Linus Torvalds [Sun, 28 Aug 2016 21:31:36 +0000 (14:31 -0700)]
Merge tag 'drm-fixes-for-4.8-rc4' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"A bunch of fixes covering i915, amdgpu, one tegra and some core DRM
ones. Nothing too strange at this point"
* tag 'drm-fixes-for-4.8-rc4' of git://people.freedesktop.org/~airlied/linux: (21 commits)
drm/atomic: Don't potentially reset color_mgmt_changed on successive property updates.
drm: Protect fb_defio in drivers with CONFIG_KMS_FBDEV_EMULATION
drm/amdgpu: skip TV/CV in display parsing
drm/amdgpu: avoid a possible array overflow
drm/amdgpu: fix lru size grouping v2
drm/tegra: dsi: Enhance runtime power management
drm/i915: Fix botched merge that downgrades CSR versions.
drm/i915/skl: Ensure pipes with changed wms get added to the state
drm/i915/gen9: Only copy WM results for changed pipes to skl_hw
drm/i915/skl: Add support for the SAGV, fix underrun hangs
drm/i915/gen6+: Interpret mailbox error flags
drm/i915: Reattach comment, complete type specification
drm/i915: Unconditionally flush any chipset buffers before execbuf
drm/i915/gen9: Drop invalid WARN() during data rate calculation
drm/i915/gen9: Initialize intel_state->active_crtcs during WM sanitization (v2)
drm: Reject page_flip for !DRIVER_MODESET
drm/amdgpu: fix timeout value check in amd_sched_job_recovery
drm/amdgpu: fix sdma_v2_4_ring_test_ib
drm/amdgpu: fix amdgpu_move_blit on 32bit systems
drm/radeon: fix radeon_move_blit on 32bit systems
...
Mario Kleiner [Fri, 26 Aug 2016 23:02:28 +0000 (01:02 +0200)]
drm/atomic: Don't potentially reset color_mgmt_changed on successive property updates.
Due to assigning the 'replaced' value instead of or'ing it,
if drm_atomic_crtc_set_property() gets called multiple times,
the last call will define the color_mgmt_changed flag, so
a non-updating call to a property can reset the flag and
prevent actual hw state updates required by preceding
property updates.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: <stable@vger.kernel.org> # v4.6+ Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Sun, 28 Aug 2016 17:02:23 +0000 (10:02 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A few fixes from the perf departement
- prevent a imbalanced preemption disable in the events teardown code
- prevent out of bound acces in perf userspace
- make perf tools compile with UCLIBC again
- a fix for the userspace unwinder utility"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Use this_cpu_ptr() when stopping AUX events
perf evsel: Do not access outside hw cache name arrays
tools lib: Reinstate strlcpy() header guard with __UCLIBC__
perf unwind: Use addr_location::addr instead of ip for entries
Linus Torvalds [Sun, 28 Aug 2016 16:52:40 +0000 (09:52 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"This lot provides:
- plug a hotplug race in the new affinity infrastructure
- a fix for the trigger type of chained interrupts
- plug a potential memory leak in the core code
- a few fixes for ARM and MIPS GICs"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips-gic: Implement activate op for device domain
irqchip/mips-gic: Cleanup chip and handler setup
genirq/affinity: Use get/put_online_cpus around cpumask operations
genirq: Fix potential memleak when failing to get irq pm
irqchip/gicv3-its: Disable the ITS before initializing it
irqchip/gicv3: Remove disabling redistributor and group1 non-secure interrupts
irqchip/gic: Allow self-SGIs for SMP on UP configurations
genirq: Correctly configure the trigger on chained interrupts
Linus Torvalds [Sun, 28 Aug 2016 16:03:05 +0000 (09:03 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A few updates for timers & co:
- prevent a livelock in the timekeeping code when debugging is
enabled
- prevent out of bounds access in the timekeeping debug code
- various fixes in clocksource drivers
- a new maintainers entry"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/sun4i: Clear interrupts after stopping timer in probe function
drivers/clocksource/pistachio: Fix memory corruption in init
clocksource/drivers/timer-atmel-pit: Enable mck clock
clocksource/drivers/pxa: Fix include files for compilation
MAINTAINERS: Add ARM ARCHITECTED TIMER entry
timekeeping: Cap array access in timekeeping_debug
timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING
Linus Torvalds [Sat, 27 Aug 2016 22:51:50 +0000 (15:51 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM:
- fixes for ITS init issues, error handling, IRQ leakage, race
conditions
- an erratum workaround for timers
- some removal of misleading use of errors and comments
- a fix for GICv3 on 32-bit guests
MIPS:
- fix for where the guest could wrongly map the first page of
physical memory
x86:
- nested virtualization fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
MIPS: KVM: Check for pfn noslot case
kvm: nVMX: fix nested tsc scaling
KVM: nVMX: postpone VMCS changes on MSR_IA32_APICBASE write
KVM: nVMX: fix msr bitmaps to prevent L2 from accessing L0 x2APIC
arm64: KVM: report configured SRE value to 32-bit world
arm64: KVM: remove misleading comment on pmu status
KVM: arm/arm64: timer: Workaround misconfigured timer interrupt
arm64: Document workaround for Cortex-A72 erratum #853709
KVM: arm/arm64: Change misleading use of is_error_pfn
KVM: arm64: ITS: avoid re-mapping LPIs
KVM: arm64: check for ITS device on MSI injection
KVM: arm64: ITS: move ITS registration into first VCPU run
KVM: arm64: vgic-its: Make updates to propbaser/pendbaser atomic
KVM: arm64: vgic-its: Plug race in vgic_put_irq
KVM: arm64: vgic-its: Handle errors from vgic_add_lpi
KVM: arm64: ITS: return 1 on successful MSI injection
Linus Torvalds [Sat, 27 Aug 2016 06:01:09 +0000 (23:01 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"Round one of 4.8 rc fixes.
This should be the bulk of the -rc fixes for 4.8. I only have a few
things that are still outstanding (two ipoib bugs for which the
solution is not yet fully known, and a few queued items that came in
after my last push and I didn't want to delay this pull request for
late comers again).
Even though the patch count is kind of high, everything is minor fixes
so the overall churn is pretty low.
Summary:
- minor fixes to cxgb4
- minor fixes to mlx4
- one minor fix each to core, rxe, isert, srpt, mlx5, ocrdma, and usnic
- six or so fixes to i40iw fixes
- the rest are hfi1 fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (34 commits)
i40iw: Send last streaming mode message for loopback connections
IB/srpt: Update sport->port_guid with each port refresh
RDMA/ocrdma: Fix the max_sge reported from FW
i40iw: Avoid writing to freed memory
i40iw: Fix double free of allocated_buffer
IB/mlx5: Remove superfluous include of io-mapping.h
i40iw: Do not set self-referencing pointer to NULL after kfree
i40iw: Add missing NULL check for MPA private data
iw_cxgb4: Fix cxgb4 arm CQ logic w/IB_CQ_REPORT_MISSED_EVENTS
i40iw: Add missing check for interface already open
i40iw: Protect req_resource_num update
i40iw: Change mem_resources pointer to a u8
IB/core: Use memdup_user() rather than duplicating its implementation
IB/qib: Use memdup_user() rather than duplicating its implementation
iw_cxgb4: use the MPA initiator's IRD if < our ORD
iw_cxgb4: limit IRD/ORD advertised to ULP by device max.
IB/hfi1: Fix mm_struct use after free
IB/rdmvat: Fix double vfree() in rvt_create_qp() error path
IB/hfi1: Improve J_KEY generation
IB/hfi1: Return invalid field for non-QSFP CableInfo queries
...
