If a signal callback releases the sw_sync fence, that will trigger a
deadlock as the timeline_fence_release recurses onto the fence->lock
(used both for signaling and the the timeline tree).
To avoid that, temporarily hold an extra reference to the signalled
fences until after we drop the lock.
(This is an alternative implementation of https://patchwork.kernel.org/patch/11664717/
which avoids some potential UAF issues with the original patch.)
v2: Remove now obsolete comment, use list_move_tail() and
list_del_init()
Reported-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Fixes: d3c6dd1fb30d ("dma-buf/sw_sync: Synchronize signal vs syncpt free") Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230818145939.39697-1-robdclark@gmail.com Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The COMMON_CLK config is not enabled in some of the architectures.
This causes below build issues:
pwm-rz-mtu3.c:(.text+0x114):
undefined reference to `clk_rate_exclusive_put'
pwm-rz-mtu3.c:(.text+0x32c):
undefined reference to `clk_rate_exclusive_get'
Fix these issues by moving clk_rate_exclusive_{get,put} inside COMMON_CLK
code block, as clk.c is enabled by COMMON_CLK.
Fixes: 55e9b8b7b806 ("clk: add clk_rate_exclusive api") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/all/202307251752.vLfmmhYm-lkp@intel.com/ Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230725175140.361479-1-biju.das.jz@bp.renesas.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The raid_component_add() function was added to the kernel tree via patch
"[SCSI] embryonic RAID class" (2005). Remove this function since it never
has had any callers in the Linux kernel. And also raid_component_release()
is only used in raid_component_add(), so it is also removed.
Signed-off-by: Zhu Wang <wangzhu9@huawei.com> Link: https://lore.kernel.org/r/20230822015254.184270-1-wangzhu9@huawei.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Fixes: 04b5b5cb0136 ("scsi: core: Fix possible memory leak if device_add() fails") Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 41320b18a0e0 ("scsi: snic: Fix possible memory leak if device_add()
fails") fixed the memory leak caused by dev_set_name() when device_add()
failed. However, it did not consider that 'tgt' has already been released
when put_device(&tgt->dev) is called. Remove kfree(tgt) in the error path
to avoid double free of 'tgt' and move put_device(&tgt->dev) after the
removed kfree(tgt) to avoid a use-after-free.
Fixes: 41320b18a0e0 ("scsi: snic: Fix possible memory leak if device_add() fails") Signed-off-by: Zhu Wang <wangzhu9@huawei.com> Link: https://lore.kernel.org/r/20230819083941.164365-1-wangzhu9@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a GIC local interrupt is not routable, it's vl_map will be used
to control some internal states for core (providing IPTI, IPPCI, IPFDC
input signal for core). Overriding it will interfere core's intetrupt
controller.
Do not touch vl_map if a local interrupt is not routable, we are not
going to remap it.
Before dd098a0e0319 (" irqchip/mips-gic: Get rid of the reliance on
irq_cpu_online()"), if a local interrupt is not routable, then it won't
be requested from GIC Local domain, and thus gic_all_vpes_irq_cpu_online
won't be called for that particular interrupt.
Fixes: dd098a0e0319 (" irqchip/mips-gic: Get rid of the reliance on irq_cpu_online()") Cc: stable@vger.kernel.org Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230424103156.66753-2-jiaxun.yang@flygoat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Negative ifindexes are illegal, but the kernel does not validate the
ifindex in the ancillary header of RTM_NEWLINK messages, resulting in
the kernel generating a warning [1] when such an ifindex is specified.
Removal of the sock_hold got lost when backporting commit c3873070247d
("netfilter: nf_queue: fix possible use-after-free") to 4.19
Fixes: 34dc4a6a7f26 ("netfilter: nf_queue: fix possible use-after-free") in 4.19
Fixed in 4.14 with
https://lore.kernel.org/all/20221024112958.115275475@linuxfoundation.org/
Signed-off-by: Vimal Agrawal <vimal.agrawal@sophos.com> Reviewed-by: Florian Westphal <fw@strlen.de>
[vbrahmajosyula: The fix to the backport was missed in 4.19] Signed-off-by: Vamsi Krishna Brahmajosyula <vbrahmajosyula@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 326587b84078 ("sched: fix goto retry in pick_next_task_rt()")
removed any path which could make pick_next_rt_entity() return NULL.
However, BUG_ON(!rt_se) in _pick_next_task_rt() (the only caller of
pick_next_rt_entity()) still checks the error condition, which can
never happen, since list_entry() never returns NULL.
Remove the BUG_ON check, and instead emit a warning in the only
possible error condition here: the queue being empty which should
never happen.
Fixes: 326587b84078 ("sched: fix goto retry in pick_next_task_rt()") Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Phil Auld <pauld@redhat.com> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20230128-list-entry-null-check-sched-v3-1-b1a71bd1ac6b@diag.uniroma1.it Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Fixes CVE-2023-1077: sched/rt: pick_next_rt_entity(): check list_entry
An insufficient list empty checking in pick_next_rt_entity(). The
_pick_next_task_rt() checks pick_next_rt_entity() returns NULL or not
but pick_next_rt_entity() never returns NULL. So, even if the list is
empty, _pick_next_task_rt() continues its process. ] Signed-off-by: Srish Srinivasan <ssrish@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For a completed request, after the mmc_blk_mq_complete_rq(mq, req)
function is executed, the bitmap_tags corresponding to the
request will be cleared, that is, the request will be regarded as
idle. If the request is acquired by a different type of process at
this time, the issue_type of the request may change. It further
caused the value of mq->in_flight[issue_type] to be abnormal,
and a large number of requests could not be sent.
0-Day found a 34.6% regression in stress-ng's 'af-alg' test case, and
bisected it to commit b81fac906a8f ("x86/fpu: Move FPU initialization into
arch_cpu_finalize_init()"), which optimizes the FPU init order, and moves
the CR4_OSXSAVE enabling into a later place:
As the FPU is not yet initialized the CPU capability setup fails to set
X86_FEATURE_OSXSAVE. Many security module like 'camellia_aesni_avx_x86_64'
depend on this feature and therefore fail to load, causing the regression.
Cure this by setting X86_FEATURE_OSXSAVE feature right after OSXSAVE
enabling.
[ tglx: Moved it into the actual BSP FPU initialization code and added a comment ]
40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary")
changed acpiphp hotplug to use pci_assign_unassigned_bridge_resources()
which depends on bridge being available, however enable_slot() can be
called without bridge associated:
1. Legitimate case of hotplug on root bus (widely used in virt world)
2. A (misbehaving) firmware, that sends ACPI Bus Check notifications to
non existing root ports (Dell Inspiron 7352/0W6WV0), which end up at
enable_slot(..., bridge = 0) where bus has no bridge assigned to it.
acpihp doesn't know that it's a bridge, and bus specific 'PCI
subsystem' can't augment ACPI context with bridge information since
the PCI device to get this data from is/was not available.
Issue is easy to reproduce with QEMU's 'pc' machine, which supports PCI
hotplug on hostbridge slots. To reproduce, boot kernel at commit 40613da52b13 in VM started with following CLI (assuming guest root fs is
installed on sda1 partition):
The issue was discovered on Dell Inspiron 7352/0W6WV0 laptop with following
sequence:
1. Suspend to RAM
2. Wake up with the same backtrace being observed:
3. 2nd suspend to RAM attempt makes laptop freeze
Fix it by using __pci_bus_assign_resources() instead of
pci_assign_unassigned_bridge_resources() as we used to do, but only in case
when bus doesn't have a bridge associated (to cover for the case of ACPI
event on hostbridge or non existing root port).
