This change causes regression when eDP and external display in mirror
mode. When external display supports low resolution than eDP, use eDP
timing to driver external display may cause corruption on external
display.
The change to eth_hw_addr_set() caused gcc to correctly spot a
bug that was introduced in an earlier incorrect fix:
In file included from include/linux/etherdevice.h:21,
from drivers/net/ethernet/ni/nixge.c:7:
In function '__dev_addr_set',
inlined from 'eth_hw_addr_set' at include/linux/etherdevice.h:319:2,
inlined from 'nixge_probe' at drivers/net/ethernet/ni/nixge.c:1286:3:
include/linux/netdevice.h:4648:9: error: 'memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]
4648 | memcpy(dev->dev_addr, addr, len);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
As nixge_get_nvmem_address() can return either NULL or an error
pointer, the NULL check is wrong, and we can end up reading from
ERR_PTR(-EOPNOTSUPP), which gcc knows to contain zero readable
bytes.
Make the function always return an error pointer again but fix
the check to match that.
Fixes: f3956ebb3bf0 ("ethernet: use eth_hw_addr_set() instead of ether_addr_copy()") Fixes: abcd3d6fc640 ("net: nixge: Fix error path for obtaining mac address") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 6018b585e8c6 ("tracing/histograms: Add histograms to hist_vars if
they have referenced variables") added a check to fail histogram creation
if save_hist_vars() failed to add histogram to hist_vars list. But the
commit failed to set ret to failed return code before jumping to
unregister histogram, fix it.
Link: https://lore.kernel.org/linux-trace-kernel/20230714203341.51396-1-mkhalfella@purestorage.com Cc: stable@vger.kernel.org Fixes: 6018b585e8c6 ("tracing/histograms: Add histograms to hist_vars if they have referenced variables") Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a long-standing metadata corruption issue that happens from
time to time, but it's very difficult to reproduce and analyse, benefit
from the JBD2_CYCLE_RECORD option, we found out that the problem is the
checkpointing process miss to write out some buffers which are raced by
another do_get_write_access(). Looks below for detail.
jbd2_log_do_checkpoint() //transaction X
//buffer A is dirty and not belones to any transaction
__buffer_relink_io() //move it to the IO list
__flush_batch()
write_dirty_buffer()
do_get_write_access()
clear_buffer_dirty
__jbd2_journal_file_buffer()
//add buffer A to a new transaction Y
lock_buffer(bh)
//doesn't write out
__jbd2_journal_remove_checkpoint()
//finish checkpoint except buffer A
//filesystem corrupt if the new transaction Y isn't fully write out.
Due to the t_checkpoint_list walking loop in jbd2_log_do_checkpoint()
have already handles waiting for buffers under IO and re-added new
transaction to complete commit, and it also removing cleaned buffers,
this makes sure the list will eventually get empty. So it's fine to
leave buffers on the t_checkpoint_list while flushing out and completely
stop using the t_checkpoint_io_list.
Cc: stable@vger.kernel.org Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Tested-by: Zhihao Cheng <chengzhihao1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230606135928.434610-2-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdio_bus_init() and phy_driver_register() both have error paths, and if
those are ever hit, ethtool will have a stale pointer to the
phy_ethtool_phy_ops stub structure, which references memory from a
module that failed to load (phylib).
It is probably hard to force an error in this code path even manually,
but the error teardown path of phy_init() should be the same as
phy_exit(), which is now simply not the case.
Fixes: 1536e2857bd3 ("tcp: Add a TCP_FASTOPEN socket option to get a max backlog on its listner") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230719212857.3943972-12-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
end key should be equal to start unless NFT_SET_EXT_KEY_END is present.
Its possible to add elements that only have a start key
("{ 1.0.0.0 . 2.0.0.0 }") without an internval end.
Insertion treats this via:
if (nft_set_ext_exists(ext, NFT_SET_EXT_KEY_END))
end = (const u8 *)nft_set_ext_key_end(ext)->data;
else
end = start;
but removal side always uses nft_set_ext_key_end().
This is wrong and leads to garbage remaining in the set after removal
next lookup/insert attempt will give:
BUG: KASAN: slab-use-after-free in pipapo_get+0x8eb/0xb90
Read of size 1 at addr ffff888100d50586 by task nft-pipapo_uaf_/1399
Call Trace:
kasan_report+0x105/0x140
pipapo_get+0x8eb/0xb90
nft_pipapo_insert+0x1dc/0x1710
nf_tables_newsetelem+0x31f5/0x4e00
..
