In case of a system crash, dm-era might fail to mark blocks as written
in its metadata, although the corresponding writes to these blocks were
passed down to the origin device and completed successfully.
Consider the following sequence of events:
1. We write to a block that has not been yet written in the current era
2. era_map() checks the in-core bitmap for the current era and sees
that the block is not marked as written.
3. The write is deferred for submission after the metadata have been
updated and committed.
4. The worker thread processes the deferred write
(process_deferred_bios()) and marks the block as written in the
in-core bitmap, **before** committing the metadata.
5. The worker thread starts committing the metadata.
6. We do more writes that map to the same block as the write of step (1)
7. era_map() checks the in-core bitmap and sees that the block is marked
as written, **although the metadata have not been committed yet**.
8. These writes are passed down to the origin device immediately and the
device reports them as completed.
9. The system crashes, e.g., power failure, before the commit from step
(5) finishes.
When the system recovers and we query the dm-era target for the list of
written blocks it doesn't report the aforementioned block as written,
although the writes of step (6) completed successfully.
The issue is that era_map() decides whether to defer or not a write
based on non committed information. The root cause of the bug is that we
update the in-core bitmap, **before** committing the metadata.
Fix this by updating the in-core bitmap **after** successfully
committing the metadata.
The icmp{,v6}_send functions make all sorts of use of skb->cb, casting
it with IPCB or IP6CB, assuming the skb to have come directly from the
inet layer. But when the packet comes from the ndo layer, especially
when forwarded, there's no telling what might be in skb->cb at that
point. As a result, the icmp sending code risks reading bogus memory
contents, which can result in nasty stack overflows such as this one
reported by a user:
In icmp_send, skb->cb is cast with IPCB and an ip_options struct is read
from it. The optlen parameter there is of particular note, as it can
induce writes beyond bounds. There are quite a few ways that can happen
in __ip_options_echo. For example:
// sptr/skb are attacker-controlled skb bytes
sptr = skb_network_header(skb);
// dptr/dopt points to stack memory allocated by __icmp_send
dptr = dopt->__data;
// sopt is the corrupt skb->cb in question
if (sopt->rr) {
optlen = sptr[sopt->rr+1]; // corrupt skb->cb + skb->data
soffset = sptr[sopt->rr+2]; // corrupt skb->cb + skb->data
// this now writes potentially attacker-controlled data, over
// flowing the stack:
memcpy(dptr, sptr+sopt->rr, optlen);
}
In the icmpv6_send case, the story is similar, but not as dire, as only
IP6CB(skb)->iif and IP6CB(skb)->dsthao are used. The dsthao case is
worse than the iif case, but it is passed to ipv6_find_tlv, which does
a bit of bounds checking on the value.
This is easy to simulate by doing a `memset(skb->cb, 0x41,
sizeof(skb->cb));` before calling icmp{,v6}_ndo_send, and it's only by
good fortune and the rarity of icmp sending from that context that we've
avoided reports like this until now. For example, in KASAN:
BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xa0e/0x12b0
Write of size 38 at addr ffff888006f1f80e by task ping/89
CPU: 2 PID: 89 Comm: ping Not tainted 5.10.0-rc7-debug+ #5
Call Trace:
dump_stack+0x9a/0xcc
print_address_description.constprop.0+0x1a/0x160
__kasan_report.cold+0x20/0x38
kasan_report+0x32/0x40
check_memory_region+0x145/0x1a0
memcpy+0x39/0x60
__ip_options_echo+0xa0e/0x12b0
__icmp_send+0x744/0x1700
Actually, out of the 4 drivers that do this, only gtp zeroed the cb for
the v4 case, while the rest did not. So this commit actually removes the
gtp-specific zeroing, while putting the code where it belongs in the
shared infrastructure of icmp{,v6}_ndo_send.
This commit fixes the issue by passing an empty IPCB or IP6CB along to
the functions that actually do the work. For the icmp_send, this was
already trivial, thanks to __icmp_send providing the plumbing function.
For icmpv6_send, this required a tiny bit of refactoring to make it
behave like the v4 case, after which it was straight forward.
If IPv6 is builtin, we do not need an expensive indirect call
to reach icmp6_send().
v2: put inline keyword before the type to avoid sparse warnings.
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because xfrmi is calling icmp from network device context, it should use
the ndo helper so that the rate limiting applies correctly.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because sunvnet is calling icmp from network device context, it should use
the ndo helper so that the rate limiting applies correctly. While we're
at it, doing the additional route lookup before calling icmp_ndo_send is
superfluous, since this is the job of the icmp code in the first place.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because gtp is calling icmp from network device context, it should use
the ndo helper so that the rate limiting applies correctly.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The icmpv6_send function has long had a static inline implementation
with an empty body for CONFIG_IPV6=n, so that code calling it doesn't
need to be ifdef'd. The new icmpv6_ndo_send function, which is intended
for drivers as a drop-in replacement with an identical function
signature, should follow the same pattern. Without this patch, drivers
that used to work with CONFIG_IPV6=n now result in a linker error.
Cc: Chen Zhou <chenzhou10@huawei.com> Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 0b41713b6066 ("icmp: introduce helper for nat'd source address in network device context") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This introduces a helper function to be called only by network drivers
that wraps calls to icmp[v6]_send in a conntrack transformation, in case
NAT has been used. We don't want to pollute the non-driver path, though,
so we introduce this as a helper to be called by places that actually
make use of this, as suggested by Florian.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Metadata resize shouldn't happen in the ctr. The ctr loads a temporary
(inactive) table that will only become active upon resume. That is why
resize should always be done in terms of resume. Otherwise a load (ctr)
whose inactive table never becomes active will incorrectly resize the
metadata.
Also, perform the resize directly in preresume, instead of using the
worker to do it.
The worker might run other metadata operations, e.g., it could start
digestion, before resizing the metadata. These operations will end up
using the old size.
