This is caused by a race between two concurrenct md_ioctl()s closing
the array.
CPU1 (md_ioctl()) CPU2 (md_ioctl())
------ ------
set_bit(MD_CLOSING, &mddev->flags);
did_set_md_closing = true;
WARN_ON_ONCE(test_bit(MD_CLOSING,
&mddev->flags));
if(did_set_md_closing)
clear_bit(MD_CLOSING, &mddev->flags);
Fix the warning by returning immediately if the MD_CLOSING bit is set
in &mddev->flags which indicates that the array is being closed.
Fixes: 065e519e71b2 ("md: MD_CLOSING needs to be cleared after called md_set_readonly or do_md_stop") Reported-by: syzbot+1e46a0864c1a6e9bd3d8@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Dae R. Jeong <dae.r.jeong@kaist.ac.kr> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot discovered a bug in which an OOB access was being made because
an unsuitable key_idx value was wrongly considered to be acceptable
while deleting a key in nl80211_del_key().
Since we don't know the cipher at the time of deletion, if
cfg80211_validate_key_settings() were to be called directly in
nl80211_del_key(), even valid keys would be wrongly determined invalid,
and deletion wouldn't occur correctly.
For this reason, a new function - cfg80211_valid_key_idx(), has been
created, to determine if the key_idx value provided is valid or not.
cfg80211_valid_key_idx() is directly called in 2 places -
nl80211_del_key(), and cfg80211_validate_key_settings().
Reported-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com Tested-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Link: https://lore.kernel.org/r/20201204215825.129879-1-anant.thazhemadam@gmail.com Cc: stable@vger.kernel.org
[also disallow IGTK key IDs if no IGTK cipher is supported] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 3f69cc60768b ("crypto: af_alg - Allow arbitrarily long algorithm
names") made the kernel start accepting arbitrarily long algorithm names
in sockaddr_alg. However, the actual length of the salg_name field
stayed at the original 64 bytes.
This is broken because the kernel can access indices >= 64 in salg_name,
which is undefined behavior -- even though the memory that is accessed
is still located within the sockaddr structure. It would only be
defined behavior if the array were properly marked as arbitrary-length
(either by making it a flexible array, which is the recommended way
these days, or by making it an array of length 0 or 1).
We can't simply change salg_name into a flexible array, since that would
break source compatibility with userspace programs that embed
sockaddr_alg into another struct, or (more commonly) declare a
sockaddr_alg like 'struct sockaddr_alg sa = { .salg_name = "foo" };'.
One solution would be to change salg_name into a flexible array only
when '#ifdef __KERNEL__'. However, that would keep userspace without an
easy way to actually use the longer algorithm names.
Instead, add a new structure 'sockaddr_alg_new' that has the flexible
array field, and expose it to both userspace and the kernel.
Make the kernel use it correctly in alg_bind().
This addresses the syzbot report
"UBSAN: array-index-out-of-bounds in alg_bind"
(https://syzkaller.appspot.com/bug?extid=92ead4eb8e26a26d465e).
Reported-by: syzbot+92ead4eb8e26a26d465e@syzkaller.appspotmail.com Fixes: 3f69cc60768b ("crypto: af_alg - Allow arbitrarily long algorithm names") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When dquot_resume() was last updated, the argument that got passed
to vfs_cleanup_quota_inode was incorrectly set.
If type = -1 and dquot_load_quota_sb() returns a negative value,
then vfs_cleanup_quota_inode() gets called with -1 passed as an
argument, and this leads to an array-index-out-of-bounds bug.
Fix this issue by correctly passing the arguments.
`num_reports` is not being properly checked. A malformed event packet with
a large `num_reports` number makes hci_le_direct_adv_report_evt() read out
of bounds. Fix it.
Cc: stable@vger.kernel.org Fixes: 2f010b55884e ("Bluetooth: Add support for handling LE Direct Advertising Report events") Reported-and-tested-by: syzbot+24ebd650e20bd263ca01@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=24ebd650e20bd263ca01 Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As described in "fscrypt: add fscrypt_is_nokey_name()", it's possible to
create a duplicate filename in an encrypted directory by creating a file
concurrently with adding the directory's encryption key.
Fix this bug on f2fs by rejecting no-key dentries in f2fs_add_link().
Note that the weird check for the current task in f2fs_do_add_link()
seems to make this bug difficult to reproduce on f2fs.
As described in "fscrypt: add fscrypt_is_nokey_name()", it's possible to
create a duplicate filename in an encrypted directory by creating a file
concurrently with adding the directory's encryption key.
Fix this bug on ext4 by rejecting no-key dentries in ext4_add_entry().
Note that the duplicate check in ext4_find_dest_de() sometimes prevented
this bug. However in many cases it didn't, since ext4_find_dest_de()
doesn't examine every dentry.
As described in "fscrypt: add fscrypt_is_nokey_name()", it's possible to
create a duplicate filename in an encrypted directory by creating a file
concurrently with adding the directory's encryption key.
Fix this bug on ubifs by rejecting no-key dentries in ubifs_create(),
ubifs_mkdir(), ubifs_mknod(), and ubifs_symlink().
Note that ubifs doesn't actually report the duplicate filenames from
readdir, but rather it seems to replace the original dentry with a new
one (which is still wrong, just a different effect from ext4).
On ubifs, this fixes xfstest generic/595 as well as the new xfstest I
wrote specifically for this bug.
It's possible to create a duplicate filename in an encrypted directory
by creating a file concurrently with adding the encryption key.
Specifically, sys_open(O_CREAT) (or sys_mkdir(), sys_mknod(), or
sys_symlink()) can lookup the target filename while the directory's
encryption key hasn't been added yet, resulting in a negative no-key
dentry. The VFS then calls ->create() (or ->mkdir(), ->mknod(), or
->symlink()) because the dentry is negative. Normally, ->create() would
return -ENOKEY due to the directory's key being unavailable. However,
if the key was added between the dentry lookup and ->create(), then the
filesystem will go ahead and try to create the file.
If the target filename happens to already exist as a normal name (not a
no-key name), a duplicate filename may be added to the directory.
