When locking a region, we currently clamp to a PAGE_SIZE as the minimum
lock region. While this is valid for Midgard, it is invalid for Bifrost,
where the minimum locking size is 8x larger than the 4k page size. Add a
hardware definition for the minimum lock region size (corresponding to
KBASE_LOCK_REGION_MIN_SIZE_LOG2 in kbase) and respect it.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Tested-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210824173028.7528-4-alyssa.rosenzweig@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mali virtual addresses are 48-bit. Use a u64 instead of size_t to ensure
we can express the "lock everything" condition as ~0ULL without
overflow. This code was silently broken on any platform where a size_t
is less than 48-bits; in particular, it was broken on 32-bit armv7
platforms which remain in use with panfrost. (Mainly RK3288)
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Suggested-by: Rob Herring <robh@kernel.org> Tested-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver") Cc: <stable@vger.kernel.org> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210824173028.7528-3-alyssa.rosenzweig@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In lock_region, simplify the calculation of the region_width parameter.
This field is the size, but encoded as ceil(log2(size)) - 1.
ceil(log2(size)) may be computed directly as fls(size - 1). However, we
want to use the 64-bit versions as the amount to lock can exceed
32-bits.
This avoids undefined (and completely wrong) behaviour when locking all
memory (size ~0). In this case, the old code would "round up" ~0 to the
nearest page, overflowing to 0. Since fls(0) == 0, this would calculate
a region width of 10 + 0 = 10. But then the code would shift by
(region_width - 11) = -1. As shifting by a negative number is undefined,
UBSAN flags the bug. Of course, even if it were defined the behaviour is
wrong, instead of locking all memory almost none would get locked.
The new form of the calculation corrects this special case and avoids
the undefined behaviour.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Reported-and-tested-by: Chris Morgan <macromorgan@hotmail.com> Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver") Cc: <stable@vger.kernel.org> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210824173028.7528-2-alyssa.rosenzweig@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add safe lut configuration for all the targets in dpu
driver as per QOS recommendation.
Issue reported on SC7280:
With wait-for-safe feature in smmu enabled, RT client
buffer levels are checked to be safe before smmu invalidation.
Since display was always set to unsafe it was delaying the
invalidaiton process thus impacting the performance on NRT clients
such as eMMC and NVMe.
Validated this change on SC7280, With this change eMMC performance
has improved significantly.
Changes in v2:
- Add fixes tag (Sai)
- CC stable kernel (Dimtry)
Changes in v3:
- Correct fixes tag with appropriate hash (stephen)
- Resend patch adding reviewed by tag
- Resend patch adding correct format for pushing into stable tree (Greg)
Fixes: 591e34a091d1 ("drm/msm/disp/dpu1: add support for display for SC7280 target") Cc: stable@vger.kernel.org Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> (sc7280, sc7180) Link: https://lore.kernel.org/r/1628070028-2616-1-git-send-email-kalyan_t@codeaurora.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jobs can be in-flight when the file descriptor is closed (either because
the process did not terminate properly, or because it didn't wait for
all GPU jobs to be finished), and apparently panfrost_job_close() does
not cancel already running jobs. Let's refcount the MMU context object
so it's lifetime is no longer bound to the FD lifetime and running jobs
can finish properly without generating spurious page faults.
Reported-by: Icecream95 <ixn@keemail.me> Fixes: 7282f7645d06 ("drm/panfrost: Implement per FD address spaces") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210621133907.1683899-2-boris.brezillon@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 2f015ec6eab6 ("drm/dp_mst: Add sideband down request tracing +
selftests") added some debug code for sideband message tracing. But
it seems to have unintentionally changed the behavior on sideband message
failure. It catches and returns failure only if DRM_UT_DP is enabled.
Otherwise it ignores the error code and returns success. So on an MST
unplug, the caller is unaware that the clear payload message failed and
ends up waiting for 4 seconds for the response. Fixes the issue by
returning the proper error code.
Changes in V2:
-- Revise commit text as review comment
-- add Fixes text
Changes in V3:
-- remove "unlikely" optimization
Fixes: 2f015ec6eab6 ("drm/dp_mst: Add sideband down request tracing + selftests") Cc: <stable@vger.kernel.org> # v5.5+ Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1625585434-9562-1-git-send-email-khsieh@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Put the clock-selection code into each of the PLL-update functions to
make them select the correct pixel clock. Instead of copying the code,
introduce a new helper WREG_MISC_MASKED, which does masked writes into
<MISC>. Use it from each individual PLL update function.
The pixel clock for video output was not actually set before programming
the clock's values. It worked because the device had the correct clock
pre-set.
v2:
* don't duplicate <MISC> update code (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: db05f8d3dc87 ("drm/mgag200: Split MISC register update into PLL selection, SYNC and I/O") Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.9+ Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-2-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tx_done is not used for napi_complete_done(). Thus, NAPI busy polling
mechanism by gro_flush_timeout and napi_defer_hard_irqs will not able
be triggered after a packet is transmitted when there is no receive
packet.
Fix this by taking the maximum value between tx_done and rx_done as
overall budget completed by the rxtx NAPI poll to ensure XDP Tx ZC
operation is continuously polling for next Tx frame. This gives
benefit of lower packet submission processing latency and jitter
under XDP Tx ZC mode.
Performance of tx-only using xdp-sock on Intel ADL-S platform is
the same with and without this patch.
Currently, outgoing packets larger than 1496 bytes are dropped when
tagged VLAN is used on a switch port.
Add the frame check sequence length to the value of the register
GSWIP_MAC_FLEN to fix this. This matches the lantiq_ppa vendor driver,
which uses a value consisting of 1518 bytes for the MAC frame, plus the
lengths of special tag and VLAN tags.
Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Cc: stable@vger.kernel.org Signed-off-by: Jan Hoffmann <jan@3e8.eu> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The static initializer test got accidentally converted to a dynamic
initializer. Fix this and retain the giant padding hole without using
an aligned struct member.
Sometimes kernel is trying to probe Fingerprint MCU (FPMCU) when it
hasn't initialized SPI yet. This can happen because FPMCU is restarted
during system boot and kernel can send message in short window
eg. between sysjump to RW and SPI initialization.
Commit 5d097056c9a0 ("kmemcg: account certain kmem allocations to memcg")
enabled memcg accounting for pids allocated from init_pid_ns.pid_cachep,
but forgot to adjust the setting for nested pid namespaces. As a result,
pid memory is not accounted exactly where it is really needed, inside
memcg-limited containers with their own pid namespaces.
Pid was one the first kernel objects enabled for memcg accounting.
init_pid_ns.pid_cachep marked by SLAB_ACCOUNT and we can expect that any
new pids in the system are memcg-accounted.
Though recently I've noticed that it is wrong. nested pid namespaces
creates own slab caches for pid objects, nested pids have increased size
because contain id both for all parent and for own pid namespaces. The
problem is that these slab caches are _NOT_ marked by SLAB_ACCOUNT, as a
result any pids allocated in nested pid namespaces are not
memcg-accounted.
Pid struct in nested pid namespace consumes up to 500 bytes memory, 100000
such objects gives us up to ~50Mb unaccounted memory, this allow container
to exceed assigned memcg limits.
Link: https://lkml.kernel.org/r/8b6de616-fd1a-02c6-cbdb-976ecdcfa604@virtuozzo.com Fixes: 5d097056c9a0 ("kmemcg: account certain kmem allocations to memcg") Cc: stable@vger.kernel.org Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Reviewed-by: Michal Koutný <mkoutny@suse.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit f56ce412a59d ("mm: memcontrol: fix occasional OOMs due to
proportional memory.low reclaim") introduced a divide by zero corner
case when oomd is being used in combination with cgroup memory.low
protection.
When oomd decides to kill a cgroup, it will force the cgroup memory to
be reclaimed after killing the tasks, by writing to the memory.max file
for that cgroup, forcing the remaining page cache and reclaimable slab
to be reclaimed down to zero.
Previously, on cgroups with some memory.low protection that would result
in the memory being reclaimed down to the memory.low limit, or likely
not at all, having the page cache reclaimed asynchronously later.
With f56ce412a59d the oomd write to memory.max tries to reclaim all the
way down to zero, which may race with another reclaimer, to the point of
ending up with the divide by zero below.
This patch implements the obvious fix.
Link: https://lkml.kernel.org/r/20210826220149.058089c6@imladris.surriel.com Fixes: f56ce412a59d ("mm: memcontrol: fix occasional OOMs due to proportional memory.low reclaim") Signed-off-by: Rik van Riel <riel@surriel.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Chris Down <chris@chrisdown.name> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After fork, the child process will get incorrect (2x) hugetlb_usage. If
a process uses 5 2MB hugetlb pages in an anonymous mapping,
HugetlbPages: 10240 kB
and then forks, the child will show,
HugetlbPages: 20480 kB
The reason for double the amount is because hugetlb_usage will be copied
from the parent and then increased when we copy page tables from parent
to child. Child will have 2x actual usage.
Fix this by adding hugetlb_count_init in mm_init.
Link: https://lkml.kernel.org/r/20210826071742.877-1-liuzixian4@huawei.com Fixes: 5d317b2b6536 ("mm: hugetlb: proc: add HugetlbPages field to /proc/PID/status") Signed-off-by: Liu Zixian <liuzixian4@huawei.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously, we noticed the one rpma example was failed[1] since commit 36f30e486dce ("IB/core: Improve ODP to use hmm_range_fault()"), where it
will use ODP feature to do RDMA WRITE between fsdax files.
After digging into the code, we found hmm_vma_handle_pte() will still
return EFAULT even though all the its requesting flags has been
fulfilled. That's because a DAX page will be marked as (_PAGE_SPECIAL |
PAGE_DEVMAP) by pte_mkdevmap().
Link: https://github.com/pmem/rpma/issues/1142 Link: https://lkml.kernel.org/r/20210830094232.203029-1-lizhijian@cn.fujitsu.com Fixes: 405506274922 ("mm/hmm: add missing call to hmm_pte_need_fault in HMM_PFN_SPECIAL handling") Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checkpatch complained on a follow-up patch that we are using "unsigned"
here, which defaults to "unsigned int" and checkpatch is correct.
As we will search for a fitting zone using the wrong pfn, we might end
up onlining memory to one of the special kernel zones, such as ZONE_DMA,
which can end badly as the onlined memory does not satisfy properties of
these zones.
Use "unsigned long" instead, just as we do in other places when handling
PFNs. This can bite us once we have physical addresses in the range of
multiple TB.
