When mmc-pwrseq property is passed mmc_pwrseq_alloc() can return
-EPROBE_DEFER because driver for power sequence provider is not probed
yet. Do not show error message when this situation happens.
The current ARFS code relies on certain fields to be set in the SKB
(e.g. transport_header) and extracts IP addresses and ports by custom
code that parses the packet. The necessary SKB fields, however, are not
always set at that point, which leads to an out-of-bounds access. Use
skb_flow_dissect_flow_keys() to get the necessary information reliably,
fix the out-of-bounds access and reuse the code.
At this point nr_frags has been incremented but the frag does not yet
have a page assigned so freeing the skb results in a crash. Reset
nr_frags before freeing the skb to prevent this.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We set the field 'addr_trial_end' to 'jiffies', instead of the current
value 0, at the moment the node address is initialized. This guarantees
we don't inadvertently enter an address trial period when the node
address is explicitly set by the user.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should also enable team's vlan tx offload in hw_enc_features,
pass the vlan packets to the slave devices with vlan tci, let the
slave handle vlan tunneling offload implementation.
Fixes: 3268e5cb494d ("team: Advertise tunneling offload features") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the stream outq is not empty, need to kfree nstr_list.
Fixes: d570a59c5b5f ("sctp: only allow the out stream reset when the stream outq is empty") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In mlx4_en_config_rss_steer(), 'rss_map->indir_qp' is allocated through
kzalloc(). After that, mlx4_qp_alloc() is invoked to configure RSS
indirection. However, if mlx4_qp_alloc() fails, the allocated
'rss_map->indir_qp' is not deallocated, leading to a memory leak bug.
To fix the above issue, add the 'qp_alloc_err' label to free
'rss_map->indir_qp'.
Fixes: 4931c6ef04b4 ("net/mlx4_en: Optimized single ring steering") Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dsa framework has optional .port_mdb_{prepare,add,del} callback fields
for drivers to handle multicast database entries. When adding an entry, the
framework goes through a prepare phase, then a commit phase. Drivers not
providing these callbacks should be detected in the prepare phase.
DSA core may still bypass the bridge layer and call the dsa_port_mdb_add
function directly with no prepare phase or no switchdev trans object,
and the framework ends up calling an undefined .port_mdb_add callback.
This results in a NULL pointer dereference, as shown in the log below.
The other functions seem to be properly guarded. Do the same for
.port_mdb_add in dsa_switch_mdb_add_bitmap() as well.
As commit 30d8177e8ac7 ("bonding: Always enable vlan tx offload")
said, we should always enable bonding's vlan tx offload, pass the
vlan packets to the slave devices with vlan tci, let them to handle
vlan implementation.
Now if encapsulation protocols like VXLAN is used, skb->encapsulation
may be set, then the packet is passed to vlan device which based on
bonding device. However in netif_skb_features(), the check of
hw_enc_features:
if (skb->encapsulation)
features &= dev->hw_enc_features;
clears NETIF_F_HW_VLAN_CTAG_TX/NETIF_F_HW_VLAN_STAG_TX. This results
in same issue in commit 30d8177e8ac7 like this:
vlan_dev_hard_start_xmit
-->dev_queue_xmit
-->validate_xmit_skb
-->netif_skb_features //NETIF_F_HW_VLAN_CTAG_TX is cleared
-->validate_xmit_vlan
-->__vlan_hwaccel_push_inside //skb->tci is cleared
...
--> bond_start_xmit
--> bond_xmit_hash //BOND_XMIT_POLICY_ENCAP34
--> __skb_flow_dissect // nhoff point to IP header
--> case htons(ETH_P_8021Q)
// skb_vlan_tag_present is false, so
vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan),
//vlan point to ip header wrongly
Fixes: b2a103e6d0af ("bonding: convert to ndo_fix_features") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 04f05230c5c13 ("bnx2x: Remove configured vlans as
part of unload sequence."), introduced a regression in driver
that as a part of VF's reload flow, VLANs created on the VF
doesn't get re-configured in hardware as vlan metadata/info
was not getting cleared for the VFs which causes vlan PING to stop.
This patch clears the vlan metadata/info so that VLANs gets
re-configured back in the hardware in VF's reload flow and
PING/traffic continues for VLANs created over the VFs.
Fixes: 04f05230c5c13 ("bnx2x: Remove configured vlans as part of unload sequence.") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com> Signed-off-by: Shahed Shaikh <shshaikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
trackpoint_detect() should be static inline while
CONFIG_MOUSE_PS2_TRACKPOINT is not set, otherwise, we build fails:
drivers/input/mouse/alps.o: In function `trackpoint_detect':
alps.c:(.text+0x8e00): multiple definition of `trackpoint_detect'
drivers/input/mouse/psmouse-base.o:psmouse-base.c:(.text+0x1b50): first defined here
Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 55e3d9224b60 ("Input: psmouse - allow disabing certain protocol extensions") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Hui Wang <hui.wang@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change ct id hash calculation to only use invariants.
Currently the ct id hash calculation is based on some fields that can
change in the lifetime on a conntrack entry in some corner cases. The
current hash uses the whole tuple which contains an hlist pointer which
will change when the conntrack is placed on the dying list resulting in
a ct id change.
This patch also removes the reply-side tuple and extension pointer from
the hash calculation so that the ct id will will not change from
initialization until confirmation.
Fixes: 3c79107631db1f7 ("netfilter: ctnetlink: don't use conntrack/expect object addresses as id") Signed-off-by: Dirk Morris <dmorris@metaloft.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The initial support for dynamic ftrace trampolines in modules made use
of an indirect branch which loaded its target from the beginning of
a special section (e71a4e1bebaf7 ("arm64: ftrace: add support for far
branches to dynamic ftrace")). Since no instructions were being patched,
no cache maintenance was needed. However, later in be0f272bfc83 ("arm64:
ftrace: emit ftrace-mod.o contents through code") this code was reworked
to output the trampoline instructions directly into the PLT entry but,
unfortunately, the necessary cache maintenance was overlooked.
Add a call to __flush_icache_range() after writing the new trampoline
instructions but before patching in the branch to the trampoline.
Storage devices which report supporting discard commands like
WRITE_SAME_16 with unmap, but reject discard commands sent to the
storage device. This is a clear storage firmware bug but it doesn't
change the fact that should a program cause discards to be sent to a
multipath device layered on this buggy storage, all paths can end up
failed at the same time from the discards, causing possible I/O loss.
