For CONFIG_KALLSYMS, we keep two symbol tables and two string tables.
There's one full copy, marked SHF_ALLOC and laid out at the end of the
module's init section. There's also a cut-down version that only
contains core symbols and strings, and lives in the module's core
section.
After module init (and before we free the module memory), we switch
the mod->symtab, mod->num_symtab and mod->strtab to point to the core
versions. We do this under the module_mutex.
However, kallsyms doesn't take the module_mutex: it uses
preempt_disable() and rcu tricks to walk through the modules, because
it's used in the oops path. It's also used in /proc/kallsyms.
There's nothing atomic about the change of these variables, so we can
get the old (larger!) num_symtab and the new symtab pointer; in fact
this is what I saw when trying to reproduce.
By grouping these variables together, we can use a
carefully-dereferenced pointer to ensure we always get one or the
other (the free of the module init section is already done in an RCU
callback, so that's safe). We allocate the init one at the end of the
module init section, and keep the core one inside the struct module
itself (it could also have been allocated at the end of the module
core, but that's probably overkill).
[ Rebased for 4.4-stable and older, because the following changes aren't
in the older trees:
- e0224418516b4d8a6c2160574bac18447c354ef0: adds arg to is_core_symbol
- 7523e4dc5057e157212b4741abd6256e03404cf1: module_init/module_core/init_size/core_size
become init_layout.base/core_layout.base/init_layout.size/core_layout.size.
]
The test for the qemu q35 south bridge added by commit
"39bfcd52 drm/i915: more virtual south bridge detection"
also matches on real hardware. Having the check for
virtual systems last in the list is not enough to avoid
that ...
Refine the check by additionally verifying the pci
subsystem id to see whenever it *really* is qemu.
Commit "30c964a drm/i915: Detect virtual south bridge" detects and
handles the southbridge emulated by vmware esx. Add the ich9 south
bridge emulated by 'qemu -M q35'.
In the following patch, the way for figuring out
the last bvec will be changed with a bit cost introduced,
so return immediately if the queue doesn't have virt
boundary limit. Actually most of devices have not
this limit.
Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It can be big, depending on the VM address space size, which is tunable
via the vm_size module parameter.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93721 Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In __cpufreq_cooling_register() we allocate the arrays for time_in_idle
and time_in_idle_timestamp to be as big as the number of cpus in this
cpufreq device. However, in get_load() we access this array using the
cpu number as index, which can result in an out of bound access.
Index time_in_idle{,_timestamp} using the index in the cpufreq_device's
allowed_cpus mask, as we do for the load_cpu array in
cpufreq_get_requested_power()
Reported-by: Nicolas Boichat <drinkcat@chromium.org> Cc: Amit Daniel Kachhap <amit.kachhap@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Tested-by: Nicolas Boichat <drinkcat@chromium.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PSL timebase synchronization is seemingly failing for
configuration not including VIRT_CPU_ACCOUNTING_NATIVE. The driver
shows the following trace in dmesg:
PSL: Timebase sync: giving up!
The PSL timebase register is actually syncing correctly, but the cxl
driver is not detecting it. Fix is to use the proper timebase-to-time
conversion.
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Acked-by: Michael Neuling <mikey@neuling.org> Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid sending a partially initialised `siginfo_t' structure along SIGFPE
signals issued from `do_ov' and `do_trap_or_bp', leading to information
leaking from the kernel stack.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In current scache init cache line_size is determined from
cpu config register, however if there there no scache
then mips_sc_probe_cm3 function populates a invalid line_size of 2.
The invalid line_size can cause a NULL pointer deference
during r4k_dma_cache_inv as r4k_blast_scache is populated
based on line_size. Scache line_size of 2 is invalid option in
r4k_blast_scache_setup.
This issue was faced during a MIPS I6400 based virtual platform bring up
where scache was not available in virtual platform model.
Signed-off-by: Govindraj Raja <Govindraj.Raja@imgtec.com> Fixes: 7d53e9c4cd21("MIPS: CM3: Add support for CM3 L2 cache.") Cc: Paul Burton <paul.burton@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hartley <James.Hartley@imgtec.com> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12710/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Parrot NMEA GPS Flight Recorder is a USB composite device
consisting of hub, flash storage, and cp210x usb to serial chip.
It is an accessory to the mass-produced Parrot AR Drone 2.
The device emits standard NMEA messages which make the it compatible
with NMEA compatible software. It was tested using gpsd version 3.11-3
as an NMEA interpreter and using the official Parrot Flight Recorder.
If we use USB ID pin as wakeup source, and there is a USB block
device on this USB OTG (ID) cable, the system will be deadlock
after system resume.
The root cause for this problem is: the workqueue ci_otg may try
to remove hcd before the driver resume has finished, and hcd will
disconnect the device on it, then, it will call device_release_driver,
and holds the device lock "dev->mutex", but it is never unlocked since
it waits workqueue writeback to run to flush the block information, but
the workqueue writeback is freezable, it is not thawed before driver
resume has finished.
