This patch results in some qemu test failures, specifically xilinx-zynq-a9
machine and zynq-zc702 as well as zynq-zed devicetree files, when trying
to boot from USB drive.
We have two types of task_work based creation, one is using an existing
worker to setup a new one (eg when going to sleep and we have no free
workers), and the other is allocating a new worker. Only the latter
should be freed when we cancel task_work creation for a new worker.
Fixes: af82425c6a2d ("io_uring/io-wq: free worker if task_work creation is canceled") Reported-by: syzbot+d56ec896af3637bdb7e4@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Userspace can guess the handle value and try to race GEM object creation
with handle close, resulting in a use-after-free if we dereference the
object after dropping the handle's reference. For that reason, dropping
the handle's reference must be done *after* we are done dereferencing
the object.
The inline assembly for arm64's cmpxchg_double*() implementations use a
+Q constraint to hazard against other accesses to the memory location
being exchanged. However, the pointer passed to the constraint is a
pointer to unsigned long, and thus the hazard only applies to the first
8 bytes of the location.
GCC can take advantage of this, assuming that other portions of the
location are unchanged, leading to a number of potential problems.
This is similar to what we fixed back in commit:
fee960bed5e857eb ("arm64: xchg: hazard against entire exchange variable")
... but we forgot to adjust cmpxchg_double*() similarly at the same
time.
The same problem applies, as demonstrated with the following test:
Notice that at the lines with "BANG" comments, GCC has assumed that the
higher 8 bytes are unchanged by the cmpxchg_double() call, and that
`hi_old ^ hi_new` can be reduced to a constant zero, for both LSE and
LL/SC versions of cmpxchg_double().
This patch fixes the issue by passing a pointer to __uint128_t into the
+Q constraint, ensuring that the compiler hazards against the entire 16
bytes being modified.
With this change, GCC 12.1.0 compiles the above test as:
... sampling the high 8 bytes before and after the cmpxchg, and
performing an EOR, as we'd expect.
For backporting, I've tested this atop linux-4.9.y with GCC 5.5.0. Note
that linux-4.9.y is oldest currently supported stable release, and
mandates GCC 5.1+. Unfortunately I couldn't get a GCC 5.1 binary to run
on my machines due to library incompatibilities.
I've also used a standalone test to check that we can use a __uint128_t
pointer in a +Q constraint at least as far back as GCC 4.8.5 and LLVM
3.9.1.
When CONFIG_ARM64_LSE_ATOMICS=y, each use of an LL/SC atomic results in
a fragment of code being generated in a subsection without a clear
association with its caller. A trampoline in the caller branches to the
LL/SC atomic with with a direct branch, and the atomic directly branches
back into its trampoline.
This breaks backtracing, as any PC within the out-of-line fragment will
be symbolized as an offset from the nearest prior symbol (which may not
be the function using the atomic), and since the atomic returns with a
direct branch, the caller's PC may be missing from the backtrace.
For example, with secondary_start_kernel() hacked to contain
atomic_inc(NULL), the resulting exception can be reported as being taken
from cpus_are_stuck_in_kernel():
The rationale was to improve icache performance by grouping the LL/SC
atomics together. This has never been measured, and this theoretical
benefit is outweighed by other factors:
* As the subsections are collapsed into sections at object file
granularity, these are spread out throughout the kernel and can share
cachelines with unrelated code regardless.
* GCC 12.1.0 has been observed to place the trampoline out-of-line in
specialised __ll_sc_*() functions, introducing more branching than was
intended.
* Removing the trampolines has been observed to shrink a defconfig
kernel Image by 64KiB when building with GCC 12.1.0.
This patch removes the LL/SC trampolines, meaning that the LL/SC atomics
will be inlined into their callers (or placed in out-of line functions
using regular BL/RET pairs). When CONFIG_ARM64_LSE_ATOMICS=y, the LL/SC
atomics are always called in an unlikely branch, and will be placed in a
cold portion of the function, so this should have minimal impact to the
hot paths.
Other than the improved backtracing, there should be no functional
change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220817155914.3975112-2-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Stable-dep-of: 031af50045ea ("arm64: cmpxchg_double*: hazard against entire exchange variable") Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch makes the indentation consistent and also aligns the trailing
backslashes. This makes the code easier to read for those (like myself)
who are easily distracted by these inconsistencies.
This is intended as a cleanup.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Acked-by: Will Deacon <will@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20211210151410.2782645-2-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Stable-dep-of: 031af50045ea ("arm64: cmpxchg_double*: hazard against entire exchange variable") Signed-off-by: Sasha Levin <sashal@kernel.org>
When the user moves a running task to a new rdtgroup using the task's
file interface or by deleting its rdtgroup, the resulting change in
CLOSID/RMID must be immediately propagated to the PQR_ASSOC MSR on the
task(s) CPUs.
x86 allows reordering loads with prior stores, so if the task starts
running between a task_curr() check that the CPU hoisted before the
stores in the CLOSID/RMID update then it can start running with the old
CLOSID/RMID until it is switched again because __rdtgroup_move_task()
failed to determine that it needs to be interrupted to obtain the new
CLOSID/RMID.
Refer to the diagram below:
CPU 0 CPU 1
----- -----
__rdtgroup_move_task():
curr <- t1->cpu->rq->curr
__schedule():
rq->curr <- t1
resctrl_sched_in():
t1->{closid,rmid} -> {1,1}
t1->{closid,rmid} <- {2,2}
if (curr == t1) // false
IPI(t1->cpu)
A similar race impacts rdt_move_group_tasks(), which updates tasks in a
deleted rdtgroup.
In both cases, use smp_mb() to order the task_struct::{closid,rmid}
stores before the loads in task_curr(). In particular, in the
rdt_move_group_tasks() case, simply execute an smp_mb() on every
iteration with a matching task.
It is possible to use a single smp_mb() in rdt_move_group_tasks(), but
this would require two passes and a means of remembering which
task_structs were updated in the first loop. However, benchmarking
results below showed too little performance impact in the simple
approach to justify implementing the two-pass approach.
Times below were collected using `perf stat` to measure the time to
remove a group containing a 1600-task, parallel workload.
