For DRM legacy gamma, AMD display manager applies implicit sRGB degamma
using a pre-defined sRGB transfer function. It works fine for DCN2
family where degamma ROM and custom curves go to the same color block.
But, on DCN3+, degamma is split into two blocks: degamma ROM for
pre-defined TFs and `gamma correction` for user/custom curves and
degamma ROM settings doesn't apply to cursor plane. To get DRM legacy
gamma working as expected, enable cursor degamma ROM for implict sRGB
degamma on HW with this configuration.
Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2803 Fixes: 96b020e2163f ("drm/amd/display: check attr flag before set cursor degamma on DCN3+") Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rsvp classifier has served us well for about a quarter of a century but has
has not been getting much maintenance attention due to lack of known users.
The offset is just 32bits here so this can potentially overflow if
somebody specifies a large value. Instead reduce the size to calculate
the last possible offset.
The error handling path incorrectly drops the reference to the user
fence BO resulting in potential reference count underflow.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dropping bit 31:4 of page table base is wrong, it makes page table
base points to wrong address if phys addr is beyond 64GB; dropping
page_table_start/end bit 31:4 is unnecessary since dcn20_vmid_setup
will do that. Also, while we are at it, cleanup the assignments using
upper_32_bits()/lower_32_bits() and AMDGPU_GPU_PAGE_SHIFT.
Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354 Fixes: 81d0bcf99009 ("drm/amdgpu: make display pinning more flexible (v2)") Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Co-developed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the configuration PAGE_SIZE 64k and filesystem blocksize 64k,
a problem occurred when more than 13 million files were directly created
under a directory:
EXT4-fs error (device xx): ext4_dx_csum_set:492: inode #xxxx: comm xxxxx: dir seems corrupt? Run e2fsck -D.
EXT4-fs error (device xx): ext4_dx_csum_verify:463: inode #xxxx: comm xxxxx: dir seems corrupt? Run e2fsck -D.
EXT4-fs error (device xx): dx_probe:856: inode #xxxx: block 8188: comm xxxxx: Directory index failed checksum
When enough files are created, the fake_dirent->reclen will be 0xffff.
it doesn't equal to the blocksize 65536, i.e. 0x10000.
But it is not the same condition when blocksize equals to 4k.
when enough files are created, the fake_dirent->reclen will be 0x1000.
it equals to the blocksize 4k, i.e. 0x1000.
The problem seems to be related to the limitation of the 16-bit field
when the blocksize is set to 64k.
To address this, helpers like ext4_rec_len_{from,to}_disk has already
been introduced to complete the conversion between the encoded and the
plain form of rec_len.
So fix this one by using the helper, and all the other in this file too.
Cc: stable@kernel.org Fixes: dbe89444042a ("ext4: Calculate and verify checksums for htree nodes") Suggested-by: Andreas Dilger <adilger@dilger.ca> Suggested-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Shida Zhang <zhangshida@kylinos.cn> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20230803060938.1929759-1-zhangshida@kylinos.cn Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function pm8001_pci_resume() only calls pm8001_request_irq() without
calling pm8001_setup_irq(). This causes the IRQ allocation to fail, which
leads all drives being removed from the system.
Fix this issue by integrating the code for pm8001_setup_irq() directly
inside pm8001_request_irq() so that MSI-X setup is performed both during
normal initialization and resume operations.
Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20230911232745.325149-2-dlemoal@kernel.org Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following processes run into a deadlock. CPU 41 was waiting for CPU 29
to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29
was hung by that spinlock with IRQs disabled.
The lock is used to synchronize different sysfs operations, it doesn't
protect any resource that will be touched by an interrupt. Consequently
it's not required to disable IRQs. Replace the spinlock with a mutex to fix
the deadlock.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In AHCI 1.3.1, the register description for CAP.SSC:
"When cleared to ‘0’, software must not allow the HBA to initiate
transitions to the Slumber state via agressive link power management nor
the PxCMD.ICC field in each port, and the PxSCTL.IPM field in each port
must be programmed to disallow device initiated Slumber requests."
In AHCI 1.3.1, the register description for CAP.PSC:
"When cleared to ‘0’, software must not allow the HBA to initiate
transitions to the Partial state via agressive link power management nor
the PxCMD.ICC field in each port, and the PxSCTL.IPM field in each port
must be programmed to disallow device initiated Partial requests."
Ensure that we always set the corresponding bits in PxSCTL.IPM, such that
a device is not allowed to initiate transitions to power states which are
unsupported by the HBA.
DevSleep is always initiated by the HBA, however, for completeness, set the
corresponding bit in PxSCTL.IPM such that agressive link power management
cannot transition to DevSleep if DevSleep is not supported.
sata_link_scr_lpm() is used by libahci, ata_piix and libata-pmp.
However, only libahci has the ability to read the CAP/CAP2 register to see
if these features are supported. Therefore, in order to not introduce any
regressions on ata_piix or libata-pmp, create flags that indicate that the
respective feature is NOT supported. This way, the behavior for ata_piix
and libata-pmp should remain unchanged.
This change is based on a patch originally submitted by Runa Guo-oc.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Fixes: 1152b2617a6e ("libata: implement sata_link_scr_lpm() and make ata_dev_set_feature() global") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reset the i2c controller when an i2c transfer timeout occurs.
The remaining interrupts and device should be reset to avoid
unpredictable controller behavior.
Fixes: 2e57b7cebb98 ("i2c: aspeed: Add multi-master use case support") Cc: <stable@vger.kernel.org> # v5.1+ Signed-off-by: Tommy Huang <tommy_huang@aspeedtech.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function tracefs_create_dir() was missing a lockdown check and was
called by the RV code. This gave an inconsistent behavior of this function
returning success while other tracefs functions failed. This caused the
inode being freed by the wrong kmem_cache.
