Jens Axboe [Mon, 27 Jun 2022 00:21:03 +0000 (18:21 -0600)]
io_uring: use separate list entry for iopoll requests
A previous commit ended up enabling file tracking for iopoll requests,
which conflicts with both of them using the same list entry for tracking.
Add a separate list entry just for iopoll requests, avoid this issue.
Jens Axboe [Wed, 22 Jun 2022 20:05:49 +0000 (14:05 -0600)]
io_uring: add missing item types for various requests
Any read/write should grab current->nsproxy, denoted by IO_WQ_WORK_FILES
as it refers to current->files as well, and connect and recv/recvmsg,
send/sendmsg should grab current->fs which is denoted by IO_WQ_WORK_FS.
Invalidating the buffer memory in arch_sync_dma_for_device() for
FROM_DEVICE transfers
When using the streaming DMA API to map a buffer prior to inbound
non-coherent DMA (i.e. DMA_FROM_DEVICE), we invalidate any dirty CPU
cachelines so that they will not be written back during the transfer and
corrupt the buffer contents written by the DMA. This, however, poses two
potential problems:
(1) If the DMA transfer does not write to every byte in the buffer,
then the unwritten bytes will contain stale data once the transfer
has completed.
(2) If the buffer has a virtual alias in userspace, then stale data
may be visible via this alias during the period between performing
the cache invalidation and the DMA writes landing in memory.
Address both of these issues by cleaning (aka writing-back) the dirty
lines in arch_sync_dma_for_device(DMA_FROM_DEVICE) instead of discarding
them using invalidation.
Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220606152150.GA31568@willie-the-truck Signed-off-by: Will Deacon <will@kernel.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20220610151228.4562-2-will@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RTS polarity of rs485-enabled ports is currently initialized on uart
open via:
tty_port_open()
tty_port_block_til_ready()
tty_port_raise_dtr_rts() # if (C_BAUD(tty))
uart_dtr_rts()
uart_port_dtr_rts()
There's at least three problems here:
First, if no baud rate is set, RTS polarity is not initialized.
That's the right thing to do for rs232, but not for rs485, which
requires that RTS is deasserted unconditionally.
Second, if the DeviceTree property "linux,rs485-enabled-at-boot-time" is
present, RTS should be deasserted as early as possible, i.e. on probe.
Otherwise it may remain asserted until first open.
Third, even though RTS is deasserted on open and close, it may
subsequently be asserted by uart_throttle(), uart_unthrottle() or
uart_set_termios() because those functions aren't rs485-aware.
(Only uart_tiocmset() is.)
To address these issues, move RTS initialization from uart_port_dtr_rts()
to uart_configure_port(). Prevent subsequent modification of RTS
polarity by moving the existing rs485 check from uart_tiocmget() to
uart_update_mctrl().
That way, RTS is initialized on probe and then remains unmodified unless
the uart transmits data. If rs485 is enabled at runtime (instead of at
boot) through a TIOCSRS485 ioctl(), RTS is initialized by the uart
driver's ->rs485_config() callback and then likewise remains unmodified.
The PL011 driver initializes RTS on uart open and prevents subsequent
modification in its ->set_mctrl() callback. That code is obsoleted by
the present commit, so drop it.
In commit 190cc82489f4 ("tcp: change source port randomizarion at
connect() time"), the table_perturb[] array was introduced and an
index was taken from the port_offset via hash_32(). But it turns
out that hash_32() performs a multiplication while the input here
comes from the output of SipHash in secure_seq, that is well
distributed enough to avoid the need for yet another hash.
Suggested-by: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moshe Kol, Amit Klein, and Yossi Gilad reported being able to accurately
identify a client by forcing it to emit only 40 times more connections
than there are entries in the table_perturb[] table. The previous two
improvements consisting in resalting the secret every 10s and adding
randomness to each port selection only slightly improved the situation,
and the current value of 2^8 was too small as it's not very difficult
to make a client emit 10k connections in less than 10 seconds.
Thus we're increasing the perturb table from 2^8 to 2^16 so that the
same precision now requires 2.6M connections, which is more difficult in
this time frame and harder to hide as a background activity. The impact
is that the table now uses 256 kB instead of 1 kB, which could mostly
affect devices making frequent outgoing connections. However such
components usually target a small set of destinations (load balancers,
database clients, perf assessment tools), and in practice only a few
entries will be visited, like before.
A live test at 1 million connections per second showed no performance
difference from the previous value.
Reported-by: Moshe Kol <moshe.kol@mail.huji.ac.il> Reported-by: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Reported-by: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We'll need to further increase the size of this table and it's likely
that at some point its size will not be suitable anymore for a static
table. Let's allocate it on boot from inet_hashinfo2_init(), which is
called from tcp_init().
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here we're randomly adding between 0 and 7 random increments to the
selected source port in order to add some noise in the source port
selection that will make the next port less predictable.
With the default port range of 32768-60999 this means a worst case
reuse scenario of 14116/8=1764 connections between two consecutive
uses of the same port, with an average of 14116/4.5=3137. This code
was stressed at more than 800000 connections per second to a fixed
target with all connections closed by the client using RSTs (worst
condition) and only 2 connections failed among 13 billion, despite
the hash being reseeded every 10 seconds, indicating a perfectly
safe situation.
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amit Klein suggests that we use different parts of port_offset for the
table's index and the port offset so that there is no direct relation
between them.
Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Even when implementing RFC 6056 3.3.4 (Algorithm 4: Double-Hash
Port Selection Algorithm), a patient attacker could still be able
to collect enough state from an otherwise idle host.
Idea of this patch is to inject some noise, in the
cases __inet_hash_connect() found a candidate in the first
attempt.
