If a signal callback releases the sw_sync fence, that will trigger a
deadlock as the timeline_fence_release recurses onto the fence->lock
(used both for signaling and the the timeline tree).
To avoid that, temporarily hold an extra reference to the signalled
fences until after we drop the lock.
(This is an alternative implementation of https://patchwork.kernel.org/patch/11664717/
which avoids some potential UAF issues with the original patch.)
v2: Remove now obsolete comment, use list_move_tail() and
list_del_init()
Reported-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Fixes: d3c6dd1fb30d ("dma-buf/sw_sync: Synchronize signal vs syncpt free") Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230818145939.39697-1-robdclark@gmail.com Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The raid_component_add() function was added to the kernel tree via patch
"[SCSI] embryonic RAID class" (2005). Remove this function since it never
has had any callers in the Linux kernel. And also raid_component_release()
is only used in raid_component_add(), so it is also removed.
Signed-off-by: Zhu Wang <wangzhu9@huawei.com> Link: https://lore.kernel.org/r/20230822015254.184270-1-wangzhu9@huawei.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Fixes: 04b5b5cb0136 ("scsi: core: Fix possible memory leak if device_add() fails") Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 41320b18a0e0 ("scsi: snic: Fix possible memory leak if device_add()
fails") fixed the memory leak caused by dev_set_name() when device_add()
failed. However, it did not consider that 'tgt' has already been released
when put_device(&tgt->dev) is called. Remove kfree(tgt) in the error path
to avoid double free of 'tgt' and move put_device(&tgt->dev) after the
removed kfree(tgt) to avoid a use-after-free.
Fixes: 41320b18a0e0 ("scsi: snic: Fix possible memory leak if device_add() fails") Signed-off-by: Zhu Wang <wangzhu9@huawei.com> Link: https://lore.kernel.org/r/20230819083941.164365-1-wangzhu9@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Negative ifindexes are illegal, but the kernel does not validate the
ifindex in the ancillary header of RTM_NEWLINK messages, resulting in
the kernel generating a warning [1] when such an ifindex is specified.
0-Day found a 34.6% regression in stress-ng's 'af-alg' test case, and
bisected it to commit b81fac906a8f ("x86/fpu: Move FPU initialization into
arch_cpu_finalize_init()"), which optimizes the FPU init order, and moves
the CR4_OSXSAVE enabling into a later place:
As the FPU is not yet initialized the CPU capability setup fails to set
X86_FEATURE_OSXSAVE. Many security module like 'camellia_aesni_avx_x86_64'
depend on this feature and therefore fail to load, causing the regression.
Cure this by setting X86_FEATURE_OSXSAVE feature right after OSXSAVE
enabling.
[ tglx: Moved it into the actual BSP FPU initialization code and added a comment ]
variable *nplanes is provided by user via system call argument. The
possible value of q_data->fmt->num_planes is 1-3, while the value
of *nplanes can be 1-8. The array access by index i can cause array
out-of-bounds.
Fix this bug by checking *nplanes against the array size.
The gcc compiler translates on some architectures the 64-bit
__builtin_clzll() function to a call to the libgcc function __clzdi2(),
which should take a 64-bit parameter on 32- and 64-bit platforms.
But in the current kernel code, the built-in __clzdi2() function is
defined to operate (wrongly) on 32-bit parameters if BITS_PER_LONG ==
32, thus the return values on 32-bit kernels are in the range from
[0..31] instead of the expected [0..63] range.
This patch fixes the in-kernel functions __clzdi2() and __ctzdi2() to
take a 64-bit parameter on 32-bit kernels as well, thus it makes the
functions identical for 32- and 64-bit kernels.
This bug went unnoticed since kernel 3.11 for over 10 years, and here
are some possible reasons for that:
a) Some architectures have assembly instructions to count the bits and
which are used instead of calling __clzdi2(), e.g. on x86 the bsr
instruction and on ppc cntlz is used. On such architectures the
wrong __clzdi2() implementation isn't used and as such the bug has
no effect and won't be noticed.
b) Some architectures link to libgcc.a, and the in-kernel weak
functions get replaced by the correct 64-bit variants from libgcc.a.
c) __builtin_clzll() and __clzdi2() doesn't seem to be used in many
places in the kernel, and most likely only in uncritical functions,
e.g. when printing hex values via seq_put_hex_ll(). The wrong return
value will still print the correct number, but just in a wrong
formatting (e.g. with too many leading zeroes).
d) 32-bit kernels aren't used that much any longer, so they are less
tested.
A trivial testcase to verify if the currently running 32-bit kernel is
affected by the bug is to look at the output of /proc/self/maps:
Here the kernel uses a correct implementation of __clzdi2():
When batadv_v_ogm_aggr_send is called for an inactive interface, the skb
is silently dropped by batadv_v_ogm_send_to_if() but never freed causing
the following memory leak:
When a client roamed back to a node before it got time to destroy the
pending local entry (i.e. within the same originator interval) the old
global one is directly removed from hash table and left as such.
But because this entry had an extra reference taken at lookup (i.e using
batadv_tt_global_hash_find) there is no way its memory will be reclaimed
at any time causing the following memory leak:
If received skb in batadv_v_elp_packet_recv or batadv_v_ogm_packet_recv
is either cloned or non linearized then its data buffer will be
reallocated by batadv_check_management_packet when skb_cow or
skb_linearize get called. Thus geting ethernet header address inside
skb data buffer before batadv_check_management_packet had any chance to
reallocate it could lead to the following kernel panic:
If an interface changes the MTU, it is expected that an NETDEV_PRECHANGEMTU
and NETDEV_CHANGEMTU notification events is triggered. This worked fine for
.ndo_change_mtu based changes because core networking code took care of it.
But for auto-adjustments after hard-interfaces changes, these events were
simply missing.
Due to this problem, non-batman-adv components weren't aware of MTU changes
and thus couldn't perform their own tasks correctly.
When building for power4, newer binutils don't recognise the "dcbfl"
extended mnemonic.
dcbfl RA, RB is equivalent to dcbf RA, RB, 1.
Switch to "dcbf" to avoid the build error.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ipvs module parse the user buffer and save it to sysctl,
then check if the value is valid. invalid value occurs
over a period of time.
Here, I add a variable, struct ctl_table tmp, used to read
the value from the user buffer, and save only when it is valid.
I delete proc_do_sync_mode and use extra1/2 in table for the
proc_dointvec_minmax call.
Fixes: f73181c8288f ("ipvs: add support for sync threads") Signed-off-by: Junwei Hu <hujunwei4@huawei.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[Julian: Backport by changing SYSCTL_ZERO/SYSCTL_ONE to zero/one] Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__tracing_open() { // 1. File 'trace' is being opened;
...
*iter->trace = *tr->current_trace; // 2. Tracer 'function_graph' is
// currently set;
...
iter->trace->open(iter); // 3. Call graph_trace_open() here,
// and memory are allocated in it;
...
}
s_start() { // 4. The opened file is being read;
...
*iter->trace = *tr->current_trace; // 5. If tracer is switched to
// 'nop' or others, then memory
// in step 3 are leaked!!!
...
}
To fix it, in s_start(), close tracer before switching then reopen the
new tracer after switching. And some tracers like 'wakeup' may not update
'iter->private' in some cases when reopen, then it should be cleared
to avoid being mistakenly closed again.
The 54810 does not support c45. The mmd_phy_indirect accesses return
arbirtary values leading to odd behavior like saying it supports EEE
when it doesn't. We also see that reading/writing these non-existent
MMD registers leads to phy instability in some cases.