Link: https://lkml.kernel.org/r/20230905182711.692687042@goodmis.org Link: https://lore.kernel.org/all/202309050916.58201dc6-oliver.sang@intel.com/ Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ajay Kaher <akaher@vmware.com> Cc: Ching-lin Yu <chinglinyu@google.com> Fixes: bf8e602186ec4 ("tracing: Do not create tracefs files if tracefs lockdown is in effect") Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The option files update the options for a given trace array. For an
instance, if the file is opened and the instance is deleted, reading or
writing to the file will cause a use after free.
Up the ref count of the trace_array when an option file is opened.
The current_trace updates the trace array tracer. For an instance, if the
file is opened and the instance is deleted, reading or writing to the file
will cause a use after free.
Up the ref count of the trace array when current_trace is opened.
The tracing_max_latency file points to the trace_array max_latency field.
For an instance, if the file is opened and the instance is deleted,
reading or writing to the file will cause a use after free.
Up the ref count of the trace_array when tracing_max_latency is opened.
During the ino lookup ioctl we can end up calling btrfs_iget() to get an
inode reference while we are holding on a root's btree. If btrfs_iget()
needs to lookup the inode from the root's btree, because it's not
currently loaded in memory, then it will need to lock another or the
same path in the same root btree. This may result in a deadlock and
trigger the following lockdep splat:
WARNING: possible circular locking dependency detected 6.5.0-rc7-syzkaller-00004-gf7757129e3de #0 Not tainted
------------------------------------------------------
syz-executor277/5012 is trying to acquire lock: ffff88802df41710 (btrfs-tree-01){++++}-{3:3}, at: __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
but task is already holding lock: ffff88802df418e8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
When running delayed items we are holding a delayed node's mutex and then
we will attempt to modify a subvolume btree to insert/update/delete the
delayed items. However if have an error during the insertions for example,
btrfs_insert_delayed_items() may return with a path that has locked extent
buffers (a leaf at the very least), and then we attempt to release the
delayed node at __btrfs_run_delayed_items(), which requires taking the
delayed node's mutex, causing an ABBA type of deadlock. This was reported
by syzbot and the lockdep splat is the following:
WARNING: possible circular locking dependency detected 6.5.0-rc7-syzkaller-00024-g93f5de5f648d #0 Not tainted
------------------------------------------------------
syz-executor.2/13257 is trying to acquire lock: ffff88801835c0c0 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node+0x9a/0xaa0 fs/btrfs/delayed-inode.c:256
but task is already holding lock: ffff88802a5ab8e8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_lock+0x3c/0x2a0 fs/btrfs/locking.c:198
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
ovl_{read,write}_iter() always call fdput(real) to put one or zero
refcounts of the real file, but for aio, whether it was submitted or not,
ovl_aio_put() also calls fdput(), which is not balanced. This is only a
problem in the less common case when FDPUT_FPUT flag is set.
To fix the problem use get_file() to take file refcount and use fput()
instead of fdput() in ovl_aio_put().
Some local filesystems support setting persistent fileattr flags
(e.g. FS_NOATIME_FL) on directories and regular files via ioctl.
Some of those persistent fileattr flags are reflected to vfs as
in-memory inode flags (e.g. S_NOATIME).
Overlayfs uses the in-memory inode flags (e.g. S_NOATIME) on a lower file
as an indication that a the lower file may have persistent inode fileattr
flags (e.g. FS_NOATIME_FL) that need to be copied to upper file.
However, in some cases, the S_NOATIME in-memory flag could be a false
indication for persistent FS_NOATIME_FL fileattr. For example, with NFS
and FUSE lower fs, as was the case in the two bug reports, the S_NOATIME
flag is set unconditionally for all inodes.
Users cannot set persistent fileattr flags on symlinks and special files,
but in some local fs, such as ext4/btrfs/tmpfs, the FS_NOATIME_FL fileattr
flag are inheritted to symlinks and special files from parent directory.
In both cases described above, when lower symlink has the S_NOATIME flag,
overlayfs will try to copy the symlink's fileattrs and fail with error
ENOXIO, because it could not open the symlink for the ioctl security hook.
To solve this failure, do not attempt to copyup fileattrs for anything
other than directories and regular files.
Changing the mode of symlinks is meaningless as the vfs doesn't take the
mode of a symlink into account during path lookup permission checking.
However, the vfs doesn't block mode changes on symlinks. This however,
has lead to an untenable mess roughly classifiable into the following
two categories:
(1) Filesystems that don't implement a i_op->setattr() for symlinks.
Such filesystems may or may not know that without i_op->setattr()
defined, notify_change() falls back to simple_setattr() causing the
inode's mode in the inode cache to be changed.
That's a generic issue as this will affect all non-size changing
inode attributes including ownership changes.
Example: afs
(2) Filesystems that fail with EOPNOTSUPP but change the mode of the
symlink nonetheless.
Some filesystems will happily update the mode of a symlink but still
return EOPNOTSUPP. This is the biggest source of confusion for
userspace.
The EOPNOTSUPP in this case comes from POSIX ACLs. Specifically it
comes from filesystems that call posix_acl_chmod(), e.g., btrfs via
But for most major filesystems with POSIX ACL support such as btrfs,
ext4, ceph, tmpfs, xfs and others this will fail with EOPNOTSUPP with
the mode still updated due to the aforementioned posix_acl_chmod()
nonsense.
So, given that for all major filesystems this would fail with EOPNOTSUPP
and that both glibc (cf. [1]) and musl (cf. [2]) outright block mode
changes on symlinks we should just try and block mode changes on
symlinks directly in the vfs and have a clean break with this nonsense.
If this causes any regressions, we do the next best thing and fix up all
filesystems that do return EOPNOTSUPP with the mode updated to not call
posix_acl_chmod() on symlinks.