Link: https://lkml.kernel.org/r/20210712124052.26491-2-david@redhat.com Fixes: e5e689302633 ("mm, memory_hotplug: display allowed zones in the preferred ordering") Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: David Hildenbrand <david@redhat.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mike Rapoport <rppt@kernel.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: virtualization@lists.linux-foundation.org Cc: Andy Lutomirski <luto@kernel.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Anton Blanchard <anton@ozlabs.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Dave Jiang <dave.jiang@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: Joe Perches <joe@perches.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Michel Lespinasse <michel@lespinasse.org> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Pierre Morel <pmorel@linux.ibm.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Rich Felker <dalias@libc.org> Cc: Scott Cheloha <cheloha@linux.ibm.com> Cc: Sergei Trofimovich <slyfox@gentoo.org> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Morin reported hitting the following WARNING followed by GPF or
NULL pointer deference either in cgroups_destroy or in the kill_css path.:
percpu ref (css_release) <= 0 (-1) after switching to atomic
WARNING: CPU: 23 PID: 130 at lib/percpu-refcount.c:196 percpu_ref_switch_to_atomic_rcu+0x127/0x130
CPU: 23 PID: 130 Comm: ksoftirqd/23 Kdump: loaded Tainted: G O 5.10.60 #1
RIP: 0010:percpu_ref_switch_to_atomic_rcu+0x127/0x130
Call Trace:
rcu_core+0x30f/0x530
rcu_core_si+0xe/0x10
__do_softirq+0x103/0x2a2
run_ksoftirqd+0x2b/0x40
smpboot_thread_fn+0x11a/0x170
kthread+0x10a/0x140
ret_from_fork+0x22/0x30
Upon further examination, it was discovered that the css structure was
associated with hugetlb reservations.
For private hugetlb mappings the vma points to a reserve map that
contains a pointer to the css. At mmap time, reservations are set up
and a reference to the css is taken. This reference is dropped in the
vma close operation; hugetlb_vm_op_close. However, if a vma is split no
additional reference to the css is taken yet hugetlb_vm_op_close will be
called twice for the split vma resulting in an underflow.
Fix by taking another reference in hugetlb_vm_op_open. Note that the
reference is only taken for the owner of the reserve map. In the more
common fork case, the pointer to the reserve map is cleared for
non-owning vmas.
The cpu hotplug notifiers are called without updating the core/thread
masks when a new CPU is added. This causes problems with code setting
up data structures in a cpu hotplug notifier, and relying on that later
in normal code.
This caused a crash in the new core scheduling code (SCHED_CORE),
where rq->core was set up in a notifier depending on cpu masks.
To fix this, add a cpu_setup_mask which is used in update_cpu_masks()
instead of the cpu_online_mask to determine whether the cpu masks should
be set for a certain cpu. Also move update_cpu_masks() to update the
masks before calling notify_cpu_starting() so that the notifiers are
seeing the updated masks.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Cc: <stable@vger.kernel.org>
[hca@linux.ibm.com: get rid of cpu_online_mask handling] Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 903cd0f315fe ("swiotlb: Use is_swiotlb_force_bounce for
swiotlb data bouncing") if code sets swiotlb_force it needs to do so
before the swiotlb is initialised. Otherwise
io_tlb_default_mem->force_bounce will not get set to true, and devices
that use (the default) swiotlb will not bounce despite switolb_force
having the value of SWIOTLB_FORCE.
Let us restore swiotlb functionality for PV by fulfilling this new
requirement.
This change addresses what turned out to be a fragility in
commit 64e1f0c531d1 ("s390/mm: force swiotlb for protected
virtualization"), which ain't exactly broken in its original context,
but could give us some more headache if people backport the broken
change and forget this fix.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Fixes: 903cd0f315fe ("swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing") Fixes: 64e1f0c531d1 ("s390/mm: force swiotlb for protected virtualization") Cc: stable@vger.kernel.org #5.3+ Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the numa=off kernel command-line configuration init_chip_info() loops
around the number of chips and attempts to copy the cpumask of that node
which is NULL for all iterations after the first chip.
Hence, store the cpu mask for each chip instead of derving cpumask from
node while populating the "chips" struct array and copy that to the
chips[i].mask
Fixes: 053819e0bf84 ("cpufreq: powernv: Handle throttling due to Pmax capping at chip level") Cc: stable@vger.kernel.org # v4.3+ Reported-by: Shirisha Ganta <shirisha.ganta1@ibm.com> Signed-off-by: Pratik R. Sampat <psampat@linux.ibm.com> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
[mpe: Rename goto label to out_free_chip_cpu_mask] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210728120500.87549-2-psampat@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the alloc_queue callback driver checks the map, if queue is already
allocated:
ha->queue_pair_map[qidx]
This works fine as long as max_qpairs is greater than nvme_max_hw_queues(8)
since the size of the queue_pair_map is equal to max_qpair. In case nr_cpus
is less than 8, max_qpairs is less than 8. This creates wrong value
returned as qpair.
Also diagnostic output such as with the BusLogic=TraceConfiguration
parameter is affected and becomes vertical and therefore hard to read.
This has now been corrected, e.g.:
If function ovl_instantiate() returns an error, ovl_cleanup will be called
and try to remove newdentry from wdir, but the newdentry has been moved to
udir at this time. This will causes BUG_ON(victim->d_parent->d_inode !=
dir) in fs/namei.c:may_delete.
Signed-off-by: chenying <chenying.kernel@bytedance.com> Fixes: 01b39dcc9568 ("ovl: use inode_insert5() to hash a newly created inode") Link: https://lore.kernel.org/linux-unionfs/e6496a94-a161-dc04-c38a-d2544633acb4@bytedance.com/ Cc: <stable@vger.kernel.org> # v4.18 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The standard printk() tries to flush the message to the console
immediately. It tries to take the console lock. If the lock is
already taken then the current owner is responsible for flushing
even the new message.
There is a small race window between checking whether a new message is
available and releasing the console lock. It is solved by re-checking
the state after releasing the console lock. If the check is positive
then console_unlock() tries to take the lock again and process the new
message as well.
The commit 996e966640ddea7b535c ("printk: remove logbuf_lock") causes that
console_seq is not longer read atomically. As a result, the re-check might
be done with an inconsistent 64-bit index.
Solve it by using the last sequence number that has been checked under
the console lock. In the worst case, it will take the lock again only
to realized that the new message has already been proceed. But it
was possible even before.
The variable next_seq is marked as __maybe_unused to call down compiler
warning when CONFIG_PRINTK is not defined.
