An earlier patch I sent reduced the stack usage enough to get
below the warning limit, and I could show this was safe, but with
GCC_PLUGIN_STRUCTLEAK_BYREF_ALL, it gets worse again because large stack
variables in the same function no longer overlap:
drivers/staging/rtl8712/rtl871x_ioctl_linux.c: In function 'translate_scan.isra.2':
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:322:1: error: the frame size of 1200 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Split out the largest two blocks in the affected function into two
separate functions and mark those noinline_for_stack.
The change to mapping V4L2 to MMAL buffers 1:1 didn't handle
the condition we get with raw pixel buffers (eg YUV and RGB)
direct from the camera's stills port. That sends the pixel buffer
and then an empty buffer with the EOS flag set. The EOS buffer
wasn't handled and returned an error up the stack.
Handle the condition correctly by returning it to the component
if streaming, or returning with an error if stopping streaming.
Fixes: 938416707071 ("staging: bcm2835-camera: Remove V4L2/MMAL buffer remapping") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before commit "staging: bcm2835-camera: Remove V4L2/MMAL buffer remapping"
there was a need to ensure that there were sufficient buffers supplied from
the user to cover those being sent to the VPU (always 1).
Now the buffers are linked 1:1 between MMAL and V4L2,
therefore there is no need for that check, and indeed it is wrong
as there is no need to submit all the buffers before starting streaming.
Fixes: 938416707071 ("staging: bcm2835-camera: Remove V4L2/MMAL buffer remapping") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit "staging: bcm2835-camera: Replace open-coded idr with a struct idr."
replaced an internal implementation of an idr with the standard functions
and a spinlock. idr_alloc(GFP_KERNEL) can sleep whilst calling kmem_cache_alloc
to allocate the new node, but this is not valid whilst in an atomic context
due to the spinlock.
There is no need for this to be a spinlock as a standard mutex is
sufficient.
Fixes: 950fd867c635 ("staging: bcm2835-camera: Replace open-coded idr with a struct idr.") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the default event case switchdev_work is being leaked because
nothing is queued for work. Fix this by kfree'ing switchdev_work
before returning NOTIFY_DONE.
Addresses-Coverity: ("Resource leak") Fixes: 44baaa43d7cc ("staging: fsl-dpaa2/ethsw: Add Freescale DPAA2 Ethernet Switch driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The killable version of wait_event() is meant to be used on situations
where it should not fail at all costs, but still have the convenience of
being able to kill it if really necessary. Wait events in VCHIQ doesn't
fit this criteria, as it's mainly used as an interface to V4L2 and ALSA
devices.
Fixes: 852b2876a8a8 ("staging: vchiq: rework remove_event handling") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The killable version of wait_for_completion() is meant to be used on
situations where it should not fail at all costs, but still have the
convenience of being able to kill it if really necessary. VCHIQ doesn't
fit this criteria, as it's mainly used as an interface to V4L2 and ALSA
devices.
Fixes: a772f116702e ("staging: vchiq: switch to wait_for_completion_killable") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The killable version of down() is meant to be used on situations where
it should not fail at all costs, but still have the convenience of being
able to kill it if really necessary. VCHIQ doesn't fit this criteria, as
it's mainly used as an interface to V4L2 and ALSA devices.
Fixes: ff5979ad8636 ("staging: vchiq_2835_arm: quit using custom down_interruptible()") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The VMCI handle array has an integer overflow in
vmci_handle_arr_append_entry when it tries to expand the array. This can be
triggered from a guest, since the doorbell link hypercall doesn't impose a
limit on the number of doorbell handles that a VM can create in the
hypervisor, and these handles are stored in a handle array.
In this change, we introduce a mandatory max capacity for handle
arrays/lists to avoid excessive memory usage.
This patch follows Alan Stern's recent patch:
"p54: Fix race between disconnect and firmware loading"
that overhauled carl9170 buggy firmware loading and driver
unbinding procedures.
Since the carl9170 code was adapted from p54 it uses the
same functions and is likely to have the same problem, but
it's just that the syzbot hasn't reproduce them (yet).
a summary from the changes (copied from the p54 patch):
* Call usb_driver_release_interface() rather than
device_release_driver().
* Lock udev (the interface's parent) before unbinding the
driver instead of locking udev->parent.
* During the firmware loading process, take a reference
to the USB interface instead of the USB device.
* Don't take an unnecessary reference to the device during
probe (and then don't drop it during disconnect).
and
* Make sure to prevent use-after-free bugs by explicitly
setting the driver context to NULL after signaling the
completion.
