The tegra_powergate_power_up() has a typo in the error code path where it
will try to disable clocks twice, fix it. In practice that error never
happens, so this is a minor correction.
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The size of the exception stacks was increased by the commit in Fixes,
resulting in stack sizes greater than a page in size. The #VC exception
handling was only mapping the first (bottom) page, resulting in an
SEV-ES guest failing to boot.
Make the #VC exception stacks part of the default exception stacks
storage and allocate them with a CONFIG_AMD_MEM_ENCRYPT=y .config. Map
them only when a SEV-ES guest has been detected.
Rip out the custom VC stacks mapping and storage code.
In preparation for other confidential computing technologies, introduce
a generic helper function, cc_platform_has(), that can be used to
check for specific active confidential computing attributes, like
memory encryption. This is intended to eliminate having to add multiple
technology-specific checks to the code (e.g. if (sev_active() ||
tdx_active() || ... ).
Previous fix aded bpf_clamp_umax() helper use to re-validate boundaries.
While that works correctly, it introduces more branches, which blows up
past 1 million instructions in no-alu32 variant of strobemeta selftests.
Switching len variable from u32 to u64 also fixes the issue and reduces
the number of validated instructions, so use that instead. Fix this
patch and bpf_clamp_umax() removed, both alu32 and no-alu32 selftests
pass.
There are several error return paths that dereference the null pointer
host because the pointer has not yet been set to a valid value.
Fix this by adding a new out_mmc label and exiting via this label
to avoid the host clean up and hence the null pointer dereference.
Addresses-Coverity: ("Explicit null dereference") Fixes: 8105c2abbf36 ("mmc: moxart: Fix reference count leaks in moxart_probe") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20211013100052.125461-1-colin.king@canonical.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using a kernel pointer in place of a dma_addr_t token can
lead to undefined behavior if that makes it into cache
management functions. The compiler caught one such attempt
in a cast:
drivers/net/wireless/ath/ath10k/mac.c: In function 'ath10k_add_interface':
drivers/net/wireless/ath/ath10k/mac.c:5586:47: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
5586 | arvif->beacon_paddr = (dma_addr_t)arvif->beacon_buf;
| ^
Looking through how this gets used down the way, I'm fairly
sure that beacon_paddr is never accessed again for ATH10K_DEV_TYPE_HL
devices, and if it was accessed, that would be a bug.
Change the assignment to use a known-invalid address token
instead, which avoids the warning and makes it easier to catch
bugs if it does end up getting used.
Fixes: e263bdab9c0e ("ath10k: high latency fixes for beacon buffer") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211014075153.3655910-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The premise of commit 6f9f17287e78 ("SUNRPC: Mitigate cond_resched() in
xprt_transmit()") was that cond_resched() is expensive and unnecessary
when there has been just a single send.
The point of cond_resched() is to ensure that tasks that should pre-empt
this one get a chance to do so when it is safe to do so. The code prior
to commit 6f9f17287e78 failed to take into account that it was keeping a
rpc_task pinned for longer than it needed to, and so rather than doing a
full revert, let's just move the cond_resched.
Change PCIe Max Payload Size setting in PCIe Device Control register to 512
bytes to align with PCIe Link Initialization sequence as defined in Marvell
Armada 3700 Functional Specification. According to the specification,
maximal Max Payload Size supported by this device is 512 bytes.
Without this kernel prints suspicious line:
pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 256 (was 16384, max 512)
With this change it changes to:
pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 256 (was 512, max 512)
Macros SUN8I_CSC_CTRL() and SUN8I_CSC_COEFF() don't follow usual
recommendation of having arguments enclosed in parenthesis. While that
didn't change anything for quite sometime, it actually become important
after CSC code rework with commit ea067aee45a8 ("drm/sun4i: de2/de3:
Remove redundant CSC matrices").
Without this fix, colours are completely off for supported YVU formats
on SoCs with DE2 (A64, H3, R40, etc.).
Fix the issue by enclosing macro arguments in parenthesis.
When CONFIG_SMP=y, timebase synchronization is required when the second
kernel is started.
arch/powerpc/kernel/smp.c:
int __cpu_up(unsigned int cpu, struct task_struct *tidle)
{
...
if (smp_ops->give_timebase)
smp_ops->give_timebase();
...
}
void start_secondary(void *unused)
{
...
if (smp_ops->take_timebase)
smp_ops->take_timebase();
...
}
When CONFIG_HOTPLUG_CPU=n and CONFIG_KEXEC_CORE=n,
smp_85xx_ops.give_timebase is NULL,
smp_85xx_ops.take_timebase is NULL,
As a result, the timebase is not synchronized.
Timebase synchronization does not depend on CONFIG_HOTPLUG_CPU.
Fixes: 56f1ba280719 ("powerpc/mpc85xx: refactor the PM operations") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210929033646.39630-3-nixiaoming@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 587164cd, introduced new opal message type (OPAL_MSG_PRD2) and
added opal notifier. But I missed to unregister the notifier during
module unload path. This results in below call trace if you try to
unload and load opal_prd module.
Also add new notifier_block for OPAL_MSG_PRD2 message.
Sample calltrace (modprobe -r opal_prd; modprobe opal_prd)
BUG: Unable to handle kernel data access on read at 0xc0080000192200e0
Faulting instruction address: 0xc00000000018d1cc
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
CPU: 66 PID: 7446 Comm: modprobe Kdump: loaded Tainted: G E 5.14.0prd #759
NIP: c00000000018d1cc LR: c00000000018d2a8 CTR: c0000000000cde10
REGS: c0000003c4c0f0a0 TRAP: 0300 Tainted: G E (5.14.0prd)
MSR: 9000000002009033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE> CR: 24224824 XER: 20040000
CFAR: c00000000018d2a4 DAR: c0080000192200e0 DSISR: 40000000 IRQMASK: 1
...