Linus Torvalds [Sat, 27 Aug 2016 05:53:21 +0000 (22:53 -0700)]
Merge tag 'sound-4.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are a bunch of fixes as you can see in diffstat.
One core change in ASoC is about the unexpected unbinding error, and
another about debugfs cleanup.
The rest are wide-spread driver-specific fixes: a series of LINE6 USB
fixes, a HD-audio quirk, and various ASoC fixes including OMAP boot
fixes and Intel SKL fixes"
* tag 'sound-4.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (22 commits)
ALSA: hda/realtek - fix headset mic detection for MSI MS-B120
ASoC: omap-mcpdm: Fix irq resource handling
ASoC: max98371: Add terminate entry for i2c_device_id tables
ALSA: line6: Fix POD sysfs attributes segfault
ALSA: line6: Give up on the lock while URBs are released.
ALSA: line6: Remove double line6_pcm_release() after failed acquire.
ASoC: omap-abe-twl6040: Correct dmic-codec device registration
ASoC: core: Clean up DAPM before the card debugfs
ASoC: omap-mcpdm: Drop pdmclk clock handling
ASoC: atmel_ssc_dai: Don't unconditionally reset SSC on stream startup
ASoC: compress: Fix leak of a widget list in soc_compr_open_fe
ASoC: Intel: Skylake: Fix error return code in skl_probe()
ASoC: wm2000: Fix return of uninitialised varible
ASoC: Fix leak of rtd in soc_bind_dai_link
ASoC: da7213: Default to 64 BCLKs per WCLK to support all formats
ASoC: nau8825: fix static check error about semaphone control
ASoC: nau8825: fix bug in playback when suspend
ASoC: samsung: Fix clock handling in S3C24XX_UDA134X card
ASoC: simple-card-utils: add missing MODULE_xxx()
ASoC: Intel: Skylake: Check list empty while getting module info
...
Linus Torvalds [Sat, 27 Aug 2016 03:22:01 +0000 (20:22 -0700)]
Merge branch 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"We've queued up a few different fixes in here. These range from
enospc corners to fsync and quota fixes, and a few targeted at error
handling for corrupt metadata/fuzzing"
* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix lockdep warning on deadlock against an inode's log mutex
Btrfs: detect corruption when non-root leaf has zero item
Btrfs: check btree node's nritems
btrfs: don't create or leak aliased root while cleaning up orphans
Btrfs: fix em leak in find_first_block_group
btrfs: do not background blkdev_put()
Btrfs: clarify do_chunk_alloc()'s return value
btrfs: fix fsfreeze hang caused by delayed iputs deal
btrfs: update btrfs_space_info's bytes_may_use timely
btrfs: divide btrfs_update_reserved_bytes() into two functions
btrfs: use correct offset for reloc_inode in prealloc_file_extent_cluster()
btrfs: qgroup: Fix qgroup incorrectness caused by log replay
btrfs: relocation: Fix leaking qgroups numbers on data extents
btrfs: qgroup: Refactor btrfs_qgroup_insert_dirty_extent()
btrfs: waiting on qgroup rescan should not always be interruptible
btrfs: properly track when rescan worker is running
btrfs: flush_space: treat return value of do_chunk_alloc properly
Btrfs: add ASSERT for block group's memory leak
btrfs: backref: Fix soft lockup in __merge_refs function
Btrfs: fix memory leak of reloc_root
Linus Torvalds [Sat, 27 Aug 2016 03:15:32 +0000 (20:15 -0700)]
Merge tag 'dm-4.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- another stable fix for DM flakey (that tweaks the previous fix that
didn't factor in expected 'drop_writes' behavior for read IO).
- a dm-log bio operation flags fix for the broader block changes that
were merged during the 4.8 merge window.
* tag 'dm-4.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm log: fix unitialized bio operation flags
dm flakey: fix reads to be issued if drop_writes configured
Linus Torvalds [Sat, 27 Aug 2016 03:12:35 +0000 (20:12 -0700)]
Merge tag 'iommu-fixes-v4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"Fixes from Will Deacon:
- fix a couple of thinkos in the CMDQ error handling and
short-descriptor page table code that have been there since day one
- disable stalling faults, since they may result in hardware deadlock
- fix an accidental BUG() when passing disable_bypass=1 on the
cmdline"
* tag 'iommu-fixes-v4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/arm-smmu: Don't BUG() if we find aborting STEs with disable_bypass
iommu/arm-smmu: Disable stalling faults for all endpoints
iommu/arm-smmu: Fix CMDQ error handling
iommu/io-pgtable-arm-v7s: Fix attributes when splitting blocks
Linus Torvalds [Sat, 27 Aug 2016 01:50:07 +0000 (18:50 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Here's a set of block fixes for the current 4.8-rc release. This
contains:
- a fix for a secure erase regression, from Adrian.
- a fix for an mmc use-after-free bug regression, also from Adrian.
- potential zero pointer deference in bdev freezing, from Andrey.
- a race fix for blk_set_queue_dying() from Bart.
- a set of xen blkfront fixes from Bob Liu.
- three small fixes for bcache, from Eric and Kent.
- a fix for a potential invalid NVMe state transition, from Gabriel.
- blk-mq CPU offline fix, preventing us from issuing and completing a
request on the wrong queue. From me.
- revert two previous floppy changes, since they caused a user
visibile regression. A better fix is in the works.
- ensure that we don't send down bios that have more than 256
elements in them. Fixes a crash with bcache, for example. From
Ming.
- a fix for deferencing an error pointer with cgroup writeback.
Fixes a regression. From Vegard"
* 'for-linus' of git://git.kernel.dk/linux-block:
mmc: fix use-after-free of struct request
Revert "floppy: refactor open() flags handling"
Revert "floppy: fix open(O_ACCMODE) for ioctl-only open"
fs/block_dev: fix potential NULL ptr deref in freeze_bdev()
blk-mq: improve warning for running a queue on the wrong CPU
blk-mq: don't overwrite rq->mq_ctx
block: make sure a big bio is split into at most 256 bvecs
nvme: Fix nvme_get/set_features() with a NULL result pointer
bdev: fix NULL pointer dereference
xen-blkfront: free resources if xlvbd_alloc_gendisk fails
xen-blkfront: introduce blkif_set_queue_limits()
xen-blkfront: fix places not updated after introducing 64KB page granularity
bcache: pr_err: more meaningful error message when nr_stripes is invalid
bcache: RESERVE_PRIO is too small by one when prio_buckets() is a power of two.
bcache: register_bcache(): call blkdev_put() when cache_alloc() fails
block: Fix race triggered by blk_set_queue_dying()
block: Fix secure erase
nvme: Prevent controller state invalid transition
MSI:
- Use positive flags in pci_alloc_irq_vectors() (Christoph Hellwig)
- Call pci_intx() when using legacy interrupts in pci_alloc_irq_vectors() (Christoph Hellwig)
* tag 'pci-v4.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
x86/PCI: VMD: Fix infinite loop executing irq's
PCI: Call pci_intx() when using legacy interrupts in pci_alloc_irq_vectors()
PCI: Use positive flags in pci_alloc_irq_vectors()
PCI: Update "pci=resource_alignment" documentation
Ross Zwisler [Thu, 25 Aug 2016 22:17:17 +0000 (15:17 -0700)]
mm: silently skip readahead for DAX inodes
For DAX inodes we need to be careful to never have page cache pages in
the mapping->page_tree. This radix tree should be composed only of DAX
exceptional entries and zero pages.
ltp's readahead02 test was triggering a warning because we were trying
to insert a DAX exceptional entry but found that a page cache page had
already been inserted into the tree. This page was being inserted into
the radix tree in response to a readahead(2) call.
