from fs/jbd2/transaction.c:19:0:
fs/jbd2/transaction.c: In function ‘jbd2_journal_get_undo_access’:
./include/linux/jbd2.h:1637:38: warning: ‘jh’ is used uninitialized in this function [-Wuninitialized]
#define JBUFFER_TRACE(jh, info) do { printk("%s: %d\n", __func__, jh->b_jcount);} while (0)
^
fs/jbd2/transaction.c:1219:23: note: ‘jh’ was declared here
struct journal_head *jh;
^
In file included from fs/jbd2/transaction.c:19:0:
fs/jbd2/transaction.c: In function ‘jbd2_journal_dirty_metadata’:
./include/linux/jbd2.h:1637:38: warning: ‘jh’ may be used uninitialized in this function [-Wmaybe-uninitialized]
#define JBUFFER_TRACE(jh, info) do { printk("%s: %d\n", __func__, jh->b_jcount);} while (0)
^
fs/jbd2/transaction.c:1332:23: note: ‘jh’ was declared here
struct journal_head *jh;
^
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now, we capture a data corruption problem on ext4 while we're truncating
an extent index block. Imaging that if we are revoking a buffer which
has been journaled by the committing transaction, the buffer's jbddirty
flag will not be cleared in jbd2_journal_forget(), so the commit code
will set the buffer dirty flag again after refile the buffer.
Finally, if the freed extent index block was allocated again as data
block by some other files, it may corrupt the file data after writing
cached pages later, such as during unmount time. (In general,
clean_bdev_aliases() related helpers should be invoked after
re-allocation to prevent the above corruption, but unfortunately we
missed it when zeroout the head of extra extent blocks in
ext4_ext_handle_unwritten_extents()).
This patch mark buffer as freed and set j_next_transaction to the new
transaction when it already belongs to the committing transaction in
jbd2_journal_forget(), so that commit code knows it should clear dirty
bits when it is done with the buffer.
This problem can be reproduced by xfstests generic/455 easily with
seeds (3246 3247 3248 3249).
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are two other drivers that bind to mrvl,mmp-uart and both of them
assume register shift of 2 bits. There are device trees that lack the
property and rely on that assumption.
If this driver wins the race to bind to those devices, it should behave
the same as the older deprecated driver.
If RX is disabled while there are still unprocessed bytes in RX FIFO,
cdns_uart_handle_rx() called from interrupt handler will get stuck in
the receive loop as read bytes will not get removed from the RX FIFO
and CDNS_UART_SR_RXEMPTY bit will never get set.
Avoid the stuck handler by checking first if RX is disabled. port->lock
protects against race with RX-disabling functions.
This HW behavior was mentioned by Nathan Rossi in 43e98facc4a3 ("tty:
xuartps: Fix RX hang, and TX corruption in termios call") which fixed a
similar issue in cdns_uart_set_termios().
The behavior can also be easily verified by e.g. setting
CDNS_UART_CR_RX_DIS at the beginning of cdns_uart_handle_rx() - the
following loop will then get stuck.
Resetting the FIFO using RXRST would not set RXEMPTY either so simply
issuing a reset after RX-disable would not work.
I observe this frequently on a ZynqMP board during heavy RX load at 1M
baudrate when the reader process exits and thus RX gets disabled.
Fixes: 61ec9016988f ("tty/serial: add support for Xilinx PS UART") Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Legacy behaviour was to allow non-page-aligned mmap requests, as does the
linux mmap(2) implementation by virtue of automatically rounding up for
the caller.
To avoid breaking legacy userspace relax the newly introduced fix.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 5c4604e757ba ("drm/i915: Prevent a race during I915_GEM_MMAP ioctl with WC set") Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: Adam Zabrocki <adamza@microsoft.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.0+ Cc: Akash Goel <akash.goel@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190305110409.28633-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit a90e1948efb648f567444f87f3c19b2a0787affd) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The arm64 NEON bit-sliced implementation of AES-CTR fails the improved
skcipher tests because it sometimes produces the wrong ciphertext. The
bug is that the final keystream block isn't returned from the assembly
code when the number of non-final blocks is zero. This can happen if
the input data ends a few bytes after a page boundary. In this case the
last bytes get "encrypted" by XOR'ing them with uninitialized memory.