In order to fix this, we need to fix the filesystems to prevent
->create(), ->mkdir(), ->mknod(), and ->symlink() on no-key names.
(->rename() and ->link() need it too, but those are already handled
correctly by fscrypt_prepare_rename() and fscrypt_prepare_link().)
In preparation for this, add a helper function fscrypt_is_nokey_name()
that filesystems can use to do this check. Use this helper function for
the existing checks that fs/crypto/ does for rename and link.
There isn't really any valid reason to use __FSCRYPT_MODE_MAX or
FSCRYPT_POLICY_FLAGS_VALID in a userspace program. These constants are
only meant to be used by the kernel internally, and they are defined in
the UAPI header next to the mode numbers and flags only so that kernel
developers don't forget to update them when adding new modes or flags.
In https://lkml.kernel.org/r/20201005074133.1958633-2-satyat@google.com
there was an example of someone wanting to use __FSCRYPT_MODE_MAX in a
user program, and it was wrong because the program would have broken if
__FSCRYPT_MODE_MAX were ever increased. So having this definition
available is harmful. FSCRYPT_POLICY_FLAGS_VALID has the same problem.
So, remove these definitions from the UAPI header. Replace
FSCRYPT_POLICY_FLAGS_VALID with just listing the valid flags explicitly
in the one kernel function that needs it. Move __FSCRYPT_MODE_MAX to
fscrypt_private.h, remove the double underscores (which were only
present to discourage use by userspace), and add a BUILD_BUG_ON() and
comments to (hopefully) ensure it is kept in sync.
Keep the old name FS_POLICY_FLAGS_VALID, since it's been around for
longer and there's a greater chance that removing it would break source
compatibility with some program. Indeed, mtd-utils is using it in
an #ifdef, and removing it would introduce compiler warnings (about
FS_POLICY_FLAGS_PAD_* being redefined) into the mtd-utils build.
However, reduce its value to 0x07 so that it only includes the flags
with old names (the ones present before Linux 5.4), and try to make it
clear that it's now "frozen" and no new flags should be added to it.
Fixes: 2336d0deb2d4 ("fscrypt: use FSCRYPT_ prefix for uapi constants") Cc: <stable@vger.kernel.org> # v5.4+ Link: https://lore.kernel.org/r/20201024005132.495952-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At the moment opening a serial device node (such as /dev/ttyS3)
succeeds even if there is no actual serial device behind it.
Reading/writing/ioctls fail as expected because the uart port is not
initialized (the type is PORT_UNKNOWN) and the TTY_IO_ERROR error state
bit is set fot the tty.
However setting line discipline does not have these checks
8250_port.c (8250 is the default choice made by univ8250_console_init()).
As the result of PORT_UNKNOWN, uart_port::iobase is NULL which
a platform translates onto some address accessing which produces a crash
like below.
This adds tty_port_initialized() to uart_set_ldisc() to prevent the crash.
It sounds unwise to let user space pass an unchecked 32-bit offset into a
kernel structure in an ioctl. This is an unsigned variable, so checking the
upper bound for the size of the structure it points into is sufficient to
avoid data corruption, but as the pointer might also be unaligned, it has
to be written carefully as well.
While I stumbled over this problem by reading the code, I did not continue
checking the function for further problems like it.
Link: https://lore.kernel.org/r/20201030164450.1253641-2-arnd@kernel.org Fixes: c4a3e0a529ab ("[SCSI] MegaRAID SAS RAID: new driver") Cc: <stable@vger.kernel.org> # v2.6.15+ Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Jia Yang <jiayang5@huawei.com> Fixes: da52f8ade40b ("f2fs: get the right gc victim section when section has several segments") Cc: <stable@vger.kernel.org> Signed-off-by: Jack Qiu <jack.qiu@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
llseek() reports invalid block address access, the root cause is if
file has inline data, f2fs_seek_block() will access inline data regard
as block address index in inode block, which should be wrong, fix it.
There is a bug on the systems supporting to skip power up
(qcom,skip-power-up) where setting LPOVERRIDE bit(low-power
state override behaviour) will result in CPU hangs/lockups
even on the implementations which supports it. So skip
setting the LPOVERRIDE bit for such platforms.
Fixes: 02510a5aa78d ("coresight: etm4x: Add support to skip trace unit power up") Cc: stable@vger.kernel.org Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20201127175256.1092685-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There was a report of NULL pointer dereference in ETF enable
path for perf CS mode with PID monitoring. It is almost 100%
reproducible when the process to monitor is something very
active such as chrome and with ETF as the sink, not ETR.
But code path shows that ETB has a similar path as ETF, so
there could be possible NULL pointer dereference crash in
ETB as well. Currently in a bid to find the pid, the owner
is dereferenced via task_pid_nr() call in etb_enable_perf()
and with owner being NULL, we can get a NULL pointer
dereference, so have a similar fix as ETF where we cache PID
in alloc_buffer() callback which is called as the part of
etm_setup_aux().
Fixes: 75d7dbd38824 ("coresight: etb10: Add support for CPU-wide trace scenarios") Cc: stable@vger.kernel.org Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20201127175256.1092685-11-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the ETR is used in perf mode with a larger buffer (configured
via sysfs or the default size of 1M) than the perf aux buffer size,
we end up inserting the barrier packet at the wrong offset, while
moving the offset forward. i.e, instead of the "new moved offset",
we insert it at the current hardware buffer offset. These packets
will not be visible as they are never copied and could lead to
corruption in the trace decoding side, as the decoder is not aware
that it needs to reset the decoding.
Fixes: ec13c78d7b45 ("coresight: tmc-etr: Add barrier packets when moving offset forward") Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: stable@vger.kernel.org Reported-by: Al Grant <al.grant@arm.com> Tested-by: Mike Leach <mike.leach@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20201208182651.1597945-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
alloc_pages_node() return should be checked before calling
dma_map_page() to make sure that valid page is mapped or
else it can lead to aborts as below:
Unable to handle kernel paging request at virtual address ffffffc008000000
Mem abort info:
<snip>...
pc : __dma_inv_area+0x40/0x58
lr : dma_direct_map_page+0xd8/0x1c8
There was a report of NULL pointer dereference in ETF enable
path for perf CS mode with PID monitoring. It is almost 100%
reproducible when the process to monitor is something very
active such as chrome and with ETF as the sink and not ETR.