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Reported-by: lonial con <kongln9170@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
On some platforms there is a padding hole in the nft_verdict
structure, between the verdict code and the chain pointer.
On element insertion, if the new element clashes with an existing one and
NLM_F_EXCL flag isn't set, we want to ignore the -EEXIST error as long as
the data associated with duplicated element is the same as the existing
one. The data equality check uses memcmp.
For normal data (NFT_DATA_VALUE) this works fine, but for NFT_DATA_VERDICT
padding area leads to spurious failure even if the verdict data is the
same.
This then makes the insertion fail with 'already exists' error, even
though the new "key : data" matches an existing entry and userspace
told the kernel that it doesn't want to receive an error indication.
Fixes: c016c7e45ddf ("netfilter: nf_tables: honor NLM_F_EXCL flag in set element insertion") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
This func misses checking for platform_get_irq()'s call and may passes the
negative error codes to request_irq(), which takes unsigned IRQ #,
causing it to fail with -EINVAL, overriding an original error code.
Fix this by stop calling request_irq() with invalid IRQ #s.
Commit 3f4ca5fafc08 ("tcp: avoid the lookup process failing to get sk in
ehash table") reversed the order in how a socket is inserted into ehash
to fix an issue that ehash-lookup could fail when reqsk/full sk/twsk are
swapped. However, it introduced another lookup failure.
The full socket in ehash is allocated from a slab with SLAB_TYPESAFE_BY_RCU
and does not have SOCK_RCU_FREE, so the socket could be reused even while
it is being referenced on another CPU doing RCU lookup.
Let's say a socket is reused and inserted into the same hash bucket during
lookup. After the blamed commit, a new socket is inserted at the end of
the list. If that happens, we will skip sockets placed after the previous
position of the reused socket, resulting in ehash lookup failure.
As described in Documentation/RCU/rculist_nulls.rst, we should insert a
new socket at the head of the list to avoid such an issue.
This issue, the swap-lookup-failure, and another variant reported in [0]
can all be handled properly by adding a locked ehash lookup suggested by
Eric Dumazet [1].
However, this issue could occur for every packet, thus more likely than
the other two races, so let's revert the change for now.
key might contain private part of the key, so better use
kfree_sensitive to free it.
Fixes: 38320c70d282 ("[IPSEC]: Use crypto_aead and authenc in ESP") Signed-off-by: Wang Ming <machel@vivo.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In normal operation, each populated queue item has
next_to_watch pointing to the last TX desc of the packet,
while each cleaned item has it set to 0. In particular,
next_to_use that points to the next (necessarily clean)
item to use has next_to_watch set to 0.
When the TX queue is used both by an application using
AF_XDP with ZEROCOPY as well as a second non-XDP application
generating high traffic, the queue pointers can get in
an invalid state where next_to_use points to an item
where next_to_watch is NOT set to 0.
However, the implementation assumes at several places
that this is never the case, so if it does hold,
bad things happen. In particular, within the loop inside
of igc_clean_tx_irq(), next_to_clean can overtake next_to_use.
Finally, this prevents any further transmission via
this queue and it never gets unblocked or signaled.
Secondly, if the queue is in this garbled state,
the inner loop of igc_clean_tx_ring() will never terminate,
completely hogging a CPU core.
The reason is that igc_xdp_xmit_zc() reads next_to_use
before acquiring the lock, and writing it back
(potentially unmodified) later. If it got modified
before locking, the outdated next_to_use is written
pointing to an item that was already used elsewhere
(and thus next_to_watch got written).
Fixes: 9acf59a752d4 ("igc: Enable TX via AF_XDP zero-copy") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230717175444.3217831-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The assignment to idx in check_max_stack_depth happens once we see a
bpf_pseudo_call or bpf_pseudo_func. This is not an issue as the rest of
the code performs a few checks and then pushes the frame to the frame
stack, except the case of async callbacks. If the async callback case
causes the loop iteration to be skipped, the idx assignment will be
incorrect on the next iteration of the loop. The value stored in the
frame stack (as the subprogno of the current subprog) will be incorrect.