Fix the assembly code to return the final keystream block when needed.
Fixes: 88a3f582bea9 ("crypto: arm64/aes - don't use IV buffer to return final keystream block") Cc: <stable@vger.kernel.org> # v4.11+ Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the original code before 181bf1e815a2 the loop was continuing until
it finds the first matching superios[i].io and p->base.
But after 181bf1e815a2 the logic changed and the loop now returns the
pointer to the first mismatched array element which is then used in
get_superio_dma() and get_superio_irq() and thus returning the wrong
value.
Fix the condition so that it now returns the correct pointer.
Fixes: 181bf1e815a2 ("parport_pc: clean up the modified while loops using for") Cc: Alan Cox <alan@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: QiaoChong <qiaochong@loongson.cn>
[rewrite the commit message] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When an output port driver is removed, also remove references to it from
any masters. Failing to do this causes a NULL ptr dereference when
configuring another output port:
With string type property entries we need to use
sizeof(const char *) instead of the number of characters as
the length of the entry.
If the string was shorter then sizeof(const char *),
attempts to read it would have failed with -EOVERFLOW. The
problem has been hidden because all build-in string
properties have had a string longer then 8 characters until
now.
Fixes: a85f42047533 ("device property: helper macros for property entry creation") Cc: 4.5+ <stable@vger.kernel.org> # 4.5+ Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This bug has apparently existed since the introduction of this function
in the pre-git era (4500e91754d3 in Thomas Gleixner's history.git,
"[NET]: Add proc_dointvec_userhz_jiffies, use it for proper handling of
neighbour sysctls.").
As a minimal fix we can simply duplicate the corresponding check in
do_proc_dointvec_conv().
When VM_NO_GUARD is not set area->size includes adjacent guard page,
thus for correct size checking get_vm_area_size() should be used, but
not area->size.
This fixes possible kernel oops when userspace tries to mmap an area on
1 page bigger than was allocated by vmalloc_user() call: the size check
inside remap_vmalloc_range_partial() accounts non-existing guard page
also, so check successfully passes but vmalloc_to_page() returns NULL
(guard page does not physically exist).
The following code pattern example should trigger an oops:
soft_offline_in_use_page() passed refcount and page lock from tail page
to head page, which is not needed because we can pass any subpage to
split_huge_page().
Naoya had fixed a similar issue in c3901e722b29 ("mm: hwpoison: fix thp
split handling in memory_failure()"). But he missed fixing soft
offline.
The 'div' field does not represent a number of bits used to divide
(understand: right-shift) the divider, but a number itself used to
divide the divider.
Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Take a parent rate of 180 MHz, and a requested rate of 4.285715 MHz.
This results in a theorical divider of 41.999993 which is then rounded
up to 42. The .round_rate function would then return (180 MHz / 42) as
the clock, rounded down, so 4.285714 MHz.
Calling clk_set_rate on 4.285714 MHz would round the rate again, and
give a theorical divider of 42,0000028, now rounded up to 43, and the
rate returned would be (180 MHz / 43) which is 4.186046 MHz, aka. not
what we requested.
Fix this by rounding up the divisions.
Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Maarten ter Huurne <maarten@treewalker.org> Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I noticed that modprobe clk-twl6040 can fail after a cold boot with:
abe_cm:clk:0010:0: failed to enable
...
Unhandled fault: imprecise external abort (0x1406) at 0xbe896b20
WARNING: CPU: 1 PID: 29 at drivers/clk/clk.c:828 clk_core_disable_lock+0x18/0x24
...