But as usual, let's try the clean cut solution first. It's a simple
patch that can be easily reverted. Not marking this for backport as I'll
do that manually if we're reasonably sure that this works and there are
no strong objections.
We could block this in chmod_common() but it's more appropriate to do it
notify_change() as it will also mean that we catch filesystems that
change symlink permissions explicitly or accidently.
Similar proposals were floated in the past as in [3] and [4] and again
recently in [5]. There's also a couple of bugs about this inconsistency
as in [6] and [7].
__symbol_put() is really meant as an internal helper and is not available
when module unloading is disabled, unlike the previously used symbol_put():
samples/hw_breakpoint/data_breakpoint.c: In function 'hw_break_module_exit':
samples/hw_breakpoint/data_breakpoint.c:73:9: error: implicit declaration of function '__symbol_put'; did you mean '__symbol_get'? [-Werror=implicit-function-declaration]
The hw_break_module_exit() function is not actually used when module
unloading is disabled, but it still causes the build failure for an
undefined identifier. Enclose this one call in an appropriate #ifdef to
clarify what the requirement is. Leaving out the entire exit function
would also work but feels less clar in this case.
Fixes: 910e230d5f1bb ("samples/hw_breakpoint: Fix kernel BUG 'invalid opcode: 0000'") Fixes: d8a84d33a4954 ("samples/hw_breakpoint: drop use of kallsyms_lookup_name()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This causes WARNING from kexec_purgatory_setup_sechdrs():
WARNING: CPU: 26 PID: 110894 at kernel/kexec_file.c:919
kexec_load_purgatory+0x37f/0x390
Fix this by disabling LTO for purgatory.
[ AFAICT, x86 is the only arch that supports LTO and purgatory. ]
We could also fix this with an explicit linker script to rejoin .text.*
sections back into .text. However, given the benefit of LTOing purgatory
is small, simply disable the production of more .text.* sections for now.
Fixes: b33fff07e3e3 ("x86, build: allow LTO to be selected") Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Link: https://lore.kernel.org/r/20230914170138.995606-1-song@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
The decompressor has a hard limit on the number of page tables it can
allocate. This limit is defined at compile-time and will cause boot
failure if it is reached.
The kernel is very strict and calculates the limit precisely for the
worst-case scenario based on the current configuration. However, it is
easy to forget to adjust the limit when a new use-case arises. The
worst-case scenario is rarely encountered during sanity checks.
In the case of enabling 5-level paging, a use-case was overlooked. The
limit needs to be increased by one to accommodate the additional level.
This oversight went unnoticed until Aaron attempted to run the kernel
via kexec with 5-level paging and unaccepted memory enabled.
Update wost-case calculations to include 5-level paging.
To address this issue, let's allocate some extra space for page tables.
128K should be sufficient for any use-case. The logic can be simplified
by using a single value for all kernel configurations.
[ Also add a warning, should this memory run low - by Dave Hansen. ]
Fixes: 34bbb0009f3b ("x86/boot/compressed: Enable 5-level paging during decompression stage") Reported-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20230915070221.10266-1-kirill.shutemov@linux.intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix to unmount the tracefs if the ftracetest mounted it for recovering
system environment. If the tracefs is already mounted, this does nothing.
Suggested-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/all/29fce076-746c-4650-8358-b4e0fa215cf7@sirena.org.uk/ Fixes: cbd965bde74c ("ftrace/selftests: Return the skip code when tracing directory not configured in kernel") Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The timeout arg of usb_bulk_msg() is ms already, which has been converted
to jiffies by msecs_to_jiffies() in usb_start_wait_urb(). So fix the usage
by removing the redundant msecs_to_jiffies() in the macros.
And as Hans suggested, also remove msecs_to_jiffies() for the IDLE_TIMEOUT
macro to make it consistent here and so change IDLE_TIMEOUT to
msecs_to_jiffies(IDLE_TIMEOUT) where it is used.
Fixes: e4f86e437164 ("drm: Add Grain Media GM12U320 driver v2") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Suggested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230904021421.1663892-1-ruanjinjie@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The function btrfs_validate_super() should verify the metadata_uuid in
the provided superblock argument. Because, all its callers expect it to
do that.
In some cases, we need to read the FSID from the superblock when the
metadata_uuid is not set, and otherwise, read the metadata_uuid. So,
add a helper.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 6bfe3959b0e7 ("btrfs: compare the correct fsid/metadata_uuid in btrfs_validate_super") Signed-off-by: Sasha Levin <sashal@kernel.org>
As of now, bpf counters (bperf) don't support event groups. But the
default perf stat includes topdown metrics if supported (on recent Intel
machines) which require groups. That makes perf stat exiting.
$ sudo perf stat --bpf-counter true
bpf managed perf events do not yet support groups.
Actually the test explicitly uses cycles event only, but it missed to
pass the option when it checks the availability of the command.
Fixes: 2c0cb9f56020d2ea ("perf test: Add a shell test for 'perf stat --bpf-counters' new option") Reviewed-by: Song Liu <song@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: bpf@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230825164152.165610-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently the test skips with an error because == only works in bash:
$ ./perf test 91 -v
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
91: perf stat --bpf-counters test :
--- start ---
test child forked, pid 44586
./tests/shell/stat_bpf_counters.sh: 26: [: -v: unexpected operator
test child finished with -2
---- end ----
perf stat --bpf-counters test: Skip
Changing == to = does the same thing, but doesn't result in an error:
./perf test 91 -v
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
91: perf stat --bpf-counters test :
--- start ---
test child forked, pid 45833
Skipping: --bpf-counters not supported
Error: unknown option `bpf-counters'
[...]
test child finished with -2
---- end ----
perf stat --bpf-counters test: Skip
Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20211028134828.65774-2-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 68ca249c964f ("perf test shell stat_bpf_counters: Fix test on Intel") Signed-off-by: Sasha Levin <sashal@kernel.org>
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this up by moving the related file to use "grep -E" instead.
