Fix die_walk_lines() to list the function entry line correctly. Since
the dwarf_entrypc() does not return the entry pc if the DIE has only
range attribute, __die_walk_funclines() fails to list the declaration
line (entry line) in that case.
To solve this issue, this introduces die_entrypc() which correctly
returns the entry PC (the first address range) even if the DIE has only
range attribute. With this fix die_walk_lines() shows the function entry
line is able to probe correctly.
Fixes: 4cc9cec636e7 ("perf probe: Introduce lines walker interface") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/157190837419.1859.4619125803596816752.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Thomas Backlund <tmb@mageia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
where we can deadlock during device shutdown. The problem occurs if
the recv_work's nbd_config_put occurs after nbd_start_device_ioctl has
returned and the userspace app has droppped its reference via closing
the device and running nbd_release. The recv_work nbd_config_put call
would then drop the refcount to zero and try to destroy the config which
would try to do destroy_workqueue from the recv work.
This patch just has nbd_start_device_ioctl do a flush_workqueue when it
wakes so we know after the ioctl returns running works have exited. This
also fixes a possible race where we could try to reuse the device while
old recv_works are still running.
Cc: stable@vger.kernel.org Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs") Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Two previous patches introduced below quirks for P2020 platforms.
- SDHCI_QUIRK_RESET_AFTER_REQUEST
- SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
The patches made a mistake to add them in quirks2 of sdhci_host
structure, while they were defined for quirks.
host->quirks2 |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
host->quirks2 |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
This patch is to fix them.
host->quirks |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
Tuning support in DDR50 speed mode was added in SD Specifications Part1
Physical Layer Specification v3.01. Its not possible to distinguish
between v3.00 and v3.01 from the SCR and that is why since
commit 4324f6de6d2e ("mmc: core: enable CMD19 tuning for DDR50 mode")
tuning failures are ignored in DDR50 speed mode.
Cards compatible with v3.00 don't respond to CMD19 in DDR50 and this
error gets printed during enumeration and also if retune is triggered at
any time during operation. Update the printk level to pr_debug so that
these errors don't lead to false error reports.
First, the fix seems to be plain wrong, since the erratum suggests
waiting 5ms before setting setting SYSCTL[RSTD], but this msleep()
happens after the call of sdhci_reset() which is where that bit gets
set (if SDHCI_RESET_DATA is in mask).
Second, walking the whole device tree to figure out if some node has a
"fsl,p2020-esdhc" compatible string is hugely expensive - about 70 to
100 us on our mpc8309 board. Walking the device tree is done under a
raw_spin_lock, so this is obviously really bad on an -rt system, and a
waste of time on all.
In fact, since esdhc_reset() seems to get called around 100 times per
second, that mpc8309 now spends 0.8% of its time determining that
it is not a p2020. Whether those 100 calls/s are normal or due to some
other bug or misconfiguration, regularly hitting a 100 us
non-preemptible window is unacceptable.
Before commit 0366a1c70b89 ("powerpc/irq: Run softirqs off the top of
the irq stack"), check_stack_overflow() was called by do_IRQ(), before
switching to the irq stack.
In that commit, do_IRQ() was renamed __do_irq(), and is now executing
on the irq stack, so check_stack_overflow() has just become almost
useless.
Move check_stack_overflow() call in do_IRQ() to do the check while
still on the current stack.
Each logical CPU in Scalable MCA systems controls a unique set of MCA
banks in the system. These banks are not shared between CPUs. The bank
types and ordering will be the same across CPUs on currently available
systems.
However, some CPUs may see a bank as Reserved/Read-as-Zero (RAZ) while
other CPUs do not. In this case, the bank seen as Reserved on one CPU is
assumed to be the same type as the bank seen as a known type on another
CPU.
In general, this occurs when the hardware represented by the MCA bank
is disabled, e.g. disabled memory controllers on certain models, etc.
The MCA bank is disabled in the hardware, so there is no possibility of
getting an MCA/MCE from it even if it is assumed to have a known type.
For example:
Full system:
Bank | Type seen on CPU0 | Type seen on CPU1
------------------------------------------------
0 | LS | LS
1 | UMC | UMC
2 | CS | CS
System with hardware disabled:
Bank | Type seen on CPU0 | Type seen on CPU1
------------------------------------------------
0 | LS | LS
1 | UMC | RAZ
2 | CS | CS
For this reason, there is a single, global struct smca_banks[] that is
initialized at boot time. This array is initialized on each CPU as it
comes online. However, the array will not be updated if an entry already
exists.
This works as expected when the first CPU (usually CPU0) has all
possible MCA banks enabled. But if the first CPU has a subset, then it
will save a "Reserved" type in smca_banks[]. Successive CPUs will then
not be able to update smca_banks[] even if they encounter a known bank
type.
This may result in unexpected behavior. Depending on the system
configuration, a user may observe issues enumerating the MCA
thresholding sysfs interface. The issues may be as trivial as sysfs
entries not being available, or as severe as system hangs.
For example:
Bank | Type seen on CPU0 | Type seen on CPU1
------------------------------------------------
0 | LS | LS
1 | RAZ | UMC
2 | CS | CS
Extend the smca_banks[] entry check to return if the entry is a
non-reserved type. Otherwise, continue so that CPUs that encounter a
known bank type can update smca_banks[].
... because interrupts are disabled that early and sending IPIs can
deadlock:
BUG: sleeping function called from invalid context at kernel/sched/completion.c:99
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
no locks held by swapper/1/0.
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<ffffffff8106dda9>] copy_process+0x8b9/0x1ca0
softirqs last enabled at (0): [<ffffffff8106dda9>] copy_process+0x8b9/0x1ca0
softirqs last disabled at (0): [<0000000000000000>] 0x0
Preemption disabled at:
[<ffffffff8104703b>] start_secondary+0x3b/0x190
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.5.0-rc2+ #1
Hardware name: GIGABYTE MZ01-CE1-00/MZ01-CE1-00, BIOS F02 08/29/2018
Call Trace:
dump_stack
___might_sleep.cold.92
wait_for_completion
? generic_exec_single
rdmsr_safe_on_cpu
? wrmsr_on_cpus
mce_amd_feature_init
mcheck_cpu_init
identify_cpu
identify_secondary_cpu
smp_store_cpu_info
start_secondary
secondary_startup_64
The function smca_configure() is called only on the current CPU anyway,
therefore replace rdmsr_safe_on_cpu() with atomic rdmsr_safe() and avoid
the IPI.