Cc: <stable@vger.kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add missing vdda-supply, analog power supply, to STM32 ADC. When vdda is
an independent supply, it needs to be properly turned on or off to supply
the ADC.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Fixes: 1add69880240 ("iio: adc: Add support for STM32 ADC core"). Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The buffer copy functions assumed the caller would ensure
correct alignment and that the memory to be copied was
completely within the binder buffer. There have been
a few cases discovered by syzkallar where a malformed
transaction created by a user could violated the
assumptions and resulted in a BUG_ON.
The fix is to remove the BUG_ON and always return the
error to be handled appropriately by the caller.
Acked-by: Martijn Coenen <maco@android.com> Reported-by: syzbot+3ae18325f96190606754@syzkaller.appspotmail.com Fixes: bde4a19fc04f ("binder: use userspace pointer as base of buffer space") Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Todd Kjos <tkjos@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzkallar found a 32-byte memory leak in a rarely executed error
case. The transaction complete work item was not freed if put_user()
failed when writing the BR_TRANSACTION_COMPLETE to the user command
buffer. Fixed by freeing it before put_user() is called.
With CONFIG_LKDTM=y and make OBJCOPY=llvm-objcopy, llvm-objcopy errors:
llvm-objcopy: error: --set-section-flags=.text conflicts with
--rename-section=.text=.rodata
Rather than support setting flags then renaming sections vs renaming
then setting flags, it's simpler to just change both at the same time
via --rename-section. Adding the load flag is required for GNU objcopy
to mark .rodata Type as PROGBITS after the rename.
This can be verified with:
$ readelf -S drivers/misc/lkdtm/rodata_objcopy.o
...
Section Headers:
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
...
[ 1] .rodata PROGBITS 000000000000000000000040 00000000000000040000000000000000 A 0 0 4
...
Which shows that .text is now renamed .rodata, the alloc flag A is set,
the type is PROGBITS, and the section is not flagged as writeable W.
The PixArt OEM mice are known for disconnecting every minute in
runlevel 1 or 3 if they are not always polled. So add quirk
ALWAYS_POLL for this Alienware branded Primax mouse as well.
Daniel Schepler (@dschepler) reported and tested the quirk.
Reference: https://github.com/sriemer/fix-linux-mouse/issues/15
The interrupt handler `pci230_interrupt()` causes a null pointer
dereference for a PCI260 card. There is no analog output subdevice for
a PCI260. The `dev->write_subdev` subdevice pointer and therefore the
`s_ao` subdevice pointer variable will be `NULL` for a PCI260. The
following call near the end of the interrupt handler results in the null
pointer dereference for a PCI260:
comedi_handle_events(dev, s_ao);
Fix it by only calling the above function if `s_ao` is valid.
Note that the other uses of `s_ao` in the calls
`pci230_handle_ao_nofifo(dev, s_ao);` and `pci230_handle_ao_fifo(dev,
s_ao);` will never be reached for a PCI260, so they are safe.
Fixes: 39064f23284c ("staging: comedi: amplc_pci230: use comedi_handle_events()") Cc: <stable@vger.kernel.org> # v3.19+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For the error path in wilc_wlan_initialize(), the resources are not
cleanup in the correct order. Reverted the previous changes and use the
correct order to free during error condition.
The interrupt handler `dt282x_interrupt()` causes a null pointer
dereference for those supported boards that have no analog output
support. For these boards, `dev->write_subdev` will be `NULL` and
therefore the `s_ao` subdevice pointer variable will be `NULL`. In that
case, the following call near the end of the interrupt handler results
in a null pointer dereference:
comedi_handle_events(dev, s_ao);
Fix it by only calling the above function if `s_ao` is valid.
(There are other uses of `s_ao` by the interrupt handler that may or may
not be reached depending on values of hardware registers. Trust that
they are reliable for now.)
Note:
commit 4f6f009b204f ("staging: comedi: dt282x: use comedi_handle_events()")
propagates an earlier error from
commit f21c74fa4cfe ("staging: comedi: dt282x: use cfc_handle_events()").
Fixes: 4f6f009b204f ("staging: comedi: dt282x: use comedi_handle_events()") Cc: <stable@vger.kernel.org> # v3.19+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a crash that got introduced when the
mentioned patch replaced the direct list_head access
with skb_peek_tail(). When the device is starting up,
there are no entries in the queue, so previously to
"Use skb_peek_tail() instead..." the target_skb would
end up as the tail and head pointer which then could
be used by __skb_queue_after to fill the empty queue.
With skb_peek_tail() in its place will instead just
return NULL which then causes a crash in the
__skb_queue_after().
Cc: stable@vger.kernel.org Fixes: e3554197fc8f ("p54: Use skb_peek_tail() instead of direct head pointer accesses.") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Writing 4CC commands with tps6598x_write_4cc() already has
a pointer arg, don't reference it when using as arg to
tps6598x_block_write(). Correcting this enforces the constness
of the pointer to propagate to tps6598x_block_write(), so add
the const qualifier there to avoid the warning.