Here are the steps to install the latest grep:
wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
tar xf grep-3.8.tar.gz
cd grep-3.8 && ./configure && make
sudo make install
export PATH=/usr/local/bin:$PATH
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Stable-dep-of: 4fe4a6374c4d ("MIPS: Only fiddle with CHECKFLAGS if `need-compiler'") Signed-off-by: Sasha Levin <sashal@kernel.org>
v7.2 controller has different ECC level field size and shift in the acc
control register than its predecessor and successor controller. It needs
to be set specifically.
Allow a brcmnand_soc instance to provide a custom set of I/O operations
which we will require when using this driver on a BCMA bus which is not
directly memory mapped I/O. Update the nand_{read,write}_reg accordingly
to use the SoC operations if provided.
To minimize the penalty on other SoCs which do support standard MMIO
accesses, we use a static key which is disabled by default and gets
enabled if a soc implementation does provide I/O operations.
We got a filesystem inconsistency issue below while running generic/475
I/O failure pressure test with fast_commit feature enabled.
Symlink /p3/d3/d1c/d6c/dd6/dce/l101 (inode #132605) is invalid.
If fast_commit feature is enabled, a special fast_commit journal area is
appended to the end of the normal journal area. The journal->j_last
point to the first unused block behind the normal journal area instead
of the whole log area, and the journal->j_fc_last point to the first
unused block behind the fast_commit journal area. While doing journal
recovery, do_one_pass(PASS_SCAN) should first scan the normal journal
area and turn around to the first block once it meet journal->j_last,
but the wrap() macro misuse the journal->j_fc_last, so the recovering
could not read the next magic block (commit block perhaps) and would end
early mistakenly and missing tN and every transaction after it in the
following example. Finally, it could lead to filesystem inconsistency.
| normal journal area | fast commit area |
+-------------------------------------------------+------------------+
| tN(rere) | tN+1 |~| tN-x |...| tN-1 | tN(front) | .... |
+-------------------------------------------------+------------------+
/ / /
start journal->j_last journal->j_fc_last
This patch fix it by use the correct ending journal->j_last.
The name of jbd_debug() is confusing as all functions inside jbd2 have
jbd2_ prefix. Rename jbd_debug() to jbd2_debug(). No functional changes.
Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Lukas Czerner <lczerner@redhat.com> Link: https://lore.kernel.org/r/20220608112355.4397-2-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 2dfba3bb40ad ("jbd2: correct the end of the journal recovery scan range") Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch kills t_handle_lock transaction spinlock completely from
jbd2.
To explain the reasoning, currently there were three sites at which
this spinlock was used.
1. jbd2_journal_wait_updates()
a. Based on careful code review it can be seen that, we don't need this
lock here. This is since we wait for any currently ongoing updates
based on a atomic variable t_updates. And we anyway don't take any
t_handle_lock while in stop_this_handle().
i.e.
write_lock(&journal->j_state_lock()
jbd2_journal_wait_updates() stop_this_handle()
while (atomic_read(txn->t_updates) { |
DEFINE_WAIT(wait); |
prepare_to_wait(); |
if (atomic_read(txn->t_updates) if (atomic_dec_and_test(txn->t_updates))
write_unlock(&journal->j_state_lock);
schedule(); wake_up()
write_lock(&journal->j_state_lock);
finish_wait();
}
txn->t_state = T_COMMIT
write_unlock(&journal->j_state_lock);
b. Also note that between atomic_inc(&txn->t_updates) in
start_this_handle() and jbd2_journal_wait_updates(), the
synchronization happens via read_lock(journal->j_state_lock) in
start_this_handle();
2. jbd2_journal_extend()
a. jbd2_journal_extend() is called with the handle of each process from
task_struct. So no lock required in updating member fields of handle_t
b. For member fields of h_transaction, all updates happens only via
atomic APIs (which is also within read_lock()).
So, no need of this transaction spinlock.
3. update_t_max_wait()
Based on Jan suggestion, this can be carefully removed using atomic
cmpxchg API.
Note that there can be several processes which are waiting for a new
transaction to be allocated and started. For doing this only one
process will succeed in taking write_lock() and allocating a new txn.
After that all of the process will be updating the t_max_wait (max
transaction wait time). This can be done via below method w/o taking
any locks using atomic cmpxchg.
For more details refer [1]
new = get_new_val();
old = READ_ONCE(ptr->max_val);
while (old < new)
old = cmpxchg(&ptr->max_val, old, new);
jbd2_journal_wait_updates() is called with j_state_lock held. But if
there is a commit in progress, then this transaction might get committed
and freed via jbd2_journal_commit_transaction() ->
jbd2_journal_free_transaction(), when we release j_state_lock.
So check for journal->j_running_transaction everytime we release and
acquire j_state_lock to avoid use-after-free issue.
Link: https://lore.kernel.org/r/948c2fed518ae739db6a8f7f83f1d58b504f87d0.1644497105.git.ritesh.list@gmail.com Fixes: 4f98186848707f53 ("jbd2: refactor wait logic for transaction updates into a common function") Cc: stable@kernel.org Reported-and-tested-by: syzbot+afa2ca5171d93e44b348@syzkaller.appspotmail.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 2dfba3bb40ad ("jbd2: correct the end of the journal recovery scan range") Signed-off-by: Sasha Levin <sashal@kernel.org>
No functionality change as such in this patch. This only refactors the
common piece of code which waits for t_updates to finish into a common
function named as jbd2_journal_wait_updates(journal_t *)
Printing to consoles can be deferred for several reasons:
- explicitly with printk_deferred()
- printk() in NMI context
- recursive printk() calls
The current implementation is not consistent. For printk_deferred(),
irq work is scheduled twice. For NMI und recursive, panic CPU
suppression and caller delays are not properly enforced.