Currently in a bid to find the pid, the owner is dereferenced
via task_pid_nr() call in tmc_enable_etf_sink_perf() and with
owner being NULL, we get a NULL pointer dereference.
Looking at the ETR and other places in the kernel, ETF and the
ETB are the only places trying to dereference the task(owner)
in tmc_enable_etf_sink_perf() which is also called from the
sched_in path as in the call trace. Owner(task) is NULL even
in the case of ETR in tmc_enable_etr_sink_perf(), but since we
cache the PID in alloc_buffer() callback and it is done as part
of etm_setup_aux() when allocating buffer for ETR sink, we never
dereference this NULL pointer and we are safe. So lets do the
same thing with ETF and cache the PID to which the cs_buffer
belongs in tmc_alloc_etf_buffer() as done for ETR. This will
also remove the unnecessary function calls(task_pid_nr()) since
we are caching the PID.
Easily reproducible running below:
perf record -e cs_etm/@tmc_etf0/ -N -p <pid>
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000548
Mem abort info:
ESR = 0x96000006
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
<snip>...
Call trace:
tmc_enable_etf_sink+0xe4/0x280
coresight_enable_path+0x168/0x1fc
etm_event_start+0x8c/0xf8
etm_event_add+0x38/0x54
event_sched_in+0x194/0x2ac
group_sched_in+0x54/0x12c
flexible_sched_in+0xd8/0x120
visit_groups_merge+0x100/0x16c
ctx_flexible_sched_in+0x50/0x74
ctx_sched_in+0xa4/0xa8
perf_event_sched_in+0x60/0x6c
perf_event_context_sched_in+0x98/0xe0
__perf_event_task_sched_in+0x5c/0xd8
finish_task_switch+0x184/0x1cc
schedule_tail+0x20/0xec
ret_from_fork+0x4/0x18
Fixes: 880af782c6e8 ("coresight: tmc-etf: Add support for CPU-wide trace scenarios") Cc: stable@vger.kernel.org Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20201127175256.1092685-10-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On Odroid XU LDO12 and LDO15 supplies the power to USB 3.0 blocks but
the GPK GPIO pins are supplied by LDO7 (VDDQ_LCD). LDO7 also supplies
GPJ GPIO pins.
The Exynos pinctrl driver does not take any supplies, so to have entire
GPIO block always available, make the regulator always on.
Fixes: 88644b4c750b ("ARM: dts: exynos: Configure PWM, usb3503, PMIC and thermal on Odroid XU board") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201015182044.480562-3-krzk@kernel.org Tested-by: Gabriel Ribba Esteva <gabriel.ribbae@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The VBUS control (PWREN) and over-current pins of USB 3.0 DWC3
controllers are on Exynos5410 regular GPIOs. This is different than for
example on Exynos5422 where these are special ETC pins with proper reset
values (pulls, functions).
Therefore these pins should be configured to enable proper USB 3.0
peripheral and host modes. This also fixes over-current warning:
[ 6.024658] usb usb4-port1: over-current condition
[ 6.028271] usb usb3-port1: over-current condition
Fixes: cb0896562228 ("ARM: dts: exynos: Add USB to Exynos5410") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201015182044.480562-2-krzk@kernel.org Tested-by: Gabriel Ribba Esteva <gabriel.ribbae@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On Odroid XU board the USB3-0 port is a microUSB and USB3-1 port is USB
type A (host). The roles were copied from Odroid XU3 (Exynos5422)
design which has it reversed.
Fixes: 8149afe4dbf9 ("ARM: dts: exynos: Add initial support for Odroid XU board") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201015182044.480562-1-krzk@kernel.org Tested-by: Gabriel Ribba Esteva <gabriel.ribbae@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Align the SuperSpeed Plus bitrate for f_rndis to match f_ncm's ncm_bitrate
defined by commit 1650113888fe ("usb: gadget: f_ncm: add SuperSpeed descriptors
for CDC NCM").
Cc: Felipe Balbi <balbi@kernel.org> Cc: EJ Hsu <ejh@nvidia.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Will McVicker <willmcvicker@google.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20201127140559.381351-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In many cases a function that supports SuperSpeed can very well
operate in SuperSpeedPlus, if a gadget controller supports it,
as the endpoint descriptors (and companion descriptors) are
generally identical and can be re-used. This is true for two
commonly used functions: Android's ADB and MTP. So we can simply
assign the usb_function's ssp_descriptors array to point to its
ss_descriptors, if available. Similarly, we need to allow an
epfile's ioctl for FUNCTIONFS_ENDPOINT_DESC to correctly
return the corresponding SuperSpeed endpoint descriptor in case
the connected speed is SuperSpeedPlus as well.
The only exception is if a function wants to implement an
Isochronous endpoint capable of transferring more than 48KB per
service interval when operating at greater than USB 3.1 Gen1
speed, in which case it would require an additional SuperSpeedPlus
Isochronous Endpoint Companion descriptor to be returned as part
of the Configuration Descriptor. Support for that would need
to be separately added to the userspace-facing FunctionFS API
which may not be a trivial task--likely a new descriptor format
(v3?) may need to be devised to allow for separate SS and SSP
descriptors to be supplied.
Add an interface-number sanity check before testing the device flags to
avoid relying on undefined behaviour when left shifting in case a device
uses an interface number greater than or equal to BITS_PER_LONG (i.e. 64
or 32).
This code is using the wrong sizeof() so it does not allocate enough
memory. It allocates 32 bytes but 72 are required. That will lead to
memory corruption.
When a split lock is detected always make sure to disable interrupts
before returning from the trap handler.
The kernel exit code assumes that all exits run with interrupts
disabled, otherwise the SWAPGS sequence can race against interrupts and
cause recursing page faults and later panics.
The problem will only happen on CPUs with split lock disable
functionality, so Icelake Server, Tiger Lake, Snow Ridge, Jacobsville.