NIP notifier_chain_register+0x2c/0xc0
LR atomic_notifier_chain_register+0x48/0x80
Call Trace:
0xc000000002090610 (unreliable)
atomic_notifier_chain_register+0x58/0x80
opal_message_notifier_register+0x7c/0x1e0
opal_prd_probe+0x84/0x150 [opal_prd]
platform_probe+0x78/0x130
really_probe+0x110/0x5d0
__driver_probe_device+0x17c/0x230
driver_probe_device+0x60/0x130
__driver_attach+0xfc/0x220
bus_for_each_dev+0xa8/0x130
driver_attach+0x34/0x50
bus_add_driver+0x1b0/0x300
driver_register+0x98/0x1a0
__platform_driver_register+0x38/0x50
opal_prd_driver_init+0x34/0x50 [opal_prd]
do_one_initcall+0x60/0x2d0
do_init_module+0x7c/0x320
load_module+0x3394/0x3650
__do_sys_finit_module+0xd4/0x160
system_call_exception+0x140/0x290
system_call_common+0xf4/0x258
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Fixes: d525914b5bd8 ("mtd: rawnand: xway: Move the ECC initialization to ->attach_chip()") Cc: stable@vger.kernel.org Cc: Jan Hoffmann <jan@3e8.eu> Cc: Kestrel seventyfour <kestrelseventyfour@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Jan Hoffmann <jan@3e8.eu> Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-10-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Since commit 48720ba56891 ("virtio/s390: use DMA memory for ccw I/O and
classic notifiers") we were supposed to make sure that
virtio_ccw_release_dev() completes before the ccw device and the
attached dma pool are torn down, but unfortunately we did not. Before
that commit it used to be OK to delay cleaning up the memory allocated
by virtio-ccw indefinitely (which isn't really intuitive for guys used
to destruction happens in reverse construction order), but now we
trigger a BUG_ON if the genpool is destroyed before all memory allocated
from it is deallocated. Which brings down the guest. We can observe this
problem, when unregister_virtio_device() does not give up the last
reference to the virtio_device (e.g. because a virtio-scsi attached scsi
disk got removed without previously unmounting its previously mounted
partition).
To make sure that the genpool is only destroyed after all the necessary
freeing is done let us take a reference on the ccw device on each
ccw_device_dma_zalloc() and give it up on each ccw_device_dma_free().
Actually there are multiple approaches to fixing the problem at hand
that can work. The upside of this one is that it is the safest one while
remaining simple. We don't crash the guest even if the driver does not
pair allocations and frees. The downside is the reference counting
overhead, that the reference counting for ccw devices becomes more
complex, in a sense that we need to pair the calls to the aforementioned
functions for it to be correct, and that if we happen to leak, we leak
more than necessary (the whole ccw device instead of just the genpool).
Some alternatives to this approach are taking a reference in
virtio_ccw_online() and giving it up in virtio_ccw_release_dev() or
making sure virtio_ccw_release_dev() completes its work before
virtio_ccw_remove() returns. The downside of these approaches is that
these are less safe against programming errors.
Cc: <stable@vger.kernel.org> # v5.3 Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Fixes: 48720ba56891 ("virtio/s390: use DMA memory for ccw I/O and classic notifiers") Reported-by: bfu@redhat.com Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a queue is switched to soft offline during heavy load and later
switched to soft online again and now used, it may be that the caller
is blocked forever in the ioctl call.
The failure occurs because there is a pending reply after the queue(s)
have been switched to offline. This orphaned reply is received when
the queue is switched to online and is accidentally counted for the
outstanding replies. So when there was a valid outstanding reply and
this orphaned reply is received it counts as the outstanding one thus
dropping the outstanding counter to 0. Voila, with this counter the
receive function is not called any more and the real outstanding reply
is never received (until another request comes in...) and the ioctl
blocks.
The fix is simple. However, instead of readjusting the counter when an
orphaned reply is detected, I check the queue status for not empty and
compare this to the outstanding counter. So if the queue is not empty
then the counter must not drop to 0 but at least have a value of 1.
commit 9c6c273aa424 ("timer: Remove init_timer_on_stack() in favor
of timer_setup_on_stack()") changed the timer setup from
init_timer_on_stack(() to timer_setup(), but missed to change the
mod_timer() call. And while at it, use msecs_to_jiffies() instead
of the open coded timeout calculation.
Cc: stable@vger.kernel.org Fixes: 9c6c273aa424 ("timer: Remove init_timer_on_stack() in favor of timer_setup_on_stack()") Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The note in c2adda27d202f ("video: backlight: Add of_find_backlight helper
in backlight.c") says that gpio-backlight uses brightness as power state.
This has been fixed since in ec665b756e6f7 ("backlight: gpio-backlight:
Correct initial power state handling") and other backlight drivers do not
require this workaround. Drop the workaround.
This fixes the case where e.g. pwm-backlight can perfectly well be set to
brightness 0 on boot in DT, which without this patch leads to the display
brightness to be max instead of off.
Fixes: c2adda27d202f ("video: backlight: Add of_find_backlight helper in backlight.c") Cc: <stable@vger.kernel.org> # 5.4+ Cc: <stable@vger.kernel.org> # 4.19.x: ec665b756e6f7: backlight: gpio-backlight: Correct initial power state handling Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch extends the DLN2 driver; adding cell for adc_dln2 module.
The original patch[1] fell through the cracks when the driver was added
so ADC has never actually been usable. That patch did not have ACPI
support which was added in v5.9, so the oldest supported version this
current patch can be backported to is 5.10.
Any allocation failure during the #PF path will return with VM_FAULT_OOM
which in turn results in pagefault_out_of_memory. This can happen for 2
different reasons. a) Memcg is out of memory and we rely on
mem_cgroup_oom_synchronize to perform the memcg OOM handling or b)
normal allocation fails.
The latter is quite problematic because allocation paths already trigger
out_of_memory and the page allocator tries really hard to not fail
allocations. Anyway, if the OOM killer has been already invoked there
is no reason to invoke it again from the #PF path. Especially when the
OOM condition might be gone by that time and we have no way to find out
other than allocate.
Moreover if the allocation failed and the OOM killer hasn't been invoked
then we are unlikely to do the right thing from the #PF context because
we have already lost the allocation context and restictions and
therefore might oom kill a task from a different NUMA domain.
This all suggests that there is no legitimate reason to trigger
out_of_memory from pagefault_out_of_memory so drop it. Just to be sure
that no #PF path returns with VM_FAULT_OOM without allocation print a
warning that this is happening before we restart the #PF.
[VvS: #PF allocation can hit into limit of cgroup v1 kmem controller.
This is a local problem related to memcg, however, it causes unnecessary
global OOM kills that are repeated over and over again and escalate into a
real disaster. This has been broken since kmem accounting has been
introduced for cgroup v1 (3.8). There was no kmem specific reclaim for
the separate limit so the only way to handle kmem hard limit was to return
with ENOMEM. In upstream the problem will be fixed by removing the
outdated kmem limit, however stable and LTS kernels cannot do it and are
still affected. This patch fixes the problem and should be backported
into stable/LTS.]
Link: https://lkml.kernel.org/r/f5fd8dd8-0ad4-c524-5f65-920b01972a42@virtuozzo.com Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Uladzislau Rezki <urezki@gmail.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch series "memcg: prohibit unconditional exceeding the limit of dying tasks", v3.
Memory cgroup charging allows killed or exiting tasks to exceed the hard
limit. It can be misused and allowed to trigger global OOM from inside
a memcg-limited container. On the other hand if memcg fails allocation,
called from inside #PF handler it triggers global OOM from inside
pagefault_out_of_memory().