Correct these inconsistencies by consolidating the deferred printing
code so that vprintk_deferred() is the top-level function for
deferred printing and vprintk_emit() will perform whichever irq_work
queueing is appropriate.
Also add kerneldoc for wake_up_klogd() and defer_console_output() to
clarify their differences and appropriate usage.
Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20230717194607.145135-6-john.ogness@linutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
For cases where icc_bw_set() can be called in callbaths that could
deadlock against shrinker/reclaim, such as runpm resume, we need to
decouple the icc locking. Introduce a new icc_bw_lock for cases where
we need to serialize bw aggregation and update to decouple that from
paths that require memory allocation such as node/link creation/
destruction.
Fixes this lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
6.2.0-rc8-debug+ #554 Not tainted
------------------------------------------------------
ring0/132 is trying to acquire lock: ffffff80871916d0 (&gmu->lock){+.+.}-{3:3}, at: a6xx_pm_resume+0xf0/0x234
but task is already holding lock: ffffffdb5aee57e8 (dma_fence_map){++++}-{0:0}, at: msm_job_run+0x68/0x150
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
According to the description in Documentation/core-api/kobject.rst:
- A ktype is the type of object that embeds a kobject. Every structure
that embeds a kobject needs a corresponding ktype.
So add sanity check to make sure kset->kobj.ktype is not NULL.
Some NXP processor using chipidea IP has a bug when frame babble is
detected.
As per 4.15.1.1.1 Serial Bus Babble:
A babble condition also exists if IN transaction is in progress at
High-speed SOF2 point. This is called frame babble. The host controller
must disable the port to which the frame babble is detected.
The USB controller has disabled the port (PE cleared) and has asserted
USBERRINT when frame babble is detected, but PEC is not asserted.
Therefore, the SW isn't aware that port has been disabled. Then the
SW keeps sending packets to this port, but all of the transfers will
fail.
This workaround will firstly assert PCD by SW when USBERRINT is detected
and then judge whether port change has really occurred or not by polling
roothub status. Because the PEC doesn't get asserted in our case, this
patch will also assert it by SW when specific conditions are satisfied.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20230809024432.535160-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The function lio_target_nacl_info_show() uses sprintf() in a loop to print
details for every iSCSI connection in a session without checking for the
buffer length. With enough iSCSI connections it's possible to overflow the
buffer provided by configfs and corrupt the memory.
This patch replaces sprintf() with sysfs_emit_at() that checks for buffer
boundries.
In function size_from_channelarray(), the return value 'bytes' is defined
as int type. However, the calcution of 'bytes' in this function is designed
to use the unsigned int type. So it is necessary to change 'bytes' type to
unsigned int to avoid integer overflow.
The size_from_channelarray() is called in main() function, its return value
is directly multipled by 'buf_len' and then used as the malloc() parameter.
The 'buf_len' is completely controllable by user, thus a multiplication
overflow may occur here. This could allocate an unexpected small area.
The device may be scheduled during the resume process,
so this cannot appear in atomic operations. Since
pm_runtime_set_active will resume suppliers, put set
active outside the spin lock, which is only used to
protect the struct cdns data structure, otherwise the
kernel will report the following warning:
BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1163
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 651, name: sh
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
CPU: 0 PID: 651 Comm: sh Tainted: G WC 6.1.20 #1
Hardware name: Freescale i.MX8QM MEK (DT)
Call trace:
dump_backtrace.part.0+0xe0/0xf0
show_stack+0x18/0x30
dump_stack_lvl+0x64/0x80
dump_stack+0x1c/0x38
__might_resched+0x1fc/0x240
__might_sleep+0x68/0xc0
__pm_runtime_resume+0x9c/0xe0
rpm_get_suppliers+0x68/0x1b0
__pm_runtime_set_status+0x298/0x560
cdns_resume+0xb0/0x1c0
cdns3_controller_resume.isra.0+0x1e0/0x250
cdns3_plat_resume+0x28/0x40
In gl861_i2c_master_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach gl861_i2c_master_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
In az6007_i2c_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach az6007_i2c_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
In anysee_master_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach anysee_master_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: add spaces around +] Signed-off-by: Sasha Levin <sashal@kernel.org>
In af9005_i2c_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach af9005_i2c_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
In dw2102_i2c_transfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach dw2102_i2c_transfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 950e252cb469
("[media] dw2102: limit messages to buffer size")
In af9035_i2c_master_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach af9035_i2c_master_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ moved variable declaration to fix build issues in older kernels - gregkh ] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The iMSI-RX module of the DW PCIe controller provides multiple sets of
MSI_CTRL_INT_i_* registers, and each set is capable of handling 32 MSI
interrupts. However, the fu740 PCIe controller driver only enabled one set
of MSI_CTRL_INT_i_* registers, as the total number of supported interrupts
was not specified.
Set the supported number of MSI vectors to enable all the MSI_CTRL_INT_i_*
registers on the fu740 PCIe core, allowing the system to fully utilize the
available MSI interrupts.
Link: https://lore.kernel.org/r/20230807055621.2431-1-yongxuan.wang@sifive.com Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If device_register() returns error in ibmebus_bus_init(), name of kobject
which is allocated in dev_set_name() called in device_add() is leaked.
As comment of device_add() says, it should call put_device() to drop
the reference count that was set in device_initialize() when it fails,
so the name can be freed in kobject_cleanup().