(clk_core_disable_lock) from [<c0123534>] (_disable_clocks+0x18/0x90)
(_disable_clocks) from [<c0124040>] (_idle+0x17c/0x244)
(_idle) from [<c0125ad4>] (omap_hwmod_idle+0x24/0x44)
(omap_hwmod_idle) from [<c053a038>] (sysc_runtime_suspend+0x48/0x108)
(sysc_runtime_suspend) from [<c06084c4>] (__rpm_callback+0x144/0x1d8)
(__rpm_callback) from [<c0608578>] (rpm_callback+0x20/0x80)
(rpm_callback) from [<c0607034>] (rpm_suspend+0x120/0x694)
(rpm_suspend) from [<c0607a78>] (__pm_runtime_idle+0x60/0x84)
(__pm_runtime_idle) from [<c053aaf0>] (sysc_probe+0x874/0xf2c)
(sysc_probe) from [<c05fecd4>] (platform_drv_probe+0x48/0x98)
After searching around for a similar issue, I came across an earlier fix
that never got merged upstream in the Android tree for glass-omap-xrr02.
There is patch "MFD: twl6040-codec: Implement PDMCLK cold temp errata"
by Misael Lopez Cruz <misael.lopez@ti.com>.
Based on my observations, this fix is also needed when cold booting
devices, and not just for deeper idle modes. Since we now have a clock
driver for pdmclk, let's fix the issue in twl6040_pdmclk_prepare().
Cc: Misael Lopez Cruz <misael.lopez@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When ext2 filesystem is created with 64k block size, ext2_max_size()
will return value less than 0. Also, we cannot write any file in this fs
since the sb->maxbytes is less than 0. The core of the problem is that
the size of block index tree for such large block size is more than
i_blocks can carry. So fix the computation to count with this
possibility.
File size limits computed with the new function for the full range of
possible block sizes look like:
Within cxl module, iteration over array 'adapter->afu' may be racy
at few points as it might be simultaneously read during an EEH and its
contents being set to NULL while driver is being unloaded or unbound
from the adapter. This might result in a NULL pointer to 'struct afu'
being de-referenced during an EEH thereby causing a kernel oops.
This patch fixes this by making sure that all access to the array
'adapter->afu' is wrapped within the context of spin-lock
'adapter->afu_list_lock'.
When disabling and removing a receive context, it is possible for an
asynchronous event (i.e IRQ) to occur. Because of this, there is a race
between cleaning up the context, and the context being used by the
asynchronous event.
When computing maximum size of filesystem possible with given number of
group descriptor blocks, we forget to include s_first_data_block into
the number of blocks. Thus for filesystems with non-zero
s_first_data_block it can happen that computed maximum filesystem size
is actually lower than current filesystem size which confuses the code
and eventually leads to a BUG_ON in ext4_alloc_group_tables() hitting on
flex_gd->count == 0. The problem can be reproduced like:
Fix the problem by properly including s_first_data_block into the
computed number of filesystem blocks.
Fixes: 1c6bd7173d66 "ext4: convert file system to meta_bg if needed..." Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The reason is that while swapping two inode, we swap the flags too.
Some flags such as EXT4_JOURNAL_DATA_FL can really confuse the things
since we're not resetting the address operations structure. The
simplest way to keep things sane is to restrict the flags that can be
swapped.
pxa_cpufreq_init_voltages() is marked __init but usually inlined into
the non-__init pxa_cpufreq_init() function. When building with clang,
it can stay as a standalone function in a discarded section, and produce
this warning:
WARNING: vmlinux.o(.text+0x616a00): Section mismatch in reference from the function pxa_cpufreq_init() to the function .init.text:pxa_cpufreq_init_voltages()
The function pxa_cpufreq_init() references
the function __init pxa_cpufreq_init_voltages().
This is often because pxa_cpufreq_init lacks a __init
annotation or the annotation of pxa_cpufreq_init_voltages is wrong.