That lets us keep hotplug on root bus working like it used to and at the
same time keeps resource reassignment usable on root ports (and other 1st
level bridges) that was fixed by 40613da52b13.
Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary") Link: https://lore.kernel.org/r/20230726123518.2361181-2-imammedo@redhat.com Reported-by: Woody Suwalski <terraluna977@gmail.com> Tested-by: Woody Suwalski <terraluna977@gmail.com> Tested-by: Michal Koutný <mkoutny@suse.com> Link: https://lore.kernel.org/r/11fc981c-af49-ce64-6b43-3e282728bd1a@gmail.com Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
variable *nplanes is provided by user via system call argument. The
possible value of q_data->fmt->num_planes is 1-3, while the value
of *nplanes can be 1-8. The array access by index i can cause array
out-of-bounds.
Fix this bug by checking *nplanes against the array size.
The gcc compiler translates on some architectures the 64-bit
__builtin_clzll() function to a call to the libgcc function __clzdi2(),
which should take a 64-bit parameter on 32- and 64-bit platforms.
But in the current kernel code, the built-in __clzdi2() function is
defined to operate (wrongly) on 32-bit parameters if BITS_PER_LONG ==
32, thus the return values on 32-bit kernels are in the range from
[0..31] instead of the expected [0..63] range.
This patch fixes the in-kernel functions __clzdi2() and __ctzdi2() to
take a 64-bit parameter on 32-bit kernels as well, thus it makes the
functions identical for 32- and 64-bit kernels.
This bug went unnoticed since kernel 3.11 for over 10 years, and here
are some possible reasons for that:
a) Some architectures have assembly instructions to count the bits and
which are used instead of calling __clzdi2(), e.g. on x86 the bsr
instruction and on ppc cntlz is used. On such architectures the
wrong __clzdi2() implementation isn't used and as such the bug has
no effect and won't be noticed.
b) Some architectures link to libgcc.a, and the in-kernel weak
functions get replaced by the correct 64-bit variants from libgcc.a.
c) __builtin_clzll() and __clzdi2() doesn't seem to be used in many
places in the kernel, and most likely only in uncritical functions,
e.g. when printing hex values via seq_put_hex_ll(). The wrong return
value will still print the correct number, but just in a wrong
formatting (e.g. with too many leading zeroes).
d) 32-bit kernels aren't used that much any longer, so they are less
tested.
A trivial testcase to verify if the currently running 32-bit kernel is
affected by the bug is to look at the output of /proc/self/maps:
Here the kernel uses a correct implementation of __clzdi2():
When batadv_v_ogm_aggr_send is called for an inactive interface, the skb
is silently dropped by batadv_v_ogm_send_to_if() but never freed causing
the following memory leak:
When a client roamed back to a node before it got time to destroy the
pending local entry (i.e. within the same originator interval) the old
global one is directly removed from hash table and left as such.
But because this entry had an extra reference taken at lookup (i.e using
batadv_tt_global_hash_find) there is no way its memory will be reclaimed
at any time causing the following memory leak:
If received skb in batadv_v_elp_packet_recv or batadv_v_ogm_packet_recv
is either cloned or non linearized then its data buffer will be
reallocated by batadv_check_management_packet when skb_cow or
skb_linearize get called. Thus geting ethernet header address inside
skb data buffer before batadv_check_management_packet had any chance to
reallocate it could lead to the following kernel panic:
If the user set an MTU value, it usually means that there are special
requirements for the MTU. But if an interface gots activated, the MTU was
always recalculated and then the user set value was overwritten.
The only reason why this user set value has to be overwritten, is when the
MTU has to be decreased because batman-adv is not able to transfer packets
with the user specified size.
If an interface changes the MTU, it is expected that an NETDEV_PRECHANGEMTU
and NETDEV_CHANGEMTU notification events is triggered. This worked fine for
.ndo_change_mtu based changes because core networking code took care of it.
But for auto-adjustments after hard-interfaces changes, these events were
simply missing.
Due to this problem, non-batman-adv components weren't aware of MTU changes
and thus couldn't perform their own tasks correctly.
We have some reports of linux NFS clients that cannot satisfy a linux knfsd
server that always sets SEQ4_STATUS_RECALLABLE_STATE_REVOKED even though
those clients repeatedly walk all their known state using TEST_STATEID and
receive NFS4_OK for all.
Its possible for revoke_delegation() to set NFS4_REVOKED_DELEG_STID, then
nfsd4_free_stateid() finds the delegation and returns NFS4_OK to
FREE_STATEID. Afterward, revoke_delegation() moves the same delegation to
cl_revoked. This would produce the observed client/server effect.
Fix this by ensuring that the setting of sc_type to NFS4_REVOKED_DELEG_STID
and move to cl_revoked happens within the same cl_lock. This will allow
nfsd4_free_stateid() to properly remove the delegation from cl_revoked.
When building for power4, newer binutils don't recognise the "dcbfl"
extended mnemonic.
dcbfl RA, RB is equivalent to dcbf RA, RB, 1.
Switch to "dcbf" to avoid the build error.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ipvs module parse the user buffer and save it to sysctl,
then check if the value is valid. invalid value occurs
over a period of time.
Here, I add a variable, struct ctl_table tmp, used to read
the value from the user buffer, and save only when it is valid.
I delete proc_do_sync_mode and use extra1/2 in table for the
proc_dointvec_minmax call.
Fixes: f73181c8288f ("ipvs: add support for sync threads") Signed-off-by: Junwei Hu <hujunwei4@huawei.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[Julian: Backport by changing SYSCTL_ZERO/SYSCTL_ONE to zero/one] Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode
bonds") aims to enable the use of macvlans on top of rlb bond mode. However,
the current rlb bond mode only handles ARP packets to update remote neighbor
entries. This causes an issue when a macvlan is on top of the bond, and
remote devices send packets to the macvlan using the bond's MAC address
as the destination. After delivering the packets to the macvlan, the macvlan
will rejects them as the MAC address is incorrect. Consequently, this commit
makes macvlan over bond non-functional.
To address this problem, one potential solution is to check for the presence
of a macvlan port on the bond device using netif_is_macvlan_port(bond->dev)
and return NULL in the rlb_arp_xmit() function. However, this approach
doesn't fully resolve the situation when a VLAN exists between the bond and
macvlan.
So let's just do a partial revert for commit 14af9963ba1e in rlb_arp_xmit().
As the comment said, Don't modify or load balance ARPs that do not originate
locally.
Fixes: 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds") Reported-by: susan.zheng@veritas.com Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2117816 Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: e74216b8def3 ("bonding: fix macvlan over alb bond support") Signed-off-by: Sasha Levin <sashal@kernel.org>
When replacing an existing root qdisc, with one that is of the same kind, the
request boils down to essentially a parameterization change i.e not one that
requires allocation and grafting of a new qdisc. syzbot was able to create a
scenario which resulted in a taprio qdisc replacing an existing taprio qdisc
with a combination of NLM_F_CREATE, NLM_F_REPLACE and NLM_F_EXCL leading to
create and graft scenario.
The fix ensures that only when the qdisc kinds are different that we should
allow a create and graft, otherwise it goes into the "change" codepath.
While at it, fix the code and comments to improve readability.
While syzbot was able to create the issue, it did not zone on the root cause.
Analysis from Vladimir Oltean <vladimir.oltean@nxp.com> helped narrow it down.
v1->V2 changes:
- remove "inline" function definition (Vladmir)
- remove extrenous braces in branches (Vladmir)
- change inline function names (Pedro)
- Run tdc tests (Victor)
v2->v3 changes:
- dont break else/if (Simon)
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+a3618a167af2021433cd@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/20230816225759.g25x76kmgzya2gei@skbuf/T/ Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Victor Nogueira <victor@mojatatu.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
__tracing_open() { // 1. File 'trace' is being opened;
...
