Alex reported invalid page pointer returned with pin_user_pages_remote()
from vfio after upstream commit 4b6c33b32296 ("vfio/type1: Prepare for
batched pinning with struct vfio_batch").
It turns out that it's not the fault of the vfio commit; however after
vfio switches to a full page buffer to store the page pointers it starts
to expose the problem easier.
The problem is for VM_PFNMAP vmas we should normally fail with an
-EFAULT then vfio will carry on to handle the MMIO regions. However
when the bug triggered, follow_page_mask() returned -EEXIST for such a
page, which will jump over the current page, leaving that entry in
**pages untouched. However the caller is not aware of it, hence the
caller will reference the page as usual even if the pointer data can be
anything.
We had that -EEXIST logic since commit 1027e4436b6a ("mm: make GUP
handle pfn mapping unless FOLL_GET is requested") which seems very
reasonable. It could be that when we reworked GUP with FOLL_PIN we
could have overlooked that special path in commit 3faa52c03f44 ("mm/gup:
track FOLL_PIN pages"), even if that commit rightfully touched up
follow_devmap_pud() on checking FOLL_PIN when it needs to return an
-EEXIST.
Attaching the Fixes to the FOLL_PIN rework commit, as it happened later
than 1027e4436b6a.
[jhubbard@nvidia.com: added some tags, removed a reference to an out of tree module.]
Link: https://lkml.kernel.org/r/20220207062213.235127-1-jhubbard@nvidia.com Link: https://lkml.kernel.org/r/20220204020010.68930-1-jhubbard@nvidia.com Link: https://lkml.kernel.org/r/20220204020010.68930-2-jhubbard@nvidia.com Fixes: 3faa52c03f44 ("mm/gup: track FOLL_PIN pages") Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reported-by: Alex Williamson <alex.williamson@redhat.com> Debugged-by: Alex Williamson <alex.williamson@redhat.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: David Hildenbrand <david@redhat.com> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
user_shm_lock forgets to set allowed to 0 when get_ucounts fails. So
the later user_shm_unlock might do the extra dec_rlimit_ucounts. Fix
this by resetting allowed to 0.
Link: https://lkml.kernel.org/r/20220310132417.41189-1-linmiaohe@huawei.com Fixes: d7c9e99aee48 ("Reimplement RLIMIT_MEMLOCK on top of ucounts") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Herbert van den Bergh <herbert.van.den.bergh@oracle.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When an uncorrected memory error is consumed there is a race between the
CMCI from the memory controller reporting an uncorrected error with a
UCNA signature, and the core reporting and SRAR signature machine check
when the data is about to be consumed.
If the CMCI wins that race, the page is marked poisoned when
uc_decode_notifier() calls memory_failure() and the machine check
processing code finds the page already poisoned. It calls
kill_accessing_process() to make sure a SIGBUS is sent. But returns the
wrong error code.
Console log looks like this:
mce: Uncorrected hardware memory error in user-access at 3710b3400
Memory failure: 0x3710b3: recovery action for dirty LRU page: Recovered
Memory failure: 0x3710b3: already hardware poisoned
Memory failure: 0x3710b3: Sending SIGBUS to einj_mem_uc:361438 due to hardware memory corruption
mce: Memory error not recovered
kill_accessing_process() is supposed to return -EHWPOISON to notify that
SIGBUS is already set to the process and kill_me_maybe() doesn't have to
send it again. But current code simply fails to do this, so fix it to
make sure to work as intended. This change avoids the noise message
"Memory error not recovered" and skips duplicate SIGBUSs.
[tony.luck@intel.com: reword some parts of commit message]
Link: https://lkml.kernel.org/r/20220113231117.1021405-1-naoya.horiguchi@linux.dev Fixes: a3f5d80ea401 ("mm,hwpoison: send SIGBUS with error virutal address") Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reported-by: Youquan Song <youquan.song@intel.com> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
userfaultfd calls mcopy_atomic_pte() and __mcopy_atomic() which do not
do any cache flushing for the target page. Then the target page will be
mapped to the user space with a different address (user address), which
might have an alias issue with the kernel address used to copy the data
from the user to. Fix this by insert flush_dcache_page() after
copy_from_user() succeeds.
Link: https://lkml.kernel.org/r/20220210123058.79206-7-songmuchun@bytedance.com Fixes: b6ebaedb4cb1 ("userfaultfd: avoid mmap_sem read recursion in mcopy_atomic") Fixes: c1a4de99fada ("userfaultfd: mcopy_atomic|mfill_zeropage: UFFDIO_COPY|UFFDIO_ZEROPAGE preparation") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lars Persson <lars.persson@axis.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
userfaultfd calls shmem_mfill_atomic_pte() which does not do any cache
flushing for the target page. Then the target page will be mapped to
the user space with a different address (user address), which might have
an alias issue with the kernel address used to copy the data from the
user to. Insert flush_dcache_page() in non-zero-page case. And replace
clear_highpage() with clear_user_highpage() which already considers the
cache maintenance.
Link: https://lkml.kernel.org/r/20220210123058.79206-6-songmuchun@bytedance.com Fixes: 8d1039634206 ("userfaultfd: shmem: add shmem_mfill_zeropage_pte for userfaultfd support") Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lars Persson <lars.persson@axis.com> Cc: Peter Xu <peterx@redhat.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
userfaultfd calls copy_huge_page_from_user() which does not do any cache
flushing for the target page. Then the target page will be mapped to
the user space with a different address (user address), which might have
an alias issue with the kernel address used to copy the data from the
user to.
Fix this issue by flushing dcache in copy_huge_page_from_user().
Link: https://lkml.kernel.org/r/20220210123058.79206-4-songmuchun@bytedance.com Fixes: fa4d75c1de13 ("userfaultfd: hugetlbfs: add copy_huge_page_from_user for hugetlb userfaultfd support") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lars Persson <lars.persson@axis.com> Cc: Peter Xu <peterx@redhat.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The D-cache maintenance inside move_to_new_page() only consider one
page, there is still D-cache maintenance issue for tail pages of
compound page (e.g. THP or HugeTLB).