Readahead doesn't make sense for DAX inodes, but we don't want it to
report a failure either. Instead, we just return success and don't do
any work.
Link: http://lkml.kernel.org/r/20160824221429.21158-1-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by: Jeff Moyer <jmoyer@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Jan Kara <jack@suse.com> Cc: <stable@vger.kernel.org> [4.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Williams [Thu, 25 Aug 2016 22:17:14 +0000 (15:17 -0700)]
dax: fix device-dax region base
The data offset for a dax region needs to account for a reservation in
the resource range. Otherwise, device-dax is allowing mappings directly
into the memmap or device-info-block area with crash signatures like the
following:
Vegard Nossum [Thu, 25 Aug 2016 22:17:11 +0000 (15:17 -0700)]
fs/seq_file: fix out-of-bounds read
seq_read() is a nasty piece of work, not to mention buggy.
It has (I think) an old bug which allows unprivileged userspace to read
beyond the end of m->buf.
I was getting these:
BUG: KASAN: slab-out-of-bounds in seq_read+0xcd2/0x1480 at addr ffff880116889880
Read of size 2713 by task trinity-c2/1329
CPU: 2 PID: 1329 Comm: trinity-c2 Not tainted 4.8.0-rc1+ #96
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
Call Trace:
kasan_object_err+0x1c/0x80
kasan_report_error+0x2cb/0x7e0
kasan_report+0x4e/0x80
check_memory_region+0x13e/0x1a0
kasan_check_read+0x11/0x20
seq_read+0xcd2/0x1480
proc_reg_read+0x10b/0x260
do_loop_readv_writev.part.5+0x140/0x2c0
do_readv_writev+0x589/0x860
vfs_readv+0x7b/0xd0
do_readv+0xd8/0x2c0
SyS_readv+0xb/0x10
do_syscall_64+0x1b3/0x4b0
entry_SYSCALL64_slow_path+0x25/0x25
Object at ffff880116889100, in cache kmalloc-4096 size: 4096
Allocated:
PID = 1329
save_stack_trace+0x26/0x80
save_stack+0x46/0xd0
kasan_kmalloc+0xad/0xe0
__kmalloc+0x1aa/0x4a0
seq_buf_alloc+0x35/0x40
seq_read+0x7d8/0x1480
proc_reg_read+0x10b/0x260
do_loop_readv_writev.part.5+0x140/0x2c0
do_readv_writev+0x589/0x860
vfs_readv+0x7b/0xd0
do_readv+0xd8/0x2c0
SyS_readv+0xb/0x10
do_syscall_64+0x1b3/0x4b0
return_from_SYSCALL_64+0x0/0x6a
Freed:
PID = 0
(stack is not available)
Memory state around the buggy address: ffff88011688a000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88011688a080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff88011688a100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^ ffff88011688a180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88011688a200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Disabling lock debugging due to kernel taint
This seems to be the same thing that Dave Jones was seeing here:
https://lkml.org/lkml/2016/8/12/334
There are multiple issues here:
1) If we enter the function with a non-empty buffer, there is an attempt
to flush it. But it was not clearing m->from after doing so, which
means that if we try to do this flush twice in a row without any call
to traverse() in between, we are going to be reading from the wrong
place -- the splat above, fixed by this patch.
2) If there's a short write to userspace because of page faults, the
buffer may already contain multiple lines (i.e. pos has advanced by
more than 1), but we don't save the progress that was made so the
next call will output what we've already returned previously. Since
that is a much less serious issue (and I have a headache after
staring at seq_read() for the past 8 hours), I'll leave that for now.
Link: http://lkml.kernel.org/r/1471447270-32093-1-git-send-email-vegard.nossum@oracle.com Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Reported-by: Dave Jones <davej@codemonkey.org.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Thu, 25 Aug 2016 22:17:08 +0000 (15:17 -0700)]
mm: memcontrol: avoid unused function warning
A bugfix in v4.8-rc2 introduced a harmless warning when
CONFIG_MEMCG_SWAP is disabled but CONFIG_MEMCG is enabled:
mm/memcontrol.c:4085:27: error: 'mem_cgroup_id_get_online' defined but not used [-Werror=unused-function]
static struct mem_cgroup *mem_cgroup_id_get_online(struct mem_cgroup *memcg)
This moves the function inside of the #ifdef block that hides the
calling function, to avoid the warning.
Fixes: 1f47b61fb407 ("mm: memcontrol: fix swap counter leak on swapout from offline cgroup") Link: http://lkml.kernel.org/r/20160824113733.2776701-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Thu, 25 Aug 2016 22:17:05 +0000 (15:17 -0700)]
mm: clarify COMPACTION Kconfig text
The current wording of the COMPACTION Kconfig help text doesn't
emphasise that disabling COMPACTION might cripple the page allocator
which relies on the compaction quite heavily for high order requests and
an unexpected OOM can happen with the lack of compaction. Make sure we
are vocal about that.
Link: http://lkml.kernel.org/r/20160823091726.GK23577@dhcp22.suse.cz Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Masahiro Yamada [Thu, 25 Aug 2016 22:17:02 +0000 (15:17 -0700)]
treewide: replace config_enabled() with IS_ENABLED() (2nd round)
Commit 97f2645f358b ("tree-wide: replace config_enabled() with
IS_ENABLED()") mostly killed config_enabled(), but some new users have
appeared for v4.8-rc1. They are all used for a boolean option, so can
be replaced with IS_ENABLED() safely.
Link: http://lkml.kernel.org/r/1471970749-24867-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicolas Iooss [Thu, 25 Aug 2016 22:17:00 +0000 (15:17 -0700)]
printk: fix parsing of "brl=" option
Commit bbeddf52adc1 ("printk: move braille console support into separate
braille.[ch] files") moved the parsing of braille-related options into
_braille_console_setup(), changing the type of variable str from char*
to char**. In this commit, memcmp(str, "brl,", 4) was correctly updated
to memcmp(*str, "brl,", 4) but not memcmp(str, "brl=", 4).
Update the code to make "brl=" option work again and replace memcmp()
with strncmp() to make the compiler able to detect such an issue.
Fixes: bbeddf52adc1 ("printk: move braille console support into separate braille.[ch] files") Link: http://lkml.kernel.org/r/20160823165700.28952-1-nicolas.iooss_linux@m4x.org Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrea Arcangeli [Thu, 25 Aug 2016 22:16:57 +0000 (15:16 -0700)]
soft_dirty: fix soft_dirty during THP split
While adding proper userfaultfd_wp support with bits in pagetable and
swap entry to avoid false positives WP userfaults through swap/fork/
KSM/etc, I've been adding a framework that mostly mirrors soft dirty.
So I noticed in one place I had to add uffd_wp support to the pagetables
that wasn't covered by soft_dirty and I think it should have.
Example: in the THP migration code migrate_misplaced_transhuge_page()
pmd_mkdirty is called unconditionally after mk_huge_pmd.
That sets soft dirty too (it's a false positive for soft dirty, the soft
dirty bit could be more finegrained and transfer the bit like uffd_wp
will do.. pmd/pte_uffd_wp() enforces the invariant that when it's set
pmd/pte_write is not set).
However in the THP split there's no unconditional pmd_mkdirty after
mk_huge_pmd and pte_swp_mksoft_dirty isn't called after the migration
entry is created. The code sets the dirty bit in the struct page
instead of setting it in the pagetable (which is fully equivalent as far
as the real dirty bit is concerned, as the whole point of pagetable bits
is to be eventually flushed out of to the page, but that is not
equivalent for the soft-dirty bit that gets lost in translation).