Commit 23243c1ace9f ("arch: use cross_compiling to check whether it is
a cross build or not") broke 64-bit parisc builds on 32-bit parisc
systems.
Helge mentioned:
- 64-bit parisc userspace is not supported yet [1]
- hppa gcc does not support "-m64" flag [2]
That means, parisc developers working on a 32-bit parisc machine need
to use hppa64-linux-gnu-gcc (cross compiler) for building the 64-bit
parisc kernel.
After the offending commit, gcc is used in such a case because
both $(SRCARCH) and $(SUBARCH) are 'parisc', hence cross_compiling is
unset.
A correct way is to introduce ARCH=parisc64 because building the 64-bit
parisc kernel on a 32-bit parisc system is not exactly a native build,
but rather a semi-cross build.
Fixes: 23243c1ace9f ("arch: use cross_compiling to check whether it is a cross build or not") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reported-by: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee> Cc: <stable@vger.kernel.org> # v5.13+ Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I was debugging some crashes on parisc and I found out that there is a
crash possibility if a function using alloca is interrupted by a signal.
The reason for the crash is that the gcc alloca implementation leaves
garbage in the upper 32 bits of the sp register. This normally doesn't
matter (the upper bits are ignored because the PSW W-bit is clear),
however the signal delivery routine in the kernel uses full 64 bits of sp
and it fails with -EFAULT if the upper 32 bits are not zero.
I created this program that demonstrates the problem:
abs() returns signed long, which could not convert the type
as unsigned, and it may cause a mismatch type warning from
static tools. To fix it, this patch uses an variable to save
the abs()'s result and does a explicit conversion.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot report an array-index-out-of-bounds in taprio_change
index 16 is out of range for type '__u16 [16]'
that's because mqprio->num_tc is lager than TC_MAX_QUEUE,so we check
the return value of netdev_set_num_tc.
Reported-by: syzbot+2b3e5fb6c7ef285a94f6@syzkaller.appspotmail.com Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
This is because in cipso_v4_doi_free() there is no check
on 'doi_def->map.std' when 'doi_def->type' equal 1, which
is possibe, since netlbl_cipsov4_add_std() haven't initialize
it before alloc 'doi_def->map.std'.
This patch just add the check to prevent panic happen for similar
cases.
Reported-by: Abaci <abaci@linux.alibaba.com> Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Bad header can have large length field which can cause OOB.
cptr is the last bytes for read, and the eeprom is parsed
from high to low address. The OOB, triggered by the condition
length > cptr could cause memory error with a read on
negative index.
There are some sanity check around length, but it is not
compared with cptr (the remaining bytes). Here, the
corrupted/bad EEPROM can cause panic.
I was able to reproduce the crash, but I cannot find the
log and the reproducer now. After I applied the patch, the
bug is no longer reproducible.
When receiving a beacon or probe response, we should update the
boottime_ns field which is the timestamp the frame was received at.
(cf mac80211.h)
This fixes a scanning issue with Android since it relies on this
timestamp to determine when the AP has been seen for the last time
(via the nl80211 BSS_LAST_SEEN_BOOTTIME parameter).
The check for count appears to be incorrect since a non-zero count
check occurs a couple of statements earlier. Currently the check is
always false and the dev->port->irq != PARPORT_IRQ_NONE part of the
check is never tested and the if statement is dead-code. Fix this
by removing the check on count.
Note that this code is pre-git history, so I can't find a sha for
it.
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Logically dead code") Link: https://lore.kernel.org/r/20210730100710.27405-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Under high stress, SW steering might get stuck on polling for completion
that never comes.
For such cases QP needs to have protocol retransmission mechanism enabled.
Currently the retransmission timeout is defined as 0 (unlimited). Fix this
by defining a real timeout.
In commit 79f033f6f229 ("iwlwifi: dbg: don't limit dump decisions
to all or monitor") we changed the code to pass around a bitmap,
but in the monitor_only case, one place accidentally used the bit
number, not the bit mask, resulting in CSR and FW_INFO getting
dumped instead of monitor data. Fix that.
Both 'iwl_scan_probe_params_v3' and 'iwl_scan_probe_params_v4'
wrongly addressed the 'bssid_array' field which should supposed
to be any array of BSSIDs each of size ETH_ALEN and not the
opposite. Fix it.
When TVQM is enabled (iwl_mvm_has_new_tx_api() is true), then
queue numbers are just sequentially assigned 0, 1, 2, ...
Prior to TVQM, in DQA, there were some statically allocated
queue numbers:
* IWL_MVM_DQA_AUX_QUEUE == 1,
* both IWL_MVM_DQA_INJECT_MONITOR_QUEUE and
IWL_MVM_DQA_P2P_DEVICE_QUEUE == 2, and
* IWL_MVM_DQA_AP_PROBE_RESP_QUEUE == 9.
Now, these values are assigned to the members mvm->aux_queue,
mvm->snif_queue, mvm->probe_queue and mvm->p2p_dev_queue by
default. Normally, this doesn't really matter, and if TVQM is
in fact available we override them to the real values after
allocating a queue for use there.
However, this allocation doesn't always happen. For example,
for mvm->p2p_dev_queue (== 2) it only happens when the P2P
Device interface is started, if any. If it's not started, the
value in mvm->p2p_dev_queue remains 2. This wouldn't really
matter all that much if it weren't for iwl_mvm_is_static_queue()
which checks a queue number against one of those four static
numbers.
Now, if no P2P Device or monitor interface is added then queue
2 may be dynamically allocated, yet alias mvm->p2p_dev_queue or
mvm->snif_queue, and thus iwl_mvm_is_static_queue() erroneously
returns true for it. If it then gets full, all interface queues
are stopped, instead of just backpressuring against the one TXQ
that's really the only affected one.