When the driver (device: sd 0:0:0:0:) resume goes to dpm_complete, it
tries to get its device lock "dev->mutex", but it can't get it forever,
then the deadlock occurs. Below call stacks show the situation.
So, in order to fix this problem, we need to change workqueue ci_otg
as freezable, then the work item in this workqueue will be run after
driver's resume, this workqueue will not be blocked forever like above
case since the workqueue writeback has been thawed too.
The timer user status compat ioctl returned the bogus struct used for
64bit architectures instead of the 32bit one. This patch addresses
it to return the proper struct.
HDSPM driver contains a code issuing zero-division potentially in
system sample rate ctl code. This patch fixes it by not processing
a zero or invalid rate value as a divisor, as well as excluding the
invalid value to be passed via the given ctl element.
The OSS sequencer client tries to drain the pending events at
releasing. Unfortunately, as spotted by syzkaller fuzzer, this may
lead to an unkillable process state when the event has been queued at
the far future. Since the process being released can't be signaled
any longer, it remains and waits for the echo-back event in that far
future.
Back to history, the draining feature was implemented at the time we
misinterpreted POSIX definition for blocking file operation.
Actually, such a behavior is superfluous at release, and we should
just release the device as is instead of keeping it up forever.
This patch just removes the draining call that may block the release
for too long time unexpectedly.
X32 ABI uses the 64bit timespec in addition to 64bit alignment of
64bit values. This leads to incompatibilities in some PCM ioctls
involved with snd_pcm_channel_info, snd_pcm_status and
snd_pcm_sync_ptr structs. Fix the PCM compat ABI for these ioctls
like the previous commit for ctl API.
X32 ABI takes the 64bit timespec, thus the timer user status ioctl becomes
incompatible with IA32. This results in NOTTY error when the ioctl is
issued.
Meanwhile, this struct in X32 is essentially identical with the one in
X86-64, so we can just bypassing to the existing code for this
specific compat ioctl.
Like the previous fixes for ctl and PCM, we need a fix for
incompatible X32 ABI regarding the rawmidi: namely, struct
snd_rawmidi_status has the timespec, and the size and the alignment on
X32 differ from IA32.
This patch applies the microphone-related fix created for the Acer
Aspire E1-572 to the E1-472 as well, as it uses the same Realtek ALC282
CODEC and demonstrates the same issues.
This patch allows an external, headset microphone to be used and limits
the gain on the (quite noisy) internal microphone.
Signed-off-by: Simon South <simon@simonsouth.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The X32 ABI takes the same alignment like x86-64, and this may result
in the incompatible struct size from ia32. Unfortunately, we hit this
in some control ABI: struct snd_ctl_elem_value differs between them
due to the position of 64bit variable array. This ends up with the
unknown ioctl (ENOTTY) error.
The fix is to add the compat entries for the new aligned struct.
Plantronics DA45 does not support reading the sample rate which leads
to many lines of "cannot get freq at ep 0x4" and "cannot get freq at
ep 0x84". This patch adds the USB ID of the DA45 to quirks.c and
avoids those error messages.
The 5 volt detect functionality broke in 3.14: the code reads IO register 0x70
again after it has already been cleared. Instead it should use the cached
irq_reg_0x70 value and the io_write to 0x71 to clear 0x70 can be dropped since
this has already been done.
While testing audio with pxa2xx-ac97, underrun were happening while the
user application was correctly feeding the music. Debug proved that the
cyclic transfer is not cyclic, ie. the last descriptor did not loop on
the first.
Another issue is that the descriptor length was always set to 8192,
because of an trivial operator issue.
When a directory is deleted, we don't take too much care about killing off
all the dirents that belong to it — on the basis that on remount, the scan
will conclude that the directory is dead anyway.
This doesn't work though, when the deleted directory contained a child
directory which was moved *out*. In the early stages of the fs build
we can then end up with an apparent hard link, with the child directory
appearing both in its true location, and as a child of the original
directory which are this stage of the mount process we don't *yet* know
is defunct.
To resolve this, take out the early special-casing of the "directories
shall not have hard links" rule in jffs2_build_inode_pass1(), and let the
normal nlink processing happen for directories as well as other inodes.
Then later in the build process we can set ic->pino_nlink to the parent
inode#, as is required for directories during normal operaton, instead
of the nlink. And complain only *then* about hard links which are still
in evidence even after killing off all the unreachable paths.
Reported-by: Liu Song <liu.song11@zte.com.cn> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With this fix, all code paths should now be obtaining the page lock before
f->sem.
Reported-by: Szabó Tamás <sztomi89@gmail.com> Tested-by: Thomas Betker <thomas.betker@rohde-schwarz.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 5ffd3412ae55
("jffs2: Fix lock acquisition order bug in jffs2_write_begin").