This was found by code review only and totally untested as I'm working
to actually replace soft dirty and I don't have time to test potential
soft dirty bugfixes as well :).
Transfer the soft_dirty from pmd to pte during THP splits.
This fix avoids losing the soft_dirty bit and avoids userland memory
corruption in the checkpoint.
Fixes: eef1b3ba053aa6 ("thp: implement split_huge_pmd()") Link: http://lkml.kernel.org/r/1471610515-30229-2-git-send-email-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@virtuozzo.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sysctl: handle error writing UINT_MAX to u32 fields
We have scripts which write to certain fields on 3.18 kernels but this
seems to be failing on 4.4 kernels. An entry which we write to here is
xfrm_aevent_rseqth which is u32.
Commit 230633d109e3 ("kernel/sysctl.c: detect overflows when converting
to int") prevented writing to sysctl entries when integer overflow
occurs. However, this does not apply to unsigned integers.
Heinrich suggested that we introduce a new option to handle 64 bit
limits and set min as 0 and max as UINT_MAX. This might not work as it
leads to issues similar to __do_proc_doulongvec_minmax. Alternatively,
we would need to change the datatype of the entry to 64 bit.
static int __do_proc_doulongvec_minmax(void *data, struct ctl_table
{
i = (unsigned long *) data; //This cast is causing to read beyond the size of data (u32)
vleft = table->maxlen / sizeof(unsigned long); //vleft is 0 because maxlen is sizeof(u32) which is lesser than sizeof(unsigned long) on x86_64.
Introduce a new proc handler proc_douintvec. Individual proc entries
will need to be updated to use the new handler.
[akpm@linux-foundation.org: coding-style fixes] Fixes: 230633d109e3 ("kernel/sysctl.c:detect overflows when converting to int") Link: http://lkml.kernel.org/r/1471479806-5252-1-git-send-email-subashab@codeaurora.org Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Kees Cook <keescook@chromium.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is because table_open() depends on file->f_op to tell which
seq_file ops should be passed down. But, the original file ops in
file->f_op is replaced by "debugfs_full_proxy_file_operations" with
commit 49d200deaa68 ("debugfs: prevent access to removed files'
private data").
Currently, I can think up 2 solutions: 1st, replace
debugfs_create_file() with debugfs_create_file_unsafe();
2nd, make different table_open#() accordingly. The 1st one
is neat, but I don't thoroughly understand its risk. Maybe
someone has a better one.
Signed-off-by: Eric Ren <zren@suse.com> Signed-off-by: David Teigland <teigland@redhat.com>
Chen-Yu Tsai [Thu, 25 Aug 2016 06:26:59 +0000 (14:26 +0800)]
clocksource/drivers/sun4i: Clear interrupts after stopping timer in probe function
The bootloader (U-boot) sometimes uses this timer for various delays.
It uses it as a ongoing counter, and does comparisons on the current
counter value. The timer counter is never stopped.
In some cases when the user interacts with the bootloader, or lets
it idle for some time before loading Linux, the timer may expire,
and an interrupt will be pending. This results in an unexpected
interrupt when the timer interrupt is enabled by the kernel, at
which point the event_handler isn't set yet. This results in a NULL
pointer dereference exception, panic, and no way to reboot.
Clear any pending interrupts after we stop the timer in the probe
function to avoid this.
Cc: stable@vger.kernel.org Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
drivers/clocksource/pistachio: Fix memory corruption in init
Driver init code incorrectly uses the block base address and as a result
clears clocksource structure's fields instead of the hardware registers.
Commit 09a998201649 ("timekeeping: Lift clocksource cacheline
restriction") has changed the offsets within pistachio_clocksource
structure and what has previously gone unnoticed now leads to a kernel
panic during boot.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Adrian Hunter [Thu, 25 Aug 2016 20:11:43 +0000 (14:11 -0600)]
mmc: fix use-after-free of struct request
We call mmc_req_is_special() after having processed a request, but
it could be freed after that. Check that ahead of time, and use
the cached value.
Reported-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Fixes: c2df40dfb8c0 ("drivers: use req op accessor") Signed-off-by: Jens Axboe <axboe@fb.com>
Dave Airlie [Thu, 25 Aug 2016 19:18:40 +0000 (05:18 +1000)]
Merge tag 'drm-intel-fixes-2016-08-25' of git://anongit.freedesktop.org/drm-intel into drm-fixes
i915 fixes queue.
* tag 'drm-intel-fixes-2016-08-25' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Fix botched merge that downgrades CSR versions.
drm/i915/skl: Ensure pipes with changed wms get added to the state
drm/i915/gen9: Only copy WM results for changed pipes to skl_hw
drm/i915/skl: Add support for the SAGV, fix underrun hangs
drm/i915/gen6+: Interpret mailbox error flags
drm/i915: Reattach comment, complete type specification
drm/i915: Unconditionally flush any chipset buffers before execbuf
drm/i915/gen9: Drop invalid WARN() during data rate calculation
drm/i915/gen9: Initialize intel_state->active_crtcs during WM sanitization (v2)
Daniel Vetter [Wed, 10 Aug 2016 16:52:38 +0000 (18:52 +0200)]
drm: Protect fb_defio in drivers with CONFIG_KMS_FBDEV_EMULATION
For reasons that entirely elude me fb.h exposes all the structures,
even when it is not enabled. Except for special stuff like fb_defio.
Which means all the drivers which haven't yet switched over to the
defio support in the helpers and still roll their own, will fail
to compile when fbdev emulation is disabled. Protect just those
bits, as a gnarly reminder that conversion to the core defio helpers
would be good.
Takashi Iwai [Thu, 25 Aug 2016 15:56:09 +0000 (17:56 +0200)]
Merge tag 'asoc-fix-v4.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.8
A clutch of fixes for v4.8. These are mainly driver specific, the most
notable ones being those for OMAP which fix a series of issues that
broke boot on some platforms there when deferred probe kicked in.
There's also one core fix for an issue when unbinding a card which for
some reason had managed to not manifest until recently.
Tatyana Nikolova [Wed, 24 Aug 2016 18:59:17 +0000 (13:59 -0500)]
i40iw: Send last streaming mode message for loopback connections
Send a zero length last streaming mode message for loopback
connections to synchronize between accepting QP and connecting QP.
This avoids data transfer to start on the accepting QP before
the connecting QP is in RTS. Also remove function i40iw_loopback_nop()
as it is no longer used.
Andrey Ryabinin [Tue, 23 Aug 2016 15:55:31 +0000 (18:55 +0300)]
fs/block_dev: fix potential NULL ptr deref in freeze_bdev()
Calling freeze_bdev() twice on the same block device without mounted
filesystem get_super() will return NULL, which will lead to NULL-ptr
dereference later in drop_super().
Check get_super() result to fix that.
Note, that this is a purely theoretical issue. We have only 3
freeze_bdev() callers. 2 of them are in filesystem code and used on a
device with mounted fs. The third one in lock_fs() has protection in
upper-layer code against freezing block device the second time without
thawing it first.