To prevent these problems this patchset:
(a) removes execution of out_of_memory() from
pagefault_out_of_memory(), becasue nobody can explain why it is
necessary.
(b) allow memcg to fail allocation of dying/killed tasks.
This patch (of 3):
Any allocation failure during the #PF path will return with VM_FAULT_OOM
which in turn results in pagefault_out_of_memory which in turn executes
out_out_memory() and can kill a random task.
An allocation might fail when the current task is the oom victim and
there are no memory reserves left. The OOM killer is already handled at
the page allocator level for the global OOM and at the charging level
for the memcg one. Both have much more information about the scope of
allocation/charge request. This means that either the OOM killer has
been invoked properly and didn't lead to the allocation success or it
has been skipped because it couldn't have been invoked. In both cases
triggering it from here is pointless and even harmful.
It makes much more sense to let the killed task die rather than to wake
up an eternally hungry oom-killer and send him to choose a fatter victim
for breakfast.
Link: https://lkml.kernel.org/r/0828a149-786e-7c06-b70a-52d086818ea3@virtuozzo.com Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Uladzislau Rezki <urezki@gmail.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emit similar instruction sequences to commit a048a07d7f4535
("powerpc/64s: Add support for a store forwarding barrier at kernel
entry/exit") when encountering BPF_NOSPEC.
Mitigations are enabled depending on what the firmware advertises. In
particular, we do not gate these mitigations based on current settings,
just like in x86. Due to this, we don't need to take any action if
mitigations are enabled or disabled at runtime.
Add a helper to check if a given offset is within the branch range for a
powerpc conditional branch instruction, and update some sites to use the
new helper.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/442b69a34ced32ca346a0d9a855f3f6cfdbbbd41.1633464148.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Memory cgroup charging allows killed or exiting tasks to exceed the hard
limit. It is assumed that the amount of the memory charged by those
tasks is bound and most of the memory will get released while the task
is exiting. This is resembling a heuristic for the global OOM situation
when tasks get access to memory reserves. There is no global memory
shortage at the memcg level so the memcg heuristic is more relieved.
The above assumption is overly optimistic though. E.g. vmalloc can
scale to really large requests and the heuristic would allow that. We
used to have an early break in the vmalloc allocator for killed tasks
but this has been reverted by commit b8c8a338f75e ("Revert "vmalloc:
back off when the current task is killed""). There are likely other
similar code paths which do not check for fatal signals in an
allocation&charge loop. Also there are some kernel objects charged to a
memcg which are not bound to a process life time.
It has been observed that it is not really hard to trigger these
bypasses and cause global OOM situation.
One potential way to address these runaways would be to limit the amount
of excess (similar to the global OOM with limited oom reserves). This
is certainly possible but it is not really clear how much of an excess
is desirable and still protects from global OOMs as that would have to
consider the overall memcg configuration.
This patch is addressing the problem by removing the heuristic
altogether. Bypass is only allowed for requests which either cannot
fail or where the failure is not desirable while excess should be still
limited (e.g. atomic requests). Implementation wise a killed or dying
task fails to charge if it has passed the OOM killer stage. That should
give all forms of reclaim chance to restore the limit before the failure
(ENOMEM) and tell the caller to back off.
In addition, this patch renames should_force_charge() helper to
task_is_dying() because now its use is not associated witch forced
charging.
This patch depends on pagefault_out_of_memory() to not trigger
out_of_memory(), because then a memcg failure can unwind to VM_FAULT_OOM
and cause a global OOM killer.
Link: https://lkml.kernel.org/r/8f5cebbb-06da-4902-91f0-6566fc4b4203@virtuozzo.com Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Roman Gushchin <guro@fb.com> Cc: Uladzislau Rezki <urezki@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Shakeel Butt <shakeelb@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, it is not possible to migrate a neighbor entry between NUD_PERMANENT
state and NTF_USE flag with a dynamic NUD state from a user space control plane.
Similarly, it is not possible to add/remove NTF_EXT_LEARNED flag from an existing
neighbor entry in combination with NTF_USE flag.
This is due to the latter directly calling into neigh_event_send() without any
meta data updates as happening in __neigh_update(). Thus, to enable this use
case, extend the latter with a NEIGH_UPDATE_F_USE flag where we break the
NUD_PERMANENT state in particular so that a latter neigh_event_send() is able
to re-resolve a neighbor entry.
Before fix, NUD_PERMANENT -> NUD_* & NTF_USE:
# ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
[...]
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
[...]
As can be seen, despite the admin-triggered replace, the entry remains in the
NUD_PERMANENT state.
After fix, NUD_PERMANENT -> NUD_* & NTF_USE:
# ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
[...]
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE
[...]
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn STALE
[...]
# ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
[...]
After the fix, the admin-triggered replace switches to a dynamic state from
the NTF_USE flag which triggered a new neighbor resolution. Likewise, we can
transition back from there, if needed, into NUD_PERMANENT.
Similar before/after behavior can be observed for below transitions:
Before fix, NTF_USE -> NTF_USE | NTF_EXT_LEARNED -> NTF_USE:
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
[...]
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
[...]
After fix, NTF_USE -> NTF_USE | NTF_EXT_LEARNED -> NTF_USE:
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
[...]
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE
[...]
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
[..]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
We use inline_dentry which requires to allocate dentry page when adding a link.
If we allow to reclaim memory from filesystem, we do down_read(&sbi->cp_rwsem)
twice by f2fs_lock_op(). I think this should be okay, but how about stopping
the lockdep complaint [1]?
When using "devm_request_threaded_irq(,,,,IRQF_ONESHOT,,)" in a driver,
only the first interrupt is handled, and following interrupts are never
delivered (initially reported in [1]).
That's because the RISC-V PLIC cannot EOI masked interrupts, as explained
in the description of Interrupt Completion in the PLIC spec [2]:
<quote>
The PLIC signals it has completed executing an interrupt handler by
writing the interrupt ID it received from the claim to the claim/complete
register. The PLIC does not check whether the completion ID is the same
as the last claim ID for that target. If the completion ID does not match
an interrupt source that *is currently enabled* for the target, the
completion is silently ignored.
</quote>
Re-enable the interrupt before completion if it has been masked during
the handling, and remask it afterwards.
copy_process currently copies task_struct.posix_cputimers_work as-is. If a
timer interrupt arrives while handling clone and before dup_task_struct
completes then the child task will have:
copy_process clears task_struct.task_works, so (2) will have no effect and
posix_cpu_timers_work will never run (not to mention it doesn't make sense
for two tasks to share a common linked list).
Since posix_cpu_timers_work never runs, posix_cputimers_work.scheduled is
never cleared. Since scheduled is set, future timer interrupts will skip
scheduling work, with the ultimate result that the task will never receive
timer expirations.