THP migration is only enabled on x86_64, ARM64 and powerpc, while
powerpc and arm64 need to maintain the consistency between I-Cache and
D-Cache, which depends on flush_dcache_page() to maintain the
consistency between I-Cache and D-Cache.
But there is no issues on arm64 and powerpc since they already considers
the compound page cache flushing in their icache flush function.
HugeTLB migration is enabled on arm, arm64, mips, parisc, powerpc,
riscv, s390 and sh, while arm has handled the compound page cache flush
in flush_dcache_page(), but most others do not.
In theory, the issue exists on many architectures. Fix this by not
using flush_dcache_folio() since it is not backportable.
Link: https://lkml.kernel.org/r/20220210123058.79206-3-songmuchun@bytedance.com Fixes: 290408d4a250 ("hugetlb: hugepage migration core") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lars Persson <lars.persson@axis.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
udf_write_fi() uses lengthOfImpUse of the entry it is writing to.
However this field has not yet been initialized so it either contains
completely bogus value or value from last directory entry at that place.
In either case this is wrong and can lead to filesystem corruption or
kernel crashes.
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com> CC: stable@vger.kernel.org Fixes: 979a6e28dd96 ("udf: Get rid of 0-length arrays in struct fileIdentDesc") Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The definition of RFKILL_IOCTL_MAX_SIZE introduced by commit 54f586a91532 ("rfkill: make new event layout opt-in") is unusable
since it is based on RFKILL_IOC_EXT_SIZE which has not been defined.
Fix that by replacing the undefined constant with the constant which
is intended to be used in this definition.
Fixes: 54f586a91532 ("rfkill: make new event layout opt-in") Cc: stable@vger.kernel.org # 5.11+ Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org> Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Link: https://lore.kernel.org/r/20220506172454.120319-1-glebfm@altlinux.org
[add commit message provided later by Dmitry] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set a size limit of 8 bytes of the written buffer to "hdev->name"
including the terminating null byte, as the size of "hdev->name" is 8
bytes. If an id value which is greater than 9999 is allocated,
then the "snprintf(hdev->name, sizeof(hdev->name), "hci%d", id)"
function call would lead to a truncation of the id value in decimal
notation.
Set an explicit maximum id parameter in the id allocation function call.
The id allocation function defines the maximum allocated id value as the
maximum id parameter value minus one. Therefore, HCI_MAX_ID is defined
as 10000.
Signed-off-by: Itay Iellin <ieitayie@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since not all compilers have a function attribute to disable KCOV
instrumentation, objtool can rewrite KCOV instrumentation in noinstr
functions as per commit:
In that when a tail-call instrucion is replaced with a RET an
additional INT3 instruction is also written, but is not represented in
the decoded instruction stream.
This then leads to false positive missing INT3 objtool warnings in
noinstr code.
Instead of adding additional struct instruction objects, mark the RET
instruction with retpoline_safe to suppress the warning (since we know
there really is an INT3).
Due to being a perl generated asm file, it got missed by the mass
convertion script.
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: poly1305_init_x86_64()+0x3a: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: poly1305_blocks_x86_64()+0xf2: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: poly1305_emit_x86_64()+0x37: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: __poly1305_block()+0x6d: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: __poly1305_init_avx()+0x1e8: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: poly1305_blocks_avx()+0x18a: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: poly1305_blocks_avx()+0xaf8: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: poly1305_emit_avx()+0x99: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: poly1305_blocks_avx2()+0x18a: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: poly1305_blocks_avx2()+0x776: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: poly1305_blocks_avx512()+0x18a: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: poly1305_blocks_avx512()+0x796: missing int3 after ret
arch/x86/crypto/poly1305-x86_64-cryptogams.o: warning: objtool: poly1305_blocks_avx512()+0x10bd: missing int3 after ret
Fixes: f94909ceb1ed ("x86: Prepare asm files for straight-line-speculation") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit in Fixes started adding INT3 after RETs as a mitigation
against straight-line speculation.
The fastop SETcc implementation in kvm's insn emulator uses macro magic
to generate all possible SETcc functions and to jump to them when
emulating the respective instruction.
However, it hardcodes the size and alignment of those functions to 4: a
three-byte SETcc insn and a single-byte RET. BUT, with SLS, there's an
INT3 that gets slapped after the RET, which brings the whole scheme out
of alignment:
15: 0f 90 c0 seto %al
18: c3 ret
19: cc int3
1a: 0f 1f 00 nopl (%rax)
1d: 0f 91 c0 setno %al
20: c3 ret
21: cc int3
22: 0f 1f 00 nopl (%rax)
25: 0f 92 c0 setb %al
28: c3 ret
29: cc int3
Raise the alignment value when SLS is enabled and use a macro for that
instead of hard-coding naked numbers.
Fixes: e463a09af2f0 ("x86: Add straight-line-speculation mitigation") Reported-by: Jamie Heilman <jamie@audible.transient.net> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Jamie Heilman <jamie@audible.transient.net> Link: https://lore.kernel.org/r/YjGzJwjrvxg5YZ0Z@audible.transient.net
[Add a comment and a bit of safety checking, since this is going to be changed
again for IBT support. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
f94909ceb1ed4bfd ("x86: Prepare asm files for straight-line-speculation")
It silences these perf tools build warnings, no change in the tools:
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
Warning: Kernel ABI header at 'tools/arch/x86/lib/memset_64.S' differs from latest version at 'arch/x86/lib/memset_64.S'
diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S
The code generated was checked before and after using 'objdump -d /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o',
no changes.
Commit b1a1a1a09b46 ("kbuild: lto: postpone objtool") moved objtool_args
to Makefile.lib, so the arguments can be used in Makefile.modfinal as
well as Makefile.build.