The first discard to a path will fail with Illegal Request, Invalid
field in cdb, e.g.:
kernel: sd 8:0:8:19: [sdfn] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
kernel: sd 8:0:8:19: [sdfn] tag#0 Sense Key : Illegal Request [current]
kernel: sd 8:0:8:19: [sdfn] tag#0 Add. Sense: Invalid field in cdb
kernel: sd 8:0:8:19: [sdfn] tag#0 CDB: Write same(16) 93 08 00 00 00 00 00 a0 08 00 00 00 80 00 00 00
kernel: blk_update_request: critical target error, dev sdfn, sector 10487808
The SCSI layer converts this to the BLK_STS_TARGET error number, the sd
device disables its support for discard on this path, and because of the
BLK_STS_TARGET error multipath fails the discard without failing any
path or retrying down a different path. But subsequent discards can
cause path failures. Any discards sent to the path which already failed
a discard ends up failing with EIO from blk_cloned_rq_check_limits with
an "over max size limit" error since the discard limit was set to 0 by
the sd driver for the path. As the error is EIO, this now fails the
path and multipath tries to send the discard down the next path. This
cycle continues as discards are sent until all paths fail.
Fix this by training DM core to disable DISCARD if the underlying
storage already did so.
Also, fix branching in dm_done() and clone_endio() to reflect the
mutually exclussive nature of the IO operations in question.
Cc: stable@vger.kernel.org Reported-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
[Salvatore Bonaccorso: backported to 4.19: Adjust for context changes in
drivers/md/dm-core.h] Signed-off-by: Salvatore Bonaccorso <carnil@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180803232721.20038-1-rodrigo.vivi@intel.com Signed-off-by: Wan Yusof, Wan Fahim AsqalaniX <wan.fahim.asqalanix.wan.yusof@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On Motorola Mapphone devices such as Droid 4 there are five USB ports
that do not use the same layout as Gobi 1K/2K/etc devices listed in
qcserial.c. So we should use qcaux.c or option.c as noted by
Dan Williams <dan.j.williams@intel.com>.
As the Motorola USB serial ports have an interrupt endpoint as shown
with lsusb -v, we should use option.c instead of qcaux.c as pointed out
by Johan Hovold <johan@kernel.org>.
The ff/ff/ff interfaces seem to always be UARTs on Motorola devices.
For the other interfaces, class 0x0a (CDC Data) should not in general
be added as they are typically part of a multi-interface function as
noted earlier by Bjørn Mork <bjorn@mork.no>.
However, looking at the Motorola mapphone kernel code, the mdm6600 0x0a
class is only used for flashing the modem firmware, and there are no
other interfaces. So I've added that too with more details below as it
works just fine.
The ttyUSB ports on Droid 4 are:
ttyUSB0 DIAG, CQDM-capable
ttyUSB1 MUX or NMEA, no response
ttyUSB2 MUX or NMEA, no response
ttyUSB3 TCMD
ttyUSB4 AT-capable
The ttyUSB0 is detected as QCDM capable by ModemManager. I think
it's only used for debugging with ModemManager --debug for sending
custom AT commands though. ModemManager already can manage data
connection using the USB QMI ports that are already handled by the
qmi_wwan.c driver.
To enable the MUX or NMEA ports, it seems that something needs to be
done additionally to enable them, maybe via the DIAG or TCMD port.
It might be just a NVRAM setting somewhere, but I have no idea what
NVRAM settings may need changing for that.
The TCMD port seems to be a Motorola custom protocol for testing
the modem and to configure it's NVRAM and seems to work just fine
based on a quick test with a minimal tcmdrw tool I wrote.
The voice modem AT-capable port seems to provide only partial
support, and no PM support compared to the TS 27.010 based UART
wired directly to the modem.
The UARTs added with this change are the same product IDs as the
Motorola Mapphone Android Linux kernel mdm6600_id_table. I don't
have any mdm9600 based devices, so I have only tested these on
mdm6600 based droid 4.
Then for the class 0x0a (CDC Data) mode, the Motorola Mapphone Android
Linux kernel driver moto_flashqsc.c just seems to change the
port->bulk_out_size to 8K from the default. And is only used for
flashing the modem firmware it seems.
I've verified that flashing the modem with signed firmware works just
fine with the option driver after manually toggling the GPIO pins, so
I've added droid 4 modem flashing mode to the option driver. I've not
added the other devices listed in moto_flashqsc.c in case they really
need different port->bulk_out_size. Those can be added as they get
tested to work for flashing the modem.
After this patch the output of /sys/kernel/debug/usb/devices has
the following for normal 22b8:2a70 mode including the related qmi_wwan
interfaces:
This patch adds support for MF871A USB modem (aka Speed USB STICK U03)
to option driver. This modem is manufactured by ZTE corporation, and
sold by KDDI.
Since the role_store() uses strncmp(), it's possible to refer
out-of-memory if the sysfs data size is smaller than strlen("host").
This patch fixes it by using sysfs_streq() instead of strncmp().
Fixes: cc995c9ec118 ("usb: gadget: udc: renesas_usb3: add support for usb role swap") Cc: <stable@vger.kernel.org> # v4.12+ Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The syzbot fuzzer has found two (!) races in the USB character device
registration and deregistration routines. This patch fixes the races.
The first race results from the fact that usb_deregister_dev() sets
usb_minors[intf->minor] to NULL before calling device_destroy() on the
class device. This leaves a window during which another thread can
allocate the same minor number but will encounter a duplicate name
error when it tries to register its own class device. A typical error
message in the system log would look like:
The patch fixes this race by destroying the class device first.
The second race is in usb_register_dev(). When that routine runs, it
first allocates a minor number, then drops minor_rwsem, and then
creates the class device. If the device creation fails, the minor
number is deallocated and the whole routine returns an error. But
during the time while minor_rwsem was dropped, there is a window in
which the minor number is allocated and so another thread can
successfully open the device file. Typically this results in
use-after-free errors or invalid accesses when the other thread closes
its open file reference, because the kernel then tries to release
resources that were already deallocated when usb_register_dev()
failed. The patch fixes this race by keeping minor_rwsem locked
throughout the entire routine.
The max9611 driver reads the die temperature at probe time to validate
the communication channel. Use the actual read value to perform the test
instead of the read function return value, which was mistakenly used so
far.
The temperature reading test was only successful because the 0 return
value is in the range of supported temperatures.