Together, the complete flow is:
1. Task 1 calls clone(), enters kernel.
2. Timer interrupt fires, schedules task work on Task 1.
2a. task_struct.posix_cputimers_work.scheduled = true
2b. task_struct.posix_cputimers_work.work added to
task_struct.task_works.
3. dup_task_struct() copies Task 1 to Task 2.
4. copy_process() clears task_struct.task_works for Task 2.
5. Future timer interrupts on Task 2 see
task_struct.posix_cputimers_work.scheduled = true and skip scheduling
work.
Fix this by explicitly clearing contents of task_struct.posix_cputimers_work
in copy_process(). This was never meant to be shared or inherited across
tasks in the first place.
Fixes: 1fb497dd0030 ("posix-cpu-timers: Provide mechanisms to defer timer handling to task_work") Reported-by: Rhys Hiltner <rhys@justin.tv> Signed-off-by: Michael Pratt <mpratt@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211101210615.716522-1-mpratt@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Errata SKX37 is word-for-word identical to the other errata listed in
this workaround. I happened to notice this after investigating a CMCI
storm on a Skylake host. While I can't confirm this was the root cause,
spurious corrected errors does sound like a likely suspect.
Fixes: 2976908e4198 ("x86/mce: Do not log spurious corrected mce errors") Signed-off-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20211029205759.GA7385@codemonkey.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
{standard input}: Assembler messages:
{standard input}:287: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32'
{standard input}:680: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32'
{standard input}:1274: Error: opcode not supported on this processor: mips3 (mips3) `dins $12,$9,32,32'
{standard input}:2175: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32'
make[1]: *** [scripts/Makefile.build:277: mm/highmem.o] Error 1
with code produced from `__cmpxchg64' for MIPS64r2 CPU configurations
using CONFIG_32BIT and CONFIG_PHYS_ADDR_T_64BIT.
This is due to MIPS_ISA_ARCH_LEVEL downgrading the assembly architecture
to `r4000' i.e. MIPS III for MIPS64r2 configurations, while there is a
block of code containing a DINS MIPS64r2 instruction conditionalized on
MIPS_ISA_REV >= 2 within the scope of the downgrade.
The assembly architecture override code pattern has been put there for
LL/SC instructions, so that code compiles for configurations that select
a processor to build for that does not support these instructions while
still providing run-time support for processors that do, dynamically
switched by non-constant `cpu_has_llsc'. It went in with linux-mips.org
commit aac8aa7717a2 ("Enable a suitable ISA for the assembler around
ll/sc so that code builds even for processors that don't support the
instructions. Plus minor formatting fixes.") back in 2005.
Fix the problem by wrapping these instructions along with the adjacent
SYNC instructions only, following the practice established with commit cfd54de3b0e4 ("MIPS: Avoid move psuedo-instruction whilst using
MIPS_ISA_LEVEL") and commit 378ed6f0e3c5 ("MIPS: Avoid using .set mips0
to restore ISA"). Strictly speaking the SYNC instructions do not have
to be wrapped as they are only used as a Loongson3 erratum workaround,
so they will be enabled in the assembler by default, but do this so as
to keep code consistent with other places.
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: c7e2d71dda7a ("MIPS: Fix set_pte() for Netlogic XLR using cmpxchg64()") Cc: stable@vger.kernel.org # v5.1+ Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I noticed that sometimes at kernel startup the backtraces did not
included the function names of init functions. Their address were not
resolved to function names and instead only the address was printed.
Debugging shows that the culprit is is_ksym_addr() which is called
by the backtrace functions to check if an address belongs to a function in
the kernel. The problem occurs only for CONFIG_KALLSYMS_ALL=y.
When looking at is_ksym_addr() one can see that for CONFIG_KALLSYMS_ALL=y
the function only tries to resolve the address via is_kernel() function,
which checks like this:
if (addr >= _stext && addr <= _end)
return 1;
On parisc the init functions are located before _stext, so this check fails.
Other platforms seem to have all functions (including init functions)
behind _stext.
The following patch moves the _stext symbol at the beginning of the
kernel and thus includes the init section. This fixes the check and does
not seem to have any negative side effects on where the kernel mapping
happens in the map_pages() function in arch/parisc/mm/init.c.
Naresh and Antonio ran into a build failure with latest Debian
armhf compilers, with lots of output like
tmp/ccY3nOAs.s:2215: Error: selected processor does not support `cpsid i' in ARM mode
As it turns out, $(cc-option) fails early here when the FPU is not
selected before CPU architecture is selected, as the compiler
option check runs before enabling -msoft-float, which causes
a problem when testing a target architecture level without an FPU:
cc1: error: '-mfloat-abi=hard': selected architecture lacks an FPU
Passing e.g. -march=armv6k+fp in place of -march=armv6k would avoid this
issue, but the fallback logic is already broken because all supported
compilers (gcc-5 and higher) are much more recent than these options,
and building with -march=armv5t as a fallback no longer works.
The best way forward that I see is to just remove all the checks, which
also has the nice side-effect of slightly improving the startup time for
'make'.
The -mtune=marvell-f option was apparently never supported by any mainline
compiler, and the custom Codesourcery gcc build that did support is
now too old to build kernels, so just use -mtune=xscale unconditionally
for those.
This should be safe to apply on all stable kernels, and will be required
in order to keep building them with gcc-11 and higher.
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=996419 Reported-by: Antonio Terceiro <antonio.terceiro@linaro.org> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com> Cc: Matthias Klose <doko@debian.org> Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently __set_fixmap() bails out with a warning when called in early boot
from early_iounmap(). Fix it, and while at it, make the comment a bit easier
to understand.
Cc: <stable@vger.kernel.org> Fixes: b089c31c519c ("ARM: 8667/3: Fix memory attribute inconsistencies when using fixmap") Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The below commit added optional support for passing a bind address.
It configures the sockaddr bind arguments before parsing options and
reconfigures on options -b and -4.
This broke support for passing port (-p) on its own.
Configure sockaddr after parsing all arguments.
Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Ensure diagnostics monitoring support is implemented for the SFF 8472
compliant port module and set the correct length for ethtool port
module eeprom read.
Fixes: f56ec6766dcf ("cxgb4: Add support for ethtool i2c dump") Signed-off-by: Manoj Malviya <manojmalviya@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
We got the following WARNING when running ab/nginx
test with RDMA link flapping (up-down-up).
The reason is when smc_sock fallback and at linkdown
happens simultaneously, we may got the following situation:
smc_sock was set to SMC_CLOSED and sock_put() been called
when terminate the link group. But later application call
close() on the socket, then we got:
__smc_release():
if (smc_sock->fallback)
smc_sock->sk_state = SMC_CLOSED
sock_put(smc_sock)
Again we set the smc_sock to CLOSED through it's already
in CLOSED state, and double put the refcnt, so the following
warning happens:
refcount_t: underflow; use-after-free.