*iter->trace = *tr->current_trace; // 2. Tracer 'function_graph' is
// currently set;
...
iter->trace->open(iter); // 3. Call graph_trace_open() here,
// and memory are allocated in it;
...
}
s_start() { // 4. The opened file is being read;
...
*iter->trace = *tr->current_trace; // 5. If tracer is switched to
// 'nop' or others, then memory
// in step 3 are leaked!!!
...
}
To fix it, in s_start(), close tracer before switching then reopen the
new tracer after switching. And some tracers like 'wakeup' may not update
'iter->private' in some cases when reopen, then it should be cleared
to avoid being mistakenly closed again.
[Why & How]
If there is no TG allocation we can dereference a NULL pointer when
checking if the TG is enabled.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Taimur Hassan <syed.hassan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
When booting, the driver waits for the MPC idle bit to be set as part of
pipe initialization. However, on some systems this occurs before OTG is
enabled, and since the MPC idle bit won't be set until the vupdate
signal occurs (which requires OTG to be enabled), this never happens and
the wait times out. This can add hundreds of milliseconds to the boot
time.
[How]
Do not wait for mpc idle if tg is disabled
Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 5a25cefc0920 ("drm/amd/display: check TG is non-null before checking if enabled") Signed-off-by: Sasha Levin <sashal@kernel.org>
The SMBus I2C buses have limits on the size of transfers they can do but
do not factor in the register length meaning we may try to do a transfer
longer than our length limit, the core will not take care of this.
Future changes will factor this out into the core but there are a number
of users that assume current behaviour so let's just do something
conservative here.
This does not take account padding bits but practically speaking these
are very rarely if ever used on I2C buses given that they generally run
slowly enough to mean there's no issue.
It was reported that dm-integrity runs out of vmalloc space on 32-bit
architectures. On x86, there is only 128MiB vmalloc space and dm-integrity
consumes it quickly because it has a 64MiB journal and 8MiB recalculate
buffer.
Fix this by reducing the size of the journal to 4MiB and the size of
the recalculate buffer to 1MiB, so that multiple dm-integrity devices
can be created and activated on 32-bit architectures.
binutils v2.37 drops unused section symbols, which prevents recordmcount
from capturing mcount locations in sections that have no non-weak
symbols. This results in a build failure with a message such as:
Cannot find symbol for section 12: .text.perf_callchain_kernel.
kernel/events/callchain.o: failed
The change to binutils was reverted for v2.38, so this behavior is
specific to binutils v2.37:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=c09c8b42021180eee9495bd50d8b35e683d3901b
Objtool is able to cope with such sections, so this issue is specific to
recordmcount.
Fail the build and print a warning if binutils v2.37 is detected and if
we are using recordmcount.
Cc: stable@vger.kernel.org Suggested-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230530061436.56925-1-naveen@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
This functionality was tentatively added in the past
(commit 6533b7c16ee5 ("powerpc: Initial stack protector
(-fstack-protector) support")) but had to be reverted
(commit f2574030b0e3 ("powerpc: Revert the initial stack
protector support") because of GCC implementing it differently
whether it had been built with libc support or not.
Now, GCC offers the possibility to manually set the
stack-protector mode (global or tls) regardless of libc support.
This time, the patch selects HAVE_STACKPROTECTOR only if
-mstack-protector-guard=tls is supported by GCC.
On PPC32, as register r2 points to current task_struct at
all time, the stack_canary located inside task_struct can be
used directly by using the following GCC options:
-mstack-protector-guard=tls
-mstack-protector-guard-reg=r2
-mstack-protector-guard-offset=offsetof(struct task_struct, stack_canary))
The protector is disabled for prom_init and bootx_init as
it is too early to handle it properly.
There is a potential OOB read at fast_imageblit, for
"colortab[(*src >> 4)]" can become a negative value due to
"const char *s = image->data, *src".
This change makes sure the index for colortab always positive
or zero.
Similar commit:
https://patchwork.kernel.org/patch/11746067
Commit 6f29e04938bf ("fbdev: Improve performance of sys_imageblit()")
broke sys_imageblit() for image width that are not aligned to 8-bit
boundaries. Fix this by handling the trailing pixels on each line
separately. The performance improvements in the original commit do not
regress by this change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 6f29e04938bf ("fbdev: Improve performance of sys_imageblit()") Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220313192952.12058-2-tzimmermann@suse.de
Stable-dep-of: c2d22806aecb ("fbdev: fix potential OOB read in fast_imageblit()") Signed-off-by: Sasha Levin <sashal@kernel.org>
Improve the performance of sys_imageblit() by manually unrolling
the inner blitting loop and moving some invariants out. The compiler
failed to do this automatically. The resulting binary code was even
slower than the cfb_imageblit() helper, which uses the same algorithm,
but operates on I/O memory.
A microbenchmark measures the average number of CPU cycles
for sys_imageblit() after a stabilizing period of a few minutes
(i7-4790, FullHD, simpledrm, kernel with debugging). The value
for CFB is given as a reference.
Revert commit b4b844930f27 ("tty: serial: fsl_lpuart: drop earlycon entry
for i.MX8QXP"), because this breaks earlycon support on imx8qm/imx8qxp.
While it is true that for earlycon there is no difference between
i.MX8QXP and i.MX7ULP (for now at least), there are differences
regarding clocks and fixups for wakeup support. For that reason it was
deemed unacceptable to add the imx7ulp compatible to device tree in
order to get earlycon working again.
Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20211124073109.805088-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: e0edfdc15863 ("tty: serial: fsl_lpuart: add earlycon for imx8ulp platform") Signed-off-by: Sasha Levin <sashal@kernel.org>
cpu_has_octeon_cache was tied to 0 for generic cpu-features,
whith this generic kernel built for octeon CPU won't boot.
Just enable this flag by cpu_type. It won't hurt orther platforms
because compiler will eliminate the code path on other processors.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Stable-dep-of: 5487a7b60695 ("MIPS: cpu-features: Use boot_cpu_type for CPU type based features") Signed-off-by: Sasha Levin <sashal@kernel.org>
When a waiting plock request (F_SETLKW) is sent to userspace
for processing (dlm_controld), the result is returned at a
later time. That result could be incorrectly matched to a
different waiting request in cases where the owner field is
the same (e.g. different threads in a process.) This is fixed
by comparing all the properties in the request and reply.
The results for non-waiting plock requests are now matched
based on list order because the results are returned in the
same order they were sent.
Cc: stable@vger.kernel.org Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch reverses the commit bcfad4265ced ("dlm: improve plock logging
if interrupted") by moving it to debug level and notifying the user an op
was removed.
Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
Stable-dep-of: 57e2c2f2d94c ("fs: dlm: fix mismatch of plock results from userspace") Signed-off-by: Sasha Levin <sashal@kernel.org>
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean [1].
This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.
This patch changes the log level if a plock is removed when interrupted
from debug to info. Additional it signals now that the plock entity was
removed to let the user know what's happening.
If on a dev_write() a pending plock cannot be find it will signal that
it might have been removed because wait interruption.
Before this patch there might be a "dev_write no op ..." info message
and the users can only guess that the plock was removed before because
the wait interruption. To be sure that is the case we log both messages
on the same log level.
Let both message be logged on info layer because it should not happened
a lot and if it happens it should be clear why the op was not found.
Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
Stable-dep-of: 57e2c2f2d94c ("fs: dlm: fix mismatch of plock results from userspace") Signed-off-by: Sasha Levin <sashal@kernel.org>
wait till linux guest boots, then hotplug device:
(qemu) device_add qxl,bus=rp1
hotplug on guest side fails with:
pci 0000:01:00.0: [1b36:0100] type 00 class 0x038000
pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x03ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0x00000000-0x03ffffff]
pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00001fff]
pci 0000:01:00.0: reg 0x1c: [io 0x0000-0x001f]
pci 0000:01:00.0: BAR 0: no space for [mem size 0x04000000]
pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x04000000]
pci 0000:01:00.0: BAR 1: no space for [mem size 0x04000000]
pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x04000000]
pci 0000:01:00.0: BAR 2: assigned [mem 0xfe800000-0xfe801fff]
pci 0000:01:00.0: BAR 3: assigned [io 0x1000-0x101f]
qxl 0000:01:00.0: enabling device (0000 -> 0003)
Unable to create vram_mapping
qxl: probe of 0000:01:00.0 failed with error -12
However when using native PCIe hotplug
'-global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off'
it works fine, since kernel attempts to reassign unused resources.
Use the same machinery as native PCIe hotplug to (re)assign resources.
Link: https://lore.kernel.org/r/20230424191557.2464760-1-imammedo@redhat.com Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
The 54810 does not support c45. The mmd_phy_indirect accesses return
arbirtary values leading to odd behavior like saying it supports EEE
when it doesn't. We also see that reading/writing these non-existent
MMD registers leads to phy instability in some cases.
According to all consumers code of attrs[XFRMA_SEC_CTX], like
* verify_sec_ctx_len(), convert to xfrm_user_sec_ctx*
* xfrm_state_construct(), call security_xfrm_state_alloc whose prototype
is int security_xfrm_state_alloc(.., struct xfrm_user_sec_ctx *sec_ctx);
* copy_from_user_sec_ctx(), convert to xfrm_user_sec_ctx *
...
It seems that the expected parsing result for XFRMA_SEC_CTX should be
structure xfrm_user_sec_ctx, and the current xfrm_sec_ctx is confusing
and misleading (Luckily, they happen to have same size 8 bytes).
This commit amend the policy structure to xfrm_user_sec_ctx to avoid
ambiguity.
Fixes: cf5cb79f6946 ("[XFRM] netlink: Establish an attribute policy") Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the real workload, I encountered an issue which could cause the RTO
timer to retransmit the skb per 1ms with linear option enabled. The amount
of lost-retransmitted skbs can go up to 1000+ instantly.
The root cause is that if the icsk_rto happens to be zero in the 6th round
(which is the TCP_THIN_LINEAR_RETRIES value), then it will always be zero
due to the changed calculation method in tcp_retransmit_timer() as follows:
Above line could be converted to
icsk->icsk_rto = min(0 << 1, TCP_RTO_MAX) = 0
Therefore, the timer expires so quickly without any doubt.
I read through the RFC 6298 and found that the RTO value can be rounded
up to a certain value, in Linux, say TCP_RTO_MIN as default, which is
regarded as the lower bound in this patch as suggested by Eric.
Fixes: 36e31b0af587 ("net: TCP thin linear timeouts") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 25266128fe16 ("virtio-net: fix race between set queues and
probe") tries to fix the race between set queues and probe by calling
_virtnet_set_queues() before DRIVER_OK is set. This violates virtio
spec. Fixing this by setting queues after virtio_device_ready().
Note that rtnl needs to be held for userspace requests to change the
number of queues. So we are serialized in this way.
Fixes: 25266128fe16 ("virtio-net: fix race between set queues and probe") Reported-by: Dragos Tatulea <dtatulea@nvidia.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
af_unix: Fix null-ptr-deref in unix_stream_sendpage().
Bing-Jhong Billy Jheng reported null-ptr-deref in unix_stream_sendpage()
with detailed analysis and a nice repro.
unix_stream_sendpage() tries to add data to the last skb in the peer's
recv queue without locking the queue.
If the peer's FD is passed to another socket and the socket's FD is
passed to the peer, there is a loop between them. If we close both
sockets without receiving FD, the sockets will be cleaned up by garbage
collection.
The garbage collection iterates such sockets and unlinks skb with
FD from the socket's receive queue under the queue's lock.
So, there is a race where unix_stream_sendpage() could access an skb
locklessly that is being released by garbage collection, resulting in
use-after-free.
To avoid the issue, unix_stream_sendpage() must lock the peer's recv
queue.
Note the issue does not exist in 6.5+ thanks to the recent sendpage()
refactoring.
This patch is originally written by Linus Torvalds.
In SCTP protocol, it is using the same timer (T2 timer) for SHUTDOWN and
SHUTDOWN_ACK retransmission. However in sctp conntrack the default timeout
value for SCTP_CONNTRACK_SHUTDOWN_ACK_SENT state is 3 secs while it's 300
msecs for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV state.
As Paolo Valerio noticed, this might cause unwanted expiration of the ct
entry. In my test, with 1s tc netem delay set on the NAT path, after the
SHUTDOWN is sent, the sctp ct entry enters SCTP_CONNTRACK_SHUTDOWN_SEND
state. However, due to 300ms (too short) delay, when the SHUTDOWN_ACK is
sent back from the peer, the sctp ct entry has expired and been deleted,
and then the SHUTDOWN_ACK has to be dropped.
Also, it is confusing these two sysctl options always show 0 due to all
timeout values using sec as unit:
This patch fixes it by also using 3 secs for sctp shutdown send and recv
state in sctp conntrack, which is also RTO.initial value in SCTP protocol.
Note that the very short time value for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV
was probably used for a rare scenario where SHUTDOWN is sent on 1st path
but SHUTDOWN_ACK is replied on 2nd path, then a new connection started
immediately on 1st path. So this patch also moves from SHUTDOWN_SEND/RECV
to CLOSE when receiving INIT in the ORIGINAL direction.
Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.") Reported-by: Paolo Valerio <pvalerio@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function test_dev_config_update_u8() is called from both the locked
and the unlocked context, function config_num_requests_store() and
config_read_fw_idx_store() which can both be called asynchronously as
they are driver's methods, while test_dev_config_update_u8() and siblings
change their argument pointed to by u8 *cfg or similar pointer.
To avoid deadlock on test_fw_mutex, the lock is dropped before calling
test_dev_config_update_u8() and re-acquired within test_dev_config_update_u8()
itself, but alas this creates a race condition.
Having two locks wouldn't assure a race-proof mutual exclusion.
This situation is best avoided by the introduction of a new, unlocked
function __test_dev_config_update_u8() which can be called from the locked
context and reducing test_dev_config_update_u8() to:
static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg)
{
int ret;
mutex_lock(&test_fw_mutex);
ret = __test_dev_config_update_u8(buf, size, cfg);
mutex_unlock(&test_fw_mutex);
return ret;
}
doing the locking and calling the unlocked primitive, which enables both
locked and unlocked versions without duplication of code.
The similar approach was applied to all functions called from the locked
and the unlocked context, which safely mitigates both deadlocks and race
conditions in the driver.
__test_dev_config_update_bool(), __test_dev_config_update_u8() and
__test_dev_config_update_size_t() unlocked versions of the functions
were introduced to be called from the locked contexts as a workaround
without releasing the main driver's lock and thereof causing a race
condition.
The test_dev_config_update_bool(), test_dev_config_update_u8() and
test_dev_config_update_size_t() locked versions of the functions
are being called from driver methods without the unnecessary multiplying
of the locking and unlocking code for each method, and complicating
the code with saving of the return value across lock.