Filipe Manana [Tue, 23 Aug 2016 20:13:51 +0000 (21:13 +0100)]
Btrfs: fix lockdep warning on deadlock against an inode's log mutex
Commit 44f714dae50a ("Btrfs: improve performance on fsync against new
inode after rename/unlink"), which landed in 4.8-rc2, introduced a
possibility for a deadlock due to double locking of an inode's log mutex
by the same task, which lockdep reports with:
[23045.433975] =============================================
[23045.434748] [ INFO: possible recursive locking detected ]
[23045.435426] 4.7.0-rc6-btrfs-next-34+ #1 Not tainted
[23045.436044] ---------------------------------------------
[23045.436044] xfs_io/3688 is trying to acquire lock:
[23045.436044] (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]
but task is already holding lock:
[23045.436044] (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]
other info that might help us debug this:
[23045.436044] Possible unsafe locking scenario:
This is because while logging the inode of file bar we end up logging its
parent directory (since its inode has an unlink_trans field matching the
current transaction id due to the rename operation), which in turn logs
the inodes for all its new dentries, so that the new inode for the new
file named foo gets logged which in turn triggered another logging attempt
for the inode we are fsync'ing, since that inode had an old name that
corresponds to the name of the new inode.
So fix this by ensuring that when logging the inode for a new dentry that
has a name matching an old name of some other inode, we don't log again
the original inode that we are fsync'ing.
Fixes: 44f714dae50a ("Btrfs: improve performance on fsync against new inode after rename/unlink") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Liu Bo [Tue, 23 Aug 2016 22:22:58 +0000 (15:22 -0700)]
Btrfs: detect corruption when non-root leaf has zero item
Right now we treat leaf which has zero item as a valid one
because we could have an empty tree, that is, a root that is
also a leaf without any item, however, in the same case but
when the leaf is not a root, we can end up with hitting the
BUG_ON(1) in btrfs_extend_item() called by
setup_inline_extent_backref().
This makes us check the situation as a corruption if leaf is
not its own root.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Liu Bo [Wed, 24 Aug 2016 00:37:45 +0000 (17:37 -0700)]
Btrfs: check btree node's nritems
When btree node (level = 1) has nritems which equals to zero,
we can end up with panic due to insert_ptr()'s
BUG_ON(slot > nritems);
where slot is 1 and nritems is 0, as copy_for_split() calls
insert_ptr(.., path->slots[1] + 1, ...);
A invalid value results in the whole mess, this adds the check
for btree's node nritems so that we stop reading block when
when something is wrong.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Jeff Mahoney [Thu, 18 Aug 2016 01:58:33 +0000 (21:58 -0400)]
btrfs: don't create or leak aliased root while cleaning up orphans
commit 909c3a22da3 (Btrfs: fix loading of orphan roots leading to BUG_ON)
avoids the BUG_ON but can add an aliased root to the dead_roots list or
leak the root.
Since we've already been loading roots into the radix tree, we should
use it before looking the root up on disk.
Cc: <stable@vger.kernel.org> # 4.5 Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
At the end of unmount/dev-delete, if the device exclusive open is not
actually closed, then there might be a race with another program in
the userland who is trying to open the device in exclusive mode and
it may fail for eg:
unmount /btrfs; fsck /dev/x
btrfs dev del /dev/x /btrfs; fsck /dev/x
so here background blkdev_put() is not a choice
Signed-off-by: Anand Jain <Anand.Jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
With BTRFS_RESERVE_FLUSH_LIMIT, if flush_space is already on the
flush_state of ALLOC_CHUNK and it successfully allocates a new
chunk, then instead of trying to reserve space again,
reserve_metadata_bytes returns 1 immediately.
Eventually the callers who call start_transaction() usually just
do the IS_ERR() check which ERR_PTR(1) can pass, then it'll get
a panic when dereferencing a pointer which is ERR_PTR(1).
The following patch fixes the above problem.
"btrfs: flush_space: treat return value of do_chunk_alloc properly"
https://patchwork.kernel.org/patch/7778651/
This add comments to clarify do_chunk_alloc()'s return value.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
>From this warning, freeze_super() already holds SB_FREEZE_FS, but
btrfs_freeze() will call btrfs_commit_transaction() again, if
btrfs_commit_transaction() finds that it has delayed iputs to handle,
it'll start_transaction(), which will try to get SB_FREEZE_FS lock
again, then deadlock occurs.
The root cause is that in btrfs, sync_filesystem(sb) does not make
sure all metadata is updated. There still maybe some codes adding
delayed iputs, see below sample race window:
CPU1 | CPU2
|-> freeze_super() |
|-> sync_filesystem(sb); |
| |-> cleaner_kthread()
| | |-> btrfs_delete_unused_bgs()
| | |-> btrfs_remove_chunk()
| | |-> btrfs_remove_block_group()
| | |-> btrfs_add_delayed_iput()
| |
|-> sb->s_writers.frozen = SB_FREEZE_FS; |
|-> sb_wait_write(sb, SB_FREEZE_FS); |
| acquire SB_FREEZE_FS lock. |
| |
|-> btrfs_freeze() |
|-> btrfs_commit_transaction() |
|-> btrfs_run_delayed_iputs() |
| will handle delayed iputs, |
| that means start_transaction() |
| will be called, which will try |
| to get SB_FREEZE_FS lock. |
To fix this issue, introduce a "int fs_frozen" to record internally whether
fs has been frozen. If fs has been frozen, we can not handle delayed iputs.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment to btrfs_freeze ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
This patch can fix some false ENOSPC errors, below test script can
reproduce one false ENOSPC error:
#!/bin/bash
dd if=/dev/zero of=fs.img bs=$((1024*1024)) count=128
dev=$(losetup --show -f fs.img)
mkfs.btrfs -f -M $dev
mkdir /tmp/mntpoint
mount $dev /tmp/mntpoint
cd /tmp/mntpoint
xfs_io -f -c "falloc 0 $((64*1024*1024))" testfile
Above script will fail for ENOSPC reason, but indeed fs still has free
space to satisfy this request. Please see call graph:
btrfs_fallocate()
|-> btrfs_alloc_data_chunk_ondemand()
| bytes_may_use += 64M
|-> btrfs_prealloc_file_range()
|-> btrfs_reserve_extent()
|-> btrfs_add_reserved_bytes()
| alloc_type is RESERVE_ALLOC_NO_ACCOUNT, so it does not
| change bytes_may_use, and bytes_reserved += 64M. Now
| bytes_may_use + bytes_reserved == 128M, which is greater
| than btrfs_space_info's total_bytes, false enospc occurs.
| Note, the bytes_may_use decrease operation will be done in
| end of btrfs_fallocate(), which is too late.
Here is another simple case for buffered write:
CPU 1 | CPU 2
|
|-> cow_file_range() |-> __btrfs_buffered_write()
|-> btrfs_reserve_extent() | |
| | |
| | |
| ..... | |-> btrfs_check_data_free_space()
| |
| |
|-> extent_clear_unlock_delalloc() |
In CPU 1, btrfs_reserve_extent()->find_free_extent()->
btrfs_add_reserved_bytes() do not decrease bytes_may_use, the decrease
operation will be delayed to be done in extent_clear_unlock_delalloc().
Assume in this case, btrfs_reserve_extent() reserved 128MB data, CPU2's
btrfs_check_data_free_space() tries to reserve 100MB data space.
If
100MB > data_sinfo->total_bytes - data_sinfo->bytes_used -
data_sinfo->bytes_reserved - data_sinfo->bytes_pinned -
data_sinfo->bytes_readonly - data_sinfo->bytes_may_use
btrfs_check_data_free_space() will try to allcate new data chunk or call
btrfs_start_delalloc_roots(), or commit current transaction in order to
reserve some free space, obviously a lot of work. But indeed it's not
necessary as long as decreasing bytes_may_use timely, we still have
free space, decreasing 128M from bytes_may_use.
To fix this issue, this patch chooses to update bytes_may_use for both
data and metadata in btrfs_add_reserved_bytes(). For compress path, real
extent length may not be equal to file content length, so introduce a
ram_bytes argument for btrfs_reserve_extent(), find_free_extent() and
btrfs_add_reserved_bytes(), it's becasue bytes_may_use is increased by
file content length. Then compress path can update bytes_may_use
correctly. Also now we can discard RESERVE_ALLOC_NO_ACCOUNT, RESERVE_ALLOC
and RESERVE_FREE.
