In the current driver, OOB bytes are accessed in raw mode, and when a
page access is done with NDCR_SPARE_EN set and NDCR_ECC_EN cleared, the
driver must read the whole spare area (64 bytes in case of a 2k page,
16 bytes for a 512 page). The driver was only reading the free OOB
bytes, which was leaving some unread data in the FIFO and was somehow
leading to a timeout.
We could patch the driver to read ->spare_size + ->ecc_size instead of
just ->spare_size when READOOB is requested, but we'd better make
in-band and OOB accesses consistent.
Since the driver is always accessing in-band data in non-raw mode (with
the ECC engine enabled), we should also access OOB data in this mode.
That's particularly useful when using the BCH engine because in this
mode the free OOB bytes are also ECC protected.
Fixes: 43bcfd2bb24a ("mtd: nand: pxa3xx: Add driver-specific ECC BCH support") Reported-by: Sean Nyekjær <sean.nyekjaer@prevas.dk> Tested-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Tested-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The recent changes for PTI touch cpu_tlbstate from various tlb_flush
inlines. cpu_tlbstate is exported as GPL symbol, so this causes a
regression when building out of tree drivers for certain graphics cards.
Aside of that the export was wrong since it was introduced as it should
have been EXPORT_PER_CPU_SYMBOL_GPL().
Use the correct PER_CPU export and drop the _GPL to restore the previous
state which allows users to utilize the cards they payed for.
As always I'm really thrilled to make this kind of change to support the
#friends (or however the hot hashtag of today is spelled) from that closet
sauce graphics corp.
Fixes: 1e02ce4cccdc ("x86: Store a per-cpu shadow copy of CR4") Fixes: 6fd166aae78c ("x86/mm: Use/Fix PCID to optimize user/kernel switches") Reported-by: Kees Cook <keescook@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Backlund <tmb@mageia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The size for the Microcode Patch Block (MPB) for an AMD family 17h
processor is 3200 bytes. Add a #define for fam17h so that it does
not default to 2048 bytes and fail a microcode load/update.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/20171130224640.15391.40247.stgit@tlendack-t1.amdoffice.net Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Alice Ferrazzi <alicef@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This used to setup the LP_COUNT register automatically, but now has been
removed.
There was an earlier fix 3c7c7a2fc8811 which fixed instance in delay.h but
somehow missed this one as gcc change had not made its way into
production toolchains and was not pedantic as it is now !
For PCI devices behind an aliasing PCIe-to-PCI/X bridge, the bridge
alias to DevFn 0.0 on the subordinate bus may match the original RID of
the device, resulting in the same SID being present in the device's
fwspec twice. This causes trouble later in arm_smmu_write_strtab_ent()
when we wind up visiting the STE a second time and find it already live.
Avoid the issue by giving arm_smmu_install_ste_for_dev() the cleverness
to skip over duplicates. It seems mildly counterintuitive compared to
preventing the duplicates from existing in the first place, but since
the DT and ACPI probe paths build their fwspecs differently, this is
actually the cleanest and most self-contained way to deal with it.
Fixes: 8f78515425da ("iommu/arm-smmu: Implement of_xlate() for SMMUv3") Reported-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com> Tested-by: Jayachandran C. <jnair@caviumnetworks.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kasan reports a double free when finalise_stage_fn fails: the io_pgtable
ops are freed by arm_smmu_domain_finalise and then again by
arm_smmu_domain_free. Prevent this by leaving pgtbl_ops empty on failure.
Fixes: 48ec83bcbcf5 ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices") Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
complete_signal() checks SIGNAL_UNKILLABLE before it starts to destroy
the thread group, today this is wrong in many ways.
If nothing else, fatal_signal_pending() should always imply that the
whole thread group (except ->group_exit_task if it is not NULL) is
killed, this check breaks the rule.
After the previous changes we can rely on sig_task_ignored();
sig_fatal(sig) && SIGNAL_UNKILLABLE can only be true if we actually want
to kill this task and sig == SIGKILL OR it is traced and debugger can
intercept the signal.
This should hopefully fix the problem reported by Dmitry. This
test-case
static int init(void *arg)
{
for (;;)
pause();
}
int main(void)
{
char stack[16 * 1024];
for (;;) {
int pid = clone(init, stack + sizeof(stack)/2,
CLONE_NEWPID | SIGCHLD, NULL);
assert(pid > 0);
triggers the WARN_ON_ONCE(!(task->jobctl & JOBCTL_STOP_PENDING)) in
task_participate_group_stop(). do_signal_stop()->signal_group_exit()
checks SIGNAL_GROUP_EXIT and return false, but task_set_jobctl_pending()
checks fatal_signal_pending() and does not set JOBCTL_STOP_PENDING.
And his should fix the minor security problem reported by Kyle,
SECCOMP_RET_TRACE can miss fatal_signal_pending() the same way if the
task is the root of a pid namespace.
Change sig_task_ignored() to drop the SIG_DFL && !sig_kernel_only()
signals even if force == T. This simplifies the next change and this
matches the same check in get_signal() which will drop these signals
anyway.
The comment in sig_ignored() says "Tracers may want to know about even
ignored signals" but SIGKILL can not be reported to debugger and it is
just wrong to return 0 in this case: SIGKILL should only kill the
SIGNAL_UNKILLABLE task if it comes from the parent ns.
Change sig_ignored() to ignore ->ptrace if sig == SIGKILL and rely on
sig_task_ignored().
SISGTOP coming from within the namespace is not really right too but at
least debugger can intercept it, and we can't drop it here because this
will break "gdb -p 1": ptrace_attach() won't work. Perhaps we will add
another ->ptrace check later, we will see.
In testing, we found that nfsd threads may call set_groups in parallel
for the same entry cached in auth.unix.gid, racing in the call of
groups_sort, corrupting the groups for that entry and leading to
permission denials for the client.
This patch:
- Make groups_sort globally visible.