Fixes: 7feebfa487b92 ("test_firmware: add support for request_firmware_into_buf") Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russ Weight <russell.h.weight@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Tianfei Zhang <tianfei.zhang@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-kselftest@vger.kernel.org Cc: stable@vger.kernel.org # v5.4 Suggested-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Link: https://lore.kernel.org/r/20230509084746.48259-1-mirsad.todorovac@alu.unizg.hr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Under the current code, when cifs_readpage_worker is called, the call
contract is that the callee should unlock the page. This is documented
in the read_folio section of Documentation/filesystems/vfs.rst as:
> The filesystem should unlock the folio once the read has completed,
> whether it was successful or not.
Without this change, when fscache is in use and cache hit occurs during
a read, the page lock is leaked, producing the following stack on
subsequent reads (via mmap) to the page:
This requires a reboot to resolve; it is a deadlock.
Note however that the call to cifs_readpage_from_fscache does mark the
page clean, but does not free the folio lock. This happens in
__cifs_readpage_from_fscache on success. Releasing the lock at that
point however is not appropriate as cifs_readahead also calls
cifs_readpage_from_fscache and *does* unconditionally release the lock
after its return. This change therefore effectively makes
cifs_readpage_worker work like cifs_readahead.
Signed-off-by: Russell Harmon <russ@har.mn> Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Reviewed-by: David Howells <dhowells@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unloading a hardware specific 8250 driver can produce error "Unable to
handle kernel paging request at virtual address" about ten seconds after
unloading the driver. This happens on uart_hangup() calling
uart_change_pm().
Turns out commit 04e82793f068 ("serial: 8250: Reinit port->pm on port
specific driver unbind") was only a partial fix. If the hardware specific
driver has initialized port->pm function, we need to clear port->pm too.
Just reinitializing port->ops does not do this. Otherwise serial8250_pm()
will call port->pm() instead of serial8250_do_pm().
Fixes: 04e82793f068 ("serial: 8250: Reinit port->pm on port specific driver unbind") Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230804131553.52927-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the tdm lane mask is computed, the driver currently fills the 1st lane
before moving on to the next. If the stream has less channels than the
lanes can accommodate, slots will be disabled on the last lanes.
Unfortunately, the HW distribute channels in a different way. It distribute
channels in pair on each lanes before moving on the next slots.
This difference leads to problems if a device has an interface with more
than 1 lane and with more than 2 slots per lane.
For example: a playback interface with 2 lanes and 4 slots each (total 8
slots - zero based numbering)
- Playing a 8ch stream:
- All slots activated by the driver
- channel #2 will be played on lane #1 - slot #0 following HW placement
- Playing a 4ch stream:
- Lane #1 disabled by the driver
- channel #2 will be played on lane #0 - slot #2
This behaviour is obviously not desirable.
Change the way slots are activated on the TDM lanes to follow what the HW
does and make sure each channel always get mapped to the same slot/lane.
Fixes: 1a11d88f499c ("ASoC: meson: add tdm formatter base driver") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20230809171931.1244502-1-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: 3953c46c3ac7 ("sk_buff: allow segmenting based on frag sizes") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Xin Long <lucien.xin@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20230816142158.1779798-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
So the conditions of leaving global pressure are inconstant, which
may lead to the situation that one pressured net-memcg prevents the
global pressure from being cleared when there is indeed no global
pressure, thus the global constrains are still in effect unexpectedly
on the other sockets.
This patch fixes this by ignoring the net-memcg's pressure when
deciding whether should leave global memory pressure.
Similar to commit 01f4fd270870 ("bonding: Fix incorrect deletion of
ETH_P_8021AD protocol vid from slaves"), we can trigger BUG_ON(!vlan_info)
in unregister_vlan_dev() with the following testcase:
# ip netns add ns1
# ip netns exec ns1 ip link add team1 type team
# ip netns exec ns1 ip link add team_slave type veth peer veth2
# ip netns exec ns1 ip link set team_slave master team1
# ip netns exec ns1 ip link add link team_slave name team_slave.10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link add link team1 name team1.10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link set team_slave nomaster
# ip netns del ns1
Add S-VLAN tag related features support to team driver. So the team driver
will always propagate the VLAN info to its slaves.
Fixes: 8ad227ff89a7 ("net: vlan: add 802.1ad support") Suggested-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230814032301.2804971-1-william.xuanziyang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This test verifies whether the encapsulated packets have the correct
configured TTL. It does so by sending ICMP packets through the test
topology and mirroring them to a gretap netdevice. On a busy host
however, more than just the test ICMP packets may end up flowing
through the topology, get mirrored, and counted. This leads to
potential spurious failures as the test observes much more mirrored
packets than the sent test packets, and assumes a bug.
Fix this by tightening up the mirror action match. Change it from
matchall to a flower classifier matching on ICMP packets specifically.
Fixes: 45315673e0c5 ("selftests: forwarding: Test changes in mirror-to-gretap") Signed-off-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Normally, x->replay_esn and x->preplay_esn should be allocated at
xfrm_alloc_replay_state_esn(...) in xfrm_state_construct(...), hence the
xfrm_update_ae_params(...) is okay to update them. However, the current
implementation of xfrm_new_ae(...) allows a malicious user to directly
dereference a NULL pointer and crash the kernel like below.
This Null-ptr-deref bug is assigned CVE-2023-3772. And this commit
adds additional NULL check in xfrm_update_ae_params to fix the NPD.
Fixes: d8647b79c3b7 ("xfrm: Add user interface for esn and big anti-replay windows") Signed-off-by: Lin Ma <linma@zju.edu.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When ip_vti device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when ip_vti device sends IPv6 packets.
As commit f855691975bb ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.
When ipv6_vti device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when ipv6_vti device sends IPv6 packets.
The stack information is as follows:
BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890
Read of size 1 at addr ffff88802e08edc2 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-next-20230707-00001-g84e2cad7f979 #410
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xd9/0x150
print_address_description.constprop.0+0x2c/0x3c0
kasan_report+0x11d/0x130
decode_session6+0x103f/0x1890
__xfrm_decode_session+0x54/0xb0
vti6_tnl_xmit+0x3e6/0x1ee0
dev_hard_start_xmit+0x187/0x700
sch_direct_xmit+0x1a3/0xc30
__qdisc_run+0x510/0x17a0
__dev_queue_xmit+0x2215/0x3b10
neigh_connected_output+0x3c2/0x550
ip6_finish_output2+0x55a/0x1550
ip6_finish_output+0x6b9/0x1270
ip6_output+0x1f1/0x540
ndisc_send_skb+0xa63/0x1890
ndisc_send_rs+0x132/0x6f0
addrconf_rs_timer+0x3f1/0x870
call_timer_fn+0x1a0/0x580
expire_timers+0x29b/0x4b0
run_timer_softirq+0x326/0x910
__do_softirq+0x1d4/0x905
irq_exit_rcu+0xb7/0x120
sysvec_apic_timer_interrupt+0x97/0xc0
</IRQ>
Allocated by task 9176:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
__kasan_slab_alloc+0x7f/0x90
kmem_cache_alloc_node+0x1cd/0x410
kmalloc_reserve+0x165/0x270
__alloc_skb+0x129/0x330
netlink_sendmsg+0x9b1/0xe30
sock_sendmsg+0xde/0x190
____sys_sendmsg+0x739/0x920
___sys_sendmsg+0x110/0x1b0
__sys_sendmsg+0xf7/0x1c0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 9176:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
kasan_save_free_info+0x2b/0x40
____kasan_slab_free+0x160/0x1c0
slab_free_freelist_hook+0x11b/0x220
kmem_cache_free+0xf0/0x490
skb_free_head+0x17f/0x1b0
skb_release_data+0x59c/0x850
consume_skb+0xd2/0x170
netlink_unicast+0x54f/0x7f0
netlink_sendmsg+0x926/0xe30
sock_sendmsg+0xde/0x190
____sys_sendmsg+0x739/0x920
___sys_sendmsg+0x110/0x1b0
__sys_sendmsg+0xf7/0x1c0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The buggy address belongs to the object at ffff88802e08ed00
which belongs to the cache skbuff_small_head of size 640
The buggy address is located 194 bytes inside of
freed 640-byte region [ffff88802e08ed00, ffff88802e08ef80)
As commit f855691975bb ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.