This leads to incorrect checks and incorrect tail_call_reachable
marking. Save the target subprog in a new variable and only assign to
idx once we are done with the is_async_cb check which may skip pushing
of frame to the frame stack and subsequent stack depth checks and tail
call markings.
Current driver enables backpressure for LBK interfaces.
But these interfaces do not support this feature.
Hence, this patch fixes the issue by skipping the
backpressure configuration for these interfaces.
Fixes: 75f36270990c ("octeontx2-pf: Support to enable/disable pause frames via ethtool"). Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Link: https://lore.kernel.org/r/20230716093741.28063-1-gakula@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
security/keys/trusted-keys/trusted_tpm2.c:203: warning: expecting prototype for tpm_buf_append_auth(). Prototype was for tpm2_buf_append_auth() instead.
If we set channels greater during iavf_remove(), and waiting reset done
would be timeout, then returned with error but changed num_active_queues
directly, that will lead to OOB like the following logs. Because the
num_active_queues is greater than tx/rx_rings[] allocated actually.
We do netif_napi_add() for all allocated q_vectors[], but potentially
do netif_napi_del() for part of them, then kfree q_vectors and leave
invalid pointers at dev->napi_list.
Although the patch #2 (of 2) can avoid the issue triggered by this
repro.sh, there still are other potential risks that if num_active_queues
is changed to less than allocated q_vectors[] by unexpected, the
mismatched netif_napi_add/del() can also cause UAF.
Since we actually call netif_napi_add() for all allocated q_vectors
unconditionally in iavf_alloc_q_vectors(), so we should fix it by
letting netif_napi_del() match to netif_napi_add().
Fixes: 5eae00c57f5e ("i40evf: main driver core") Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Cc: Donglin Peng <pengdonglin@sangfor.com.cn> Cc: Huang Cun <huangcun@sangfor.com.cn> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If cls_bpf_offload errors out, we must also undo tcf_bind_filter that
was done before the error.
Fix that by calling tcf_unbind_filter in errout_parms.
Fixes: eadb41489fd2 ("net: cls_bpf: add support for marking filters as hardware-only") Signed-off-by: Victor Nogueira <victor@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Move the call to of_get_ethdev_address to mtk_add_mac which is part of
the probe function and can hence itself return -EPROBE_DEFER should
of_get_ethdev_address return -EPROBE_DEFER. This allows us to entirely
get rid of the mtk_init function.
The problem of of_get_ethdev_address returning -EPROBE_DEFER surfaced
in situations in which the NVMEM provider holding the MAC address has
not yet be loaded at the time mtk_eth_soc is initially probed. In this
case probing of mtk_eth_soc should be deferred instead of falling back
to use a random MAC address, so once the NVMEM provider becomes
available probing can be repeated.
Fixes: 656e705243fd ("net-next: mediatek: add support for MT7623 ethernet") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
There are roughly 40 places where netdev->dev_addr is passed
as the destination to a of_get_mac_address() call. Add a helper
which takes a dev pointer instead, so it can call an appropriate
helper.
Note that of_get_mac_address() already assumes the address is
6 bytes long (ETH_ALEN) so use eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 1d6d537dc55d ("net: ethernet: mtk_eth_soc: handle probe deferral") Signed-off-by: Sasha Levin <sashal@kernel.org>
When we create an L2 loop on a bridge in netns, we will see packets storm
even if STP is enabled.
# unshare -n
# ip link add br0 type bridge
# ip link add veth0 type veth peer name veth1
# ip link set veth0 master br0 up
# ip link set veth1 master br0 up
# ip link set br0 type bridge stp_state 1
# ip link set br0 up
# sleep 30
# ip -s link show br0
2: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether b6:61:98:1c:1c:b5 brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast 95655376812861249 0 0 0 12861249 <-. Keep
TX: bytes packets errors dropped carrier collsns | increasing 1027834 11951 0 0 0 0 <-' rapidly
This is because llc_rcv() drops all packets in non-root netns and BPDU
is dropped.
Let's add extack warning when enabling STP in netns.
# unshare -n
# ip link add br0 type bridge
# ip link set br0 type bridge stp_state 1
Warning: bridge: STP does not work in non-root netns.
Note this commit will be reverted later when we namespacify the whole LLC
infra.