Fixes: 50e77fcd790e ("ARM: pxa: remove __init from cpufreq_driver->init()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prohibit probing on optprobe template code, since it is not
a code but a template instruction sequence. If we modify
this template, copied template must be broken.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrea Righi <righi.andrea@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 9326638cbee2 ("kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation") Link: http://lkml.kernel.org/r/154998787911.31052.15274376330136234452.stgit@devbox Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In current logic, its_parse_indirect_baser() will be invoked twice
when allocating Device tables. Add a *break* to omit the unnecessary
and annoying (might be ...) invoking.
Fixes: 32bd44dc19de ("irqchip/gic-v3-its: Fix the incorrect parsing of VCPU table size") Cc: stable@vger.kernel.org Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The memcpy()s in the PCBC implementation use walk->iv as both the source
and destination, which has undefined behavior. These memcpy()'s are
actually unneeded, because walk->iv is already used to hold the previous
plaintext block XOR'd with the previous ciphertext block. Thus,
walk->iv is already updated to its final value.
In the past we had data corruption when reading compressed extents that
are shared within the same file and they are consecutive, this got fixed
by commit 005efedf2c7d0 ("Btrfs: fix read corruption of compressed and
shared extents") and by commit 808f80b46790f ("Btrfs: update fix for read
corruption of compressed and shared extents"). However there was a case
that was missing in those fixes, which is when the shared and compressed
extents are referenced with a non-zero offset. The following shell script
creates a reproducer for this issue:
#!/bin/bash
mkfs.btrfs -f /dev/sdc &> /dev/null
mount -o compress /dev/sdc /mnt/sdc
# Create a file with 3 consecutive compressed extents, each has an
# uncompressed size of 128Kb and a compressed size of 4Kb.
for ((i = 1; i <= 3; i++)); do
head -c 4096 /dev/zero
for ((j = 1; j <= 31; j++)); do
head -c 4096 /dev/zero | tr '\0' "\377"
done
done > /mnt/sdc/foobar
sync
echo "Digest after file creation: $(md5sum /mnt/sdc/foobar)"
# Clone the first extent into offsets 128K and 256K.
xfs_io -c "reflink /mnt/sdc/foobar 0 128K 128K" /mnt/sdc/foobar
xfs_io -c "reflink /mnt/sdc/foobar 0 256K 128K" /mnt/sdc/foobar
sync
echo "Digest after cloning: $(md5sum /mnt/sdc/foobar)"
# Punch holes into the regions that are already full of zeroes.
xfs_io -c "fpunch 0 4K" /mnt/sdc/foobar
xfs_io -c "fpunch 128K 4K" /mnt/sdc/foobar
xfs_io -c "fpunch 256K 4K" /mnt/sdc/foobar
sync
echo "Digest after hole punching: $(md5sum /mnt/sdc/foobar)"
When running the script we get the following output:
Digest after file creation: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar
linked 131072/131072 bytes at offset 131072
128 KiB, 1 ops; 0.0033 sec (36.960 MiB/sec and 295.6830 ops/sec)
linked 131072/131072 bytes at offset 262144
128 KiB, 1 ops; 0.0015 sec (78.567 MiB/sec and 628.5355 ops/sec)
Digest after cloning: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar
Digest after hole punching: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar
Dropping page cache...
Digest after hole punching: fba694ae8664ed0c2e9ff8937e7f1484 /mnt/sdc/foobar
This happens because after reading all the pages of the extent in the
range from 128K to 256K for example, we read the hole at offset 256K
and then when reading the page at offset 260K we don't submit the
existing bio, which is responsible for filling all the page in the
range 128K to 256K only, therefore adding the pages from range 260K
to 384K to the existing bio and submitting it after iterating over the
entire range. Once the bio completes, the uncompressed data fills only
the pages in the range 128K to 256K because there's no more data read
from disk, leaving the pages in the range 260K to 384K unfilled. It is
just a slightly different variant of what was solved by commit 005efedf2c7d0 ("Btrfs: fix read corruption of compressed and shared
extents").
Fix this by forcing a bio submit, during readpages(), whenever we find a
compressed extent map for a page that is different from the extent map
for the previous page or has a different starting offset (in case it's
the same compressed extent), instead of the extent map's original start
offset.