When the xfrm device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when the xfrm device sends IPv6 packets.
The stack information is as follows:
BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890
Read of size 1 at addr ffff8881111458ef by task swapper/3/0
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.4.0-next-20230707 #409
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xd9/0x150
print_address_description.constprop.0+0x2c/0x3c0
kasan_report+0x11d/0x130
decode_session6+0x103f/0x1890
__xfrm_decode_session+0x54/0xb0
xfrmi_xmit+0x173/0x1ca0
dev_hard_start_xmit+0x187/0x700
sch_direct_xmit+0x1a3/0xc30
__qdisc_run+0x510/0x17a0
__dev_queue_xmit+0x2215/0x3b10
neigh_connected_output+0x3c2/0x550
ip6_finish_output2+0x55a/0x1550
ip6_finish_output+0x6b9/0x1270
ip6_output+0x1f1/0x540
ndisc_send_skb+0xa63/0x1890
ndisc_send_rs+0x132/0x6f0
addrconf_rs_timer+0x3f1/0x870
call_timer_fn+0x1a0/0x580
expire_timers+0x29b/0x4b0
run_timer_softirq+0x326/0x910
__do_softirq+0x1d4/0x905
irq_exit_rcu+0xb7/0x120
sysvec_apic_timer_interrupt+0x97/0xc0
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:intel_idle_hlt+0x23/0x30
Code: 1f 84 00 00 00 00 00 f3 0f 1e fa 41 54 41 89 d4 0f 1f 44 00 00 66 90 0f 1f 44 00 00 0f 00 2d c4 9f ab 00 0f 1f 44 00 00 fb f4 <fa> 44 89 e0 41 5c c3 66 0f 1f 44 00 00 f3 0f 1e fa 41 54 41 89 d4
RSP: 0018:ffffc90000197d78 EFLAGS: 00000246
RAX: 00000000000a83c3 RBX: ffffe8ffffd09c50 RCX: ffffffff8a22d8e5
RDX: 0000000000000001 RSI: ffffffff8d3f8080 RDI: ffffe8ffffd09c50
RBP: ffffffff8d3f8080 R08: 0000000000000001 R09: ffffed1026ba6d9d
R10: ffff888135d36ceb R11: 0000000000000001 R12: 0000000000000001
R13: ffffffff8d3f8100 R14: 0000000000000001 R15: 0000000000000000
cpuidle_enter_state+0xd3/0x6f0
cpuidle_enter+0x4e/0xa0
do_idle+0x2fe/0x3c0
cpu_startup_entry+0x18/0x20
start_secondary+0x200/0x290
secondary_startup_64_no_verify+0x167/0x16b
</TASK>
Allocated by task 939:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
__kasan_slab_alloc+0x7f/0x90
kmem_cache_alloc_node+0x1cd/0x410
kmalloc_reserve+0x165/0x270
__alloc_skb+0x129/0x330
inet6_ifa_notify+0x118/0x230
__ipv6_ifa_notify+0x177/0xbe0
addrconf_dad_completed+0x133/0xe00
addrconf_dad_work+0x764/0x1390
process_one_work+0xa32/0x16f0
worker_thread+0x67d/0x10c0
kthread+0x344/0x440
ret_from_fork+0x1f/0x30
The buggy address belongs to the object at ffff888111145800
which belongs to the cache skbuff_small_head of size 640
The buggy address is located 239 bytes inside of
freed 640-byte region [ffff888111145800, ffff888111145a80)
As commit f855691975bb ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.
When running xfrm_state_walk_init(), the xfrm_address_filter being used
is okay to have a splen/dplen that equals to sizeof(xfrm_address_t)<<3.
This commit replaces >= to > to make sure the boundary checking is
correct.
Fixes: 37bd22420f85 ("af_key: pfkey_dump needs parameter validation") Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ 44.211730] ==================================================================
[ 44.212045] BUG: KASAN: slab-out-of-bounds in memcmp+0x8b/0xb0
[ 44.212045] Read of size 8 at addr ffff88800870f320 by task poc.xfrm/97
[ 44.212045]
[ 44.212045] CPU: 0 PID: 97 Comm: poc.xfrm Not tainted 6.4.0-rc7-00072-gdad9774deaf1-dirty #4
[ 44.212045] Call Trace:
[ 44.212045] <TASK>
[ 44.212045] dump_stack_lvl+0x37/0x50
[ 44.212045] print_report+0xcc/0x620
[ 44.212045] ? __virt_addr_valid+0xf3/0x170
[ 44.212045] ? memcmp+0x8b/0xb0
[ 44.212045] kasan_report+0xb2/0xe0
[ 44.212045] ? memcmp+0x8b/0xb0
[ 44.212045] kasan_check_range+0x39/0x1c0
[ 44.212045] memcmp+0x8b/0xb0
[ 44.212045] xfrm_state_walk+0x21c/0x420
[ 44.212045] ? __pfx_dump_one_state+0x10/0x10
[ 44.212045] xfrm_dump_sa+0x1e2/0x290
[ 44.212045] ? __pfx_xfrm_dump_sa+0x10/0x10
[ 44.212045] ? __kernel_text_address+0xd/0x40
[ 44.212045] ? kasan_unpoison+0x27/0x60
[ 44.212045] ? mutex_lock+0x60/0xe0
[ 44.212045] ? __pfx_mutex_lock+0x10/0x10
[ 44.212045] ? kasan_save_stack+0x22/0x50
[ 44.212045] netlink_dump+0x322/0x6c0
[ 44.212045] ? __pfx_netlink_dump+0x10/0x10
[ 44.212045] ? mutex_unlock+0x7f/0xd0
[ 44.212045] ? __pfx_mutex_unlock+0x10/0x10
[ 44.212045] __netlink_dump_start+0x353/0x430
[ 44.212045] xfrm_user_rcv_msg+0x3a4/0x410
[ 44.212045] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 44.212045] ? __pfx_xfrm_user_rcv_msg+0x10/0x10
[ 44.212045] ? __pfx_xfrm_dump_sa+0x10/0x10
[ 44.212045] ? __pfx_xfrm_dump_sa_done+0x10/0x10
[ 44.212045] ? __stack_depot_save+0x382/0x4e0
[ 44.212045] ? filter_irq_stacks+0x1c/0x70
[ 44.212045] ? kasan_save_stack+0x32/0x50
[ 44.212045] ? kasan_save_stack+0x22/0x50
[ 44.212045] ? kasan_set_track+0x25/0x30
[ 44.212045] ? __kasan_slab_alloc+0x59/0x70
[ 44.212045] ? kmem_cache_alloc_node+0xf7/0x260
[ 44.212045] ? kmalloc_reserve+0xab/0x120
[ 44.212045] ? __alloc_skb+0xcf/0x210
[ 44.212045] ? netlink_sendmsg+0x509/0x700
[ 44.212045] ? sock_sendmsg+0xde/0xe0
[ 44.212045] ? __sys_sendto+0x18d/0x230
[ 44.212045] ? __x64_sys_sendto+0x71/0x90
[ 44.212045] ? do_syscall_64+0x3f/0x90
[ 44.212045] ? entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 44.212045] ? netlink_sendmsg+0x509/0x700
[ 44.212045] ? sock_sendmsg+0xde/0xe0
[ 44.212045] ? __sys_sendto+0x18d/0x230
[ 44.212045] ? __x64_sys_sendto+0x71/0x90
[ 44.212045] ? do_syscall_64+0x3f/0x90
[ 44.212045] ? entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 44.212045] ? kasan_save_stack+0x22/0x50
[ 44.212045] ? kasan_set_track+0x25/0x30
[ 44.212045] ? kasan_save_free_info+0x2e/0x50
[ 44.212045] ? __kasan_slab_free+0x10a/0x190