The commit modified jffs2_write_begin() to remove a deadlock with
jffs2_garbage_collect_live(), but this introduced new deadlocks found
by multiple users. page_lock() actually has to be called before
mutex_lock(&c->alloc_sem) or mutex_lock(&f->sem) because
jffs2_write_end() and jffs2_readpage() are called with the page locked,
and they acquire c->alloc_sem and f->sem, resp.
In other words, the lock order in jffs2_write_begin() was correct, and
it is the jffs2_garbage_collect_live() path that has to be changed.
Revert the commit to get rid of the new deadlocks, and to clear the way
for a better fix of the original deadlock.
Reported-by: Deng Chao <deng.chao1@zte.com.cn> Reported-by: Ming Liu <liu.ming50@gmail.com> Reported-by: wangzaiwei <wangzaiwei@top-vision.cn> Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When looking for orphan roots during mount we can end up hitting a
BUG_ON() (at root-item.c:btrfs_find_orphan_roots()) if a log tree is
replayed and qgroups are enabled. This is because after a log tree is
replayed, a transaction commit is made, which triggers qgroup extent
accounting which in turn does backref walking which ends up reading and
inserting all roots in the radix tree fs_info->fs_root_radix, including
orphan roots (deleted snapshots). So after the log tree is replayed, when
finding orphan roots we hit the BUG_ON with the following trace:
So fix this by not treating the error -EEXIST, returned when attempting
to insert a root already inserted by the backref walking code, as an error.
The following test case for xfstests reproduces the bug:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
_cleanup_flakey
cd /
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
. ./common/dmflakey
# real QA test starts here
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_dm_target flakey
_require_metadata_journaling $SCRATCH_DEV
# Create 2 directories with one file in one of them.
# We use these just to trigger a transaction commit later, moving the file from
# directory a to directory b and doing an fsync against directory a.
mkdir $SCRATCH_MNT/a
mkdir $SCRATCH_MNT/b
touch $SCRATCH_MNT/a/f
sync
# Create a snapshot and delete it. This doesn't really delete the snapshot
# immediately, just makes it inaccessible and invisible to user space, the
# snapshot is deleted later by a dedicated kernel thread (cleaner kthread)
# which is woke up at the next transaction commit.
# A root orphan item is inserted into the tree of tree roots, so that if a
# power failure happens before the dedicated kernel thread does the snapshot
# deletion, the next time the filesystem is mounted it resumes the snapshot
# deletion.
_run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap
_run_btrfs_util_prog subvolume delete $SCRATCH_MNT/snap
# Now overwrite half of the extents we wrote before. Because we made a snapshpot
# before, which isn't really deleted yet (since no transaction commit happened
# after we did the snapshot delete request), the non overwritten extents get
# referenced twice, once by the default subvolume and once by the snapshot.
$XFS_IO_PROG -c "pwrite -S 0xbb 4K 8K" $SCRATCH_MNT/foobar | _filter_xfs_io
# Now move file f from directory a to directory b and fsync directory a.
# The fsync on the directory a triggers a transaction commit (because a file
# was moved from it to another directory) and the file fsync leaves a log tree
# with file extent items to replay.
mv $SCRATCH_MNT/a/f $SCRATCH_MNT/a/b
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/a
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foobar
echo "File digest before power failure:"
md5sum $SCRATCH_MNT/foobar | _filter_scratch
# Now simulate a power failure and mount the filesystem to replay the log tree.
# After the log tree was replayed, we used to hit a BUG_ON() when processing
# the root orphan item for the deleted snapshot. This is because when processing
# an orphan root the code expected to be the first code inserting the root into
# the fs_info->fs_root_radix radix tree, while in reallity it was the second
# caller attempting to do it - the first caller was the transaction commit that
# took place after replaying the log tree, when updating the qgroup counters.
_flakey_drop_and_remount
echo "File digest before after failure:"
# Must match what he got before the power failure.
md5sum $SCRATCH_MNT/foobar | _filter_scratch
_unmount_flakey
status=0
exit
Fixes: 2d9e97761087 ("Btrfs: use btrfs_get_fs_root in resolve_indirect_ref") Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The RB532 platform specific irq_to_gpio() implementation has been
removed with commit 832f5dacfa0b ("MIPS: Remove all the uses of
custom gpio.h"). Now the platform uses the generic stub which causes
the following error:
pata-rb532-cf pata-rb532-cf: no GPIO found for irq149
pata-rb532-cf: probe of pata-rb532-cf failed with error -2
Drop the irq_to_gpio() call and get the GPIO number from platform
data instead. After this change, the driver works again:
scsi host0: pata-rb532-cf
ata1: PATA max PIO4 irq 149
ata1.00: CFA: CF 1GB, 20080820, max MWDMA4
ata1.00: 1989792 sectors, multi 0: LBA
ata1.00: configured for PIO4
scsi 0:0:0:0: Direct-Access ATA CF 1GB 0820 PQ: 0\
ANSI: 5
sd 0:0:0:0: [sda] 1989792 512-byte logical blocks: (1.01 GB/971 MiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't\
support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
Fixes: 832f5dacfa0b ("MIPS: Remove all the uses of custom gpio.h") Cc: Alban Bedel <albeu@free.fr> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 9f61668073a8d "tracing: Allow triggers to filter for CPU ids and
process names" added a 'comm' filter that will filter events based on the
current tasks struct 'comm'. But this now hides the ability to filter events
that have a 'comm' field too. For example, sched_migrate_task trace event.