Fixes: ca4c6a9858c2 ("x86/traps: Make interrupt enable/disable symmetric in C code") Fixes: bce9b042ec73 ("x86/traps: Disable interrupts in exc_aligment_check()") # v5.8+ Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When dumping the name and NTP servers advertised by DHCP, a blank line
is emitted if either of the lists is empty. This can lead to confusing
issues such as the blank line getting flagged as warning. This happens
because the blank line is the result of pr_cont("\n") and that may see
its level corrupted by some other driver concurrently writing to the
console.
Fix this by making sure that the terminating newline is only emitted
if at least one entry in the lists was printed before.
It has been observed that once per 300-1300 port openings the first
transmitted byte is being corrupted on AM3352 ("v" written to FIFO appeared
as "e" on the wire). It only happened if single byte has been transmitted
right after port open, which means, DMA is not used for this transfer and
the corruption never happened afterwards.
Therefore I've carefully re-read the MDR1 errata (link below), which says
"when accessing the MDR1 registers that causes a dummy under-run condition
that will freeze the UART in IrDA transmission. In UART mode, this may
corrupt the transferred data". Strictly speaking,
omap_8250_mdr1_errataset() performs a read access and if the value is the
same as should be written, exits without errata-recommended FIFO reset.
A brief check of the serial_omap_mdr1_errataset() from the competing
omap-serial driver showed it has no read access of MDR1. After removing the
read access from omap_8250_mdr1_errataset() the data corruption never
happened any more.
syzbot spotted a potential out-of-bounds shift in the PCM OSS layer
where it calculates the buffer size with the arbitrary shift value
given via an ioctl.
Add a range check for avoiding the undefined behavior.
As the value can be treated by a signed integer, the max shift should
be 30.
The console part of sisusbvga is broken vs. printk(). It uses in_atomic()
to detect contexts in which it cannot sleep despite the big fat comment in
preempt.h which says: Do not use in_atomic() in driver code.
in_atomic() does not work on kernels with CONFIG_PREEMPT_COUNT=n which
means that spin/rw_lock held regions are not detected by it.
There is no way to make this work by handing context information through to
the driver and this only can be solved once the core printk infrastructure
supports sleepable console drivers.
UAS does not share the pessimistic assumption storage is making that
devices cannot deal with WRITE_SAME. A few devices supported by UAS,
are reported to not deal well with WRITE_SAME. Those need a quirk.
Add it to the device that needs it.
Reported-by: David C. Partridge <david.partridge@perdrix.co.uk> Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201209152639.9195-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Intel Maple Ridge is successor of Titan Ridge Thunderbolt controller. As
Titan Ridge this one also includes xHCI host controller. In order to
safe energy we should put it to low power state by default when idle.
For this reason allow host runtime PM for Maple Ridge.
The xHCI controller on Alpine Ridge LP keeps the whole Thunderbolt
controller awake if the host controller is not allowed to sleep.
This is the case even if no USB devices are connected to the host.
Add the Intel Alpine Ridge LP product-id to the list of product-ids
for which we allow runtime PM by default.
Fixes: 2815ef7fe4d4 ("xhci-pci: allow host runtime PM as default for Intel Alpine and Titan Ridge") Cc: <stable@vger.kernel.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20201208092912.1773650-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit uses the private data passed by parent device
to set the quirk for Synopsys xHC. This patch fixes the
SNPS xHC hang issue when the data is scattered across
small buffers which does not make atleast MPS size for
given TRB cache size of SNPS xHC.
If a USB2 device wakeup is not enabled/supported the link state may
still be in U0 in xhci_bus_suspend(), where it's then manually put
to suspended U3 state.
Just as with selective suspend the device needs time to enter U3
suspend before continuing with further suspend operations
(e.g. system suspend), otherwise we may enter system suspend with link
state in U0.
The current channel-map control implementation in USB-audio driver may
lead to an error message like
"control 3:0:0:Playback Channel Map:0: access overflow"
when CONFIG_SND_CTL_VALIDATION is set. It's because the chmap get
callback clears the whole array no matter which count is set, and
rather the false-positive detection.
This patch fixes the problem by clearing only the needed array range
at usb_chmap_ctl_get().
Commit d9f0d82f06c6 ("USB: legousbtower: use usb_control_msg_recv()")
contained an elementary logical error. The check of the return code
from the new usb_control_msg_recv() function was inverted.
The logic for truncating the log file for emailing based on the
MAIL_MAX_SIZE option is confusing and incorrect. Simplify it and have the
tail of the log file truncated to the max size specified in the config.
Cc: stable@vger.kernel.org Fixes: 855d8abd2e8ff ("ktest.pl: Change the logic to control the size of the log file emailed") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the size of the error log is too big to send via email, and the sending
fails, it wont email any result. This can be confusing for the user who is
waiting for an email on the completion of the tests.
If it fails to send email, then try again without the log file stating that
it failed to send an email. Obviously this will not be of use if the sending
of email failed for some other reasons, but it will at least give the user
some information when it fails for the most common reason.
Cc: stable@vger.kernel.org Fixes: c2d84ddb338c8 ("ktest.pl: Add MAIL_COMMAND option to define how to send email") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ptrace_get_syscall_info() is potentially copying uninitialized stack
memory to userspace, since the compiler may leave a 3-byte hole near the
beginning of `info`. Fix it by adding a padding field to `struct
ptrace_syscall_info`.
Fixes: 201766a20e30 ("ptrace: add PTRACE_GET_SYSCALL_INFO request") Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Reviewed-by: Dmitry V. Levin <ldv@altlinux.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200801152044.230416-1-yepeilin.cs@gmail.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Dave Jones <davej@codemonkey.org.uk> Reported-by: Mike Snitzer <snitzer@redhat.com> Cc: Song Liu <songliubraving@fb.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 13 Dec 2020 19:31:19 +0000 (11:31 -0800)]
Merge tag 'x86-urgent-2020-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 and membarrier fixes:
- Correct a few problems in the x86 and the generic membarrier
implementation. Small corrections for assumptions about visibility
which have turned out not to be true.