`dt3k_ns_to_timer()` determines the prescaler and divisor to use to
produce a desired timing period. It is influenced by a rounding mode
and can round the divisor up, down, or to the nearest value. However,
the code for rounding up currently does the same as rounding down! Fix
ir by using the `DIV_ROUND_UP()` macro to calculate the divisor when
rounding up.
Also, change the types of the `divider`, `base` and `prescale` variables
from `int` to `unsigned int` to avoid mixing signed and unsigned types
in the calculations.
Also fix a typo in a nearby comment: "improvment" => "improvement".
(`divider`, `base` and `prescale` are type `int`, `timer_base` and
`*nanosec` are type `unsigned int`. The value of `timer_base` will be
either 50 or 100.)
The main reason for the overflow is that the calculation for `base` is
completely wrong. It should be:
base = timer_base * (prescale + 1);
which matches an earlier instance of this calculation in the same
function.
Since commit commit 328e56647944 ("KVM: arm/arm64: vgic: Defer
touching GICH_VMCR to vcpu_load/put"), we leave ICH_VMCR_EL2 (or
its GICv2 equivalent) loaded as long as we can, only syncing it
back when we're scheduled out.
There is a small snag with that though: kvm_vgic_vcpu_pending_irq(),
which is indirectly called from kvm_vcpu_check_block(), needs to
evaluate the guest's view of ICC_PMR_EL1. At the point were we
call kvm_vcpu_check_block(), the vcpu is still loaded, and whatever
changes to PMR is not visible in memory until we do a vcpu_put().
Things go really south if the guest does the following:
mov x0, #0 // or any small value masking interrupts
msr ICC_PMR_EL1, x0
[vcpu preempted, then rescheduled, VMCR sampled]
mov x0, #ff // allow all interrupts
msr ICC_PMR_EL1, x0
wfi // traps to EL2, so samping of VMCR
[interrupt arrives just after WFI]
Here, the hypervisor's view of PMR is zero, while the guest has enabled
its interrupts. kvm_vgic_vcpu_pending_irq() will then say that no
interrupts are pending (despite an interrupt being received) and we'll
block for no reason. If the guest doesn't have a periodic interrupt
firing once it has blocked, it will stay there forever.
To avoid this unfortuante situation, let's resync VMCR from
kvm_arch_vcpu_blocking(), ensuring that a following kvm_vcpu_check_block()
will observe the latest value of PMR.
This has been found by booting an arm64 Linux guest with the pseudo NMI
feature, and thus using interrupt priorities to mask interrupts instead
of the usual PSTATE masking.
When fall-through warnings was enabled by default, commit d93512ef0f0e
("Makefile: Globally enable fall-through warning"), the following
warnings was starting to show up:
In file included from ../arch/arm64/include/asm/kvm_emulate.h:19,
from ../arch/arm64/kvm/regmap.c:13:
../arch/arm64/kvm/regmap.c: In function ‘vcpu_write_spsr32’:
../arch/arm64/include/asm/kvm_hyp.h:31:3: warning: this statement may fall
through [-Wimplicit-fallthrough=]
asm volatile(ALTERNATIVE(__msr_s(r##nvh, "%x0"), \
^~~
../arch/arm64/include/asm/kvm_hyp.h:46:31: note: in expansion of macro ‘write_sysreg_elx’
#define write_sysreg_el1(v,r) write_sysreg_elx(v, r, _EL1, _EL12)
^~~~~~~~~~~~~~~~
../arch/arm64/kvm/regmap.c:180:3: note: in expansion of macro ‘write_sysreg_el1’
write_sysreg_el1(v, SYS_SPSR);
^~~~~~~~~~~~~~~~
../arch/arm64/kvm/regmap.c:181:2: note: here
case KVM_SPSR_ABT:
^~~~
In file included from ../arch/arm64/include/asm/cputype.h:132,
from ../arch/arm64/include/asm/cache.h:8,
from ../include/linux/cache.h:6,
from ../include/linux/printk.h:9,
from ../include/linux/kernel.h:15,
from ../include/asm-generic/bug.h:18,
from ../arch/arm64/include/asm/bug.h:26,
from ../include/linux/bug.h:5,
from ../include/linux/mmdebug.h:5,
from ../include/linux/mm.h:9,
from ../arch/arm64/kvm/regmap.c:11:
../arch/arm64/include/asm/sysreg.h:837:2: warning: this statement may fall
through [-Wimplicit-fallthrough=]
asm volatile("msr " __stringify(r) ", %x0" \
^~~
../arch/arm64/kvm/regmap.c:182:3: note: in expansion of macro ‘write_sysreg’
write_sysreg(v, spsr_abt);
^~~~~~~~~~~~
../arch/arm64/kvm/regmap.c:183:2: note: here
case KVM_SPSR_UND:
^~~~
Rework to add a 'break;' in the swich-case since it didn't have that,
leading to an interresting set of bugs.
Cc: stable@vger.kernel.org # v4.17+ Fixes: a892819560c4 ("KVM: arm64: Prepare to handle deferred save/restore of 32-bit registers") Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
[maz: reworked commit message, fixed stable range] Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit d66acc39c7ce ("bitops: Optimise get_order()") introduced a
compilation warning because "rx_frag_size" is an "ushort" while
PAGE_SHIFT here is 16.
The commit changed the get_order() to be a multi-line macro where
compilers insist to check all statements in the macro even when
__builtin_constant_p(rx_frag_size) will return false as "rx_frag_size"
is a module parameter.
In file included from ./arch/powerpc/include/asm/page_64.h:107,
from ./arch/powerpc/include/asm/page.h:242,
from ./arch/powerpc/include/asm/mmu.h:132,
from ./arch/powerpc/include/asm/lppaca.h:47,
from ./arch/powerpc/include/asm/paca.h:17,
from ./arch/powerpc/include/asm/current.h:13,
from ./include/linux/thread_info.h:21,
from ./arch/powerpc/include/asm/processor.h:39,
from ./include/linux/prefetch.h:15,
from drivers/net/ethernet/emulex/benet/be_main.c:14:
drivers/net/ethernet/emulex/benet/be_main.c: In function 'be_rx_cqs_create':
./include/asm-generic/getorder.h:54:9: warning: comparison is always
true due to limited range of data type [-Wtype-limits]
(((n) < (1UL << PAGE_SHIFT)) ? 0 : \
^
drivers/net/ethernet/emulex/benet/be_main.c:3138:33: note: in expansion
of macro 'get_order'
adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE;
^~~~~~~~~
Fix it by moving all of this multi-line macro into a proper function,
and killing __get_order() off.