Commit 4b927b94d5df ("KVM: arm/arm64: vgic: Introduce find_reg_by_id()")
introduced 'find_reg_by_id()', which looks up a system register only if
the 'id' index parameter identifies a valid system register. As part of
the patch, existing callers of 'find_reg()' were ported over to the new
interface, but this breaks 'index_to_sys_reg_desc()' in the case that the
initial lookup in the vCPU target table fails because we will then call
into 'find_reg()' for the system register table with an uninitialised
'param' as the key to the lookup.
GCC 10 is bright enough to spot this (amongst a tonne of false positives,
but hey!):
| arch/arm64/kvm/sys_regs.c: In function ‘index_to_sys_reg_desc.part.0.isra’:
| arch/arm64/kvm/sys_regs.c:983:33: warning: ‘params.Op2’ may be used uninitialized in this function [-Wmaybe-uninitialized]
| 983 | (u32)(x)->CRn, (u32)(x)->CRm, (u32)(x)->Op2);
| [...]
Revert the hunk of 4b927b94d5df which breaks 'index_to_sys_reg_desc()' so
that the old behaviour of checking the index upfront is restored.
ext4_check_dir_entry() currently does not catch a case when a directory
entry ends so close to the block end that the header of the next
directory entry would not fit in the remaining space. This can lead to
directory iteration code trying to access address beyond end of current
buffer head leading to oops.
CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191202170213.4761-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function ext4_empty_dir() doesn't correctly handle directories with
holes and crashes on bh->b_data dereference when bh is NULL. Reorganize
the loop to use 'offset' variable all the times instead of comparing
pointers to current direntry with bh->b_data pointer. Also add more
strict checking of '.' and '..' directory entries to avoid entering loop
in possibly invalid state on corrupted filesystems.
The "auto-attach" handler function `gsc_hpdi_auto_attach()` calls
`dma_alloc_coherent()` in a loop to allocate some DMA data buffers, and
also calls it to allocate a buffer for a DMA descriptor chain. However,
it does not check the return value of any of these calls. Change
`gsc_hpdi_auto_attach()` to return `-ENOMEM` if any of these
`dma_alloc_coherent()` calls fail. This will result in the comedi core
calling the "detach" handler `gsc_hpdi_detach()` as part of the
clean-up, which will call `gsc_hpdi_free_dma()` to free any allocated
DMA coherent memory buffers.
At least on the HP Envy x360 15-cp0xxx model the WMI interface
for HPWMI_FEATURE2_QUERY requires an outsize of at least 128 bytes,
otherwise it fails with an error code 5 (HPWMI_RET_INVALID_PARAMETERS):
Dec 06 00:59:38 kernel: hp_wmi: query 0xd returned error 0x5
We do not care about the contents of the buffer, we just want to know
if the HPWMI_FEATURE2_QUERY command is supported.
This commits bumps the buffer size, fixing the error.
Fixes: 8a1513b4932 ("hp-wmi: limit hotkey enable") Cc: stable@vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When disconnecting a USB hub that has some child device(s) connected to it
(such as a USB mouse), then the stack tries to clear halt and
reset device(s) which are _already_ physically disconnected.
The issue has been reproduced with:
CPU: IMX6D5EYM10AD or MCIMX6D5EYM10AE.
SW: U-Boot 2019.07 and kernel 4.19.40.
CPU: HP Proliant Microserver Gen8.
SW: Linux version 4.2.3-300.fc23.x86_64
In this situation there will be error bit for MMF active yet the
CERR equals EHCI_TUNE_CERR + halt. Existing implementation
interprets this as a stall [1] (chapter 8.4.5).
The possible conditions when the MMF will be active + halt
can be found from [2] (Table 4-13).
Fix for the issue is to check whether MMF is active and PID Code is
IN before checking for the stall. If these conditions are true then
it is not a stall.
What happens after the fix is that when disconnecting a hub with
attached device(s) the situation is not interpret as a stall.
If a transaction error happens in vhci_recv_ret_submit(), event
handler closes connection and changes port status to kick hub_event.
Then hub tries to flush the endpoint URBs, but that causes infinite
loop between usb_hub_flush_endpoint() and vhci_urb_dequeue() because
"vhci_priv" in vhci_urb_dequeue() was already released by
vhci_recv_ret_submit() before a transmission error occurred. Thus,
vhci_urb_dequeue() terminates early and usb_hub_flush_endpoint()
continuously calls vhci_urb_dequeue().
The root cause of this issue is that vhci_recv_ret_submit()
terminates early without giving back URB when transaction error
occurs in vhci_recv_ret_submit(). That causes the error URB to still
be linked at endpoint list without “vhci_priv".
So, in the case of transaction error in vhci_recv_ret_submit(),
unlink URB from the endpoint, insert proper error code in
urb->status and give back URB.
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Suwan Kim <suwan.kim027@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20191213023055.19933-3-suwan.kim027@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When vhci uses SG and receives data whose size is smaller than SG
buffer size, it tries to receive more data even if it acutally
receives all the data from the server. If then, it erroneously adds
error event and triggers connection shutdown.
vhci-hcd should check if it received all the data even if there are
more SG entries left. So, check if it receivces all the data from
the server in for_each_sg() loop.
Fixes: ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Suwan Kim <suwan.kim027@gmail.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191213023055.19933-2-suwan.kim027@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Callers of alloc_test_extent_buffer have not correctly interpreted the
return value as error pointer, as alloc_test_extent_buffer should behave
as alloc_extent_buffer. The self-tests were unaffected but
btrfs_find_create_tree_block could call both functions and that would
cause problems up in the call chain.