CPU: Intel(R) Xeon(R) Platinum P-8136 CPU @ 2.00GHz (112 threads)
James reported in [1] that there could be two tasks running on the same CPU
with task_struct->on_cpu set. Using task_struct->on_cpu as a test if a task
is running on a CPU may thus match the old task for a CPU while the
scheduler is running and IPI it unnecessarily.
task_curr() is the correct helper to use. While doing so move the #ifdef
check of the CONFIG_SMP symbol to be a C conditional used to determine
if this helper should be used to ensure the code is always checked for
correctness by the compiler.
Passing the host topology to the guest is almost certainly wrong
and will confuse the scheduler. In addition, several fields of
these CPUID leaves vary on each processor; it is simply impossible to
return the right values from KVM_GET_SUPPORTED_CPUID in such a way that
they can be passed to KVM_SET_CPUID2.
The values that will most likely prevent confusion are all zeroes.
Userspace will have to override it anyway if it wishes to present a
specific topology to the guest.
Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages()
only releases pages to the buddy allocator if they are not in the
deferred range. This is correct for free pages (as defined by
for_each_free_mem_pfn_range_in_zone()) because free pages in the
deferred range will be initialized and released as part of the deferred
init process. memblock_free_pages() is called by memblock_free_late(),
which is used to free reserved ranges after memblock_free_all() has
run. All pages in reserved ranges have been initialized at that point,
and accordingly, those pages are not touched by the deferred init
process. This means that currently, if the pages that
memblock_free_late() intends to release are in the deferred range, they
will never be released to the buddy allocator. They will forever be
reserved.
In addition, memblock_free_pages() calls kmsan_memblock_free_pages(),
which is also correct for free pages but is not correct for reserved
pages. KMSAN metadata for reserved pages is initialized by
kmsan_init_shadow(), which runs shortly before memblock_free_all().
For both of these reasons, memblock_free_pages() should only be called
for free pages, and memblock_free_late() should call __free_pages_core()
directly instead.
One case where this issue can occur in the wild is EFI boot on
x86_64. The x86 EFI code reserves all EFI boot services memory ranges
via memblock_reserve() and frees them later via memblock_free_late()
(efi_reserve_boot_services() and efi_free_boot_services(),
respectively). If any of those ranges happens to fall within the
deferred init range, the pages will not be released and that memory will
be unavailable.
For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI:
.max_adj of ptp_clock_info acts as an absolute value for the amount in ppb
that can be set for a single call of .adjfine. This means that a single
call to .getfine cannot be greater than .max_adj or less than -(.max_adj).
Provides correct value for max frequency adjustment value supported by
devices.
The 'TCA_MPLS_LABEL' attribute is of 'NLA_U32' type, but has a
validation type of 'NLA_VALIDATE_FUNCTION'. This is an invalid
combination according to the comment above 'struct nla_policy':
"
Meaning of `validate' field, use via NLA_POLICY_VALIDATE_FN:
NLA_BINARY Validation function called for the attribute.
All other Unused - but note that it's a union
"
This can trigger the warning [1] in nla_get_range_unsigned() when
validation of the attribute fails. Despite being of 'NLA_U32' type, the
associated 'min'/'max' fields in the policy are negative as they are
aliased by the 'validate' field.
Fix by changing the attribute type to 'NLA_BINARY' which is consistent
with the above comment and all other users of NLA_POLICY_VALIDATE_FN().
As a result, move the length validation to the validation function.
Fix a use-after-free that occurs in hcd when in_urb sent from
pn533_usb_send_frame() is completed earlier than out_urb. Its callback
frees the skb data in pn533_send_async_complete() that is used as a
transfer buffer of out_urb. Wait before sending in_urb until the
callback of out_urb is called. To modify the callback of out_urb alone,
separate the complete function of out_urb and ack_urb.
The currently lockless access to the xen console list in
vtermno_to_xencons() is incorrect, as additions and removals from the
list can happen anytime, and as such the traversal of the list to get
the private console data for a given termno needs to happen with the
lock held. Note users that modify the list already do so with the
lock taken.
Adjust current lock takers to use the _irq{save,restore} helpers,
since the context in which vtermno_to_xencons() is called can have
interrupts disabled. Use the _irq{save,restore} set of helpers to
switch the current callers to disable interrupts in the locked region.
I haven't checked if existing users could instead use the _irq
variant, as I think it's safer to use _irq{save,restore} upfront.
While there switch from using list_for_each_entry_safe to
list_for_each_entry: the current entry cursor won't be removed as
part of the code in the loop body, so using the _safe variant is
pointless.
PF netdev can request AF to enable or disable reception and transmission
on assigned CGX::LMAC. The current code instead of disabling or enabling
'reception and transmission' also disables/enable the LMAC. This patch
fixes this issue.
Firmware configures NIX block mapping for all CGXs
to achieve maximum throughput. This patch reads
the configuration and create mapping between RVU
PF and NIX blocks. And for LBK VFs assign NIX0 for
even numbered VFs and NIX1 for odd numbered VFs.
Since multiple blocks of same type are present in
98xx, modify functions which get resource count and
which update resource count to work with individual
block address instead of block type.
node 1 | node 2
------ | ------
link is established | link is established
reboot | link is reset
up | send discovery message
receive discovery message |
link is established | link is established
send discovery message |
| receive discovery message
| link is reset (unexpected)
| send reset message
link is reset |
It is due to delayed re-discovery as described in function
tipc_node_check_dest(): "this link endpoint has already reset
and re-established contact with the peer, before receiving a
discovery message from that node."
However, commit 598411d70f85 has changed the condition for calling
tipc_node_link_down() which was the acceptance of new media address.
This commit fixes this by restoring the old and correct behavior.
Fixes: 598411d70f85 ("tipc: make resetting of links non-atomic") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Restore volume after charge pump and PGA activation to ensure
that volume settings are correctly applied when re-enabling codec
from SND_SOC_BIAS_OFF state.
CLASS_W, CHARGE_PUMP and POWER_MANAGEMENT_2 register configuration
affect how the volume register are applied and must be configured first.