According to all consumers code of attrs[XFRMA_SEC_CTX], like
* verify_sec_ctx_len(), convert to xfrm_user_sec_ctx*
* xfrm_state_construct(), call security_xfrm_state_alloc whose prototype
is int security_xfrm_state_alloc(.., struct xfrm_user_sec_ctx *sec_ctx);
* copy_from_user_sec_ctx(), convert to xfrm_user_sec_ctx *
...
It seems that the expected parsing result for XFRMA_SEC_CTX should be
structure xfrm_user_sec_ctx, and the current xfrm_sec_ctx is confusing
and misleading (Luckily, they happen to have same size 8 bytes).
This commit amend the policy structure to xfrm_user_sec_ctx to avoid
ambiguity.
Fixes: cf5cb79f6946 ("[XFRM] netlink: Establish an attribute policy") Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the real workload, I encountered an issue which could cause the RTO
timer to retransmit the skb per 1ms with linear option enabled. The amount
of lost-retransmitted skbs can go up to 1000+ instantly.
The root cause is that if the icsk_rto happens to be zero in the 6th round
(which is the TCP_THIN_LINEAR_RETRIES value), then it will always be zero
due to the changed calculation method in tcp_retransmit_timer() as follows:
Above line could be converted to
icsk->icsk_rto = min(0 << 1, TCP_RTO_MAX) = 0
Therefore, the timer expires so quickly without any doubt.
I read through the RFC 6298 and found that the RTO value can be rounded
up to a certain value, in Linux, say TCP_RTO_MIN as default, which is
regarded as the lower bound in this patch as suggested by Eric.
Fixes: 36e31b0af587 ("net: TCP thin linear timeouts") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
af_unix: Fix null-ptr-deref in unix_stream_sendpage().
Bing-Jhong Billy Jheng reported null-ptr-deref in unix_stream_sendpage()
with detailed analysis and a nice repro.
unix_stream_sendpage() tries to add data to the last skb in the peer's
recv queue without locking the queue.
If the peer's FD is passed to another socket and the socket's FD is
passed to the peer, there is a loop between them. If we close both
sockets without receiving FD, the sockets will be cleaned up by garbage
collection.
The garbage collection iterates such sockets and unlinks skb with
FD from the socket's receive queue under the queue's lock.
So, there is a race where unix_stream_sendpage() could access an skb
locklessly that is being released by garbage collection, resulting in
use-after-free.
To avoid the issue, unix_stream_sendpage() must lock the peer's recv
queue.
Note the issue does not exist in 6.5+ thanks to the recent sendpage()
refactoring.
This patch is originally written by Linus Torvalds.
In SCTP protocol, it is using the same timer (T2 timer) for SHUTDOWN and
SHUTDOWN_ACK retransmission. However in sctp conntrack the default timeout
value for SCTP_CONNTRACK_SHUTDOWN_ACK_SENT state is 3 secs while it's 300
msecs for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV state.
As Paolo Valerio noticed, this might cause unwanted expiration of the ct
entry. In my test, with 1s tc netem delay set on the NAT path, after the
SHUTDOWN is sent, the sctp ct entry enters SCTP_CONNTRACK_SHUTDOWN_SEND
state. However, due to 300ms (too short) delay, when the SHUTDOWN_ACK is
sent back from the peer, the sctp ct entry has expired and been deleted,
and then the SHUTDOWN_ACK has to be dropped.
Also, it is confusing these two sysctl options always show 0 due to all
timeout values using sec as unit:
This patch fixes it by also using 3 secs for sctp shutdown send and recv
state in sctp conntrack, which is also RTO.initial value in SCTP protocol.
Note that the very short time value for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV
was probably used for a rare scenario where SHUTDOWN is sent on 1st path
but SHUTDOWN_ACK is replied on 2nd path, then a new connection started
immediately on 1st path. So this patch also moves from SHUTDOWN_SEND/RECV
to CLOSE when receiving INIT in the ORIGINAL direction.
Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.") Reported-by: Paolo Valerio <pvalerio@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function test_dev_config_update_u8() is called from both the locked
and the unlocked context, function config_num_requests_store() and
config_read_fw_idx_store() which can both be called asynchronously as
they are driver's methods, while test_dev_config_update_u8() and siblings
change their argument pointed to by u8 *cfg or similar pointer.
To avoid deadlock on test_fw_mutex, the lock is dropped before calling
test_dev_config_update_u8() and re-acquired within test_dev_config_update_u8()
itself, but alas this creates a race condition.
Having two locks wouldn't assure a race-proof mutual exclusion.
This situation is best avoided by the introduction of a new, unlocked
function __test_dev_config_update_u8() which can be called from the locked
context and reducing test_dev_config_update_u8() to:
static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg)
{
int ret;
mutex_lock(&test_fw_mutex);
ret = __test_dev_config_update_u8(buf, size, cfg);
mutex_unlock(&test_fw_mutex);
return ret;
}
doing the locking and calling the unlocked primitive, which enables both
locked and unlocked versions without duplication of code.
The similar approach was applied to all functions called from the locked
and the unlocked context, which safely mitigates both deadlocks and race
conditions in the driver.
__test_dev_config_update_bool(), __test_dev_config_update_u8() and
__test_dev_config_update_size_t() unlocked versions of the functions
were introduced to be called from the locked contexts as a workaround
without releasing the main driver's lock and thereof causing a race
condition.
The test_dev_config_update_bool(), test_dev_config_update_u8() and
test_dev_config_update_size_t() locked versions of the functions
are being called from driver methods without the unnecessary multiplying
of the locking and unlocking code for each method, and complicating
the code with saving of the return value across lock.
Fixes: 7feebfa487b92 ("test_firmware: add support for request_firmware_into_buf") Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russ Weight <russell.h.weight@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Tianfei Zhang <tianfei.zhang@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-kselftest@vger.kernel.org Cc: stable@vger.kernel.org # v5.4 Suggested-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Link: https://lore.kernel.org/r/20230509084746.48259-1-mirsad.todorovac@alu.unizg.hr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In binder_init(), the destruction of binder_alloc_shrinker_init() is not
performed in the wrong path, which will cause memory leaks. So this commit
introduces binder_alloc_shrinker_exit() and calls it in the wrong path to
fix that.
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Acked-by: Carlos Llamas <cmllamas@google.com> Fixes: f2517eb76f1f ("android: binder: Add global lru shrinker to binder") Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230625154937.64316-1-qi.zheng@linux.dev
[cmllamas: resolved trivial merge conflicts] Signed-off-by: Carlos Llamas <cmllamas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unloading a hardware specific 8250 driver can produce error "Unable to
handle kernel paging request at virtual address" about ten seconds after
unloading the driver. This happens on uart_hangup() calling
uart_change_pm().
Turns out commit 04e82793f068 ("serial: 8250: Reinit port->pm on port
specific driver unbind") was only a partial fix. If the hardware specific
driver has initialized port->pm function, we need to clear port->pm too.
Just reinitializing port->ops does not do this. Otherwise serial8250_pm()
will call port->pm() instead of serial8250_do_pm().
Fixes: 04e82793f068 ("serial: 8250: Reinit port->pm on port specific driver unbind") Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230804131553.52927-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Under the current code, when cifs_readpage_worker is called, the call
contract is that the callee should unlock the page. This is documented
in the read_folio section of Documentation/filesystems/vfs.rst as:
> The filesystem should unlock the folio once the read has completed,
> whether it was successful or not.
Without this change, when fscache is in use and cache hit occurs during
a read, the page lock is leaked, producing the following stack on
subsequent reads (via mmap) to the page:
This requires a reboot to resolve; it is a deadlock.