[ 44.212045] ? kmem_cache_free+0x9c/0x340
[ 44.212045] ? netlink_recvmsg+0x23c/0x660
[ 44.212045] ? sock_recvmsg+0xeb/0xf0
[ 44.212045] ? __sys_recvfrom+0x13c/0x1f0
[ 44.212045] ? __x64_sys_recvfrom+0x71/0x90
[ 44.212045] ? do_syscall_64+0x3f/0x90
[ 44.212045] ? entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 44.212045] ? copyout+0x3e/0x50
[ 44.212045] netlink_rcv_skb+0xd6/0x210
[ 44.212045] ? __pfx_xfrm_user_rcv_msg+0x10/0x10
[ 44.212045] ? __pfx_netlink_rcv_skb+0x10/0x10
[ 44.212045] ? __pfx_sock_has_perm+0x10/0x10
[ 44.212045] ? mutex_lock+0x8d/0xe0
[ 44.212045] ? __pfx_mutex_lock+0x10/0x10
[ 44.212045] xfrm_netlink_rcv+0x44/0x50
[ 44.212045] netlink_unicast+0x36f/0x4c0
[ 44.212045] ? __pfx_netlink_unicast+0x10/0x10
[ 44.212045] ? netlink_recvmsg+0x500/0x660
[ 44.212045] netlink_sendmsg+0x3b7/0x700
[ 44.212045] ? __pfx_netlink_sendmsg+0x10/0x10
[ 44.212045] ? __pfx_netlink_sendmsg+0x10/0x10
[ 44.212045] sock_sendmsg+0xde/0xe0
[ 44.212045] __sys_sendto+0x18d/0x230
[ 44.212045] ? __pfx___sys_sendto+0x10/0x10
[ 44.212045] ? rcu_core+0x44a/0xe10
[ 44.212045] ? __rseq_handle_notify_resume+0x45b/0x740
[ 44.212045] ? _raw_spin_lock_irq+0x81/0xe0
[ 44.212045] ? __pfx___rseq_handle_notify_resume+0x10/0x10
[ 44.212045] ? __pfx_restore_fpregs_from_fpstate+0x10/0x10
[ 44.212045] ? __pfx_blkcg_maybe_throttle_current+0x10/0x10
[ 44.212045] ? __pfx_task_work_run+0x10/0x10
[ 44.212045] __x64_sys_sendto+0x71/0x90
[ 44.212045] do_syscall_64+0x3f/0x90
[ 44.212045] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 44.212045] RIP: 0033:0x44b7da
[ 44.212045] RSP: 002b:00007ffdc8838548 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[ 44.212045] RAX: ffffffffffffffda RBX: 00007ffdc8839978 RCX: 000000000044b7da
[ 44.212045] RDX: 0000000000000038 RSI: 00007ffdc8838770 RDI: 0000000000000003
[ 44.212045] RBP: 00007ffdc88385b0 R08: 00007ffdc883858c R09: 000000000000000c
[ 44.212045] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
[ 44.212045] R13: 00007ffdc8839968 R14: 00000000004c37d0 R15: 0000000000000001
[ 44.212045] </TASK>
[ 44.212045]
[ 44.212045] Allocated by task 97:
[ 44.212045] kasan_save_stack+0x22/0x50
[ 44.212045] kasan_set_track+0x25/0x30
[ 44.212045] __kasan_kmalloc+0x7f/0x90
[ 44.212045] __kmalloc_node_track_caller+0x5b/0x140
[ 44.212045] kmemdup+0x21/0x50
[ 44.212045] xfrm_dump_sa+0x17d/0x290
[ 44.212045] netlink_dump+0x322/0x6c0
[ 44.212045] __netlink_dump_start+0x353/0x430
[ 44.212045] xfrm_user_rcv_msg+0x3a4/0x410
[ 44.212045] netlink_rcv_skb+0xd6/0x210
[ 44.212045] xfrm_netlink_rcv+0x44/0x50
[ 44.212045] netlink_unicast+0x36f/0x4c0
[ 44.212045] netlink_sendmsg+0x3b7/0x700
[ 44.212045] sock_sendmsg+0xde/0xe0
[ 44.212045] __sys_sendto+0x18d/0x230
[ 44.212045] __x64_sys_sendto+0x71/0x90
[ 44.212045] do_syscall_64+0x3f/0x90
[ 44.212045] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 44.212045]
[ 44.212045] The buggy address belongs to the object at ffff88800870f300
[ 44.212045] which belongs to the cache kmalloc-64 of size 64
[ 44.212045] The buggy address is located 32 bytes inside of
[ 44.212045] allocated 36-byte region [ffff88800870f300, ffff88800870f324)
[ 44.212045]
[ 44.212045] The buggy address belongs to the physical page:
[ 44.212045] page:00000000e4de16ee refcount:1 mapcount:0 mapping:000000000 ...
[ 44.212045] flags: 0x100000000000200(slab|node=0|zone=1)
[ 44.212045] page_type: 0xffffffff()
[ 44.212045] raw: 0100000000000200ffff888004c41640dead0000000001220000000000000000
[ 44.212045] raw: 0000000000000000000000008020002000000001ffffffff0000000000000000
[ 44.212045] page dumped because: kasan: bad access detected
[ 44.212045]
[ 44.212045] Memory state around the buggy address:
[ 44.212045] ffff88800870f200: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 44.212045] ffff88800870f280: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
[ 44.212045] >ffff88800870f300: 00 00 00 00 04 fc fc fc fc fc fc fc fc fc fc fc
[ 44.212045] ^
[ 44.212045] ffff88800870f380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 44.212045] ffff88800870f400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 44.212045] ==================================================================
By investigating the code, we find the root cause of this OOB is the lack
of checks in xfrm_dump_sa(). The buggy code allows a malicious user to pass
arbitrary value of filter->splen/dplen. Hence, with crafted xfrm states,
the attacker can achieve 8 bytes heap OOB read, which causes info leak.
if (attrs[XFRMA_ADDRESS_FILTER]) {
filter = kmemdup(nla_data(attrs[XFRMA_ADDRESS_FILTER]),
sizeof(*filter), GFP_KERNEL);
if (filter == NULL)
return -ENOMEM;
// NO MORE CHECKS HERE !!!
}
This patch fixes the OOB by adding necessary boundary checks, just like
the code in pfkey_dump() function.
Fixes: d3623099d350 ("ipsec: add support of limited SA dump") Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Pausing and canceling balance can race to interrupt balance lead to BUG_ON
panic in btrfs_cancel_balance. The BUG_ON condition in btrfs_cancel_balance
does not take this race scenario into account.
However, the race condition has no other side effects. We can fix that.
With hardened usercopy enabled (CONFIG_HARDENED_USERCOPY=y), using the
/proc/powerpc/rtas/firmware_update interface to prepare a system
firmware update yields a BUG():
The blocks of the firmware image are copied directly from user memory
to objects allocated from flash_block_cache, so flash_block_cache must
be created using kmem_cache_create_usercopy() to mark it safe for user
access.