With 'GNU assembler (GNU Binutils for Debian) 2.39.90.20221231' the
build now reports:
arch/x86/realmode/rm/../../boot/bioscall.S: Assembler messages:
arch/x86/realmode/rm/../../boot/bioscall.S:35: Warning: found `movsd'; assuming `movsl' was meant
arch/x86/realmode/rm/../../boot/bioscall.S:70: Warning: found `movsd'; assuming `movsl' was meant
arch/x86/boot/bioscall.S: Assembler messages:
arch/x86/boot/bioscall.S:35: Warning: found `movsd'; assuming `movsl' was meant
arch/x86/boot/bioscall.S:70: Warning: found `movsd'; assuming `movsl' was meant
Which is due to:
PR gas/29525
Note that with the dropped CMPSD and MOVSD Intel Syntax string insn
templates taking operands, mixed IsString/non-IsString template groups
(with memory operands) cannot occur anymore. With that
maybe_adjust_templates() becomes unnecessary (and is hence being
removed).
More details: https://sourceware.org/bugzilla/show_bug.cgi?id=29525
Borislav Petkov further explains:
" the particular problem here is is that the 'd' suffix is
"conflicting" in the sense that you can have SSE mnemonics like movsD %xmm...
and the same thing also for string ops (which is the case here) so apparently
the agreement in binutils land is to use the always accepted suffixes 'l' or 'q'
and phase out 'd' slowly... "
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 2869, name: perf-exec
preempt_count: 2, expected: 0
4 locks held by perf-exec/2869:
#0: c00000004325c540 (&sig->cred_guard_mutex){+.+.}-{3:3}, at: bprm_execve+0x64/0xa90
#1: c00000004325c5d8 (&sig->exec_update_lock){++++}-{3:3}, at: begin_new_exec+0x460/0xef0
#2: c0000003fa99d4e0 (&cpuctx_lock){-...}-{2:2}, at: perf_event_exec+0x290/0x510
#3: c000000017ab8418 (&ctx->lock){....}-{2:2}, at: perf_event_exec+0x29c/0x510
irq event stamp: 4806
hardirqs last enabled at (4805): [<c000000000f65b94>] _raw_spin_unlock_irqrestore+0x94/0xd0
hardirqs last disabled at (4806): [<c0000000003fae44>] perf_event_exec+0x394/0x510
softirqs last enabled at (0): [<c00000000013c404>] copy_process+0xc34/0x1ff0
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 36 PID: 2869 Comm: perf-exec Not tainted 6.2.0-rc2-00011-g1247637727f2 #61
Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV
Call Trace:
dump_stack_lvl+0x98/0xe0 (unreliable)
__might_resched+0x2f8/0x310
__mutex_lock+0x6c/0x13f0
thread_imc_event_add+0xf4/0x1b0
event_sched_in+0xe0/0x210
merge_sched_in+0x1f0/0x600
visit_groups_merge.isra.92.constprop.166+0x2bc/0x6c0
ctx_flexible_sched_in+0xcc/0x140
ctx_sched_in+0x20c/0x2a0
ctx_resched+0x104/0x1c0
perf_event_exec+0x340/0x510
begin_new_exec+0x730/0xef0
load_elf_binary+0x3f8/0x1e10
...
do not call blocking ops when !TASK_RUNNING; state=2001 set at [<00000000fd63e7cf>] do_nanosleep+0x60/0x1a0
WARNING: CPU: 36 PID: 2869 at kernel/sched/core.c:9912 __might_sleep+0x9c/0xb0
CPU: 36 PID: 2869 Comm: sleep Tainted: G W 6.2.0-rc2-00011-g1247637727f2 #61
Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV
NIP: c000000000194a1c LR: c000000000194a18 CTR: c000000000a78670
REGS: c00000004d2134e0 TRAP: 0700 Tainted: G W (6.2.0-rc2-00011-g1247637727f2)
MSR: 9000000000021033 <SF,HV,ME,IR,DR,RI,LE> CR: 48002824 XER: 00000000
CFAR: c00000000013fb64 IRQMASK: 1
The above warning triggered because the current imc-pmu code uses mutex
lock in interrupt disabled sections. The function mutex_lock()
internally calls __might_resched(), which will check if IRQs are
disabled and in case IRQs are disabled, it will trigger the warning.
Fix the issue by changing the mutex lock to spinlock.
Fixes: 8f95faaac56c ("powerpc/powernv: Detect and create IMC device") Reported-by: Michael Petlan <mpetlan@redhat.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
[mpe: Fix comments, trim oops in change log, add reported-by tags] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230106065157.182648-1-kjain@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When first_ip is 0, last_ip is 0xFFFFFFFF, and netmask is 31, the value of
an arithmetic expression 2 << (netmask - mask_bits - 1) is subject
to overflow due to a failure casting operands to a larger data type
before performing the arithmetic.
Note that it's harmless since the value will be checked at the next step.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: b9fed748185a ("netfilter: ipset: Check and reject crazy /0 input parameters") Signed-off-by: Ilia.Gavrilov <Ilia.Gavrilov@infotecs.ru> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CPU: 1 PID: 4625 Comm: syz-executor.2 Not tainted 6.1.0-rc4-syzkaller-62821-gcb231e2f67ec #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
=====================================================
Now, 'ext4_alloc_inode()' didn't init 'ei->i_flags'. If new inode failed
before set 'ei->i_flags' in '__ext4_new_inode()', then do 'iput()'. As after 6bc0d63dad7f commit will access 'ei->i_flags' in 'ext4_evict_inode()' which
will lead to access uninit-value.
To solve above issue just init 'ei->i_flags' in 'ext4_alloc_inode()'.
Reported-by: syzbot+57b25da729eb0b88177d@syzkaller.appspotmail.com Signed-off-by: Ye Bin <yebin10@huawei.com> Fixes: 6bc0d63dad7f ("ext4: remove EA inode entry from mbcache on inode eviction") Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20221117073603.2598882-1-yebin@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Since commit 0f0101719138 ("usb: dwc3: Don't switch OTG -> peripheral
if extcon is present") Dual Role support on Intel Merrifield platform
broke due to rearranging the call to dwc3_get_extcon().