Fixes: faa2dbf004e8 ("Btrfs: add sanity tests for new qgroup accounting code") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The stack overflow happens because get_tod_clock_monotonic() gets called
by ftrace but itself calls preempt_{disable,enable}(), which leads to a
endless recursion. Fix this by using preempt_{disable,enable}_notrace().
there is a chance that always get response CRC error after HS200 tuning,
the reason is that need set CMD_TA to 2. this modification is only for
MT8173.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Cc: stable@vger.kernel.org Fixes: 1ede5cb88a29 ("mmc: mediatek: Use data tune for CMD line tune") Link: https://lore.kernel.org/r/20191204071958.18553-1-chaotian.jing@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit aims to treat SD High speed and SDR25 as the same while
setting UHS Timings in HOST_CONTROL2 which leads to failures with some
SD cards in AM65x. Revert this commit.
The issue this commit was trying to fix can be implemented in a platform
specific callback instead of common sdhci code.
Cc: <stable@vger.kernel.org> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20191128110422.25917-1-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, scrub_missing_raid56_worker() puts and potentially frees
sblock (which embeds the work item) and then submits a bio through
scrub_wr_submit(). This is another potential instance of the bug in
"btrfs: don't prematurely free work in run_ordered_work()". Fix it by
dropping the reference after we submit the bio.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, reada_start_machine_worker() frees the reada_machine_work and
then calls __reada_start_machine() to do readahead. This is another
potential instance of the bug in "btrfs: don't prematurely free work in
run_ordered_work()".
There _might_ already be a deadlock here: reada_start_machine_worker()
can depend on itself through stacked filesystems (__read_start_machine()
-> reada_start_machine_dev() -> reada_tree_block_flagged() ->
read_extent_buffer_pages() -> submit_one_bio() ->
btree_submit_bio_hook() -> btrfs_map_bio() -> submit_stripe_bio() ->
submit_bio() onto a loop device can trigger readahead on the lower
filesystem).
Either way, let's fix it by freeing the work at the end.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a phydev is created, the speed and duplex are set to zero and
-1 respectively, rather than using the predefined SPEED_UNKNOWN and
DUPLEX_UNKNOWN constants.
There is a window at initialisation time where we may report link
down using the 0/-1 values. Tidy this up and use the predefined
constants, so debug doesn't complain with:
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
With CONFIG_MIPS_VA_BITS_48=y the build fails miserably:
CC arch/mips/kernel/asm-offsets.s
In file included from arch/mips/include/asm/pgtable.h:644,
from include/linux/mm.h:99,
from arch/mips/kernel/asm-offsets.c:15:
include/asm-generic/pgtable.h:16:2: error: #error CONFIG_PGTABLE_LEVELS is not consistent with __PAGETABLE_{P4D,PUD,PMD}_FOLDED
#error CONFIG_PGTABLE_LEVELS is not consistent with __PAGETABLE_{P4D,PUD,PMD}_FOLDED
^~~~~
include/asm-generic/pgtable.h:390:28: error: unknown type name 'p4d_t'; did you mean 'pmd_t'?
static inline int p4d_same(p4d_t p4d_a, p4d_t p4d_b)
^~~~~
pmd_t
This happens because when CONFIG_MIPS_VA_BITS_48 enables 4th level of the
page tables, but neither pgtable-nop4d.h nor 5level-fixup.h are included to
cope with the 5th level.
Replace #ifdef conditions around includes of the pgtable-nop{m,u}d.h with
explicit CONFIG_PGTABLE_LEVELS and add include of 5level-fixup.h for the
case when CONFIG_PGTABLE_LEVELS==4
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: Mike Rapoport <rppt@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the vmx crypto Makefile we assign to a variable called TARGET and
pass that to the aesp8-ppc.pl and ghashp8-ppc.pl scripts.
The variable is meant to describe what flavour of powerpc we're
building for, eg. either 32 or 64-bit, and big or little endian.
Unfortunately TARGET is a fairly common name for a make variable, and
if it happens that TARGET is specified as a command line parameter to
make, the value specified on the command line will override our value.
In particular this can happen if the kernel Makefile is driven by an
external Makefile that uses TARGET for something.
This leads to weird build failures, eg:
nonsense at /build/linux/drivers/crypto/vmx/ghashp8-ppc.pl line 45.
/linux/drivers/crypto/vmx/Makefile:20: recipe for target 'drivers/crypto/vmx/ghashp8-ppc.S' failed
Which shows that we passed an empty value for $(TARGET) to the perl
script, confirmed with make V=1:
We can avoid this confusion by using override, to tell make that we
don't want anything to override our variable, even a value specified
on the command line. We can also use a less common name, given the
script calls it "flavour", let's use that.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing")
let STAs send QoS Null frames as PS triggers if the AP was
a QoS STA. However, the mac80211 PS stack relies on an
interface flag IEEE80211_STA_NULLFUNC_ACKED for
determining trigger frame ACK, which was not being set for
acked non-QoS Null frames. The effect is an inability to
trigger hardware sleep via IEEE80211_CONF_PS since the QoS
Null frame was seemingly never acked.
This bug only applies to drivers which set both
IEEE80211_HW_REPORTS_TX_ACK_STATUS and
IEEE80211_HW_PS_NULLFUNC_STACK.
Detect the acked QoS Null frame to restore STA power save.
Fixes: 7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing") Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20191119053538.25979-4-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If you try to compile this driver on a 64-bit platform then you
will get warnings because it mixes size_t with unsigned int which
only works on 32-bit.
This patch fixes all of the warnings on sun4i-ss-hash.c. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
If you try to compile this driver on a 64-bit platform then you
will get warnings because it mixes size_t with unsigned int which
only works on 32-bit.
This patch fixes all of the warnings.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add to the opcode map the following instructions:
cldemote
tpause
umonitor
umwait
movdiri
movdir64b
enqcmd
enqcmds
encls
enclu
enclv
pconfig
wbnoinvd
For information about the instructions, refer Intel SDM May 2019
(325462-070US) and Intel Architecture Instruction Set Extensions
May 2019 (319433-037).
The instruction decoding can be tested using the perf tools'
"x86 instruction decoder - new instructions" test as folllows:
We hit the following very strange deadlock on a system with Btrfs on a
loop device backed by another Btrfs filesystem:
1. The top (loop device) filesystem queues an async_cow work item from
cow_file_range_async(). We'll call this work X.
2. Worker thread A starts work X (normal_work_helper()).
3. Worker thread A executes the ordered work for the top filesystem
(run_ordered_work()).