Fixes: e730c15519d0 ("[NET]: Make packet reception network namespace safe") Suggested-by: Harry Coin <hcoin@quietfountain.com> Link: https://lore.kernel.org/netdev/0f531295-e289-022d-5add-5ceffa0df9bc@quietfountain.com/ Suggested-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
CPSW ALE has 75 bit ALE entries which are stored within three 32 bit words.
The cpsw_ale_get_field() and cpsw_ale_set_field() functions assume that the
field will be strictly contained within one word. However, this is not
guaranteed to be the case and it is possible for ALE field entries to span
across up to two words at the most.
Fix the methods to handle getting/setting fields spanning up to two words.
Fixes: db82173f23c5 ("netdev: driver: ethernet: add cpsw address lookup engine support") Signed-off-by: Tanmay Patil <t-patil@ti.com>
[s-vadapalli@ti.com: rephrased commit message and added Fixes tag] Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
On ASUS TUF A16 it is reported that the ITE5570 ACPI device connected to
GPIO 7 is causing an interrupt storm. This issue doesn't happen on
Windows.
Comparing the GPIO register configuration between Windows and Linux
bit 20 has been configured as a pull up on Windows, but not on Linux.
Checking GPIO declaration from the firmware it is clear it *should* have
been a pull up on Linux as well.
On Linux amd_gpio_set_config() is currently only used for programming
the debounce. Actually the GPIO core calls it with all the arguments
that are supported by a GPIO, pinctrl-amd just responds `-ENOTSUPP`.
To solve this issue expand amd_gpio_set_config() to support the other
arguments amd_pinconf_set() supports, namely `PIN_CONFIG_BIAS_PULL_DOWN`,
`PIN_CONFIG_BIAS_PULL_UP`, and `PIN_CONFIG_DRIVE_STRENGTH`.
Reported-by: Nik P <npliashechnikov@gmail.com> Reported-by: Nathan Schulte <nmschulte@gmail.com> Reported-by: Friedrich Vock <friedrich.vock@gmx.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217336 Reported-by: dridri85@gmail.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217493 Link: https://lore.kernel.org/linux-input/20230530154058.17594-1-friedrich.vock@gmx.de/ Tested-by: Jan Visser <starquake@linuxeverywhere.org> Fixes: 2956b5d94a76 ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230705133005.577-3-mario.limonciello@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-L only specifies the search path for libraries directly provided in the
link line with -l. Because -lopencsd isn't specified, it's only linked
because it's a dependency of -lopencsd_c_api. Dependencies like this are
resolved using the default system search paths or -rpath-link=... rather
than -L. This means that compilation only works if OpenCSD is installed
to the system rather than provided with the CSLIBS (-L) option.
This could be fixed by adding -Wl,-rpath-link=$(CSLIBS) but that is less
conventional than just adding -lopencsd to the link line so that it uses
-L. -lopencsd seems to have been removed in commit ed17b1914978eddb
("perf tools: Drop requirement for libstdc++.so for libopencsd check")
because it was thought that there was a chance compilation would work
even if it didn't exist, but I think that only applies to libstdc++ so
there is no harm to add it back. libopencsd.so and libopencsd_c_api.so
would always exist together.
Testing
=======
The following scenarios now all work:
* Cross build with OpenCSD installed
* Cross build using CSLIBS=...
* Native build with OpenCSD installed
* Native build using CSLIBS=...
* Static cross build with OpenCSD installed
* Static cross build with CSLIBS=...
Committer testing:
⬢[acme@toolbox perf-tools]$ alias m
alias m='make -k BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools -C tools/perf install-bin && git status && perf test python ; perf record -o /dev/null sleep 0.01 ; perf stat --null sleep 0.01'
⬢[acme@toolbox perf-tools]$ ldd ~/bin/perf | grep csd
libopencsd_c_api.so.1 => /lib64/libopencsd_c_api.so.1 (0x00007fd49c44e000)
libopencsd.so.1 => /lib64/libopencsd.so.1 (0x00007fd49bd56000)
⬢[acme@toolbox perf-tools]$ cat /etc/redhat-release
Fedora release 36 (Thirty Six)
⬢[acme@toolbox perf-tools]$
Fixes: ed17b1914978eddb ("perf tools: Drop requirement for libstdc++.so for libopencsd check") Reported-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Signed-off-by: James Clark <james.clark@arm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Cc: coresight@lists.linaro.org Closes: https://lore.kernel.org/linux-arm-kernel/56905d7a-a91e-883a-b707-9d5f686ba5f1@arm.com/ Link: https://lore.kernel.org/all/36cc4dc6-bf4b-1093-1c0a-876e368af183@kleine-koenig.org/ Link: https://lore.kernel.org/r/20230707154546.456720-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the prepend byte count field starts at bit 8, and the next defined
bit is SPI_CMD_ONE_BYTE at bit 11, it can be at most 3 bits wide, and
thus the max value is 7, not 15.