- Make the PAT bits for memory encryption correct vs 4K and 2M/1G
page table entries as they are at a different location.
- Fix a concurrency issue in the the local bandwidth readout of
resource control leading to incorrect values
- Fix the ordering of allocating a vector for an interrupt. The order
missed to respect the provided cpumask when the first attempt of
allocating node local in the mask fails. It then tries the node
instead of trying the full provided mask first. This leads to
erroneous error messages and breaking the (user) supplied affinity
request. Reorder it.
- Make the INT3 padding detection in optprobe work correctly"
* tag 'x86-urgent-2020-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix optprobe to detect INT3 padding correctly
x86/apic/vector: Fix ordering in vector assignment
x86/resctrl: Fix incorrect local bandwidth when mba_sc is enabled
x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP
membarrier: Execute SYNC_CORE on the calling thread
membarrier: Explicitly sync remote cores when SYNC_CORE is requested
membarrier: Add an actual barrier before rseq_preempt()
x86/membarrier: Get rid of a dubious optimization
Linus Torvalds [Sun, 13 Dec 2020 18:36:23 +0000 (10:36 -0800)]
Merge tag 'block-5.10-2020-12-12' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"This should be it for 5.10.
Mike and Song looked into the warning case, and thankfully it appears
the fix was pretty trivial - we can just change the md device chunk
type to unsigned int to get rid of it. They cannot currently be < 0,
and nobody is checking for that either.
We're reverting the discard changes as the corruption reports came in
very late, and there's just no time to attempt to deal with it at this
point. Reverting the changes in question is the right call for 5.10"
* tag 'block-5.10-2020-12-12' of git://git.kernel.dk/linux-block:
md: change mddev 'chunk_sectors' from int to unsigned
Revert "md: add md_submit_discard_bio() for submitting discard bio"
Revert "md/raid10: extend r10bio devs to raid disks"
Revert "md/raid10: pull codes that wait for blocked dev into one function"
Revert "md/raid10: improve raid10 discard request"
Revert "md/raid10: improve discard request for far layout"
Revert "dm raid: remove unnecessary discard limits for raid10"
Linus Torvalds [Sat, 12 Dec 2020 20:57:12 +0000 (12:57 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Five small fixes. Four in drivers:
- hisi_sas: fix internal queue timeout
- be2iscsi: revert a prior fix causing problems
- bnx2i: add missing dependency
- storvsc: late arriving revert of a problem fix
and one in the core.
The core one is a minor change to stop paying attention to the busy
count when returning out of resources because there's a race window
where the queue might not restart due to missing returning I/O"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
Revert "scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()"
scsi: hisi_sas: Select a suitable queue for internal I/Os
scsi: core: Fix race between handling STS_RESOURCE and completion
scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()"
scsi: bnx2i: Requires MMU
Linus Torvalds [Sat, 12 Dec 2020 18:08:16 +0000 (10:08 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Bugfixes for ARM, x86 and tools"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
tools/kvm_stat: Exempt time-based counters
KVM: mmu: Fix SPTE encoding of MMIO generation upper half
kvm: x86/mmu: Use cpuid to determine max gfn
kvm: svm: de-allocate svm_cpu_data for all cpus in svm_cpu_uninit()
selftests: kvm/set_memory_region_test: Fix race in move region test
KVM: arm64: Add usage of stage 2 fault lookup level in user_mem_abort()
KVM: arm64: Fix handling of merging tables into a block entry
KVM: arm64: Fix memory leak on stage2 update of a valid PTE
Linus Torvalds [Sat, 12 Dec 2020 18:02:03 +0000 (10:02 -0800)]
Merge tag 'for-linus-5.10c-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"A short series fixing a regression introduced in 5.9 for running as
Xen dom0 on a system with NVMe backed storage"
* tag 'for-linus-5.10c-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: don't use page->lru for ZONE_DEVICE memory
xen: add helpers for caching grant mapping pages
Linus Torvalds [Sat, 12 Dec 2020 17:50:26 +0000 (09:50 -0800)]
Merge tag 'riscv-for-linus-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
"Just one fix. It's nothing critical, just a randconfig that wasn't
building. That said, it does seem pretty safe and is technically a
regression so I'm sending it along for 5.10:
- define get_cycles64() all the time, as it's used by most
configurations"
* tag 'riscv-for-linus-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Define get_cycles64() regardless of M-mode
Linus Torvalds [Sat, 12 Dec 2020 17:41:33 +0000 (09:41 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for cm109 stomping on its own control URB if it tries to toggle
buzzer immediately after userspace opens input device (found by
syzcaller)
- another fix for Raydium touchscreens that do not like splitting
command transfers
- quirks for i8042, soc_button_array, and goodix drivers to make them
work better with certain hardware.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: goodix - add upside-down quirk for Teclast X98 Pro tablet
Input: cm109 - do not stomp on control URB
Input: i8042 - add Acer laptops to the i8042 reset list
Input: cros_ec_keyb - send 'scancodes' in addition to key events
Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the dmi_use_low_level_irq list
Input: raydium_ts_i2c - do not split tx transactions
Mike Snitzer [Sat, 12 Dec 2020 16:55:37 +0000 (11:55 -0500)]
md: change mddev 'chunk_sectors' from int to unsigned
Commit e2782f560c29 ("Revert "dm raid: remove unnecessary discard
limits for raid10"") exposed compiler warnings introduced by commit e0910c8e4f87 ("dm raid: fix discard limits for raid1 and raid10"):
In file included from ./include/linux/kernel.h:14,
from ./include/asm-generic/bug.h:20,
from ./arch/x86/include/asm/bug.h:93,
from ./include/linux/bug.h:5,
from ./include/linux/mmdebug.h:5,
from ./include/linux/gfp.h:5,
from ./include/linux/slab.h:15,
from drivers/md/dm-raid.c:8:
drivers/md/dm-raid.c: In function ‘raid_io_hints’:
./include/linux/minmax.h:18:28: warning: comparison of distinct pointer types lacks a cast
(!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
^~
./include/linux/minmax.h:32:4: note: in expansion of macro ‘__typecheck’
(__typecheck(x, y) && __no_side_effects(x, y))
^~~~~~~~~~~
./include/linux/minmax.h:42:24: note: in expansion of macro ‘__safe_cmp’
__builtin_choose_expr(__safe_cmp(x, y), \
^~~~~~~~~~
./include/linux/minmax.h:51:19: note: in expansion of macro ‘__careful_cmp’
#define min(x, y) __careful_cmp(x, y, <)
^~~~~~~~~~~~~
./include/linux/minmax.h:84:39: note: in expansion of macro ‘min’
__x == 0 ? __y : ((__y == 0) ? __x : min(__x, __y)); })
^~~
drivers/md/dm-raid.c:3739:33: note: in expansion of macro ‘min_not_zero’
limits->max_discard_sectors = min_not_zero(rs->md.chunk_sectors,
^~~~~~~~~~~~
Fix this by changing the chunk_sectors member of 'struct mddev' from
int to 'unsigned int' to match the type used for the 'chunk_sectors'
member of 'struct queue_limits'. Various MD code still uses 'int' but
none of it appears to ever make use of signed int; and storing
positive signed int in unsigned is perfectly safe.