This noise should not significantly reduce the collision
avoidance, and should be zero if connection table
is already well used.
Note that this is not implementing RFC 6056 3.3.5
because we think Algorithm 5 could hurt typical
workloads.
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Dworken <ddworken@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In systemd systems setting a fixed MAC address through
the "dev_addr" module argument fails systematically.
When checking the MAC address after the interface is created
it always has the same but different MAC address to the one
supplied as argument.
This is partially caused by systemd which by default will
set an internally generated permanent MAC address for interfaces
that are marked as having a randomly generated address.
Commit 890d5b40908bfd1a ("usb: gadget: u_ether: fix race in
setting MAC address in setup phase") didn't take into account
the fact that the interface must be marked as having a set
MAC address when it's set as module argument.
Fixed by marking the interface with NET_ADDR_SET when
the "dev_addr" module argument is supplied.
Fixes: 890d5b40908bfd1a ("usb: gadget: u_ether: fix race in setting MAC address in setup phase") Cc: stable@vger.kernel.org Signed-off-by: Marian Postevca <posteuca@mutex.one> Link: https://lore.kernel.org/r/20220603153459.32722-1-posteuca@mutex.one Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a readahead is issued to a sequential zone file with an offset
exactly equal to the current file size, the iomap type is set to
IOMAP_UNWRITTEN, which will prevent an IO, but the iomap length is
calculated as 0. This causes a WARN_ON() in iomap_iter():
Furthermore, this causes iomap_readahead() to loop forever as
iomap_readahead_iter() always returns 0, making no progress.
Fix this by treating reads after the file size as access to holes,
setting the iomap type to IOMAP_HOLE, the iomap addr to IOMAP_NULL_ADDR
and using the length argument as is for the iomap length. To simplify
the code with this change, zonefs_iomap_begin() is split into the read
variant, zonefs_read_iomap_begin() and zonefs_read_iomap_ops, and the
write variant, zonefs_write_iomap_begin() and zonefs_write_iomap_ops.
Reported-by: Jorgen Hansen <Jorgen.Hansen@wdc.com> Fixes: 8dcc1a9d90c1 ("fs: New zonefs file system") Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Jorgen Hansen <Jorgen.Hansen@wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The switch to a keyed guest does not require a classic sske as the other
guest CPUs are not accessing the key before the switch is complete.
By using the NQ SSKE things are faster especially with multiple guests.
According to reference mannual CCGR77(usb) sources from hsio_axi, fix
it.
Fixes: 9c140d9926761 ("clk: imx: Add support for i.MX8MP clock driver") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220507125430.793287-1-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
You cannot include <generated/compile.h> here because it is generated
in init/Makefile but there is no guarantee that it happens before
arch/powerpc/mm/nohash/kaslr_booke.c is compiled for parallel builds.
The places where you can reliably include <generated/compile.h> are:
- init/ (because init/Makefile can specify the dependency)
- arch/*/boot/ (because it is compiled after vmlinux)
Commit f231e4333312 ("hexagon: get rid of #include <generated/compile.h>")
fixed the last breakage at that time, but powerpc re-added this.
<generated/compile.h> was unneeded because 'build_str' is almost the
same as 'linux_banner' defined in init/version.c
Let's copy the solution from MIPS.
(get_random_boot() in arch/mips/kernel/relocate.c)
Fixes: 6a38ea1d7b94 ("powerpc/fsl_booke/32: randomize the kernel image offset") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220604085050.4078927-1-masahiroy@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enables PCIe PTM (Precision Time Measurement) support in the igc
driver. Notifies the PCI devices that PCIe PTM should be enabled.
PCIe PTM is similar protocol to PTP (Precision Time Protocol) running
in the PCIe fabric, it allows devices to report time measurements from
their internal clocks and the correlation with the PCIe root clock.
The i225 NIC exposes some registers that expose those time
measurements, those registers will be used, in later patches, to
implement the PTP_SYS_OFFSET_PRECISE ioctl().
After the first ct() action the packet headers are almost fully
re-written. The next ct() tries to re-use the existing nfct entry
and marks the packet as invalid, so it gets dropped later in the
pipeline.
Clearing the cached conntrack entry whenever packet tuple is changed
to avoid the issue.
The flow key should not be cleared though, because we should still
be able to match on the ct_state if the recirculation happens after
the tuple change but before the next ct() action.
in current Linux, MTU policing does not take into account that packets at
the TC ingress have the L2 header pulled. Thus, the same TC police action
(with the same value of tcfp_mtu) behaves differently for ingress/egress.
In addition, the full GSO size is compared to tcfp_mtu: as a consequence,
the policer drops GSO packets even when individual segments have the L2 +
L3 + L4 + payload length below the configured valued of tcfp_mtu.
Improve the accuracy of MTU policing as follows:
- account for mac_len for non-GSO packets at TC ingress.
- compare MTU threshold with the segmented size for GSO packets.
Also, add a kselftest that verifies the correct behavior.
Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[dcaratti: fix conflicts due to lack of the following commits:
- commit 2ffe0395288a ("net/sched: act_police: add support for
packet-per-second policing")
- commit 53b61f29367d ("selftests: forwarding: Add tc-police tests for
packets per second")] Link: https://lore.kernel.org/netdev/876d597a0ff55f6ba786f73c5a9fd9eb8d597a03.1644514748.git.dcaratti@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The original x86 sev_alloc() only called set_memory_decrypted() on
memory returned by alloc_pages_node(), so the page order calculation
fell out of that logic. However, the common dma-direct code has several
potential allocators, not all of which are guaranteed to round up the
underlying allocation to a power-of-two size, so carrying over that
calculation for the encryption/decryption size was a mistake. Fix it by
rounding to a *number* of pages, rather than an order.