[akpm@linux-foundation.org: remove __get_order() altogether]
[cai@lca.pw: v2] Link: http://lkml.kernel.org/r/1564000166-31428-1-git-send-email-cai@lca.pw Link: http://lkml.kernel.org/r/1563914986-26502-1-git-send-email-cai@lca.pw Fixes: d66acc39c7ce ("bitops: Optimise get_order()") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Howells <dhowells@redhat.com> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Bill Wendling <morbo@google.com> Cc: James Y Knight <jyknight@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
fs/ocfs2/xattr.c: In function ocfs2_xattr_bucket_find:
fs/ocfs2/xattr.c:3828:6: warning: variable last_hash set but not used [-Wunused-but-set-variable]
It's never used and can be removed.
Link: http://lkml.kernel.org/r/20190716132110.34836-1-yuehaibing@huawei.com Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When running ltp's oom test with kmemleak enabled, the below warning was
triggerred since kernel detects __GFP_NOFAIL & ~__GFP_DIRECT_RECLAIM is
passed in:
The mempool_alloc_slab() clears __GFP_DIRECT_RECLAIM, however kmemleak
has __GFP_NOFAIL set all the time due to d9570ee3bd1d4f2 ("kmemleak:
allow to coexist with fault injection"). But, it doesn't make any sense
to have __GFP_NOFAIL and ~__GFP_DIRECT_RECLAIM specified at the same
time.
According to the discussion on the mailing list, the commit should be
reverted for short term solution. Catalin Marinas would follow up with
a better solution for longer term.
The failure rate of kmemleak metadata allocation may increase in some
circumstances, but this should be expected side effect.
Link: http://lkml.kernel.org/r/1563299431-111710-1-git-send-email-yang.shi@linux.alibaba.com Fixes: d9570ee3bd1d4f2 ("kmemleak: allow to coexist with fault injection") Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
add_gpu_components() adds found GPU nodes from the DT to the match list,
regardless of the status of the nodes. This is a problem, because if the
nodes are disabled, they should not be on the match list because they will
not be matched. This prevents display from initing if a GPU node is
defined, but it's status is disabled.
Fix this by checking the node's status before adding it to the match list.
The problem was that the MAD PD was deallocated before the MAD CQ.
There was completion work pending for the CQ when the PD got deallocated.
When the mad completion handling reached procedure
ib_mad_post_receive_mads(), we got a use-after-free bug in the following
line of code in that procedure:
sg_list.lkey = qp_info->port_priv->pd->local_dma_lkey;
(the pd pointer in the above line is no longer valid, because the
pd has been deallocated).
We fix this by allocating the PD before the CQ in procedure
ib_mad_port_open(), and deallocating the PD after freeing the CQ
in procedure ib_mad_port_close().
Since the CQ completion work queue is flushed during ib_free_cq(),
no completions will be pending for that CQ when the PD is later
deallocated.
Note that freeing the CQ before deallocating the PD is the practice
in the ULPs.
Driver shouldn't allow to use UMR to register a MR when
umr_modify_atomic_disabled is set. Otherwise it will always end up with a
failure in the post send flow which sets the UMR WQE to modify atomic access
right.
Fixes: c8d75a980fab ("IB/mlx5: Respect new UMR capabilities") Signed-off-by: Guy Levi <guyle@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190731081929.32559-1-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some processors may mispredict an array bounds check and
speculatively access memory that they should not. With
a user supplied array index we like to play things safe
by masking the value with the array size before it is
used as an index.
arch/arm64/mm/mmu.c: In function 'pud_free_pmd_page':
arch/arm64/mm/mmu.c:1033:8: warning: variable 'pud' set but not used
[-Wunused-but-set-variable]
pud_t pud;
^~~
because pud_table() is a macro and compiled away. Fix it by making it a
static inline function and for pud_sect() as well.
Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Prohibit probing on return_address() and subroutines which
is called from return_address(), since the it is invoked from
trace_hardirqs_off() which is also kprobe blacklisted.
drivers/firmware/efi/libstub/arm-stub.c: In function 'efi_entry':
drivers/firmware/efi/libstub/arm-stub.c:132:22: warning: variable 'si'
set but not used [-Wunused-but-set-variable]
Fix it by making free_screen_info() a static inline function.
Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the particular version of clang a user has doesn't enable
-Werror=unknown-warning-option by default, even though it is the
default[1], then make sure to pass the option to the Kconfig cc-option
command so that testing options from Kconfig files works properly.
Otherwise, depending on the default values setup in the clang toolchain
we will silently assume options such as -Wmaybe-uninitialized are
supported by clang, when they really aren't.
A compilation issue only started happening for me once commit 589834b3a009 ("kbuild: Add -Werror=unknown-warning-option to
CLANG_FLAGS") was applied on top of commit b303c6df80c9 ("kbuild:
compute false-positive -Wmaybe-uninitialized cases in Kconfig"). This
leads kbuild to try and test for the existence of the
-Wmaybe-uninitialized flag with the cc-option command in
scripts/Kconfig.include, and it doesn't see an error returned from the
option test so it sets the config value to Y. Then the Makefile tries to
pass the unknown option on the command line and
-Werror=unknown-warning-option catches the invalid option and breaks the
build. Before commit 589834b3a009 ("kbuild: Add
-Werror=unknown-warning-option to CLANG_FLAGS") the build works fine,
but any cc-option test of a warning option in Kconfig files silently
evaluates to true, even if the warning option flag isn't supported on
clang.
Note: This doesn't change cc-option usages in Makefiles because those
use a different rule that includes KBUILD_CFLAGS by default (see the
__cc-option command in scripts/Kbuild.incluide). The KBUILD_CFLAGS
variable already has the -Werror=unknown-warning-option flag set. Thanks
to Doug for pointing out the different rule.
[1] https://clang.llvm.org/docs/DiagnosticsReference.html#wunknown-warning-option Cc: Peter Smith <peter.smith@linaro.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Coccinelle reports a path that the array "data" is never initialized.
The path skips the checks in the conditional branches when either
of callback functions, read_wave_vgprs and read_wave_sgprs, is not
registered. Later, the uninitialized "data" array is read
in the while-loop below and passed to put_user().
Fix the path by allocating the array with kcalloc().
The patch is simplier than adding a fall-back branch that explicitly
calls memset(data, 0, ...). Also it does not need the multiplication
1024*sizeof(*data) as the size parameter for memset() though there is
no risk of integer overflow.
Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In qla2x00_alloc_fcport(), fcport is assigned to NULL in the error
handling code on line 4880:
fcport = NULL;
Then fcport is used on lines 4883-4886:
INIT_WORK(&fcport->del_work, qla24xx_delete_sess_fn);
INIT_WORK(&fcport->reg_work, qla_register_fcport_fn);
INIT_LIST_HEAD(&fcport->gnl_entry);
INIT_LIST_HEAD(&fcport->list);
Thus, possible null-pointer dereferences may occur.
To fix these bugs, qla2x00_alloc_fcport() directly returns NULL
in the error handling code.
These bugs are found by a static analysis tool STCheck written by us.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Reviewed-by: Bader Ali - Saleh <bader.alisaleh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The fiemap handler locks a file range that can have unflushed delalloc,
and after locking the range, it tries to attach to a running transaction.
If the running transaction started its commit, that is, it is in state
TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the
flushoncommit option or the transaction is creating a snapshot for the
subvolume that contains the file that fiemap is operating on, we end up
deadlocking. This happens because fiemap is blocked on the transaction,
waiting for it to complete, and the transaction is waiting for the flushed
dealloc to complete, which requires locking the file range that the fiemap
task already locked. The following stack traces serve as an example of
when this deadlock happens:
If we were joining the transaction instead of attaching to it, we would
not risk a deadlock because a join only blocks if the transaction is in a
state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc
flush performed by a transaction is done before it reaches that state,
when it is in the state TRANS_STATE_COMMIT_START. However a transaction
join is intended for use cases where we do modify the filesystem, and
fiemap only needs to peek at delayed references from the current
transaction in order to determine if extents are shared, and, besides
that, when there is no current transaction or when it blocks to wait for
a current committing transaction to complete, it creates a new transaction
without reserving any space. Such unnecessary transactions, besides doing
unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary
rotation of the precious backup roots.
So fix this by adding a new transaction join variant, named join_nostart,
which behaves like the regular join, but it does not create a transaction
when none currently exists or after waiting for a committing transaction
to complete.
Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If DRM_LVDS_ENCODER=y but CONFIG_DRM_KMS_HELPER=m,
build fails:
drivers/gpu/drm/bridge/lvds-encoder.o: In function `lvds_encoder_probe':
lvds-encoder.c:(.text+0x155): undefined reference to `devm_drm_panel_bridge_add'
Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: dbb58bfd9ae6 ("drm/bridge: Fix lvds-encoder since the panel_bridge rework.") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190729071216.27488-1-yuehaibing@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
BUG: KASAN: global-out-of-bounds in ata_exec_internal_sg+0x50f/0xc70
Read of size 16 at addr ffffffff91f41f80 by task scsi_eh_1/149
...
The buggy address belongs to the variable:
cdb.48319+0x0/0x40
Much like commit 18c9a99bce2a ("libata: zpodd: small read overflow in
eject_tray()"), this fixes a cdb[] buffer length, this time in
zpodd_get_mech_type():
We read from the cdb[] buffer in ata_exec_internal_sg(). It has to be
ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes.
Reported-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in> Fixes: afe759511808c ("libata: identify and init ZPODD devices") Link: https://lore.kernel.org/lkml/201907181423.E808958@keescook/ Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
When building our local version of perf with MSAN (Memory Sanitizer) and
running the perf record command, MSAN throws a use of uninitialized
value warning in "tools/perf/util/util.c:333:6".
This warning stems from the "buf" variable being passed into "write".
It originated as the variable "ev" with the type union perf_event*
defined in the "perf_event__synthesize_attr" function in
"tools/perf/util/header.c".
In the "perf_event__synthesize_attr" function they allocate space with a malloc
call using ev, then go on to only assign some of the member variables before
passing "ev" on as a parameter to the "process" function therefore "ev"
contains uninitialized memory. Changing the malloc call to zalloc to initialize
all the members of "ev" which gets rid of the warning.
To reproduce this warning, build perf by running:
make -C tools/perf CLANG=1 CC=clang EXTRA_CFLAGS="-fsanitize=memory\
-fsanitize-memory-track-origins"
(Additionally, llvm might have to be installed and clang might have to
be specified as the compiler - export CC=/usr/bin/clang)
then running:
tools/perf/perf record -o - ls / | tools/perf/perf --no-pager annotate\
-i - --stdio
Please see the cover letter for why false positive warnings may be
generated.
Signed-off-by: Numfor Mbiziwo-Tiapo <nums@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Drayton <mbd@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20190724234500.253358-2-nums@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The GPCv2 is a stacked IRQ controller below the ARM GIC. It doesn't
care about the IRQ type itself, but needs to forward the type to the
parent IRQ controller, so this one can be configured correctly.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/xen/xen-pciback/conf_space_capability.c: In function pm_ctrl_write:
drivers/xen/xen-pciback/conf_space_capability.c:119:25: warning:
variable old_state set but not used [-Wunused-but-set-variable]
It is never used so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The module reset code in the Renesas CPG/MSSR driver uses
read-modify-write (RMW) operations to write to a Software Reset Register
(SRCRn), and simple writes to write to a Software Reset Clearing
Register (SRSTCLRn), as was mandated by the R-Car Gen2 and Gen3 Hardware
User's Manuals.
However, this may cause a race condition when two devices are reset in
parallel: if the reset for device A completes in the middle of the RMW
operation for device B, device A may be reset again, causing subtle
failures (e.g. i2c timeouts):
thread A thread B
-------- --------
val = SRCRn
val |= bit A
SRCRn = val
delay
val = SRCRn (bit A is set)
SRSTCLRn = bit A
(bit A in SRCRn is cleared)
val |= bit B
SRCRn = val (bit A and B are set)
This can be reproduced on e.g. Salvator-XS using:
$ while true; do i2cdump -f -y 4 0x6A b > /dev/null; done &
$ while true; do i2cdump -f -y 2 0x10 b > /dev/null; done &
According to the R-Car Gen3 Hardware Manual Errata for Rev.
0.80 of Feb 28, 2018, reflected in Rev. 1.00 of the R-Car Gen3 Hardware
User's Manual, writes to SRCRn do not require read-modify-write cycles.
Note that the R-Car Gen2 Hardware User's Manual has not been updated
yet, and still says a read-modify-write sequence is required. According
to the hardware team, the reset hardware block is the same on both R-Car
Gen2 and Gen3, though.