That has a 'comm' field of the task to be migrated.
will now filter all sched_migrate_task events for tasks named "bash" that
migrates other tasks (in interrupt context), instead of seeing when "bash"
itself gets migrated.
This fix requires a couple of changes.
1) Change the look up order for filter predicates to look at the events
fields before looking at the generic filters.
2) Instead of basing the filter function off of the "comm" name, have the
generic "comm" filter have its own filter_type (FILTER_COMM). Test
against the type instead of the name to assign the filter function.
3) Add a new "COMM" filter that works just like "comm" but will filter based
on the current task, even if the trace event contains a "comm" field.
Do the same for "cpu" field, adding a FILTER_CPU and a filter "CPU".
Fixes: 9f61668073a8d "tracing: Allow triggers to filter for CPU ids and process names" Reported-by: Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The HPCP bit is set by bioses for on-board sata ports either because
they think sata is hotplug capable in general or to allow Windows
to display a "device eject" icon on ports which are routed to an
external connector bracket.
However in Redhat Bugzilla #1310682, users report that with kernel 4.4,
where this bit test first appeared, a lot of partitions on sata drives
are now mounted automatically.
This patch should fix redhat and a lot of other distros which
unconditionally automount all devices which have the "removable"
bit set.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: 8a3e33cf92c7 ("ata: ahci: find eSATA ports and flag them as removable" changes userspace behavior) Link: http://lkml.kernel.org/g/56CF35FA.1070500@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pause/unpause graph tracing around do_suspend_lowlevel as it has
inconsistent call/return info after it jumps to the wakeup vector.
The graph trace buffer will otherwise become misaligned and
may eventually crash and hang on suspend.
To reproduce the issue and test the fix:
Run a function_graph trace over suspend/resume and set the graph
function to suspend_devices_and_enter. This consistently hangs the
system without this fix.
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit dd006da21646 ("arm64: mm: increase VA range of identity map") made
some changes to the memory mapping code to allow physical memory to reside
at an offset that exceeds the size of the virtual mapping.
However, since the size of the vmemmap area is proportional to the size of
the VA area, but it is populated relative to the physical space, we may
end up with the struct page array being mapped outside of the vmemmap
region. For instance, on my Seattle A0 box, I can see the following output
in the dmesg log.
We can fix this by deciding that the vmemmap region is not a projection of
the physical space, but of the virtual space above PAGE_OFFSET, i.e., the
linear region. This way, we are guaranteed that the vmemmap region is of
sufficient size, and we can even reduce the size by half.
If cgroup writeback is in use, inodes can be scheduled for
asynchronous wb switching. Before 5ff8eaac1636 ("writeback: keep
superblock pinned during cgroup writeback association switches"), this
could race with umount leading to super_block being destroyed while
inodes are pinned for wb switching. 5ff8eaac1636 fixed it by bumping
s_active while wb switches are in flight; however, this allowed
in-flight wb switches to make umounts asynchronous when the userland
expected synchronosity - e.g. fsck immediately following umount may
fail because the device is still busy.
This patch removes the problematic super_block pinning and instead
makes generic_shutdown_super() flush in-flight wb switches. wb
switches are now executed on a dedicated isw_wq so that they can be
flushed and isw_nr_in_flight keeps track of the number of in-flight wb
switches so that flushing can be avoided in most cases.
v2: Move cgroup_writeback_umount() further below and add MS_ACTIVE
check in inode_switch_wbs() as Jan an Al suggested.
Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Tahsin Erdogan <tahsin@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@ZenIV.linux.org.uk> Link: http://lkml.kernel.org/g/CAAeU0aNCq7LGODvVGRU-oU_o-6enii5ey0p1c26D1ZzYwkDc5A@mail.gmail.com Fixes: 5ff8eaac1636 ("writeback: keep superblock pinned during cgroup writeback association switches") Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The id buffer in ata_device is a DMA target, but it isn't explicitly
cacheline aligned. Due to this, adjacent fields can be overwritten with
stale data from memory on non coherent architectures. As a result, the
kernel is sometimes unable to communicate with an ATA device.
Fix this by ensuring that the id buffer is cacheline aligned.
This issue is similar to that fixed by Commit 84bda12af31f
("libata: align ap->sector_buf").
As reported by Soohoon Lee, the HDIO_GET_32BIT ioctl does not
work correctly in compat mode with libata.
I have investigated the issue further and found multiple problems
that all appeared with the same commit that originally introduced
HDIO_GET_32BIT handling in libata back in linux-2.6.8 and presumably
also linux-2.4, as the code uses "copy_to_user(arg, &val, 1)" to copy
a 'long' variable containing either 0 or 1 to user space.