As we know, usually EXTENT_DO_ACCOUNTING is used for error path. In
run_delalloc_nocow(), for inode marked as NODATACOW or extent marked as
PREALLOC, we also need to update bytes_may_use, but can not pass
EXTENT_DO_ACCOUNTING, because it also clears metadata reservation, so
here we introduce EXTENT_CLEAR_DATA_RESV flag to indicate btrfs_clear_bit_hook()
to update btrfs_space_info's bytes_may_use.
Meanwhile __btrfs_prealloc_file_range() will call
btrfs_free_reserved_data_space() internally for both sucessful and failed
path, btrfs_prealloc_file_range()'s callers does not need to call
btrfs_free_reserved_data_space() any more.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Wang Xiaoguang [Mon, 25 Jul 2016 07:51:39 +0000 (15:51 +0800)]
btrfs: divide btrfs_update_reserved_bytes() into two functions
This patch divides btrfs_update_reserved_bytes() into
btrfs_add_reserved_bytes() and btrfs_free_reserved_bytes(), and
next patch will extend btrfs_add_reserved_bytes（）to fix some
false ENOSPC error, please see later patch for detailed info.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Wang Xiaoguang [Mon, 25 Jul 2016 07:51:38 +0000 (15:51 +0800)]
btrfs: use correct offset for reloc_inode in prealloc_file_extent_cluster()
In prealloc_file_extent_cluster(), btrfs_check_data_free_space() uses
wrong file offset for reloc_inode, it uses cluster->start and cluster->end,
which indeed are extent's bytenr. The correct value should be
cluster->[start|end] minus block group's start bytenr.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Qu Wenruo [Mon, 15 Aug 2016 02:36:51 +0000 (10:36 +0800)]
btrfs: relocation: Fix leaking qgroups numbers on data extents
This patch fixes a REGRESSION introduced in 4.2, caused by the big quota
rework.
When balancing data extents, qgroup will leak all its numbers for
relocated data extents.
The relocation is done in the following steps for data extents:
1) Create data reloc tree and inode
2) Copy all data extents to data reloc tree
And commit transaction
3) Create tree reloc tree(special snapshot) for any related subvolumes
4) Replace file extent in tree reloc tree with new extents in data reloc
tree
And commit transaction
5) Merge tree reloc tree with original fs, by swapping tree blocks
For 1)~4), since tree reloc tree and data reloc tree doesn't count to
qgroup, everything is OK.
But for 5), the swapping of tree blocks will only info qgroup to track
metadata extents.
If metadata extents contain file extents, qgroup number for file extents
will get lost, leading to corrupted qgroup accounting.
The fix is, before commit transaction of step 5), manually info qgroup to
track all file extents in data reloc tree.
Since at commit transaction time, the tree swapping is done, and qgroup
will account these data extents correctly.
Cc: Mark Fasheh <mfasheh@suse.de> Reported-by: Mark Fasheh <mfasheh@suse.de> Reported-by: Filipe Manana <fdmanana@gmail.com> Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Refactor btrfs_qgroup_insert_dirty_extent() function, to two functions:
1. btrfs_qgroup_insert_dirty_extent_nolock()
Almost the same with original code.
For delayed_ref usage, which has delayed refs locked.
Change the return value type to int, since caller never needs the
pointer, but only needs to know if they need to free the allocated
memory.
2. btrfs_qgroup_insert_dirty_extent()
The more encapsulated version.
Will do the delayed_refs lock, memory allocation, quota enabled check
and other things.
The original design is to keep exported functions to minimal, but since
more btrfs hacks exposed, like replacing path in balance, we need to
record dirty extents manually, so we have to add such functions.
Also, add comment for both functions, to info developers how to keep
qgroup correct when doing hacks.
Cc: Mark Fasheh <mfasheh@suse.de> Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-and-Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Jeff Mahoney [Tue, 9 Aug 2016 02:08:06 +0000 (22:08 -0400)]
btrfs: waiting on qgroup rescan should not always be interruptible
We wait on qgroup rescan completion in three places: file system
shutdown, the quota disable ioctl, and the rescan wait ioctl. If the
user sends a signal while we're waiting, we continue happily along. This
is expected behavior for the rescan wait ioctl. It's racy in the shutdown
path but mostly works due to other unrelated synchronization points.
In the quota disable path, it Oopses the kernel pretty much immediately.
Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Jeff Mahoney [Mon, 15 Aug 2016 16:10:33 +0000 (12:10 -0400)]
btrfs: properly track when rescan worker is running
The qgroup_flags field is overloaded such that it reflects the on-disk
status of qgroups and the runtime state. The BTRFS_QGROUP_STATUS_FLAG_RESCAN
flag is used to indicate that a rescan operation is in progress, but if
the file system is unmounted while a rescan is running, the rescan
operation is paused. If the file system is then mounted read-only,
the flag will still be present but the rescan operation will not have
been resumed. When we go to umount, btrfs_qgroup_wait_for_completion
will see the flag and interpret it to mean that the rescan worker is
still running and will wait for a completion that will never come.
This patch uses a separate flag to indicate when the worker is
running. The locking and state surrounding the qgroup rescan worker
needs a lot of attention beyond this patch but this is enough to
avoid a hung umount.
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by; Jeff Mahoney <jeffm@suse.com> Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Alex Lyakas [Sun, 6 Dec 2015 10:32:31 +0000 (12:32 +0200)]
btrfs: flush_space: treat return value of do_chunk_alloc properly
do_chunk_alloc returns 1 when it succeeds to allocate a new chunk.
But flush_space will not convert this to 0, and will also return 1.
As a result, reserve_metadata_bytes will think that flush_space failed,
and may potentially return this value "1" to the caller (depends how
reserve_metadata_bytes was called). The caller will also treat this as an error.
For example, btrfs_block_rsv_refill does:
int ret = -ENOSPC;
...
ret = reserve_metadata_bytes(root, block_rsv, num_bytes, flush);
if (!ret) {
block_rsv_add_bytes(block_rsv, num_bytes, 0);
return 0;
}
return ret;
So it will return -ENOSPC.
Signed-off-by: Alex Lyakas <alex@zadarastorage.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Liu Bo [Thu, 21 Jul 2016 00:33:44 +0000 (17:33 -0700)]
Btrfs: add ASSERT for block group's memory leak
This adds several ASSERT()' s to report memory leak of block group cache.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
btrfs: backref: Fix soft lockup in __merge_refs function
When over 1000 file extents refers to one extent, find_parent_nodes()
will be obviously slow, due to the O(n^2)~O(n^3) loops inside
__merge_refs().
The following ftrace shows the cubic growth of execution time:
256 refs
5) + 91.768 us | __add_keyed_refs.isra.12 [btrfs]();
5) 1.447 us | __add_missing_keys.isra.13 [btrfs]();
5) ! 114.544 us | __merge_refs [btrfs]();
5) ! 136.399 us | __merge_refs [btrfs]();
512 refs
6) ! 279.859 us | __add_keyed_refs.isra.12 [btrfs]();
6) 3.164 us | __add_missing_keys.isra.13 [btrfs]();
6) ! 442.498 us | __merge_refs [btrfs]();
6) # 2091.073 us | __merge_refs [btrfs]();
and 1024 refs
7) ! 368.683 us | __add_keyed_refs.isra.12 [btrfs]();
7) 4.810 us | __add_missing_keys.isra.13 [btrfs]();
7) # 2043.428 us | __merge_refs [btrfs]();
7) * 18964.23 us | __merge_refs [btrfs]();
And sort them into the following char:
(Unit: us)
------------------------------------------------------------------------
Trace function | 256 ref | 512 refs | 1024 refs |
------------------------------------------------------------------------
__add_keyed_refs | 91 | 249 | 368 |
__add_missing_keys | 1 | 3 | 4 |
__merge_refs 1st call | 114 | 442 | 2043 |
__merge_refs 2nd call | 136 | 2091 | 18964 |
------------------------------------------------------------------------
We can see the that __add_keyed_refs() grows almost in linear behavior.