Hence fix the issue by replacing the read-modify-write operations on
SRCRn by simple writes.
Reported-by: Yao Lihua <Lihua.Yao@desay-svautomotive.com> Fixes: 6197aa65c4905532 ("clk: renesas: cpg-mssr: Add support for reset control") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Linh Phung <linh.phung.jy@renesas.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In clk_generated_determine_rate(), if the divisor is greater than
GENERATED_MAX_DIV + 1, then the wrong best_rate will be returned.
If clk_generated_set_rate() will be called later with this wrong
rate, it will return -EINVAL, so the generated clock won't change
its value. Do no let the divisor be greater than GENERATED_MAX_DIV + 1.
ebtables doesn't include the base chain policies in the rule count,
so we need to add them manually when we call into the x_tables core
to allocate space for the comapt offset table.
This lead syzbot to trigger:
WARNING: CPU: 1 PID: 9012 at net/netfilter/x_tables.c:649
xt_compat_add_offset.cold+0x11/0x36 net/netfilter/x_tables.c:649
Reported-by: syzbot+276ddebab3382bbf72db@syzkaller.appspotmail.com Fixes: 2035f3ff8eaa ("netfilter: ebtables: compat: un-break 32bit setsockopt when no rules are present") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
get_registers() may fail with -ENOMEM and in this
case we can read a garbage from the status variable tmp.
Reported-by: syzbot+3499a83b2d062ae409d4@syzkaller.appspotmail.com Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
==================================================================
BUG: KASAN: use-after-free in __lock_acquire+0x302a/0x3b50
kernel/locking/lockdep.c:3753
Read of size 8 at addr ffff8881cf591a08 by task syz-executor.1/26260
Memory state around the buggy address: ffff8881cf591900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881cf591980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff8881cf591a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^ ffff8881cf591a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881cf591b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
In order to avoid opening a disconnected device, we need to check exist
again after acquiring the existance lock, and bail out if necessary.
The ioctl handler uses the intfdata of a second interface,
which may not be present in a broken or malicious device, hence
the intfdata needs to be checked for NULL.
We have 3 new lenovo laptops which have conexant codec 0x14f11f86,
these 3 laptops also have the noise issue when rebooting, after
letting the codec enter D3 before rebooting or poweroff, the noise
disappers.
Instead of adding a new ID again in the reboot_notify(), let us make
this function apply to all conexant codec. In theory make codec enter
D3 before rebooting or poweroff is harmless, and I tested this change
on a couple of other Lenovo laptops which have different conexant
codecs, there is no side effect so far.
Make codec enter D3 before rebooting or poweroff can fix the noise
issue on some laptops. And in theory it is harmless for all codecs
to enter D3 before rebooting or poweroff, let us add a generic
reboot_notify, then realtek and conexant drivers can call this
function.
In snd_hda_parse_generic_codec(), 'spec' is allocated through kzalloc().
Then, the pin widgets in 'codec' are parsed. However, if the parsing
process fails, 'spec' is not deallocated, leading to a memory leak.
To fix the above issue, free 'spec' before returning the error.
MSI MPG X570 board is with another AMD HD-audio controller (PCI ID
1022:1487) and it requires the same workaround applied for X370, etc
(PCI ID 1022:1457).
The `uac_mixer_unit_descriptor` shown as below is read from the
device side. In `parse_audio_mixer_unit`, `baSourceID` field is
accessed from index 0 to `bNrInPins` - 1, the current implementation
assumes that descriptor is always valid (the length of descriptor
is no shorter than 5 + `bNrInPins`). If a descriptor read from
the device side is invalid, it may trigger out-of-bound memory
access.
`check_input_term` recursively calls itself with input from
device side (e.g., uac_input_terminal_descriptor.bCSourceID)
as argument (id). In `check_input_term`, if `check_input_term`
is called with the same `id` argument as the caller, it triggers
endless recursive call, resulting kernel space stack overflow.
This patch fixes the bug by adding a bitmap to `struct mixer_build`
to keep track of the checked ids and stop the execution if some id
has been checked (similar to how parse_audio_unit handles unitid
argument).
ITLB entry modifications must be followed by the isync instruction
before the new entries are possibly used. cpu_reset lacks one isync
between ITLB way 6 initialization and jump to the identity mapping.
Add missing isync to xtensa cpu_reset.
Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To avoid reducing the frequency of a CPU prematurely, we skip reducing
the frequency if the CPU had been busy recently.
This should not be done when the limits of the policy are changed, for
example due to thermal throttling. We should always get the frequency
within the new limits as soon as possible.
Trying to fix this by using only one flag, i.e. need_freq_update, can
lead to a race condition where the flag gets cleared without forcing us
to change the frequency at least once. And so this patch introduces
another flag to avoid that race condition.
Fixes: ecd288429126 ("cpufreq: schedutil: Don't set next_freq to UINT_MAX") Cc: v4.18+ <stable@vger.kernel.org> # v4.18+ Reported-by: Doug Smythies <dsmythies@telus.net> Tested-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 7e5d1fd75c3dde9fc10c4472b9368089d1b81d00 ("pwm: Set
class for exported channels in sysfs") as it causes regression with
multiple pwm chip[1], when exporting a pwm channel (echo X > export):
- ABI (Documentation/ABI/testing/sysfs-class-pwm) states pwmX should be
created in /sys/class/pwm/pwmchipN/pwmX
- Reverted patch causes new entry to be also created directly in
/sys/class/pwm/pwmX
- 1st time, exporting pwmX will create an entry in /sys/class/pwm/pwmX
- class attributes are added under pwmX folder, such as export, unexport
npwm, symlinks. This is wrong as it belongs to pwmchipN. It may cause
bad behavior and report wrong values.
- when another export happens on another pwmchip, it can't be created
(e.g. -EEXIST). This is causing the issue with multiple pwmchip.
Example on stm32 (stm32429i-eval) platform:
$ ls /sys/class/pwm
pwmchip0 pwmchip4
$ cd /sys/class/pwm/pwmchip0/
$ echo 0 > export
$ ls /sys/class/pwm
pwm0 pwmchip0 pwmchip4
Currently, when checking to see if accessing n bytes starting at address
"ptr" will cause a wraparound in the memory addresses, the check in
check_bogus_address() adds an extra byte, which is incorrect, as the
range of addresses that will be accessed is [ptr, ptr + (n - 1)].