This clearly can lead to issues, as everything is stopped even
if just a single TXQ filled its corresponding HW queue, if it
happens to have an appropriate number (2 or 9, AUX is always
reassigned.) Due to a mac80211 bug, this also led to a situation
in which the queues remained stopped across a deauthentication
and then attempts to connect to a new AP started failing, but
that's fixed separately.
Fix all of this by simply initializing the queue numbers to
the invalid value until they're used, if TVQM is enabled, and
also setting them back to that value when the queues are later
freed again.
The scan request processing populated the direct SSIDs
in the FW scan request command also for 6GHz scan, which is not
needed and might result in unexpected behavior.
Fix the code to add the direct SSIDs only in case the scan
is not a 6GHz scan.
When switching op-modes, or more generally when reconfiguring,
we might switch the RB size. In _iwl_pcie_rx_init() we have a
comment saying we must free all RBs since we might switch the
size, but this is actually too late: the switch has been done
and we'll free the buffers with the wrong size.
Fix this by always freeing the buffers, if any, at the start
of configure, instead of only after the size may have changed.
NFS implements blocking locks by blocking inside its lock method. In
the reexport case, this blocks the nfs server thread, which could lead
to deadlocks since an nfs server thread might be required to unlock the
conflicting lock. It also causes a crash, since the nfs server thread
assumes it can free the lock when its lm_notify lock callback is called.
Ideal would be to make the nfs lock method return without blocking in
this case, but for now it works just not to attempt blocking locks. The
difference is just that the original client will have to poll (as it
does in the v4.0 case) instead of getting a callback when the lock's
available.
Signed-off-by: J. Bruce Fields <bfields@redhat.com> Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On systems with multiple SH per SE compute_static_thread_mgmt_se#
is split into independent masks, one for each SH, in the upper and
lower 16 bits. We need to detect this and apply cu masking to each
SH. The cu mask bits are assigned first to each SE, then to
alternate SHs, then finally to higher CU id. This ensures that
the maximum number of SPIs are engaged as early as possible while
balancing CU assignment to each SH.
v2: Use max SH/SE rather than max SH in cu_per_sh.
v3: Fix comment blocks, ensure se_mask is initially zero filled,
and correctly assign se.sh.cu positions to unset bits in cu_mask.
Signed-off-by: Sean Keely <Sean.Keely@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When more than one FE is connected to a BE, e.g. in a mixing use case,
the BE can be triggered multiple times when the FE are opened/started
concurrently. This race condition is problematic in the case of
SoundWire BE dailinks, and this is not desirable in a general
case. The code carefully checks when the BE can be stopped or
hw_free'ed, but the trigger code does not use any mutual exclusion.
Fix by using the same spinlock already used to check FE states, and
set the state before the trigger. In case of errors, the initial
state will be restored.
This patch does not change how the triggers are handled, it only makes
sure the states are handled in critical sections.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Message-Id: <20210817164054.250028-2-pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a remote usb device is attached to the local Virtual USB
Host Controller Root Hub port, the bound device driver may send
a port reset command.
vhci_hcd accepts port resets only when the device doesn't have
port address assigned to it. When reset happens device is in
assigned/used state and vhci_hcd rejects it leaving the port in
a stuck state.
This problem was found when a blue-tooth or xbox wireless dongle
was passed through using usbip.
A few drivers reset the port during probe including mt76 driver
specific to this bug report. Fix the problem with a change to
honor reset requests when device is in used state (VDEV_ST_USED).
Reported-and-tested-by: Michael <msbroadf@gmail.com> Suggested-by: Michael <msbroadf@gmail.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20210819225937.41037-1-skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In vhci_device_unlink_cleanup(), the URBs for unsent unlink requests are
not given back. This sometimes causes usb_kill_urb to wait indefinitely
for that urb to be given back. syzbot has reported a hung task issue [1]
for this.
To fix this, give back the urbs corresponding to unsent unlink requests
(unlink_tx list) similar to how urbs corresponding to unanswered unlink
requests (unlink_rx list) are given back.
If IRQ occurs between calling dsps_setup_optional_vbus_irq()
and dsps_create_musb_pdev(), then null pointer dereference occurs
since glue->musb wasn't initialized yet.
The patch puts initializing of neccesery data before registration
of the interrupt handler.
Found by Linux Driver Verification project (linuxtesting.org).
If IRQ occurs between calling devm_request_threaded_irq() and
initializing dwc3_imx->dwc3, then null pointer dereference occurs
since dwc3_imx->dwc3 is used in dwc3_imx8mp_interrupt().
The patch puts registration of the interrupt handler after
initializing of neccesery data.
Found by Linux Driver Verification project (linuxtesting.org).
That commit effectively disabled Intel host initiated U1/U2 lpm for devices
with periodic endpoints.
Before that commit we disabled host initiated U1/U2 lpm if the exit latency
was larger than any periodic endpoint service interval, this is according
to xhci spec xhci 1.1 specification section 4.23.5.2
After that commit we incorrectly checked that service interval was smaller
than U1/U2 inactivity timeout. This is not relevant, and can't happen for
Intel hosts as previously set U1/U2 timeout = 105% * service interval.
Patch claimed it solved cases where devices can't be enumerated because of
bandwidth issues. This might be true but it's a side effect of accidentally
turning off lpm.
exit latency calculations have been revised since then
smb_buf is allocated by small_smb_init_no_tc(), and buf type is
CIFS_SMALL_BUFFER, so we should use cifs_small_buf_release() to
release it in failed path.
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The reason why it doesn't print the execution result when the program is
terminated usually is that sample03 doesn't call the function which
prints the result, unlike other samples.