With commit 850ded46c642 ("kbuild: Fix TRIM_UNUSED_KSYMS with
LTO_CLANG"), module LTO linking came back to scripts/Makefile.build
again.
So, there is no more reason to keep objtool_args in a separate file.
Get it back to the original place, close to the objtool command.
Currently, text_poke_bp() is very strict to only allow patching a
single instruction; however with straight-line-speculation it will be
required to patch: ret; int3, which is two instructions.
As such, relax the constraints a little to allow int3 padding for all
instructions that do not imply the execution of the next instruction,
ie: RET, JMP.d8 and JMP.d32.
While there, rename the text_poke_loc::rel32 field to ::disp.
Note: this fills up the text_poke_loc structure which is now a round
16 bytes big.
[ bp: Put comments ontop instead of on the side. ]
Update the comment about what happens when link goes down after we have
checked for link-up. If a PIO request is done while link-down, we have
a serious problem.
Link: https://lore.kernel.org/r/20220110015018.26359-23-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Callback for irq_mask_ack() is the same as for irq_mask(). As there is no
special handling for irq_ack(), there is no need to define irq_mask_ack()
too.
Link: https://lore.kernel.org/r/20220110015018.26359-20-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emulated root bridge currently provides only one Legacy INTA interrupt
which is used for reporting PCIe PME and ERR events and handled by kernel
PCIe PME and AER drivers.
Aardvark HW reports these PME and ERR events separately, so there is no
need to mix real INTA interrupt and emulated INTA interrupt for PCIe PME
and AER drivers.
Register a new advk-RP (as in Root Port) irq chip and a new irq domain
for emulated root bridge and use this new separate irq domain for
providing INTA interrupt from emulated root bridge for PME and ERR events.
The real INTA interrupt from real devices is now separate.
A custom map_irq callback function on PCI host bridge structure is used to
allocate IRQ mapping for emulated root bridge from new irq domain. Original
callback of_irq_parse_and_map_pci() is used for all other devices as before.
Link: https://lore.kernel.org/r/20220110015018.26359-19-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable aardvark PME interrupt unconditionally by unmasking it and read PME
requester ID to emulated bridge config space immediately after receiving
interrupt.
PME requester ID is stored in the PCIE_MSG_LOG_REG register, which contains
the last inbound message. So when new inbound message is received by HW
(including non-PM), the content in PCIE_MSG_LOG_REG register is replaced by
a new value.
PCIe specification mandates that subsequent PMEs are kept pending until the
PME Status Register bit is cleared by software by writing a 1b.
Support for masking/unmasking PME interrupt on emulated bridge via
PCI_EXP_RTCTL_PMEIE bit is now implemented only in emulated bridge config
space, to ensure that we do not miss any aardvark PME interrupt.
Reading of PCI_EXP_RTCAP and PCI_EXP_RTSTA registers is simplified as final
value is now always stored into emulated bridge config space by the
interrupt handler, so there is no need to implement support for these
registers in read_pcie callback.
Clearing of W1C bit PCI_EXP_RTSTA_PME is now also simplified as it is done
by pci-bridge-emul.c code for emulated bridge config space. So there is no
need to implement support for clearing this bit in write_pcie callback.
Link: https://lore.kernel.org/r/20220110015018.26359-18-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently enabling PCI_EXP_RTSTA_PME bit in PCI_EXP_RTCTL register does
nothing. This is because PCIe PME driver expects to receive PCIe interrupt
defined in PCI_EXP_FLAGS_IRQ register, but aardvark hardware does not
trigger PCIe INTx/MSI interrupt for PME event, rather it triggers custom
aardvark interrupt which this driver is not processing yet.
Fix this issue by handling PME interrupt in advk_pcie_handle_int() and
chaining it to PCIe interrupt 0 with generic_handle_domain_irq() (since
aardvark sets PCI_EXP_FLAGS_IRQ to zero). With this change PCIe PME driver
finally starts receiving PME interrupt.
Link: https://lore.kernel.org/r/20220110015018.26359-17-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To optimize advk_pci_bridge_emul_pcie_conf_write() code, touch
PCIE_ISR0_REG and PCIE_ISR0_MASK_REG registers only when it is really
needed, when processing PCI_EXP_RTCTL_PMEIE and PCI_EXP_RTSTA_PME bits.
Link: https://lore.kernel.org/r/20220110015018.26359-16-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ERR interrupt is triggered when corresponding bit is unmasked in both ISR0
and PCI_EXP_DEVCTL registers. Unmasking ERR bits in PCI_EXP_DEVCTL register
is not enough. This means that currently the ERR interrupt is never
triggered.
Unmask ERR bits in ISR0 register at driver probe time. ERR interrupt is not
triggered until ERR bits are unmasked also in PCI_EXP_DEVCTL register,
which is done by AER driver. So it is safe to unconditionally unmask all
ERR bits in aardvark probe.
Aardvark HW sets PCI_ERR_ROOT_AER_IRQ to zero and when corresponding bits
in ISR0 and PCI_EXP_DEVCTL are enabled, the HW triggers a generic interrupt
on GIC. Chain this interrupt to PCIe interrupt 0 with
generic_handle_domain_irq() to allow processing of ERR interrupts.
Link: https://lore.kernel.org/r/20220110015018.26359-14-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to PCI 3.0 specification, sending both MSI and MSI-X interrupts
is done by DWORD memory write operation to doorbell message address. The
write operation for MSI has zero upper 16 bits and the MSI interrupt number
in the lower 16 bits, while the write operation for MSI-X contains a 32-bit
value from MSI-X table.
Since the driver only uses interrupt numbers from range 0..31, the upper
16 bits of the DWORD memory write operation to doorbell message address
are zero even for MSI-X interrupts. Thus we can enable MSI-X interrupts.
Testing proves that kernel can correctly receive MSI-X interrupts from PCIe
cards which supports both MSI and MSI-X interrupts.