In case of devices with at most 64 blocks, the digestion of consecutive
eras uses the writeset of the first era as the writeset of all eras to
digest, leading to lost writes. That is, we lose the information about
what blocks were written during the affected eras.
The digestion code uses a dm_disk_bitset object to access the archived
writesets. This structure includes a one word (64-bit) cache to reduce
the number of array lookups.
This structure is initialized only once, in metadata_digest_start(),
when we kick off digestion.
But, when we insert a new writeset into the writeset tree, before the
digestion of the previous writeset is done, or equivalently when there
are multiple writesets in the writeset tree to digest, then all these
writesets are digested using the same cache and the cache is not
re-initialized when moving from one writeset to the next.
For devices with more than 64 blocks, i.e., the size of the cache, the
cache is indirectly invalidated when we move to a next set of blocks, so
we avoid the bug.
But for devices with at most 64 blocks we end up using the same cached
data for digesting all archived writesets, i.e., the cache is loaded
when digesting the first writeset and it never gets reloaded, until the
digestion is done.
As a result, the writeset of the first era to digest is used as the
writeset of all the following archived eras, leading to lost writes.
Fix this by reinitializing the dm_disk_bitset structure, and thus
invalidating the cache, every time the digestion code starts digesting a
new writeset.
dm-era doesn't support changing the data block size of existing devices,
so check explicitly that the requested block size for a new target
matches the one stored in the metadata.
Following a system crash, dm-era fails to recover the committed writeset
for the current era, leading to lost writes. That is, we lose the
information about what blocks were written during the affected era.
dm-era assumes that the writeset of the current era is archived when the
device is suspended. So, when resuming the device, it just moves on to
the next era, ignoring the committed writeset.
This assumption holds when the device is properly shut down. But, when
the system crashes, the code that suspends the target never runs, so the
writeset for the current era is not archived.
There are three issues that cause the committed writeset to get lost:
1. dm-era doesn't load the committed writeset when opening the metadata
2. The code that resizes the metadata wipes the information about the
committed writeset (assuming it was loaded at step 1)
3. era_preresume() starts a new era, without taking into account that
the current era might not have been archived, due to a system crash.
To fix this:
1. Load the committed writeset when opening the metadata
2. Fix the code that resizes the metadata to make sure it doesn't wipe
the loaded writeset
3. Fix era_preresume() to check for a loaded writeset and archive it,
before starting a new era.
The system would deadlock when swapping to a dm-crypt device. The reason
is that for each incoming write bio, dm-crypt allocates memory that holds
encrypted data. These excessive allocations exhaust all the memory and the
result is either deadlock or OOM trigger.
This patch limits the number of in-flight swap bios, so that the memory
consumed by dm-crypt is limited. The limit is enforced if the target set
the "limit_swap_bios" variable and if the bio has REQ_SWAP set.
Non-swap bios are not affected becuase taking the semaphore would cause
performance degradation.
This is similar to request-based drivers - they will also block when the
number of requests is over the limit.
Patch fb6791d100d1 was designed to allow gfs2 to unmount quicker by
skipping the step where it tells dlm to unlock glocks in EX with lvbs.
This was done because when gfs2 unmounts a file system, it destroys the
dlm lockspace shortly after it destroys the glocks so it doesn't need to
unlock them all: the unlock is implied when the lockspace is destroyed
by dlm.
However, that patch introduced a use-after-free in dlm: as part of its
normal dlm_recoverd process, it can call ls_recovery to recover dead
locks. In so doing, it can call recover_rsbs which calls recover_lvb for
any mastered rsbs. Func recover_lvb runs through the list of lkbs queued
to the given rsb (if the glock is cached but unlocked, it will still be
queued to the lkb, but in NL--Unlocked--mode) and if it has an lvb,
copies it to the rsb, thus trying to preserve the lkb. However, when
gfs2 skips the dlm unlock step, it frees the glock and its lvb, which
means dlm's function recover_lvb references the now freed lvb pointer,
copying the freed lvb memory to the rsb.
This patch changes the check in gdlm_put_lock so that it calls
dlm_unlock for all glocks that contain an lvb pointer.
Fixes: fb6791d100d1 ("GFS2: skip dlm_unlock calls in unmount") Cc: stable@vger.kernel.org # v3.8+ Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Back in 2.1.29 the clear_user() guts (__bzero()) had been merged
with memset(). Unfortunately, while all exception handlers had been
copied, one of the exception table entries got lost. As the result,
clear_user() starting at 128*n bytes before the end of page and
spanning between 8 and 127 bytes into the next page would oops when
the second page is unmapped. It's trivial to reproduce - all
it takes is
which had been oopsing since March 1997. Says something about
the quality of test coverage... ;-/ And while today sparc32 port
is nearly dead, back in '97 it had been very much alive; in fact,
sparc64 had only been in mainline for 3 months by that point...
Cc: stable@kernel.org Fixes: v2.1.29 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, when turbo is disabled (either by BIOS or by the user),
the intel_pstate driver reads the max non-turbo frequency from the
package-wide MSR_PLATFORM_INFO(0xce) register.
However, on asymmetric platforms it is possible in theory that small
and big core with HWP enabled might have different max non-turbo CPU
frequency, because MSR_HWP_CAPABILITIES is per-CPU scope according
to Intel Software Developer Manual.
The turbo max freq is already per-CPU in current code, so make
similar change to the max non-turbo frequency as well.
Reported-by: Wendy Wang <wendy.wang@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com>
[ rjw: Subject and changelog edits ] Cc: 4.18+ <stable@vger.kernel.org> # 4.18+: a45ee4d4e13b: cpufreq: intel_pstate: Change intel_pstate_get_hwp_max() argument Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
printk_safe_flush_on_panic() caused the following deadlock on our
server:
CPU0: CPU1:
panic rcu_dump_cpu_stacks
kdump_nmi_shootdown_cpus nmi_trigger_cpumask_backtrace
register_nmi_handler(crash_nmi_callback) printk_safe_flush
__printk_safe_flush
raw_spin_lock_irqsave(&read_lock)
// send NMI to other processors
apic_send_IPI_allbutself(NMI_VECTOR)
// NMI interrupt, dead loop
crash_nmi_callback
printk_safe_flush_on_panic
printk_safe_flush
__printk_safe_flush
// deadlock
raw_spin_lock_irqsave(&read_lock)
DEADLOCK: read_lock is taken on CPU1 and will never get released.