This can lead to incorrectly detecting a wraparound in the memory
address, when trying to read 4 KB from memory that is mapped to the the
last possible page in the virtual address space, when in fact, accessing
that range of memory would not cause a wraparound to occur.
Use the memory range that will actually be accessed when considering if
accessing a certain amount of bytes will cause the memory address to
wrap around.
Link: http://lkml.kernel.org/r/1564509253-23287-1-git-send-email-isaacm@codeaurora.org Fixes: f5509cc18daa ("mm: Hardened usercopy") Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org> Co-developed-by: Prasad Sodagudi <psodagud@codeaurora.org> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Trilok Soni <tsoni@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch is sent to report an use after free in mem_cgroup_iter()
after merging commit be2657752e9e ("mm: memcg: fix use after free in
mem_cgroup_iter()").
I work with android kernel tree (4.9 & 4.14), and commit be2657752e9e
("mm: memcg: fix use after free in mem_cgroup_iter()") has been merged
to the trees. However, I can still observe use after free issues
addressed in the commit be2657752e9e. (on low-end devices, a few times
this month)
In the reclaim path, try_to_free_pages() does not setup
sc.target_mem_cgroup and sc is passed to do_try_to_free_pages(), ...,
shrink_node().
In mem_cgroup_iter(), root is set to root_mem_cgroup because
sc->target_mem_cgroup is NULL. It is possible to assign a memcg to
root_mem_cgroup.nodeinfo.iter in mem_cgroup_iter().
My device uses memcg non-hierarchical mode. When we release a memcg:
invalidate_reclaim_iterators() reaches only dead_memcg and its parents.
If non-hierarchical mode is used, invalidate_reclaim_iterators() never
reaches root_mem_cgroup.
The setsockopt() would allocate compound pages (16 pages in this test)
for packet tx ring, then the mmap() would call packet_mmap() to map the
pages into the user address space specified by the mmap() call.
When calling mbind(), it would scan the vma to queue the pages for
migration to the new node. It would split any huge page since 4.9
doesn't support THP migration, however, the packet tx ring compound
pages are not THP and even not movable. So, the above bug is triggered.
However, the later kernel is not hit by this issue due to commit d44d363f6578 ("mm: don't assume anonymous pages have SwapBacked flag"),
which just removes the PageSwapBacked check for a different reason.
But, there is a deeper issue. According to the semantic of mbind(), it
should return -EIO if MPOL_MF_MOVE or MPOL_MF_MOVE_ALL was specified and
MPOL_MF_STRICT was also specified, but the kernel was unable to move all
existing pages in the range. The tx ring of the packet socket is
definitely not movable, however, mbind() returns success for this case.
Although the most socket file associates with non-movable pages, but XDP
may have movable pages from gup. So, it sounds not fine to just check
the underlying file type of vma in vma_migratable().
Change migrate_page_add() to check if the page is movable or not, if it
is unmovable, just return -EIO. But do not abort pte walk immediately,
since there may be pages off LRU temporarily. We should migrate other
pages if MPOL_MF_MOVE* is specified. Set has_unmovable flag if some
paged could not be not moved, then return -EIO for mbind() eventually.
With this change the above test would return -EIO as expected.
When both MPOL_MF_MOVE* and MPOL_MF_STRICT was specified, mbind() should
try best to migrate misplaced pages, if some of the pages could not be
migrated, then return -EIO.
There are three different sub-cases:
1. vma is not migratable
2. vma is migratable, but there are unmovable pages
3. vma is migratable, pages are movable, but migrate_pages() fails
If #1 happens, kernel would just abort immediately, then return -EIO,
after a7f40cfe3b7a ("mm: mempolicy: make mbind() return -EIO when
MPOL_MF_STRICT is specified").
If #3 happens, kernel would set policy and migrate pages with
best-effort, but won't rollback the migrated pages and reset the policy
back.
Before that commit, they behaves in the same way. It'd better to keep
their behavior consistent. But, rolling back the migrated pages and
resetting the policy back sounds not feasible, so just make #1 behave as
same as #3.
Userspace will know that not everything was successfully migrated (via
-EIO), and can take whatever steps it deems necessary - attempt
rollback, determine which exact page(s) are violating the policy, etc.
Make queue_pages_range() return 1 to indicate there are unmovable pages
or vma is not migratable.
The #2 is not handled correctly in the current kernel, the following
patch will fix it.
When migrating an anonymous private page to a ZONE_DEVICE private page,
the source page->mapping and page->index fields are copied to the
destination ZONE_DEVICE struct page and the page_mapcount() is
increased. This is so rmap_walk() can be used to unmap and migrate the
page back to system memory.
However, try_to_unmap_one() computes the subpage pointer from a swap pte
which computes an invalid page pointer and a kernel panic results such
as:
If you use lseek or similar (e.g. pread) to access a location in a
seq_file file that is within a record, rather than at a record boundary,
then the first read will return the remainder of the record, and the
second read will return the whole of that same record (instead of the
next record). When seeking to a record boundary, the next record is
correctly returned.
This bug was introduced by a recent patch (identified below). Before
that patch, seq_read() would increment m->index when the last of the
buffer was returned (m->count == 0). After that patch, we rely on
->next to increment m->index after filling the buffer - but there was
one place where that didn't happen.
Link: https://lkml.kernel.org/lkml/877e7xl029.fsf@notabene.neil.brown.name/ Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code and interface") Signed-off-by: NeilBrown <neilb@suse.com> Reported-by: Sergei Turchanov <turchanov@farpost.com> Tested-by: Sergei Turchanov <turchanov@farpost.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Markus Elfring <Markus.Elfring@web.de> Cc: <stable@vger.kernel.org> [4.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We erroneously added a check for FW API version 41 before sending
GEO_TX_POWER_LIMIT, but this was already implemented in version 38.
Additionally, it was cherry-picked to older versions, namely 17, 26
and 29, so check for those as well.
Cc: stable@vger.kernel.org Fixes: eca1e56ceedd ("iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT to old firmwares") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Firmware versions before 41 don't support the GEO_TX_POWER_LIMIT
command, and sending it to the firmware will cause a firmware crash.
We allow this via debugfs, so we need to return an error value in case
it's not supported.
This had already been fixed during init, when we send the command if
the ACPI WGDS table is present. Fix it also for the other,
userspace-triggered case.
The index for the elements of the ACPI object we dereference
was static. This means that if we called the function twice
we wouldn't start from 3 again, but rather from the latest
index we reached in the previous call.
This was dutifully reported by KASAN.
Fix this.