Until recently there was an even worse interaction with DMA_DIRECT_REMAP
where we could have ended up decrypting part of the next adjacent
vmalloc area, only averted by no architecture actually supporting both
configs at once. Don't ask how I found that one out...
Fixes: c10f07aa27da ("dma/direct: Handle force decryption for DMA coherent buffers in common code") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: David Rientjes <rientjes@google.com>
[ backport the functional change without all the prior refactoring ] Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GCC 12 enhanced -Waddress when comparing array address to null [0],
which warns:
drivers/virtio/virtio_pci_common.c: In function ‘vp_del_vqs’:
drivers/virtio/virtio_pci_common.c:257:29: warning: the comparison will always evaluate as ‘true’ for the pointer operand in ‘vp_dev->msix_affinity_masks + (sizetype)((long unsigned int)i * 256)’ must not be NULL [-Waddress]
257 | if (vp_dev->msix_affinity_masks[i])
| ^~~~~~
In fact, the verification is comparing the result of a pointer
arithmetic, the address "msix_affinity_masks + i", which will always
evaluate to true.
Under the hood, free_cpumask_var() calls kfree(), which is safe to pass
NULL, not requiring non-null verification. So remove the verification
to make compiler happy (happy compiler, happy life).
The HP EliteBook 630 is using ALC236 codec which used 0x02 to control mute LED
and 0x01 to control micmute LED. Therefore, add a quirk to make it works.
For some sev ioctl interfaces, the length parameter that is passed maybe
less than or equal to SEV_FW_BLOB_MAX_SIZE, but larger than the data
that PSP firmware returns. In this case, kmalloc will allocate memory
that is the size of the input rather than the size of the data.
Since PSP firmware doesn't fully overwrite the allocated buffer, these
sev ioctl interface may return uninitialized kernel slab memory.
Reported-by: Andy Nguyen <theflow@google.com> Suggested-by: David Rientjes <rientjes@google.com> Suggested-by: Peter Gonda <pgonda@google.com> Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Cc: linux-kernel@vger.kernel.org Fixes: eaf78265a4ab3 ("KVM: SVM: Move SEV code to separate file") Fixes: 2c07ded06427d ("KVM: SVM: add support for SEV attestation command") Fixes: 4cfdd47d6d95a ("KVM: SVM: Add KVM_SEV SEND_START command") Fixes: d3d1af85e2c75 ("KVM: SVM: Add KVM_SEND_UPDATE_DATA command") Fixes: eba04b20e4861 ("KVM: x86: Account a variety of miscellaneous allocations") Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Reviewed-by: Peter Gonda <pgonda@google.com>
Message-Id: <20220516154310.3685678-1-Ashish.Kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[sudip: adjust context] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since 5bfa685e62e9 ("KVM: arm64: vgic: Read HW interrupt pending state
from the HW"), we're able to source the pending bit for an interrupt
that is stored either on the physical distributor or on a device.
However, this state is only available when the vcpu is loaded,
and is not intended to be accessed from userspace. Unfortunately,
the GICv2 emulation doesn't provide specific userspace accessors,
and we fallback with the ones that are intended for the guest,
with fatal consequences.
Add a new vgic_uaccess_read_pending() accessor for userspace
to use, build on top of the existing vgic_mmio_read_pending().
Reported-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Fixes: 5bfa685e62e9 ("KVM: arm64: vgic: Read HW interrupt pending state from the HW") Link: https://lore.kernel.org/r/20220607131427.1164881-2-maz@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We capture a NULL pointer issue when resizing a corrupt ext4 image which
is freshly clear resize_inode feature (not run e2fsck). It could be
simply reproduced by following steps. The problem is because of the
resize_inode feature was cleared, and it will convert the filesystem to
meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was
not reduced to zero, so could we mistakenly call reserve_backup_gdb()
and passing an uninitialized resize_inode to it when adding new group
descriptors.
mkfs.ext4 /dev/sda 3G
tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck
mount /dev/sda /mnt
resize2fs /dev/sda 8G
The fix is simple, add a check in ext4_resize_begin() to make sure that
the es->s_reserved_gdt_blocks is zero when the resize_inode feature is
disabled.
Cc: stable@kernel.org Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220601092717.763694-1-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since dx_make_map() may return -EFSCORRUPTED now, so change "count" to
be a signed integer so we can correctly check for an error code returned
by dx_make_map().
we can easily reproduce this problem with the following commands:
`fallocate -l100M disk`
`mkfs.ext4 -b 1024 -g 256 disk`
`mount disk /mnt`
`fsstress -d /mnt -l 0 -n 1000 -p 1`
The size must be smaller than or equal to EXT4_BLOCKS_PER_GROUP.
Therefore, "start + size <= ac->ac_o_ex.fe_logical" may occur
when the size is truncated. So start should be the start position of
the group where ac_o_ex.fe_logical is located after alignment.
In addition, when the value of fe_logical or EXT4_BLOCKS_PER_GROUP
is very large, the value calculated by start_off is more accurate.
Cc: stable@kernel.org Fixes: cd648b8a8fd5 ("ext4: trim allocation requests to group size") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/20220528110017.354175-2-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Why]
For OLED eDP the Display Manager uses max_cll value as a limit
for brightness control.
max_cll defines the content light luminance for individual pixel.
Whereas max_fall defines frame-average level luminance.
The user may not observe the difference in brightness in between
max_fall and max_cll.
That negatively impacts the user experience.