It happens when panic() stops a CPU by NMI while it has been in
the middle of printk_safe_flush().
Handle the lock the same way as logbuf_lock. The printk_safe buffers
are flushed only when both locks can be safely taken. It can avoid
the deadlock _in this particular case_ at expense of losing contents
of printk_safe buffers.
Note: It would actually be safe to re-init the locks when all CPUs were
stopped by NMI. But it would require passing this information
from arch-specific code. It is not worth the complexity.
Especially because logbuf_lock and printk_safe buffers have been
obsoleted by the lockless ring buffer.
Fixes: cf9b1106c81c ("printk/nmi: flush NMI messages on the system panic") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: <stable@vger.kernel.org> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210210034823.64867-1-songmuchun@bytedance.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If no n_latch value will be provided at driver probe then all pins will
be used as an input:
gpio->out = ~n_latch;
In that case initial state for all pins is "one":
gpio->status = gpio->out;
So if pcf857x IRQ happens with change pin value from "zero" to "one"
then we miss it, because of "one" from IRQ and "one" from initial state
leaves corresponding pin unchanged:
change = (gpio->status ^ status) & gpio->irq_enabled;
The right solution will be to read actual state at driver probe.
In sdhci_esdhc_imx_remove() the SDHCI_INT_STATUS in read. Under some
circumstances, this may be done while the device is runtime suspended,
triggering the below splat.
Fix the problem by adding a pm_runtime_get_sync(), before reading the
register, which will turn on clocks etc making the device accessible again.
clang-12 -fno-pic (since
https://github.com/llvm/llvm-project/commit/a084c0388e2a59b9556f2de0083333232da3f1d6)
can emit `call __stack_chk_fail@PLT` instead of `call __stack_chk_fail`
on x86. The two forms should have identical behaviors on x86-64 but the
former causes GNU as<2.37 to produce an unreferenced undefined symbol
_GLOBAL_OFFSET_TABLE_.
(On x86-32, there is an R_386_PC32 vs R_386_PLT32 difference but the
linker behavior is identical as far as Linux kernel is concerned.)
Simply ignore _GLOBAL_OFFSET_TABLE_ for now, like what
scripts/mod/modpost.c:ignore_undef_symbol does. This also fixes the
problem for gcc/clang -fpie and -fpic, which may emit `call foo@PLT` for
external function calls on x86.
Note: ld -z defs and dynamic loaders do not error for unreferenced
undefined symbols so the module loader is reading too much. If we ever
need to ignore more symbols, the code should be refactored to ignore
unreferenced symbols.
Cc: <stable@vger.kernel.org> Link: https://github.com/ClangBuiltLinux/linux/issues/1250 Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27178 Reported-by: Marco Elver <elver@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Marco Elver <elver@google.com> Signed-off-by: Fangrui Song <maskray@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The erratum 1024718 affects Cortex-A55 r0p0 to r2p0. However
we apply the work around for r0p0 - r1p0. Unfortunately this
won't be fixed for the future revisions for the CPU. Thus
extend the work around for all versions of A55, to cover
for r2p0 and any future revisions.
Cc: stable@vger.kernel.org Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20210203230057.3961239-1-suzuki.poulose@arm.com
[will: Update Kconfig help text] Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(while true; do
cat /sys/bus/nd/devices/nmem*/available_slots 2>&1 > /dev/null
done) &
while true; do
for i in $(seq 0 4); do
echo nmem$i > /sys/bus/nd/drivers/nvdimm/bind
done
for i in $(seq 0 4); do
echo nmem$i > /sys/bus/nd/drivers/nvdimm/unbind
done
done
The root cause is that available_slots_show() consults driver-data, but
fails to synchronize against device-unbind setting up a TOCTOU race to
access uninitialized memory.
Validate driver-data under the device-lock.
Fixes: 4d88a97aa9e8 ("libnvdimm, nvdimm: dimm driver and base libnvdimm device-driver infrastructure") Cc: <stable@vger.kernel.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Coly Li <colyli@suse.com> Reported-by: Richard Palethorpe <rpalethorpe@suse.com> Acked-by: Richard Palethorpe <rpalethorpe@suse.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
[sudip: use device_lock()] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
page structs are not guaranteed to be contiguous for gigantic pages. The
routine copy_huge_page_from_user can encounter gigantic pages, yet it
assumes page structs are contiguous when copying pages from user space.
Since page structs for the target gigantic page are not contiguous, the
data copied from user space could overwrite other pages not associated
with the gigantic page and cause data corruption.
Non-contiguous page structs are generally not an issue. However, they can
exist with a specific kernel configuration and hotplug operations. For
example: Configure the kernel with CONFIG_SPARSEMEM and
!CONFIG_SPARSEMEM_VMEMMAP. Then, hotplug add memory for the area where
the gigantic page will be allocated.
Link: https://lkml.kernel.org/r/20210217184926.33567-2-mike.kravetz@oracle.com Fixes: 8fb5debc5fcd ("userfaultfd: hugetlbfs: add hugetlb_mcopy_atomic_pte for userfaultfd support") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The memtype seq_file iterator allocates a buffer in the ->start and ->next
functions and frees it in the ->show function. The preferred handling for
such resources is to free them in the subsequent ->next or ->stop function
call.
Since Commit 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration
code and interface") there is no guarantee that ->show will be called
after ->next, so this function can now leak memory.
So move the freeing of the buffer to ->next and ->stop.