So, this commit solves this issue by calling the function before
termination. Also, this commit changes control_c function to
print_result to maintain consistency with other samples.
Signed-off-by: Juhee Kang <claudiajkang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a read/write command is sent via ioctl to the kernel,
and the command fails, the actual error response of the emmc
is not sent to the user.
IOCTL read/write tests are carried out using commands
17 (Single BLock Read), 24 (Single Block Write),
18 (Multi Block Read), 25 (Multi Block Write)
The tests are carried out on a 64Gb emmc device. All of these
tests try to access an "out of range" sector address (0x09B2FFFF).
It is seen that without the patch the response received by the user
is not OUT_OF_RANGE error (R1 response 31st bit is not set) as per
JEDEC specification. After applying the patch proper response is seen.
This is because the function returns without copying the response to
the user in case of failure. This patch fixes the issue.
Hence, this memcpy is required whether we get an error response or not.
Therefor it is moved up from the current position up to immediately
after we have called mmc_wait_for_req().
The test code and the output of only the CMD17 is included in the
commit to limit the message length.
0Day robot observed that it's easily timeout on a heavy load host.
-------------------
# selftests: bpf: test_maps
# Fork 1024 tasks to 'test_update_delete'
# Fork 1024 tasks to 'test_update_delete'
# Fork 100 tasks to 'test_hashmap'
# Fork 100 tasks to 'test_hashmap_percpu'
# Fork 100 tasks to 'test_hashmap_sizes'
# Fork 100 tasks to 'test_hashmap_walk'
# Fork 100 tasks to 'test_arraymap'
# Fork 100 tasks to 'test_arraymap_percpu'
# Failed sockmap unexpected timeout
not ok 3 selftests: bpf: test_maps # exit=1
# selftests: bpf: test_lru_map
# nr_cpus:8
-------------------
Since this test will be scheduled by 0Day to a random host that could have
only a few cpus(2-8), enlarge the timeout to avoid a false NG report.
In practice, i tried to pin it to only one cpu by 'taskset 0x01 ./test_maps',
and knew 10S is likely enough, but i still perfer to a larger value 30.
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20210820015556.23276-2-lizhijian@cn.fujitsu.com Signed-off-by: Sasha Levin <sashal@kernel.org>
For unexplained reasons, the prescaler register for this device needs to
be cleared (set to 1) while performing a data read or else the command
will hang. This does not appear to affect the real clock rate sent out
on the bus, so I assume it's purely to work around a hardware bug.
During normal operation, the prescaler is already set to 1, so nothing
needs to be done. However, in "initial mode" (which is used for sub-MHz
clock speeds, like the core sets while enumerating cards), it's set to
128 and so we need to reset it during data reads. We currently fail to
do this for long reads.
This has no functional affect on the driver's operation currently
written, as the MMC core always sets a clock above 1MHz before
attempting any long reads. However, the core could conceivably set any
clock speed at any time and the driver should still work, so I think
this fix is worthwhile.
I personally encountered this issue while performing data recovery on an
external chip. My connections had poor signal integrity, so I modified
the core code to reduce the clock speed. Without this change, I saw the
card enumerate but was unable to actually read any data.
Writes don't seem to work in the situation described above even with
this change (and even if the workaround is extended to encompass data
write commands). I was not able to find a way to get them working.
At a couple of places, the return values of the non-void functions were
not getting checked. This was reported by the coverity tool. Modify the
code to check the return values of the same.
SD standard speed timing was met only at 19MHz and not 25 MHz, that's
why changing driver to 19MHz. The reason for this is when a level shifter
is used on the board, timing was met for standard speed only at 19MHz.
Since this level shifter is commonly required for high speed modes,
the driver is modified to use standard speed of 19Mhz.
skl_get_module_info() tries to set mconfig->module->loadable before
mconfig->module has been assigned thus flag was always set to false
and driver did not try to load module binaries.
KeyPhrasebuffer, Mixin and Mixout modules configuration is described by
firmware's basic module configuration structure. There are no extended
parameters required. Update functions taking part in building
INIT_INSTANCE IPC payload to reflect that.
The power down sequence sets the link_up flag as false outside of the
mutex_lock. This is potentially unsafe.
In additional the flow in that sequence can be improved by first
testing if the link was powered, setting the link_up flag as false and
proceeding with the power down. In case the CPA bits cannot be
cleared, we only flag an error since we cannot deal with interrupts
any longer.
Function btrfs_lookup_data_extent calls btrfs_search_slot to verify if
the EXTENT_ITEM exists in the extent tree. btrfs_search_slot can return
values bellow zero if an error happened.
Function replay_one_extent currently checks if the search found
something (0 returned) and increments the reference, and if not, it
seems to evaluate as 'not found'.
Fix the condition by checking if the value was bellow zero and return
early.
Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When using the NO_HOLES feature and expanding the size of an inode, we
update the inode's last_trans, last_sub_trans and last_log_commit fields
at maybe_insert_hole() so that a fsync does know that the inode needs to
be logged (by making sure that btrfs_inode_in_log() returns false). This
happens for expanding truncate operations, buffered writes, direct IO
writes and when cloning extents to an offset greater than the inode's
i_size.
However the way we do it is racy, because in between setting the inode's
last_sub_trans and last_log_commit fields, the log transaction ID that was
assigned to last_sub_trans might be committed before we read the root's
last_log_commit and assign that value to last_log_commit. If that happens
it would make a future call to btrfs_inode_in_log() return true. This is
a race that should be extremely unlikely to be hit in practice, and it is
the same that was described by commit bc0939fcfab0d7 ("btrfs: fix race
between marking inode needs to be logged and log syncing").