If a panic is triggered by a hrtimer interrupt all online cpus will be
notified and set offline. But as highlighted by commit 19dbdcb8039c
("smp: Warn on function calls from softirq context") this call should
not be made synchronous with disabled interrupts:
BUG: KASAN: double-free in slab_free mm/slub.c:3661 [inline]
BUG: KASAN: double-free in __kmem_cache_free+0x71/0x110 mm/slub.c:3674
Free of addr ffff88806f410000 by task syz-executor131/3632
JFS_IP(ipimap)->i_imap is not setting to NULL after free in diUnmount.
If jfs_remount() free JFS_IP(ipimap)->i_imap but then failed at diMount().
JFS_IP(ipimap)->i_imap will be freed once again.
Fix this problem by setting JFS_IP(ipimap)->i_imap to NULL after free.
Reported-by: syzbot+90a11e6b1e810785c6ff@syzkaller.appspotmail.com Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
JFS_SBI(ipbmap->i_sb)->bmap wasn't set to NULL after kfree() in
dbUnmount().
Syzkaller uses faultinject to reproduce this KASAN double-free
warning. The issue is triggered if either diMount() or dbMount() fail
in jfs_remount(), since diUnmount() or dbUnmount() already happened in
such a case - they will do double-free on next execution: jfs_umount
or jfs_remount.
Tested on both upstream and jfs-next by syzkaller.
Reported-and-tested-by: syzbot+6a93efb725385bc4b2e9@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000471f2d05f1ce8bad@google.com/T/ Link: https://syzkaller.appspot.com/bug?extid=6a93efb725385bc4b2e9 Signed-off-by: Andrew Kanner <andrew.kanner@gmail.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
I run a small server that uses external hard drives for backups. The
backup software I use uses ext2 filesystems with 4KiB block size and
the server is running SELinux and therefore relies on xattr. I recently
upgraded the hard drives from 4TB to 12TB models. I noticed that after
transferring some TBs I got a filesystem error "Freeing blocks not in
datazone - block = 18446744071529317386, count = 1" and the backup
process stopped. Trying to fix the fs with e2fsck resulted in a
completely corrupted fs. The error probably came from ext2_free_blocks(),
and because of the large number 18e19 this problem immediately looked
like some kind of integer overflow. Whereas the 4TB fs was about 1e9
blocks, the new 12TB is about 3e9 blocks. So, searching the ext2 code,
I came across the line in fs/ext2/xattr.c:745 where ext2_new_block()
is called and the resulting block number is stored in the variable block
as an int datatype. If a block with a block number greater than
INT32_MAX is returned, this variable overflows and the call to
sb_getblk() at line fs/ext2/xattr.c:750 fails, then the call to
ext2_free_blocks() produces the error.
Signed-off-by: Georg Ottinger <g.ottinger@gmx.at> Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230815100340.22121-1-g.ottinger@gmx.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
If rddev->raid_disk is greater than mddev->raid_disks, there will be
an out-of-bounds in raid1_remove_disk(). We have already found
similar reports as follows:
Enable the uart quirks similar to the earlier SoCs. Let's assume we are
likely going to need a k3 specific quirk mask separate from the earlier
SoCs, so let's not start changing the revision register mask at this point.
Note that SYSC_QUIRK_LEGACY_IDLE will be needed until we can remove the
need for pm_runtime_irq_safe() from 8250_omap driver.
The variable crtc->state->event is often protected by the lock
crtc->dev->event_lock when is accessed. However, it is accessed as a
condition of an if statement in exynos_drm_crtc_atomic_disable() without
holding the lock:
if (crtc->state->event && !crtc->state->active)
However, if crtc->state->event is changed to NULL by another thread right
after the conditions of the if statement is checked to be true, a
null-pointer dereference can occur in drm_crtc_send_vblank_event():
e->pipe = pipe;
To fix this possible null-pointer dereference caused by data race, the
spin lock coverage is extended to protect the if statement as well as the
function call to drm_crtc_send_vblank_event().
Reported-by: BassCheck <bass@buaa.edu.cn> Link: https://sites.google.com/view/basscheck/home Signed-off-by: Tuo Li <islituo@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Added relevant link. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why & How]
HDMI TMDS does not have ODM support. Filtering 420 modes that
exceed the 4096 FMT limitation on DCN31 will resolve
intermittent corruptions issues.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Rong Tao <rongtao@cestc.cn> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This bridge seems to need the HSE packet, otherwise the image is
shifted up and corrupted at the bottom. This makes the bridge
work with Samsung DSIM on i.MX8MM and i.MX8MP.
While technically some control frames like ACK are shorter and
end after Address 1, such frames shouldn't be forwarded through
wmediumd or similar userspace, so require the full 3-address
header to avoid accessing invalid memory if shorter frames are
passed in.
Reported-by: syzbot+b2645b5bf1512b81fa22@syzkaller.appspotmail.com Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When compiling with gcc 13 and CONFIG_FORTIFY_SOURCE=y, the following
warning appears:
In function ‘fortify_memcpy_chk’,
inlined from ‘size_entry_mwt’ at net/bridge/netfilter/ebtables.c:2118:2:
./include/linux/fortify-string.h:592:25: error: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Werror=attribute-warning]
592 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
where memcpy reads beyong &entry->watchers_offset to copy
{watchers,target,next}_offset altogether into offsets[]. Silence the
warning by wrapping these three up via struct_group().
The following message shows up when compiling with W=1:
In function ‘fortify_memcpy_chk’,
inlined from ‘alx_get_ethtool_stats’ at drivers/net/ethernet/atheros/alx/ethtool.c:297:2:
./include/linux/fortify-string.h:592:4: error: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Werror=attribute-warning]
592 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In order to get alx stats altogether, alx_get_ethtool_stats() reads
beyond hw->stats.rx_ok. Fix this warning by directly copying hw->stats,
and refactor the unnecessarily complicated BUILD_BUG_ON btw.