Link: https://lore.kernel.org/r/20220110015018.26359-13-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MSI address for receiving MSI interrupts needs to be correctly set before
enabling processing of MSI interrupts.
Move code for setting PCIE_MSI_ADDR_LOW_REG and PCIE_MSI_ADDR_HIGH_REG
from advk_pcie_init_msi_irq_domain() to advk_pcie_setup_hw(), before
enabling PCIE_CORE_CTRL2_MSI_ENABLE.
After this we can remove the now unused member msi_msg, which was used
only for MSI doorbell address. MSI address can be any address which cannot
be used to DMA to. So change it to the address of the main struct advk_pcie.
Link: https://lore.kernel.org/r/20220110015018.26359-12-kabel@kernel.org Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org # f21a8b1b6837 ("PCI: aardvark: Move to MSI handling using generic MSI support") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor the masking of ISR0/1 Sources and unmasking of summary MSI interrupt
so that it corresponds to the comments:
- first mask all ISR0/1
- then unmask all MSIs
- then unmask summary MSI interrupt
Link: https://lore.kernel.org/r/20220110015018.26359-10-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use simple
dev_fwnode(dev)
instead of
struct device_node *node = dev->of_node;
of_node_to_fwnode(node)
especially since the node variable is not used elsewhere in the function.
Link: https://lore.kernel.org/r/20220110015018.26359-9-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In [1] it was agreed that we should use struct irq_chip as a global
static struct in the driver. Even though the structure currently
contains a dynamic member (parent_device), In [2] the plans to kill it
and make the structure completely static were set out.
Convert Aardvark's priv->msi_bottom_irq_chip and priv->msi_irq_chip to
static driver structure.
Rewrite the code to use irq_set_chained_handler_and_data() handler with
chained_irq_enter() and chained_irq_exit() processing instead of using
devm_request_irq().
advk_pcie_irq_handler() reads IRQ status bits and calls other functions
based on which bits are set. These functions then read its own IRQ status
bits and calls other aardvark functions based on these bits. Finally
generic_handle_domain_irq() with translated linux IRQ numbers are called.
Link: https://lore.kernel.org/r/20220110015018.26359-5-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Put the PCIe card into reset by asserting PERST# signal when unbinding
driver. It doesn't make sense to leave the card working if it can't
communicate with the host. This should also save some power.
Link: https://lore.kernel.org/r/20211130172913.9727-10-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Free config space for emulated root bridge when unbinding driver to fix
memory leak. Do it after disabling and masking all interrupts, since
aardvark interrupt handler accesses config space of emulated root
bridge.
Link: https://lore.kernel.org/r/20211130172913.9727-9-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI aardvark hardware supports access to DEVCAP2, DEVCTL2, LNKCAP2 and
LNKCTL2 configuration registers of PCIe core via PCIE_CORE_PCIEXP_CAP.
Export them via emulated software root bridge.
Link: https://lore.kernel.org/r/20211130172913.9727-4-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pci-bridge-emul driver already allocates buffer for capabilities up to the
PCI_EXP_SLTSTA2 register, but does not define bit access behavior for these
registers. Add these missing definitions.
Link: https://lore.kernel.org/r/20211130172913.9727-3-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Time limit only makes sense when callbacks are serviced in softirq mode
because:
_ In case we need to get back to the scheduler,
cond_resched_tasks_rcu_qs() is called after each callback.
_ In case some other softirq vector needs the CPU, the call to
local_bh_enable() before cond_resched_tasks_rcu_qs() takes care about
them via a call to do_softirq().
Therefore, make sure the time limit only applies to softirq mode.
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Tested-by: Valentin Schneider <valentin.schneider@arm.com> Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Neeraj Upadhyay <neeraju@codeaurora.org> Cc: Uladzislau Rezki <urezki@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[UR: backport to 5.15-stable] Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The callbacks processing time limit makes sure we are not exceeding a
given amount of time executing the queue.
However its "continue" clause bypasses the cond_resched() call on
rcuc and NOCB kthreads, delaying it until we reach the limit, which can
be very long...
Make sure the scheduler has a higher priority than the time limit.
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Tested-by: Valentin Schneider <valentin.schneider@arm.com> Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Neeraj Upadhyay <neeraju@codeaurora.org> Cc: Uladzislau Rezki <urezki@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[UR: backport to 5.15-stable + commit update] Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SD spec definition:
"Host provides at least 74 Clocks before issuing first command"
After 1ms for the voltage stable then start issuing the Clock signals
if POWER STATE is
MMC_POWER_OFF to MMC_POWER_UP to issue Clock signal to card
MMC_POWER_UP to MMC_POWER_ON to stop issuing signal to card
Because mremap does not have a MAP_FIXED_NOREPLACE flag, it can destroy
existing mappings. This causes a segfault when regions such as text are
remapped and the permissions are changed.
Verify the requested mremap destination address does not overlap any
existing mappings by using mmap's MAP_FIXED_NOREPLACE flag. Keep
incrementing the destination address until a valid mapping is found or
fail the current test once the max address is reached.
Avoid calling mmap with requested addresses that are less than the
system's mmap_min_addr. When run as root, mmap returns EACCES when
trying to map addresses < mmap_min_addr. This is not one of the error
codes for the condition to retry the mmap in the test.
Rather than arbitrarily retrying on EACCES, don't attempt an mmap until
addr > vm.mmap_min_addr.
Add a munmap call after an alignment check as the mappings are retained
after the retry and can reach the vm.max_map_count sysctl.
As commit 0c5f81dad46 ("KVM: LAPIC: Inject timer interrupt via posted
interrupt") mentioned that the host admin should well tune the guest
setup, so that vCPUs are placed on isolated pCPUs, and with several pCPUs
surplus for *busy* housekeeping. In this setup, it is preferrable to
disable mwait/hlt/pause vmexits to keep the vCPUs in non-root mode.
However, if only some guests isolated and others not, they would not
have any benefit from posted timer interrupts, and at the same time lose
VMX preemption timer fast paths because kvm_can_post_timer_interrupt()
returns true and therefore forces kvm_can_use_hv_timer() to false.