- Move the call to groups_sort to the modifiers of group_info
- Remove the call to groups_sort from set_groups
Link: http://lkml.kernel.org/r/20171211151420.18655-1-thiago.becker@gmail.com Signed-off-by: Thiago Rafael Becker <thiago.becker@gmail.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: NeilBrown <neilb@suse.com> Acked-by: "J. Bruce Fields" <bfields@fieldses.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For writes, we can get a completion in while we're still iterating
the request and bio chain. If that happens, we're reading freed
memory and we can crash.
Break out after the last segment and avoid having the iterator
read freed memory.
Fix the default for fscache_maybe_release_page() for when the cookie isn't
valid or the page isn't cached. It mustn't return false as that indicates
the page cannot yet be freed.
The problem with the default is that if, say, there's no cache, but a
network filesystem's pages are using up almost all the available memory, a
system can OOM because the filesystem ->releasepage() op will not allow
them to be released as fscache_maybe_release_page() incorrectly prevents
it.
This can be tested by writing a sequence of 512MiB files to an AFS mount.
It does not affect NFS or CIFS because both of those wrap the call in a
check of PG_fscache and it shouldn't bother Ceph as that only has
PG_private set whilst writeback is in progress. This might be an issue for
9P, however.
Note that the pages aren't entirely stuck. Removing a file or unmounting
will clear things because that uses ->invalidatepage() instead.
Fixes: 201a15428bd5 ("FS-Cache: Handle pages pending storage that get evicted under OOM conditions") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Tested-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Include the OF-based modalias in the uevent sent when registering devices
on the sunxi RSB bus, so that user space has a chance to autoload the
kernel module for the device.
Fixes a regression caused by commit 3f241bfa60bd ("arm64: allwinner: a64:
pine64: Use dcdc1 regulator for mmc0"). When the axp20x-rsb module for
the AXP803 PMIC is built as a module, it is not loaded and the system
ends up with an disfunctional MMC controller.
Fixes: d787dcdb9c8f ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus") Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pcrypt is using the old way of freeing instances, where the ->free()
method specified in the 'struct crypto_template' is passed a pointer to
the 'struct crypto_instance'. But the crypto_instance is being
kfree()'d directly, which is incorrect because the memory was actually
allocated as an aead_instance, which contains the crypto_instance at a
nonzero offset. Thus, the wrong pointer was being kfree()'d.
Fix it by switching to the new way to free aead_instance's where the
->free() method is specified in the aead_instance itself.
Reported-by: syzbot <syzkaller@googlegroups.com> Fixes: 0496f56065e0 ("crypto: pcrypt - Add support for new AEAD interface") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the rfc7539 template was instantiated with a hash algorithm with
digest size larger than 16 bytes (POLY1305_DIGEST_SIZE), then the digest
overran the 'tag' buffer in 'struct chachapoly_req_ctx', corrupting the
subsequent memory, including 'cryptlen'. This caused a crash during
crypto_skcipher_decrypt().
Fix it by, when instantiating the template, requiring that the
underlying hash algorithm has the digest size expected for Poly1305.
queue_cache_init is first called for the Control Word Queue
(n2_crypto_probe). At that time, queue_cache[0] is NULL and a new
kmem_cache will be allocated. If the subsequent n2_register_algs call
fails, the kmem_cache will be released in queue_cache_destroy, but
queue_cache_init[0] is not set back to NULL.
So when the Module Arithmetic Unit gets probed next (n2_mau_probe),
queue_cache_init will not allocate a kmem_cache again, but leave it
as its bogus value, causing a BUG() to trigger when queue_cache[0] is
eventually passed to kmem_cache_zalloc:
n2_crypto: Found N2CP at /virtual-devices@100/n2cp@7
n2_crypto: Registered NCS HVAPI version 2.0
called queue_cache_init
n2_crypto: md5 alg registration failed
n2cp f028687c: /virtual-devices@100/n2cp@7: Unable to register algorithms.
called queue_cache_destroy
n2cp: probe of f028687c failed with error -22
n2_crypto: Found NCP at /virtual-devices@100/ncp@6
n2_crypto: Registered NCS HVAPI version 2.0
called queue_cache_init
kernel BUG at mm/slab.c:2993!
Call Trace:
[0000000000604488] kmem_cache_alloc+0x1a8/0x1e0
(inlined) kmem_cache_zalloc
(inlined) new_queue
(inlined) spu_queue_setup
(inlined) handle_exec_unit
[0000000010c61eb4] spu_mdesc_scan+0x1f4/0x460 [n2_crypto]
[0000000010c62b80] n2_mau_probe+0x100/0x220 [n2_crypto]
[000000000084b174] platform_drv_probe+0x34/0xc0
Signed-off-by: Jan Engelhardt <jengelh@inai.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As Tsukada explains, the time_is_before_jiffies(acct->needcheck) check
is very wrong, we need time_is_after_jiffies() to make sys_acct() work.
Ignoring the overflows, the code should "goto out" if needcheck >
jiffies, while currently it checks "needcheck < jiffies" and thus in the
likely case check_free_space() does nothing until jiffies overflow.
In particular this means that sys_acct() is simply broken, acct_on()
sets acct->needcheck = jiffies and expects that check_free_space()
should set acct->active = 1 after the free-space check, but this won't
happen if jiffies increments in between.
This was broken by commit 32dc73086015 ("get rid of timer in
kern/acct.c") in 2011, then another (correct) commit 795a2f22a8ea
("acct() should honour the limits from the very beginning") made the
problem more visible.
Link: http://lkml.kernel.org/r/20171213133940.GA6554@redhat.com Fixes: 32dc73086015 ("get rid of timer in kern/acct.c") Reported-by: TSUKADA Koutaro <tsukada@ascade.co.jp> Suggested-by: TSUKADA Koutaro <tsukada@ascade.co.jp> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Thu, 4 Jan 2018 21:41:55 +0000 (13:41 -0800)]
kaiser: Set _PAGE_NX only if supported
This resolves a crash if loaded under qemu + haxm under windows.
See https://www.spinics.net/lists/kernel/msg2689835.html for details.
Here is a boot log (the log is from chromeos-4.4, but Tao Wu says that
the same log is also seen with vanilla v4.4.110-rc1).
The crash part of this problem may be solved with the following patch
(thanks to Hugh for the hint). There is still another problem, though -
with this patch applied, the qemu session aborts with "VCPU Shutdown
request", whatever that means.