It appears to be caused by ulpi_read_id() on the first test write failing
with -ETIMEDOUT. Currently ulpi_read_id() expects to discover the phy via
DT when the test write fails and returns 0 in that case, even if DT does not
provide the phy. As a result usb probe completes without phy.
Make ulpi_read_id() return -ETIMEDOUT to its user if the first test write
fails. The user should then handle it appropriately. A follow up patch
will make dwc3_core_init() set -EPROBE_DEFER in this case and bail out.
Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT") Cc: stable@vger.kernel.org Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Ferry Toth <ftoth@exalondelft.nl> Link: https://lore.kernel.org/r/20221205201527.13525-2-ftoth@exalondelft.nl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Make sure to also limit the amount of soft reset retries for transaction
errors on streams in cases where the transaction error event doesn't point
to any specific TRB.
In these cases we don't know the TRB or stream ring, but we do know which
endpoint had the error.
To keep error counting simple and functional, move the current err_count
from ring structure to endpoint structure.
Halted endpoints can be discoverd both when handling transfer events and
command completion events. Move code that handles halted endpoints before
both of those event handlers.
Rename the function to xhci_handle_halted_ep() to better describe
what it does. Try to reserve "cleanup" word in function names for last
stage cleanup activities.
Create a separate helper function to issue reset endpont commands
to clear halted endpoints.
This is useful for cases where a halted endpoint is discovered while
completing another command, and the endpoint halt needs to be cleared
with a endpoint reset first.
When handling transfer events the event is passed along the handling
callpath and parsed again in several occasions.
The event contains slot_id and endpoint index, from which the driver
endpoint structure can be found. There wasn't however a way to get the
endpoint index or parent usb device from this endpoint structure.
A lot of extra event parsing, and thus some DMA doublefetch cases,
and excess variables and code can be avoided by adding endpoint index
and parent usb virt device pointer to the endpoint structure.
32K usb suspend clock gate is shared with usb_root_clk, this
shared clock gate was initially defined only for usb suspend
clock, usb suspend clk is kept on while system is active or
system sleep with usb wakeup enabled, so usb root clock is
fine with this situation; with the commit cf7f3f4fa9e5
("clk: imx8mp: fix usb_root_clk parent"), this clock gate is
changed to be for usb root clock, but usb root clock will
be off while usb is suspended, so usb suspend clock will be
gated too, this cause some usb functionalities will not work,
so define this clock to be a shared clock gate to conform with
the real HW status.
Fixes: 9c140d9926761 ("clk: imx: Add support for i.MX8MP clock driver") Cc: stable@vger.kernel.org # v5.19+ Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/1664549663-20364-2-git-send-email-jun.li@nxp.com Signed-off-by: Sasha Levin <sashal@kernel.org>
usb suspend clock has a gate shared with usb_root_clk.
Fixes: 9c140d9926761 ("clk: imx: Add support for i.MX8MP clock driver") Cc: stable@vger.kernel.org # v5.19+ Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/1664549663-20364-1-git-send-email-jun.li@nxp.com Signed-off-by: Sasha Levin <sashal@kernel.org>
clkout1 and clkout2 allow to supply clocks from the SoC to the board,
which is used by some board designs to provide reference clocks.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220427162131.3127303-1-l.stach@pengutronix.de Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Stable-dep-of: 5c1f7f109094 ("dt-bindings: clocks: imx8mp: Add ID for usb suspend clock") Signed-off-by: Sasha Levin <sashal@kernel.org>
Add pixel clock for second LCDIFv3 interface. Both LCDIFv3 interfaces use
the same set of parent clock, so deduplicate imx8mp_media_disp1_pix_sels
into common imx8mp_media_disp_pix_sels and use it for both.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Abel Vesa <abel.vesa@nxp.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220313123949.207284-1-marex@denx.de Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Stable-dep-of: 5c1f7f109094 ("dt-bindings: clocks: imx8mp: Add ID for usb suspend clock") Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, these options cause the following libkmod error:
libkmod: ERROR ../libkmod/libkmod-config.c:489 kcmdline_parse_result: \
Ignoring bad option on kernel command line while parsing module \
name: 'ivrs_xxxx[XX:XX'
Fix by introducing a new parameter format for these options and
throw a warning for the deprecated format.
Users are still allowed to omit the PCI Segment if zero.
Adding a Link: to the reason why we're modding the syntax parsing
in the driver and not in libkmod.
By default, PCI segment is zero and can be omitted. To support system
with non-zero PCI segment ID, modify the parsing functions to allow
PCI segment ID.
There is a race condition where mhi_prepare_channel() updates the
read and write pointers as the base address and in parallel, if
an M0 transition occurs, the tasklet goes ahead and rings
doorbells for all channels with a delta in TRE rings assuming
they are already enabled. This causes a null pointer access. Fix
it by adding a channel enabled check before ringing channel
doorbells.
The total cork length created by ip6_append_data includes extension
headers, so we must exclude them when comparing them against the
IPV6_CHECKSUM offset which does not include extension headers.
Reported-by: Kyle Zeng <zengyhkyle@gmail.com> Fixes: 357b40a18b04 ("[IPV6]: IPV6_CHECKSUM socket option can corrupt kernel memory") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As the comment of pci_get_domain_bus_and_slot() says, it
returns a PCI device with refcount incremented, when finish
using it, the caller must decrement the reference count by
calling pci_dev_put().
In ixgbe_get_first_secondary_devfn() and ixgbe_x550em_a_has_mii(),
pci_dev_put() is called to avoid leak.
Fixes: 8fa10ef01260 ("ixgbe: register a mdiobus") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are 3 possible interrupt sources are handled by DP controller,
HPDstatus, Controller state changes and Aux read/write transaction.
At every irq, DP controller have to check isr status of every interrupt
sources and service the interrupt if its isr status bits shows interrupts
are pending. There is potential race condition may happen at current aux
isr handler implementation since it is always complete dp_aux_cmd_fifo_tx()
even irq is not for aux read or write transaction. This may cause aux read
transaction return premature if host aux data read is in the middle of
waiting for sink to complete transferring data to host while irq happen.
This will cause host's receiving buffer contains unexpected data. This
patch fixes this problem by checking aux isr and return immediately at
aux isr handler if there are no any isr status bits set.