Fixes: 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers") Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The old commit 6e4b74e4690d ("usb: renesas: fix scheduling in atomic
context bug") fixed an atomic issue by using workqueue for the shdmac
dmaengine driver. However, this has a potential race condition issue
between the work pending and usbhsg_ep_free_request() in gadget mode.
When usbhsg_ep_free_request() is called while pending the queue,
since the work_struct will be freed and then the work handler is
called, kernel panic happens on process_one_work().
To fix the issue, if we could call cancel_work_sync() at somewhere
before the free request, it could be easy. However,
the usbhsg_ep_free_request() is called on atomic (e.g. f_ncm driver
calls free request via gether_disconnect()).
For now, almost all users are having "USB-DMAC" and the DMAengine
driver can be used on atomic. So, this patch adds a workaround for
a race condition to call the DMAengine APIs without the workqueue.
This means we still have TODO on shdmac environment (SH7724), but
since it doesn't have SMP, the race condition might not happen.
Fixes: ab330cf3888d ("usb: renesas_usbhs: add support for USB-DMAC") Cc: <stable@vger.kernel.org> # v4.1+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a 10000us AHB idle timeout in dwc2_core_reset() and make it
consistent with the other "wait for AHB master IDLE state" ocurrences.
This fixes a problem for me where dwc2 would not want to initialize when
updating to 4.19 on a MIPS Lantiq VRX200 SoC. dwc2 worked fine with
4.14.
Testing on my board shows that it takes 180us until AHB master IDLE
state is signalled. The very old vendor driver for this SoC (ifxhcd)
used a 1 second timeout.
Use the same timeout that is used everywhere when polling for
GRSTCTL_AHBIDLE instead of using a timeout that "works for one board"
(180us in my case) to have consistent behavior across the dwc2 driver.
On spin lock release in rx_submit, gether_disconnect get a chance to
run, it makes port_usb NULL, rx_submit access NULL port USB, hence null
pointer crash.
Fixed by releasing the lock in rx_submit after port_usb is used.
However at this point of time the variable data_len has not been set
to the proper buffer size yet. The consequence is that io_data->use_sg
is always set regardless what buffer size really is, because the condition
(data_len > PAGE_SIZE) is effectively an unsigned comparison between
-EINVAL and PAGE_SIZE which would always result in TRUE.
The syzbot fuzzer found a bug in the p54 USB wireless driver. The
issue involves a race between disconnect and the firmware-loader
callback routine, and it has several aspects.
One big problem is that when the firmware can't be loaded, the
callback routine tries to unbind the driver from the USB _device_ (by
calling device_release_driver) instead of from the USB _interface_ to
which it is actually bound (by calling usb_driver_release_interface).
The race involves access to the private data structure. The driver's
disconnect handler waits for a completion that is signalled by the
firmware-loader callback routine. As soon as the completion is
signalled, you have to assume that the private data structure may have
been deallocated by the disconnect handler -- even if the firmware was
loaded without errors. However, the callback routine does access the
private data several times after that point.
Another problem is that, in order to ensure that the USB device
structure hasn't been freed when the callback routine runs, the driver
takes a reference to it. This isn't good enough any more, because now
that the callback routine calls usb_driver_release_interface, it has
to ensure that the interface structure hasn't been freed.
Finally, the driver takes an unnecessary reference to the USB device
structure in the probe function and drops the reference in the
disconnect handler. This extra reference doesn't accomplish anything,
because the USB core already guarantees that a device structure won't
be deallocated while a driver is still bound to any of its interfaces.
To fix these problems, this patch makes the following changes:
Call usb_driver_release_interface() rather than
device_release_driver().
Don't signal the completion until after the important
information has been copied out of the private data structure,
and don't refer to the private data at all thereafter.
Lock udev (the interface's parent) before unbinding the driver
instead of locking udev->parent.
During the firmware loading process, take a reference to the
USB interface instead of the USB device.
Don't take an unnecessary reference to the device during probe
(and then don't drop it during disconnect).
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: syzbot+200d4bb11b23d929335f@syzkaller.appspotmail.com CC: <stable@vger.kernel.org> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reading LSR unconditionally but processing the error flags only if
UART_IIR_RDI bit was set before in IIR may lead to a loss of transmission
error information on UARTs where the transmission error flags are cleared
by a read of LSR. Information are lost in case an error is detected right
before the read of LSR while processing e.g. an UART_IIR_THRI interrupt.