Fixes: b17de076062a ("spi/bcm63xx: work around inability to keep CS up") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Link: https://lore.kernel.org/r/20230629071453.62024-1-jonas.gorski@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Syzkaller reported an issue where txBegin may be called
on a superblock in a read-only mounted filesystem which leads
to NULL pointer deref. This could be solved by checking if
the filesystem is read-only before calling txBegin, and returning
with appropiate error code.
Zero-length arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace zero-length array with flexible-array
member in struct memmap.
Address the following warning found after building (with GCC-13) mips64
with decstation_64_defconfig:
In function 'rex_setup_memory_region',
inlined from 'prom_meminit' at arch/mips/dec/prom/memory.c:91:3:
arch/mips/dec/prom/memory.c:72:31: error: array subscript i is outside array bounds of 'unsigned char[0]' [-Werror=array-bounds=]
72 | if (bm->bitmap[i] == 0xff)
| ~~~~~~~~~~^~~
In file included from arch/mips/dec/prom/memory.c:16:
./arch/mips/include/asm/dec/prom.h: In function 'prom_meminit':
./arch/mips/include/asm/dec/prom.h:73:23: note: while referencing 'bitmap'
73 | unsigned char bitmap[0];
This helps with the ongoing efforts to globally enable -Warray-bounds.
The bug occurs when the dbAllocDmapLev()function attempts to access
dp->tree.stree[leafidx + LEAFIND] while the leafidx value is negative.
To rectify this, the patch introduces a safeguard within the
dbAllocDmapLev() function. A check has been added to verify if leafidx is
negative. If it is, the function immediately returns an I/O error, preventing
any further execution that could potentially cause harm.
For filenames that begin with . and are between 2 and 5 characters long,
UDF charset conversion code would read uninitialized memory in the
output buffer. The only practical impact is that the name may be prepended a
"unification hash" when it is not actually needed but still it is good
to fix this.
Above issue may happens as follows:
ProcessA ProcessB ProcessC
sys_fsconfig
vfs_fsconfig_locked
reconfigure_super
ext4_remount
dquot_suspend -> suspend all type quota
__dquot_initialize
__dquot_initialize
dqget
if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags))
ext4_acquire_dquot
-> Return error DQ_ACTIVE_B flag isn't set
dquot_disable
invalidate_dquots
if (atomic_read(&dquot->dq_count))
dqgrab
WARN_ON_ONCE(!test_bit(DQ_ACTIVE_B, &dquot->dq_flags))
-> Trigger warning
In the above scenario, 'dquot->dq_flags' has no DQ_ACTIVE_B is normal when
dqgrab().
To solve above issue just replace the dqgrab() use in invalidate_dquots() with
atomic_inc(&dquot->dq_count).
Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230605140731.2427629-3-yebin10@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When add_dquot_ref() fails (usually due to IO error or ENOMEM), we want
to disable quotas we are trying to enable. However dquot_disable() call
was passed just the flags we are enabling so in case flags ==
DQUOT_USAGE_ENABLED dquot_disable() call will just fail with EINVAL
instead of properly disabling quotas. Fix the problem by always passing
DQUOT_LIMITS_ENABLED | DQUOT_USAGE_ENABLED to dquot_disable() in this
case.
Reported-and-tested-by: Ye Bin <yebin10@huawei.com> Reported-by: syzbot+e633c79ceaecbf479854@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230605140731.2427629-2-yebin10@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The type of size is unsigned, if size is 0x40000000, there will be an
integer overflow, size will be zero after size *= sizeof(uint32_t),
will cause uninitialized memory to be referenced later
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: hackyzh002 <hackyzh002@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When run on a file system where the inline_data feature has been
enabled, xfstests generic/269, generic/270, and generic/476 cause ext4
to emit error messages indicating that inline directory entries are
corrupted. This occurs because the inline offset used to locate
inline directory entries in the inode body is not updated when an
xattr in that shared region is deleted and the region is shifted in
memory to recover the space it occupied. If the deleted xattr precedes
the system.data attribute, which points to the inline directory entries,
that attribute will be moved further up in the region. The inline
offset continues to point to whatever is located in system.data's former
location, with unfortunate effects when used to access directory entries
or (presumably) inline data in the inode body.