The problems with this are:
* On big-endian machines, this will always write a zero because it
stores the wrong byte into user space.
* In compat mode, the upper three bytes of the variable are updated
by the compat_hdio_ioctl() function, but they now contain
uninitialized stack data.
* The hdparm tool calling this ioctl uses a 'static long' variable
to store the result. This means at least the upper bytes are
initialized to zero, but calling another ioctl like HDIO_GET_MULTCOUNT
would fill them with data that remains stale when the low byte
is overwritten. Fortunately libata doesn't implement any of the
affected ioctl commands, so this would only happen when we query
both an IDE and an ATA device in the same command such as
"hdparm -N -c /dev/hda /dev/sda"
* The libata code for unknown reasons started using ATA_IOC_GET_IO32
and ATA_IOC_SET_IO32 as aliases for HDIO_GET_32BIT and HDIO_SET_32BIT,
while the ioctl commands that were added later use the normal
HDIO_* names. This is harmless but rather confusing.
This addresses all four issues by changing the code to use put_user()
on an 'unsigned long' variable in HDIO_GET_32BIT, like the IDE subsystem
does, and by clarifying the names of the ioctl commands.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Soohoon Lee <Soohoon.Lee@f5.com> Tested-by: Soohoon Lee <Soohoon.Lee@f5.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In amdgpu_connector_hotplug(), we need to start DP link
training only after we have received DPCD. The function
amdgpu_atombios_dp_get_dpcd() returns non-zero value only
when an error condition is met, otherwise returns zero.
So in case the function encounters an error, we need to
skip rest of the code and return from amdgpu_connector_hotplug()
immediately. Only when we are successfull in reading DPCD
pin, we should carry on with turning-on the monitor.
We never ported that back to CIK, so we could run into VM faults here.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On CI, we need to see if the number of crtcs changes to determine
whether or not we need to upload the mclk table again. In practice
we don't currently upload the mclk table again after the initial load.
The only reason you would would be to add new states, e.g., for
arbitrary mclk setting which is not currently supported.
Acked-by: Jordan Lazare <Jordan.Lazare@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On CI, we need to see if the number of crtcs changes to determine
whether or not we need to upload the mclk table again. In practice
we don't currently upload the mclk table again after the initial load.
The only reason you would would be to add new states, e.g., for
arbitrary mclk setting which is not currently supported.
Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During DRAM initialization on certain ASpeed devices, an incorrect
bit (bit 10) was checked in the "SDRAM Bus Width Status" register
to determine DRAM width.
Query bit 6 instead in accordance with the Aspeed AST2050 datasheet v1.05.
In a couple places we are not converting to/from the Linux
block layer 512 bytes sectors.
1.
The request queue values and what we do are a mismatch of
things:
max_discard_sectors - This is in linux block layer 512 byte
sectors. We are just copying this to max_unmap_lba_count.
discard_granularity - This is in bytes. We are converting it
to Linux block layer 512 byte sectors.
discard_alignment - This is in bytes. We are just copying
this over.
The problem is that the core LIO code exports these values in
spc_emulate_evpd_b0 and we use them to test request arguments
in sbc_execute_unmap, but we never convert to the block size
we export to the initiator. If we are not using 512 byte sectors
then we are exporting the wrong values or are checks are off.
And, for the discard_alignment/bytes case we are just plain messed
up.
2.
blkdev_issue_discard's start and number of sector arguments
are supposed to be in linux block layer 512 byte sectors. We are
currently passing in the values we get from the initiator which
might be based on some other sector size.
There is a similar problem in iblock_execute_write_same where
the bio functions want values in 512 byte sectors but we are
passing in what we got from the initiator.
Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
[ kamal: backport to 4.4-stable: no unmap_zeroes_data ] Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the PCI hotplug path of the Intel IOMMU driver, replace
the usage of the BUS_NOTIFY_DEL_DEVICE notifier, which is
executed before the driver is unbound from the device, with
BUS_NOTIFY_REMOVED_DEVICE, which runs after that.
This fixes a kernel BUG being triggered in the VT-d code
when the device driver tries to unmap DMA buffers and the
VT-d driver already destroyed all mappings.
The setup code for the performance counters in the AMD IOMMU driver
tests whether the counters can be written. It tests to setup a counter
for device 00:00.0, which fails on systems where this particular device
is not covered by the IOMMU.
Fix this by not relying on device 00:00.0 but only on the IOMMU being
present.
The AMD Family 15h Models 30h-3Fh (Kaveri) BIOS and Kernel Developer's
Guide omitted part of the BIOS IOMMU L2 register setup specification.
Without this setup the IOMMU L2 does not fully respect write permissions
when handling an ATS translation request.
The IOMMU L2 will set PTE dirty bit when handling an ATS translation with
write permission request, even when PTE RW bit is clear. This may occur by
direct translation (which would cause a PPR) or by prefetch request from
the ATC.