Jiri Kosina [Tue, 2 Jan 2018 13:19:49 +0000 (14:19 +0100)]
kaiser: disabled on Xen PV
Kaiser cannot be used on paravirtualized MMUs (namely reading and writing CR3).
This does not work with KAISER as the CR3 switch from and to user space PGD
would require to map the whole XEN_PV machinery into both.
More importantly, enabling KAISER on Xen PV doesn't make too much sense, as PV
guests use distinct %cr3 values for kernel and user already.
Let kaiser_flush_tlb_on_return_to_user() do the X86_FEATURE_PCID
check, instead of each caller doing it inline first: nobody needs
to optimize for the noPCID case, it's clearer this way, and better
suits later changes. Replace those no-op X86_CR3_PCID_KERN_FLUSH lines
by a BUILD_BUG_ON() in load_new_mm_cr3(), in case something changes.
Hugh Dickins [Sun, 5 Nov 2017 01:23:24 +0000 (18:23 -0700)]
kaiser: asm/tlbflush.h handle noPGE at lower level
I found asm/tlbflush.h too twisty, and think it safer not to avoid
__native_flush_tlb_global_irq_disabled() in the kaiser_enabled case,
but instead let it handle kaiser_enabled along with cr3: it can just
use __native_flush_tlb() for that, no harm in re-disabling preemption.
(This is not the same change as Kirill and Dave have suggested for
upstream, flipping PGE in cr4: that's neat, but needs a cpu_has_pge
check; cr3 is enough for kaiser, and thought to be cheaper than cr4.)
Also delete the X86_FEATURE_INVPCID invpcid_flush_all_nonglobals()
preference from __native_flush_tlb(): unlike the invpcid_flush_all()
preference in __native_flush_tlb_global(), it's not seen in upstream
4.14, and was recently reported to be surprisingly slow.
Hugh Dickins [Sun, 29 Oct 2017 18:36:19 +0000 (11:36 -0700)]
kaiser: drop is_atomic arg to kaiser_pagetable_walk()
I have not observed a might_sleep() warning from setup_fixmap_gdt()'s
use of kaiser_add_mapping() in our tree (why not?), but like upstream
we have not provided a way for that to pass is_atomic true down to
kaiser_pagetable_walk(), and at startup it's far from a likely source
of trouble: so just delete the walk's is_atomic arg and might_sleep().
Hugh Dickins [Wed, 4 Oct 2017 03:49:04 +0000 (20:49 -0700)]
kaiser: use ALTERNATIVE instead of x86_cr3_pcid_noflush
Now that we're playing the ALTERNATIVE game, use that more efficient
method: instead of user-mapping an extra page, and reading an extra
cacheline each time for x86_cr3_pcid_noflush.
Neel has found that __stringify(bts $X86_CR3_PCID_NOFLUSH_BIT, %rax)
is a working substitute for the "bts $63, %rax" in these ALTERNATIVEs;
but the one line with $63 in looks clearer, so let's stick with that.
Worried about what happens with an ALTERNATIVE between the jump and
jump label in another ALTERNATIVE? I was, but have checked the
combinations in SWITCH_KERNEL_CR3_NO_STACK at entry_SYSCALL_64,
and it does a good job.
kaiser: add "nokaiser" boot option, using ALTERNATIVE
Added "nokaiser" boot option: an early param like "noinvpcid".
Most places now check int kaiser_enabled (#defined 0 when not
CONFIG_KAISER) instead of #ifdef CONFIG_KAISER; but entry_64.S
and entry_64_compat.S are using the ALTERNATIVE technique, which
patches in the preferred instructions at runtime. That technique
is tied to x86 cpu features, so X86_FEATURE_KAISER is fabricated.
Prior to "nokaiser", Kaiser #defined _PAGE_GLOBAL 0: revert that,
but be careful with both _PAGE_GLOBAL and CR4.PGE: setting them when
nokaiser like when !CONFIG_KAISER, but not setting either when kaiser -
neither matters on its own, but it's hard to be sure that _PAGE_GLOBAL
won't get set in some obscure corner, or something add PGE into CR4.
By omitting _PAGE_GLOBAL from __supported_pte_mask when kaiser_enabled,
all page table setup which uses pte_pfn() masks it out of the ptes.
It's slightly shameful that the same declaration versus definition of
kaiser_enabled appears in not one, not two, but in three header files
(asm/kaiser.h, asm/pgtable.h, asm/tlbflush.h). I felt safer that way,
than with #including any of those in any of the others; and did not
feel it worth an asm/kaiser_enabled.h - kernel/cpu/common.c includes
them all, so we shall hear about it if they get out of synch.
Cleanups while in the area: removed the silly #ifdef CONFIG_KAISER
from kaiser.c; removed the unused native_get_normal_pgd(); removed
the spurious reg clutter from SWITCH_*_CR3 macro stubs; corrected some
comments. But more interestingly, set CR4.PSE in secondary_startup_64:
the manual is clear that it does not matter whether it's 0 or 1 when
4-level-pts are enabled, but I was distracted to find cr4 different on
BSP and auxiliaries - BSP alone was adding PSE, in probe_page_size_mask().
Hugh Dickins [Tue, 5 Dec 2017 04:13:35 +0000 (20:13 -0800)]
kaiser: fix unlikely error in alloc_ldt_struct()
An error from kaiser_add_mapping() here is not at all likely, but
Eric Biggers rightly points out that __free_ldt_struct() relies on
new_ldt->size being initialized: move that up.
Hugh Dickins [Mon, 2 Oct 2017 17:57:24 +0000 (10:57 -0700)]
kaiser: kaiser_remove_mapping() move along the pgd
When removing the bogus comment from kaiser_remove_mapping(),
I really ought to have checked the extent of its bogosity: as
Neel points out, there is nothing to stop unmap_pud_range_nofree()
from continuing beyond the end of a pud (and starting in the wrong
position on the next).
Fix kaiser_remove_mapping() to constrain the extent and advance pgd
pointer correctly: use pgd_addr_end() macro as used throughout base
mm (but don't assume page-rounded start and size in this case).