Link: https://lkml.kernel.org/r/161248539022.21478.13874455485854739066.stgit@noble1 Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code and interface") Signed-off-by: NeilBrown <neilb@suse.de> Cc: Xin Long <lucien.xin@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch series "Fix some seq_file users that were recently broken".
A recent change to seq_file broke some users which were using seq_file
in a non-"standard" way ... though the "standard" isn't documented, so
they can be excused. The result is a possible leak - of memory in one
case, of references to a 'transport' in the other.
These three patches:
1/ document and explain the problem
2/ fix the problem user in x86
3/ fix the problem user in net/sctp
This patch (of 3):
Users of seq_file will sometimes find it convenient to take a resource,
such as a lock or memory allocation, in the ->start or ->next operations.
These are per-entry resources, distinct from per-session resources which
are taken in ->start and released in ->stop.
The preferred management of these is release the resource on the
subsequent call to ->next or ->stop.
However prior to Commit 1f4aace60b0e ("fs/seq_file.c: simplify seq_file
iteration code and interface") it happened that ->show would always be
called after ->start or ->next, and a few users chose to release the
resource in ->show.
This is no longer reliable. Since the mentioned commit, ->next will
always come after a successful ->show (to ensure m->index is updated
correctly), so the original ordering cannot be maintained.
This patch updates the documentation to clearly state the required
behaviour. Other patches will fix the few problematic users.
[akpm@linux-foundation.org: fix typo, per Willy]
Link: https://lkml.kernel.org/r/161248518659.21478.2484341937387294998.stgit@noble1 Link: https://lkml.kernel.org/r/161248539020.21478.3147971477400875336.stgit@noble1 Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code and interface") Signed-off-by: NeilBrown <neilb@suse.de> Cc: Xin Long <lucien.xin@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MEI bus has a special behavior on suspend it destroys
all the attached devices, this is due to the fact that also
firmware context is not persistent across power flows.
If watchdog on MEI bus is ticking before suspending the firmware
times out and reports that the OS is missing watchdog tick.
Send the stop command to the firmware on watchdog unregistered
to eliminate the false event on suspend.
This does not make the things worse from the user-space perspective
as a user-space should re-open watchdog device after
suspending before this patch.
Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210124114938.373885-1-tomas.winkler@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As stated in linux/errno.h, ENOTSUPP should never be seen by user programs.
When we set up uprobe with 32-bit perf and arm64 kernel, we would see the
following vague error without useful hint.
The sys_perf_event_open() syscall returned with 524 (INTERNAL ERROR:
strerror_r(524, [buf], 128)=22)
This issue was originally fixed in 09954bad4 ("floppy: refactor open()
flags handling").
The fix as a side-effect, however, introduce issue for open(O_ACCMODE)
that is being used for ioctl-only open. I wrote a fix for that, but
instead of it being merged, full revert of 09954bad4 was performed,
re-introducing the O_NDELAY / O_NONBLOCK issue, and it strikes again.
This is a forward-port of the original fix to current codebase; the
original submission had the changelog below:
====
Commit 09954bad4 ("floppy: refactor open() flags handling"), as a
side-effect, causes open(/dev/fdX, O_ACCMODE) to fail. It turns out that
this is being used setfdprm userspace for ioctl-only open().
Reintroduce back the original behavior wrt !(FMODE_READ|FMODE_WRITE)
modes, while still keeping the original O_NDELAY bug fixed.
Force all CPUs to do VMXOFF (via NMI shootdown) during an emergency
reboot if VMX is _supported_, as VMX being off on the current CPU does
not prevent other CPUs from being in VMX root (post-VMXON). This fixes
a bug where a crash/panic reboot could leave other CPUs in VMX root and
prevent them from being woken via INIT-SIPI-SIPI in the new kernel.
Fixes: d176720d34c7 ("x86: disable VMX on all CPUs on reboot") Cc: stable@vger.kernel.org Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: David P. Reed <dpreed@deepplum.com>
[sean: reworked changelog and further tweaked comment] Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20201231002702.2223707-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver is only used by RALINK MIPS MT7621 SoCs. Tested by building
against that target using OpenWrt with Linux 5.10.10.
Fixes the following error:
error: the following would cause module name conflict:
drivers/dma/mediatek/mtk-hsdma.ko
drivers/staging/mt7621-dma/mtk-hsdma.ko
Both pstore_compress() and decompress_record() use a mistyped config
option name ("PSTORE_COMPRESSION" instead of "PSTORE_COMPRESS"). As
a result compression and decompression of pstore records was always
disabled.
syzbot found WARNING in qp_broker_alloc[1] in qp_host_alloc_queue()
when num_pages is 0x100001, giving queue_size + queue_page_size
bigger than KMALLOC_MAX_SIZE for kzalloc(), resulting order >= MAX_ORDER
condition.
queue_size + queue_page_size=0x8000d8, where KMALLOC_MAX_SIZE=0x400000.
We don't actually care about the value, since the kernel will panic
before that; but a value should nonetheless be returned, otherwise the
compiler will complain.
The optimized cipher function need length multiple of 4 bytes.
But it get sometimes odd length.
This is due to SG data could be stored with an offset.
So the fix is to check also if the offset is aligned with 4 bytes. Fixes: 6298e948215f2 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator") Cc: <stable@vger.kernel.org> Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The accelerated, instruction based implementations of SHA1, SHA2 and
SHA3 are autoloaded based on CPU capabilities, given that the code is
modest in size, and widely used, which means that resolving the algo
name, loading all compatible modules and picking the one with the
highest priority is taken to be suboptimal.
However, if these algorithms are requested before this CPU feature
based matching and autoloading occurs, these modules are not even
considered, and we end up with suboptimal performance.
So add the missing module aliases for the various SHA implementations.
At btrfs_copy_root(), if the call to btrfs_inc_ref() fails we end up
returning without unlocking and releasing our reference on the extent
buffer named "cow" we previously allocated with btrfs_alloc_tree_block().
So fix that by unlocking the extent buffer and dropping our reference on
it before returning.