A test case for fstests follows soon.
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Fixes: 808f80b46790f ("Btrfs: update fix for read corruption of compressed and shared extents") Fixes: 005efedf2c7d0 ("Btrfs: fix read corruption of compressed and shared extents") Cc: stable@vger.kernel.org # 4.3+ Tested-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We recently had a customer issue with a corrupted filesystem. When
trying to mount this image btrfs panicked with a division by zero in
calc_stripe_length().
The corrupt chunk had a 'num_stripes' value of 1. calc_stripe_length()
takes this value and divides it by the number of copies the RAID profile
is expected to have to calculate the amount of data stripes. As a DUP
profile is expected to have 2 copies this division resulted in 1/2 = 0.
Later then the 'data_stripes' variable is used as a divisor in the
stripe length calculation which results in a division by 0 and thus a
kernel panic.
When encountering a filesystem with a DUP block group and a
'num_stripes' value unequal to 2, refuse mounting as the image is
corrupted and will lead to unexpected behaviour.
Code inspection showed a RAID1 block group has the same issues.
Fixes: e06cd3dd7cea ("Btrfs: add validadtion checks for chunk loading") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are holding a transaction handle when setting an acl, therefore we can
not allocate the xattr value buffer using GFP_KERNEL, as we could deadlock
if reclaim is triggered by the allocation, therefore setup a nofs context.
Fixes: 39a27ec1004e8 ("btrfs: use GFP_KERNEL for xattr and acl allocations") CC: stable@vger.kernel.org # 4.9+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a build failure when using GCC 8.1:
/usr/bin/ld: block/partitions/ldm.o: in function `ldm_parse_tocblock':
block/partitions/ldm.c:153: undefined reference to `strcmp'
This is caused by a new optimization which effectively replaces a
strncmp() call with a strcmp() call. This affects a number of strncmp()
call sites in the kernel.
The entire class of optimizations is avoided with -fno-builtin, which
gets enabled by -ffreestanding. This may avoid possible future build
failures in case new optimizations appear in future compilers.
I haven't done any performance measurements with this patch but I did
count the function calls in a defconfig build. For example, there are now
23 more sprintf() calls and 39 fewer strcpy() calls. The effect on the
other libc functions is smaller.
If this harms performance we can tackle that regression by optimizing
the call sites, ideally using semantic patches. That way, clang and ICC
builds might benfit too.
Before this patch, it was possible for two pipes to affect each other after
data had been transferred between them with tee():
============
$ cat tee_test.c
int main(void) {
int pipe_a[2];
if (pipe(pipe_a)) err(1, "pipe");
int pipe_b[2];
if (pipe(pipe_b)) err(1, "pipe");
if (write(pipe_a[1], "abcd", 4) != 4) err(1, "write");
if (tee(pipe_a[0], pipe_b[1], 2, 0) != 2) err(1, "tee");
if (write(pipe_b[1], "xx", 2) != 2) err(1, "write");
As suggested by Al Viro, fix it by creating a separate type for
non-mergeable pipe buffers, then changing the types of buffers in
splice_pipe_to_pipe() and link_pipe().
Cc: <stable@vger.kernel.org> Fixes: 7c77f0b3f920 ("splice: implement pipe to pipe splicing") Fixes: 70524490ee2e ("[PATCH] splice: add support for sys_tee()") Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
d_delete only unhashes an entry if it is reached with
dentry->d_lockref.count != 1. Prior to commit 8ead9dd54716 ("devpts:
more pty driver interface cleanups"), d_delete was called on a dentry
from devpts_pty_kill with two references held, which would trigger the
unhashing, and the subsequent dputs would release it.
Commit 8ead9dd54716 reworked devpts_pty_kill to stop acquiring the second
reference from d_find_alias, and the d_delete call left the dentries
still on the hashed list without actually ever being dropped from dcache
before explicit cleanup. This causes the number of negative dentries for
devpts to pile up, and an `ls /dev/pts` invocation can take seconds to
return.