By guaranteeing that posted-interrupt timer is only used if MWAIT or
HLT are done without vmexit, KVM can make a better choice and use the
VMX preemption timer and the corresponding fast paths.
Reported-by: Aili Yao <yaoaili@kingsoft.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Cc: Aili Yao <yaoaili@kingsoft.com> Cc: Sean Christopherson <seanjc@google.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1643112538-36743-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
WARN and bail if KVM attempts to free a root that isn't backed by a shadow
page. KVM allocates a bare page for "special" roots, e.g. when using PAE
paging or shadowing 2/3/4-level page tables with 4/5-level, and so root_hpa
will be valid but won't be backed by a shadow page. It's all too easy to
blindly call mmu_free_root_page() on root_hpa, be nice and WARN instead of
crashing KVM and possibly the kernel.
Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Emulating writes to SELF_IPI with a write to ICR has an unwanted side effect:
the value of ICR in vAPIC page gets changed. The lists SELF_IPI as write-only,
with no associated MMIO offset, so any write should have no visible side
effect in the vAPIC page.
Reported-by: Chao Gao <chao.gao@intel.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
MSR_KVM_POLL_CONTROL is cleared on reset, thus reverting guests to
host-side polling after suspend/resume. Non-bootstrap CPUs are
restored correctly by the haltpoll driver because they are hot-unplugged
during suspend and hot-plugged during resume; however, the BSP
is not hotpluggable and remains in host-sde polling mode after
the guest resume. The makes the guest pay for the cost of vmexits
every time the guest enters idle.
Fix it by recording BSP's haltpoll state and resuming it during guest
resume.
Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1650267752-46796-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Populating memory : 0.684014577s
Writing to populated memory : 0.006230175s
Reading from populated memory : 0.004557805s
==== Test Assertion Failure ====
lib/kvm_util.c:1411: false
pid=125806 tid=125809 errno=4 - Interrupted system call
1 0x0000000000402f7c: addr_gpa2hva at kvm_util.c:1411
2 (inlined by) addr_gpa2hva at kvm_util.c:1405
3 0x0000000000401f52: lookup_pfn at access_tracking_perf_test.c:98
4 (inlined by) mark_vcpu_memory_idle at access_tracking_perf_test.c:152
5 (inlined by) vcpu_thread_main at access_tracking_perf_test.c:232
6 0x00007fefe9ff81ce: ?? ??:0
7 0x00007fefe9c64d82: ?? ??:0
No vm physical memory at 0xffbffff000
I can easily reproduce it with a Intel(R) Xeon(R) CPU E5-2630 with 46 bits
PA.
It turns out that the address translation for clearing idle page tracking
returned a wrong result; addr_gva2gpa()'s last step, which is based on
"pte[index[0]].pfn", did the calculation with 40 bits length and the
high 12 bits got truncated. In above case the GPA address to be returned
should be 0x3fffbffff000 for GVA 0xc0000000, but it got truncated into
0xffbffff000 and the subsequent gpa2hva lookup failed.
The width of operations on bit fields greater than 32-bit is
implementation defined, and differs between GCC (which uses the bitfield
precision) and clang (which uses 64-bit arithmetic), so this is a
potential minefield. Remove the bit fields and using manual masking
instead.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2075036 Reported-by: Nana Liu <nanliu@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Tested-by: Peter Xu <peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Referenced change added check to skip updating fib when new fib instance
has same or lower priority. However, new fib instance can be an update on
same dst address as existing one even though the structure is another
instance that has different address. Ignoring events on such instances
causes multipath LAG state to not be correctly updated.
Track 'dst' and 'dst_len' fields of fib event fib_entry_notifier_info
structure and don't skip events that have the same value of that fields.
Referenced change incorrectly sets single path fib_info even when LAG is
not active. Fix it by moving call to mlx5_lag_fib_set() into conditional
that verifies LAG state.
Recent commit that modified fib route event handler to handle events
according to their priority introduced use-after-free[0] in mp->mfi pointer
usage. The pointer now is not just cached in order to be compared to
following fib_info instances, but is also dereferenced to obtain
fib_priority. However, since mlx5 lag code doesn't hold the reference to
fin_info during whole mp->mfi lifetime, it could be used after fib_info
instance has already been freed be kernel infrastructure code.
Don't ever dereference mp->mfi pointer. Refactor it to be 'const void*'
type and cache fib_info priority in dedicated integer. Group
fib_info-related data into dedicated 'fib' structure that will be further
extended by following patches in the series.
[0]:
[ 203.588029] ==================================================================
[ 203.590161] BUG: KASAN: use-after-free in mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core]
[ 203.592386] Read of size 4 at addr ffff888144df2050 by task kworker/u20:4/138
[ 203.681455] Memory state around the buggy address:
[ 203.682421] ffff888144df1f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 203.683863] ffff888144df1f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 203.685310] >ffff888144df2000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 203.686701] ^
[ 203.687820] ffff888144df2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 203.689226] ffff888144df2100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 203.690620] ==================================================================
Resource dump menu may span over more than a single page, support it.
Otherwise, menu read may result in a memory access violation: reading
outside of the allocated page.
Note that page format of the first menu page contains menu headers while
the proceeding menu pages contain only records.
The KASAN logs are as follows:
BUG: KASAN: slab-out-of-bounds in strcmp+0x9b/0xb0
Read of size 1 at addr ffff88812b2e1fd0 by task systemd-udevd/496
CPU: 5 PID: 496 Comm: systemd-udevd Tainted: G B 5.16.0_for_upstream_debug_2022_01_10_23_12 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x7d
print_address_description.constprop.0+0x1f/0x140
? strcmp+0x9b/0xb0
? strcmp+0x9b/0xb0
kasan_report.cold+0x83/0xdf
? strcmp+0x9b/0xb0
strcmp+0x9b/0xb0
mlx5_rsc_dump_init+0x4ab/0x780 [mlx5_core]
? mlx5_rsc_dump_destroy+0x80/0x80 [mlx5_core]
? lockdep_hardirqs_on_prepare+0x286/0x400
? raw_spin_unlock_irqrestore+0x47/0x50
? aomic_notifier_chain_register+0x32/0x40
mlx5_load+0x104/0x2e0 [mlx5_core]
mlx5_init_one+0x41b/0x610 [mlx5_core]
....