Fixes: be20aa9dbadc8c ("Btrfs: Add mount option to turn off data cow") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When recovering a relocation, if we run into a reloc root that has 0
refs we simply add it to the reloc_control->reloc_roots list, and then
clean it up later. The problem with this is __del_reloc_root() doesn't
do anything if the root isn't in the radix tree, which in this case it
won't be because we never call __add_reloc_root() on the reloc_root.
This exit condition simply isn't correct really. During normal
operation we can remove ourselves from the rb tree and then we're meant
to clean up later at merge_reloc_roots() time, and this happens
correctly. During recovery we're depending on free_reloc_roots() to
drop our references, but we're short-circuiting.
Fix this by continuing to check if we're on the list and dropping
ourselves from the reloc_control root list and dropping our reference
appropriately. Change the corresponding BUG_ON() to an ASSERT() that
does the correct thing if we aren't in the rb tree.
CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While testing my error handling patches, I added a error injection site
at btrfs_inc_extent_ref, to validate the error handling I added was
doing the correct thing. However I hit a pretty ugly corruption while
doing this check, with the following error injection stack trace:
This is because we do not catch the error from btrfs_inc_extent_ref,
which in practice would be ENOMEM, which means we lose the extent
references for a root that has already been allocated and inserted,
which is the problem. Fix this by aborting the transaction if we fail
to do the reference modification.
CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current release locality code seems to be based on the
misunderstanding that the TPM interrupts when a locality is released:
it doesn't, only when the locality is acquired.
Furthermore, there seems to be no point in waiting for the locality to
be released. All it does is penalize the last TPM user. However, if
there's no next TPM user, this is a pointless wait and if there is a
next TPM user, they'll pay the penalty waiting for the new locality
(or possibly not if it's the same as the old locality).
Fix the code by making release_locality as simple write to release
with no waiting for completion.
Cc: stable@ger.kernel.org Fixes: 33bafe90824b ("tpm_tis: verify locality released before returning from release_locality") Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The TPM TIS specification says the TPM signals the acquisition of locality
when the TMP_ACCESS_REQUEST_USE bit goes to one *and* the
TPM_ACCESS_REQUEST_USE bit goes to zero. Currently we only check the
former not the latter, so check both. Adding the check on
TPM_ACCESS_REQUEST_USE should fix the case where the locality is
re-requested before the TPM has released it. In this case the locality may
get released briefly before it is reacquired, which causes all sorts of
problems. However, with the added check, TPM_ACCESS_REQUEST_USE should
remain 1 until the second request for the locality is granted.
Cc: stable@ger.kernel.org Fixes: 27084efee0c3 ("[PATCH] tpm: driver for next generation TPM chips") Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dep->interval captures the number of frames/microframes per interval
from bInterval. Fullspeed interrupt endpoint bInterval is the number of
frames per interval and not 2^(bInterval - 1). So fix it here. This
change is only for debugging purpose and should not affect the interrupt
endpoint operation.
Valid range for DEPCFG.bInterval_m1 is from 0 to 13, and it must be set
to 0 when the controller operates in full-speed. See the programming
guide for DEPCFG command section 3.2.2.1 (v3.30a).
musb_queue_resume_work() would call the provided callback if the runtime
PM status was 'active'. Otherwise, it would enqueue the request if the
hardware was still suspended (musb->is_runtime_suspended is true).
This causes a race with the runtime PM handlers, as it is possible to be
in the case where the runtime PM status is not yet 'active', but the
hardware has been awaken (PM resume function has been called).
When hitting the race, the resume work was not enqueued, which probably
triggered other bugs further down the stack. For instance, a telnet
connection on Ingenic SoCs would result in a 50/50 chance of a
segmentation fault somewhere in the musb code.
Rework the code so that either we call the callback directly if
(musb->is_runtime_suspended == 0), or enqueue the query otherwise.
Fixes: ea2f35c01d5e ("usb: musb: Fix sleeping function called from invalid context for hdrc glue") Cc: stable@vger.kernel.org # v4.9+ Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20210123142502.16980-1-paul@crapouillou.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch prepares for qmi_wwan driver support for the device.
Previously "option" driver mapped itself to interfaces 0 and 3 (matching
ff/ff/ff), while interface 3 is in fact a QMI port.
Interfaces 1 and 2 (matching ff/00/00) expose AT commands,
and weren't supported previously at all.
Without this patch, a possible conflict would exist if device ID was
added to qmi_wwan driver for interface 3.
Update and simplify device ID to match interfaces 0-2 directly,
to expose QCDM (0), PCUI (1), and modem (2) ports and avoid conflict
with QMI (3), and ADB (4).
The modem is used inside ZTE MF283+ router and carriers identify it as
such.
Interface mapping is:
0: QCDM, 1: AT (PCUI), 2: AT (Modem), 3: QMI, 4: ADB
After commit 77b425399f6d ("Input: i8042 - use chassis info to skip
selftest on Asus laptops"), all modern Asus laptops have the i8042
selftest disabled. It has done by using chassys type "10" (laptop).
The Asus Zenbook Flip suffers from similar suspend/resume issues, but
it _sometimes_ work and sometimes it doesn't. Setting noselftest makes
it work reliably. In this case, we need to add chassis type "31"
(convertible) in order to avoid selftest in this device.
Reported-by: Ludvig Norgren Guldhag <ludvigng@gmail.com> Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com> Link: https://lore.kernel.org/r/20210219164638.761-1-mpdesouza@suse.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The problem here is that "len" might be less than "joydev->nabs" so the
loops which verfy abspam[i] and keypam[] might read beyond the buffer.
Fixes: 999b874f4aa3 ("Input: joydev - validate axis/button maps before clobbering current ones") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YCyzR8WvFRw4HWw6@mwanda
[dtor: additional check for len being even in joydev_handle_JSIOCSBTNMAP] Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `wacom_feature_mapping` function is careful to only set the the
touch_max value a single time, but this care does not extend to the
`wacom_wac_finger_event` function. In particular, if a device sends
multiple HID_DG_CONTACTMAX items in a single feature report, the
driver will end up retaining the value of last item.