4. Worker thread A finishes the ordered work for work X and frees X
(work->ordered_free()).
5. Worker thread A executes another ordered work and gets blocked on I/O
to the bottom filesystem (still in run_ordered_work()).
6. Meanwhile, the bottom filesystem allocates and queues an async_cow
work item which happens to be the recently-freed X.
7. The workqueue code sees that X is already being executed by worker
thread A, so it schedules X to be executed _after_ worker thread A
finishes (see the find_worker_executing_work() call in
process_one_work()).
Now, the top filesystem is waiting for I/O on the bottom filesystem, but
the bottom filesystem is waiting for the top filesystem to finish, so we
deadlock.
This happens because we are breaking the workqueue assumption that a
work item cannot be recycled while it still depends on other work. Fix
it by waiting to free the work item until we are done with all of the
related ordered work.
P.S.:
One might ask why the workqueue code doesn't try to detect a recycled
work item. It actually does try by checking whether the work item has
the same work function (find_worker_executing_work()), but in our case
the function is the same. This is the only key that the workqueue code
has available to compare, short of adding an additional, layer-violating
"custom key". Considering that we're the only ones that have ever hit
this, we should just play by the rules.
Unfortunately, we haven't been able to create a minimal reproducer other
than our full container setup using a compress-force=zstd filesystem on
top of another compress-force=zstd filesystem.
Suggested-by: Tejun Heo <tj@kernel.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, end_workqueue_fn() frees the end_io_wq entry (which embeds
the work item) and then calls bio_endio(). This is another potential
instance of the bug in "btrfs: don't prematurely free work in
run_ordered_work()".
In particular, the endio call may depend on other work items. For
example, btrfs_end_dio_bio() can call btrfs_subio_endio_read() ->
__btrfs_correct_data_nocsum() -> dio_read_error() ->
submit_dio_repair_bio(), which submits a bio that is also completed
through a end_workqueue_fn() work item. However,
__btrfs_correct_data_nocsum() waits for the newly submitted bio to
complete, thus it depends on another work item.
This example currently usually works because we use different workqueue
helper functions for BTRFS_WQ_ENDIO_DATA and BTRFS_WQ_ENDIO_DIO_REPAIR.
However, it may deadlock with stacked filesystems and is fragile
overall. The proper fix is to free the work item at the very end of the
work function, so let's do that.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Isolated initially to renesas_sdhi_internal_dmac [1], Ulf suggested
adding MMC_CAP_ERASE to the TMIO mmc core:
On Fri, Nov 15, 2019 at 10:27:25AM +0100, Ulf Hansson wrote:
-- snip --
This test and due to the discussions with Wolfram and you in this
thread, I would actually suggest that you enable MMC_CAP_ERASE for all
tmio variants, rather than just for this particular one.
In other words, set the cap in tmio_mmc_host_probe() should be fine,
as it seems none of the tmio variants supports HW busy detection at
this point.
-- snip --
Testing on R-Car H3ULCB-KF doesn't reveal any issues (v5.4-rc7):
root@rcar-gen3:~# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
mmcblk0 179:0 0 59.2G 0 disk <--- eMMC
mmcblk0boot0 179:8 0 4M 1 disk
mmcblk0boot1 179:16 0 4M 1 disk
mmcblk1 179:24 0 30G 0 disk <--- SD card
root@rcar-gen3:~# time blkdiscard /dev/mmcblk0
real 0m8.659s
user 0m0.001s
sys 0m1.920s
root@rcar-gen3:~# time blkdiscard /dev/mmcblk1
real 0m1.176s
user 0m0.001s
sys 0m0.124s
Add a forward declaration of struct kimage to the crash.h header because
future changes will invoke a crash-specific function from the realmode
init path and the compiler will complain otherwise like this:
In file included from arch/x86/realmode/init.c:11:
./arch/x86/include/asm/crash.h:5:32: warning: ‘struct kimage’ declared inside\
parameter list will not be visible outside of this definition or declaration
5 | int crash_load_segments(struct kimage *image);
| ^~~~~~
./arch/x86/include/asm/crash.h:6:37: warning: ‘struct kimage’ declared inside\
parameter list will not be visible outside of this definition or declaration
6 | int crash_copy_backup_region(struct kimage *image);
| ^~~~~~
./arch/x86/include/asm/crash.h:7:39: warning: ‘struct kimage’ declared inside\
parameter list will not be visible outside of this definition or declaration
7 | int crash_setup_memmap_entries(struct kimage *image,
|
The cpufreq core heavily depends on the availability of the struct
device for CPUs and if they aren't available at the time cpufreq driver
is registered, we will never succeed in making cpufreq work.
Because the per-cpu variable cpu_sys_devices is set only after the CPU
device is regsitered, cpufreq will never be able to get it when
cpufreq_add_dev() is called.
This patch avoids this failure by making sure device structure of at
least CPU0 is available when the cpufreq driver is registered, else
return -EPROBE_DEFER.
Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org> Co-developed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Usually all the distro will load the parport low level driver as part
of their initialization. But we can get into a situation where all the
parallel port drivers are built as module and we unload all the modules
at a later time. Then if we just do "modprobe parport" it will only
load the parport module and will not load the low level driver which
will actually register the ports. So, check the bus if there is any
parport registered, if not, load the low level driver.
We can get into the above situation with all distro but only Suse has
setup the alias for "parport_lowlevel" and so it only works in Suse.
Users of Debian based distro will need to load the lowlevel module
manually.
Leaking kernel addresses to dmesg is not a concern in this case, because
this happens only when JIT debugging is explicitly activated, which only
root can do.
Use %px in this particular instance, and also to print an instruction
address in show_code and PCREL (e.g. brasl) arguments in print_insn.
While at present functionally equivalent to %016lx, %px is recommended
by Documentation/core-api/printk-formats.rst for such cases.
On KBL platform, the microphone is attached to external codec(rt5514)
instead of PCH. However, TDM slot between PCH and codec is 16 bits only.
In order to avoid setting wrong format, we should add a constraint to
force to use 16 bits format forever.
Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190923162940.199580-1-yuhsuan@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The codec dies when RT5677_PWR_ANLG2(MX-64h) is set to 0xACE1
while it's streaming audio over SPI. The DSP firmware turns
on PLL2 (MX-64 bit 8) when SPI streaming starts. However regmap
does not believe that register can change by itself. When
BST1 (bit 15) is turned on with regmap_update_bits(), it doesn't
read the register first before write, so PLL2 power bit is
cleared by accident.
Marking MX-64h as volatile in regmap solved the issue.
1) It calculates to wrong grain values. E.g., a physical address mask
of ~0xfff should give a grain of 0x1000. Without considering
PAGE_MASK, there is an off-by-one. Things are worse when also
filtering it with ~PAGE_MASK. This will calculate to a grain with the
upper bits set. In the example it even calculates to ~0.
2) The grain does not depend on and is unrelated to the kernel's
page-size. The page-size only matters when unmapping memory in
memory_failure(). Smaller grains are wrongly rounded up to the
page-size, on architectures with a configurable page-size (e.g. arm64)
this could round up to the even bigger page-size of the hypervisor.
Fix this with:
e->grain = ~mem_err->physical_addr_mask + 1;
The grain_bits are defined as:
grain = 1 << grain_bits;
Change also the grain_bits calculation accordingly, it is the same
formula as in edac_mc.c now and the code can be unified.
The value in ->physical_addr_mask coming from firmware is assumed to
be contiguous, but this is not sanity-checked. However, in case the
mask is non-contiguous, a conversion to grain_bits effectively
converts the grain bit mask to a power of 2 by rounding it up.
Suggested-by: James Morse <james.morse@arm.com> Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191106093239.25517-11-rrichter@marvell.com Signed-off-by: Sasha Levin <sashal@kernel.org>
In some device configurations there's no radio or radio support in the
driver. That's OK, as the driver sets itself up accordingly. However
on tear-down in these caes it's still trying to tear down radio
related context when there isn't anything there, leading to
dereferences through a null pointer and chaos follows.
How this bug survived unfixed for 11 years in the pvrusb2 driver is a
mystery to me.
[hverkuil: fix two checkpatch warnings]
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Subtracting the offset delta from four-byte alignment lead to wrapping
of the requested length where `count` is less than `off`. Generalise the
length handling to enable and optimise aligned access sizes for all
offset and size combinations. The new formula produces the following
results for given offset and count values:
We might need something like this for the cfam chardevs as well, for
example we don't currently implement any alignment restrictions /
handling in the hardware master driver.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20191108051945.7109-6-joel@jms.id.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
ath10k does not provide transmit rate info per MSDU
in tx completion, mark that as -1 so mac80211
will ignore the rates. This fixes mac80211 update Mesh
link metric with invalid transmit rate info.
Tested HW: QCA9984
Tested FW: 10.4-3.9.0.2-00035
Signed-off-by: Hou Bao Hou <houbao@codeaurora.org> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Filter out instances except for inlined_subroutine and subprogram DIE in
die_walk_instances() and die_is_func_instance().
This fixes an issue that perf probe sets some probes on calling address
instead of a target function itself.
When perf probe walks on instances of an abstruct origin (a kind of
function prototype of inlined function), die_walk_instances() can also
pass a GNU_call_site (a GNU extension for call site) to callback. Since
it is not an inlined instance of target function, we have to filter out
when searching a probe point.
Without this patch, perf probe sets probes on call site address too.This
can happen on some function which is marked "inlined", but has actual
symbol. (I'm not sure why GCC mark it "inlined"):
Skip end-of-sequence and non-statement lines while walking through lines
list.
The "end-of-sequence" line information means:
"the current address is that of the first byte after the
end of a sequence of target machine instructions."
(DWARF version 4 spec 6.2.2)
This actually means out of scope and we can not probe on it.
On the other hand, the statement lines (is_stmt) means:
"the current instruction is a recommended breakpoint location.
A recommended breakpoint location is intended to “represent”
a line, a statement and/or a semantically distinct subpart
of a statement."
(DWARF version 4 spec 6.2.2)
So, non-statement line info also should be skipped.
These can reduce unneeded probe points and also avoid an error.
E.g. without this patch:
# perf probe -a "clear_tasks_mm_cpumask:1"
Added new events:
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_2 (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_3 (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_4 (on clear_tasks_mm_cpumask:1)
You can now use it in all perf tools, such as:
perf record -e probe:clear_tasks_mm_cpumask_4 -aR sleep 1
#
This puts 5 probes on one line, but acutally it's not inlined function.
This is because there are many non statement instructions at the
function prologue.
With this patch:
# perf probe -a "clear_tasks_mm_cpumask:1"
Added new event:
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)
You can now use it in all perf tools, such as:
perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1
#
Now perf-probe skips unneeded addresses.
Committer testing:
Slightly different results, but similar:
Before:
# uname -a
Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
#
# perf probe -a "clear_tasks_mm_cpumask:1"
Added new events:
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_2 (on clear_tasks_mm_cpumask:1)
You can now use it in all perf tools, such as:
perf record -e probe:clear_tasks_mm_cpumask_2 -aR sleep 1
#
After:
# perf probe -a "clear_tasks_mm_cpumask:1"
Added new event:
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)
You can now use it in all perf tools, such as:
perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1
# perf probe -l
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@kernel/cpu.c)
#
Fixes: 4cc9cec636e7 ("perf probe: Introduce lines walker interface") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/157241936090.32002.12156347518596111660.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix to show calling lines of inlined functions (where an inline function
is called).
die_walk_lines() filtered out the lines inside inlined functions based
on the address. However this also filtered out the lines which call
those inlined functions from the target function.
To solve this issue, check the call_file and call_line attributes and do
not filter out if it matches to the line information.
Without this fix, perf probe -L doesn't show some lines correctly.
(don't see the lines after 17)
Make find_best_scope() returns innermost DIE at given address if there
is no best matched scope DIE. Since Gcc sometimes generates intuitively
strange line info which is out of inlined function address range, we
need this fixup.
Without this, sometimes perf probe failed to probe on a line inside an
inlined function:
# perf probe -D ksys_open:3
Failed to find scope of probe point.
Error: Failed to add events.