Signed-off-by: Oliver Barta <o.barta89@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: 2e9fe5391083 ("serial: 8250: Don't service RX FIFO if interrupts are disabled") Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Per the 802.11 specification, vendor IEs are (at minimum) only required
to contain an OUI. A type field is also included in ieee80211.h (struct
ieee80211_vendor_ie) but doesn't appear in the specification. The
remaining fields (subtype, version) are a convention used in WMM
headers.
Thus, we should not reject vendor-specific IEs that have only the
minimum length (3 bytes) -- we should skip over them (since we only want
to match longer IEs, that match either WMM or WPA formats). We can
reject elements that don't have the minimum-required 3 byte OUI.
While we're at it, move the non-standard subtype and version fields into
the WMM structs, to avoid this confusion in the future about generic
"vendor header" attributes.
Fixes: 685c9b7750bf ("mwifiex: Abort at too short BSS descriptor element") Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently mwifiex_update_bss_desc_with_ie() implicitly assumes that
the source descriptor entries contain the enough size for each type
and performs copying without checking the source size. This may lead
to read over boundary.
Fix this by putting the source size check in appropriate places.
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The index to access the threads tls array is controlled by userspace
via syscall: sys_ptrace(), hence leading to a potential exploitation
of the Spectre variant 1 vulnerability.
The index can be controlled from:
ptrace -> arch_ptrace -> do_get_thread_area.
Fix this by sanitizing the user supplied index before using it to access
the p->thread.tls_array.
The index to access the threads ptrace_bps is controlled by userspace via
syscall: sys_ptrace(), hence leading to a potential exploitation of the
Spectre variant 1 vulnerability.
The index can be controlled from:
ptrace -> arch_ptrace -> ptrace_get_debugreg.
Fix this by sanitizing the user supplied index before using it access
thread->ptrace_bps.
With this missing, pipe-mode (perf record -o -) would crash like:
Program terminated with signal SIGSEGV, Segmentation fault.
This patch assign proper ph value to ff.
Committer testing:
(gdb) run record -o -
Starting program: /root/bin/perf record -o -
PERFILE2
<SNIP start of perf.data headers>
Thread 1 "perf" received signal SIGSEGV, Segmentation fault.
__do_write_buf (size=4, buf=0x160, ff=0x7fffffff8f80) at util/header.c:126
126 memcpy(ff->buf + ff->offset, buf, size);
(gdb) bt
#0 __do_write_buf (size=4, buf=0x160, ff=0x7fffffff8f80) at util/header.c:126
#1 do_write (ff=ff@entry=0x7fffffff8f80, buf=buf@entry=0x160, size=4) at util/header.c:137
#2 0x00000000004eddba in write_bpf_prog_info (ff=0x7fffffff8f80, evlist=<optimized out>) at util/header.c:912
#3 0x00000000004f69d7 in perf_event__synthesize_features (tool=tool@entry=0x97cc00 <record>, session=session@entry=0x7fffe9c6d010,
evlist=0x7fffe9cae010, process=process@entry=0x4435d0 <process_synthesized_event>) at util/header.c:3695
#4 0x0000000000443c79 in record__synthesize (tail=tail@entry=false, rec=0x97cc00 <record>) at builtin-record.c:1214
#5 0x0000000000444ec9 in __cmd_record (rec=0x97cc00 <record>, argv=<optimized out>, argc=0) at builtin-record.c:1435
#6 cmd_record (argc=0, argv=<optimized out>) at builtin-record.c:2450
#7 0x00000000004ae3e9 in run_builtin (p=p@entry=0x98e058 <commands+216>, argc=argc@entry=3, argv=0x7fffffffd670) at perf.c:304
#8 0x000000000042eded in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:356
#9 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:400
#10 main (argc=3, argv=<optimized out>) at perf.c:522
(gdb)
After the patch the SEGSEGV is gone.
Reported-by: David Carrillo Cisneros <davidca@fb.com> Signed-off-by: Song Liu <songliubraving@fb.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kernel-team@fb.com Cc: stable@vger.kernel.org # v5.1+ Fixes: 606f972b1361 ("perf bpf: Save bpf_prog_info information as headers to perf.data") Link: http://lkml.kernel.org/r/20190620010453.4118689-1-songliubraving@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit f08046cb3082 ("perf thread-stack: Represent jmps to the start of a
different symbol") had the side-effect of introducing more stack entries
before return from kernel space.
When user space is also traced, those entries are popped before entry to
user space, but when user space is not traced, they get stuck at the
bottom of the stack, making the stack grow progressively larger.
Fix by detecting a return-from-kernel branch type, and popping kernel
addresses from the stack then.
Note, the problem and fix affect the exported Call Graph / Tree but not
the callindent option used by "perf script --call-trace".