The HID descriptor for the Cintiq Companion 2 does exactly this. It
incorrectly sets a "Report Count" of 2, which will cause the driver
to process two HID_DG_CONTACTCOUNT items. The first item has the actual
count, while the second item should have been declared as a constant
zero. The constant zero is the value the driver ends up using, however,
since it is the last HID_DG_CONTACTCOUNT in the report.
Report ID (16),
Usage (Contact Count Maximum), ; Contact count maximum (55h, static value)
Report Count (2),
Logical Maximum (10),
Feature (Variable),
To address this, we add a check that the touch_max is not already set
within the `wacom_wac_finger_event` function that processes the
HID_DG_TOUCHMAX item. We emit a warning if the value is set and ignore
the updated value.
This could potentially cause problems if there is a tablet which has
a similar issue but requires the last item to be used. This is unlikely,
however, since it would have to have a different non-zero value for
HID_DG_CONTACTMAX earlier in the same report, which makes no sense
except in the case of a firmware bug. Note that cases where the
HID_DG_CONTACTMAX items are in different reports is already handled
(and similarly ignored) by `wacom_feature_mapping` as mentioned above.
Link: https://github.com/linuxwacom/input-wacom/issues/223 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A list_add corruption is reported by Hulk Robot like this:
==============
list_add corruption.
Call Trace:
link_obj+0xc0/0x1c0
link_group+0x21/0x140
configfs_register_subsystem+0xdb/0x380
acpi_configfs_init+0x25/0x1000 [acpi_configfs]
do_one_initcall+0x149/0x820
do_init_module+0x1ef/0x720
load_module+0x35c8/0x4380
__do_sys_finit_module+0x10d/0x1a0
do_syscall_64+0x34/0x80
It's because of the missing check after configfs_register_default_group,
where configfs_unregister_subsystem should be called once failure.
Fixes: 612bd01fc6e0 ("ACPI: add support for loading SSDTs via configfs") Reported-by: Hulk Robot <hulkci@huawei.com> Suggested-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Cc: 4.10+ <stable@vger.kernel.org> # 4.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Property matching does not work for ACPI fwnodes if the value of the
given property is not represented as a package in the _DSD package
containing it. For example, the "compatible" property in the _DSD
below
will not be found by fwnode_property_match_string(), because the ACPI
code handling device properties does not regard the single value as a
"list" in that case.
Namely, fwnode_property_match_string() invoked to match a given
string property value first calls fwnode_property_read_string_array()
with the last two arguments equal to NULL and 0, respectively, in
order to count the items in the value of the given property, with the
assumption that this value may be an array. For ACPI fwnodes, that
operation is carried out by acpi_node_prop_read() which calls
acpi_data_prop_read() for this purpose. However, when the return
(val) pointer is NULL, that function only looks for a property whose
value is a package without checking the single-value case at all.
To fix that, make acpi_data_prop_read() check the single-value
case if its return pointer argument is NULL and modify
acpi_data_prop_read_single() handling that case to attempt to
read the value of the property if the return pointer is NULL
and return 1 if that succeeds.
Fixes: 3708184afc77 ("device property: Move FW type specific functionality to FW specific files") Reported-by: Calvin Johnson <calvin.johnson@oss.nxp.com> Cc: 4.13+ <stable@vger.kernel.org> # 4.13+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We get I/O errors when we run md-raid1 on the top of dm-integrity on the
top of ramdisk.
device-mapper: integrity: Bio not aligned on 8 sectors: 0xff00, 0xff
device-mapper: integrity: Bio not aligned on 8 sectors: 0xff00, 0xff
device-mapper: integrity: Bio not aligned on 8 sectors: 0xffff, 0x1
device-mapper: integrity: Bio not aligned on 8 sectors: 0xffff, 0x1
device-mapper: integrity: Bio not aligned on 8 sectors: 0x8048, 0xff
device-mapper: integrity: Bio not aligned on 8 sectors: 0x8147, 0xff
device-mapper: integrity: Bio not aligned on 8 sectors: 0x8246, 0xff
device-mapper: integrity: Bio not aligned on 8 sectors: 0x8345, 0xbb
The ramdisk device has logical_block_size 512 and max_sectors 255. The
dm-integrity device uses logical_block_size 4096 and it doesn't affect the
"max_sectors" value - thus, it inherits 255 from the ramdisk. So, we have
a device with max_sectors not aligned on logical_block_size.
The md-raid device sees that the underlying leg has max_sectors 255 and it
will split the bios on 255-sector boundary, making the bios unaligned on
logical_block_size.
In order to fix the bug, we round down max_sectors to logical_block_size.
Cc: stable@vger.kernel.org Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CNIC depends on MMU, but since 'select' does not follow any dependency
chains, SCSI_BNX2X_FCOE also needs to depend on MMU, so that erroneous
configs are not generated, which cause build errors in cnic.
riscv64-linux-ld: drivers/net/ethernet/broadcom/cnic.o: in function `.L154':
cnic.c:(.text+0x1094): undefined reference to `uio_event_notify'
riscv64-linux-ld: cnic.c:(.text+0x10bc): undefined reference to `uio_event_notify'
riscv64-linux-ld: drivers/net/ethernet/broadcom/cnic.o: in function `.L1442':
cnic.c:(.text+0x96a8): undefined reference to `__uio_register_device'
riscv64-linux-ld: drivers/net/ethernet/broadcom/cnic.o: in function `.L0 ':
cnic.c:(.text.unlikely+0x68): undefined reference to `uio_unregister_device'
Link: https://lore.kernel.org/r/20210213192428.22537-1-rdunlap@infradead.org Fixes: 853e2bd2103a ("[SCSI] bnx2fc: Broadcom FCoE offload driver") Cc: Saurav Kashyap <skashyap@marvell.com> Cc: Javed Hasan <jhasan@marvell.com> Cc: GR-QLogic-Storage-Upstream@marvell.com Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
For PMD-mapped page (usually THP), pvmw->pte is NULL. For PTE-mapped THP,
pvmw->pte is mapped. But for HugeTLB pages, pvmw->pte is not mapped and
set to the relevant page table entry. So in page_vma_mapped_walk_done(),
we may do pte_unmap() for HugeTLB pte which is not mapped. Fix this by
checking pvmw->page against PageHuge before trying to do pte_unmap().