Provide always_delete_dentry() from simple_dentry_operations
as .d_delete for devpts, to make the dentry be dropped from dcache.
Without this cleanup, the number of dentries in /dev/pts/ can be grown
arbitrarily as:
When using SCSI passthrough in combination with the iSCSI target driver
then cmd->t_state_lock may be obtained from interrupt context. Hence, all
code that obtains cmd->t_state_lock from thread context must disable
interrupts first. This patch avoids that lockdep reports the following:
WARNING: inconsistent lock state
4.18.0-dbg+ #1 Not tainted
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
iscsi_ttx/1800 [HC1[1]:SC0[2]:HE0:SE0] takes: 000000006e7b0ceb (&(&cmd->t_state_lock)->rlock){?...}, at: target_complete_cmd+0x47/0x2c0 [target_core_mod]
{HARDIRQ-ON-W} state was registered at:
lock_acquire+0xd2/0x260
_raw_spin_lock+0x32/0x50
iscsit_close_connection+0x97e/0x1020 [iscsi_target_mod]
iscsit_take_action_for_connection_exit+0x108/0x200 [iscsi_target_mod]
iscsi_target_rx_thread+0x180/0x190 [iscsi_target_mod]
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
irq event stamp: 1281
hardirqs last enabled at (1279): [<ffffffff970ade79>] __local_bh_enable_ip+0xa9/0x160
hardirqs last disabled at (1281): [<ffffffff97a008a5>] interrupt_entry+0xb5/0xd0
softirqs last enabled at (1278): [<ffffffff977cd9a1>] lock_sock_nested+0x51/0xc0
softirqs last disabled at (1280): [<ffffffffc07a6e04>] ip6_finish_output2+0x124/0xe40 [ipv6]
other info that might help us debug this:
Possible unsafe locking scenario:
It was reported that some devices report an OPTIMAL TRANSFER LENGTH of
0xFFFF blocks. That looks bogus, especially for a device with a
4096-byte physical block size.
Ignore OPTIMAL TRANSFER LENGTH if it is not a multiple of the device's
reported physical block size.
To make the sanity checking conditionals more readable--and to
facilitate printing warnings--relocate the checking to a helper
function. No functional change aside from the printks.
Cc: <stable@vger.kernel.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199759 Reported-by: Christoph Anton Mitterer <calestyo@scientia.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix performance issue where the queue depth for SmartIOC logical volumes is
set to 1, and allow the usual logical volume code to be executed
Fixes: a052865fe287 (aacraid: Set correct Queue Depth for HBA1000 RAW disks) Cc: stable@vger.kernel.org Signed-off-by: Sagar Biradar <Sagar.Biradar@microchip.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The virtio scsi spec defines struct virtio_scsi_ctrl_tmf as a set of
device-readable records and a single device-writable response entry:
struct virtio_scsi_ctrl_tmf
{
// Device-readable part
le32 type;
le32 subtype;
u8 lun[8];
le64 id;
// Device-writable part
u8 response;
}
The above should be organised as two descriptor entries (or potentially
more if using VIRTIO_F_ANY_LAYOUT), but without any extra data after "le64
id" or after "u8 response".
The Linux driver doesn't respect that, with virtscsi_abort() and
virtscsi_device_reset() setting cmd->sc before calling virtscsi_tmf(). It
results in the original scsi command payload (or writable buffers) added to
the tmf.
This fixes the problem by leaving cmd->sc zeroed out, which makes
virtscsi_kick_cmd() add the tmf to the control vq without any payload.
Cc: stable@vger.kernel.org Signed-off-by: Felipe Franciosi <felipe@nutanix.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A queue with a capacity of zero is clearly not a valid virtio queue.
Some emulators report zero queue size if queried with an invalid queue
index. Instead of crashing in this case let us just return -ENOENT. To
make that work properly, let us fix the notifier cleanup logic as well.