Example:
perf-with-kcore record example -e intel_pt//k -- ls
perf-with-kcore script example --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py example.db branches calls
~/libexec/perf-core/scripts/python/exported-sql-viewer.py example.db
Menu option: Reports -> Context-Sensitive Call Graph
The first arg to the perf-with-kcore needs to be the same for the
'record' and 'script' lines, otherwise we'll record the perf.data file
and kcore_dir/ files in one directory ('example') to then try to use it
from the 'bep' directory, fix the instructions above it so that both use
'example'.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Fixes: f08046cb3082 ("perf thread-stack: Represent jmps to the start of a different symbol") Link: http://lkml.kernel.org/r/20190619064429.14940-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 4eb068157121 ("perf script: Make itrace script default to all
calls") does not work for the case when '--itrace' only is used, because
default_no_sample is not being passed.
Example:
Before:
$ perf record -e intel_pt/cyc/u ls
$ perf script --itrace > cmp1.txt
$ perf script --itrace=cepwx > cmp2.txt
$ diff -sq cmp1.txt cmp2.txt
Files cmp1.txt and cmp2.txt differ
Commit 4eb068157121 ("perf script: Make itrace script default to all
calls") does not work because 'use_browser' is being used to determine
whether to default to periodic sampling (i.e. better for perf report).
The result is that nothing but CBR events display for perf script when
no --itrace option is specified.
Fix by using 'default_no_sample' and 'inject' instead.
Example:
Before:
$ perf record -e intel_pt/cyc/u ls
$ perf script > cmp1.txt
$ perf script --itrace=cepwx > cmp2.txt
$ diff -sq cmp1.txt cmp2.txt
Files cmp1.txt and cmp2.txt differ
In reboot tests on several devices we were seeing a "use after free"
when slub_debug or KASAN was enabled. The kernel complained about:
Unable to handle kernel paging request at virtual address 6b6b6c2b
...which is a classic sign of use after free under slub_debug. The
stack crawl in kgdb looked like:
0 test_bit (addr=<optimized out>, nr=<optimized out>)
1 bfq_bfqq_busy (bfqq=<optimized out>)
2 bfq_select_queue (bfqd=<optimized out>)
3 __bfq_dispatch_request (hctx=<optimized out>)
4 bfq_dispatch_request (hctx=<optimized out>)
5 0xc056ef00 in blk_mq_do_dispatch_sched (hctx=0xed249440)
6 0xc056f728 in blk_mq_sched_dispatch_requests (hctx=0xed249440)
7 0xc0568d24 in __blk_mq_run_hw_queue (hctx=0xed249440)
8 0xc0568d94 in blk_mq_run_work_fn (work=<optimized out>)
9 0xc024c5c4 in process_one_work (worker=0xec6d4640, work=0xed249480)
10 0xc024cff4 in worker_thread (__worker=0xec6d4640)
Digging in kgdb, it could be found that, though bfqq looked fine,
bfqq->bic had been freed.
Through further digging, I postulated that perhaps it is illegal to
access a "bic" (AKA an "icq") after bfq_exit_icq() had been called
because the "bic" can be freed at some point in time after this call
is made. I confirmed that there certainly were cases where the exact
crashing code path would access the "bic" after bfq_exit_icq() had
been called. Sspecifically I set the "bfqq->bic" to (void *)0x7 and
saw that the bic was 0x7 at the time of the crash.
To understand a bit more about why this crash was fairly uncommon (I
saw it only once in a few hundred reboots), you can see that much of
the time bfq_exit_icq_fbqq() fully frees the bfqq and thus it can't
access the ->bic anymore. The only case it doesn't is if
bfq_put_queue() sees a reference still held.
However, even in the case when bfqq isn't freed, the crash is still
rare. Why? I tracked what happened to the "bic" after the exit
routine. It doesn't get freed right away. Rather,
put_io_context_active() eventually called put_io_context() which
queued up freeing on a workqueue. The freeing then actually happened
later than that through call_rcu(). Despite all these delays, some
extra debugging showed that all the hoops could be jumped through in
time and the memory could be freed causing the original crash. Phew!
To make a long story short, assuming it truly is illegal to access an
icq after the "exit_icq" callback is finished, this patch is needed.
Cc: stable@vger.kernel.org Reviewed-by: Paolo Valente <paolo.valente@unimore.it> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A "get random" may fail with a TPM error, but those codes were returned
as-is to the caller, which assumed the result was the number of bytes
that had been written to the target buffer, which could lead to a kernel
heap memory exposure and over-read.
This fixes tpm1_get_random() to mask positive TPM errors into -EIO, as
before.
[ 18.092103] tpm tpm0: A TPM error (379) occurred attempting get random
[ 18.092106] usercopy: Kernel memory exposure attempt detected from SLUB object 'kmalloc-64' (offset 0, size 379)!