Since debuginfo__find_probes() callback function can be called with the
location which already passed, the callback function must filter out
such overlapped locations.
add_probe_trace_event() has already done it by commit 1a375ae7659a
("perf probe: Skip same probe address for a given line"), but
add_available_vars() doesn't. Thus perf probe -v shows same address
repeatedly as below:
# perf probe -V vfs_read:18
Available variables at vfs_read:18
@<vfs_read+217>
char* buf
loff_t* pos
ssize_t ret
struct file* file
@<vfs_read+217>
char* buf
loff_t* pos
ssize_t ret
struct file* file
@<vfs_read+226>
char* buf
loff_t* pos
ssize_t ret
struct file* file
With this fix, perf probe -V shows it correctly:
# perf probe -V vfs_read:18
Available variables at vfs_read:18
@<vfs_read+217>
char* buf
loff_t* pos
ssize_t ret
struct file* file
@<vfs_read+226>
char* buf
loff_t* pos
ssize_t ret
struct file* file
Fixes: cf6eb489e5c0 ("perf probe: Show accessible local variables") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/157241938927.32002.4026859017790562751.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: clang-built-linux@googlegroups.com Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20191030223448.12930-9-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The object fence is not set to NULL after its reference is dropped. As a
result, its reference may be dropped again if error occurs after that,
which may lead to a use after free bug. To avoid the issue, fence is
explicitly set to NULL after dropping its reference.
Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix 'perf probe' to probe a function which has no entry pc or low pc but
only has ranges attribute.
probe_point_search_cb() uses dwarf_entrypc() to get the probe address,
but that doesn't work for the function DIE which has only ranges
attribute. Use die_entrypc() instead.
Without this fix:
# perf probe -k ../build-x86_64/vmlinux -D clear_tasks_mm_cpumask:0
Probe point 'clear_tasks_mm_cpumask' not found.
Error: Failed to add events.
Fix to show ranges of variables (--range and --vars option) in functions
which DIE has only ranges but no entry_pc attribute.
Without this fix:
# perf probe --range -V clear_tasks_mm_cpumask
Available variables at clear_tasks_mm_cpumask
@<clear_tasks_mm_cpumask+0>
(No matched variables)
With this fix:
# perf probe --range -V clear_tasks_mm_cpumask
Available variables at clear_tasks_mm_cpumask
@<clear_tasks_mm_cpumask+0>
[VAL] int cpu @<clear_tasks_mm_cpumask+[0-35,317-317,2052-2059]>
Committer testing:
Before:
[root@quaco ~]# perf probe --range -V clear_tasks_mm_cpumask
Available variables at clear_tasks_mm_cpumask
@<clear_tasks_mm_cpumask+0>
(No matched variables)
[root@quaco ~]#
After:
[root@quaco ~]# perf probe --range -V clear_tasks_mm_cpumask
Available variables at clear_tasks_mm_cpumask
@<clear_tasks_mm_cpumask+0>
[VAL] int cpu @<clear_tasks_mm_cpumask+[0-23,23-105,105-106,106-106,1843-1850,1850-1862]>
[root@quaco ~]#
Using it:
[root@quaco ~]# perf probe clear_tasks_mm_cpumask cpu
Added new event:
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask with cpu)
You can now use it in all perf tools, such as:
perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1
[root@quaco ~]# perf probe -l
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@kernel/cpu.c with cpu)
[root@quaco ~]#
[root@quaco ~]# perf trace -e probe:*cpumask
^C[root@quaco ~]#
Fixes: 349e8d261131 ("perf probe: Add --range option to show a variable's location range") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/157199323018.8075.8179744380479673672.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix perf probe to probe an inlne function which has no entry pc
or low pc but only has ranges attribute.
This seems very rare case, but I could find a few examples, as
same as probe_point_search_cb(), use die_entrypc() to get the
entry address in probe_point_inline_cb() too.
Without this patch:
# perf probe -D __amd_put_nb_event_constraints
Failed to get entry address of __amd_put_nb_event_constraints.
Probe point '__amd_put_nb_event_constraints' not found.
Error: Failed to add events.
[root@quaco ~]# perf probe -D __amd_put_nb_event_constraints
Failed to get entry address of __amd_put_nb_event_constraints.
Probe point '__amd_put_nb_event_constraints' not found.
Error: Failed to add events.
[root@quaco ~]#
Since some inlined functions are in lexical blocks of given function, we
have to recursively walk through the DIE tree. Without this fix,
perf-probe -L can miss the inlined functions which is in a lexical block
(like if (..) { func() } case.)
However, even though, to walk the lines in a given function, we don't
need to follow the children DIE of inlined functions because those do
not have any lines in the specified function.
We need to walk though whole trees only if we walk all lines in a given
file, because an inlined function can include another inlined function
in the same file.
Fixes: b0e9cb2802d4 ("perf probe: Fix to search nested inlined functions in CU") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/157190836514.1859.15996864849678136353.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since debuginfo__find_probe_point() uses dwarf_entrypc() for finding the
entry address of the function on which a probe is, it will fail when the
function DIE has only ranges attribute.
To fix this issue, use die_entrypc() instead of dwarf_entrypc().
Without this fix, perf probe -l shows incorrect offset:
# perf probe -l
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask+18446744071579263632@work/linux/linux/kernel/cpu.c)
probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask+18446744071579263752@work/linux/linux/kernel/cpu.c)
With this:
# perf probe -l
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@work/linux/linux/kernel/cpu.c)
probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask:21@work/linux/linux/kernel/cpu.c)
Committer testing:
Before:
[root@quaco ~]# perf probe -l
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask+18446744071579765152@kernel/cpu.c)
[root@quaco ~]#
After:
[root@quaco ~]# perf probe -l
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@kernel/cpu.c)
[root@quaco ~]#
Fixes: 1d46ea2a6a40 ("perf probe: Fix listing incorrect line number with inline function") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/157199321227.8075.14655572419136993015.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix die_is_func_instance() to find range-only function instance.
In some case, a function instance can be made without any low PC or
entry PC, but only with address ranges by optimization. (e.g. cold text
partially in "text.unlikely" section) To find such function instance, we
have to check the range attribute too.