But this bug was very unlikely to trigger in this backport: since
any buddy allocation is contained within a single pud extent, and
we are not using vmapped stacks (and are only mapping one page of
stack anyway): the only way to hit this bug here would be when
freeing a large modified ldt.
kaiser: paranoid_entry pass cr3 need to paranoid_exit
Neel Natu points out that paranoid_entry() was wrong to assume that
an entry that did not need swapgs would not need SWITCH_KERNEL_CR3:
paranoid_entry (used for debug breakpoint, int3, double fault or MCE;
though I think it's only the MCE case that is cause for concern here)
can break in at an awkward time, between cr3 switch and swapgs, but
its handling always needs kernel gs and kernel cr3.
Easy to fix in itself, but paranoid_entry() also needs to convey to
paranoid_exit() (and my reading of macro idtentry says paranoid_entry
and paranoid_exit are always paired) how to restore the prior state.
The swapgs state is already conveyed by %ebx (0 or 1), so extend that
also to convey when SWITCH_USER_CR3 will be needed (2 or 3).
(Yes, I'd much prefer that 0 meant no swapgs, whereas it's the other
way round: and a convention shared with error_entry() and error_exit(),
which I don't want to touch. Perhaps I should have inverted the bit
for switch cr3 too, but did not.)
paranoid_exit() would be straightforward, except for TRACE_IRQS: it
did TRACE_IRQS_IRETQ when doing swapgs, but TRACE_IRQS_IRETQ_DEBUG
when not: which is it supposed to use when SWITCH_USER_CR3 is split
apart from that? As best as I can determine, commit 5963e317b1e9
("ftrace/x86: Do not change stacks in DEBUG when calling lockdep")
missed the swapgs case, and should have used TRACE_IRQS_IRETQ_DEBUG
there too (the discrepancy has nothing to do with the liberal use
of _NO_STACK and _UNSAFE_STACK hereabouts: TRACE_IRQS_OFF_DEBUG has
just been used in all cases); discrepancy lovingly preserved across
several paranoid_exit() cleanups, but I'm now removing it.
Neel further indicates that to use SWITCH_USER_CR3_NO_STACK there in
paranoid_exit() is now not only unnecessary but unsafe: might corrupt
syscall entry's unsafe_stack_register_backup of %rax. Just use
SWITCH_USER_CR3: and delete SWITCH_USER_CR3_NO_STACK altogether,
before we make the mistake of using it again.
hughd adds: this commit fixes an issue in the Kaiser-without-PCIDs
part of the series, and ought to be moved earlier, if you decided
to make a release of Kaiser-without-PCIDs.
Hugh Dickins [Sun, 27 Aug 2017 23:24:27 +0000 (16:24 -0700)]
kaiser: x86_cr3_pcid_noflush and x86_cr3_pcid_user
Mostly this commit is just unshouting X86_CR3_PCID_KERN_VAR and
X86_CR3_PCID_USER_VAR: we usually name variables in lower-case.
But why does x86_cr3_pcid_noflush need to be __aligned(PAGE_SIZE)?
Ah, it's a leftover from when kaiser_add_user_map() once complained
about mapping the same page twice. Make it __read_mostly instead.
(I'm a little uneasy about all the unrelated data which shares its
page getting user-mapped too, but that was so before, and not a big
deal: though we call it user-mapped, it's not mapped with _PAGE_USER.)
And there is a little change around the two calls to do_nmi().
Previously they set the NOFLUSH bit (if PCID supported) when
forcing to kernel context before do_nmi(); now they also have the
NOFLUSH bit set (if PCID supported) when restoring context after:
nothing done in do_nmi() should require a TLB to be flushed here.
Why was 4 chosen for kernel PCID and 6 for user PCID?
No good reason in a backport where PCIDs are only used for Kaiser.
If we continue with those, then we shall need to add Andy Lutomirski's
4.13 commit 6c690ee1039b ("x86/mm: Split read_cr3() into read_cr3_pa()
and __read_cr3()"), which deals with the problem of read_cr3() callers
finding stray bits in the cr3 that they expected to be page-aligned;
and for hibernation, his 4.14 commit f34902c5c6c0 ("x86/hibernate/64:
Mask off CR3's PCID bits in the saved CR3").
But if 0 is used for kernel PCID, then there's no need to add in those
commits - whenever the kernel looks, it sees 0 in the lower bits; and
0 for kernel seems an obvious choice.
And I naughtily propose 128 for user PCID. Because there's a place
in _SWITCH_TO_USER_CR3 where it takes note of the need for TLB FLUSH,
but needs to reset that to NOFLUSH for the next occasion. Currently
it does so with a "movb $(0x80)" into the high byte of the per-cpu
quadword, but that will cause a machine without PCID support to crash.
Now, if %al just happened to have 0x80 in it at that point, on a
machine with PCID support, but 0 on a machine without PCID support...
(That will go badly wrong once the pgd can be at a physical address
above 2^56, but even with 5-level paging, physical goes up to 2^52.)
Hugh Dickins [Thu, 17 Aug 2017 22:00:37 +0000 (15:00 -0700)]
kaiser: load_new_mm_cr3() let SWITCH_USER_CR3 flush user
We have many machines (Westmere, Sandybridge, Ivybridge) supporting
PCID but not INVPCID: on these load_new_mm_cr3() simply crashed.
Flushing user context inside load_new_mm_cr3() without the use of
invpcid is difficult: momentarily switch from kernel to user context
and back to do so? I'm not sure whether that can be safely done at
all, and would risk polluting user context with kernel internals,
and kernel context with stale user externals.
Instead, follow the hint in the comment that was there: change
X86_CR3_PCID_USER_VAR to be a per-cpu variable, then load_new_mm_cr3()
can leave a note in it, for SWITCH_USER_CR3 on return to userspace to
flush user context TLB, instead of default X86_CR3_PCID_USER_NOFLUSH.
Which works well enough that there's no need to do it this way only
when invpcid is unsupported: it's a good alternative to invpcid here.