Note however that the call to cifs_readpage_from_fscache does mark the
page clean, but does not free the folio lock. This happens in
__cifs_readpage_from_fscache on success. Releasing the lock at that
point however is not appropriate as cifs_readahead also calls
cifs_readpage_from_fscache and *does* unconditionally release the lock
after its return. This change therefore effectively makes
cifs_readpage_worker work like cifs_readahead.
Signed-off-by: Russell Harmon <russ@har.mn> Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Reviewed-by: David Howells <dhowells@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 3953c46c3ac7 ("sk_buff: allow segmenting based on frag sizes") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Xin Long <lucien.xin@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20230816142158.1779798-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
So the conditions of leaving global pressure are inconstant, which
may lead to the situation that one pressured net-memcg prevents the
global pressure from being cleared when there is indeed no global
pressure, thus the global constrains are still in effect unexpectedly
on the other sockets.
This patch fixes this by ignoring the net-memcg's pressure when
deciding whether should leave global memory pressure.
Similar to commit 01f4fd270870 ("bonding: Fix incorrect deletion of
ETH_P_8021AD protocol vid from slaves"), we can trigger BUG_ON(!vlan_info)
in unregister_vlan_dev() with the following testcase:
# ip netns add ns1
# ip netns exec ns1 ip link add team1 type team
# ip netns exec ns1 ip link add team_slave type veth peer veth2
# ip netns exec ns1 ip link set team_slave master team1
# ip netns exec ns1 ip link add link team_slave name team_slave.10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link add link team1 name team1.10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link set team_slave nomaster
# ip netns del ns1
Add S-VLAN tag related features support to team driver. So the team driver
will always propagate the VLAN info to its slaves.
Fixes: 8ad227ff89a7 ("net: vlan: add 802.1ad support") Suggested-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230814032301.2804971-1-william.xuanziyang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Normally, x->replay_esn and x->preplay_esn should be allocated at
xfrm_alloc_replay_state_esn(...) in xfrm_state_construct(...), hence the
xfrm_update_ae_params(...) is okay to update them. However, the current
implementation of xfrm_new_ae(...) allows a malicious user to directly
dereference a NULL pointer and crash the kernel like below.
This Null-ptr-deref bug is assigned CVE-2023-3772. And this commit
adds additional NULL check in xfrm_update_ae_params to fix the NPD.
Fixes: d8647b79c3b7 ("xfrm: Add user interface for esn and big anti-replay windows") Signed-off-by: Lin Ma <linma@zju.edu.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When ip_vti device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when ip_vti device sends IPv6 packets.
As commit f855691975bb ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.
When ipv6_vti device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when ipv6_vti device sends IPv6 packets.
The stack information is as follows:
BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890
Read of size 1 at addr ffff88802e08edc2 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-next-20230707-00001-g84e2cad7f979 #410
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xd9/0x150
print_address_description.constprop.0+0x2c/0x3c0
kasan_report+0x11d/0x130
decode_session6+0x103f/0x1890
__xfrm_decode_session+0x54/0xb0
vti6_tnl_xmit+0x3e6/0x1ee0
dev_hard_start_xmit+0x187/0x700
sch_direct_xmit+0x1a3/0xc30
__qdisc_run+0x510/0x17a0
__dev_queue_xmit+0x2215/0x3b10
neigh_connected_output+0x3c2/0x550
ip6_finish_output2+0x55a/0x1550
ip6_finish_output+0x6b9/0x1270
ip6_output+0x1f1/0x540
ndisc_send_skb+0xa63/0x1890
ndisc_send_rs+0x132/0x6f0
addrconf_rs_timer+0x3f1/0x870
call_timer_fn+0x1a0/0x580
expire_timers+0x29b/0x4b0
run_timer_softirq+0x326/0x910
__do_softirq+0x1d4/0x905
irq_exit_rcu+0xb7/0x120
sysvec_apic_timer_interrupt+0x97/0xc0
</IRQ>
Allocated by task 9176:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
__kasan_slab_alloc+0x7f/0x90
kmem_cache_alloc_node+0x1cd/0x410
kmalloc_reserve+0x165/0x270
__alloc_skb+0x129/0x330
netlink_sendmsg+0x9b1/0xe30
sock_sendmsg+0xde/0x190
____sys_sendmsg+0x739/0x920
___sys_sendmsg+0x110/0x1b0
__sys_sendmsg+0xf7/0x1c0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 9176:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
kasan_save_free_info+0x2b/0x40
____kasan_slab_free+0x160/0x1c0
slab_free_freelist_hook+0x11b/0x220
kmem_cache_free+0xf0/0x490
skb_free_head+0x17f/0x1b0
skb_release_data+0x59c/0x850
consume_skb+0xd2/0x170
netlink_unicast+0x54f/0x7f0
netlink_sendmsg+0x926/0xe30
sock_sendmsg+0xde/0x190
____sys_sendmsg+0x739/0x920
___sys_sendmsg+0x110/0x1b0
__sys_sendmsg+0xf7/0x1c0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The buggy address belongs to the object at ffff88802e08ed00
which belongs to the cache skbuff_small_head of size 640
The buggy address is located 194 bytes inside of
freed 640-byte region [ffff88802e08ed00, ffff88802e08ef80)
As commit f855691975bb ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.
When running xfrm_state_walk_init(), the xfrm_address_filter being used
is okay to have a splen/dplen that equals to sizeof(xfrm_address_t)<<3.
This commit replaces >= to > to make sure the boundary checking is
correct.