Reported-by: Song Liu <songliubraving@fb.com> Fixes: e2782f560c29 ("Revert "dm raid: remove unnecessary discard limits for raid10"") Fixes: e0910c8e4f87 ("dm raid: fix discard limits for raid1 and raid10") Cc: stable@vger,kernel.org # e0910c8e4f87 was marked for stable@ Signed-off-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Masami Hiramatsu [Fri, 11 Dec 2020 07:04:17 +0000 (16:04 +0900)]
x86/kprobes: Fix optprobe to detect INT3 padding correctly
Commit
7705dc855797 ("x86/vmlinux: Use INT3 instead of NOP for linker fill bytes")
changed the padding bytes between functions from NOP to INT3. However,
when optprobe decodes a target function it finds INT3 and gives up the
jump optimization.
Instead of giving up any INT3 detection, check whether the rest of the
bytes to the end of the function are INT3. If all of them are INT3,
those come from the linker. In that case, continue the optprobe jump
optimization.
[ bp: Massage commit message. ]
Fixes: 7705dc855797 ("x86/vmlinux: Use INT3 instead of NOP for linker fill bytes") Reported-by: Adam Zabrocki <pi3@pi3.com.pl> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/160767025681.3880685.16021570341428835411.stgit@devnote2
Stefan Raspl [Tue, 8 Dec 2020 21:08:29 +0000 (22:08 +0100)]
tools/kvm_stat: Exempt time-based counters
The new counters halt_poll_success_ns and halt_poll_fail_ns do not count
events. Instead they provide a time, and mess up our statistics. Therefore,
we should exclude them.
Removal is currently implemented with an exempt list. If more counters like
these appear, we can think about a more general rule like excluding all
fields name "*_ns", in case that's a standing convention.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Tested-and-reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20201208210829.101324-1-raspl@linux.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: mmu: Fix SPTE encoding of MMIO generation upper half
Commit cae7ed3c2cb0 ("KVM: x86: Refactor the MMIO SPTE generation handling")
cleaned up the computation of MMIO generation SPTE masks, however it
introduced a bug how the upper part was encoded:
SPTE bits 52-61 were supposed to contain bits 10-19 of the current
generation number, however a missing shift encoded bits 1-10 there instead
(mostly duplicating the lower part of the encoded generation number that
then consisted of bits 1-9).
In the meantime, the upper part was shrunk by one bit and moved by
subsequent commits to become an upper half of the encoded generation number
(bits 9-17 of bits 0-17 encoded in a SPTE).
In addition to the above, commit 56871d444bc4 ("KVM: x86: fix overlap between SPTE_MMIO_MASK and generation")
has changed the SPTE bit range assigned to encode the generation number and
the total number of bits encoded but did not update them in the comment
attached to their defines, nor in the KVM MMU doc.
Let's do it here, too, since it is too trivial thing to warrant a separate
commit.
Fixes: cae7ed3c2cb0 ("KVM: x86: Refactor the MMIO SPTE generation handling") Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <156700708db2a5296c5ed7a8b9ac71f1e9765c85.1607129096.git.maciej.szmigiero@oracle.com> Cc: stable@vger.kernel.org
[Reorganize macros so that everything is computed from the bit ranges. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Fri, 11 Dec 2020 22:29:46 +0000 (14:29 -0800)]
Merge tag 'mtd/fixes-for-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Second series of fixes for raw NAND drivers initiated because of a
rework of the ECC engine subsystem.
The location of the DT parsing logic got moved, breaking several
drivers which in fact were not doing the ECC engine initialization at
the right place.
These drivers have been fixed by enforcing a particular ECC engine
type and algorithm, software Hamming, while the algorithm may be
overwritten by a DT property. This merge request fixes this in the
xway, socrates, plat_nand, pasemi, orion, mpc5121, gpio, au1550 and
ams-delta controller drivers"
* tag 'mtd/fixes-for-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: xway: Do not force a particular software ECC engine
mtd: rawnand: socrates: Do not force a particular software ECC engine
mtd: rawnand: plat_nand: Do not force a particular software ECC engine
mtd: rawnand: pasemi: Do not force a particular software ECC engine
mtd: rawnand: orion: Do not force a particular software ECC engine
mtd: rawnand: mpc5121: Do not force a particular software ECC engine
mtd: rawnand: gpio: Do not force a particular software ECC engine
mtd: rawnand: au1550: Do not force a particular software ECC engine
mtd: rawnand: ams-delta: Do not force a particular software ECC engine
Linus Torvalds [Fri, 11 Dec 2020 22:26:17 +0000 (14:26 -0800)]
Merge tag 'mmc-v5.10-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"A couple of MMC fixes:
MMC core:
- Fixup condition for CMD13 polling for RPMB requests
MMC host:
- mtk-sd: Fix system suspend/resume support for CQHCI
- mtd-sd: Extend SDIO IRQ fix to more variants
- sdhci-of-arasan: Fix clock registration error for Keem Bay SOC
- tmio: Bring HW to a sane state after a power off"
* tag 'mmc-v5.10-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: mediatek: mark PM functions as __maybe_unused
mmc: block: Fixup condition for CMD13 polling for RPMB requests
mmc: tmio: improve bringing HW to a sane state with MMC_POWER_OFF
mmc: sdhci-of-arasan: Fix clock registration error for Keem Bay SOC
mmc: mediatek: Extend recheck_sdio_irq fix to more variants
mmc: mediatek: Fix system suspend/resume support for CQHCI
Andrii Nakryiko [Fri, 11 Dec 2020 21:36:25 +0000 (22:36 +0100)]
bpf: Fix enum names for bpf_this_cpu_ptr() and bpf_per_cpu_ptr() helpers
Remove bpf_ prefix, which causes these helpers to be reported in verifier
dump as bpf_bpf_this_cpu_ptr() and bpf_bpf_per_cpu_ptr(), respectively. Lets
fix it as long as it is still possible before UAPI freezes on these helpers.