But there's a couple of inlines in asm/tlbflush.h that need to do the
same trick, so it's best to localize all this per-cpu business in
mm/kaiser.c: moving that part of the initialization from setup_pcid()
to kaiser_setup_pcid(); with kaiser_flush_tlb_on_return_to_user() the
function for noting an X86_CR3_PCID_USER_FLUSH. And let's keep a
KAISER_SHADOW_PGD_OFFSET in there, to avoid the extra OR on exit.
I did try to make the feature tests in asm/tlbflush.h more consistent
with each other: there seem to be far too many ways of performing such
tests, and I don't have a good grasp of their differences. At first
I converted them all to be static_cpu_has(): but that proved to be a
mistake, as the comment in __native_flush_tlb_single() hints; so then
I reversed and made them all this_cpu_has(). Probably all gratuitous
change, but that's the way it's working at present.
I am slightly bothered by the way non-per-cpu X86_CR3_PCID_KERN_VAR
gets re-initialized by each cpu (before and after these changes):
no problem when (as usual) all cpus on a machine have the same
features, but in principle incorrect. However, my experiment
to per-cpu-ify that one did not end well...
The kaiser update made an interesting choice, never to free any shadow
page tables. Contention on global spinlock was worrying, particularly
with it held across page table scans when freeing. Something had to be
done: I was going to add refcounting; but simply never to free them is
an appealing choice, minimizing contention without complicating the code
(the more a page table is found already, the less the spinlock is used).
But leaking pages in this way is also a worry: can we get away with it?
At the very least, we need a count to show how bad it actually gets:
in principle, one might end up wasting about 1/256 of memory that way
(1/512 for when direct-mapped pages have to be user-mapped, plus 1/512
for when they are user-mapped from the vmalloc area on another occasion
(but we don't have vmalloc'ed stacks, so only large ldts are vmalloc'ed).
Add per-cpu stat NR_KAISERTABLE: including 256 at startup for the
shared pgd entries, and 1 for each intermediate page table added
thereafter for user-mapping - but leave out the 1 per mm, for its
shadow pgd, because that distracts from the monotonic increase.
Shown in /proc/vmstat as nr_overhead (0 if kaiser not enabled).
In practice, it doesn't look so bad so far: more like 1/12000 after
nine hours of gtests below; and movable pageblock segregation should
tend to cluster the kaiser tables into a subset of the address space
(if not, they will be bad for compaction too). But production may
tell a different story: keep an eye on this number, and bring back
lighter freeing if it gets out of control (maybe a shrinker).
["nr_overhead" should of course say "nr_kaisertable", if it needs
to stay; but for the moment we are being coy, preferring that when
Joe Blow notices a new line in his /proc/vmstat, he does not get
too curious about what this "kaiser" stuff might be.]
We fail to see what CONFIG_KAISER_REAL_SWITCH is for: it seems to be
left over from early development, and now just obscures tricky parts
of the code. Delete it before adding PCIDs, or nokaiser boot option.
(Or if there is some good reason to keep the option, then it needs
a help text - and a "depends on KAISER", so that all those without
KAISER are not asked the question. But we'd much rather delete it.)
Hugh Dickins [Tue, 22 Aug 2017 03:11:43 +0000 (20:11 -0700)]
kaiser: cleanups while trying for gold link
While trying to get our gold link to work, four cleanups:
matched the gdt_page declaration to its definition;
in fiddling unsuccessfully with PERCPU_INPUT(), lined up backslashes;
lined up the backslashes according to convention in percpu-defs.h;
deleted the unused irq_stack_pointer addition to irq_stack_union.
Sad to report that aligning backslashes does not appear to help gold
align to 8192: but while these did not help, they are worth keeping.
kaiser: tidied up kaiser_add/remove_mapping slightly
Yes, unmap_pud_range_nofree()'s declaration ought to be in a
header file really, but I'm not sure we want to use it anyway:
so for now just declare it inside kaiser_remove_mapping().
And there doesn't seem to be such a thing as unmap_p4d_range(),
even in a 5-level paging tree.
Hugh Dickins [Wed, 23 Aug 2017 21:21:14 +0000 (14:21 -0700)]
kaiser: fix perf crashes
Avoid perf crashes: place debug_store in the user-mapped per-cpu area
instead of allocating, and use page allocator plus kaiser_add_mapping()
to keep the BTS and PEBS buffers user-mapped (that is, present in the
user mapping, though visible only to kernel and hardware). The PEBS
fixup buffer does not need this treatment.
The need for a user-mapped struct debug_store showed up before doing
any conscious perf testing: in a couple of kernel paging oopses on
Westmere, implicating the debug_store offset of the per-cpu area.
pjt has observed that nmi's second (nmi_from_kernel) call to do_nmi()
adjusted the %rdi regs arg, rightly when CONFIG_KAISER, but wrongly
when not CONFIG_KAISER.
Although the minimal change is to add an #ifdef CONFIG_KAISER around
the addq line, that looks cluttered, and I prefer how the first call
to do_nmi() handled it: prepare args in %rdi and %rsi before getting
into the CONFIG_KAISER block, since it does not touch them at all.
And while we're here, place the "#ifdef CONFIG_KAISER" that follows
each, to enclose the "Unconditionally restore CR3" comment: matching
how the "Unconditionally use kernel CR3" comment above is enclosed.
It is absurd that KAISER should depend on SMP, but apparently nobody
has tried a UP build before: which breaks on implicit declaration of
function 'per_cpu_offset' in arch/x86/mm/kaiser.c.
Now, you would expect that to be trivially fixed up; but looking at
the System.map when that block is #ifdef'ed out of kaiser_init(),
I see that in a UP build __per_cpu_user_mapped_end is precisely at
__per_cpu_user_mapped_start, and the items carefully gathered into
that section for user-mapping on SMP, dispersed elsewhere on UP.
So, some other kind of section assignment will be needed on UP,
but implementing that is not a priority: just make KAISER depend
on SMP for now.
Also inserted a blank line before the option, tidied up the
brief Kconfig help message, and added an "If unsure, Y".
Include linux/kaiser.h instead of asm/kaiser.h to build ldt.c without
CONFIG_KAISER. kaiser_add_mapping() does already return an error code,
so fix the FIXME.
kaiser: stack map PAGE_SIZE at THREAD_SIZE-PAGE_SIZE
Kaiser only needs to map one page of the stack; and
kernel/fork.c did not build on powerpc (no __PAGE_KERNEL).