[How]
Use max_fall value instead of max_cll as a limit for brightness control.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code in dm-log rounds up bitset_size to 32 bits. It then uses
find_next_zero_bit_le on the allocated region. find_next_zero_bit_le
accesses the bitmap using unsigned long pointers. So, on 64-bit
architectures, it may access 4 bytes beyond the allocated size.
Fix this bug by rounding up bitset_size to BITS_PER_LONG.
This bug was found by running the lvm2 testsuite with kasan.
Not all LSR register flags are preserved across reads. Therefore, LSR
readers must store the non-preserved bits into lsr_save_flags.
This fix was initially mixed into feature commit f6f586102add ("serial:
8250: Handle UART without interrupt on TEMT using em485"). However,
that feature change had a flaw and it was reverted to make room for
simpler approach providing the same feature. The embedded fix got
reverted with the feature change.
Re-add the lsr_save_flags fix and properly mark it's a fix.
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
of_node_put() will check NULL pointer.
Fixes: 24a28e428351 ("USB: gadget driver for LPC32xx") Cc: stable <stable@kernel.org> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220603140246.64529-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_create_hcd will alloc memory for hcd, and we should
call usb_put_hcd to free it when platform_get_resource()
fails to prevent memory leak.
goto error2 label instead error1 to fix this.
Fixes: 856e6e8e0f93 ("usb: dwc2: check return value after calling platform_get_resource()") Cc: stable <stable@kernel.org> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220530085413.44068-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding support for Cinterion device MV31 with Qualcomm
new baseline. Use different PIDs to separate it from
previous base line products.
All interfaces settings keep same as previous.
This is used by code that doesn't need CONFIG_CRYPTO, so move this into
lib/ with a Kconfig option so that it can be selected by whatever needs
it.
This fixes a linker error Zheng pointed out when
CRYPTO_MANAGER_DISABLE_TESTS!=y and CRYPTO=m:
lib/crypto/curve25519-selftest.o: In function `curve25519_selftest':
curve25519-selftest.c:(.init.text+0x60): undefined reference to `__crypto_memneq'
curve25519-selftest.c:(.init.text+0xec): undefined reference to `__crypto_memneq'
curve25519-selftest.c:(.init.text+0x114): undefined reference to `__crypto_memneq'
curve25519-selftest.c:(.init.text+0x154): undefined reference to `__crypto_memneq'
Reported-by: Zheng Bin <zhengbin13@huawei.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: stable@vger.kernel.org Fixes: aa127963f1ca ("crypto: lib/curve25519 - re-add selftests") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The expression for setting the size of the allocated bulk TX buffer
(`devpriv->usb_tx_buf`) is calling `usb_endpoint_maxp(devpriv->ep_rx)`,
which is using the wrong endpoint (should be `devpriv->ep_tx`). Fix it.
Fixes: a23461c47482 ("comedi: vmk80xx: fix transfer-buffer overflow") Cc: Johan Hovold <johan@kernel.org> Cc: stable@vger.kernel.org # 4.9+ Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20220607171819.4121-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Even though the DW I2C controller reference clock source is requested by
the method devm_clk_get() with non-optional clock requirement the way the
clock handler is used afterwards has a pure optional clock semantic
(though in some circumstances we can get a warning about the clock missing
printed in the system console). There is no point in reimplementing that
functionality seeing the kernel clock framework already supports the
optional interface from scratch. Thus let's convert the platform driver to
using it.
Note by providing this commit we get to fix two problems. The first one
was introduced in commit c62ebb3d5f0d ("i2c: designware: Add support for
an interface clock"). It causes not having the interface clock (pclk)
enabled/disabled in case if the reference clock isn't provided. The second
problem was first introduced in commit b33af11de236 ("i2c: designware: Do
not require clock when SSCN and FFCN are provided"). Since that
modification the deferred probe procedure has been unsupported in case if
the interface clock isn't ready.
Fixes: c62ebb3d5f0d ("i2c: designware: Add support for an interface clock") Fixes: b33af11de236 ("i2c: designware: Do not require clock when SSCN and FFCN are provided") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
of_find_node_by_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: e3825ba1af3a ("irqchip/gic-v3: Add support for partitioned PPIs") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220601080930.31005-6-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
When kcalloc fails, it missing of_node_put() and results in refcount
leak. Fix this by goto out_put_node label.
Fixes: 52085d3f2028 ("irqchip/gic-v3: Dynamically allocate PPI partition descriptors") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220601080930.31005-5-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
of_find_matching_node_and_match() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: 82b0a434b436 ("irqchip/gic/realview: Support more RealView DCC variants") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220601080930.31005-2-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
If a function lives in a section other than .text, but .text also exists
in the object, faddr2line may wrongly assume .text. This can result in
comically wrong output. For example:
$ scripts/faddr2line vmlinux.o enter_from_user_mode+0x1c
enter_from_user_mode+0x1c/0x30:
find_next_bit at /home/jpoimboe/git/linux/./include/linux/find.h:40
(inlined by) perf_clear_dirty_counters at /home/jpoimboe/git/linux/arch/x86/events/core.c:2504
Fix it by passing the section name to addr2line, unless the object file
is vmlinux, in which case the symbol table uses absolute addresses.