Linus Torvalds [Fri, 11 Dec 2020 22:10:51 +0000 (14:10 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"8 patches.
Subsystems affected by this patch series: proc, selftests, kbuild, and
mm (pagecache, kasan, hugetlb)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/hugetlb: clear compound_nr before freeing gigantic pages
kasan: fix object remaining in offline per-cpu quarantine
elfcore: fix building with clang
initramfs: fix clang build failure
kbuild: avoid static_assert for genksyms
selftest/fpu: avoid clang warning
proc: use untagged_addr() for pagemap_read addresses
revert "mm/filemap: add static for function __add_to_page_cache_locked"
Gerald Schaefer [Fri, 11 Dec 2020 21:36:53 +0000 (13:36 -0800)]
mm/hugetlb: clear compound_nr before freeing gigantic pages
Commit 1378a5ee451a ("mm: store compound_nr as well as compound_order")
added compound_nr counter to first tail struct page, overlaying with
page->mapping. The overlay itself is fine, but while freeing gigantic
hugepages via free_contig_range(), a "bad page" check will trigger for
non-NULL page->mapping on the first tail page:
BUG: Bad page state in process bash pfn:380001
page:00000000c35f0856 refcount:0 mapcount:0 mapping:00000000126b68aa index:0x0 pfn:0x380001
aops:0x0
flags: 0x3ffff00000000000()
raw: 3ffff00000000000000000000000010000000000000001220000000100000000
raw: 00000000000000000000000000000000ffffffff000000000000000000000000
page dumped because: non-NULL mapping
Modules linked in:
CPU: 6 PID: 616 Comm: bash Not tainted 5.10.0-rc7-next-20201208 #1
Hardware name: IBM 3906 M03 703 (LPAR)
Call Trace:
show_stack+0x6e/0xe8
dump_stack+0x90/0xc8
bad_page+0xd6/0x130
free_pcppages_bulk+0x26a/0x800
free_unref_page+0x6e/0x90
free_contig_range+0x94/0xe8
update_and_free_page+0x1c4/0x2c8
free_pool_huge_page+0x11e/0x138
set_max_huge_pages+0x228/0x300
nr_hugepages_store_common+0xb8/0x130
kernfs_fop_write+0xd2/0x218
vfs_write+0xb0/0x2b8
ksys_write+0xac/0xe0
system_call+0xe6/0x288
Disabling lock debugging due to kernel taint
This is because only the compound_order is cleared in
destroy_compound_gigantic_page(), and compound_nr is set to
1U << order == 1 for order 0 in set_compound_order(page, 0).
Fix this by explicitly clearing compound_nr for first tail page after
calling set_compound_order(page, 0).
Link: https://lkml.kernel.org/r/20201208182813.66391-2-gerald.schaefer@linux.ibm.com Fixes: 1378a5ee451a ("mm: store compound_nr as well as compound_order") Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: <stable@vger.kernel.org> [5.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kuan-Ying Lee [Fri, 11 Dec 2020 21:36:49 +0000 (13:36 -0800)]
kasan: fix object remaining in offline per-cpu quarantine
We hit this issue in our internal test. When enabling generic kasan, a
kfree()'d object is put into per-cpu quarantine first. If the cpu goes
offline, object still remains in the per-cpu quarantine. If we call
kmem_cache_destroy() now, slub will report "Objects remaining" error.
=============================================================================
BUG test_module_slab (Not tainted): Objects remaining in test_module_slab on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Register a cpu hotplug function to remove all objects in the offline
per-cpu quarantine when cpu is going offline. Set a per-cpu variable to
indicate this cpu is offline.
[qiang.zhang@windriver.com: fix slab double free when cpu-hotplug] Link: https://lkml.kernel.org/r/20201204102206.20237-1-qiang.zhang@windriver.com Link: https://lkml.kernel.org/r/1606895585-17382-2-git-send-email-Kuan-Ying.Lee@mediatek.com Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Signed-off-by: Zqiang <qiang.zhang@windriver.com> Suggested-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Guangye Yang <guangye.yang@mediatek.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Nicholas Tang <nicholas.tang@mediatek.com> Cc: Miles Chen <miles.chen@mediatek.com> Cc: Qian Cai <qcai@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Fri, 11 Dec 2020 21:36:46 +0000 (13:36 -0800)]
elfcore: fix building with clang
kernel/elfcore.c only contains weak symbols, which triggers a bug with
clang in combination with recordmcount:
Cannot find symbol for section 2: .text.
kernel/elfcore.o: failed
Move the empty stubs into linux/elfcore.h as inline functions. As only
two architectures use these, just use the architecture specific Kconfig
symbols to key off the declaration.
Arnd Bergmann [Fri, 11 Dec 2020 21:36:42 +0000 (13:36 -0800)]
initramfs: fix clang build failure
There is only one function in init/initramfs.c that is in the .text
section, and it is marked __weak. When building with clang-12 and the
integrated assembler, this leads to a bug with recordmcount:
./scripts/recordmcount "init/initramfs.o"
Cannot find symbol for section 2: .text.
init/initramfs.o: failed
I'm not quite sure what exactly goes wrong, but I notice that this
function is only ever called from an __init function, and normally
inlined. Marking it __init as well is clearly correct and it leads to
recordmcount no longer complaining.