It's all cleaner if linux/kaiser.h provides kaiser_map_thread_stack()
and kaiser_unmap_thread_stack() wrappers around asm/kaiser.h's
kaiser_add_mapping() and kaiser_remove_mapping(). And use
linux/kaiser.h in init/main.c to avoid the #ifdefs there.
native_pgd_clear() uses native_set_pgd(), so native_set_pgd() must
avoid setting the _PAGE_NX bit on an otherwise pgd_none() entry:
usually that just generated a warning on exit, but sometimes
more mysterious and damaging failures (our production machines
could not complete booting).
The original fix to this just avoided adding _PAGE_NX to
an empty entry; but eventually more problems surfaced with kexec,
and EFI mapping expected to be a problem too. So now instead
change native_set_pgd() to update shadow only if _PAGE_USER:
A few places (kernel/machine_kexec_64.c, platform/efi/efi_64.c for sure)
use set_pgd() to set up a temporary internal virtual address space, with
physical pages remapped at what Kaiser regards as userspace addresses:
Kaiser then assumes a shadow pgd follows, which it will try to corrupt.
This appears to be responsible for the recent kexec and kdump failures;
though it's unclear how those did not manifest as a problem before.
Ah, the shadow pgd will only be assumed to "follow" if the requested
pgd is on an even-numbered page: so I suppose it was going wrong 50%
of the time all along.
What we need is a flag to set_pgd(), to tell it we're dealing with
userspace. Er, isn't that what the pgd's _PAGE_USER bit is saying?
Add a test for that. But we cannot do the same for pgd_clear()
(which may be called to clear corrupted entries - set aside the
question of "corrupt in which pgd?" until later), so there just
rely on pgd_clear() not being called in the problematic cases -
with a WARN_ON_ONCE() which should fire half the time if it is.
But this is getting too big for an inline function: move it into
arch/x86/mm/kaiser.c (which then demands a boot/compressed mod);
and de-void and de-space native_get_shadow/normal_pgd() while here.
Also make an unnecessary change to KASLR's init_trampoline(): it was
using set_pgd() to assign a pgd-value to a global variable (not in a
pg directory page), which was rather scary given Kaiser's previous
set_pgd() implementation: not a problem now, but too scary to leave
as was, it could easily blow up if we have to change set_pgd() again.
Richard Fellner [Thu, 4 May 2017 12:26:50 +0000 (14:26 +0200)]
KAISER: Kernel Address Isolation
This patch introduces our implementation of KAISER (Kernel Address Isolation to
have Side-channels Efficiently Removed), a kernel isolation technique to close
hardware side channels on kernel address information.
To: <linux-kernel@vger.kernel.org>
To: <kernel-hardening@lists.openwall.com> Cc: <clementine.maurice@iaik.tugraz.at> Cc: <moritz.lipp@iaik.tugraz.at> Cc: Michael Schwarz <michael.schwarz@iaik.tugraz.at> Cc: Richard Fellner <richard.fellner@student.tugraz.at> Cc: Ingo Molnar <mingo@kernel.org> Cc: <kirill.shutemov@linux.intel.com> Cc: <anders.fogh@gdata-adan.de>
After several recent works [1,2,3] KASLR on x86_64 was basically
considered dead by many researchers. We have been working on an
efficient but effective fix for this problem and found that not mapping
the kernel space when running in user mode is the solution to this
problem [4] (the corresponding paper [5] will be presented at ESSoS17).
With this RFC patch we allow anybody to configure their kernel with the
flag CONFIG_KAISER to add our defense mechanism.
If there are any questions we would love to answer them.
We also appreciate any comments!
Cheers,
Daniel (+ the KAISER team from Graz University of Technology)
Add a cmdline_find_option() function to look for cmdline options that
take arguments. The argument is returned in a supplied buffer and the
argument length (regardless of whether it fits in the supplied buffer)
is returned, with -1 indicating not found.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/36b5f97492a9745dce27682305f990fc20e5cf8a.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix BBR so that upon notification of a loss recovery undo BBR resets
long-term bandwidth sampling.
Under high reordering, reordering events can be interpreted as loss.
If the reordering and spurious loss estimates are high enough, this
can cause BBR to spuriously estimate that we are seeing loss rates
high enough to trigger long-term bandwidth estimation. To avoid that
problem, this commit resets long-term bandwidth sampling on loss
recovery undo events.
Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix BBR so that upon notification of a loss recovery undo BBR resets
the full pipe detection (STARTUP exit) state machine.
Under high reordering, reordering events can be interpreted as loss.
If the reordering and spurious loss estimates are high enough, this
could previously cause BBR to spuriously estimate that the pipe is
full.
Since spurious loss recovery means that our overall sending will have
slowed down spuriously, this commit gives a flow more time to probe
robustly for bandwidth and decide the pipe is really full.
Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We added support for EXTPROC back in 2010 in commit 26df6d13406d ("tty:
Add EXTPROC support for LINEMODE") and the intent was to allow it to
override some (all?) ICANON behavior. Quoting from that original commit
message:
There is a new bit in the termios local flag word, EXTPROC.
When this bit is set, several aspects of the terminal driver
are disabled. Input line editing, character echo, and mapping
of signals are all disabled. This allows the telnetd to turn
off these functions when in linemode, but still keep track of
what state the user wants the terminal to be in.
but the problem turns out that "several aspects of the terminal driver
are disabled" is a bit ambiguous, and you can really confuse the n_tty
layer by setting EXTPROC and then causing some of the ICANON invariants
to no longer be maintained.
This fixes at least one such case (TIOCINQ) becoming unhappy because of
the confusion over whether ICANON really means ICANON when EXTPROC is set.
This basically makes TIOCINQ match the case of read: if EXTPROC is set,
we ignore ICANON. Also, make sure to reset the ICANON state ie EXTPROC
changes, not just if ICANON changes.
smpboot_setup_warm_reset_vector() and smpboot_restore_warm_reset_vector()
invoke local_flush_tlb() for no obvious reason.