Current there is a bug report regrading eDP edid corruption happen during
system booting up. After lengthy debugging to found that VIDEO_READY
interrupt was continuously firing during system booting up which cause
dp_aux_isr() to complete dp_aux_cmd_fifo_tx() prematurely to retrieve data
from aux hardware buffer which is not yet contains complete data transfer
from sink. This cause edid corruption.
Follows are the signature at kernel logs when problem happen,
EDID has corrupt header
panel-simple-dp-aux aux-aea0000.edp: Couldn't identify panel via EDID
Changes in v2:
-- do complete if (ret == IRQ_HANDLED) ay dp-aux_isr()
-- add more commit text
Changes in v3:
-- add Stephen suggested
-- dp_aux_isr() return IRQ_XXX back to caller
-- dp_ctrl_isr() return IRQ_XXX back to caller
Changes in v4:
-- split into two patches
Changes in v5:
-- delete empty line between tags
Changes in v6:
-- remove extra "that" and fixed line more than 75 char at commit text
So far the adreno quirks have all been assigned with an OR operator,
which is problematic, because they were assigned consecutive integer
values, which makes checking them with an AND operator kind of no bueno..
Switch to using BIT(n) so that only the quirks that the programmer chose
are taken into account when evaluating info->quirks & ADRENO_QUIRK_...
Fixes: 370063ee427a ("drm/msm/adreno: Add A540 support") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/516456/ Link: https://lore.kernel.org/r/20230102100201.77286-1-konrad.dybcio@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If smb311 posix is enabled, we send the intended mode for file
creation in the posix create context. Instead of using what's there on
the stack, create the mfsymlink file with 0644.
Fixes: ce558b0e17f8a ("smb3: Add posix create context for smb3.11 posix mounts") Cc: stable@vger.kernel.org Signed-off-by: Volker Lendecke <vl@samba.org> Reviewed-by: Tom Talpey <tom@talpey.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure that *ptr__ within arch_this_cpu_to_op_simple() is only
dereferenced once by using READ_ONCE(). Otherwise the compiler could
generate incorrect code.
The current cmpxchg_double() loops within the perf hw sampling code do not
have READ_ONCE() semantics to read the old value from memory. This allows
the compiler to generate code which reads the "old" value several times
from memory, which again allows for inconsistencies.
The compiler could generate code where te->flags used within the
cmpxchg_double() call may be refetched from memory and which is not
necessarily identical to the previous read version which was used to
generate te_flags. Which in turn means that an incorrect update could
happen.
Fix this by adding READ_ONCE() semantics to all cmpxchg_double()
loops. Given that READ_ONCE() cannot generate code on s390 which atomically
reads 16 bytes, use a private compare-and-swap-double implementation to
achieve that.
Also replace cmpxchg_double() with the private implementation to be able to
re-use the old value within the loops.
As a side effect this converts the whole code to only use bit fields
to read and modify bits within the hws trailer header.
Reported-by: Alexander Gordeev <agordeev@linux.ibm.com> Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Acked-by: Hendrik Brueckner <brueckner@linux.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.ibm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/linux-s390/Y71QJBhNTIatvxUT@osiris/T/#ma14e2a5f7aa8ed4b94b6f9576799b3ad9c60f333 Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These indices should reference the ID placed within the dai_driver
array, not the indices of the array itself.
This fixes commit 4ff028f6c108 ("ASoC: qcom: lpass-cpu: Make I2S SD
lines configurable"), which among others, broke IPQ8064 audio
(sound/soc/qcom/lpass-ipq806x.c) because it uses ID 4 but we'd stop
initializing the mi2s_playback_sd_mode and mi2s_capture_sd_mode arrays
at ID 0.
Fixes: 4ff028f6c108 ("ASoC: qcom: lpass-cpu: Make I2S SD lines configurable") Cc: <stable@vger.kernel.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20221231061545.2110253-1-computersforpeace@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit addresses the following erroneous situation with file-based
kdump executed on a system with a valid IPL report.
On s390, a kdump kernel, its initrd and IPL report if present are loaded
into a special and reserved on boot memory region - crashkernel. When
a system crashes and kdump was activated before, the purgatory code
is entered first which swaps the crashkernel and [0 - crashkernel size]
memory regions. Only after that the kdump kernel is entered. For this
reason, the pointer to an IPL report in lowcore must point to the IPL report
after the swap and not to the address of the IPL report that was located in
crashkernel memory region before the swap. Failing to do so, makes the
kdump's decompressor try to read memory from the crashkernel memory region
which already contains the production's kernel memory.
The situation described above caused spontaneous kdump failures/hangs
on systems where the Secure IPL is activated because on such systems
an IPL report is always present. In that case kdump's decompressor tried
to parse an IPL report which frequently lead to illegal memory accesses
because an IPL report contains addresses to various data.
Cc: <stable@vger.kernel.org> Fixes: 99feaa717e55 ("s390/kexec_file: Create ipl report and pass to next kernel") Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
$ gcc -Wall -Wextra -o test file1.c file2.c
$ perf record -e intel_pt//u --filter 'filter func @ ./test' -- ./test
Multiple symbols with name 'func'
#1 0x1149 l func
which is near main
#2 0x1179 l func
which is near other
Disambiguate symbol name by inserting #n after the name e.g. func #2
Or select a global symbol by inserting #0 or #g or #G
Failed to parse address filter: 'filter func @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
$ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
Failed to parse address filter: 'filter func #2 @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
Sphinx 6.0 removed the execfile_() function, which we use as part of the
configuration process. They *did* warn us... Just open-code the
functionality as is done in Sphinx itself.
Tested (using SPHINX_CONF, since this code is only executed with an
alternative config file) on various Sphinx versions from 2.5 through 6.0.
Reported-by: Martin Liška <mliska@suse.cz> Cc: stable@vger.kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan reports that recent kernels built with LTO will crash when doing
EFI boot using Fedora's GRUB and SHIM. The culprit turns out to be a
misaligned load from the TPM event log, which is annotated with
READ_ONCE(), and under LTO, this gets translated into a LDAR instruction
which does not tolerate misaligned accesses.