WARNING: CPU: 5 PID: 860 at lib/refcount.c:28 refcount_warn_saturate+0x8d/0xf0
Modules linked in:
CPU: 5 PID: 860 Comm: nginx Not tainted 5.10.46+ #403
Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8c24b4c 04/01/2014
RIP: 0010:refcount_warn_saturate+0x8d/0xf0
Code: 05 5c 1e b5 01 01 e8 52 25 bc ff 0f 0b c3 80 3d 4f 1e b5 01 00 75 ad 48
This patch adds check in __smc_release() to make
sure we won't do an extra sock_put() and set the
socket to CLOSED when its already in CLOSED state.
Fixes: 51f1de79ad8e (net/smc: replace sock_put worker by socket refcounting) Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently vosck_connect() increments sock refcount for nonblocking
socket each time it's called, which can lead to memory leak if
it's called multiple times because connect timeout function decrements
sock refcount only once.
Fixes it by making vsock_connect() return -EALREADY immediately when
sock state is already SS_CONNECTING.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit fe28c53ed71d ("net: stmmac: fix taprio configuration when
base_time is in the past") allowed some base time values in the past,
but apparently not all, the base-time value of 0 (Jan 1st 1970) is still
explicitly denied by the driver.
Remove the bogus check.
Fixes: b60189e0392f ("net: stmmac: Integrate EST with TAPRIO scheduler API") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, driver only allow configuring ETS bandwidth of TCs according
to the max TC number queried from firmware. However, the hardware actually
supports 8 TCs and users may need to configure ETS bandwidth of all TCs,
so remove the restriction.
Fixes: 330baff5423b ("net: hns3: add ETS TC weight setting in SSU module") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
1) if q->tk_offset == TK_OFFS_MAX, then get_tcp_tstamp() calls
ktime_mono_to_any() with out-of-bound value.
2) if q->tk_offset is changed in taprio_parse_clockid(),
taprio_get_time() might also call ktime_mono_to_any()
with out-of-bound value as sysbot found:
UBSAN: array-index-out-of-bounds in kernel/time/timekeeping.c:908:27
index 3 is out of range for type 'ktime_t *[3]'
CPU: 1 PID: 25668 Comm: kworker/u4:0 Not tainted 5.15.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
ubsan_epilogue+0xb/0x5a lib/ubsan.c:151
__ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291
ktime_mono_to_any+0x1d4/0x1e0 kernel/time/timekeeping.c:908
get_tcp_tstamp net/sched/sch_taprio.c:322 [inline]
get_packet_txtime net/sched/sch_taprio.c:353 [inline]
taprio_enqueue_one+0x5b0/0x1460 net/sched/sch_taprio.c:420
taprio_enqueue+0x3b1/0x730 net/sched/sch_taprio.c:485
dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3785
__dev_xmit_skb net/core/dev.c:3869 [inline]
__dev_queue_xmit+0x1f6e/0x3630 net/core/dev.c:4194
batadv_send_skb_packet+0x4a9/0x5f0 net/batman-adv/send.c:108
batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline]
batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline]
batadv_iv_send_outstanding_bat_ogm_packet+0x6d7/0x8e0 net/batman-adv/bat_iv_ogm.c:1701
process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298
worker_thread+0x658/0x11f0 kernel/workqueue.c:2445
kthread+0x405/0x4f0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
Fixes: 7ede7b03484b ("taprio: make clock reference conversions easier") Fixes: 54002066100b ("taprio: Adjust timestamps for TCP packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vedang Patel <vedang.patel@intel.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20211108180815.1822479-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
DEFINE_PROC_SHOW_ATTRIBUTE() is supposed to be used to define a series
of functions and variables to register proc file easily. And the users
can use proc_create_data() to pass their own private data and get it
via seq->private in the callback. Unfortunately, the proc file system
use PDE_DATA() to get private data instead of inode->i_private. So fix
it. Fortunately, there only one user of it which does not pass any
private data, so this bug does not break any in-tree codes.
Link: https://lkml.kernel.org/r/20211029032638.84884-1-songmuchun@bytedance.com Fixes: 97a32539b956 ("proc: convert everything to "struct proc_ops"") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Florent Revest <revest@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The priv->ntfy_blocks[] has "priv->num_ntfy_blks" elements so this >
needs to be >= to prevent an off by one bug. The priv->ntfy_blocks[]
array is allocated in gve_alloc_notify_blocks().
Fixes: 87a7f321bb6a ("gve: Recover from queue stall due to missed IRQ") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Strparser is reusing the qdisc_skb_cb struct to stash the skb message handling
progress, e.g. offset and length of the skb. First this is poorly named and
inherits a struct from qdisc that doesn't reflect the actual usage of cb[] at
this layer.
But, more importantly strparser is using the following to access its metadata.
So we use 12 bytes of ->data[] in struct. However in BPF code running parser
and verdict the user has read capabilities into the data[] array as well. Its
not too problematic, but we should not be exposing internal state to BPF
program. If its really needed then we can use the probe_read() APIs which allow
reading kernel memory. And I don't believe cb[] layer poses any API breakage by
moving this around because programs can't depend on cb[] across layers.
In order to fix another issue with a ctx rewrite we need to stash a temp
variable somewhere. To make this work cleanly this patch builds a cb struct
for sk_skb types called sk_skb_cb struct. Then we can use this consistently
in the strparser, sockmap space. Additionally we can start allowing ->cb[]
write access after this.
Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Jussi Maki <joamaki@gmail.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20211103204736.248403-5-john.fastabend@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
We do not need to handle unhash from BPF side we can simply wait for the
close to happen. The original concern was a socket could transition from
ESTABLISHED state to a new state while the BPF hook was still attached.
But, we convinced ourself this is no longer possible and we also improved
BPF sockmap to handle listen sockets so this is no longer a problem.
More importantly though there are cases where unhash is called when data is
in the receive queue. The BPF unhash logic will flush this data which is
wrong. To be correct it should keep the data in the receive queue and allow
a receiving application to continue reading the data. This may happen when
tcp_abort() is received for example. Instead of complicating the logic in
unhash simply moving all this to tcp_close() hook solves this.
Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Jussi Maki <joamaki@gmail.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20211103204736.248403-3-john.fastabend@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
gcc warns about undefined behavior the vmalloc code when building
with CONFIG_ARM64_PA_BITS_52, when the 'idx++' in the argument to
__phys_to_pte_val() is evaluated twice:
mm/vmalloc.c: In function 'vmap_pfn_apply':
mm/vmalloc.c:2800:58: error: operation on 'data->idx' may be undefined [-Werror=sequence-point]
2800 | *pte = pte_mkspecial(pfn_pte(data->pfns[data->idx++], data->prot));
| ~~~~~~~~~^~
arch/arm64/include/asm/pgtable-types.h:25:37: note: in definition of macro '__pte'
25 | #define __pte(x) ((pte_t) { (x) } )
| ^
arch/arm64/include/asm/pgtable.h:80:15: note: in expansion of macro '__phys_to_pte_val'
80 | __pte(__phys_to_pte_val((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
| ^~~~~~~~~~~~~~~~~
mm/vmalloc.c:2800:30: note: in expansion of macro 'pfn_pte'
2800 | *pte = pte_mkspecial(pfn_pte(data->pfns[data->idx++], data->prot));
| ^~~~~~~
I have no idea why this never showed up earlier, but the safest
workaround appears to be changing those macros into inline functions
so the arguments get evaluated only once.
Cc: Matthew Wilcox <willy@infradead.org> Fixes: 75387b92635e ("arm64: handle 52-bit physical addresses in page table entries") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211105075414.2553155-1-arnd@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
skb is already freed by dev_kfree_skb in pn533_fill_fragment_skbs,
but follow error handler branch when pn533_fill_fragment_skbs()
fails, skb is freed again, results in double free issue. Fix this
by not free skb in error path of pn533_fill_fragment_skbs.
Fixes: 963a82e07d4e ("NFC: pn533: Split large Tx frames in chunks") Fixes: 93ad42020c2d ("NFC: pn533: Target mode Tx fragmentation support") Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Both ifindex and LLC_SK_DEV_HASH_ENTRIES are signed.
This means that (ifindex % LLC_SK_DEV_HASH_ENTRIES) is negative
if @ifindex is negative.
We could simply make LLC_SK_DEV_HASH_ENTRIES unsigned.
In this patch I chose to use hash_32() to get more entropy
from @ifindex, like llc_sk_laddr_hashfn().
UBSAN: array-index-out-of-bounds in ./include/net/llc.h:75:26
index -43 is out of range for type 'hlist_head [64]'
CPU: 1 PID: 20999 Comm: syz-executor.3 Not tainted 5.15.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
ubsan_epilogue+0xb/0x5a lib/ubsan.c:151
__ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291
llc_sk_dev_hash include/net/llc.h:75 [inline]
llc_sap_add_socket+0x49c/0x520 net/llc/llc_conn.c:697
llc_ui_bind+0x680/0xd70 net/llc/af_llc.c:404
__sys_bind+0x1e9/0x250 net/socket.c:1693
__do_sys_bind net/socket.c:1704 [inline]
__se_sys_bind net/socket.c:1702 [inline]
__x64_sys_bind+0x6f/0xb0 net/socket.c:1702
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fa503407ae9
Fixes: 6d2e3ea28446 ("llc: use a device based hash table to speed up multicast delivery") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If btf__new() is called then there needs to be a corresponding btf__free().
Fixes: f8dfeae009effc0b ("perf bpf: Show more BPF program info in print_bpf_prog_info()") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20211106053733.3580931-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
snprintf() returns the number of bytes it would have printed if there
were space. But it does not count the NUL terminator. So that means
that if "count == copied" then this has already overflowed by one
character.
There is one possible race window between zs_pool_dec_isolated() and
zs_unregister_migration() because wait_for_isolated_drain() checks the
isolated count without holding class->lock and there is no order inside
zs_pool_dec_isolated(). Thus the below race window could be possible:
Early exits from for_each_child_of_node() should decrement the
node reference counter. Reported by Coccinelle:
drivers/mfd/mfd-core.c:197:2-24: WARNING:
Function "for_each_child_of_node" should have of_node_put() before goto around lines 209.
Fixes: c94bb233a9fe ("mfd: Make MFD core code Device Tree and IRQ domain aware") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210528115126.18370-1-krzysztof.kozlowski@canonical.com Signed-off-by: Sasha Levin <sashal@kernel.org>
When I do fuzz test for bonding device interface, I got the following
use-after-free Calltrace:
==================================================================
BUG: KASAN: use-after-free in bond_enslave+0x1521/0x24f0
Read of size 8 at addr ffff88825bc11c00 by task ifenslave/7365
Last potentially related work creation:
kasan_save_stack+0x23/0x50
kasan_record_aux_stack+0xb7/0xd0
insert_work+0x43/0x190
__queue_work+0x2e3/0x970
delayed_work_timer_fn+0x3e/0x50
call_timer_fn+0x148/0x470
run_timer_softirq+0x8a8/0xc50
__do_softirq+0x107/0x55f
Second to last potentially related work creation:
kasan_save_stack+0x23/0x50
kasan_record_aux_stack+0xb7/0xd0
insert_work+0x43/0x190
__queue_work+0x2e3/0x970
__queue_delayed_work+0x130/0x180
queue_delayed_work_on+0xa7/0xb0
bond_enslave+0xe25/0x24f0
bond_do_ioctl+0x3e0/0x450
dev_ifsioc+0x2ba/0x970
dev_ioctl+0x112/0x710
sock_do_ioctl+0x118/0x1b0
sock_ioctl+0x2e0/0x490
__x64_sys_ioctl+0x118/0x150
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Memory state around the buggy address: ffff88825bc11b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88825bc11b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88825bc11c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^ ffff88825bc11c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88825bc11d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Put new_slave in bond_sysfs_slave_add() will cause use-after-free problems
when new_slave is accessed in the subsequent error handling process. Since
new_slave will be put in the subsequent error handling process, remove the
unnecessary put to fix it.
In addition, when sysfs_create_file() fails, if some files have been crea-
ted successfully, we need to call sysfs_remove_file() to remove them.
Since there are sysfs_create_files() & sysfs_remove_files() can be used,
use these two functions instead.
Fixes: 7afcaec49696 (bonding: use kobject_put instead of _del after kobject_add) Signed-off-by: Huang Guobin <huangguobin4@huawei.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
As reported by Zhang there's a small issue if in forced mode the duplex
mode changes with the link staying up [0]. In this case the MAC isn't
notified about the change.
The proposed patch relies on the phylib state machine and ignores the
fact that there are drivers that uses phylib but not the phylib state
machine. So let's don't change the behavior for such drivers and fix
it w/o re-adding state PHY_FORCING for the case that phylib state
machine is used.
The reference counting issue happens in one exception handling path of
nouveau_svmm_bind(). When cli->svm.svmm is null, the function forgets
to decrease the refcount of mm increased by get_task_mm(), causing a
refcount leak.
Fix this issue by using mmput() to decrease the refcount in the
exception handling path.
Also, the function forgets to do check against null when get mm
by get_task_mm().
Fix this issue by adding null check after get mm by get_task_mm().