And __add_missing_keys() in this case doesn't change much or takes much
time.
While for the 1st __merge_refs() it's square growth
for the 2nd __merge_refs() call it's cubic growth.
It's no doubt that merge_refs() will take a long long time to execute if
the number of refs continues its grows.
So add a cond_resced() into the loop of __merge_refs().
Although this will solve the problem of soft lockup, we need to use the
new rb_tree based structure introduced by Lu Fengqi to really solve the
long execution time.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Liu Bo [Tue, 19 Jul 2016 22:36:05 +0000 (15:36 -0700)]
Btrfs: fix memory leak of reloc_root
When some critical errors occur and FS would be flipped into RO,
if we have an on-going balance, we can end up with a memory leak
of root->reloc_root since btrfs_drop_snapshots() bails out
without freeing reloc_root at the very early start.
However, we're not able to free reloc_root in btrfs_drop_snapshots()
because its caller, merge_reloc_roots(), still needs to access it to
cleanup reloc_root's rbtree.
This makes us free reloc_root when we're going to free fs/file roots.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Mark Rutland [Wed, 24 Aug 2016 17:02:08 +0000 (18:02 +0100)]
arm64: avoid TLB conflict with CONFIG_RANDOMIZE_BASE
When CONFIG_RANDOMIZE_BASE is selected, we modify the page tables to remap the
kernel at a newly-chosen VA range. We do this with the MMU disabled, but do not
invalidate TLBs prior to re-enabling the MMU with the new tables. Thus the old
mappings entries may still live in TLBs, and we risk violating
Break-Before-Make requirements, leading to TLB conflicts and/or other issues.
We invalidate TLBs when we uninsall the idmap in early setup code, but prior to
this we are subject to issues relating to the Break-Before-Make violation.
Avoid these issues by invalidating the TLBs before the new mappings can be
used by the hardware.
Fixes: f80fb3a3d508 ("arm64: add support for kernel ASLR") Cc: <stable@vger.kernel.org> # 4.6+ Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Linus Torvalds [Thu, 25 Aug 2016 09:49:38 +0000 (05:49 -0400)]
Merge branch 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal fixes from Zhang Rui:
- Fix cpu_cooling to have separate thermal_cooling_device_ops
structures for cpus with and without power model, to avoid NULL
dereference in cpufreq_state2power. From Brendan Jackman.
- Fix a possible NULL dereference in imx_thermal driver. From Corentin
LABBE.
- Another two trivial fixes, one typo fix and one deleting module
owner. From Caesar Wang and Markus Elfring.
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal: imx: fix a possible NULL dereference
thermal: trivial: fix the typo
Thermal-INT3406: Delete owner assignment
thermal: cpu_cooling: Fix NULL dereference in cpufreq_state2power
Dave Airlie [Thu, 25 Aug 2016 02:50:30 +0000 (12:50 +1000)]
Merge branch 'drm-fixes-4.8' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
radeon and amdgpu fixes for 4.8. Nothing major:
- fix a performance regression due to the LRU changes in 4.7
- 32 bit fixes
- fix a PLL regression
- misc bug fixes
* 'drm-fixes-4.8' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: skip TV/CV in display parsing
drm/amdgpu: avoid a possible array overflow
drm/amdgpu: fix lru size grouping v2
drm/amdgpu: fix timeout value check in amd_sched_job_recovery
drm/amdgpu: fix sdma_v2_4_ring_test_ib
drm/amdgpu: fix amdgpu_move_blit on 32bit systems
drm/radeon: fix radeon_move_blit on 32bit systems
drm/radeon: only apply the SS fractional workaround to RS[78]80
Dave Airlie [Thu, 25 Aug 2016 02:49:22 +0000 (12:49 +1000)]
Merge tag 'drm/tegra/for-4.8-rc4' of git://anongit.freedesktop.org/tegra/linux into drm-fixes
drm/tegra: Fixes for v4.8-rc4
This contains one fix for DSI runtime power management support that was
introduced in v4.8-rc1. This is slightly more elaborate than I would've
wished, but there are a few corner cases that needed fixing.
* tag 'drm/tegra/for-4.8-rc4' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: dsi: Enhance runtime power management
Commit e6047149db ("dm: use bio op accessors") switched DM over to
using bio_set_op_attrs() but didn't take care to initialize
lc->io_req.bi_op_flags in dm-log.c:rw_header(). This caused
rw_header()'s call to dm_io() to make bio->bi_op_flags be uninitialized
in dm-io.c:do_region(), which ultimately resulted in a SCSI BUG() in
sd_init_command().
Also, adjust rw_header() and its callers to use REQ_OP_{READ|WRITE}.
Fixes: e6047149db ("dm: use bio op accessors") Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Mike Snitzer [Thu, 25 Aug 2016 01:12:58 +0000 (21:12 -0400)]
dm flakey: fix reads to be issued if drop_writes configured
v4.8-rc3 commit 99f3c90d0d ("dm flakey: error READ bios during the
down_interval") overlooked the 'drop_writes' feature, which is meant to
allow reads to be issued rather than errored, during the down_interval.
Fixes: 99f3c90d0d ("dm flakey: error READ bios during the down_interval") Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
Jens Axboe [Wed, 24 Aug 2016 21:38:01 +0000 (15:38 -0600)]
blk-mq: improve warning for running a queue on the wrong CPU
__blk_mq_run_hw_queue() currently warns if we are running the queue on a
CPU that isn't set in its mask. However, this can happen if a CPU is
being offlined, and the workqueue handling will place the work on CPU0
instead. Improve the warning so that it only triggers if the batch cpu
in the hardware queue is currently online. If it triggers for that
case, then it's indicative of a flow problem in blk-mq, so we want to
retain it for that case.
Jens Axboe [Wed, 24 Aug 2016 21:34:35 +0000 (15:34 -0600)]
blk-mq: don't overwrite rq->mq_ctx
We do this in a few places, if the CPU is offline. This isn't allowed,
though, since on multi queue hardware, we can't just move a request
from one software queue to another, if they map to different hardware
queues. The request and tag isn't valid on another hardware queue.
This can happen if plugging races with CPU offlining. But it does
no harm, since it can only happen in the window where we are
currently busy freezing the queue and flushing IO, in preparation
for redoing the software <-> hardware queue mappings.
Doug Ledford [Wed, 24 Aug 2016 16:14:19 +0000 (12:14 -0400)]
IB/srpt: Update sport->port_guid with each port refresh
If port_guid is set with the default subnet_prefix, then we get a change
event and run a port refresh, we don't update the port_guid. As a
result, attempts to create a target device that uses the new
subnet_prefix in the wwn will fail to find a match and be rejected by
the ib_srpt driver. This makes it impossible to configure a port if it
was initialized with a default subnet_prefix and later changed to any
non-default subnet-prefix. Updating the port refresh task to always
update the wwn based upon the current subnext_prefix solves this
problem.