Link: https://lkml.kernel.org/r/20210127093349.39081-1-linmiaohe@huawei.com Fixes: ace71a19cec5 ("mm: introduce page_vma_mapped_walk()") Signed-off-by: Hongxiang Lou <louhongxiang@huawei.com> Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michel Lespinasse <walken@google.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The brcmstb_send_i2c_cmd currently has a condition that is (CMD_RD ||
CMD_WR) which always evaluates to true, while the obvious fix is to test
whether the cmd variable passed as parameter holds one of these two
values.
Although there has been a bit of back and forth on the subject, it
appears that invalidating TLBs requires an ISB instruction when FEAT_ETS
is not implemented by the CPU.
From the bible:
| In an implementation that does not implement FEAT_ETS, a TLB
| maintenance instruction executed by a PE, PEx, can complete at any
| time after it is issued, but is only guaranteed to be finished for a
| PE, PEx, after the execution of DSB by the PEx followed by a Context
| synchronization event
Add the missing ISB in __primary_switch, just in case.
Fixes: 3c5e9f238bc4 ("arm64: head.S: move KASLR processing out of __enable_mmu()") Suggested-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20210224093738.3629662-3-maz@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Josef reported [0] that using jumbo packets fails on RTL8168e.
Aligning the values for register MaxTxPacketSize with the
vendor driver fixes the problem.
In hugetlb_sysfs_add_hstate(), we would do kobject_put() on hstate_kobjs
when failed to create sysfs group but forget to set hstate_kobjs to NULL.
Then in hugetlb_register_node() error path, we may free it again via
hugetlb_unregister_node().
Link: https://lkml.kernel.org/r/20210107123249.36964-1-linmiaohe@huawei.com Fixes: a3437870160c ("hugetlb: new sysfs interface") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Muchun Song <smuchun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since commit 42e4089c7890 ("x86/speculation/l1tf: Disallow non privileged
high MMIO PROT_NONE mappings"), when the first pfn modify is not allowed,
we would break the loop with pte unchanged. Then the wrong pte - 1 would
be passed to pte_unmap_unlock.
Andi said:
"While the fix is correct, I'm not sure if it actually is a real bug.
Is there any architecture that would do something else than unlocking
the underlying page? If it's just the underlying page then it should
be always the same page, so no bug"
Link: https://lkml.kernel.org/r/20210109080118.20885-1-linmiaohe@huawei.com Fixes: 42e4089c789 ("x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings") Signed-off-by: Hongxiang Lou <louhongxiang@huawei.com> Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The error handling in this function frees "reg" but it is still on the
"o2hb_all_regions" list so it will lead to a use after freew. Joseph Qi
points out that we need to clear the bit in the "o2hb_region_bitmap" as
well
Link: https://lkml.kernel.org/r/YBk4M6HUG8jB/jc7@mwanda Fixes: 1cf257f51191 ("ocfs2: fix memory leak") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The debug check must be done after unregister_netdevice_many() call --
the hlist_del_rcu() for this is done inside .ndo_stop.
This is the same with commit 0fda7600c2e1 ("geneve: move debug check after
netdev unregister")
Test commands:
ip netns del A
ip netns add A
ip netns add B
ip netns exec B ip link add vxlan0 type vxlan vni 100 local 10.0.0.1 \
remote 10.0.0.2 dstport 4789 srcport 4789 4789
ip netns exec B ip link set vxlan0 netns A
ip netns exec A ip link set vxlan0 up
ip netns del B
mlx4_do_mirror_rule() forgets to call mlx4_free_cmd_mailbox() to
free the memory region allocated by mlx4_alloc_cmd_mailbox() before
an exit.
Add the missed call to fix it.
Fixes: 78efed275117 ("net/mlx4_core: Support mirroring VF DMFS rules on both ports") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20210221143559.390277-1-hslester96@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix insufficient distinction between IPv4 and IPv6 addresses
when creating a filter.
IPv4 and IPv6 are kept in the same memory area. If IPv6 is added,
then it's caught by IPv4 check, which leads to err -95.
Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When creating VFs they were sometimes not getting resources.
It was caused by not executing i40e_reset_all_vfs due to
flag __I40E_VF_DISABLE being set on PF. Because of this
IAVF was never able to finish setup sequence never
getting reset indication from PF.
Changed test_and_set_bit __I40E_VF_DISABLE in
i40e_sync_filters_subtask to test_bit and removed clear_bit.
This function should not set this bit it should only check
if it hasn't been already set.
Fixes: a7542b876075 ("i40e: check __I40E_VF_DISABLE bit in i40e_sync_filters_subtask") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
During driver loading flow control settings were written to FW
using a variable which was always zero, since it was being set
only by ethtool. This behavior has been corrected and driver
no longer overwrites the default FW/NVM settings.
Fixes: 373149fc99a0 ("i40e: Decrease the scope of rtnl lock") Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a packet contains an IPv6 header with next header which is
an extension header and not a protocol one, the kernel function
skb_transport_header called with such sk_buff will return a
pointer to the extension header and not to the TCP one.
The above explained call caused a problem with packet processing
for skb with encapsulation for tunnel with I40E_TX_CTX_EXT_IP_IPV6.
The extension header was not skipped at all.