Arnd Bergmann [Fri, 11 Dec 2020 21:36:38 +0000 (13:36 -0800)]
kbuild: avoid static_assert for genksyms
genksyms does not know or care about the _Static_assert() built-in, and
sometimes falls back to ignoring the later symbols, which causes
undefined behavior such as
WARNING: modpost: EXPORT symbol "ethtool_set_ethtool_phy_ops" [vmlinux] version generation failed, symbol will not be versioned.
ld: net/ethtool/common.o: relocation R_AARCH64_ABS32 against `__crc_ethtool_set_ethtool_phy_ops' can not be used when making a shared object
net/ethtool/common.o:(_ftrace_annotated_branch+0x0): dangerous relocation: unsupported relocation
Redefine static_assert for genksyms to avoid that.
Link: https://lkml.kernel.org/r/20201203230955.1482058-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Ard Biesheuvel <ardb@kernel.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Kees Cook <keescook@chromium.org> Cc: Rikard Falkeborn <rikard.falkeborn@gmail.com> Cc: Marco Elver <elver@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miles Chen [Fri, 11 Dec 2020 21:36:31 +0000 (13:36 -0800)]
proc: use untagged_addr() for pagemap_read addresses
When we try to visit the pagemap of a tagged userspace pointer, we find
that the start_vaddr is not correct because of the tag.
To fix it, we should untag the userspace pointers in pagemap_read().
I tested with 5.10-rc4 and the issue remains.
Explanation from Catalin in [1]:
"Arguably, that's a user-space bug since tagged file offsets were never
supported. In this case it's not even a tag at bit 56 as per the arm64
tagged address ABI but rather down to bit 47. You could say that the
problem is caused by the C library (malloc()) or whoever created the
tagged vaddr and passed it to this function. It's not a kernel
regression as we've never supported it.
Now, pagemap is a special case where the offset is usually not
generated as a classic file offset but rather derived by shifting a
user virtual address. I guess we can make a concession for pagemap
(only) and allow such offset with the tag at bit (56 - PAGE_SHIFT + 3)"
My test code is based on [2]:
A userspace pointer which has been tagged by 0xb4: 0xb400007662f541c8
userspace program:
uint64 OsLayer::VirtualToPhysical(void *vaddr) {
uint64 frame, paddr, pfnmask, pagemask;
int pagesize = sysconf(_SC_PAGESIZE);
off64_t off = ((uintptr_t)vaddr) / pagesize * 8; // off = 0xb400007662f541c8 / pagesize * 8 = 0x5a00003b317aa0
int fd = open(kPagemapPath, O_RDONLY);
...
if (lseek64(fd, off, SEEK_SET) != off || read(fd, &frame, 8) != 8) {
int err = errno;
string errtxt = ErrorString(err);
if (fd >= 0)
close(fd);
return 0;
}
...
}
/* watch out for wraparound */
// svpfn == 0xb400007662f54
// (mm->task_size >> PAGE) == 0x8000000
if (svpfn > mm->task_size >> PAGE_SHIFT) // the condition is true because of the tag 0xb4
start_vaddr = end_vaddr;
ret = 0;
while (count && (start_vaddr < end_vaddr)) { // we cannot visit correct entry because start_vaddr is set to end_vaddr
int len;
unsigned long end;
...
}
...
}
Andrew Morton [Fri, 11 Dec 2020 21:36:27 +0000 (13:36 -0800)]
revert "mm/filemap: add static for function __add_to_page_cache_locked"
Revert commit 3351b16af494 ("mm/filemap: add static for function
__add_to_page_cache_locked") due to incompatibility with
ALLOW_ERROR_INJECTION which result in build errors.
Link: https://lkml.kernel.org/r/CAADnVQJ6tmzBXvtroBuEH6QA0H+q7yaSKxrVvVxhqr3KBZdEXg@mail.gmail.com Tested-by: Justin Forbes <jmforbes@linuxtx.org> Tested-by: Greg Thelen <gthelen@google.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Michal Kubecek <mkubecek@suse.cz> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Tony Luck <tony.luck@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dmitry Torokhov [Thu, 10 Dec 2020 04:13:24 +0000 (20:13 -0800)]
Input: cm109 - do not stomp on control URB
We need to make sure we are not stomping on the control URB that was
issued when opening the device when attempting to toggle buzzer.
To do that we need to mark it as pending in cm109_open().
Miquel Raynal [Thu, 3 Dec 2020 19:03:40 +0000 (20:03 +0100)]
mtd: rawnand: xway: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Miquel Raynal [Thu, 3 Dec 2020 19:03:39 +0000 (20:03 +0100)]
mtd: rawnand: socrates: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Miquel Raynal [Thu, 3 Dec 2020 19:03:38 +0000 (20:03 +0100)]
mtd: rawnand: plat_nand: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Miquel Raynal [Thu, 3 Dec 2020 19:03:37 +0000 (20:03 +0100)]
mtd: rawnand: pasemi: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Miquel Raynal [Thu, 3 Dec 2020 19:03:36 +0000 (20:03 +0100)]
mtd: rawnand: orion: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Reported-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Fixes: 553508cec2e8 ("mtd: rawnand: orion: Move the ECC initialization to ->attach_chip()") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/linux-mtd/20201203190340.15522-6-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 3 Dec 2020 19:03:35 +0000 (20:03 +0100)]
mtd: rawnand: mpc5121: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Miquel Raynal [Thu, 3 Dec 2020 19:03:34 +0000 (20:03 +0100)]
mtd: rawnand: gpio: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Miquel Raynal [Thu, 3 Dec 2020 19:03:33 +0000 (20:03 +0100)]
mtd: rawnand: au1550: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Miquel Raynal [Thu, 3 Dec 2020 19:03:32 +0000 (20:03 +0100)]
mtd: rawnand: ams-delta: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.