Fixes: 37bd22420f85 ("af_key: pfkey_dump needs parameter validation") Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ 44.211730] ==================================================================
[ 44.212045] BUG: KASAN: slab-out-of-bounds in memcmp+0x8b/0xb0
[ 44.212045] Read of size 8 at addr ffff88800870f320 by task poc.xfrm/97
[ 44.212045]
[ 44.212045] CPU: 0 PID: 97 Comm: poc.xfrm Not tainted 6.4.0-rc7-00072-gdad9774deaf1-dirty #4
[ 44.212045] Call Trace:
[ 44.212045] <TASK>
[ 44.212045] dump_stack_lvl+0x37/0x50
[ 44.212045] print_report+0xcc/0x620
[ 44.212045] ? __virt_addr_valid+0xf3/0x170
[ 44.212045] ? memcmp+0x8b/0xb0
[ 44.212045] kasan_report+0xb2/0xe0
[ 44.212045] ? memcmp+0x8b/0xb0
[ 44.212045] kasan_check_range+0x39/0x1c0
[ 44.212045] memcmp+0x8b/0xb0
[ 44.212045] xfrm_state_walk+0x21c/0x420
[ 44.212045] ? __pfx_dump_one_state+0x10/0x10
[ 44.212045] xfrm_dump_sa+0x1e2/0x290
[ 44.212045] ? __pfx_xfrm_dump_sa+0x10/0x10
[ 44.212045] ? __kernel_text_address+0xd/0x40
[ 44.212045] ? kasan_unpoison+0x27/0x60
[ 44.212045] ? mutex_lock+0x60/0xe0
[ 44.212045] ? __pfx_mutex_lock+0x10/0x10
[ 44.212045] ? kasan_save_stack+0x22/0x50
[ 44.212045] netlink_dump+0x322/0x6c0
[ 44.212045] ? __pfx_netlink_dump+0x10/0x10
[ 44.212045] ? mutex_unlock+0x7f/0xd0
[ 44.212045] ? __pfx_mutex_unlock+0x10/0x10
[ 44.212045] __netlink_dump_start+0x353/0x430
[ 44.212045] xfrm_user_rcv_msg+0x3a4/0x410
[ 44.212045] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 44.212045] ? __pfx_xfrm_user_rcv_msg+0x10/0x10
[ 44.212045] ? __pfx_xfrm_dump_sa+0x10/0x10
[ 44.212045] ? __pfx_xfrm_dump_sa_done+0x10/0x10
[ 44.212045] ? __stack_depot_save+0x382/0x4e0
[ 44.212045] ? filter_irq_stacks+0x1c/0x70
[ 44.212045] ? kasan_save_stack+0x32/0x50
[ 44.212045] ? kasan_save_stack+0x22/0x50
[ 44.212045] ? kasan_set_track+0x25/0x30
[ 44.212045] ? __kasan_slab_alloc+0x59/0x70
[ 44.212045] ? kmem_cache_alloc_node+0xf7/0x260
[ 44.212045] ? kmalloc_reserve+0xab/0x120
[ 44.212045] ? __alloc_skb+0xcf/0x210
[ 44.212045] ? netlink_sendmsg+0x509/0x700
[ 44.212045] ? sock_sendmsg+0xde/0xe0
[ 44.212045] ? __sys_sendto+0x18d/0x230
[ 44.212045] ? __x64_sys_sendto+0x71/0x90
[ 44.212045] ? do_syscall_64+0x3f/0x90
[ 44.212045] ? entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 44.212045] ? netlink_sendmsg+0x509/0x700
[ 44.212045] ? sock_sendmsg+0xde/0xe0
[ 44.212045] ? __sys_sendto+0x18d/0x230
[ 44.212045] ? __x64_sys_sendto+0x71/0x90
[ 44.212045] ? do_syscall_64+0x3f/0x90
[ 44.212045] ? entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 44.212045] ? kasan_save_stack+0x22/0x50
[ 44.212045] ? kasan_set_track+0x25/0x30
[ 44.212045] ? kasan_save_free_info+0x2e/0x50
[ 44.212045] ? __kasan_slab_free+0x10a/0x190
[ 44.212045] ? kmem_cache_free+0x9c/0x340
[ 44.212045] ? netlink_recvmsg+0x23c/0x660
[ 44.212045] ? sock_recvmsg+0xeb/0xf0
[ 44.212045] ? __sys_recvfrom+0x13c/0x1f0
[ 44.212045] ? __x64_sys_recvfrom+0x71/0x90
[ 44.212045] ? do_syscall_64+0x3f/0x90
[ 44.212045] ? entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 44.212045] ? copyout+0x3e/0x50
[ 44.212045] netlink_rcv_skb+0xd6/0x210
[ 44.212045] ? __pfx_xfrm_user_rcv_msg+0x10/0x10
[ 44.212045] ? __pfx_netlink_rcv_skb+0x10/0x10
[ 44.212045] ? __pfx_sock_has_perm+0x10/0x10
[ 44.212045] ? mutex_lock+0x8d/0xe0
[ 44.212045] ? __pfx_mutex_lock+0x10/0x10
[ 44.212045] xfrm_netlink_rcv+0x44/0x50
[ 44.212045] netlink_unicast+0x36f/0x4c0
[ 44.212045] ? __pfx_netlink_unicast+0x10/0x10
[ 44.212045] ? netlink_recvmsg+0x500/0x660
[ 44.212045] netlink_sendmsg+0x3b7/0x700
[ 44.212045] ? __pfx_netlink_sendmsg+0x10/0x10
[ 44.212045] ? __pfx_netlink_sendmsg+0x10/0x10
[ 44.212045] sock_sendmsg+0xde/0xe0
[ 44.212045] __sys_sendto+0x18d/0x230
[ 44.212045] ? __pfx___sys_sendto+0x10/0x10
[ 44.212045] ? rcu_core+0x44a/0xe10
[ 44.212045] ? __rseq_handle_notify_resume+0x45b/0x740
[ 44.212045] ? _raw_spin_lock_irq+0x81/0xe0
[ 44.212045] ? __pfx___rseq_handle_notify_resume+0x10/0x10
[ 44.212045] ? __pfx_restore_fpregs_from_fpstate+0x10/0x10
[ 44.212045] ? __pfx_blkcg_maybe_throttle_current+0x10/0x10
[ 44.212045] ? __pfx_task_work_run+0x10/0x10
[ 44.212045] __x64_sys_sendto+0x71/0x90
[ 44.212045] do_syscall_64+0x3f/0x90
[ 44.212045] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 44.212045] RIP: 0033:0x44b7da
[ 44.212045] RSP: 002b:00007ffdc8838548 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[ 44.212045] RAX: ffffffffffffffda RBX: 00007ffdc8839978 RCX: 000000000044b7da
[ 44.212045] RDX: 0000000000000038 RSI: 00007ffdc8838770 RDI: 0000000000000003
[ 44.212045] RBP: 00007ffdc88385b0 R08: 00007ffdc883858c R09: 000000000000000c
[ 44.212045] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
[ 44.212045] R13: 00007ffdc8839968 R14: 00000000004c37d0 R15: 0000000000000001
[ 44.212045] </TASK>
[ 44.212045]
[ 44.212045] Allocated by task 97:
[ 44.212045] kasan_save_stack+0x22/0x50
[ 44.212045] kasan_set_track+0x25/0x30
[ 44.212045] __kasan_kmalloc+0x7f/0x90
[ 44.212045] __kmalloc_node_track_caller+0x5b/0x140
[ 44.212045] kmemdup+0x21/0x50
[ 44.212045] xfrm_dump_sa+0x17d/0x290
[ 44.212045] netlink_dump+0x322/0x6c0
[ 44.212045] __netlink_dump_start+0x353/0x430
[ 44.212045] xfrm_user_rcv_msg+0x3a4/0x410
[ 44.212045] netlink_rcv_skb+0xd6/0x210
[ 44.212045] xfrm_netlink_rcv+0x44/0x50
[ 44.212045] netlink_unicast+0x36f/0x4c0
[ 44.212045] netlink_sendmsg+0x3b7/0x700
[ 44.212045] sock_sendmsg+0xde/0xe0
[ 44.212045] __sys_sendto+0x18d/0x230
[ 44.212045] __x64_sys_sendto+0x71/0x90
[ 44.212045] do_syscall_64+0x3f/0x90
[ 44.212045] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 44.212045]
[ 44.212045] The buggy address belongs to the object at ffff88800870f300
[ 44.212045] which belongs to the cache kmalloc-64 of size 64
[ 44.212045] The buggy address is located 32 bytes inside of
[ 44.212045] allocated 36-byte region [ffff88800870f300, ffff88800870f324)
[ 44.212045]
[ 44.212045] The buggy address belongs to the physical page:
[ 44.212045] page:00000000e4de16ee refcount:1 mapcount:0 mapping:000000000 ...
[ 44.212045] flags: 0x100000000000200(slab|node=0|zone=1)
[ 44.212045] page_type: 0xffffffff()
[ 44.212045] raw: 0100000000000200ffff888004c41640dead0000000001220000000000000000
[ 44.212045] raw: 0000000000000000000000008020002000000001ffffffff0000000000000000
[ 44.212045] page dumped because: kasan: bad access detected
[ 44.212045]
[ 44.212045] Memory state around the buggy address:
[ 44.212045] ffff88800870f200: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 44.212045] ffff88800870f280: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
[ 44.212045] >ffff88800870f300: 00 00 00 00 04 fc fc fc fc fc fc fc fc fc fc fc
[ 44.212045] ^
[ 44.212045] ffff88800870f380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 44.212045] ffff88800870f400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 44.212045] ==================================================================
By investigating the code, we find the root cause of this OOB is the lack
of checks in xfrm_dump_sa(). The buggy code allows a malicious user to pass
arbitrary value of filter->splen/dplen. Hence, with crafted xfrm states,
the attacker can achieve 8 bytes heap OOB read, which causes info leak.
if (attrs[XFRMA_ADDRESS_FILTER]) {
filter = kmemdup(nla_data(attrs[XFRMA_ADDRESS_FILTER]),
sizeof(*filter), GFP_KERNEL);
if (filter == NULL)
return -ENOMEM;
// NO MORE CHECKS HERE !!!