This is observed in practice when the IOMMU L2 modifies a PTE which maps a
pagecache page. The ext4 filesystem driver BUGs when asked to writeback
these (non-modified) pages.
Enable ATS write permission check in the Kaveri IOMMU L2 if BIOS has not.
Calling return copy_to_user(...) in an ioctl will not
do the right thing if there's a pagefault:
copy_to_user returns the number of bytes not copied
in this case.
Fix up kvm to do
return copy_to_user(...)) ? -EFAULT : 0;
everywhere.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 172b2386ed16 ("KVM: x86: fix missed hardware breakpoints",
2016-02-10) worked around a case where the debug registers are not loaded
correctly on preemption and on the first entry to KVM_RUN.
However, Xiao Guangrong pointed out that the root cause must be that
KVM_DEBUGREG_BP_ENABLED is not being set correctly. This can indeed
happen due to the lazy debug exit mechanism, which does not call
kvm_update_dr7. Fix it by replacing the existing loop (more or less
equivalent to kvm_update_dr0123) with calls to all the kvm_update_dr*
functions.
Calling return copy_to_user(...) in an ioctl will not
do the right thing if there's a pagefault:
copy_to_user returns the number of bytes not copied
in this case.
Fix up vfio to do
return copy_to_user(...)) ?
-EFAULT : 0;
everywhere.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This issue is caused by commit 02323db17e3a7 ("cifs: fix
cifs_uniqueid_to_ino_t not to ever return 0"), when BITS_PER_LONG
is 64 on s390x, the corresponding cifs_uniqueid_to_ino_t()
function will cast 64-bit fileid to 32-bit by using (ino_t)fileid,
because ino_t (typdefed __kernel_ino_t) is int type.
It's defined in arch/s390/include/uapi/asm/posix_types.h
#ifndef __s390x__
typedef unsigned long __kernel_ino_t;
...
#else /* __s390x__ */
typedef unsigned int __kernel_ino_t;
So the #ifdef condition is wrong for s390x, we can just still use
one cifs_uniqueid_to_ino_t() function with comparing sizeof(ino_t)
and sizeof(u64) to choose the correct execution accordingly.
Signed-off-by: Yadan Fan <ydfan@suse.com> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For interim responses we only need to parse a header and update
a number credits. Now it is done for all SMB2+ command except
SMB2_READ which is wrong. Fix this by adding such processing.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Tested-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When opening a file, SMB2_open() attempts to parse the lease state from the
SMB2 CREATE Response. However, the parsing code was not careful to ensure
that the create contexts are not empty or invalid, which can lead to out-
of-bounds memory access. This can be seen easily by trying
to read a file from a OSX 10.11 SMB3 server. Here is sample crash output:
two attempts have been made at fixing a possible hang caused by
cursor_timer_handler. That function registers a timer to be triggered at
"jiffies + fbcon_ops.cur_blink_jiffies".
A new case had been encountered during initialisation of clcd-pl11x:
If we take an softirq anywhere between A and B (and we do),
cursor_timer_handler executes indefinitely.
Instead of patching all possible paths that lead to this case one at a
time, fix the issue at the source and initialise cur_blink_jiffies to
200ms when allocating fbcon_ops. This was its default value before
aforesaid commit. fbcon_cursor or fbcon_init will refine this value
downstream.
vmx.c writes the TSC_MULTIPLIER field in vmx_vcpu_load, but only when a
vcpu has migrated physical cpus. Record the last value written and
update in vmx_vcpu_load on any change, otherwise a cpu migration must
occur for TSC frequency scaling to take effect.
Returning directly whatever copy_to_user(...) or copy_from_user(...)
returns may not do the right thing if there's a pagefault:
copy_to_user/copy_from_user return the number of bytes not copied in
this case, but ioctls need to return -EFAULT instead.
Fix up kvm on mips to do
return copy_to_user(...)) ? -EFAULT : 0;
and
return copy_from_user(...)) ? -EFAULT : 0;
everywhere.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Frysinger reported that his ptrace testcase showed strange
behaviour on parisc: It was not possible to avoid a syscall and the
return value of a syscall couldn't be changed.
To modify a syscall number, we were missing to save the new syscall
number to gr20 which is then picked up later in assembly again.
The effect that the return value couldn't be changed is a side-effect of
another bug in the assembly code. When a process is ptraced, userspace
expects each syscall to report entrance and exit of a syscall. If a
syscall number was given which doesn't exist, we jumped to the normal
syscall exit code instead of informing userspace that the (non-existant)
syscall exits. This unexpected behaviour confuses userspace and thus the
bug was misinterpreted as if we can't change the return value.
This patch fixes both problems and was tested on 64bit kernel with
32bit userspace.