The fix would simply be to set last_log_commit to the value we assigned
to last_sub_trans minus 1, like it was done in that commit. However
updating these two fields plus the last_trans field is pointless here
because all the callers of btrfs_cont_expand() (which is the only
caller of maybe_insert_hole()) always call btrfs_set_inode_last_trans()
or btrfs_update_inode() after calling btrfs_cont_expand(). Calling either
btrfs_set_inode_last_trans() or btrfs_update_inode() guarantees that the
next fsync will log the inode, as it makes btrfs_inode_in_log() return
false.
So just remove the code that explicitly sets the inode's last_trans,
last_sub_trans and last_log_commit fields.
Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
> Hi Arnd,
>
> First bad commit (maybe != root cause):
>
> tree: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master
> head: 2f73937c9aa561e2082839bc1a8efaac75d6e244
> commit: 47fd22f2b84765a2f7e3f150282497b902624547 [4771/5318] cs89x0: rework driver configuration
> config: m68k-randconfig-c003-20210804 (attached as .config)
> compiler: m68k-linux-gcc (GCC) 10.3.0
> reproduce (this is a W=1 build):
> wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> chmod +x ~/bin/make.cross
> # https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=47fd22f2b84765a2f7e3f150282497b902624547
> git remote add linux-next https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
> git fetch --no-tags linux-next master
> git checkout 47fd22f2b84765a2f7e3f150282497b902624547
> # save the attached .config to linux build tree
> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-10.3.0 make.cross ARCH=m68k
>
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>
>
> All errors (new ones prefixed by >>):
>
> In file included from include/linux/kernel.h:19,
> from include/linux/list.h:9,
> from include/linux/module.h:12,
> from drivers/net/ethernet/cirrus/cs89x0.c:51:
> drivers/net/ethernet/cirrus/cs89x0.c: In function 'net_open':
> drivers/net/ethernet/cirrus/cs89x0.c:897:20: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration]
> 897 | (unsigned long)isa_virt_to_bus(lp->dma_buff));
> | ^~~~~~~~~~~~~~~
> include/linux/printk.h:141:17: note: in definition of macro 'no_printk'
> 141 | printk(fmt, ##__VA_ARGS__); \
> | ^~~~~~~~~~~
> drivers/net/ethernet/cirrus/cs89x0.c:86:3: note: in expansion of macro 'pr_debug'
> 86 | pr_##level(fmt, ##__VA_ARGS__); \
> | ^~~
> drivers/net/ethernet/cirrus/cs89x0.c:894:3: note: in expansion of macro 'cs89_dbg'
> 894 | cs89_dbg(1, debug, "%s: dma %lx %lx\n",
> | ^~~~~~~~
> >> drivers/net/ethernet/cirrus/cs89x0.c:914:3: error: implicit declaration of function 'disable_dma'; did you mean 'disable_irq'? [-Werror=implicit-function-declaration]
As far as I can tell, this is a bug with the m68kmmu architecture, not
with my driver:
The CONFIG_ISA_DMA_API option is provided for coldfire, which implements it,
but dragonball also sets the option as a side-effect, without actually
implementing
the interfaces. The patch below should fix it.
'bp_ena' in Aura context is NIX block index, setting it
zero will always backpressure NIX0 block, even if NIXLF
belongs to NIX1. Hence fix this by setting it appropriately
based on NIX block address.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Current flow will lead to null ptr access because of trying
to get the size of freed probe-request packets. We store the
information of packet size into rsvd page instead and also fix
the size error issue, which will cause unstable behavoir of
sending probe request by wow firmware.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210728014335.8785-6-pkshih@realtek.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The kernel test robot reports undefined reference after we report wakeup
reason to mac80211. This is because CONFIG_PM is not defined in the testing
configuration file. In fact, functions within wow.c are used if CONFIG_PM
is defined, so use CONFIG_PM to decide whether we build this file or not.
The reported messages are:
hppa-linux-ld: drivers/net/wireless/realtek/rtw88/wow.o: in function `rtw_wow_show_wakeup_reason':
>> (.text+0x6c4): undefined reference to `ieee80211_report_wowlan_wakeup'
>> hppa-linux-ld: (.text+0x6e0): undefined reference to `ieee80211_report_wowlan_wakeup'
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210728014335.8785-4-pkshih@realtek.com Signed-off-by: Sasha Levin <sashal@kernel.org>
In current wow flow, driver calls rtw_wow_fw_start and sleep for 100ms,
to wait firmware finish preliminary work and then update the value of
WOWLAN_WAKE_REASON register to zero. But later firmware will start wow
function with power-saving mode, in which mode the value of
WOWLAN_WAKE_REASON register is 0xea. So driver may get 0xea value and
return fail. We use read_poll_timeout instead to check the value to avoid
this issue.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210728014335.8785-2-pkshih@realtek.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The TX A-MPDU aggregation is not handled in the driver since the
ieee80211_start_tx_ba_session has never been started properly.
Start and stop the TX BA session by tracking the TX aggregation
status of each TID. Fix the ampdu_action and the tx descriptor
accordingly with the given TID.
drivers/gpu/drm/exynos/exynos_drm_dma.c:121:19: warning: variable
'mapping' is uninitialized when used here [-Wuninitialized]
priv->mapping = mapping;
^~~~~~~
drivers/gpu/drm/exynos/exynos_drm_dma.c:111:16: note: initialize the
variable 'mapping' to silence this warning
void *mapping;
^
= NULL
1 warning generated.
This occurs when CONFIG_EXYNOS_IOMMU is enabled and both
CONFIG_ARM_DMA_USE_IOMMU and CONFIG_IOMMU_DMA are disabled, which makes
the code look like
void *mapping;
if (0)
mapping = arm_iommu_create_mapping()
else if (0)
mapping = iommu_get_domain_for_dev()
...
priv->mapping = mapping;
Add an else branch that initializes mapping to the -ENODEV error pointer
so that there is no more warning and the driver does not change during
runtime.