}
This patch fixes the OOB by adding necessary boundary checks, just like
the code in pfkey_dump() function.
Fixes: d3623099d350 ("ipsec: add support of limited SA dump") Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
fence Decrements the reference count before exiting.
Avoid Race Vulnerabilities for fence use-after-free.
v2 (chk): actually fix the use after free and not just move it.
Signed-off-by: shanzhulig <shanzhulig@gmail.com> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When nonstatic_release_resource_db() frees all resources associated
with an PCMCIA socket, it forgets to free socket_data too, causing
a memory leak observable with kmemleak:
To fix these possible data races, the lock sdp->sd_tune.gt_spin is
acquired before accessing the fields of gfs2_tune and released after these
accesses.
Further changes by Andreas:
- Don't hold the spin lock over the seq_printf operations.
Reported-by: BassCheck <bass@buaa.edu.cn> Signed-off-by: Tuo Li <islituo@gmail.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Getting below error when using KCSAN to check the driver. Adding lock to
protect parameter num_rdy when getting the value with function:
v4l2_m2m_num_src_bufs_ready/v4l2_m2m_num_dst_bufs_ready.
kworker/u16:3: [name:report&]BUG: KCSAN: data-race in v4l2_m2m_buf_queue
kworker/u16:3: [name:report&]
kworker/u16:3: [name:report&]read-write to 0xffffff8105f35b94 of 1 bytes by task 20865 on cpu 7:
kworker/u16:3: v4l2_m2m_buf_queue+0xd8/0x10c
Syzkaller reported an issue where txBegin may be called
on a superblock in a read-only mounted filesystem which leads
to NULL pointer deref. This could be solved by checking if
the filesystem is read-only before calling txBegin, and returning
with appropiate error code.
Zero-length arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace zero-length array with flexible-array
member in struct memmap.
Address the following warning found after building (with GCC-13) mips64
with decstation_64_defconfig:
In function 'rex_setup_memory_region',
inlined from 'prom_meminit' at arch/mips/dec/prom/memory.c:91:3:
arch/mips/dec/prom/memory.c:72:31: error: array subscript i is outside array bounds of 'unsigned char[0]' [-Werror=array-bounds=]
72 | if (bm->bitmap[i] == 0xff)
| ~~~~~~~~~~^~~
In file included from arch/mips/dec/prom/memory.c:16:
./arch/mips/include/asm/dec/prom.h: In function 'prom_meminit':
./arch/mips/include/asm/dec/prom.h:73:23: note: while referencing 'bitmap'
73 | unsigned char bitmap[0];
This helps with the ongoing efforts to globally enable -Warray-bounds.
The bug occurs when the dbAllocDmapLev()function attempts to access
dp->tree.stree[leafidx + LEAFIND] while the leafidx value is negative.
To rectify this, the patch introduces a safeguard within the
dbAllocDmapLev() function. A check has been added to verify if leafidx is
negative. If it is, the function immediately returns an I/O error, preventing
any further execution that could potentially cause harm.
For filenames that begin with . and are between 2 and 5 characters long,
UDF charset conversion code would read uninitialized memory in the
output buffer. The only practical impact is that the name may be prepended a
"unification hash" when it is not actually needed but still it is good
to fix this.
Above issue may happens as follows:
ProcessA ProcessB ProcessC
sys_fsconfig
vfs_fsconfig_locked
reconfigure_super
ext4_remount
dquot_suspend -> suspend all type quota
__dquot_initialize
__dquot_initialize
dqget
if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags))
ext4_acquire_dquot
-> Return error DQ_ACTIVE_B flag isn't set
dquot_disable
invalidate_dquots
if (atomic_read(&dquot->dq_count))
dqgrab
WARN_ON_ONCE(!test_bit(DQ_ACTIVE_B, &dquot->dq_flags))
-> Trigger warning
In the above scenario, 'dquot->dq_flags' has no DQ_ACTIVE_B is normal when
dqgrab().
To solve above issue just replace the dqgrab() use in invalidate_dquots() with
atomic_inc(&dquot->dq_count).
Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230605140731.2427629-3-yebin10@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When add_dquot_ref() fails (usually due to IO error or ENOMEM), we want
to disable quotas we are trying to enable. However dquot_disable() call
was passed just the flags we are enabling so in case flags ==
DQUOT_USAGE_ENABLED dquot_disable() call will just fail with EINVAL
instead of properly disabling quotas. Fix the problem by always passing
DQUOT_LIMITS_ENABLED | DQUOT_USAGE_ENABLED to dquot_disable() in this
case.
Reported-and-tested-by: Ye Bin <yebin10@huawei.com> Reported-by: syzbot+e633c79ceaecbf479854@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230605140731.2427629-2-yebin10@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The type of size is unsigned, if size is 0x40000000, there will be an
integer overflow, size will be zero after size *= sizeof(uint32_t),
will cause uninitialized memory to be referenced later
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: hackyzh002 <hackyzh002@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
lib/mpi/generic_mpih-mul1.c:37:24: error: invalid use of a cast in a
inline asm context requiring an l-value: remove the cast or build with
-fheinous-gnu-extensions
umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb);
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/mpi/longlong.h:652:20: note: expanded from macro 'umul_ppmm'
: "=l" ((USItype)(w0)), \
~~~~~~~~~~^~~
lib/mpi/generic_mpih-mul1.c:37:3: error: invalid output constraint '=h'
in asm
umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb);
^
lib/mpi/longlong.h:653:7: note: expanded from macro 'umul_ppmm'
"=h" ((USItype)(w1)) \
^
2 errors generated.
The C version that is used for GCC 4.4 and up works well with clang;
however, it is not currently being used because Clang masks itself
as GCC 4.2.1 for compatibility reasons. As Nick points out, we require
GCC 4.6 and newer in the kernel so we can eliminate all of the
versioning checks and just use the C version of umul_ppmm for all
supported compilers.
Link: https://github.com/ClangBuiltLinux/linux/issues/605 Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If device_add() returns error, the name allocated by dev_set_name() needs
be freed. As the comment of device_add() says, put_device() should be used
to decrease the reference count in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanp().
Fixes: ee959b00c335 ("SCSI: convert struct class_device to struct device") Signed-off-by: Zhu Wang <wangzhu9@huawei.com> Link: https://lore.kernel.org/r/20230803020230.226903-1-wangzhu9@huawei.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If device_add() returns error, the name allocated by dev_set_name() needs
be freed. As the comment of device_add() says, put_device() should be used
to give up the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanp().
Fixes: c8806b6c9e82 ("snic: driver for Cisco SCSI HBA") Signed-off-by: Zhu Wang <wangzhu9@huawei.com> Acked-by: Narsimhulu Musini <nmusini@cisco.com> Link: https://lore.kernel.org/r/20230801111421.63651-1-wangzhu9@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hyper-V provides the ability to connect Fibre Channel LUNs to the host
system and present them in a guest VM as a SCSI device. I/O to the vFC
device is handled by the storvsc driver. The storvsc driver includes a
partial integration with the FC transport implemented in the generic
portion of the Linux SCSI subsystem so that FC attributes can be displayed
in /sys. However, the partial integration means that some aspects of vFC
don't work properly. Unfortunately, a full and correct integration isn't
practical because of limitations in what Hyper-V provides to the guest.