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1650989 Reported-by: Phil Baker <baker1tex@gmail.com> Reported-by: Craig Robson <craig@zhatt.com> Fixes: 7aee9c52d7ac ("tpm: tpm1: rewrite tpm1_get_random() using tpm_buf structure") Cc: Laura Abbott <labbott@redhat.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Bartosz Szczepanek <bsz@semihalf.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dell headset mode platform with ALC236.
It doesn't recording after system resume from S3.
S3 mode was deep. s2idle was not has this issue.
S3 deep will cut of codec power. So, the register will back to default
after resume back.
This patch will solve this issue.
Extension Unit (XU) is used to have a compatible layout with
Processing Unit (PU) on UAC1, and the usb-audio driver code assumed it
for parsing the descriptors. Meanwhile, on UAC2, XU became slightly
incompatible with PU; namely, XU has a one-byte bmControls bitmap
while PU has two bytes bmControls bitmap. This incompatibility
results in the read of a wrong address for the last iExtension field,
which ended up with an incorrect string for the mixer element name, as
recently reported for Focusrite Scarlett 18i20 device.
This patch corrects this misalignment by introducing a couple of new
macros and calling them depending on the descriptor type.
Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0") Reported-by: Stefan Sauer <ensonic@hora-obscura.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some cases, using the 'truncate' command to extend a UDF file results
in a mismatch between the length of the file's extents (specifically, due
to incorrect length of the final NOT_ALLOCATED extent) and the information
(file) length. The discrepancy can prevent other operating systems
(i.e., Windows 10) from opening the file.
Two particular errors have been observed when extending a file:
1. The final extent is larger than it should be, having been rounded up
to a multiple of the block size.
B. The final extent is not shorter than it should be, due to not having
been updated when the file's information length was increased.
[JK: simplified udf_do_extend_final_block(), fixed up some types]
Fixes: 2c948b3f86e5 ("udf: Avoid IO in udf_clear_inode") CC: stable@vger.kernel.org Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Link: https://lore.kernel.org/r/1561948775-5878-1-git-send-email-steve@digidescorp.com Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The directory may have been removed when entering
fscrypt_ioctl_set_policy(). If so, the empty_dir() check will return
error for ext4 file system.
ext4_rmdir() sets i_size = 0, then ext4_empty_dir() reports an error
because 'inode->i_size < EXT4_DIR_REC_LEN(1) + EXT4_DIR_REC_LEN(2)'. If
the fs is mounted with errors=panic, it will trigger a panic issue.
Add the check IS_DEADDIR() to fix this problem.
Fixes: 9bd8212f981e ("ext4 crypto: add encryption policy and password salt support") Cc: <stable@vger.kernel.org> # v4.1+ Signed-off-by: Hongjie Fang <hongjiefang@asrmicro.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We can end up in nfs4_opendata_alloc during task exit, in which case
current->fs has already been cleaned up. This leads to a crash in
current_umask().
Fix this by only setting creation opendata if we are actually doing an open
with O_CREAT. We can drop the check for NULL nfs4_open_createattrs, since
O_CREAT will never be set for the recovery path.
Suggested-by: Trond Myklebust <trondmy@hammerspace.com> Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The emulated ptimer needs to track the level changes, otherwise the
the interrupt will never get deasserted, resulting in the guest getting
stuck in an interrupt storm if it enables ptimer interrupts. This was
found with kvm-unit-tests; the ptimer tests hung as soon as interrupts
were enabled. Typical Linux guests don't have a problem as they prefer
using the virtual timer.
Fixes: bee038a674875 ("KVM: arm/arm64: Rework the timer code to use a timer_map") Signed-off-by: Andrew Jones <drjones@redhat.com>
[Simplified the patch to res we only care about emulated timers here] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Run below script as root, dquot_add_space will return -EDQUOT since
__dquot_transfer call dquot_add_space with flags=0, and dquot_add_space
think it's a preallocation. Fix it by set flags as DQUOT_SPACE_WARN.
With the strict dma mask checking introduced with the switch to
the generic DMA direct code common wifi chips on 32-bit powerbooks
stopped working. Add a 30-bit ZONE_DMA to the 32-bit pmac builds
to allow them to reliably allocate dma coherent memory.
Fixes: 65a21b71f948 ("powerpc/dma: remove dma_nommu_dma_supported") Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Left shifting the signed int value 1 by 31 bits has undefined behaviour
and the shift amount oq_no can be as much as 63. Fix this by using
BIT_ULL(oq_no) instead.
Addresses-Coverity: ("Bad shift operation") Fixes: f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The copy_from_user() function returns the number of bytes remaining
to be copied but we want to return a negative error code. Otherwise
the callers treat it as a successful copy.