This patch prevents that test nvme/004 triggers the following:
UBSAN: array-index-out-of-bounds in block/blk-mq.h:135:9
index 512 is out of range for type 'long unsigned int [512]'
Call Trace:
show_stack+0x52/0x58
dump_stack_lvl+0x49/0x5e
dump_stack+0x10/0x12
ubsan_epilogue+0x9/0x3b
__ubsan_handle_out_of_bounds.cold+0x44/0x49
blk_mq_alloc_request_hctx+0x304/0x310
__nvme_submit_sync_cmd+0x70/0x200 [nvme_core]
nvmf_connect_io_queue+0x23e/0x2a0 [nvme_fabrics]
nvme_loop_connect_io_queues+0x8d/0xb0 [nvme_loop]
nvme_loop_create_ctrl+0x58e/0x7d0 [nvme_loop]
nvmf_create_ctrl+0x1d7/0x4d0 [nvme_fabrics]
nvmf_dev_write+0xae/0x111 [nvme_fabrics]
vfs_write+0x144/0x560
ksys_write+0xb7/0x140
__x64_sys_write+0x42/0x50
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Fixes: 20e4d8139319 ("blk-mq: simplify queue mapping & schedule with each possisble CPU") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220615210004.1031820-1-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Sometimes it is necessary to use a PLT entry to call an ftrace
trampoline. This is handled by ftrace_make_call() and ftrace_make_nop(),
with each having *almost* identical logic, but this is not handled by
ftrace_modify_call() since its introduction in commit:
Due to this, if we ever were to call ftrace_modify_call() for a callsite
which requires a PLT entry for a trampoline, then either:
a) If the old addr requires a trampoline, ftrace_modify_call() will use
an out-of-range address to generate the 'old' branch instruction.
This will result in warnings from aarch64_insn_gen_branch_imm() and
ftrace_modify_code(), and no instructions will be modified. As
ftrace_modify_call() will return an error, this will result in
subsequent internal ftrace errors.
b) If the old addr does not require a trampoline, but the new addr does,
ftrace_modify_call() will use an out-of-range address to generate the
'new' branch instruction. This will result in warnings from
aarch64_insn_gen_branch_imm(), and ftrace_modify_code() will replace
the 'old' branch with a BRK. This will result in a kernel panic when
this BRK is later executed.
Practically speaking, case (a) is vastly more likely than case (b), and
typically this will result in internal ftrace errors that don't
necessarily affect the rest of the system. This can be demonstrated with
an out-of-tree test module which triggers ftrace_modify_call(), e.g.
We can solve this by consistently determining whether to use a PLT entry
for an address.
Note that since (the earlier) commit:
f1a54ae9af0da4d7 ("arm64: module/ftrace: intialize PLT at load time")
... we can consistently determine the PLT address that a given callsite
will use, and therefore ftrace_make_nop() does not need to skip
validation when a PLT is in use.
This patch factors the existing logic out of ftrace_make_call() and
ftrace_make_nop() into a common ftrace_find_callable_addr() helper
function, which is used by ftrace_make_call(), ftrace_make_nop(), and
ftrace_modify_call(). In ftrace_make_nop() the patching is consistently
validated by ftrace_modify_code() as we can always determine what the
old instruction should have been.
The branch range checks in ftrace_make_call() and ftrace_make_nop() are
incorrect, erroneously permitting a forwards branch of 128M and
erroneously rejecting a backwards branch of 128M.
This is because both functions calculate the offset backwards,
calculating the offset *from* the target *to* the branch, rather than
the other way around as the later comparisons expect.
If an out-of-range branch were erroeously permitted, this would later be
rejected by aarch64_insn_gen_branch_imm() as branch_imm_common() checks
the bounds correctly, resulting in warnings and the placement of a BRK
instruction. Note that this can only happen for a forwards branch of
exactly 128M, and so the caller would need to be exactly 128M bytes
below the relevant ftrace trampoline.
If an in-range branch were erroeously rejected, then:
* For modules when CONFIG_ARM64_MODULE_PLTS=y, this would result in the
use of a PLT entry, which is benign.
Note that this is the common case, as this is selected by
CONFIG_RANDOMIZE_BASE (and therefore RANDOMIZE_MODULE_REGION_FULL),
which distributions typically seelct. This is also selected by
CONFIG_ARM64_ERRATUM_843419.
* For modules when CONFIG_ARM64_MODULE_PLTS=n, this would result in
internal ftrace failures.
* For core kernel text, this would result in internal ftrace failues.
Note that for this to happen, the kernel text would need to be at
least 128M bytes in size, and typical configurations are smaller tha
this.
Fix this by calculating the offset *from* the branch *to* the target in
both functions.
Fixes: f8af0b364e24 ("arm64: ftrace: don't validate branch via PLT in ftrace_make_nop()") Fixes: e71a4e1bebaf ("arm64: ftrace: add support for far branches to dynamic ftrace") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Will Deacon <will@kernel.org> Tested-by: "Ivan T. Ivanov" <iivanov@suse.de> Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20220614080944.1349146-2-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The skb_recv_datagram() in ax25_recvmsg() will hold lock_sock
and block until it receives a packet from the remote. If the client
doesn`t connect to server and calls read() directly, it will not
receive any packets forever. As a result, the deadlock will happen.
This patch replaces skb_recv_datagram() with an open-coded variant of it
releasing the socket lock before the __skb_wait_for_more_packets() call
and re-acquiring it after such call in order that other functions that
need socket lock could be executed.
what's more, the socket lock will be released only when recvmsg() will
block and that should produce nicer overall behavior.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Suggested-by: Thomas Osterried <thomas@osterried.de> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reported-by: Thomas Habets <thomas@@habets.se> Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Both RIF and ACL flow counters use a 24-bit SW-managed counter address to
communicate which counter they want to bind.
In a number of Spectrum FW releases, binding a RIF counter is broken and
slices the counter index to 16 bits. As a result, on Spectrum-2 and above,
no more than about 410 RIF counters can be effectively used. This
translates to 205 netdevices for which L3 HW stats can be enabled. (This
does not happen on Spectrum-1, because there are fewer counters available
overall and the counter index never exceeds 16 bits.)