In particular, in the context of Hyper-V storvsc, the FC transport timeout
function fc_eh_timed_out() causes a kernel panic because it can't find the
rport and dereferences a NULL pointer. The original patch that added the
call from storvsc_eh_timed_out() to fc_eh_timed_out() is faulty in this
regard.
In many cases a timeout is due to a transient condition, so the situation
can be improved by just continuing to wait like with other I/O requests
issued by storvsc, and avoiding the guaranteed panic. For a permanent
failure, continuing to wait may result in a hung thread instead of a panic,
which again may be better.
So fix the panic by removing the storvsc call to fc_eh_timed_out(). This
allows storvsc to keep waiting for a response. The change has been tested
by users who experienced a panic in fc_eh_timed_out() due to transient
timeouts, and it solves their problem.
In the future we may want to deprecate the vFC functionality in storvsc
since it can't be fully fixed. But it has current users for whom it is
working well enough, so it should probably stay for a while longer.
Fixes: 3930d7309807 ("scsi: storvsc: use default I/O timeout handler for FC devices") Cc: stable@vger.kernel.org Signed-off-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1690606764-79669-1-git-send-email-mikelley@microsoft.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(lightly modified commit message mostly by Linus Torvalds)
The parsing code for /proc/scsi/scsi is disgusting and broken. We should
have just used 'sscanf()' or something simple like that, but the logic may
actually predate our kernel sscanf library routine for all I know. It
certainly predates both git and BK histories.
And we can't change it to be something sane like that now, because the
string matching at the start is done case-insensitively, and the separator
parsing between numbers isn't done at all, so *any* separator will work,
including a possible terminating NUL character.
This interface is root-only, and entirely for legacy use, so there is
absolutely no point in trying to tighten up the parsing. Because any
separator has traditionally worked, it's entirely possible that people have
used random characters rather than the suggested space.
So don't bother to try to pretty it up, and let's just make a minimal patch
that can be back-ported and we can forget about this whole sorry thing for
another two decades.
Just make it at least not read past the end of the supplied data.
Link: https://lore.kernel.org/linux-scsi/b570f5fe-cb7c-863a-6ed9-f6774c219b88@cybernetics.com/ Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin K Petersen <martin.petersen@oracle.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Willy Tarreau <w@1wt.eu> Cc: stable@kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Martin K Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
extent_write_cache_pages stops writing pages as soon as nr_to_write hits
zero. That is the right thing for opportunistic writeback, but incorrect
for data integrity writeback, which needs to ensure that no dirty pages
are left in the range. Thus only stop the writeback for WB_SYNC_NONE
if nr_to_write hits 0.
This is a port of write_cache_pages changes in commit 05fe478dd04e
("mm: write_cache_pages integrity fix").
Note that I've only trigger the problem with other changes to the btrfs
writeback code, but this condition seems worthwhile fixing anyway.
CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com>
[ updated comment ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During hotplug remove it is possible that the update counters work
might be pending, and may run after memory has been freed.
Cancel the update counters work before freeing memory.
Fixes: 7724105686e7 ("IB/hfi1: add driver files") Signed-off-by: Douglas Miller <doug.miller@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Link: https://lore.kernel.org/r/169099756100.3927190.15284930454106475280.stgit@awfm-02.cornelisnetworks.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using the syzkaller repro with reduced packet size it was discovered
that XDP_PACKET_HEADROOM is not checked in tun_can_build_skb(),
although pad may be incremented in tun_build_skb(). This may end up
with exceeding the PAGE_SIZE limit in tun_build_skb().
Jason Wang <jasowang@redhat.com> proposed to count XDP_PACKET_HEADROOM
always (e.g. without rcu_access_pointer(tun->xdp_prog)) in
tun_can_build_skb() since there's a window during which XDP program
might be attached between tun_can_build_skb() and tun_build_skb().
BUG_ON(!vlan_info) is triggered in unregister_vlan_dev() with
following testcase:
# ip netns add ns1
# ip netns exec ns1 ip link add bond0 type bond mode 0
# ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2
# ip netns exec ns1 ip link set bond_slave_1 master bond0
# ip netns exec ns1 ip link add link bond_slave_1 name vlan10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link add link bond0 name bond0_vlan10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link set bond_slave_1 nomaster
# ip netns del ns1
The logical analysis of the problem is as follows:
1. create ETH_P_8021AD protocol vlan10 for bond_slave_1:
register_vlan_dev()
vlan_vid_add()
vlan_info_alloc()
__vlan_vid_add() // add [ETH_P_8021AD, 10] vid to bond_slave_1
2. create ETH_P_8021AD protocol bond0_vlan10 for bond0:
register_vlan_dev()
vlan_vid_add()
__vlan_vid_add()
vlan_add_rx_filter_info()
if (!vlan_hw_filter_capable(dev, proto)) // condition established because bond0 without NETIF_F_HW_VLAN_STAG_FILTER
return 0;
if (netif_device_present(dev))
return dev->netdev_ops->ndo_vlan_rx_add_vid(dev, proto, vid); // will be never called
// The slaves of bond0 will not refer to the [ETH_P_8021AD, 10] vid.
3. detach bond_slave_1 from bond0:
__bond_release_one()
vlan_vids_del_by_dev()
list_for_each_entry(vid_info, &vlan_info->vid_list, list)
vlan_vid_del(dev, vid_info->proto, vid_info->vid);
// bond_slave_1 [ETH_P_8021AD, 10] vid will be deleted.
// bond_slave_1->vlan_info will be assigned NULL.
4. delete vlan10 during delete ns1:
default_device_exit_batch()
dev->rtnl_link_ops->dellink() // unregister_vlan_dev() for vlan10
vlan_info = rtnl_dereference(real_dev->vlan_info); // real_dev of vlan10 is bond_slave_1
BUG_ON(!vlan_info); // bond_slave_1->vlan_info is NULL now, bug is triggered!!!
Add S-VLAN tag related features support to bond driver. So the bond driver
will always propagate the VLAN info to its slaves.
value changed: 0x0000000000000000 -> 0x0000000020000081
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 6.4.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20230803145600.2937518-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The original commit adding that check tried to protect the kenrel against
a potential invalid NULL pointer access.
However we call nouveau_connector_detect_depth once without a native_mode
set on purpose for non LVDS connectors and this broke DP support in a few
cases.
Cc: Olaf Skibbe <news@kravcenko.com> Cc: Lyude Paul <lyude@redhat.com> Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/238 Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/245 Fixes: 20a2ce87fbaf8 ("drm/nouveau/dp: check for NULL nv_connector->native_mode") Signed-off-by: Karol Herbst <kherbst@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230805101813.2603989-1-kherbst@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This might confuse users who are not aware of 5-level paging and expect
all userspace addresses to be under the 47-bit border.
So far problem has only been triggered with ASLR disabled, although it
may also occur with ASLR enabled if the layout is randomized in a just
right way.
The problem happens due to custom placement for the VMAs in the VDSO
code: vdso_addr() tries to place them above the stack and checks the
result against TASK_SIZE_MAX, which is wrong. TASK_SIZE_MAX is set to
the 56-bit border on 5-level paging machines. Use DEFAULT_MAP_WINDOW
instead.
Fixes: b569bab78d8d ("x86/mm: Prepare to expose larger address space to userspace") Reported-by: Yingcong Wu <yingcong.wu@intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20230803151609.22141-1-kirill.shutemov%40linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If dwc3 is runtime suspended we defer processing the event buffer
until resume, by setting the pending_events flag. Set this flag before
triggering resume to avoid race with the runtime resume callback.