Linus Torvalds [Wed, 24 Aug 2016 18:04:30 +0000 (14:04 -0400)]
Merge tag 'for-linus-4.8b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen regression fix from David Vrabel:
"Fix a regression in the xenbus device preventing userspace tools from
working"
* tag 'for-linus-4.8b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: change the type of xen_vcpu_id to uint32_t
xenbus: don't look up transaction IDs for ordinary writes
We pass xen_vcpu_id mapping information to hypercalls which require
uint32_t type so it would be cleaner to have it as uint32_t. The
initializer to -1 can be dropped as we always do the mapping before using
it and we never check the 'not set' value anyway.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Jan Beulich [Mon, 15 Aug 2016 15:02:38 +0000 (09:02 -0600)]
xenbus: don't look up transaction IDs for ordinary writes
This should really only be done for XS_TRANSACTION_END messages, or
else at least some of the xenstore-* tools don't work anymore.
Fixes: 0beef634b8 ("xenbus: don't BUG() on user mode induced condition") Reported-by: Richard Schütz <rschuetz@uni-koblenz.de> Cc: <stable@vger.kernel.org> Signed-off-by: Jan Beulich <jbeulich@suse.com> Tested-by: Richard Schütz <rschuetz@uni-koblenz.de> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Selvin Xavier [Wed, 24 Aug 2016 05:17:41 +0000 (01:17 -0400)]
RDMA/ocrdma: Fix the max_sge reported from FW
Current driver is reporting wrong values for max_sge and
max_sge_rd in query_device. This breaks the nfs rdma and iser
in some device profiles. Fixing the driver to report
correct values from FW.
Mustafa Ismail [Tue, 23 Aug 2016 22:24:56 +0000 (17:24 -0500)]
i40iw: Avoid writing to freed memory
iwpbl->iwmr points to the structure that contains iwpbl,
which is iwmr. Setting this to NULL would result in
writing to freed memory. So just free iwmr, and return.
Fixes: d37498417947 ("i40iw: add files for iwarp interface") Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Mustafa Ismail [Tue, 23 Aug 2016 21:50:13 +0000 (16:50 -0500)]
i40iw: Fix double free of allocated_buffer
Memory allocated for iwqp; iwqp->allocated_buffer is freed twice in
the create_qp error path. Correct this by having it freed only once in
i40iw_free_qp_resources().
Fixes: d37498417947 ("i40iw: add files for iwarp interface") Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Chris Wilson [Tue, 23 Aug 2016 20:16:26 +0000 (21:16 +0100)]
IB/mlx5: Remove superfluous include of io-mapping.h
This file does not use any structs or functions defined by io-mapping.h
(nor does it directly use iomap, ioremap, iounamp or friends). Remove it
to simplify verification of changes to io-mapping.h
Shiraz Saleem [Mon, 22 Aug 2016 23:16:37 +0000 (18:16 -0500)]
i40iw: Add missing NULL check for MPA private data
Add NULL check for pdata and pdata->addr before the memcpy in
i40iw_form_cm_frame(). This fixes a NULL pointer de-reference
which occurs when the MPA private data pointer is NULL. Also
only copy pdata->size bytes in the memcpy to prevent reading
past the length of the private data buffer provided by upper layer.
Christian König [Wed, 17 Aug 2016 11:44:20 +0000 (13:44 +0200)]
drm/amdgpu: fix lru size grouping v2
Adding a BO can make it the insertion point for larger sizes as well.
v2: add a comment about the guard structure.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Ming Lei [Tue, 23 Aug 2016 13:49:45 +0000 (21:49 +0800)]
block: make sure a big bio is split into at most 256 bvecs
After arbitrary bio size was introduced, the incoming bio may
be very big. We have to split the bio into small bios so that
each holds at most BIO_MAX_PAGES bvecs for safety reason, such
as bio_clone().
The issue can be reproduced by the following steps:
- create one raid1 over two virtio-blk
- build bcache device over the above raid1 and another cache device
and bucket size is set as 2Mbytes
- set cache mode as writeback
- run random write over ext4 on the bcache device
Fixes: 54efd50(block: make generic_make_request handle arbitrarily sized bios) Reported-by: Sebastian Roesner <sroesner-kernelorg@roesner-online.de> Reported-by: Eric Wheeler <bcache@lists.ewheeler.net> Cc: stable@vger.kernel.org (4.3+) Cc: Shaohua Li <shli@fb.com> Acked-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
Andy Lutomirski [Wed, 24 Aug 2016 10:52:12 +0000 (03:52 -0700)]
nvme: Fix nvme_get/set_features() with a NULL result pointer
nvme_set_features() callers seem to expect that passing NULL as the
result pointer is acceptable. Teach nvme_set_features() not to try to
write to the NULL address.
For symmetry, make the same change to nvme_get_features(), despite the
fact that all current callers pass a valid result pointer.
I assume that this bug hasn't been reported in practice because
the callers that pass NULL are all in the SCSI translation layer
and no one uses the relevant operations.
Thierry Reding [Fri, 12 Aug 2016 14:00:53 +0000 (16:00 +0200)]
drm/tegra: dsi: Enhance runtime power management
The MIPI DSI output on Tegra SoCs requires some external logic to
calibrate the MIPI pads before a video signal can be transmitted. This
MIPI calibration logic requires to be powered on while the MIPI pads are
being used, which is currently done as part of the DSI driver's probe
implementation.
This is suboptimal because it will leave the MIPI calibration logic
powered up even if the DSI output is never used.
On Tegra114 and earlier this behaviour also causes the driver to hang
while trying to power up the MIPI calibration logic because the power
partition that contains the MIPI calibration logic will be powered on
by the display controller at output pipeline configuration time. Thus
the power up sequence for the MIPI calibration logic happens before
it's power partition is guaranteed to be enabled.
Fix this by splitting up the API into a request/free pair of functions
that manage the runtime dependency between the DSI and the calibration
modules (no registers are accessed) and a set of enable, calibrate and
disable functions that program the MIPI calibration logic at points in
time where the power partition is really enabled.
While at it, make sure that the runtime power management also works in
ganged mode, which is currently also broken.
Reported-by: Jonathan Hunter <jonathanh@nvidia.com> Tested-by: Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Will Deacon [Wed, 24 Aug 2016 09:07:14 +0000 (10:07 +0100)]
perf/core: Use this_cpu_ptr() when stopping AUX events
When tearing down an AUX buf for an event via perf_mmap_close(),
__perf_event_output_stop() is called on the event's CPU to ensure that
trace generation is halted before the process of unmapping and
freeing the buffer pages begins.
The callback is performed via cpu_function_call(), which ensures that it
runs with interrupts disabled and is therefore not preemptible.
Unfortunately, the current code grabs the per-cpu context pointer using
get_cpu_ptr(), which unnecessarily disables preemption and doesn't pair
the call with put_cpu_ptr(), leading to a preempt_count() imbalance and
a BUG when freeing the AUX buffer later on:
Mark Rutland [Tue, 9 Aug 2016 10:03:56 +0000 (11:03 +0100)]
MAINTAINERS: Add ARM ARCHITECTED TIMER entry
The ARM architected timer driver falls under the drivers/clocksource/
catch-all in MAINTAINERS, and get_maintainers.pl doesn't suggest a
number of people who should be Cc'd.
The ARM architected timer is a core component of ARMv7+VE and ARMv8, and
is critical to the correct operation of both architecture ports (and
their respective KVM code), and patches to it should have review by
knowledgeable interested parties.
This patch adds a MAINTAINERS entry for the driver and its low-level
arch components, such that get_maintainer.pl will always include
relevant interested parties for modifications to the driver. For the
timebeing, this means myself and Marc Zyngier.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1470737036-2082-1-git-send-email-mark.rutland@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
projects / linux-stable / log