Binding counters to ACLs does not have this issue. Therefore reorder the
counter allocation scheme so that RIF counters come first and therefore get
lower indices that are below the 16-bit barrier.
[ 00.000000] No UUID available providing old NGUID
New message:
[ 00.000000] block nvme0n1: No UUID available providing old NGUID
Fixes: d934f9848a77 ("nvme: provide UUID value to userspace") Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
sysfs_emit is the recommended API to use for formatting strings to be
returned to user space. It is equivalent to scnprintf and aware of the
PAGE_SIZE buffer size.
Suggested-by: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix our pointer offset usage in error_state_read
when there is no i915_gpu_coredump but buf offset
is non-zero.
This fixes a kernel page fault can happen when
multiple tests are running concurrently in a loop
and one is producing engine resets and consuming
the i915 error_state dump while the other is
forcing full GT resets. (takes a while to trigger).
After PF reset and ethtool -t there was call trace in dmesg
sometimes leading to panic. When there was some time, around 5
seconds, between reset and test there were no errors.
Problem was that pf reset calls i40e_vsi_close in prep_for_reset
and ethtool -t calls i40e_vsi_close in diag_test. If there was not
enough time between those commands the second i40e_vsi_close starts
before previous i40e_vsi_close was done which leads to crash.
Add check to diag_test if pf is in reset and don't start offline
tests if it is true.
Add netif_info("testing failed") into unhappy path of i40e_diag_test()
Fixes: e17bc411aea8 ("i40e: Disable offline diagnostics if VFs are enabled") Fixes: 510efb2682b3 ("i40e: Fix ethtool offline diagnostic with netqueues") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Procedure of configure tc flower filters erroneously allows to create
filters on TC0 where unfiltered packets are also directed by default.
Issue was caused by insufficient checks of hw_tc parameter specifying
the hardware traffic class to pass matching packets to.
Fix checking hw_tc parameter which blocks creation of filters on TC0.
Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.
modpost used to detect it, but it has been broken for a decade.
Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.
There are two ways to fix it:
- Remove __init
- Remove EXPORT_SYMBOL
I chose the latter for this case because the only in-tree call-site,
arch/x86/kernel/cpu/mshyperv.c is never compiled as modular.
(CONFIG_HYPERVISOR_GUEST is boolean)
Fixes: dd2cb348613b ("clocksource/drivers: Continue making Hyper-V clocksource ISA agnostic") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220606050238.4162200-1-masahiroy@kernel.org Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If we're about to send the first layoutget for an empty layout, we want
to make sure that we drain out the existing pending layoutget calls
first. The reason is that these layouts may have been already implicitly
returned to the server by a recall to which the client gave a
NFS4ERR_NOMATCHING_LAYOUT response.
The problem is that wait_var_event_killable() could in principle see the
plh_outstanding count go back to '1' when the first process to wake up
starts sending a new layoutget. If it fails to get a layout, then this
loop can continue ad infinitum...
Fixes: 0b77f97a7e42 ("NFSv4/pnfs: Fix layoutget behaviour after invalidation") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit changes the default Kconfig values of RANDOM_TRUST_CPU and
RANDOM_TRUST_BOOTLOADER to be Y by default. It does not change any
existing configs or change any kernel behavior. The reason for this is
several fold.
As background, I recently had an email thread with the kernel
maintainers of Fedora/RHEL, Debian, Ubuntu, Gentoo, Arch, NixOS, Alpine,
SUSE, and Void as recipients. I noted that some distros trust RDRAND,
some trust EFI, and some trust both, and I asked why or why not. There
wasn't really much of a "debate" but rather an interesting discussion of
what the historical reasons have been for this, and it came up that some
distros just missed the introduction of the bootloader Kconfig knob,
while another didn't want to enable it until there was a boot time
switch to turn it off for more concerned users (which has since been
added). The result of the rather uneventful discussion is that every
major Linux distro enables these two options by default.
While I didn't have really too strong of an opinion going into this
thread -- and I mostly wanted to learn what the distros' thinking was
one way or another -- ultimately I think their choice was a decent
enough one for a default option (which can be disabled at boot time).
I'll try to summarize the pros and cons:
Pros:
- The RNG machinery gets initialized super quickly, and there's no
messing around with subsequent blocking behavior.
- The bootloader mechanism is used by kexec in order for the prior
kernel to initialize the RNG of the next kernel, which increases
the entropy available to early boot daemons of the next kernel.
- Previous objections related to backdoors centered around
Dual_EC_DRBG-like kleptographic systems, in which observing some
amount of the output stream enables an adversary holding the right key
to determine the entire output stream.
This used to be a partially justified concern, because RDRAND output
was mixed into the output stream in varying ways, some of which may
have lacked pre-image resistance (e.g. XOR or an LFSR).
But this is no longer the case. Now, all usage of RDRAND and
bootloader seeds go through a cryptographic hash function. This means
that the CPU would have to compute a hash pre-image, which is not
considered to be feasible (otherwise the hash function would be
terribly broken).
- More generally, if the CPU is backdoored, the RNG is probably not the
realistic vector of choice for an attacker.
- These CPU or bootloader seeds are far from being the only source of
entropy. Rather, there is generally a pretty huge amount of entropy,
not all of which is credited, especially on CPUs that support
instructions like RDRAND. In other words, assuming RDRAND outputs all
zeros, an attacker would *still* have to accurately model every single
other entropy source also in use.
- The RNG now reseeds itself quite rapidly during boot, starting at 2
seconds, then 4, then 8, then 16, and so forth, so that other sources
of entropy get used without much delay.
- Paranoid users can set random.trust_{cpu,bootloader}=no in the kernel
command line, and paranoid system builders can set the Kconfig options
to N, so there's no reduction or restriction of optionality.