While handling the pending events, in addition to checking the event
buffer we also need to process it. Handle this by explicitly calling
dwc3_thread_interrupt(). Also balance the runtime pm get() operation
that triggered this processing.
Syzbot got KMSAN to complain about access to an uninitialized value in
the alauda subdriver of usb-storage:
BUG: KMSAN: uninit-value in alauda_transport+0x462/0x57f0
drivers/usb/storage/alauda.c:1137
CPU: 0 PID: 12279 Comm: usb-storage Not tainted 5.3.0-rc7+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x191/0x1f0 lib/dump_stack.c:113
kmsan_report+0x13a/0x2b0 mm/kmsan/kmsan_report.c:108
__msan_warning+0x73/0xe0 mm/kmsan/kmsan_instr.c:250
alauda_check_media+0x344/0x3310 drivers/usb/storage/alauda.c:460
The problem is that alauda_check_media() doesn't verify that its USB
transfer succeeded before trying to use the received data. What
should happen if the transfer fails isn't entirely clear, but a
reasonably conservative approach is to pretend that no media is
present.
A similar problem exists in a usb_stor_dbg() call in
alauda_get_media_status(). In this case, when an error occurs the
call is redundant, because usb_stor_ctrl_transfer() already will print
a debugging message.
Finally, unrelated to the uninitialized memory access, is the fact
that alauda_check_media() performs DMA to a buffer on the stack.
Fortunately usb-storage provides a general purpose DMA-able buffer for
uses like this. We'll use it instead.
The struct cros_ec_command contains several integer fields and a
trailing array. An allocation size neglecting the integer fields can
lead to buffer overrun.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Yiyuan Guo <yguoaz@gmail.com> Fixes: 974e6f02e27e ("iio: cros_ec_sensors_core: Add common functions for the ChromeOS EC Sensor Hub.") Link: https://lore.kernel.org/r/20230630143719.1513906-1-yguoaz@gmail.com Cc: <Stable@vger.kerenl.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
name = kstrndup(buf, count, GFP_KERNEL);
if (!name)
return -ENOSPC;
the error is not actually "No space left on device", but "Out of memory".
It is semantically correct to return -ENOMEM in all failed kstrndup()
and kzalloc() cases in this driver, as it is not a problem with disk
space, but with kernel memory allocator failing allocation.
The semantically correct should be:
name = kstrndup(buf, count, GFP_KERNEL);
if (!name)
return -ENOMEM;
Cc: Dan Carpenter <error27@gmail.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Kees Cook <keescook@chromium.org> Cc: "Luis R. Rodriguez" <mcgrof@ruslug.rutgers.edu> Cc: Scott Branden <sbranden@broadcom.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Brian Norris <briannorris@chromium.org> Fixes: c92316bf8e948 ("test_firmware: add batched firmware tests") Fixes: 0a8adf584759c ("test: add firmware_class loader test") Fixes: 548193cba2a7d ("test_firmware: add support for firmware_request_platform") Fixes: eb910947c82f9 ("test: firmware_class: add asynchronous request trigger") Fixes: 061132d2b9c95 ("test_firmware: add test custom fallback trigger") Fixes: 7feebfa487b92 ("test_firmware: add support for request_firmware_into_buf") Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <20230606070808.9300-1-mirsad.todorovac@alu.unizg.hr> Signed-off-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During unmount process of nilfs2, nothing holds nilfs_root structure after
nilfs2 detaches its writer in nilfs_detach_log_writer(). Previously,
nilfs_evict_inode() could cause use-after-free read for nilfs_root if
inodes are left in "garbage_list" and released by nilfs_dispose_list at
the end of nilfs_detach_log_writer(), and this bug was fixed by commit 9b5a04ac3ad9 ("nilfs2: fix use-after-free bug of nilfs_root in
nilfs_evict_inode()").
However, it turned out that there is another possibility of UAF in the
call path where mark_inode_dirty_sync() is called from iput():
This can happen after commit 0ae45f63d4ef ("vfs: add support for a
lazytime mount option"), which changed iput() to call
mark_inode_dirty_sync() on its final reference if i_state has I_DIRTY_TIME
flag and i_nlink is non-zero.
This issue appears after commit 28a65b49eb53 ("nilfs2: do not write dirty
data after degenerating to read-only") when using the syzbot reproducer,
but the issue has potentially existed before.
Fix this issue by adding a "purging flag" to the nilfs structure, setting
that flag while disposing the "garbage_list" and checking it in
__nilfs_mark_inode_dirty().
Unlike commit 9b5a04ac3ad9 ("nilfs2: fix use-after-free bug of nilfs_root
in nilfs_evict_inode()"), this patch does not rely on ns_writer to
determine whether to skip operations, so as not to break recovery on
mount. The nilfs_salvage_orphan_logs routine dirties the buffer of
salvaged data before attaching the log writer, so changing
__nilfs_mark_inode_dirty() to skip the operation when ns_writer is NULL
will cause recovery write to fail. The purpose of using the cleanup-only
flag is to allow for narrowing of such conditions.
Link: https://lkml.kernel.org/r/20230728191318.33047-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+74db8b3087f293d3a13a@syzkaller.appspotmail.com Closes: https://lkml.kernel.org/r/000000000000b4e906060113fd63@google.com Fixes: 0ae45f63d4ef ("vfs: add support for a lazytime mount option") Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> # 4.0+ Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the pthread allocation for each array item is based on the size
of a pthread_t pointer and should be the size of the pthread_t structure,
so the allocation is under-allocating the correct size. Fix this by using
the size of each element in the pthreads array.
Static analysis cppcheck reported:
tools/testing/radix-tree/regression1.c:180:2: warning: Size of pointer
'threads' used instead of size of its data. [pointerSize]
Link: https://lkml.kernel.org/r/20230727160930.632674-1-colin.i.king@gmail.com Fixes: 1366c37ed84b ("radix tree test harness") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pl330_pause() does not set anything to indicate paused condition which
causes pl330_tx_status() to return DMA_IN_PROGRESS. This breaks 8250
DMA flush after the fix in commit 57e9af7831dc ("serial: 8250_dma: Fix
DMA Rx rearm race"). The function comment for pl330_pause() claims
pause is supported but resume is not which is enough for 8250 DMA flush
to work as long as DMA status reports DMA_PAUSED when appropriate.
Add PAUSED state for descriptor and mark BUSY descriptors with PAUSED
in pl330_pause(). Return DMA_PAUSED from pl330_tx_status() when the
descriptor is PAUSED.
The upcoming (and nearly finalized):
https://datatracker.ietf.org/doc/draft-collink-6man-pio-pflag/
will update the IPv6 RA to include a new flag in the PIO field,
which will serve as a hint to perform DHCPv6-PD.
As we don't want DHCPv6 related logic inside the kernel, this piece of
information needs to be exposed to userspace. The simplest option is to
simply expose the entire PIO through the already existing mechanism.
Even without this new flag, the already existing PIO R (router address)
flag (from RFC6275) cannot AFAICT be handled entirely in kernel,
and provides useful information that should be exposed to userspace
(the router's global address, for use by Mobile IPv6).
Also cc'ing stable@ for inclusion in LTS, as while technically this is
not quite a bugfix, and instead more of a feature, it is absolutely
trivial and the alternative is manually cherrypicking into all Android
Common Kernel trees - and I know Greg will ask for it to be sent in via
LTS instead...
Cc: Jen Linkova <furry@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: David Ahern <dsahern@gmail.com> Cc: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org> Cc: stable@vger.kernel.org Signed-off-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20230807102533.1147559-1-maze@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Conversion from big-endian to native is done in a common function
mmc_app_send_scr(). Converting in moxart_transfer_pio() is extra.