Make sure that the soundwire device used for register accesses has been
enumerated and initialised before trying to read the codec variant
during component probe.
This specifically avoids interpreting (a masked and shifted) -EBUSY
errno as the variant:
wcd938x_codec audio-codec: ASoC: error at soc_component_read_no_lock on audio-codec for register: [0x000034b0] -16
in case the soundwire device has not yet been initialised, which in turn
prevents some headphone controls from being registered.
[Why & How]
Port of a change that went into DCN314 to keep the PHY enabled
when we have a connected and active DP display.
The PHY can hang if PHY refclk is disabled inadvertently.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Josip Pavic <josip.pavic@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[WHY]
All of pipes will be used when the MPC split enable on the dcn
which just has 2 pipes. Then MPO enter will trigger the minimal
transition which need programe dcn from 2 pipes MPC split to 2
pipes MPO. This action will cause lag if happen frequently.
[HOW]
Disable the MPC split for the platform which dcn resource is limited
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dmt_mode is allocated and never freed in this function.
It was found with the ast driver, but most drivers using generic fbdev
setup are probably affected.
When looking at the TC selftest reports, I noticed one test was failing
because /proc/net/nf_conntrack was not available.
not ok 373 3992 - Add ct action triggering DNAT tuple conflict
Could not match regex pattern. Verify command output:
cat: /proc/net/nf_conntrack: No such file or directory
It is only available if NF_CONNTRACK_PROCFS kconfig is set. So the issue
can be fixed simply by adding it to the list of required kconfig.
The SMBus I2C buses have limits on the size of transfers they can do but
do not factor in the register length meaning we may try to do a transfer
longer than our length limit, the core will not take care of this.
Future changes will factor this out into the core but there are a number
of users that assume current behaviour so let's just do something
conservative here.
This does not take account padding bits but practically speaking these
are very rarely if ever used on I2C buses given that they generally run
slowly enough to mean there's no issue.
When problems were noticed with the register address not being taken
into account when limiting raw transfers with I2C devices we fixed this
in the core. Unfortunately it has subsequently been realised that a lot
of buses were relying on the prior behaviour, partly due to unclear
documentation not making it obvious what was intended in the core. This
is all more involved to fix than is sensible for a fix commit so let's
just drop the original fixes, a separate commit will fix the originally
observed problem in an I2C specific way
Fixes: 3981514180c9 ("regmap: Account for register length when chunking") Fixes: c8e796895e23 ("regmap: spi-avmm: Fix regmap_bus max_raw_write") Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Xu Yilun <yilun.xu@intel.com> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20230712-regmap-max-transfer-v1-1-80e2aed22e83@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When looking for something else in LKFT reports [1], I noticed most of
the tests were skipped because the "teardown stage" did not complete
successfully.
Pedro found out this is due to the fact CONFIG_NF_FLOW_TABLE is required
but not listed in the 'config' file. Adding it to the list fixes the
issues on LKFT side. CONFIG_NET_ACT_CT is now set to 'm' in the final
kconfig.
When looking for something else in LKFT reports [1], I noticed that the
TC selftest ended with a timeout error:
not ok 1 selftests: tc-testing: tdc.sh # TIMEOUT 45 seconds
The timeout had been introduced 3 years ago, see the Fixes commit below.
This timeout is only in place when executing the selftests via the
kselftests runner scripts. I guess this is not what most TC devs are
using and nobody noticed the issue before.
The new timeout is set to 15 minutes as suggested by Pedro [2]. It looks
like it is plenty more time than what it takes in "normal" conditions.
Fuse shouldn't return ENOSYS from its ioctl implementation. If userspace
responds with ENOSYS it should be translated to ENOTTY.
There are two ways to return an error from the IOCTL request:
- fuse_out_header.error
- fuse_ioctl_out.result
Commit 02c0cab8e734 ("fuse: ioctl: translate ENOSYS") already fixed this
issue for the first case, but missed the second case. This patch fixes the
second case.