- It's a practical default.
- All the distros have it set this way. Microsoft and Apple trust it
too. Bandwagon.
Cons:
- RDRAND *could* still be backdoored with something like a fixed key or
limited space serial number seed or another indexable scheme like
that. (However, it's hard to imagine threat models where the CPU is
backdoored like this, yet people are still okay making *any*
computations with it or connecting it to networks, etc.)
- RDRAND *could* be defective, rather than backdoored, and produce
garbage that is in one way or another insufficient for crypto.
- Suggesting a *reduction* in paranoia, as this commit effectively does,
may cause some to question my personal integrity as a "security
person".
- Bootloader seeds and RDRAND are generally very difficult if not all
together impossible to audit.
Keep in mind that this doesn't actually change any behavior. This
is just a change in the default Kconfig value. The distros already are
shipping kernels that set things this way.
Ard made an additional argument in [1]:
We're at the mercy of firmware and micro-architecture anyway, given
that we are also relying on it to ensure that every instruction in
the kernel's executable image has been faithfully copied to memory,
and that the CPU implements those instructions as documented. So I
don't think firmware or ISA bugs related to RNGs deserve special
treatment - if they are broken, we should quirk around them like we
usually do. So enabling these by default is a step in the right
direction IMHO.
In [2], Phil pointed out that having this disabled masked a bug that CI
otherwise would have caught:
A clean 5.15.45 boots cleanly, whereas a downstream kernel shows the
static key warning (but it does go on to boot). The significant
difference is that our defconfigs set CONFIG_RANDOM_TRUST_BOOTLOADER=y
defining that on top of multi_v7_defconfig demonstrates the issue on
a clean 5.15.45. Conversely, not setting that option in a
downstream kernel build avoids the warning
Currently if the APB or Debounce clocks aren't yet ready to be requested
the DW GPIO driver will correctly handle that by deferring the probe
procedure, but the error is still printed to the system log. It needlessly
pollutes the log since there was no real error but a request to postpone
the clock request procedure since the clocks subsystem hasn't been fully
initialized yet. Let's fix that by using the dev_err_probe method to print
the APB/clock request error status. It will correctly handle the deferred
probe situation and print the error if it actually happens.
set cpu_hwmon as a module build with loongson_sysconf, loongson_chiptemp
undefined error,fix cpu_hwmon compile options to be bool.Some kernel
compilation error information is as follows:
gcc-12 started warning about 'tracker' being used uninitialized:
drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c: In function ‘mlx5_do_bond’:
drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c:786:28: warning: ‘tracker’ is used uninitialized [-Wuninitialized]
786 | struct lag_tracker tracker;
| ^~~~~~~
which seems to be because it doesn't track how the use (and
initialization) is bound by the 'do_bond' flag.
But admittedly that 'do_bond' usage is fairly complicated, and involves
passing it around as an argument to helper functions, so it's somewhat
understandable that gcc doesn't see how that all works.
This function could be rewritten to make the use of that tracker
variable more obviously safe, but for now I'm just adding the forced
initialization of it.
When rx_flag == MTK_RX_FLAGS_HWLRO,
rx_data_len = MTK_MAX_LRO_RX_LENGTH(4096 * 3) > PAGE_SIZE.
netdev_alloc_frag is for alloction of page fragment only.
Reference to other drivers and Documentation/vm/page_frags.rst
Branch to use __get_free_pages when ring->frag_size > PAGE_SIZE.
When len >= INT_MAX - transhdrlen, ulen = len + transhdrlen will be
overflow. To fix, we can follow what udpv6 does and subtract the
transhdrlen from the max.
Similar to the handling of play_deferred in commit 19cfe912c37b
("Bluetooth: btusb: Fix memory leak in play_deferred"), we thought
a patch might be needed here as well.
Currently usb_submit_urb is called directly to submit deferred tx
urbs after unanchor them.
So the usb_giveback_urb_bh would failed to unref it in usb_unanchor_urb
and cause memory leak.
Put those urbs in tx_anchor to avoid the leak, and also fix the error
handling.
Signed-off-by: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220607083230.6182-1-xiaohuizhang@ruc.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The reference must be released when device_register(&vm_cmdline_parent)
failed. Add the corresponding 'put_device()' in the error handling path.
Signed-off-by: chengkaitao <pilgrimtao@gmail.com>
Message-Id: <20220602005542.16489-1-chengkaitao@didiglobal.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix missing resource cleanup (when '(--i) == 0') for error case in
ipr_alloc_mem() and skip incorrect resource cleanup (when '(--i) == 0') for
error case in ipr_request_other_msi_irqs() because variable i started from
1.
Link: https://lore.kernel.org/r/20220529153456.4183738-4-cgxu519@mykernel.net Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Chengguang Xu <cgxu519@mykernel.net> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
NVMe Asynchronous Event Request commands have no command timeout value per
specifications.
Set WQE option to allow a reduced FLUSH polling rate for I/O error
detection specifically for nvme_admin_async_event commands.
Link: https://lore.kernel.org/r/20220603174329.63777-9-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
After issuing a LIP, a specific target vendor does not ACC the FLOGI that
lpfc sends. However, it does send its own FLOGI that lpfc ACCs. The
target then establishes the port IDs by sending a PLOGI. lpfc PLOGI_ACCs
and starts the RPI registration for DID 0x000001. The target then sends a
LOGO to the fabric DID. lpfc is currently treating the LOGO from the
fabric DID as a link down and cleans up all the ndlps. The ndlp for DID
0x000001 is put back into NPR and discovery stops, leaving the port in
stuck in bypassed mode.