Errata ERR010450 only shows up if voltage is 1.8V, but if the device is
supplied by 3v3 the errata can be ignored. So let's check for if quirk
SDHCI_QUIRK2_NO_1_8_V is defined or not before limiting the frequency.
Cc: Jim Reinhart <jimr@tekvox.com> Cc: James Autry <jautry@tekvox.com> Cc: Matthew Maron <matthewm@tekvox.com> Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Acked-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20230811214853.8623-1-giulio.benetti@benettiengineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Similar to the transmission of TPM responses, also the transmission of TPM
commands may become corrupted. Instead of aborting when detecting such
issues, try resending the command again.
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
During NVMeTCP Authentication a controller can trigger a kernel
oops by specifying the 8192 bit Diffie Hellman group and passing
a correctly sized, but zeroed Diffie Hellamn value.
mpi_cmp_ui() was detecting this if the second parameter was 0,
but 1 is passed from dh_is_pubkey_valid(). This causes the null
pointer u->d to be dereferenced towards the end of mpi_cmp_ui()
Signed-off-by: Mark O'Donovan <shiftee@posteo.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y,
I've noticed the following:
In function ‘fortify_memcpy_chk’,
inlined from ‘wil_rx_crypto_check_edma’ at drivers/net/wireless/ath/wil6210/txrx_edma.c:566:2:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
529 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘fortify_memcpy_chk’,
inlined from ‘wil_rx_crypto_check’ at drivers/net/wireless/ath/wil6210/txrx.c:684:2:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
529 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In both cases, the fortification logic interprets 'memcpy()' as 6-byte
overread of 2-byte field 'pn_15_0' of 'struct wil_rx_status_extension'
and 'pn_15_0' of 'struct vring_rx_mac', respectively. To silence
these warnings, last two fields of the aforementioned structures
are grouped using 'struct_group_attr(pn, __packed' quirk.
When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y,
I've noticed the following:
In function ‘fortify_memcpy_chk’,
inlined from ‘mwifiex_construct_tdls_action_frame’ at drivers/net/wireless/marvell/mwifiex/tdls.c:765:3,
inlined from ‘mwifiex_send_tdls_action_frame’ at drivers/net/wireless/marvell/mwifiex/tdls.c:856:6:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
529 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and it happens because the fortification logic interprets this
as an attempt to overread 1-byte 'u.action.category' member of
'struct ieee80211_mgmt'. To silence this warning, it's enough
to pass an address of 'u.action' itself instead of an address
of its first member.
This also fixes an improper usage of 'sizeof()'. Since 'skb' is
extended with 'sizeof(mgmt->u.action.u.tdls_discover_resp) + 1'
bytes (where 1 is actually 'sizeof(mgmt->u.action.category)'),
I assume that the same number of bytes should be copied.
Suggested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230629085115.180499-2-dmantipov@yandex.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
ath_pci_probe() warn: argument 4 to %lx specifier is cast from pointer
ath_ahb_probe() warn: argument 4 to %lx specifier is cast from pointer
Fix it by modifying %lx to %p in the printk format string.
Note that with this change, the pointer address will be printed as a
hashed value by default. This is appropriate because the kernel
should not leak kernel pointers to user space in an informational
message. If someone wants to see the real address for debugging
purposes, this can be achieved with the no_hash_pointers kernel option.
When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y,
I've noticed the following:
In function ‘fortify_memcpy_chk’,
inlined from ‘ath_tx_complete_aggr’ at drivers/net/wireless/ath/ath9k/xmit.c:556:4,
inlined from ‘ath_tx_process_buffer’ at drivers/net/wireless/ath/ath9k/xmit.c:773:3:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
529 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘fortify_memcpy_chk’,
inlined from ‘ath_tx_count_frames’ at drivers/net/wireless/ath/ath9k/xmit.c:473:3,
inlined from ‘ath_tx_complete_aggr’ at drivers/net/wireless/ath/ath9k/xmit.c:572:2,
inlined from ‘ath_tx_process_buffer’ at drivers/net/wireless/ath/ath9k/xmit.c:773:3:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
529 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In both cases, the compiler complains on:
memcpy(ba, &ts->ba_low, WME_BA_BMP_SIZE >> 3);
which is the legal way to copy both 'ba_low' and following 'ba_high'
members of 'struct ath_tx_status' at once (that is, issue one 8-byte
'memcpy()' for two 4-byte fields). Since the fortification logic seems
interprets this trick as an attempt to overread 4-byte 'ba_low', silence
relevant warnings by using the convenient 'struct_group()' quirk.
Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230620080855.396851-2-dmantipov@yandex.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
Direct replacement is safe here since return value of -errno
is used to check for truncation instead of sizeof(dest).
The checks in question were introduced by:
commit 6b4db2e528f6 ("devlink: Fix use-after-free after a failed reload").
That fixed an issue of reload with mlxsw driver.
Back then, that was a valid fix, because there was a limitation
in place that prevented drivers from registering/unregistering params
when devlink instance was registered.
It was possible to do the fix differently by changing drivers to
register/unregister params in appropriate places making sure the ops
operate only on memory which is allocated and initialized. But that,
as a dependency, would require to remove the limitation mentioned above.
Eventually, this limitation was lifted by:
commit 1d18bb1a4ddd ("devlink: allow registering parameters after the instance")
Also, the alternative fix (which also fixed another issue) was done by:
commit 74cbc3c03c82 ("mlxsw: spectrum_acl_tcam: Move devlink param to TCAM code").
Therefore, the checks are no longer relevant. Each driver should make
sure to have the params registered only when the memory the ops
are working with is allocated and initialized.
So remove the checks.
Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If a badly constructed firmware includes multiple `ACPI_TYPE_PACKAGE`
objects while evaluating the AMD LPS0 _DSM, there will be a memory
leak. Explicitly guard against this.
Suggested-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Arm platforms use is_default_overflow_handler() to determine if the
hw_breakpoint code should single-step over the breakpoint trigger or
let the custom handler deal with it.
Since bpf_overflow_handler() currently isn't recognized as a default
handler, attaching a BPF program to a PERF_TYPE_BREAKPOINT event causes
it to keep firing (the instruction triggering the data abort exception
is never skipped). For example:
# bpftrace -e 'watchpoint:0x10000:4:w { print("hit") }' -c ./test
Attaching 1 probe...
hit
hit
[...]
^C
(./test performs a single 4-byte store to 0x10000)
This patch replaces the check with uses_default_overflow_handler(),
which accounts for the bpf_overflow_handler() case by also testing
if one of the perf_event_output functions gets invoked indirectly,
via orig_default_handler.
For i.MX8MP, we cannot ensure that cycle counter overflow occurs at least
4 times as often as other events. Due to byte counters will count for any
event configured, it will overflow more often. And if byte counters
overflow that related counters would stop since they share the
COUNTER_CNTL. We can speed up cycle counter overflow frequency by setting
counter parameter (CP) field of cycle counter. In this way, we can avoid
stop counting byte counters when interrupt didn't come and the byte
counters can be fetched or updated from each cycle counter overflow
interrupt.
Because we initialize CP filed to shorten counter0 overflow time, the cycle
counter will start couting from a fixed/base value each time. We need to
remove the base from the result too. Therefore, we could get precise result
from cycle counter.
Some HiSilicon SMMU PMCG suffers the erratum 162001900 that the PMU
disable control sometimes fail to disable the counters. This will lead
to error or inaccurate data since before we enable the counters the
counter's still counting for the event used in last perf session.
This patch tries to fix this by hardening the global disable process.
Before disable the PMU, writing an invalid event type (0xffff) to
focibly stop the counters. Correspondingly restore each events on
pmu::pmu_enable().
Kernels built with CONFIG_KASAN=y quarantine newly freed memory in order
to better detect use-after-free errors. However, this can exhaust memory
more quickly in allocator-heavy tests, which can result in spurious
scftorture failure. This commit therefore forgives memory-allocation
failure in kernels built with CONFIG_KASAN=y, but continues counting
the errors for use in detailed test-result analyses.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The rcuscale.holdoff module parameter can be used to delay the start
of rcu_scale_writer() kthread. However, the hung-task timeout will
trigger when the timeout specified by rcuscale.holdoff is greater than
hung_task_timeout_secs:
Instead of calling __put_task_struct() directly, we defer it using
call_rcu(). A more natural approach would use a workqueue, but since
in PREEMPT_RT, we can't allocate dynamic memory from atomic context,
the code would become more complex because we would need to put the
work_struct instance in the task_struct and initialize it when we
allocate a new task_struct.
The issue is reproducible with stress-ng:
while true; do
stress-ng --sched deadline --sched-period 1000000000 \
--sched-runtime 800000000 --sched-deadline \ 1000000000 --mmapfork 23 -t 20
done
Reported-by: Hu Chunyu <chuhu@redhat.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Valentin Schneider <vschneid@redhat.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Wander Lairson Costa <wander@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20230614122323.37957-2-wander@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
According to the ACPI specification 19.6.134, no argument is required to be passed for ASL Timer instruction. For taking care of no argument, AML_NO_OPERAND_RESOLVE flag is added to ASL Timer instruction opcode.
When ASL timer instruction interpreted by ACPI interpreter, getting error. After adding AML_NO_OPERAND_RESOLVE flag to ASL Timer instruction opcode, issue is not observed.
=============================================================
UBSAN: array-index-out-of-bounds in acpica/dswexec.c:401:12 index -1 is out of range for type 'union acpi_operand_object *[9]'
CPU: 37 PID: 1678 Comm: cat Not tainted
6.0.0-dev-th500-6.0.y-1+bcf8c46459e407-generic-64k
HW name: NVIDIA BIOS v1.1.1-d7acbfc-dirty 12/19/2022 Call trace:
dump_backtrace+0xe0/0x130
show_stack+0x20/0x60
dump_stack_lvl+0x68/0x84
dump_stack+0x18/0x34
ubsan_epilogue+0x10/0x50
__ubsan_handle_out_of_bounds+0x80/0x90
acpi_ds_exec_end_op+0x1bc/0x6d8
acpi_ps_parse_loop+0x57c/0x618
acpi_ps_parse_aml+0x1e0/0x4b4
acpi_ps_execute_method+0x24c/0x2b8
acpi_ns_evaluate+0x3a8/0x4bc
acpi_evaluate_object+0x15c/0x37c
acpi_evaluate_integer+0x54/0x15c
show_power+0x8c/0x12c [acpi_power_meter]
Link: https://github.com/acpica/acpica/commit/90310989 Signed-off-by: Abhishek Mainkar <abmainkar@nvidia.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As following backtrace, the struct file_lock request , in posix_lock_inode
is free before ftrace function using.
Replace the ftrace function ahead free flow could fix the use-after-free
issue.
[BUG]
Syzbot reported several warning triggered inside
lookup_inline_extent_backref().
[CAUSE]
As usual, the reproducer doesn't reliably trigger locally here, but at
least we know the WARN_ON() is triggered when an inline backref can not
be found, and it can only be triggered when @insert is true. (I.e.
inserting a new inline backref, which means the backref should already
exist)
[ENHANCEMENT]
After the WARN_ON(), dump all the parameters and the extent tree
leaf to help debug.
Link: https://syzkaller.appspot.com/bug?extid=d6f9ff86c1d804ba2bc6 Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>