Fixes: 6d07d1cd300f ("usercopy: Restrict non-usercopy caches to size 0") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org>
[mpe: Trim and indent oops] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230810-rtas-flash-vs-hardened-usercopy-v2-1-dcf63793a938@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vm_dev has a separate lifecycle because it has a 'struct device'
embedded. Thus, having a release callback for it is correct.
Allocating the vm_dev struct with devres totally breaks this protection,
though. Instead of waiting for the vm_dev release callback, the memory
is freed when the platform_device is removed. Resulting in a
use-after-free when finally the callback is to be called.
To easily see the problem, compile the kernel with
CONFIG_DEBUG_KOBJECT_RELEASE and unbind with sysfs.
The fix is easy, don't use devres in this case.
Found during my research about object lifetime problems.
Fixes: 7eb781b1bbb7 ("virtio_mmio: add cleanup for virtio_mmio_probe") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Message-Id: <20230629120526.7184-1-wsa+renesas@sang-engineering.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the client is calling TEST_STATEID, then it is because some event
occurred that requires it to check all the stateids for validity and
call FREE_STATEID on the ones that have been revoked. In this case,
either the stateid exists in the list of stateids associated with that
nfs4_client, in which case it should be tested, or it does not. There
are no additional conditions to be considered.
Reported-by: "Frank Ch. Eigler" <fche@redhat.com> Fixes: 7df302f75ee2 ("NFSD: TEST_STATEID should not return NFS4ERR_STALE_STATEID") Cc: stable@vger.kernel.org # v5.7+ Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It's normal for a client to test a stateid from a previous instance,
e.g. after a network partition.
Signed-off-by: J. Bruce Fields <bfields@redhat.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: f75546f58a70 ("nfsd: Remove incorrect check in nfsd4_validate_stateid") Signed-off-by: Sasha Levin <sashal@kernel.org>
The Amiga partition parser module uses signed int for partition sector
address and count, which will overflow for disks larger than 1 TB.
Use sector_t as type for sector address and size to allow using disks
up to 2 TB without LBD support, and disks larger than 2 TB with LBD.
This bug was reported originally in 2012, and the fix was created by
the RDB author, Joanne Dow <jdow@earthlink.net>. A patch had been
discussed and reviewed on linux-m68k at that time but never officially
submitted. This patch differs from Joanne's patch only in its use of
sector_t instead of unsigned int. No checking for overflows is done
(see patch 3 of this series for that).
The driver overrides the error codes and IRQ0 returned by platform_get_irq()
to -EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the error
codes upstream. Since commit ce753ad1549c ("platform: finally disallow IRQ0
in platform_get_irq() and its ilk") IRQ0 is no longer returned by those APIs,
so we now can safely ignore it...
The driver overrides the error codes and IRQ0 returned by platform_get_irq()
to -EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the error
codes upstream. Since commit ce753ad1549c ("platform: finally disallow IRQ0
in platform_get_irq() and its ilk") IRQ0 is no longer returned by those APIs,
so we now can safely ignore it...
Fixes: 660fc733bd74 ("mmc: bcm2835: Add new driver for the sdhost controller.") Cc: stable@vger.kernel.org # v5.19+ Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20230617203622.6812-2-s.shtylyov@omp.ru Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
The call to mmc_request_done() can schedule, so it must not be called
from irq context. Wake the irq thread if it needs to be called, and let
its existing logic do its work.
The Qualcomm dwc3 glue driver is currently accessing the driver data of
the child core device during suspend and on wakeup interrupts. This is
clearly a bad idea as the child may not have probed yet or could have
been unbound from its driver.
The first such layering violation was part of the initial version of the
driver, but this was later made worse when the hack that accesses the
driver data of the grand child xhci device to configure the wakeup
interrupts was added.
Fixing this properly is not that easily done, so add a sanity check to
make sure that the child driver data is non-NULL before dereferencing it
for now.
Note that this relies on subtleties like the fact that driver core is
making sure that the parent is not suspended while the child is probing.
Since we may hold gic_lock in hardirq context, use raw spinlock
makes more sense given that it is for low-level interrupt handling
routine and the critical section is small.
The MIPS GIC driver uses irq_cpu_online() to go and program the
per-CPU interrupts. However, this method iterates over all IRQs
in the system, despite only 3 per-CPU interrupts being of interest.
Let's be terribly bold and do the iteration ourselves. To ensure
mutual exclusion, hold the gic_lock spinlock that is otherwise
taken while dealing with these interrupts.
Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20211021170414.3341522-3-maz@kernel.org
Stable-dep-of: 3d6a0e4197c0 ("irqchip/mips-gic: Use raw spinlock for gic_lock") Signed-off-by: Sasha Levin <sashal@kernel.org>
Traditionally, all CPUs in a system have identical numbers of SMT
siblings. That changes with hybrid processors where some logical CPUs
have a sibling and others have none.
Today, the CPU boot code sets the global variable smp_num_siblings when
every CPU thread is brought up. The last thread to boot will overwrite
it with the number of siblings of *that* thread. That last thread to
boot will "win". If the thread is a Pcore, smp_num_siblings == 2. If it
is an Ecore, smp_num_siblings == 1.
smp_num_siblings describes if the *system* supports SMT. It should
specify the maximum number of SMT threads among all cores.
Ensure that smp_num_siblings represents the system-wide maximum number
of siblings by always increasing its value. Never allow it to decrease.
On MeteorLake-P platform, this fixes a problem that the Ecore CPUs are
not updated in any cpu sibling map because the system is treated as an
UP system when probing Ecore CPUs.
Below shows part of the CPU topology information before and after the
fix, for both Pcore and Ecore CPU (cpu0 is Pcore, cpu 12 is Ecore).
...
-/sys/devices/system/cpu/cpu0/topology/package_cpus:000fff
-/sys/devices/system/cpu/cpu0/topology/package_cpus_list:0-11
+/sys/devices/system/cpu/cpu0/topology/package_cpus:3fffff
+/sys/devices/system/cpu/cpu0/topology/package_cpus_list:0-21
...
-/sys/devices/system/cpu/cpu12/topology/package_cpus:001000
-/sys/devices/system/cpu/cpu12/topology/package_cpus_list:12
+/sys/devices/system/cpu/cpu12/topology/package_cpus:3fffff
+/sys/devices/system/cpu/cpu12/topology/package_cpus_list:0-21
Notice that the "before" 'package_cpus_list' has only one CPU. This
means that userspace tools like lscpu will see a little laptop like
an 11-socket system:
-Core(s) per socket: 1
-Socket(s): 11
+Core(s) per socket: 16
+Socket(s): 1
This is also expected to make the scheduler do rather wonky things
too.
[ dhansen: remove CPUID detail from changelog, add end user effects ]
CC: stable@kernel.org Fixes: bbb65d2d365e ("x86: use cpuid vector 0xb when available for detecting cpu topology") Fixes: 95f3d39ccf7a ("x86/cpu/topology: Provide detect_extended_topology_early()") Suggested-by: Len Brown <len.brown@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/all/20230323015640.27906-1-rui.zhang%40intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
It was reported that soft dirty tracking doesn't work when using the
Radix MMU.
The tracking is supposed to work by clearing the soft dirty bit for a
mapping and then write protecting the PTE. If/when the page is written
to, a page fault occurs and the soft dirty bit is added back via
pte_mkdirty(). For example in wp_page_reuse():
Unfortunately on radix _PAGE_SOFTDIRTY is being dropped by
radix__ptep_set_access_flags(), called from ptep_set_access_flags(),
meaning the soft dirty bit is not set even though the page has been
written to.
Fix it by adding _PAGE_SOFTDIRTY to the set of bits that are able to be
changed in radix__ptep_set_access_flags().
projects / linux-stable / log