Locks have two sets of op arrays, fl_lmops for the lock manager (lockd
or nfsd), fl_ops for the filesystem. The server-side lockd code has
been setting its own fl_ops, which leads to confusion (and crashes) in
the reexport case, where the filesystem expects to be the only one
setting fl_ops.
And there's no reason for it that I can see-the lm_get/put_owner ops do
the same job.
Reported-by: Daire Byrne <daire@dneg.com> Tested-by: Daire Byrne <daire@dneg.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If wIndex is 0 (and it often is), these calculations underflow and
UBSAN complains, here resolve this by not decrementing the index when
it is equal to 0, this copies the solution from commit 85e3990bea49
("USB: EHCI: avoid undefined pointer arithmetic and placate UBSAN")
In the gfs2 withdraw sequence, the dlm protocol is unmounted with a call
to lm_unmount. After a withdraw, users are allowed to unmount the
withdrawn file system. But at that point we may still have glocks left
over that we need to free via unmount's call to gfs2_gl_hash_clear.
These glocks may have never been completed because of whatever problem
caused the withdraw (IO errors or whatever).
Before this patch, function gdlm_put_lock would still try to call into
dlm to unlock these leftover glocks, which resulted in dlm returning
-EINVAL because the lock space was abandoned. These glocks were never
freed because there was no mechanism after that to free them.
This patch adds a check to gdlm_put_lock to see if the locking protocol
was inactive (DFL_UNMOUNT flag) and if so, free the glock and not
make the invalid call into dlm.
I could have combined this "if" with the one that follows, related to
leftover glock LVBs, but I felt the code was more readable with its own
if clause.
Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The PAC tests check to see if the system supports the relevant PAC features
but instead of skipping the tests if they can't be executed they fail the
tests which makes things look like they're not working when they are.
When skipping the tests due to a lack of system support for MTE we
currently print a message saying FAIL which makes it look like the test
failed even though the test did actually report KSFT_SKIP, creating some
confusion. Change the error message to say SKIP instead so things are
clearer.
Currently, when creating an ingress qdisc on an indirect device before
the driver registered for callbacks, the driver will not have a chance
to register its filter configuration callbacks.
To fix that, modify the code such that it keeps track of all the ingress
qdiscs that call flow_indr_dev_setup_offload(). When a driver calls
flow_indr_dev_register(), go through the list of tracked ingress qdiscs
and call the driver callback entry point so as to give it a chance to
register its callback.
Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Eli Cohen <elic@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
memcpy should be executed only in case nla_len's value is greater than 0.
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
nlattr could have a padding for 4 bytes alignment. So next nla's offset
should be calculated with a padding.
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix buf allocation size (it needs to be 2 bytes larger). Found when
__alloc_size() annotations were added to kmalloc() interfaces.
In file included from ./include/linux/string.h:253,
from ./include/linux/bitmap.h:10,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/paravirt.h:17,
from ./arch/x86/include/asm/irqflags.h:63,
from ./include/linux/irqflags.h:16,
from ./include/linux/rcupdate.h:26,
from ./include/linux/rculist.h:11,
from ./include/linux/pid.h:5,
from ./include/linux/sched.h:14,
from ./include/linux/blkdev.h:5,
from drivers/staging/rts5208/rtsx_scsi.c:12:
In function 'get_ms_information',
inlined from 'ms_sp_cmnd' at drivers/staging/rts5208/rtsx_scsi.c:2877:12,
inlined from 'rtsx_scsi_handler' at drivers/staging/rts5208/rtsx_scsi.c:3247:12:
./include/linux/fortify-string.h:54:29: warning: '__builtin_memcpy' forming offset [106, 107] is out
of the bounds [0, 106] [-Warray-bounds]
54 | #define __underlying_memcpy __builtin_memcpy
| ^
./include/linux/fortify-string.h:417:2: note: in expansion of macro '__underlying_memcpy'
417 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
./include/linux/fortify-string.h:463:26: note: in expansion of macro '__fortify_memcpy_chk'
463 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
drivers/staging/rts5208/rtsx_scsi.c:2851:3: note: in expansion of macro 'memcpy'
2851 | memcpy(buf + i, ms_card->raw_sys_info, 96);
| ^~~~~~
When doing a PMBus write for the LED control on the IBM Common Form
Factor Power Supplies (ibm-cffps), the DAh command requires that bit 7
be low and bit 6 be high in order to indicate that you are truly
attempting to do a write.
libbpf CI has reported send_signal test is flaky although
I am not able to reproduce it in my local environment.
But I am able to reproduce with on-demand libbpf CI ([1]).
Through code analysis, the following is possible reason.
The failed subtest runs bpf program in softirq environment.
Since bpf_send_signal() only sends to a fork of "test_progs"
process. If the underlying current task is
not "test_progs", bpf_send_signal() will not be triggered
and the subtest will fail.
To reduce the chances where the underlying process is not
the intended one, this patch boosted scheduling priority to
-20 (highest allowed by setpriority() call). And I did
10 runs with on-demand libbpf CI with this patch and I
didn't observe any failures.
In skip_account(), test->skip_cnt is set to 0 at the end, this makes next print
statement never display SKIP status for the subtest. This patch moves the
accounting logic after the print statement, fixing the issue.
This patch also added SKIP status display for normal tests.
As follow-up to the discussion with Jakub Kicinski about iavf locking
being insufficient [1] convert iavf to use mutexes instead of bitops.
The locking logic is kept as is, just a drop-in replacement of
enum iavf_critical_section_t with separate mutexes.
The only difference is that the mutexes will be destroyed before the
module is unloaded.
projects / linux-stable / log