At exclude_super_stripes(), if we happen to find a block group that has
super blocks mapped to it and we are on a zoned filesystem, we error out
as this is not supposed to happen, indicating either a bug or maybe some
memory corruption for example. However we are exiting the function without
freeing the memory allocated for the logical address of the super blocks.
Fix this by freeing the logical address.
Fixes: 12659251ca5d ("btrfs: implement log-structured superblock for ZONED mode") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the LOOKUP request triggered from fuse_dentry_revalidate() is
interrupted, then the dentry will be invalidated, possibly resulting in
submounts being unmounted.
The warning happens because btrfs_qgroup_destroy_extent_records(), called
in the transaction abort path, we free all entries from the rbtree
"dirty_extent_root" with rbtree_postorder_for_each_entry_safe(), but we
don't actually empty the rbtree - it's still pointing to nodes that were
freed.
So set the rbtree's root node to NULL to avoid this warning (assign
RB_ROOT).
Fixes: 81f7eb00ff5b ("btrfs: destroy qgroup extent records on transaction abort") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When making a DNS query inside the kernel using dns_query(), the request
code can in rare cases end up creating a duplicate index key in the
assoc_array of the destination keyring. It is eventually found by
a BUG_ON() check in the assoc_array implementation and results in
a crash.
The situation occurs as follows:
* Some kernel facility invokes dns_query() to resolve a hostname, for
example, "abcdef". The function registers its global DNS resolver
cache as current->cred.thread_keyring and passes the query to
request_key_net() -> request_key_tag() -> request_key_and_link().
* Function request_key_and_link() creates a keyring_search_context
object. Its match_data.cmp method gets set via a call to
type->match_preparse() (resolves to dns_resolver_match_preparse()) to
dns_resolver_cmp().
* Function request_key_and_link() continues and invokes
search_process_keyrings_rcu() which returns that a given key was not
found. The control is then passed to request_key_and_link() ->
construct_alloc_key().
* Concurrently to that, a second task similarly makes a DNS query for
"abcdef." and its result gets inserted into the DNS resolver cache.
* Back on the first task, function construct_alloc_key() first runs
__key_link_begin() to determine an assoc_array_edit operation to
insert a new key. Index keys in the array are compared exactly as-is,
using keyring_compare_object(). The operation finds that "abcdef" is
not yet present in the destination keyring.
* Function construct_alloc_key() continues and checks if a given key is
already present on some keyring by again calling
search_process_keyrings_rcu(). This search is done using
dns_resolver_cmp() and "abcdef" gets matched with now present key
"abcdef.".
* The found key is linked on the destination keyring by calling
__key_link() and using the previously calculated assoc_array_edit
operation. This inserts the "abcdef." key in the array but creates
a duplicity because the same index key is already present.
Fix the problem by postponing __key_link_begin() in
construct_alloc_key() until an actual key which should be linked into
the destination keyring is determined.
[jarkko@kernel.org: added a fixes tag and cc to stable] Cc: stable@vger.kernel.org # v5.3+ Fixes: df593ee23e05 ("keys: Hoist locking out of __key_link_begin()") Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Reviewed-by: Joey Lee <jlee@suse.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The HP Laptop 15s-eq2xxx uses ALC236 codec and controls the mute LED using
COEF 0x07 index 1. No existing quirk covers this configuration.
Adds a new quirk and enables it for the device.
This was the ALC283 depop procedure.
Maybe this procedure wasn't suitable with new codec.
So, let us remove it. But HP 15z-fc000 must do 3k pull low. If it
reboot with plugged headset,
it will have errors show don't find codec error messages. Run 3k pull
low will solve issues.
So, let AMD chipset will run this for workarround.
Fixes: 5aec98913095 ("ALSA: hda/realtek - ALC236 headset MIC recording issue") Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Reported-by: Joseph C. Sible <josephcsible@gmail.com> Closes: https://lore.kernel.org/r/CABpewhE4REgn9RJZduuEU6Z_ijXNeQWnrxO1tg70Gkw=F8qNYg@mail.gmail.com/ Link: https://lore.kernel.org/r/4678992299664babac4403d9978e7ba7@realtek.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a fix for the Zen2 VZEROUPPER data corruption bug where under
certain circumstances executing VZEROUPPER can cause register
corruption or leak data.