Some transceivers may comply with SFF-8472 even though they do not
implement the Digital Diagnostic Monitoring (DDM) interface described in
the spec. The existence of such area is specified by the 6th bit of byte
92, set to 1 if implemented.
Currently, without checking this bit, bnx2x fails trying to read sfp
module's EEPROM with the follow message:
ethtool -m enP5p1s0f1
Cannot get Module EEPROM data: Input/output error
Because it fails to read the additional 256 bytes in which it is assumed
to exist the DDM data.
This issue was noticed using a Mellanox Passive DAC PN 01FT738. The EEPROM
data was confirmed by Mellanox as correct and similar to other Passive
DACs from other manufacturers.
Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com> Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Stopping external metadata arrays during resync/recovery causes
retries, loop of interrupting and starting reconstruction, until it
hit at good moment to stop completely. While these retries
curr_mark_cnt can be small- especially on HDD drives, so subtraction
result can be smaller than 0. However it is casted to uint without
checking. As a result of it the status bar in /proc/mdstat while stopping
is strange (it jumps between 0% and 99%).
The real problem occurs here after commit 72deb455b5ec ("block: remove
CONFIG_LBDAF"). Sector_div() macro has been changed, now the
divisor is casted to uint32. For db = -8 the divisior(db/32-1) becomes 0.
Check if db value can be really counted and replace these macro by
div64_u64() inline.
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The call to sc_buffer_alloc currently returns NULL (no buffer) or
a buffer descriptor.
There is a third case when the port is down. Currently that
returns NULL and this prevents the caller from properly handling the
sc_buffer_alloc() failure. A verbs code link test after the call is
racy so the indication needs to come from the state check inside the allocation
routine to be valid.
Fix by encoding the ECOMM failure like SDMA. IS_ERR_OR_NULL() tests
are added at all call sites. For verbs send, this needs to treat any
error by returning a completion without any MMIO copy.
Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Once an SDMA engine is taken down due to a link failure, any waiting QPs
that do not have outstanding descriptors in the ring will stay
on the dmawait list as long as the port is down.
Since there is no timer running, they will stay there for a long time.
The fix is to wake up all iowaits linked to dmawait. The send engine
will build and post packets that get flushed back.
Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We don't have a reproducible error case, yet our BSP team suggested that
the mmc_switch_status() command in mmc_select_hs400() should come after
the callback into the driver completing HS400 setup. It makes sense to
me because we want the status of a fully setup HS400, so it will
increase the reliability of the mmc_switch_status() command.
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Fixes: ba6c7ac3a2f4 ("mmc: core: more fine-grained hooks for HS400 tuning") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Switch qmimux_unregister_device() and qmi_wwan_disconnect() to
use unregister_netdevice_queue() and unregister_netdevice_many()
instead of unregister_netdevice(). This avoids RCU stalls which
have been observed on device disconnect in certain setups otherwise.
Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The QMAP code in the qmi_wwan driver is based on the CodeAurora GobiNet
driver which does not process QMAP padding in the RX path correctly.
Add support for QMAP padding to qmimux_rx_fixup() according to the
description of the rmnet driver.
Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since commit 177366bf7ceb the %rbp stopped pointing to %rbp of the
previous stack frame. That broke frame pointer based stack unwinding.
This commit is a partial revert of it.
Note that the location of tail_call_cnt is fixed, since the verifier
enforces MAX_BPF_STACK stack size for programs with tail calls.
Fixes: 177366bf7ceb ("bpf: change x86 JITed program stack layout") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
.ndo_xdp_xmit() assumes it is called under RCU. For example virtio_net
uses RCU to detect it has setup the resources for tx. The assumption
accidentally broke when introducing bulk queue in devmap.
Fixes: 5d053f9da431 ("bpf: devmap prepare xdp frames for bulking") Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Toshiaki Makita <toshiaki.makita1@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
dev_map_free() waits for flush_needed bitmap to be empty in order to
ensure all flush operations have completed before freeing its entries.
However the corresponding clear_bit() was called before using the
entries, so the entries could be used after free.
All access to the entries needs to be done before clearing the bit.
It seems commit a5e2da6e9787 ("bpf: netdev is never null in
__dev_map_flush") accidentally changed the clear_bit() and memory access
order.
Note that the problem happens only in __dev_map_flush(), not in
dev_map_flush_old(). dev_map_flush_old() is called only after nulling
out the corresponding netdev_map entry, so dev_map_free() never frees
the entry thus no such race happens there.
Fixes: a5e2da6e9787 ("bpf: netdev is never null in __dev_map_flush") Signed-off-by: Toshiaki Makita <toshiaki.makita1@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The bits of Rx MCS Map in VHT capability were enumerated
with index transform - index i -> (i + 1) bit => nss i. BUG!
while it should be - index i -> (i + 1) bit => (i + 1) nss.