Signed-off-by: Helge Deller <deller@gmx.de> Cc: Mike Frysinger <vapier@gentoo.org> Tested-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit cbce7900598c ("PCI: designware: Make driver arch-agnostic") changed
the host bridge sysdata pointer from the ARM pci_sys_data to the DesignWare
pcie_port structure, and changed pcie-designware.c to reflect that. But it
did not change the corresponding code in pci-keystone-dw.c, so it caused
crashes on Keystone:
Unable to handle kernel NULL pointer dereference at virtual address 00000030
pgd = c0003000
[00000030] *pgd=80000800004003, *pmd=00000000
Internal error: Oops: 206 [#1] PREEMPT SMP ARM
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.2-00139-gb74f926 #2
Hardware name: Keystone
PC is at ks_dw_pcie_msi_irq_unmask+0x24/0x58
Change pci-keystone-dw.c to expect sysdata to be the struct pcie_port
pointer.
Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parameter of trace_btrfs_work_queued() can be freed in its workqueue.
So no one use use that pointer after queue_work().
Fix the user-after-free bug by move the trace line before queue_work().
Reported-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I see no_space in v4.4-rc1 again in xfstests generic/102.
It happened randomly in some node only.
(one of 4 phy-node, and a kvm with non-virtio block driver)
By bisect, we can found the first-bad is:
commit bdced438acd8 ("block: setup bi_phys_segments after splitting")'
But above patch only triggered the bug by making bio operation
faster(or slower).
Main reason is in our space_allocating code, we need to commit
page writeback before wait it complish, this patch fixed above
bug.
BTW, there is another reason for generic/102 fail, caused by
disable default mixed-blockgroup, I'll fix it in xfstests.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This happens because we can recursively acquire the semaphore
fs_info->delayed_iput_sem when attempting to allocate space to satisfy
a file write request as shown in the first trace above - when committing
a transaction we acquire (down_read) the semaphore before running the
delayed iputs, and when running a delayed iput() we can end up calling
an inode's eviction handler, which in turn commits another transaction
and attempts to acquire (down_read) again the semaphore to run more
delayed iput operations.
This results in a deadlock because if a task acquires multiple times a
semaphore it should invoke down_read_nested() with a different lockdep
class for each level of recursion.
Fix this by simplifying the implementation and use a mutex instead that
is acquired by the cleaner kthread before it runs the delayed iputs
instead of always acquiring a semaphore before delayed references are
run from anywhere.
Fixes: d7c151717a1e (btrfs: Fix NO_SPACE bug caused by delayed-iput) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_ARCH_SHMOBILE is not only enabled for Renesas ARM platforms
(which are DT based and multi-platform), but also on a select set of
Renesas SuperH platforms (SH7722/SH7723/SH7724/SH7343/SH7366). Hence
since commit 0ba58de231066e47 ("drivers: sh: Get rid of
CONFIG_ARCH_SHMOBILE_MULTI"), the legacy clock domain is no longer
installed on these SuperH platforms, and module clocks may not be
enabled when needed, leading to driver failures.
To fix this, add an additional check for CONFIG_OF.
Fixes: 0ba58de231066e47 ("drivers: sh: Get rid of CONFIG_ARCH_SHMOBILE_MULTI"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Games with ordering and barriers are way too brittle. Just
bump ->d_seq before and after updating ->d_inode and ->d_flags
type bits, so that verifying ->d_seq would guarantee they are
coherent.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The firmware can perform a scheduled scan with not matchsets passed,
but it can't send notification that results were found. Since the
userspace then cannot know when we got new results and the firmware
wouldn't trigger a wake in case we are sleeping, it's better not to
allow scans without matchsets.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=110831
8000 device family has a new debug engine that needs to be
configured differently than 7000's.
The debug engine's DMA works in chunks of memory and the
size of the buffer really means the start of the last
chunk. Since one chunk is 256-byte long, we should
configure the device to write to buffer_size - 256.
This fixes a situation were the device would write to
memory it is not allowed to access.
My commit below introduced a mutex in the transport to
prevent concurrent operations. To do so, it added a flag
(is_down) to make sure the transport is in the right state.
This uncoverred an bug that didn't cause any harm until
now: iwldvm calls stop_device and then starts the firmware
without calling start_hw in between. While this flow is
fine from the device configuration point of view (register,
etc...), it is now forbidden by the new is_down flag.
This led to this error to appear:
iwlwifi 0000:05:00.0: Can't start_fw since the HW hasn't been started
and the suspend would fail.
This fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=109591
It looks like smack and yama weren't aware that the ptrace mode
can have flags ORed into it - PTRACE_MODE_NOAUDIT until now, but
only for /proc/$pid/stat, and with the PTRACE_MODE_*CREDS patch,
all modes have flags ORed into them.
Signed-off-by: Jann Horn <jann@thejh.net> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cma_validate_port wrongly assumed that Ethernet devices are RoCE
devices and thus their ndev should be matched in the GID table.
This broke the iWarp support. Fixing that matching the ndev only if
we work on a RoCE port.