Interestingly, this does not happen when booting the same kernel
straight from the UEFI shell, and so the fact that the event log may
appear misaligned in memory may be caused by a bug in GRUB or SHIM.
However, using READ_ONCE() to access firmware tables is slightly unusual
in any case, and here, we only need to ensure that 'event' is not
dereferenced again after it gets unmapped, but this is already taken
care of by the implicit barrier() semantics of the early_memunmap()
call.
Cc: <stable@vger.kernel.org> Cc: Peter Jones <pjones@redhat.com> Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Reported-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Link: https://github.com/ClangBuiltLinux/linux/issues/1782 Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A recent development on the EFI front has resulted in guests having
their page tables baked in the firmware binary, and mapped into the
IPA space as part of a read-only memslot. Not only is this legitimate,
but it also results in added security, so thumbs up.
It is possible to take an S1PTW translation fault if the S1 PTs are
unmapped at stage-2. However, KVM unconditionally treats S1PTW as a
write to correctly handle hardware AF/DB updates to the S1 PTs.
Furthermore, KVM injects an exception into the guest for S1PTW writes.
In the aforementioned case this results in the guest taking an abort
it won't recover from, as the S1 PTs mapping the vectors suffer from
the same problem.
So clearly our handling is... wrong.
Instead, switch to a two-pronged approach:
- On S1PTW translation fault, handle the fault as a read
- On S1PTW permission fault, handle the fault as a write
This is of no consequence to SW that *writes* to its PTs (the write
will trigger a non-S1PTW fault), and SW that uses RO PTs will not
use HW-assisted AF/DB anyway, as that'd be wrong.
Only in the case described in c4ad98e4b72c ("KVM: arm64: Assume write
fault on S1PTW permission fault on instruction fetch") do we end-up
with two back-to-back faults (page being evicted and faulted back).
I don't think this is a case worth optimising for.
Fixes: c4ad98e4b72c ("KVM: arm64: Assume write fault on S1PTW permission fault on instruction fetch") Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Regression-tested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The HP Spectre x360 13-aw0xxx devices use the ALC285 codec with GPIO 0x04
controlling the micmute LED and COEF 0x0b index 8 controlling the mute LED.
A quirk was added to make these work as well as a fixup.
If the offset + length goes over the ethernet + vlan header, then the
length is adjusted to copy the bytes that are within the boundaries of
the vlan_ethhdr scratchpad area. The remaining bytes beyond ethernet +
vlan header are copied directly from the skbuff data area.
Fix incorrect arithmetic operator: subtract, not add, the size of the
vlan header in case of double-tagged packets to adjust the length
accordingly to address CVE-2023-0179.
There is another Dell Latitude laptop (1028:0c03) with Realtek
codec ALC3254 which needs the ALC269_FIXUP_DELL4_MIC_NO_PRESENCE
instead of the default matched ALC269_FIXUP_DELL1_MIC_NO_PRESENCE.
Apply correct fixup for this particular model to enable headset mic.
Clement Lecigne [Fri, 13 Jan 2023 12:07:45 +0000 (13:07 +0100)]
ALSA: pcm: Move rwsem lock inside snd_ctl_elem_read to prevent UAF
[ Note: this is a fix that works around the bug equivalently as the
two upstream commits: 1fa4445f9adf ("ALSA: control - introduce snd_ctl_notify_one() helper") 56b88b50565c ("ALSA: pcm: Move rwsem lock inside snd_ctl_elem_read to prevent UAF")
but in a simpler way to fit with older stable trees -- tiwai ]
Add missing locking in ctl_elem_read_user/ctl_elem_write_user which can be
easily triggered and turned into an use-after-free.
Example code paths with SNDRV_CTL_IOCTL_ELEM_READ:
While experimenting with applying noqueue to a classful queue discipline,
we discovered a NULL pointer dereference in the __dev_queue_xmit()
path that generates a kernel OOPS:
Previously in commit d66d6c3152e8 ("net: sched: register noqueue
qdisc"), NULL was set for the noqueue discipline on noqueue init
so that __dev_queue_xmit() falls through for the noqueue case. This
also sets a bypass of the enqueue NULL check in the
register_qdisc() function for the struct noqueue_disc_ops.
Classful queue disciplines make it past the NULL check in
__dev_queue_xmit() because the discipline is set to htb (in this case),
and then in the call to __dev_xmit_skb(), it calls into htb_enqueue()
which grabs a leaf node for a class and then calls qdisc_enqueue() by
passing in a queue discipline which assumes ->enqueue() is not set to NULL.
Fix this by not allowing classes to be assigned to the noqueue
discipline. Linux TC Notes states that classes cannot be set to
the noqueue discipline. [1] Let's enforce that here.
Before, only the destructor from TCP request sock in IPv4 was called
even if the subflow was IPv6.
It is important to use the right destructor to avoid memory leaks with
some advanced IPv6 features, e.g. when the request socks contain
specific IPv6 options.
Fixes: 79c0949e9a09 ("mptcp: Add key generation and token tree") Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Cc: stable@vger.kernel.org # 5.10 Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tcp_request_sock_ops structure is specific to IPv4. It should then not
be used with MPTCP subflows on top of IPv6.
For example, it contains the 'family' field, initialised to AF_INET.
This 'family' field is used by TCP FastOpen code to generate the cookie
but also by TCP Metrics, SELinux and SYN Cookies. Using the wrong family
will not lead to crashes but displaying/using/checking wrong things.
Note that 'send_reset' callback from request_sock_ops structure is used
in some error paths. It is then also important to use the correct one
for IPv4 or IPv6.
The slab name can also be different in IPv4 and IPv6, it will be used
when printing some log messages. The slab pointer will anyway be the
same because the object size is the same for both v4 and v6. A
BUILD_BUG_ON() has also been added to make sure this size is the same.
Fixes: cec37a6e41aa ("mptcp: Handle MP_CAPABLE options for outgoing connections") Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Cc: stable@vger.kernel.org # 5.10 Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To ease the maintenance, it is often recommended to avoid having #ifdef
preprocessor conditions.
Here the section related to CONFIG_MPTCP was quite short but the next
commit needs to add more code around. It is then cleaner to move
specific MPTCP code to functions located in net/mptcp directory.