Change lpfc behavior such that if a LOGO is received for the fabric DID in
PT2PT topology skip the lpfc_linkdown_port() routine and just move the
fabric DID back to NPR.
Link: https://lore.kernel.org/r/20220603174329.63777-7-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
vcpuHint has been expanded to 16 bit on host to enable routing to more
CPUs. Guest side should align with the change. This change has been tested
with hosts with 8-bit and 16-bit vcpuHint, on both platforms host side can
get correct value.
Commit 223f61b8c5ad ("Input: soc_button_array - add Lenovo Yoga Tablet2
1051L to the dmi_use_low_level_irq list") added the 1051L to this list
already, but the same problem applies to the 1051F. As there are no
further 1051 variants (just the F/L), we can just DMI match 1051.
Tested on a Lenovo Yoga Tablet2 1051F: Without this patch the
home-button stops working after a wakeup from suspend.
Signed-off-by: Marius Hoch <mail@mariushoch.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220603120246.3065-1-mail@mariushoch.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently wm_adsp_fw_put() returns 0 rather than 1 when updating the value
of the control, meaning that no event is generated to userspace. Fix this
by setting the default return value to 1, the code already exits early with
a return value of 0 if the value is unchanged.
Currently the put() method for the deemphasis control returns 0 when a new
value is written to the control even if the value changed, meaning events
are not generated. Fix this, skip the work of updating the value when it is
unchanged and then return 1 after having done so.
As described in commit 02117b8ae9c0 ("f2fs: Set GF_NOFS in
read_cache_page_gfp while doing f2fs_quota_read"), we must not enter
filesystem reclaim while holding the dq_lock. Prevent this more generally
by using memalloc_nofs_save() while holding the lock.
In an unlikely (and probably wrong?) case that the 'ppi' parameter of
ata_host_alloc_pinfo() points to an array starting with a NULL pointer,
there's going to be a kernel oops as the 'pi' local variable won't get
reassigned from the initial value of NULL. Initialize 'pi' instead to
'&ata_dummy_port_info' to fix the possible kernel oops for good...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The minimum value for the PGA Volume is given as 0x1A, however the
values from there to 0x19 are all the same volume and this is not
represented in the TLV structure. The number of volumes given is correct
so this leads to all the volumes being shifted. Move the minimum value
up to 0x19 to fix this.
A couple of the SX volume controls specify 0x84 as the lowest volume
value, however the correct value from the datasheet is 0x44. The
datasheet don't include spaces in the value it displays as binary so
this was almost certainly just a typo reading 1000100.
Limit the error msg to avoid flooding the console. If you have a lot of
threads hitting this at once, they could have already gotten passed the
dma_debug_disabled() check before they get to the point of allocation
failure, resulting in quite a lot of this error message spamming the
log. Use pr_err_once() to limit that.
Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
We tried to enable the audio on an imx6sx EVB with the codec nau8822,
after setting the internal PLL fractional parameters, the audio still
couldn't work and the there was no sdma irq at all.
After checking with the section "8.1.1 Phase Locked Loop (PLL) Design
Example" of "NAU88C22 Datasheet Rev 0.6", we found we need to
turn off the PLL before programming fractional parameters and turn on
the PLL after programming.
After this change, the audio driver could record and play sound and
the sdma's irq is triggered when playing or recording.
Cc: David Lin <ctlin0@nuvoton.com> Cc: John Hsu <kchsu0@nuvoton.com> Cc: Seven Li <wtli@nuvoton.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20220530040151.95221-2-hui.wang@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Memory state around the buggy address: d216f800: 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00 00 00 00 d216f880: f2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d216f900: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00
^ d216f980: f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 00 00 d216fa00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
After looking into this issue, I find the buggy address belongs
to the task stack region. It seems KASAN has something wrong.
I look into the code of __get_wchan in x86 architecture and
find the same issue has been resolved by the commit f7d27c35ddff ("x86/mm, kasan: Silence KASAN warnings in get_wchan()").
The solution could be applied to powerpc architecture too.
As Andrey Ryabinin said, get_wchan() is racy by design, it may
access volatile stack of running task, thus it may access
redzone in a stack frame and cause KASAN to warn about this.
Use READ_ONCE_NOCHECK() to silence these warnings.
Reported-by: Wanming Hu <huwanming@huaweil.com> Signed-off-by: He Ying <heying24@huawei.com> Signed-off-by: Chen Jingwen <chenjingwen6@huawei.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220121014418.155675-1-heying24@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a header for a DB9 serial port, but any attempts to use
hardware handshaking fail. Enable RTS and CTS pin muxing and enable
handshaking in the uart node.
Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is correct for upstream branch but incorrect for 5.4/5.10 branches,
as the 5.4/5.10 branches do not have the commit 370868107bf6 ("bpf:
Eliminate rlimit-based memory accounting for stackmap maps"), so the
bpf_map_charge_init() function has not been removed.
Currently the bpf_map_charge_init() function in 5.4/5.10 branches takes a
wrong memory charge cost, the
The nfsd_file nf_rwsem is currently being used to separate file write
and commit instances to ensure that we catch errors and apply them to
the correct write/commit.
We can improve scalability at the expense of a little accuracy (some
extra false positives) by replacing the nf_rwsem with more careful
use of the errseq_t mechanism to track errors across the different
operations.
In commit 45089142b149 Aneesh had missed one (admittedly, very unlikely
to hit) case in v9fs_stat2inode_dotl(). However, the same considerations
apply there as well - we have no business whatsoever to change ->i_rdev
or the file type.
Cc: Tadeusz Struk <tadeusz.struk@linaro.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / linux-stable / log