Fixes: e1ecbbc3fa83 ("perf probe: Fix to handle optimized not-inlined functions") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/157190835669.1859.8368628035930950596.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This leak was found by testing the EDIMAX EW-7612 on Raspberry Pi 3B+ with
Linux 5.4-rc5 (multi_v7_defconfig + rtlwifi + kmemleak) and noticed a
single memory leak during probe:
It is because 8192cu doesn't implement usb_cmd_send_packet(), and this
patch just frees the skb within the function to resolve memleak problem
by now. Since 8192cu doesn't turn on fwctrl_lps that needs to download
command packet for firmware via the function, applying this patch doesn't
affect driver behavior.
Reported-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The fuzzer tries to open the timer instances as much as possible, and
this may cause a system hiccup easily. We've already introduced the
cap for the max number of available instances for the h/w timers, and
we should put such a limit also to the slave timers, too.
This patch introduces the limit to the multiple opened slave timers.
The upper limit is hard-coded to 1000 for now, which should suffice
for any practical usages up to now.
The channels spfi->tx_ch and spfi->rx_ch are not set to NULL after they
are released. As a result, they will be released again, either on the
error handling branch in the same function or in the corresponding
remove function, i.e. img_spfi_remove(). This patch fixes the bug by
setting the two members to NULL.
PF driver doesn't enable tx-switching for all cos queues/clients,
which causes packets drop from PF to VF. Fix this by enabling
tx-switching on all cos queues/clients.
Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
udev has a feature of creating /dev/<node> device-nodes if it finds
a devnode:<node> modalias. This allows for auto-loading of modules that
provide the node. This requires to use a statically allocated minor
number for misc character devices.
However, rfkill uses dynamic minor numbers and prevents auto-loading
of the module. So allocate the next static misc minor number and use
it for rfkill.
v4l_s_fmt, for VFL_TYPE_TOUCH, sets unneeded members of
the v4l2_pix_format structure to default values.This was
missing in v4l_g_fmt, which would lead to failures in
v4l2-compliance tests.
HW timestamping can only be requested for a packet if the NIC is first
setup via ioctl(SIOCSHWTSTAMP). If this step was skipped, then the ixgbe
driver still allowed TX packets to request HW timestamping. In this
situation, we see 'clearing Tx Timestamp hang' noise in the log.
Fix this by checking that the NIC is configured for HW TX timestamping
before accepting a HW TX timestamping request.
Similar-to:
commit 26bd4e2db06b ("igb: protect TX timestamping from API misuse")
commit 0a6f2f05a2f5 ("igb: Fix a test with HWTSTAMP_TX_ON")
Signed-off-by: Manjunath Patil <manjunath.b.patil@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Instances may have flags set as part of its data in which case the code
should not attempt to add it again otherwise it can cause duplication:
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 35
Handle: 0x00
Operation: Complete extended advertising data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x06
Flags: 0x04
BR/EDR Not Supported
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The iio_triggered_buffer_postenable() hook should be called first to
attach the poll function. The iio_triggered_buffer_predisable() hook is
called last (as is it should).
This change moves iio_triggered_buffer_postenable() to be called first. It
adds iio_triggered_buffer_predisable() on the error paths of the postenable
hook.
For the predisable hook, some code-paths have been changed to make sure
that the iio_triggered_buffer_predisable() hook gets called in case there
is an error before it.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The definitions for bit field [19:18] of the Peripheral Function Select
Register 3 were accidentally copied from bit field [20], leading to
duplicates for the TCLK1_B function, and missing TCLK0, CAN_CLK_B, and
ET0_ETXD4 functions.
Fix this by adding the missing GPIO_FN_CAN_CLK_B and GPIO_FN_ET0_ETXD4
enum values, and correcting the functions.
Currently, if the loop device receives a WRITE_ZEROES request, it asks
the underlying filesystem to punch out the range. This behavior is
correct if unmapping is allowed. However, a NOUNMAP request means that
the caller doesn't want us to free the storage backing the range, so
punching out the range is incorrect behavior.
To satisfy a NOUNMAP | WRITE_ZEROES request, loop should ask the
underlying filesystem to FALLOC_FL_ZERO_RANGE, which is (according to
the fallocate documentation) required to ensure that the entire range is
backed by real storage, which suffices for our purposes.
Fixes: 19372e2769179dd ("loop: implement REQ_OP_WRITE_ZEROES") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
With KASAN also enabled, we may also get many use-after-free reports.
The issue is that when CONFIG_DEBUG_TEST_DRIVER_REMOVE is set, we may
attempt to detach the ata_port before it has been probed.
This is because the ata_ports are async probed, meaning that there is no
guarantee that the ata_port has probed prior to detach. When the ata_port
does probe in this scenario, we get all sorts of issues as the detach may
have already happened.
Fix by ensuring synchronisation with async_synchronize_full(). We could
alternatively use the cookie returned from the ata_port probe
async_schedule() call, but that means managing the cookie, so more
complicated.
Unlike pxd_free_tlb(), the pxd_free() functions do not check for folded
page tables. This is not an issue so far, as those functions will actually
never be called, since no code will reach them when page tables are folded.
In order to avoid future issues, and to make the s390 code more similar to
other architectures, add mm_pxd_folded() checks, similar to how it is done
in pxd_free_tlb().
This was found by testing a patch from from Anshuman Khandual, which is
currently discussed on LKML ("mm/debug: Add tests validating architecture
page table helpers").
The current implementation of get_clock_monotonic() leaves it up to
the caller to call the function with preemption disabled. The only
core kernel caller (sched_clock) however does not disable preemption.
In order to make sure that all callers of this function see monotonic
values handle disabling preemption within the function itself.
Commit f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API")
switched from extcon_register_notifier() to the resource-managed
API, i.e. devm_extcon_register_notifier().
This is problematic in this case, because the extcon notifier
is dynamically registered/unregistered whenever the PHY is powered
on/off. The resource-managed API does not unregister the notifier
until the driver is removed, so as soon as the PHY is power cycled,
attempting to register the notifier again results in:
... and USB stops working after plugging the cable out and in
another time.
The easiest way to fix this is to make a partial revert of
commit f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API")
and avoid using the resource-managed API in this case.