The buggy address belongs to the object at ffff88812b2e0000
which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 4048 bytes to the right of
4096-byte region [ffff88812b2e0000, ffff88812b2e1000)
The buggy address belongs to the page:
page:000000009d69807a refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88812b2e6000 pfn:0x12b2e0
head:000000009d69807a order:3 compound_mapcount:0 compound_pincount:0
flags: 0x8000000000010200(slab|head|zone=2)
raw: 80000000000102000000000000000000dead000000000001ffff888100043040
raw: ffff88812b2e6000000000008004000000000001ffffffff0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address: ffff88812b2e1e80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88812b2e1f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88812b2e1f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^ ffff88812b2e2000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88812b2e2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fixes: 12206b17235a ("net/mlx5: Add support for resource dump") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
A reference to the framebuffer device struct fb_info is stored in the file
private data, but this reference could no longer be valid and must not be
accessed directly. Instead, the file_fb_info() accessor function must be
used since it does sanity checking to make sure that the fb_info is valid.
This can happen for example if the registered framebuffer device is for a
driver that just uses a framebuffer provided by the system firmware. In
that case, the fbdev core would unregister the framebuffer device when a
real video driver is probed and ask to remove conflicting framebuffers.
The bug has been present for a long time but commit 27599aacbaef ("fbdev:
Hot-unplug firmware fb devices on forced removal") unmasked it since the
fbdev core started unregistering the framebuffers' devices associated.
Fixes: 27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal") Reported-by: Maxime Ripard <maxime@cerno.tech> Reported-by: Junxiao Chang <junxiao.chang@intel.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220502135014.377945-1-javierm@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
On some x86 processors, CPUID leaf 0xA provides information
on Architectural Performance Monitoring features. It
advertises a PMU version which Qemu uses to determine the
availability of additional MSRs to manage the PMCs.
Upon receiving a KVM_GET_SUPPORTED_CPUID ioctl request for
the same, the kernel constructs return values based on the
x86_pmu_capability irrespective of the vendor.
This leaf and the additional MSRs are not supported on AMD
and Hygon processors. If AMD PerfMonV2 is detected, the PMU
version is set to 2 and guest startup breaks because of an
attempt to access a non-existent MSR. Return zeros to avoid
this.
Fixes: a6c06ed1a60a ("KVM: Expose the architectural performance monitoring CPUID leaf") Reported-by: Vasant Hegde <vasant.hegde@amd.com> Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Message-Id: <3fef83d9c2b2f7516e8ff50d60851f29a4bcb716.1651058600.git.sandipan.das@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
pwmchip_add() unconditionally assigns the base ID dynamically. Commit f9a8ee8c8bcd1 ("pwm: Always allocate PWM chip base ID dynamically")
dropped all base assignment from drivers under drivers/pwm/. It missed
this driver. Fix that.
DP/HDMI audio on AMD PRO VII stops working after S3:
[ 149.450391] amdgpu 0000:63:00.0: amdgpu: MODE1 reset
[ 149.450395] amdgpu 0000:63:00.0: amdgpu: GPU mode1 reset
[ 149.450494] amdgpu 0000:63:00.0: amdgpu: GPU psp mode1 reset
[ 149.983693] snd_hda_intel 0000:63:00.1: refused to change power state from D0 to D3hot
[ 150.003439] amdgpu 0000:63:00.0: refused to change power state from D0 to D3hot
...
[ 155.432975] snd_hda_intel 0000:63:00.1: CORB reset timeout#2, CORBRP = 65535
The offending commit is daf8de0874ab5b ("drm/amdgpu: always reset the asic in
suspend (v2)"). Commit 34452ac3038a7 ("drm/amdgpu: don't use BACO for
reset in S3 ") doesn't help, so the issue is something different.
Assuming that to make HDA resume to D0 fully realized, it needs to be
successfully put to D3 first. And this guesswork proves working, by
moving amdgpu_asic_reset() to noirq callback, so it's called after HDA
function is in D3.
Fixes: daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On Linux, empty symlinks are invalid, and attempting to create one with
the system call symlink(2) results in an -ENOENT error and this is
explicitly documented in the man page.
If we rename a symlink that was created in the current transaction and its
parent directory was logged before, we actually end up logging the symlink
without logging its content, which is stored in an inline extent. That
means that after a power failure we can end up with an empty symlink,
having no content and an i_size of 0 bytes.
It can be easily reproduced like this:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ mkdir /mnt/testdir
$ sync
# Create a file inside the directory and fsync the directory.
$ touch /mnt/testdir/foo
$ xfs_io -c "fsync" /mnt/testdir
# Create a symlink inside the directory and then rename the symlink.
$ ln -s /mnt/testdir/foo /mnt/testdir/bar
$ mv /mnt/testdir/bar /mnt/testdir/baz
# Now fsync again the directory, this persist the log tree.
$ xfs_io -c "fsync" /mnt/testdir
<power failure>
$ mount /dev/sdc /mnt
$ stat -c %s /mnt/testdir/baz
0
$ readlink /mnt/testdir/baz
$
Fix this by always logging symlinks in full mode (LOG_INODE_ALL), so that
their content is also logged.
A test case for fstests will follow.