Cc: stable@vger.kernel.org Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The setup_lowcore() function creates a new prefix page for the boot CPU.
The PSW mask for the system_call, external interrupt, i/o interrupt and
the program check handler have the DAT bit set in this new prefix page.
At the time setup_lowcore is called the system still runs without virtual
address translation, the paging_init() function creates the kernel page
table and loads the CR13 with the kernel ASCE.
Any code between setup_lowcore() and the end of paging_init() that has
a BUG or WARN statement will create a program check that can not be
handled correctly as there is no kernel page table yet.
To allow early WARN statements initially setup the lowcore with DAT off
and set the DAT bit only after paging_init() has completed.
Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When shutting down the timer, ensure that after we have stopped the
timer any pending interrupts are cleared. This fixes a problem when
suspending, as interrupts are disabled before the timer is stopped,
so the timer interrupt may still be asserted, preventing the system
entering a low power state when the wfi is executed.
Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: <stable@vger.kernel.org> # v4.3+ Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a timer tick occurs and the clock is in one-shot mode, the timer
needs to be stopped to prevent it triggering subsequent interrupts.
Currently this code is in exynos4_mct_tick_clear(), but as it is
only needed when an ISR occurs move it into exynos4_mct_tick_isr(),
leaving exynos4_mct_tick_clear() just doing what its name suggests it
should.
Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: stable@vger.kernel.org # v4.3+ Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The step values for some of the LDOs appears to be incorrect, resulting
in incorrect voltages (or at least, ones which are different from the
Samsung 3.4 vendor kernel).
Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If regulator DT node doesn't exist, its of_parse_cb callback
function isn't called. Then all values for DT properties are
filled with zero. This leads to wrong register update for
FPS and POK settings.
Signed-off-by: Jinyoung Park <jinyoungp@nvidia.com> Signed-off-by: Mark Zhang <markz@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LDO35 uses 25 mV step, not 50 mV. Bucks 7 and 8 use 12.5 mV step
instead of 6.25 mV. Wrong step caused over-voltage (LDO35) or
under-voltage (buck7 and 8) if regulators were used (e.g. on Exynos5420
Arndale Octa board).
Cc: <stable@vger.kernel.org> Fixes: cb74685ecb39 ("regulator: s2mps11: Add samsung s2mps11 regulator driver") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
("spi: pxa2xx: Switch to SPI core DMA mapping functionality")
switches to SPI core provided DMA helpers, it missed to setup maximum
supported DMA transfer length for the controller and thus users
mistakenly try to send more data than supported with the following
warning:
ili9341 spi-PRP0001:01: DMA disabled for transfer length 153600 greater than 65536
Setup maximum supported DMA transfer length in order to make users know
the limit.
Fixes: b6ced294fb61 ("spi: pxa2xx: Switch to SPI core DMA mapping functionality") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 4dea6c9b0b64 ("spi: spi-ti-qspi: add mmap mode read support") has
has got order of parameter wrong when calling regmap_update_bits() to
select CS for mmap access. Mask and value arguments are interchanged.
Code will work on a system with single slave, but fails when more than
one CS is in use. Fix this by correcting the order of parameters when
calling regmap_update_bits().
Fixes: 4dea6c9b0b64 ("spi: spi-ti-qspi: add mmap mode read support") Cc: stable@vger.kernel.org Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now tuning reset will be done when the timing is MMC_TIMING_LEGACY/
MMC_TIMING_MMC_HS/MMC_TIMING_SD_HS. But for timing MMC_TIMING_MMC_HS,
we can not do tuning reset, otherwise HS400 timing is not right.
Here is the process of init HS400, first finish tuning in HS200 mode,
then switch to HS mode and 8 bit DDR mode, finally switch to HS400
mode. If we do tuning reset in HS mode, this will cause HS400 mode
lost the tuning setting, which will cause CRC error.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Cc: stable@vger.kernel.org # v4.12+ Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: d9370424c948 ("mmc: sdhci-esdhc-imx: reset tuning circuit when power on mmc card") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / linux-stable / log