The bug was exposed in commit a53b2a0b1245 ("iwlwifi: mvm: implement VHT
extended NSS support in rs.c"), where iwlwifi started using the
function.
In multiple SSID cases, it takes time to prepare every AP interface
to be ready in initializing phase. If a sta already knows everything it
needs to join one of the APs and sends authentication to the AP which
is not fully prepared at this point of time, AP's channel context
could be NULL. As a result, warning message occurs.
Even worse, if the AP is under attack via tools such as MDK3 and massive
authentication requests are received in a very short time, console will
be hung due to kernel warning messages.
WARN_ON_ONCE() could be a better way for indicating warning messages
without duplicate messages to flood the console.
Johannes: We still need to address the underlying problem, but we
don't really have a good handle on it yet. Suppress the
worst side-effects for now.
The output of the IC downsizer unit in both dimensions must be <= 1024
before being passed to the IC resizer unit. This was causing corrupted
images when:
The input bytesperline calculation for packed pixel formats was
incorrect. The min/max clamping values must be multiplied by the
packed bits-per-pixel. This was causing corrupted converted images
when the input format was RGB4 (probably also other input packed
formats).
The output width and height alignment values were being used in the
input bytesperline calculation. Fix by separating local vars w_align
and h_align into w_align_in, h_align_in, w_align_out, and h_align_out.
If the result of the division is LLONG_MIN, current tests do not detect
the error since the return value is truncated to a 32-bit value and ends
up being 0.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Unfortunately, a couple of mistakes were made while implementing
Enlightened VMCS support, in particular, wrong clean fields were
used in copy_enlightened_to_vmcs12():
- exception_bitmap is covered by CONTROL_EXCPN;
- vm_exit_controls/pin_based_vm_exec_control/secondary_vm_exec_control
are covered by CONTROL_GRP1.
kvm_device->destroy() seems to be supposed to free its kvm_device
struct, but vgic_its_destroy() is not currently doing this,
resulting in a memory leak, resulting in kmemleak reports such as
the following:
Cc: Andre Przywara <andre.przywara@arm.com> Fixes: 1085fdc68c60 ("KVM: arm64: vgic-its: Introduce new KVM ITS device") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We should not call 'ndo_bpf()' or 'dev_put()' with NULL argument.
Fixes: c9b47cc1fabc ("xsk: fix bug when trying to use both copy and zero-copy on one queue id") Signed-off-by: Ilya Maximets <i.maximets@samsung.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
There are several scenarios that keyboard can NOT wake up system
from suspend, e.g., if a keyboard is depressed between system
device suspend phase and device noirq suspend phase, the keyboard
ISR will be called and both keyboard depress and release interrupts
will be disabled, then keyboard will no longer be able to wake up
system. Another scenario would be, if a keyboard is kept depressed,
and then system goes into suspend, the expected behavior would be
when keyboard is released, system will be waked up, but current
implementation can NOT achieve that, because both depress and release
interrupts are disabled in ISR, and the event check is still in
progress.
To fix these issues, need to make sure keyboard's depress or release
interrupt is enabled after noirq device suspend phase, this patch
moves the suspend/resume callback to noirq suspend/resume phase, and
enable the corresponding interrupt according to current keyboard status.
In RV32, udelay would delay the wrong cycle. When it shifts right
"UDELAY_SHIFT" bits, it either delays 0 cycle or 1 cycle. It only works
correctly in RV64. Because the 'ucycles' always needs to be 64 bits
variable.
Signed-off-by: Nick Hu <nickhu@andestech.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
[paul.walmsley@sifive.com: fixed minor spelling error] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Booting up with DMA_API_DEBUG_SG=y generates a warning due to the driver
forgot to set dma_parms appropriately. Set it just after vmw_dma_masks()
in vmw_driver_load().
arch/s390/boot/ipl_report.c: In function 'find_bootdata_space':
arch/s390/boot/ipl_report.c:42:26: warning: taking address of packed member of 'struct ipl_rb_components' may result in an unaligned pointer value [-Waddress-of-packed-member]
42 | for_each_rb_entry(comp, comps)
| ^~~~~
This is effectively the s390 variant of commit 20c6c1890455
("x86/boot: Disable the address-of-packed-member compiler warning").
The return values for these memory allocations are unchecked,
which may cause an oops if the driver does not handle them after
a failure. Fix by checking the function's return code.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
It was observed that multicast packets were no longer received after
a device reset. The fix is to resend the current multicast list to
the backing device after recovery.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Check driver state before halting it during a reset. If the driver is
not running, do nothing. Otherwise, a request to deactivate a down link
can cause an error and the reset will fail.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>