Double conversion on a LE system returns an incorrect SCR value,
leads to errors:
mmc0: unrecognised SCR structure version 8
Fixes: 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver") Signed-off-by: Sergei Antonov <saproj@gmail.com> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230627120549.2400325-1-saproj@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sparc: fix up arch_cpu_finalize_init() build breakage.
In commit 39f0e159b8e8 ("sparc/cpu: Switch to arch_cpu_finalize_init()") the
check for ARCH_HAS_CPU_FINALIZE_INIT was backported incorrectly to the SPARC
config option, not SPARC32. This causes build problems for the sparc64 arch:
sparc64-linux-ld: init/main.o: in function `start_kernel':
main.c:(.init.text+0x77c): undefined reference to `arch_cpu_finalize_init'
Fix this up by putting the option in the correct place.
Commit 991fcb77f490 ("drm/edid: Fix uninitialized variable in
drm_cvt_modes()") just replaced one warning with another.
The original warning about a possibly uninitialized variable was due to
the compiler not being smart enough to see that the case statement
actually enumerated all possible cases. And the initial fix was just to
add a "default" case that had a single "unreachable()", just to tell the
compiler that that situation cannot happen.
However, that doesn't actually fix the fundamental reason for the
problem: the compiler still doesn't see that the existing case
statements enumerate all possibilities, so the compiler will still
generate code to jump to that unreachable case statement. It just won't
complain about an uninitialized variable any more.
So now the compiler generates code to our inline asm marker that we told
it would not fall through, and end end result is basically random. We
have created a bridge to nowhere.
And then, depending on the random details of just exactly what the
compiler ends up doing, 'objtool' might end up complaining about the
conditional branches (for conditions that cannot happen, and that thus
will never be taken - but if the compiler was not smart enough to figure
that out, we can't expect objtool to do so) going off in the weeds.
So depending on how the compiler has laid out the result, you might see
something like this:
drivers/gpu/drm/drm_edid.o: warning: objtool: do_cvt_mode() falls through to next function drm_mode_detailed.isra.0()
and now you have a truly inscrutable warning that makes no sense at all
unless you start looking at whatever random code the compiler happened
to generate for our bare "unreachable()" statement.
IOW, don't use "unreachable()" unless you have an _active_ operation
that generates code that actually makes it obvious that something is not
reachable (ie an UD instruction or similar).
Solve the "compiler isn't smart enough" problem by just marking one of
the cases as "default", so that even when the compiler doesn't otherwise
see that we've enumerated all cases, the compiler will feel happy and
safe about there always being a valid case that initializes the 'width'
variable.
This also generates better code, since now the compiler doesn't generate
comparisons for five different possibilities (the four real ones and the
one that can't happen), but just for the three real ones and "the rest"
(which is that last one).
A smart enough compiler that sees that we cover all the cases won't care.
Cc: Lyude Paul <lyude@redhat.com> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter spotted that test_fw_config->reqs will be leaked if
trigger_batched_requests_store() is called two or more times.
The same appears with trigger_batched_requests_async_store().
This bug wasn't trigger by the tests, but observed by Dan's visual
inspection of the code.
The recommended workaround was to return -EBUSY if test_fw_config->reqs
is already allocated.
Fixes: 7feebfa487b92 ("test_firmware: add support for request_firmware_into_buf") Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russ Weight <russell.h.weight@intel.com> Cc: Tianfei Zhang <tianfei.zhang@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-kselftest@vger.kernel.org Cc: stable@vger.kernel.org # v5.4 Suggested-by: Dan Carpenter <error27@gmail.com> Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20230509084746.48259-2-mirsad.todorovac@alu.unizg.hr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ext2 has fields in superblock reserved for subblock allocation support.
However that never landed. Drop the many years dead code.
Reported-by: syzbot+af5e10f73dbff48f70af@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This bug is caused by the fact that usbnet trusts the bulk endpoint
addresses its probe routine receives in the driver_info structure, and
it does not check to see that these endpoints actually exist and have
the expected type and directions.
The fix is simply to add such a check.
Reported-and-tested-by: syzbot+63ee658b9a100ffadbe2@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/000000000000a56e9105d0cec021@google.com/ Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/ea152b6d-44df-4f8a-95c6-4db51143dcc1@rowland.harvard.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
l2cap_sock_release(sk) frees sk. However, sk's children are still alive
and point to the already free'd sk's address.
To fix this, l2cap_sock_release(sk) also cleans sk's children.
==================================================================
BUG: KASAN: use-after-free in l2cap_sock_ready_cb+0xb7/0x100 net/bluetooth/l2cap_sock.c:1650
Read of size 8 at addr ffff888104617aa8 by task kworker/u3:0/276
The buggy address belongs to the object at ffff888104617800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 680 bytes inside of
1024-byte region [ffff888104617800, ffff888104617c00)
Ack: This bug is found by FuzzBT with a modified Syzkaller. Other
contributors are Ruoyu Wu and Hui Peng. Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SL-A300, B500/5600, and C700 devices no longer auto-load because of
"usbnet: Remove over-broad module alias from zaurus."
This patch adds IDs for those 3 devices.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217632 Fixes: 16adf5d07987 ("usbnet: Remove over-broad module alias from zaurus.") Signed-off-by: Ross Maynard <bids.7405@bigpond.com> Cc: stable@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/69b5423b-2013-9fc9-9569-58e707d9bafb@bigpond.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the cluster becomes unavailable, ceph_osdc_notify() may hang even
with osd_request_timeout option set because linger_notify_finish_wait()
waits for MWatchNotify NOTIFY_COMPLETE message with no associated OSD
request in flight -- it's completely asynchronous.
Introduce an additional timeout, derived from the specified notify
timeout. While at it, switch both waits to killable which is more
correct.
Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We noticed that the user interface of Android devices becomes very slow
under memory pressure. This is because Android uses the zram driver on top
of the loop driver for swapping, because under memory pressure the swap
code alternates reads and writes quickly, because mq-deadline is the
default scheduler for loop devices and because mq-deadline delays writes by
five seconds for such a workload with default settings. Fix this by making
the kernel select I/O scheduler 'none' from inside add_disk() for loop
devices. This default can be overridden at any time from user space,
e.g. via a udev rule. This approach has an advantage compared to changing
the I/O scheduler from userspace from 'mq-deadline' into 'none', namely
that synchronize_rcu() does not get called.
This patch changes the default I/O scheduler for loop devices from
'mq-deadline' into 'none'.
Additionally, this patch reduces the Android boot time on my test setup
with 0.5 seconds compared to configuring the loop I/O scheduler from user
space.
Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Martijn Coenen <maco@android.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210805174200.3250718-3-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Whenever tcpm_new() reclaims an old entry, tcpm_suck_dst()
would overwrite data that could be read from tcp_fastopen_cache_get()
or tcp_metrics_fill_info().
We need to acquire fastopen_seqlock to maintain consistency.
For newly allocated objects, tcpm_new() can switch to kzalloc()
to avoid an extra fastopen_seqlock acquisition.
Fixes: 1fe4c481ba63 ("net-tcp: Fast Open client - cookie cache") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230802131500.1478140-7-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Instead of changing write_pnet() and read_pnet() and potentially
hurt performance, add the needed READ_ONCE()/WRITE_ONCE()
in tm_net() and tcpm_new().
Fixes: 849e8a0ca8d5 ("tcp_metrics: Add a field tcpm_net and verify it matches on lookup") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230802131500.1478140-6-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / linux-stable / log