The ipv6_skip_exthdr function does check if next header of the IPV6
header is an extension header and doesn't modify the l4_proto pointer
if it points to a protocol header value so its safe to omit the
comparison of exthdr and l4.hdr pointers. The ipv6_skip_exthdr can
return value -1. This means that the skipping process failed
and there is something wrong with the packet so it will be dropped.
Fixes: a3fd9d8876a5 ("i40e/i40evf: Handle IPv6 extension headers in checksum offload") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
sdw_update_slave_status will be invoked when a codec is attached,
and the codec driver will initialize the codec with regmap functions
while the codec device is pm_runtime suspended.
regmap routines currently rely on regular SoundWire IO functions,
which will call pm_runtime_get_sync()/put_autosuspend.
This causes a deadlock where the resume routine waits for an
initialization complete signal that while the initialization complete
can only be reached when the resume completes.
The only solution if we allow regmap functions to be used in resume
operations as well as during codec initialization is to use _no_pm
routines. The duty of making sure the bus is operational needs to be
handled above the regmap level.
Fixes: 7c22ce6e21840 ('regmap: Add SoundWire bus support') Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210122070634.12825-6-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the case where we need to do an interior node split, and
immediately afterwards, we are unable to allocate a new directory leaf
block due to ENOSPC, the directory index checksum's will not be filled
in correctly (and indeed, will not be correctly journalled).
This looks like a bug that was introduced when we added largedir
support. The original code doesn't make any sense (and should have
been caught in code review), but it was hidden because most of the
time, the index node checksum will be set by do_split(). But if
do_split bails out due to ENOSPC, then ext4_handle_dirty_dx_node()
won't get called, and so the directory index checksum field will not
get set, leading to:
EXT4-fs error (device sdb): dx_probe:858: inode #6635543: block 4022: comm nfsd: Directory index failed checksum
The previous registers were *almost* correct, but instead of
PHYs, they were pointing at DSI PLLs, resulting in the PHY id
autodetection failing miserably.
Fixes: dcefc117cc19 ("drm/msm/dsi: Add support for msm8x94") Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
After 34e3207205ef ("PCI: handle positive error codes"),
pci_user_read_config_*() and pci_user_write_config_*() return 0 or negative
errno values, not PCIBIOS_* values like PCIBIOS_SUCCESSFUL or
PCIBIOS_BAD_REGISTER_NUMBER.
Remove comparisons with PCIBIOS_SUCCESSFUL and check only for non-zero. It
happens that PCIBIOS_SUCCESSFUL is zero, so this is not a functional
change, but it aligns this code with the user accessors.
When the VMCI host support releases guest memory in the case where
the VM was killed, the pinned guest pages aren't locked. Use
set_page_dirty_lock() instead of set_page_dirty().
Testing done: Killed VM while having an active VMCI based vSocket
connection and observed warning from ext4. With this fix, no
warning was observed. Ran various vSocket tests without issues.
If rockchip_pwm_probe() fails to register a PWM device it calls
clk_unprepare() for the device's PWM clock, without having first disabled
the clock and before jumping to an error handler that also unprepares
it. This is likely to produce warnings from the kernel about the clock
being unprepared when it is still enabled, and then being unprepared when
it has already been unprepared.
Prevent these warnings by removing this unnecessary call to
clk_unprepare().
Fixes: 48cf973cae33 ("pwm: rockchip: Avoid glitches on already running PWMs") Signed-off-by: Simon South <simon@simonsouth.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently COMPAT on SPARC64 selects COMPAT_BINFMT_ELF unconditionally,
even when BINFMT_ELF is not enabled. This causes a kconfig warning.
Instead, just select COMPAT_BINFMT_ELF if BINFMT_ELF is enabled.
This builds cleanly with no kconfig warnings.
WARNING: unmet direct dependencies detected for COMPAT_BINFMT_ELF
Depends on [n]: COMPAT [=y] && BINFMT_ELF [=n]
Selected by [y]:
- COMPAT [=y] && SPARC64 [=y]
Fixes: 26b4c912185a ("sparc,sparc64: unify Kconfig files") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ubsan reported the following error. It was because sample's raw
data missed u32 padding at the end. So it broke the alignment of the
array after it.
The raw data contains an u32 size prefix so the data size should have
an u32 padding after 8-byte aligned data.
27: Sample parsing :util/synthetic-events.c:1539:4:
runtime error: store to misaligned address 0x62100006b9bc for type
'__u64' (aka 'unsigned long long'), which requires 8 byte alignment
0x62100006b9bc: note: pointer points here
00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
#0 0x561532a9fc96 in perf_event__synthesize_sample util/synthetic-events.c:1539:13
#1 0x5615327f4a4f in do_test tests/sample-parsing.c:284:8
#2 0x5615327f3f50 in test__sample_parsing tests/sample-parsing.c:381:9
#3 0x56153279d3a1 in run_test tests/builtin-test.c:424:9
#4 0x56153279c836 in test_and_print tests/builtin-test.c:454:9
#5 0x56153279b7eb in __cmd_test tests/builtin-test.c:675:4
#6 0x56153279abf0 in cmd_test tests/builtin-test.c:821:9
#7 0x56153264e796 in run_builtin perf.c:312:11
#8 0x56153264cf03 in handle_internal_command perf.c:364:8
#9 0x56153264e47d in run_argv perf.c:408:2
#10 0x56153264c9a9 in main perf.c:538:3
#11 0x7f137ab6fbbc in __libc_start_main (/lib64/libc.so.6+0x38bbc)
#12 0x561532596828 in _start ...
SUMMARY: UndefinedBehaviorSanitizer: misaligned-pointer-use
util/synthetic-events.c:1539:4 in
Fixes: 045f8cd8542d ("perf tests: Add a sample parsing test") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210214091638.519643-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If v4l2_ctrl_handler_setup() fails then probe() should return an error
code instead of returning success.
Fixes: cee1e3e2ef39 ("media: add video control handlers using V4L2 control framework") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YBKFkbATXa5fA3xj@mwanda Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / linux-stable / log