CC: stable@vger.kernel.org # 4.9+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[BUG]
For a 4K sector sized btrfs with v1 cache enabled and only mounted on
systems with 4K page size, if it's mounted on subpage (64K page size)
systems, it can cause the following warning on v1 space cache:
BTRFS error (device dm-1): csum mismatch on free space cache
BTRFS warning (device dm-1): failed to load free space cache for block group 84082688, rebuilding it now
Although not a big deal, as kernel can rebuild it without problem, such
warning will bother end users, especially if they want to switch the
same btrfs seamlessly between different page sized systems.
[CAUSE]
V1 free space cache is still using fixed PAGE_SIZE for various bitmap,
like BITS_PER_BITMAP.
Such hard-coded PAGE_SIZE usage will cause various mismatch, from v1
cache size to checksum.
Thus kernel will always reject v1 cache with a different PAGE_SIZE with
csum mismatch.
[FIX]
Although we should fix v1 cache, it's already going to be marked
deprecated soon.
And we have v2 cache based on metadata (which is already fully subpage
compatible), and it has almost everything superior than v1 cache.
So just force subpage mount to use v2 cache on mount.
Reported-by: Matt Corallo <blnxfsl@bluematt.me> CC: stable@vger.kernel.org # 5.15+ Link: https://lore.kernel.org/linux-btrfs/61aa27d1-30fc-c1a9-f0f4-9df544395ec3@bluematt.me/ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The AlphaProject AP-SH4A-3A/AP-SH4AD-0A SH boards use IRQ0 for their SMSC
LAN911x Ethernet chip, so the networking on them must have been broken by
commit 965b2aa78fbc ("net/smsc911x: fix irq resource allocation failure")
which filtered out 0 as well as the negative error codes -- it was kinda
correct at the time, as platform_get_irq() could return 0 on of_irq_get()
failure and on the actual 0 in an IRQ resource. This issue was fixed by
me (back in 2016!), so we should be able to fix this driver to allow IRQ0
usage again...
When merging this to the stable kernels, make sure you also merge commit e330b9a6bb35 ("platform: don't return 0 from platform_get_irq[_byname]()
on error") -- that's my fix to platform_get_irq() for the DT platforms...
As discussed here with Ido Schimmel:
https://patchwork.kernel.org/project/netdevbpf/patch/20220224102908.5255-2-jianbol@nvidia.com/
the default conform-exceed action is "reclassify", for a reason we don't
really understand.
The point is that hardware can't offload that police action, so not
specifying "conform-exceed" was always wrong, even though the command
used to work in hardware (but not in software) until the kernel started
adding validation for it.
Fix the command used by the selftest by making the policer drop on
exceed, and pass the packet to the next action (goto) on conform.
Fixes: 8cd6b020b644 ("selftests: ocelot: add some example VCAP IS1, IS2 and ES0 tc offloads") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220503121428.842906-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In bnxt_poll_p5(), we first check cpr->has_more_work. If it is true,
we are in NAPI polling mode and we will call __bnxt_poll_cqs() to
continue polling. It is possible to exhanust the budget again when
__bnxt_poll_cqs() returns.
We then enter the main while loop to check for new entries in the NQ.
If we had previously exhausted the NAPI budget, we may call
__bnxt_poll_work() to process an RX entry with zero budget. This will
cause packets to be dropped unnecessarily, thinking that we are in the
netpoll path. Fix it by breaking out of the while loop if we need
to process an RX NQ entry with no budget left. We will then exit
NAPI and stay in polling mode.
Fixes: 389a877a3b20 ("bnxt_en: Process the NQ under NAPI continuous polling.") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On older chips, RFS is capable if we can reserve the number of vnics that
is equal to RX rings + 1. But since RX rings is still set to 0 in this
code path, we may mistakenly think that RFS is supported for 0 RX rings.
Later, when the default RX rings are reserved and we try to enable
RFS, it would fail and cause bnxt_open() to fail unnecessarily.
We fix this in 2 places. bnxt_rfs_capable() will always return false if
RX rings is not yet set. bnxt_init_dflt_ring_mode() will call
bnxt_set_dflt_rfs() which will always clear the RFS flags if RFS is not
supported.
Fixes: 20d7d1c5c9b1 ("bnxt_en: reliably allocate IRQ table on reset to avoid crash") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In emulated environments, the bridge ports enslaved to br1 get a carrier
before changing br1's PVID. This means that by the time the PVID is
changed, br1 is already operational and configured with an IPv6
link-local address.
When the test is run with netdevs registered by mlxsw, changing the PVID
is vetoed, as changing the VID associated with an existing L3 interface
is forbidden. This restriction is similar to the 8021q driver's
restriction of changing the VID of an existing interface.
Fix this by taking br1 down and bringing it back up when it is fully
configured.
With this fix, the test reliably passes on top of both the SW and HW
data paths (emulated or not).
Fixes: 239e754af854 ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20220502084507.364774-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AF_RXRPC doesn't currently enable IPv6 UDP Tx checksums on the transport
socket it opens and the checksums in the packets it generates end up 0.
It probably should also enable IPv6 UDP Rx checksums and IPv4 UDP
checksums. The latter only seem to be applied if the socket family is
AF_INET and don't seem to apply if it's AF_INET6. IPv4 packets from an
IPv6 socket seem to have checksums anyway.
What seems to have happened is that the inet_inv_convert_csum() call didn't
get converted to the appropriate udp_port_cfg parameters - and
udp_sock_create() disables checksums unless explicitly told not too.
Fix this by enabling the three udp_port_cfg checksum options.
Fixes: 1a9b86c9fd95 ("rxrpc: use udp tunnel APIs instead of open code in rxrpc_open_socket") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: Vadim Fedorenko <vfedorenko@novek.ru>
cc: David S. Miller <davem@davemloft.net>
cc: linux-afs@lists.infradead.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Whenever RCU protected list replaces an object,
the pointer to the new object needs to be updated
_before_ the call to kfree_rcu() or call_rcu()
Also ip6_mc_msfilter() needs to update the pointer
before releasing the mc_lock mutex.