Now that mptcp_subflow_request_sock_ops structure can be static, it can
also be marked as "read only after init".
Suggested-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Cc: stable@vger.kernel.org # 5.10 Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rasmus Villemoes [Fri, 23 Dec 2022 04:23:54 +0000 (13:23 +0900)]
serial: fixup backport of "serial: Deassert Transmit Enable on probe in driver-specific way"
When 7c7f9bc986e6 ("serial: Deassert Transmit Enable on probe in
driver-specific way") got backported to 5.10.y, there known as 26a2b9c468de, some hunks were accidentally left out.
In serial_core.c, it is possible that the omission in
uart_suspend_port() is harmless, but the backport did have the
corresponding hunk in uart_resume_port(), it runs counter to the
original commit's intention of
Skip any invocation of ->set_mctrl() if RS485 is enabled.
and it's certainly better to be aligned with upstream.
Link: https://lkml.kernel.org/r/20221222114414.1886632-1-linux@rasmusvillemoes.dk Fixes: 26a2b9c468de ("serial: Deassert Transmit Enable on probe in driver-specific way") Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
[the fsl_lpuart part of the 5.15 patch is not required on 5.10,
because the code before 26a2b9c468de was incorrectly not calling
uart_remove_one_port on failed_get_rs485] Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit a80f7fcf1867 ("ext4: fixup ext4_fc_track_* functions' signature")
extended the scope of the transaction in ext4_unlink() too far, making
it include the call to ext4_find_entry(). However, ext4_find_entry()
can deadlock when called from within a transaction because it may need
to set up the directory's encryption key.
Fix this by restoring the transaction to its original scope.
fast-commit of create, link, and unlink operations in encrypted
directories is completely broken because the unencrypted filenames are
being written to the fast-commit journal instead of the encrypted
filenames. These operations can't be replayed, as encryption keys
aren't present at journal replay time. It is also an information leak.
Until if/when we can get this working properly, make encrypted directory
operations ineligible for fast-commit.
Note that fast-commit operations on encrypted regular files continue to
be allowed, as they seem to work.
Adjust some MADV_XXX constants to be in sync what their values are on
all other platforms. There is currently no reason to have an own
numbering on parisc, but it requires workarounds in many userspace
sources (e.g. glibc, qemu, ...) - which are often forgotten and thus
introduce bugs and different behaviour on parisc.
A wrapper avoids an ABI breakage for existing userspace applications by
translating any old values to the new ones, so this change allows us to
move over all programs to the new ABI over time.
Instead of blindly creating the EFI random seed configuration table if
the RNG protocol is implemented and works, check whether such a EFI
configuration table was provided by an earlier boot stage and if so,
concatenate the existing and the new seeds, leaving it up to the core
code to mix it in and credit it the way it sees fit.
This can be used for, e.g., systemd-boot, to pass an additional seed to
Linux in a way that can be consumed by the kernel very early. In that
case, the following definitions should be used to pass the seed to the
EFI stub:
struct linux_efi_random_seed {
u32 size; // of the 'seed' array in bytes
u8 seed[];
};
The memory for the struct must be allocated as EFI_ACPI_RECLAIM_MEMORY
pool memory, and the address of the struct in memory should be installed
as a EFI configuration table using the following GUID:
Note that doing so is safe even on kernels that were built without this
patch applied, but the seed will simply be overwritten with a seed
derived from the EFI RNG protocol, if available. The recommended seed
size is 32 bytes, and seeds larger than 512 bytes are considered
corrupted and ignored entirely.
In order to preserve forward secrecy, seeds from previous bootloaders
are memzero'd out, and in order to preserve memory, those older seeds
are also freed from memory. Freeing from memory without first memzeroing
is not safe to do, as it's possible that nothing else will ever
overwrite those pages used by EFI.
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
[ardb: incorporate Jason's followup changes to extend the maximum seed
size on the consumer end, memzero() it and drop a needless printk] Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 307af6c87937 ("mbcache: automatically delete entries from cache
on freeing") started nesting cache->c_list_lock under the bit locks
protecting hash buckets of the mbcache hash table in
mb_cache_entry_create(). This causes problems for real-time kernels
because there spinlocks are sleeping locks while bitlocks stay atomic.
Luckily the nesting is easy to avoid by holding entry reference until
the entry is added to the LRU list. This makes sure we cannot race with
entry deletion.
Cc: stable@kernel.org Fixes: 307af6c87937 ("mbcache: automatically delete entries from cache on freeing") Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220908091032.10513-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 55d1cbbbb29e ("hfs/hfsplus: use WARN_ON for sanity check") fixed
a build warning by turning a comment into a WARN_ON(), but it turns out
that syzbot then complains because it can trigger said warning with a
corrupted hfs image.
The warning actually does warn about a bad situation, but we are much
better off just handling it as the error it is. So rather than warn
about us doing bad things, stop doing the bad things and return -EIO.
While at it, also fix a memory leak that was introduced by an earlier
fix for a similar syzbot warning situation, and add a check for one case
that historically wasn't handled at all (ie neither comment nor
subsequent WARN_ON).
Reported-by: syzbot+7bb7cd3595533513a9e7@syzkaller.appspotmail.com Fixes: 55d1cbbbb29e ("hfs/hfsplus: use WARN_ON for sanity check") Fixes: 8d824e69d9f3 ("hfs: fix OOB Read in __hfs_brec_find") Link: https://lore.kernel.org/lkml/000000000000dbce4e05f170f289@google.com/ Tested-by: Michael Schmitz <schmitzmic@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Viacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gcc warns about a couple of instances in which a sanity check exists but
the author wasn't sure how to react to it failing, which makes it look
like a possible bug:
fs/hfsplus/inode.c: In function 'hfsplus_cat_read_inode':
fs/hfsplus/inode.c:503:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
503 | /* panic? */;
| ^
fs/hfsplus/inode.c:524:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
524 | /* panic? */;
| ^
fs/hfsplus/inode.c: In function 'hfsplus_cat_write_inode':
fs/hfsplus/inode.c:582:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
582 | /* panic? */;
| ^
fs/hfsplus/inode.c:608:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
608 | /* panic? */;
| ^
fs/hfs/inode.c: In function 'hfs_write_inode':
fs/hfs/inode.c:464:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
464 | /* panic? */;
| ^
fs/hfs/inode.c:485:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
485 | /* panic? */;
| ^
panic() is probably not the correct choice here, but a WARN_ON
seems appropriate and avoids the compile-time warning.