Cc: stable@vger.kernel.org Fixes: 6996490501ed ("iwlwifi: mvm: add support for EWRD (Dynamic SAR) ACPI table") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to remember how to unmap a memory (as single or
as page), we maintain a bit per Transmit Buffer (TBs) in
the meta data (structure iwl_cmd_meta).
We maintain a bitmap: 1 bit per TB.
If the TB is set, we will free the memory as a page.
This bitmap was never cleared. Fix this.
Cc: stable@vger.kernel.org Fixes: 3cd1980b0cdf ("iwlwifi: pcie: introduce new tfd and tb formats") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 63d7ef36103d ("mwifiex: Don't abort on small, spec-compliant
vendor IEs") adjusted the ieee_types_vendor_header struct, which
inadvertently messed up the offsets used in
mwifiex_is_wpa_oui_present(). Add that offset back in, mirroring
mwifiex_is_rsn_oui_present().
As it stands, commit 63d7ef36103d breaks compatibility with WPA (not
WPA2) 802.11n networks, since we hit the "info: Disable 11n if AES is
not supported by AP" case in mwifiex_is_network_compatible().
Fixes: 63d7ef36103d ("mwifiex: Don't abort on small, spec-compliant vendor IEs") Cc: <stable@vger.kernel.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit d73eb57b80b (KVM: Boost vCPUs that are delivering interrupts), a
five years old bug is exposed. Running ebizzy benchmark in three 80 vCPUs VMs
on one 80 pCPUs Skylake server, a lot of rcu_sched stall warning splatting
in the VMs after stress testing:
swait_active() sustains to be true before finish_swait() is called in
kvm_vcpu_block(), voluntarily preempted vCPUs are taken into account
by kvm_vcpu_on_spin() loop greatly increases the probability condition
kvm_arch_vcpu_runnable(vcpu) is checked and can be true, when APICv
is enabled the yield-candidate vCPU's VMCS RVI field leaks(by
vmx_sync_pir_to_irr()) into spinning-on-a-taken-lock vCPU's current
VMCS.
This patch fixes it by checking conservatively a subset of events.
Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Marc Zyngier <Marc.Zyngier@arm.com> Cc: stable@vger.kernel.org Fixes: 98f4a1467 (KVM: add kvm_arch_vcpu_runnable() test to kvm_vcpu_on_spin() loop) Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We had a report of a server which did not do a DFS referral
because the session setup Capabilities field was set to 0
(unlike negotiate protocol where we set CAP_DFS). Better to
send it session setup in the capabilities as well (this also
more closely matches Windows client behavior).
Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently we skip SMB2_TREE_CONNECT command when checking during
reconnect because Tree Connect happens when establishing
an SMB session. For SMB 3.0 protocol version the code also calls
validate negotiate which results in SMB2_IOCL command being sent
over the wire. This may deadlock on trying to acquire a mutex when
checking for reconnect. Fix this by skipping SMB2_IOCL command
when doing the reconnect check.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"As of now dax_layout_busy_page() calls unmap_mapping_range() with last
argument as 1, which says even unmap cow pages. I am wondering who needs
to get rid of cow pages as well.
I noticed one interesting side affect of this. I mount xfs with -o dax and
mmaped a file with MAP_PRIVATE and wrote some data to a page which created
cow page. Then I called fallocate() on that file to zero a page of file.
fallocate() called dax_layout_busy_page() which unmapped cow pages as well
and then I tried to read back the data I wrote and what I get is old
data from persistent memory. I lost the data I had written. This
read basically resulted in new fault and read back the data from
persistent memory.
This sounds wrong. Are there any users which need to unmap cow pages
as well? If not, I am proposing changing it to not unmap cow pages.
I noticed this while while writing virtio_fs code where when I tried
to reclaim a memory range and that corrupted the executable and I
was running from virtio-fs and program got segment violation."
Dan:
"In fact the unmap_mapping_range() in this path is only to synchronize
against get_user_pages_fast() and force it to call back into the
filesystem to re-establish the mapping. COW pages should be left
untouched by dax_layout_busy_page()."
Cc: <stable@vger.kernel.org> Fixes: 5fac7408d828 ("mm, fs, dax: handle layout changes to pinned dax mappings") Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Link: https://lore.kernel.org/r/20190802192956.GA3032@redhat.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In a very similar spirit to commit c470bdc1aaf3 ("mac80211: don't WARN
on bad WMM parameters from buggy APs"), an AP may not transmit a
fully-formed WMM IE. For example, it may miss or repeat an Access
Category. The above loop won't catch that and will instead leave one of
the four ACs zeroed out. This triggers the following warning in
drv_conf_tx()
wlan0: invalid CW_min/CW_max: 0/0
and it may leave one of the hardware queues unconfigured. If we detect
such a case, let's just print a warning and fall back to the defaults.
Tested with a hacked version of hostapd, intentionally corrupting the
IEs in hostapd_eid_wmm().
A long-time problem on the recent AMD chip (X370, X470, B450, etc with
PCI ID 1022:1457) with Realtek codecs is the crackled or distorted
sound for capture streams, as well as occasional playback hiccups.
After lengthy debugging sessions, the workarounds we've found are like
the following:
- Set up the proper driver caps for this controller, similar as the
other AMD controller.
- Correct the DMA position reporting with the fixed FIFO size, which
is similar like as workaround used for VIA chip set.
- Even after the position correction, PulseAudio still shows
mysterious stalls of playback streams when a capture is triggered in
timer-scheduled mode. Since we have no clear way to eliminate the
stall, pass the BATCH PCM flag for PA to suppress the tsched mode as
a temporary workaround.
This patch implements the workarounds. For the driver caps, it
defines a new preset, AXZ_DCAPS_PRESET_AMD_SB. It enables the FIFO-
corrected position reporting (corresponding to the new position_fix=6)
and enforces the SNDRV_PCM_INFO_BATCH flag.
Note that the current implementation is merely a workaround.
Hopefully we'll find a better alternative in future, especially about
removing the BATCH flag hack again.
The commit bfcba288b97f ("ALSA - hda: Add support for link audio time
reporting") introduced the conditional PCM hw info setup, but it
overwrites the global azx_pcm_hw object. This will cause a problem if
any other HD-audio controller, as it'll inherit the same bit flag
although another controller doesn't support that feature.
Fix the bug by setting the PCM hw info flag locally.
Fixes: bfcba288b97f ("ALSA - hda: Add support for link audio time reporting") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / linux-stable / log