Digging in history revealed that the original code in the 2.1 era added
those because the code manipulated a swapper_pg_dir pagetable entry. The
pagetable manipulation was removed long ago in the 2.3 timeframe, but the
TLB flush invocations stayed around forever.
Remove them along with the pointless pr_debug()s which come from the same 2.1
change.
The conditions in irq_exit() to invoke tick_nohz_irq_exit() which
subsequently invokes tick_nohz_stop_sched_tick() are:
if ((idle_cpu(cpu) && !need_resched()) || tick_nohz_full_cpu(cpu))
If need_resched() is not set, but a timer softirq is pending then this is
an indication that the softirq code punted and delegated the execution to
softirqd. need_resched() is not true because the current interrupted task
takes precedence over softirqd.
Invoking tick_nohz_irq_exit() in this case can cause an endless loop of
timer interrupts because the timer wheel contains an expired timer, but
softirqs are not yet executed. So it returns an immediate expiry request,
which causes the timer to fire immediately again. Lather, rinse and
repeat....
Prevent that by adding a check for a pending timer soft interrupt to the
conditions in tick_nohz_stop_sched_tick() which avoid calling
get_next_timer_interrupt(). That keeps the tick sched timer on the tick and
prevents a repetitive programming of an already expired timer.
Reported-by: Sebastian Siewior <bigeasy@linutronix.d> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712272156050.2431@nanos Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The timer wheel bases are not (re)initialized on CPU hotplug. That leaves
them with a potentially stale clk and next_expiry valuem, which can cause
trouble then the CPU is plugged.
Add a prepare callback which forwards the clock, sets next_expiry to far in
the future and reset the control flags to a known state.
Set base->must_forward_clk so the first timer which is queued will try to
forward the clock to current jiffies.
Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel") Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712272152200.2431@nanos Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During boot and before base::nohz_active is set in the timer bases, deferrable
timers are enqueued into the standard timer base. This works correctly as
long as base::nohz_active is false.
Once it base::nohz_active is set and a timer which was enqueued before that
is accessed the lock selector code choses the lock of the deferred
base. This causes unlocked access to the standard base and in case the
timer is removed it does not clear the pending flag in the standard base
bitmap which causes get_next_timer_interrupt() to return bogus values.
To prevent that, the deferrable timers must be enqueued in the deferrable
base, even when base::nohz_active is not set. Those deferrable timers also
need to be expired unconditional.
Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel") Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: rt@linutronix.de Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Link: https://lkml.kernel.org/r/20171222145337.633328378@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When plugging in a USB webcam I see the following message:
xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs
XHCI_TRUST_TX_LENGTH quirk?
handle_tx_event: 913 callbacks suppressed
All is quiet again with this patch (and I've done a fair but of soak
testing with the camera since).
USB 3.1 devices are not detected as 3.1 capable since 4.15-rc3 due to a
off by one in commit 81cf4a45360f ("USB: core: Add type-specific length
check of BOS descriptors")
It uses USB_DT_USB_SSP_CAP_SIZE() to get SSP capability size which takes
the zero based SSAC as argument, not the actual count of sublink speed
attributes.
USB3 spec 9.6.2.5 says "The number of Sublink Speed Attributes = SSAC + 1."
The type-specific length check patch was added to stable and needs to be
fixed there as well
Commit e0429362ab15
("usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e")
introduced quirk to workaround an issue with some Logitech webcams.
There is one more model that has the same issue - C925e, so applying
the same quirk as well.
See aforementioned commit message for detailed explanation of the problem.
usbip driver is leaking socket pointer address in messages. Remove
the messages that aren't useful and print sockfd in the ones that
are useful for debugging.
usbip bind writes commands followed by random string when writing to
match_busid attribute in sysfs, caused by using full variable size
instead of string length.
Any modification to the takeover IP-ranges requires that we re-evaluate
which IP addresses are takeover-eligible. Otherwise we might do takeover
for some addresses when we no longer should, or vice-versa.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Modifying the flags of an IP addr object needs to be protected against
eg. concurrent removal of the same object from the IP table.
Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When takeover is switched off, current code clears the 'TAKEOVER' flag on
all IPs. But the flag is also used for RXIP addresses, and those should
not be affected by the takeover mode.
Fix the behaviour by consistenly applying takover logic to NORMAL
addresses only.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Just as for an explicit enable/disable, toggling the takeover mode also
requires that the IP addresses get updated. Otherwise all IPs that were
added to the table before the mode-toggle, get registered with the old
settings.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calling add/remove VXLAN port, a lock must be held in order to
prevent race scenarios when more than one add/remove happens at the
same time.
Fix by holding our state_lock (mutex) as done by all other parts of the
driver.
Note that the spinlock protecting the radix-tree is still needed in
order to synchronize radix-tree access from softirq context.
Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A refcount mechanism must be implemented in order to prevent unwanted
scenarios such as:
- Open an IPv4 VXLAN interface
- Open an IPv6 VXLAN interface (different socket)
- Remove one of the interfaces
With current implementation, the UDP port will be removed from our VXLAN
database and turn off the offloads for the other interface, which is
still active.
The reference count mechanism will only allow UDP port removals once all
consumers are gone.
Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mlx5e_vxlan_lookup_port is called both from mlx5e_add_vxlan_port (user
context) and mlx5e_features_check (softirq), but the lock acquired does
not disable bottom half and might result in deadlock. Fix it by simply
replacing spin_lock() with spin_lock_bh().