Fixes: f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When NET_DSA_SMSC_LAN9303=y and NET_DSA_SMSC_LAN9303_MDIO=y,
below errors can be seen:
drivers/net/dsa/lan9303_mdio.c:87:23: error: REGMAP_ENDIAN_LITTLE
undeclared here (not in a function)
.reg_format_endian = REGMAP_ENDIAN_LITTLE,
drivers/net/dsa/lan9303_mdio.c:93:3: error: const struct regmap_config
has no member named reg_read
.reg_read = lan9303_mdio_read,
It should select REGMAP in config NET_DSA_SMSC_LAN9303.
Fixes: dc7005831523 ("net: dsa: LAN9303: add MDIO managed mode support") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently when the gather buffers are copied, they are copied to a
buffer that is allocated for the host1x client that wants to execute the
command streams in the buffers. However, the gather buffers will be read
by the host1x device, which causes SMMU faults if the DMA API is backed
by an IOMMU.
Fix this by allocating the gather buffer copy for the host1x device,
which makes sure that it will be mapped into the host1x's IOVA space if
the DMA API is backed by an IOMMU.
The link detection timeouts can be observed (or link might not be detected
at all) when dp83867 PHY is configured in manual mode (speed/duplex).
CFG3[9] Robust Auto-MDIX option allows to significantly improve link detection
in case dp83867 is configured in manual mode and reduce link detection
time.
As per DM: "If link partners are configured to operational modes that are
not supported by normal Auto MDI/MDIX mode (like Auto-Neg versus Force
100Base-TX or Force 100Base-TX versus Force 100Base-TX), this Robust Auto
MDI/MDIX mode allows MDI/MDIX resolution and prevents deadlock."
Hence, enable this option by default as there are no known reasons
not to do so.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In cases like suspend-to-disk and suspend-to-ram, a large number of CPU
cores need to be shut down. At present, the CPU hotplug operation is
serialised, and the CPU cores can only be shut down one by one. In this
process, if PSCI affinity_info() does not return LEVEL_OFF quickly,
cpu_psci_cpu_kill() needs to wait for 10ms. If hundreds of CPU cores
need to be shut down, it will take a long time.
Normally, there is no need to wait 10ms in cpu_psci_cpu_kill(). So
change the wait interval from 10 ms to max 1 ms and use usleep_range()
instead of msleep() for more accurate timer.
In addition, reducing the time interval will increase the messages
output, so remove the "Retry ..." message, instead, track time and
output to the the sucessful message.
There is an issue with threaded interrupts which are marked ONESHOT
and using the fasteoi handler:
if (IS_ONESHOT())
mask_irq();
....
cond_unmask_eoi_irq()
chip->irq_eoi();
if (setaffinity_pending) {
mask_ioapic();
...
move_affinity();
unmask_ioapic();
}
So if setaffinity is pending the interrupt will be moved and then
unconditionally unmasked at the ioapic level, which is wrong in two
aspects:
1) It should be kept masked up to the point where the threaded handler
finished.
2) The physical chip state and the software masked state are inconsistent
Guard both the mask and the unmask with a check for the software masked
state. If the line is marked masked then the ioapic line is also masked, so
both mask_ioapic() and unmask_ioapic() can be skipped safely.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Fixes: 3aa551c9b4c4 ("genirq: add threaded interrupt handler support") Link: https://lkml.kernel.org/r/20191017101938.321393687@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The RTL8723BU has problems connecting to AP after each warm reboot.
Sometimes it returns no scan result, and in most cases, it fails
the authentication for unknown reason. However, it works totally
fine after cold reboot.
Compare the value of register SYS_CR and SYS_CLK_MAC_CLK_ENABLE
for cold reboot and warm reboot, the registers imply that the MAC
is already powered and thus some procedures are skipped during
driver initialization. Double checked the vendor driver, it reads
the SYS_CR and SYS_CLK_MAC_CLK_ENABLE also but doesn't skip any
during initialization based on them. This commit only tells the
RTL8723BU to do full initialization without checking MAC status.
Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
"clock" may be copied to "best_clock". Initializing best_clock
is not sufficient. The fix initializes clock as well to avoid
memory disclosures and informaiton leaks.
On modern CPUs it is quite normal that the temperature limits are
reached and the CPU is throttled. In fact, often the thermal design is
not sufficient to cool the CPU at full load and limits can quickly be
reached when a burst in load happens. This will even happen with
technologies like RAPL limitting the long term power consumption of
the package.
Also, these limits are "softer", as Srinivas explains:
"CPU temperature doesn't have to hit max(TjMax) to get these warnings.
OEMs ha[ve] an ability to program a threshold where a thermal interrupt
can be generated. In some systems the offset is 20C+ (Read only value).
In recent systems, there is another offset on top of it which can be
programmed by OS, once some agent can adjust power limits dynamically.
By default this is set to low by the firmware, which I guess the
prime motivation of Benjamin to submit the patch."
So these messages do not usually indicate a hardware issue (e.g.
insufficient cooling). Log them as warnings to avoid confusion about
their severity.
[ bp: Massage commit mesage. ]
Signed-off-by: Benjamin Berg <bberg@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Christian Kellner <ckellner@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20191009155424.249277-1-bberg@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
During the setup() stage, HCI device drivers expect the chip to
acknowledge its setup() completion via vendor specific frames.
If userspace opens() such HCI device in HCI_USER_CHANNEL [1] mode,
the vendor specific frames are never tranmitted to the driver, as
they are filtered in hci_rx_work().
Allow HCI devices which operate in HCI_USER_CHANNEL mode to receive
frames if the HCI device is is HCI_INIT state.
It looks like in hci_init4_req() the request is being
initialised from cpu-endian data but the packet is specified
to be little-endian. This causes an warning from sparse due
to __le16 to u16 conversion.
Fix this by using cpu_to_le16() on the two fields in the packet.
net/bluetooth/hci_core.c:845:27: warning: incorrect type in assignment (different base types)
net/bluetooth/hci_core.c:845:27: expected restricted __le16 [usertype] tx_len
net/bluetooth/hci_core.c:845:27: got unsigned short [usertype] le_max_tx_len
net/bluetooth/hci_core.c:846:28: warning: incorrect type in assignment (different base types)
net/bluetooth/hci_core.c:846:28: expected restricted __le16 [usertype] tx_time
net/bluetooth/hci_core.c:846:28: got unsigned short [usertype] le_max_tx_time
projects / linux-stable / log