Signed-off-by: Chenyuan Mi <cymi20@fudan.edu.cn> Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Fixes: 822cab6150d3 ("drm/nouveau/svm: check for SVM initialized before migrating") Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210907122633.16665-1-cymi20@fudan.edu.cn Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/14 Signed-off-by: Sasha Levin <sashal@kernel.org>
The handling of PMIC register reads through writing 0 to address 4
of the OpRegion is wrong. Instead of returning the read value
through the value64, which is a no-op for function == ACPI_WRITE calls,
store the value and then on a subsequent function == ACPI_READ with
address == 3 (the address for the value field of the OpRegion)
return the stored value.
This has been tested on a Xiaomi Mi Pad 2 and makes the ACPI battery dev
there mostly functional (unfortunately there are still other issues).
Here are the SET() / GET() functions of the PMIC ACPI device,
which use this OpRegion, which clearly show the new behavior to
be correct:
Method (GET, 3, Serialized)
{
If ((AVBE == One))
{
CLNT = Arg0
SA = Arg1
OFF = Arg2
RWM = Zero
If ((AVBG == One))
{
GPRW = Zero
}
}
Return (VAL) /* \_SB_.PCI0.I2C7.PMI5.VAL_ */
}
Method (SET, 4, Serialized)
{
If ((AVBE == One))
{
CLNT = Arg0
SA = Arg1
OFF = Arg2
VAL = Arg3
RWM = One
If ((AVBG == One))
{
GPRW = One
}
}
}
Fixes: 0afa877a5650 ("ACPI / PMIC: intel: add REGS operation region support") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a VF is removed and/or reset its Tx queues need to be
stopped from the PF. This is done by calling the ice_dis_vf_qs()
function, which calls ice_vsi_stop_lan_tx_rings(). Currently
ice_dis_vf_qs() is protected by the VF state bit ICE_VF_STATE_QS_ENA.
Unfortunately, this is causing the Tx queues to not be disabled in some
cases and when the VF tries to re-enable/reconfigure its Tx queues over
virtchnl the op is failing. This is because a VF can be reset and/or
removed before the ICE_VF_STATE_QS_ENA bit is set, but the Tx queues
were already configured via ice_vsi_cfg_single_txq() in the
VIRTCHNL_OP_CONFIG_VSI_QUEUES op. However, the ICE_VF_STATE_QS_ENA bit
is set on a successful VIRTCHNL_OP_ENABLE_QUEUES, which will always
happen after the VIRTCHNL_OP_CONFIG_VSI_QUEUES op.
This was causing the following error message when loading the ice
driver, creating VFs, and modifying VF trust in an endless loop:
[35274.192484] ice 0000:88:00.0: Failed to set LAN Tx queue context, error: ICE_ERR_PARAM
[35274.193074] ice 0000:88:00.0: VF 0 failed opcode 6, retval: -5
[35274.193640] iavf 0000:88:01.0: PF returned error -5 (IAVF_ERR_PARAM) to our request 6
Fix this by always calling ice_dis_vf_qs() and silencing the error
message in ice_vsi_stop_tx_ring() since the calling code ignores the
return anyway. Also, all other places that call ice_vsi_stop_tx_ring()
catch the error, so this doesn't affect those flows since there was no
change to the values the function returns.
Other solutions were considered (i.e. tracking which VF queues had been
"started/configured" in VIRTCHNL_OP_CONFIG_VSI_QUEUES, but it seemed
more complicated than it was worth. This solution also brings in the
chance for other unexpected conditions due to invalid state bit checks.
So, the proposed solution seemed like the best option since there is no
harm in failing to stop Tx queues that were never started.
This issue can be seen using the following commands:
VF was not able to change its hardware MAC address in case
the new address was already present in the MAC filter list.
Change the handling of VF add mac request to not return
if requested MAC address is already present on the list
and check if its hardware MAC needs to be updated in this case.
Fixes: ed4c068d46f6 ("ice: Enable ip link show on the PF to display VF unicast MAC(s)") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The real_dev of a vlan net_device may be freed after
unregister_vlan_dev(). Access the real_dev continually by
vlan_dev_real_dev() will trigger the UAF problem for the
real_dev like following:
Move the put_device(real_dev) to vlan_dev_free(). Ensure
real_dev not be freed before vlan_dev unregistered.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+e4df4e1389e28972e955@syzkaller.appspotmail.com Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Throughout the OpenRISC kernel port VMA is passed as NULL when flushing
kernel tlb entries. Somehow this was missed when I was testing c28b27416da9 ("openrisc: Implement proper SMP tlb flushing") and now the
SMP kernel fails to completely boot.
In OpenRISC VMA is used only to determine which cores need to have their
TLB entries flushed.
This patch updates the logic to flush tlbs on all cores when the VMA is
passed as NULL. Also, we update places VMA is passed as NULL to use
flush_tlb_kernel_range instead. Now, the only place VMA is passed as
NULL is in the implementation of flush_tlb_kernel_range.
ETHTOOL_A_PAUSE_STAT_MAX is the MAX attribute id,
so we need to subtract non-stats and add one to
get a count (IOW -2+1 == -1).
Otherwise we'll see:
ethnl cmd 21: calculated reply length 40, but consumed 52
Fixes: 9a27a33027f2 ("ethtool: add standard pause stats") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch allows to use 0 for `coal->rx_coalesce_usecs` param to
disable rx irq coalescing.
Previously we could enable rx irq coalescing via ethtool
(For ex: `ethtool -C eth0 rx-usecs 2000`) but we couldn't disable
it because this part rejects 0 value:
Return NULL instead of passing to ERR_PTR while err is zero,
this fix smatch warnings:
drivers/xen/xen-pciback/conf_space_capability.c:163
pm_ctrl_init() warn: passing zero to 'ERR_PTR'
Fixes: a92336a1176b ("xen/pciback: Drop two backends, squash and cleanup some code.") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20211008074417.8260-1-yuehaibing@huawei.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
A successful 'clk_prepare()' call should be balanced by a corresponding
'clk_unprepare()' call in the error handling path of the probe, as already
done in the remove function.
More specifically, 'clk_prepare_enable()' is used, but 'clk_disable()' is
also already called. So just the unprepare step has still to be done.
Update the error handling path accordingly.
Fixes: 75d31c2372e4 ("i2c: xlr: add support for Sigma Designs controller variant") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If we already hold open state on the client, yet the server gives us a
completely different stateid to the one we already hold, then we
currently treat it as if it were an out-of-sequence update, and wait for
5 seconds for other updates to come in.
This commit fixes the behaviour so that we immediately start processing
of the new stateid, and then leave it to the call to
nfs4_test_and_free_stateid() to decide what to do with the old stateid.
Fixes: b4868b44c562 ("NFSv4: Wait for stateid updates after CLOSE/OPEN_DOWNGRADE") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When user uses issue_lip to do link bounce, driver sends additional target
reset to remote device before resetting the link. The target reset would
affect other paths with active I/Os. This patch will remove the unnecessary
target reset.