Note that linux-5.13 was supporting kfree_rcu(NULL, rcu),
so this fix does not need the conditional test I was
forced to use in the equivalent patch for IPv4.
Fixes: 882ba1f73c06 ("mld: convert ipv6_mc_socklist->sflist to RCU") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If wq has only one page, we need to check wqe rolling over page by
compare end_idx and curr_idx, and then copy wqe to shadow wqe to
avoid out of bound access.
This work has been done in hinic_get_wqe, but missed for hinic_read_wqe.
This patch fixes it, and removes unnecessary MASKED_WQE_IDX().
We are doing a BUG_ON() if we fail to update an inode after setting (or
clearing) a xattr, but there's really no reason to not instead simply
abort the transaction and return the error to the caller. This should be
a rare error because we have previously reserved enough metadata space to
update the inode and the delayed inode should have already been setup, so
an -ENOSPC or -ENOMEM, which are the possible errors, are very unlikely to
happen.
So replace the BUG_ON()s with a transaction abort.
CC: stable@vger.kernel.org # 4.9+ Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current DP driver implementation has adding safe mode done at
dp_hpd_plug_handle() which is expected to be executed under event
thread context.
However there is possible circular locking happen (see blow stack trace)
after edp driver call dp_hpd_plug_handle() from dp_bridge_enable() which
is executed under drm_thread context.
After review all possibilities methods and as discussed on
https://patchwork.freedesktop.org/patch/483155/, supporting EDID
compliance tests in the driver is quite hacky. As seen with other
vendor drivers, supporting these will be much easier with IGT. Hence
removing all the related fail safe code for it so that no possibility
of circular lock will happen. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
======================================================
WARNING: possible circular locking dependency detected
5.15.35-lockdep #6 Tainted: G W
------------------------------------------------------
frecon/429 is trying to acquire lock: ffffff808dc3c4e8 (&dev->mode_config.mutex){+.+.}-{3:3}, at:
dp_panel_add_fail_safe_mode+0x4c/0xa0
but task is already holding lock: ffffff808dc441e0 (&kms->commit_lock[i]){+.+.}-{3:3}, at: lock_crtcs+0xb4/0x124
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
The program uses CLOCK_TAI as default clock since it was added to the
Linux repo. In commit:
| 040806343bb4 ("selftests/net: so_txtime multi-host support")
a help text stating the wrong default clock was added.
This patch fixes the help text.
Fixes: 040806343bb4 ("selftests/net: so_txtime multi-host support") Cc: Carlos Llamas <cmllamas@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20220502094638.1921702-3-mkl@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the parsing of the cmd line supplied start time on 32
bit systems. A "long" on 32 bit systems is only 32 bit wide and cannot
hold a timestamp in nano second resolution.
Fixes: 040806343bb4 ("selftests/net: so_txtime multi-host support") Cc: Carlos Llamas <cmllamas@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20220502094638.1921702-2-mkl@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Whenever RCU protected list replaces an object,
the pointer to the new object needs to be updated
_before_ the call to kfree_rcu() or call_rcu()
Because kfree_rcu(ptr, rcu) got support for NULL ptr
only recently in commit 12edff045bc6 ("rcu: Make kfree_rcu()
ignore NULL pointers"), I chose to use the conditional
to make sure stable backports won't miss this detail.
if (psl)
kfree_rcu(psl, rcu);
net/ipv6/mcast.c has similar issues, addressed in a separate patch.
[1]
BUG: KASAN: use-after-free in ip_mc_sf_allow+0x6bb/0x6d0 net/ipv4/igmp.c:2655
Read of size 4 at addr ffff88807d37b904 by task syz-executor.5/908
Second to last potentially related work creation:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
__kasan_record_aux_stack+0x7e/0x90 mm/kasan/generic.c:348
call_rcu+0x99/0x790 kernel/rcu/tree.c:3074
mpls_dev_notify+0x552/0x8a0 net/mpls/af_mpls.c:1656
notifier_call_chain+0xb5/0x200 kernel/notifier.c:84
call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1938
call_netdevice_notifiers_extack net/core/dev.c:1976 [inline]
call_netdevice_notifiers net/core/dev.c:1990 [inline]
unregister_netdevice_many+0x92e/0x1890 net/core/dev.c:10751
default_device_exit_batch+0x449/0x590 net/core/dev.c:11245
ops_exit_list+0x125/0x170 net/core/net_namespace.c:167
cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594
process_one_work+0x996/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e9/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298
The buggy address belongs to the object at ffff88807d37b900
which belongs to the cache kmalloc-64 of size 64
The buggy address is located 4 bytes inside of
64-byte region [ffff88807d37b900, ffff88807d37b940)
Memory state around the buggy address: ffff88807d37b800: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc ffff88807d37b880: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
>ffff88807d37b900: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
^ ffff88807d37b980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff88807d37ba00: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
Fixes: c85bb41e9318 ("igmp: fix ip_mc_sf_allow race [v5]") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Flavio Leitner <fbl@sysclose.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'tmp_node' need be put before returning from cpsw_probe_dt(),
so add missing of_node_put() in error path.
Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to declare attributes such as the ctime, mtime and
block size invalid when we're just returning a delegation, so it is
inappropriate to call nfs_post_op_update_inode_force_wcc().
Instead, just call nfs_refresh_inode() after faking up the change
attribute. We know that the GETATTR op occurs before the DELEGRETURN, so
we are safe when doing this.
Fixes: 0bc2c9b4dca9 ("NFSv4: Don't discard the attributes returned by asynchronous DELEGRETURN") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For some net events in irdma_net_event notifier, the netdev can be NULL
which will cause a crash in rdma_vlan_dev_real_dev. Fix this by moving
all processing to the NETEVENT_NEIGH_UPDATE case where the netdev is
guaranteed to not be NULL.
Fixes: 6702bc147448 ("RDMA/irdma: Fix netdev notifications for vlan's") Link: https://lore.kernel.org/r/20220425181703.1634-4-shiraz.saleem@intel.com Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>