Link: https://lkml.kernel.org/r/20210927102149.1809384-1-arnd@kernel.org Link: https://lore.kernel.org/all/20210322223249.2632268-1-arnd@kernel.org/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The build of kselftests fails if relative path is specified through
KBUILD_OUTPUT or O=<path> method. BUILD variable is used to determine
the path of the output objects. When make is run from other directories
with relative paths, the exact path of the build objects is ambiguous
and build fails.
Set the BUILD variable to the absolute path of the output directory.
Make the logic readable and easy to follow. Use spaces instead of tabs
for indentation as if with tab indentation is considered recipe in make.
Mounting a filesystem whose journal inode has the encrypt flag causes a
NULL dereference in fscrypt_limit_io_blocks() when the 'inlinecrypt'
mount option is used.
The problem is that when jbd2_journal_init_inode() calls bmap(), it
eventually finds its way into ext4_iomap_begin(), which calls
fscrypt_limit_io_blocks(). fscrypt_limit_io_blocks() requires that if
the inode is encrypted, then its encryption key must already be set up.
That's not the case here, since the journal inode is never "opened" like
a normal file would be. Hence the crash.
To fix this, make ext4 consider journal inodes with the encrypt flag to
be invalid. (Note, maybe other flags should be rejected on the journal
inode too. For now, this is just the minimal fix for the above issue.)
I've marked this as fixing the commit that introduced the call to
fscrypt_limit_io_blocks(), since that's what made an actual crash start
being possible. But this fix could be applied to any version of ext4
that supports the encrypt feature.
Reported-by: syzbot+ba9dac45bc76c490b7c3@syzkaller.appspotmail.com Fixes: 38ea50daa7a4 ("ext4: support direct I/O with fscrypt using blk-crypto") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20221102053312.189962-1-ebiggers@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check carefully on root debugfs available when destroying vgpu,
e.g in remove case drm minor's debugfs root might already be destroyed,
which led to kernel oops like below.
When gvt debug fs is destroyed, need to have a sane check if drm
minor's debugfs root is still available or not, otherwise in case like
device remove through unbinding, drm minor's debugfs directory has
already been removed, then intel_gvt_debugfs_clean() would act upon
dangling pointer like below oops.
If the get_user(x, ptr) has x as a pointer, then the setting
of (x) = 0 is going to produce the following sparse warning,
so fix this by forcing the type of 'x' when access_ok() fails.
fs/aio.c:2073:21: warning: Using plain integer as NULL pointer
Commit 62d89a7d49af ("video: fbdev: matroxfb: set maxvram of vbG200eW to
the same as vbG200 to avoid black screen") accidently decreases the
maximum memory size for the Matrox G200eW (102b:0532) from 8 MB to 1 MB
by missing one zero. This caused the driver initialization to fail with
the messages below, as the minimum required VRAM size is 2 MB:
So, add the missing 0 to make it the intended 16 MB. Successfully tested on
the Dell PowerEdge R910/0KYD3D, BIOS 2.10.0 08/29/2013, that the warning is
gone.
While at it, add a leading 0 to the maxdisplayable entry, so it’s aligned
properly. The value could probably also be increased from 8 MB to 16 MB, as
the G200 uses the same values, but I have not checked any datasheet.
Note, matroxfb is obsolete and superseded by the maintained DRM driver
mga200, which is used by default on most systems where both drivers are
available. Therefore, on most systems it was only a cosmetic issue.
Fixes: 62d89a7d49af ("video: fbdev: matroxfb: set maxvram of vbG200eW to the same as vbG200 to avoid black screen") Link: https://lore.kernel.org/linux-fbdev/972999d3-b75d-5680-fcef-6e6905c52ac5@suse.de/T/#mb6953a9995ebd18acc8552f99d6db39787aec775 Cc: it+linux-fbdev@molgen.mpg.de Cc: Z. Liu <liuzx@knownsec.com> Cc: Rich Felker <dalias@libc.org> Cc: stable@vger.kernel.org Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If v4 READDIR operation hits a mountpoint and gets back an error,
then it will include that entry in the reply and set RDATTR_ERROR for it
to the error.
That's fine for "normal" exported filesystems, but on the v4root, we
need to be more careful to only expose the existence of dentries that
lead to exports.
If the mountd upcall times out while checking to see whether a
mountpoint on the v4root is exported, then we have no recourse other
than to fail the whole operation.
Cc: Steve Dickson <steved@redhat.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216777 Reported-by: JianHong Yin <yin-jianhong@163.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The flush request initialized by blk_kick_flush has NULL bio,
and it may be dealt with nvme_end_req during io completion.
When blktrace is enabled, nvme_trace_bio_complete with multipath
activated trying to access NULL pointer bio from flush request
results in the following crash:
The Advantech MICA-071 tablet deviates from the defaults for
a non CR Bay Trail based tablet in several ways:
1. It uses an analog MIC on IN3 rather then using DMIC1
2. It only has 1 speaker
3. It needs the OVCD current threshold to be set to 1500uA instead of
the default 2000uA to reliable differentiate between headphones vs
headsets
Add a quirk with these settings for this tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20221213123246.11226-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When extending the last extent in the file within the last block, we
wrongly computed the length of the last extent. This is mostly a
cosmetical problem since the extent does not contain any data and the
length will be fixed up by following operations but still.
Fixes: 1f3868f06855 ("udf: Fix extending file within last block") Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
Variables off and len typed as uint32 in rndis_query function
are controlled by incoming RNDIS response message thus their
value may be manipulated. Setting off to a unexpectetly large
value will cause the sum with len and 8 to overflow and pass
the implemented validation step. Consequently the response
pointer will be referring to a location past the expected
buffer boundaries allowing information leakage e.g. via
RNDIS_OID_802_3_PERMANENT_ADDRESS OID.
Fixes: ddda08624013 ("USB: rndis_host, various cleanups") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / linux-stable / log