Link: https://lore.kernel.org/r/20211026115412.27691-4-njavali@marvell.com Fixes: 5854771e314e ("[SCSI] qla2xxx: Add ISPFX00 specific bus reset routine") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
For RSCN of type "Area, Domain, or Fabric", which indicate a portion or
entire fabric was disturbed, current driver does not set the scan_need flag
to indicate a session was affected by the disturbance. This in turn can
lead to I/O timeout and delay of relogin. Hence initiate relogin in the
event of fabric disturbance.
Link: https://lore.kernel.org/r/20211026115412.27691-2-njavali@marvell.com Fixes: 1560bafdff9e ("scsi: qla2xxx: Use complete switch scan for RSCN events") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Avoid error like:
In file included from drivers/watchdog/ar7_wdt.c:29:
./arch/mips/include/asm/mach-ar7/ar7.h: In function ‘ar7_is_titan’:
./arch/mips/include/asm/mach-ar7/ar7.h:111:24: error: implicit declaration of function ‘KSEG1ADDR’; did you mean ‘CKSEG1ADDR’? [-Werror=implicit-function-declaration]
111 | return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x24)) & 0xffff) ==
| ^~~~~~~~~
| CKSEG1ADDR
Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210907024904.4127611-1-liu.yun@linux.dev Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The fintek watchdog timer can configure timeouts of second granularity
only up to 255 seconds. Beyond that, the timeout needs to be configured
with minute granularity. WDIOC_GETTIMEOUT should report the actual
timeout configured, not just echo back the timeout configured by the
user. Do so.
Fixes: 96cb4eb019ce ("watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FG") Suggested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.kernel.org/r/5e17960fe8cc0e3cb2ba53de4730b75d9a0f33d5.1628525954.git-series.a.fatoum@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
'make randconfig' can produce a .config file with
"CONFIG_MEMORY_RESERVE=" (no value) since it has no default.
When a subsequent 'make all' is done, kconfig restarts the config
and prompts for a value for MEMORY_RESERVE. This breaks
scripting/automation where there is no interactive user input.
Add a default value for MEMORY_RESERVE. (Any integer value will
work here for kconfig.)
Fixes a kconfig warning:
.config:214:warning: symbol value '' invalid for MEMORY_RESERVE
* Restart config...
Memory reservation (MiB) (MEMORY_RESERVE) [] (NEW)
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") # from beginning of git history Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Today the sh code allocates memory the first time a process uses
the fpu. If that memory allocation fails, kill the affected task
with force_sig(SIGKILL) rather than do_group_exit(SIGKILL).
Calling do_group_exit from an exception handler can potentially lead
to dead locks as do_group_exit is not designed to be called from
interrupt context. Instead use force_sig(SIGKILL) to kill the
userspace process. Sending signals in general and force_sig in
particular has been tested from interrupt context so there should be
no problems.
Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: linux-sh@vger.kernel.org Fixes: 0ea820cf9bf5 ("sh: Move over to dynamically allocated FPU context.") Link: https://lkml.kernel.org/r/20211020174406.17889-6-ebiederm@xmission.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Before the `callback_result` callback was introduced drivers coded their
invocation to the callback in a similar way to:
if (cb->callback) {
spin_unlock(&dma->lock);
cb->callback(cb->callback_param);
spin_lock(&dma->lock);
}
With the introduction of `callback_result` two helpers where introduced to
transparently handle both types of callbacks. And drivers where updated to
look like this:
if (dmaengine_desc_callback_valid(cb)) {
spin_unlock(&dma->lock);
dmaengine_desc_callback_invoke(cb, ...);
spin_lock(&dma->lock);
}
dmaengine_desc_callback_invoke() correctly handles both `callback_result`
and `callback`. But we forgot to update the dmaengine_desc_callback_valid()
function to check for `callback_result`. As a result DMA descriptors that
use the `callback_result` rather than `callback` don't have their callback
invoked by drivers that follow the pattern above.
Fix this by checking for both `callback` and `callback_result` in
dmaengine_desc_callback_valid().
Fixes: f067025bc676 ("dmaengine: add support to provide error result from a DMA transation") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20211023134101.28042-1-lars@metafoo.de Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Free the kbuf buffer before returning from the dpaa2_console_read()
function. The variable no longer goes out of scope, leaking the storage
it points to.
Fix this by providing a handler that always returns zero, to make sure
blank events will be sent to the actual device handling the backlight.
Reported-by: Robin van der Gracht <robin@protonic.nl> Suggested-by: Robin van der Gracht <robin@protonic.nl> Fixes: 8992da44c6805d53 ("auxdisplay: ht16k33: Driver for LED controller") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently /sys/class/graphics/fb0/bl_curve is not accessible (-ENODEV),
as the driver does not connect the backlight to the frame buffer device.
Fix this moving backlight initialization up, and filling in
fb_info.bl_dev.
Fixes: 8992da44c6805d53 ("auxdisplay: ht16k33: Driver for LED controller") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
While writing an empty string to a device attribute is a no-op, and thus
does not need explicit safeguards, the user can still write a single
newline to an attribute file:
echo > .../message
If that happens, img_ascii_lcd_display() trims the newline, yielding an
empty string, and causing an infinite loop in img_ascii_lcd_scroll().
Fix this by adding a check for empty strings. Clear the display in case
one is encountered.
AT_XDMAC_CC_PERID() should be used to setup bits 24..30 of XDMAC_CC
register. Using it without parenthesis around 0x7f & (i) will lead to
setting all the time zero for bits 24..30 of XDMAC_CC as the << operator
has higher precedence over bitwise &. Thus, add paranthesis around
0x7f & (i).
If 'copy_dma_range_map() fails, the memory allocated for 'rvdev' will leak.
Move the 'copy_dma_range_map()' call after the device registration so
that 'rproc_rvdev_release()' can be called to free some resources.
Also, branch to the error handling path if 'copy_dma_range_map()' instead
of a direct return to avoid some other leaks.
Previously, if del_mtd_device() failed with -EBUSY due to a non-zero
usecount, a subsequent call to attempt the deletion again would try to
remove a debugfs directory that had already been removed and panic.
With this change the second call can instead proceed safely.
The condition register PCI_RCV_INTX is used in irq_mask() and irq_unmask()
callbacks. Accesses to register can occur at the same time without a lock.
Add a lock into each callback to prevent the issue.
And INTX mask and unmask fields in PCL_RCV_INTX register should only be
set/reset for each bit. Clearing by PCL_RCV_INTX_ALL_MASK should be
removed.
INTX status fields in PCL_RCV_INTX register only indicates each INTX
interrupt status, so the handler can't clear by writing 1 to the field.
The status is expected to be cleared by the interrupt origin.
The ack function has no meaning, so should remove it.
projects / linux-stable / log