The optimal fix is through microcode but in the case the proper
microcode revision has not been applied, enable a fallback fix using
a chicken bit.
The trouble is that the drm_dev_unplugged() checks are by design racy,
they do not synchronize against all outstanding ioctl. This is because
those ioctl could block forever (both for modeset and for driver
specific ioctls), leading to deadlocks in hotunplug. Instead the code
sections that touch the hardware need to be annotated with
drm_dev_enter/exit, to avoid accessing hardware resources after the
unload/remove has finished.
To avoid use-after-free issues all the involved userspace visible
objects are supposed to hold a reference on the underlying drm_device,
like drm_file does.
The issue now is that we missed one, the atomic modeset ioctl can be run
in a nonblocking fashion, and in that case it cannot rely on the implied
drm_device reference provided by the ioctl calling context. This can
result in a use-after-free if an nonblocking atomic commit is carefully
raced against a driver unload.
Fix this by unconditionally grabbing a drm_device reference for any
drm_atomic_state structures. Strictly speaking this isn't required for
blocking commits and TEST_ONLY calls, but it's the simpler approach.
Thanks to shanzhulig for the initial idea of grabbing an unconditional
reference, I just added comments, a condensed commit message and fixed a
minor potential issue in where exactly we drop the final reference.
Reported-by: shanzhulig <shanzhulig@gmail.com> Suggested-by: shanzhulig <shanzhulig@gmail.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@gmail.com> Cc: stable@kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
25369891fcef deletes a check for the case where no 'lmax' is
specified which 3037933448f6 previously fixed as 'lmax'
could be set to the device's MTU without any bound checking
for QFQ_LMAX_MIN and QFQ_LMAX_MAX. Therefore, reintroduce the check.
Fixes: 25369891fcef ("net/sched: sch_qfq: refactor parsing of netlink parameters") Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit e4de20576986 ("MIPS: KVM: Fix NULL pointer dereference") missed
converting one place accessing cop0 registers, which results in a build
error, if KVM_MIPS_DEBUG_COP0_COUNTERS is enabled.
Klocwork reported warning of NULL pointer may be dereferenced. The routine
exits when sa_ctl is NULL and fcport is allocated after the exit call thus
causing NULL fcport pointer to dereference at the time of exit.
To avoid fcport pointer dereference, exit the routine when sa_ctl is NULL.
System crash due to use after free.
Current code allows terminate_rport_io to exit before making
sure all IOs has returned. For FCP-2 device, IO's can hang
on in HW because driver has not tear down the session in FW at
first sign of cable pull. When dev_loss_tmo timer pops,
terminate_rport_io is called and upper layer is about to
free various resources. Terminate_rport_io trigger qla to do
the final cleanup, but the cleanup might not be fast enough where it
leave qla still holding on to the same resource.
Wait for IO's to return to upper layer before resources are freed.
Fix to update dynamic data counter ('dyndata') and max length ('maxlen')
only if the fetcharg uses the dynamic data. Also get out arg->dynamic
from unlikely(). This makes dynamic data address wrong if
process_fetch_insn() returns error on !arg->dynamic case.
Fix not to count the error code (which is minus value) to the total
used length of array, because it can mess up the return code of
process_fetch_insn_bottom(). Also clear the 'ret' value because it
will be used for calculating next data_loc entry.
MPTCP selftests are using TCP SYN Cookies for quite a while now, since
v5.9.
Some CIs don't have this config option enabled and this is causing
issues in the tests:
# ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 167ms) sysctl: cannot stat /proc/sys/net/ipv4/tcp_syncookies: No such file or directory
# [ OK ]./mptcp_connect.sh: line 554: [: -eq: unary operator expected
There is no impact in the results but the test is not doing what it is
supposed to do.
Fixes: fed61c4b584c ("selftests: mptcp: make 2nd net namespace use tcp syn cookies unconditionally") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When an error was detected when checking the marks, a message was
correctly printed mentioning the error but followed by another one
saying everything was OK and the selftest was not marked as failed as
expected.
Now the 'ret' variable is directly set to 1 in order to make sure the
exit is done with an error, similar to what is done in other functions.
While at it, the error is correctly propagated to the caller.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: dc65fe82fb07 ("selftests: mptcp: add packet mark test case") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / linux-stable / log