Cc: <stable@vger.kernel.org> # 4.4.x- Fixes: abae1b71dd37 ('IB/cma: cma_validate_port should verify the port
and netdevice') Reported-by: Hariprasad Shenai <hariprasad@chelsio.com> Tested-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
So we need to serialize the vector assignment against a pending cleanup. The
solution is rather simple now. We not only check for the move_in_progress flag
in assign_irq_vector(), we also check whether there is still a cleanup pending
in the old_domain cpumask. If so, we return -EBUSY to the caller and let him
deal with it. Though we have to be careful in the cpu unplug case. If the
cleanout has not yet completed then the following setaffinity() call would
return -EBUSY. Add code which prevents this.
Full context is here: http://lkml.kernel.org/r/5653B688.4050809@stratus.com
Reported-and-tested-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160107.207265407@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
First of all there is no point in looking up the irq descriptor again, but we
also need the descriptor for the final cleanup race fix in the next
patch. Make that change seperate. No functional difference.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160107.125211743@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to allocate a new cpumask for sending the cleanup vector. The
old_domain mask is now protected by the vector_lock, so we can safely remove
the offline cpus from it and send the IPI with the resulting mask.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160106.967993932@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
send_cleanup_vector() fiddles with the old_domain mask unprotected because it
relies on the protection by the move_in_progress flag. But this is fatal, as
the flag is reset after the IPI has been sent. So a cpu which receives the IPI
can still see the flag set and therefor ignores the cleanup request. If no
other cleanup request happens then the vector stays stale on that cpu and in
case of an irq removal the vector still persists. That can lead to use after
free when the next cleanup IPI happens.
Protect the code with vector_lock and clear move_in_progress before sending
the IPI.
This does not plug the race which Joe reported because:
In the case that the new vector mask is a subset of the existing mask there is
no point to do a AND operation of currentmask & newmask. The result is
newmask. So we can simply copy the new mask to the current mask and be done
with it. Preparatory patch for further consolidation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160106.640253454@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__assign_irq_vector() uses the vector_cpumask which is assigned by
apic->vector_allocation_domain() without doing basic sanity checks. That can
result in a situation where the final assignement of a newly found vector
fails in apic->cpu_mask_to_apicid_and(). So we have to do rollbacks for no
reason.
Check for this condition right away and if the result is empty try immediately
the next possible cpu in the requested mask. So in case of a failure the old
setting is unchanged and we can remove the rollback code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160106.561877324@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Split out the code which advances the target cpu for the search so we can
reuse it for the next patch which adds an early validation check for the
vectormask which we get from the apic.
Add comments while at it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160106.484562040@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function __assign_irq_vector() makes use of apic_chip_data.old_domain as a
temporary buffer, which is in the way of using apic_chip_data.old_domain for
synchronizing the vector cleanup with the vector assignement code.
Use a proper temporary cpumask for this.
[ tglx: Renamed the mask to searched_cpumask for clarity ]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/1450880014-11741-1-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In fixup_irqs() we unconditionally dereference the irq chip of an irq
descriptor. The descriptor might still be valid, but already cleaned up,
i.e. the chip removed. Add a check for this condition.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/20151231160106.236423282@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86_vector_free_irqs()
{
free_apic_chip_data(irq_data->chip_data);
xxxxx //irq_data->chip_data has been freed, but the pointer
//hasn't been reset yet
irq_domain_reset_irq_data(irq_data);
}
and
smp_irq_move_cleanup_interrupt()
{
raw_spin_lock(&vector_lock);
data = apic_chip_data(irq_desc_get_irq_data(desc));
access data->xxxx // may access freed memory
raw_spin_unlock(&desc->lock);
}
which may cause smp_irq_move_cleanup_interrupt() to access freed memory.
Call irq_domain_reset_irq_data(), which clears the pointer with vector lock
held.
[ tglx: Free memory outside of lock held region. ]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: andy.shevchenko@gmail.com Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/1450880014-11741-3-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the unlikely event that regno == nr_registers then we get an array
overrun on regoff because the invalid register check is currently
off-by-one. Fix this with a check that regno is >= nr_registers instead.
Detected with static analysis using CoverityScan.
Fixes: fcc7ffd67991 "x86, mpx: Decode MPX instruction to get bound violation information" Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Link: http://lkml.kernel.org/r/1456512931-3388-1-git-send-email-colin.king@canonical.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The delete opration can allocate additional space on the HPFS filesystem
due to btree split. The HPFS driver checks in advance if there is
available space, so that it won't corrupt the btree if we run out of space
during splitting.
If there is not enough available space, the HPFS driver attempted to
truncate the file, but this results in a deadlock since the commit 7dd29d8d865efdb00c0542a5d2c87af8c52ea6c7 ("HPFS: Introduce a global mutex
and lock it on every callback from VFS").
This patch removes the code that tries to truncate the file and -ENOSPC is
returned instead. If the user hits -ENOSPC on delete, he should try to
delete other files (that are stored in a leaf btree node), so that the
delete operation will make some space for deleting the file stored in
non-leaf btree node.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / linux-stable / log