While at it, replace all unnecessary spin_lock_irq() to spin_lock_bh().
lockdep's WARNING: inconsistent lock state
[ 654.028136] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[ 654.028229] swapper/5/0 [HC0[0]:SC1[9]:HE1:SE0] takes:
[ 654.028321] (&(&vxlan_db->lock)->rlock){+.?.}, at: [<ffffffffa06e7f0e>] mlx5e_vxlan_lookup_port+0x1e/0x50 [mlx5_core]
[ 654.028528] {SOFTIRQ-ON-W} state was registered at:
[ 654.028607] _raw_spin_lock+0x3c/0x70
[ 654.028689] mlx5e_vxlan_lookup_port+0x1e/0x50 [mlx5_core]
[ 654.028794] mlx5e_vxlan_add_port+0x2e/0x120 [mlx5_core]
[ 654.028878] process_one_work+0x1e9/0x640
[ 654.028942] worker_thread+0x4a/0x3f0
[ 654.029002] kthread+0x141/0x180
[ 654.029056] ret_from_fork+0x24/0x30
[ 654.029114] irq event stamp: 579088
[ 654.029174] hardirqs last enabled at (579088): [<ffffffff818f475a>] ip6_finish_output2+0x49a/0x8c0
[ 654.029309] hardirqs last disabled at (579087): [<ffffffff818f470e>] ip6_finish_output2+0x44e/0x8c0
[ 654.029446] softirqs last enabled at (579030): [<ffffffff810b3b3d>] irq_enter+0x6d/0x80
[ 654.029567] softirqs last disabled at (579031): [<ffffffff810b3c05>] irq_exit+0xb5/0xc0
[ 654.029684] other info that might help us debug this:
[ 654.029781] Possible unsafe locking scenario:
The assumption that the next header field contains the transport
protocol is wrong for IPv6 packets with extension headers.
Instead, we should look the inner-most next header field in the buffer.
This will fix TSO offload for tunnels over IPv6 with extension headers.
Performance testing: 19.25x improvement, cool!
Measuring bandwidth of 16 threads TCP traffic over IPv6 GRE tap.
CPU: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz
NIC: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]
TSO: Enabled
Before: 4,926.24 Mbps
Now : 94,827.91 Mbps
Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In mlx5_ifc, struct size was not complete, and thus driver was sending
garbage after the last defined field. Fixed it by adding reserved field
to complete the struct size.
In addition, rename all set_rate_limit to set_pp_rate_limit to be
compliant with the Firmware <-> Driver definition.
Mark tcp_sock during a SACK reneging event and invalidate rate samples
while marked. Such rate samples may overestimate bw by including packets
that were SACKed before reneging.
In above example the rate sample taken after the last ack will count
7001-38001 as delivered while the actual delivery rate likely could
be much lower i.e. 7001-8001.
This patch adds a new field tcp_sock.sack_reneg and marks it when we
declare SACK reneging and entering TCP_CA_Loss, and unmarks it after
the last rate sample was taken before moving back to TCP_CA_Open. This
patch also invalidates rate samples taken while tcp_sock.is_sack_reneg
is set.
Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection") Signed-off-by: Yousuk Seung <ysseung@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Priyaranjan Jha <priyarjha@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
skb_complete_tx_timestamp must ingest the skb it is passed. Call
kfree_skb if the skb cannot be enqueued.
Fixes: b245be1f4db1 ("net-timestamp: no-payload only sysctl") Fixes: 9ac25fc06375 ("net: fix socket refcounting in skb_complete_tx_timestamp()") Reported-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Under some circumstances driver will perform PHY reset in
ksz9031_read_status() to fix autoneg failure case (idle error count =
0xFF). When this happens ksz9031 will not detect link status change any
more when connecting to Netgear 1G switch (link can be recovered sometimes by
restarting netdevice "ifconfig down up"). Reproduced with TI am572x board
equipped with ksz9031 PHY while connecting to Netgear 1G switch.
Fix the issue by reconfiguring autonegotiation after PHY reset in
ksz9031_read_status().
Fixes: d2fd719bcb0e ("net/phy: micrel: Add workaround for bad autoneg") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Also, put_net() on the right cpu may reorder with left's cpu
list_replace_init(&cleanup_list, ..), and then cleanup_list
will be corrupted.
Since cleanup_net() is executed in worker thread, while
put_net(peer) can happen everywhere, there should be
enough time for concurrent get_net_ns_by_id() to pick
the peer up, and the race does not seem to be unlikely.
The patch fixes the problem in standard way.
(Also, there is possible problem in peernet2id_alloc(), which requires
check for net::count under nsid_lock and maybe_get_net(peer), but
in current stable kernel it's used under rtnl_lock() and it has to be
safe. Openswitch begun to use peernet2id_alloc(), and possibly it should
be fixed too. While this is not in stable kernel yet, so I'll send
a separate message to netdev@ later).
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Fixes: 0c7aecd4bde4 "netns: add rtnl cmd to add and get peer netns ids" Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The FEC Receive Control Register has a 14 bit field indicating the
longest frame that may be received. It is being set to 1522. Frames
longer than this are discarded, but counted as being in error.
When using DSA, frames from the switch has an additional header,
either 4 or 8 bytes if a Marvell switch is used. Thus a full MTU frame
of 1522 bytes received by the switch on a port becomes 1530 bytes when
passed to the host via the FEC interface.
Change the maximum receive size to 2048 - 64, where 64 is the maximum
rx_alignment applied on the receive buffer for AVB capable FEC
cores. Use this value also for the maximum receive buffer size. The
driver is already allocating a receive SKB of 2048 bytes, so this
change should not have any significant effects.
Tested on imx51, imx6, vf610.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The early call to br_stp_change_bridge_id in bridge's newlink can cause
a memory leak if an error occurs during the newlink because the fdb
entries are not cleaned up if a different lladdr was specified, also
another minor issue is that it generates fdb notifications with
ifindex = 0. Another unrelated memory leak is the bridge sysfs entries
which get added on NETDEV_REGISTER event, but are not cleaned up in the
newlink error path. To remove this special case the call to
br_stp_change_bridge_id is done after netdev register and we cleanup the
bridge on changelink error via br_dev_delete to plug all leaks.
This patch makes netlink bridge destruction on newlink error the same as
dellink and ioctl del which is necessary since at that point we have a
fully initialized bridge device.
To reproduce the issue:
$ ip l add br0 address 00:11:22:33:44:55 type bridge group_fwd_mask 1
RTNETLINK answers: Invalid argument
$ rmmod bridge
[ 1822.142525] =============================================================================
[ 1822.143640] BUG bridge_fdb_cache (Tainted: G O ): Objects remaining in bridge_fdb_cache on __kmem_cache_shutdown()
[ 1822.144821] -----------------------------------------------------------------------------
projects / linux-stable / log