Linus Torvalds [Sun, 28 Nov 2021 19:58:52 +0000 (11:58 -0800)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull vhost,virtio,vdpa bugfixes from Michael Tsirkin:
"Misc fixes all over the place.
Revert of virtio used length validation series: the approach taken
does not seem to work, breaking too many guests in the process. We'll
need to do length validation using some other approach"
[ This merge also ends up reverting commit f7a36b03a732 ("vsock/virtio:
suppress used length validation"), which came in through the
networking tree in the meantime, and was part of that whole used
length validation series - Linus ]
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa_sim: avoid putting an uninitialized iova_domain
vhost-vdpa: clean irqs before reseting vdpa device
virtio-blk: modify the value type of num in virtio_queue_rq()
vhost/vsock: cleanup removing `len` variable
vhost/vsock: fix incorrect used length reported to the guest
Revert "virtio_ring: validate used buffer length"
Revert "virtio-net: don't let virtio core to validate used length"
Revert "virtio-blk: don't let virtio core to validate used length"
Revert "virtio-scsi: don't let virtio core to validate used buffer length"
Linus Torvalds [Sun, 28 Nov 2021 17:15:34 +0000 (09:15 -0800)]
Merge tag 'sched-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single scheduler fix to ensure that there is no stale KASAN shadow
state left on the idle task's stack when a CPU is brought up after it
was brought down before"
* tag 'sched-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/scs: Reset task stack state in bringup_cpu()
Linus Torvalds [Sun, 28 Nov 2021 17:10:54 +0000 (09:10 -0800)]
Merge tag 'perf-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Thomas Gleixner:
"A single fix for perf to prevent it from sending SIGTRAP to another
task from a trace point event as it's not possible to deliver a
synchronous signal to a different task from there"
* tag 'perf-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Ignore sigtrap for tracepoints destined for other tasks
Linus Torvalds [Sun, 28 Nov 2021 17:04:41 +0000 (09:04 -0800)]
Merge tag 'locking-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two regression fixes for reader writer semaphores:
- Plug a race in the lock handoff which is caused by inconsistency of
the reader and writer path and can lead to corruption of the
underlying counter.
- down_read_trylock() is suboptimal when the lock is contended and
multiple readers trylock concurrently. That's due to the initial
value being read non-atomically which results in at least two
compare exchange loops. Making the initial readout atomic reduces
this significantly. Whith 40 readers by 11% in a benchmark which
enforces contention on mmap_sem"
* tag 'locking-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Optimize down_read_trylock() under highly contended case
locking/rwsem: Make handoff bit handling more consistent
Linus Torvalds [Sun, 28 Nov 2021 16:50:53 +0000 (08:50 -0800)]
Merge tag 'trace-v5.16-rc2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull another tracing fix from Steven Rostedt:
"Fix the fix of pid filtering
The setting of the pid filtering flag tested the "trace only this pid"
case twice, and ignored the "trace everything but this pid" case.
The 5.15 kernel does things a little differently due to the new sparse
pid mask introduced in 5.16, and as the bug was discovered running the
5.15 kernel, and the first fix was initially done for that kernel,
that fix handled both cases (only pid and all but pid), but the
forward port to 5.16 created this bug"
* tag 'trace-v5.16-rc2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Test the 'Do not trace this pid' case in create event
Linus Torvalds [Sat, 27 Nov 2021 22:49:35 +0000 (14:49 -0800)]
Merge tag '5.16-rc2-ksmbd-fixes' of git://git.samba.org/ksmbd
Pull ksmbd fixes from Steve French:
"Five ksmbd server fixes, four of them for stable:
- memleak fix
- fix for default data stream on filesystems that don't support xattr
- error logging fix
- session setup fix
- minor doc cleanup"
* tag '5.16-rc2-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix memleak in get_file_stream_info()
ksmbd: contain default data stream even if xattr is empty
ksmbd: downgrade addition info error msg to debug in smb2_get_info_sec()
docs: filesystem: cifs: ksmbd: Fix small layout issues
ksmbd: Fix an error handling path in 'smb2_sess_setup()'
Guenter Roeck [Sat, 27 Nov 2021 15:44:41 +0000 (07:44 -0800)]
fs: ntfs: Limit NTFS_RW to page sizes smaller than 64k
NTFS_RW code allocates page size dependent arrays on the stack. This
results in build failures if the page size is 64k or larger.
fs/ntfs/aops.c: In function 'ntfs_write_mst_block':
fs/ntfs/aops.c:1311:1: error:
the frame size of 2240 bytes is larger than 2048 bytes
Since commit f22969a66041 ("powerpc/64s: Default to 64K pages for 64 bit
book3s") this affects ppc:allmodconfig builds, but other architectures
supporting page sizes of 64k or larger are also affected.
Increasing the maximum frame size for affected architectures just to
silence this error does not really help. The frame size would have to
be set to a really large value for 256k pages. Also, a large frame size
could potentially result in stack overruns in this code and elsewhere
and is therefore not desirable. Make NTFS_RW dependent on page sizes
smaller than 64k instead.
NTFS_RW and VMXNET3 require a page size smaller than 64kB. Add generic
Kconfig option for use outside architecture code to avoid architecture
specific Kconfig options in that code.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: Anton Altaparmakov <anton@tuxera.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
tracing: Test the 'Do not trace this pid' case in create event
When creating a new event (via a module, kprobe, eprobe, etc), the
descriptors that are created must add flags for pid filtering if an
instance has pid filtering enabled, as the flags are used at the time the
event is executed to know if pid filtering should be done or not.
The "Only trace this pid" case was added, but a cut and paste error made
that case checked twice, instead of checking the "Trace all but this pid"
case.
Linus Torvalds [Sat, 27 Nov 2021 20:59:54 +0000 (12:59 -0800)]
Merge tag 'xfs-5.16-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Fixes for a resource leak and a build robot complaint about totally
dead code:
- Fix buffer resource leak that could lead to livelock on corrupt fs.
- Remove unused function xfs_inew_wait to shut up the build robots"
* tag 'xfs-5.16-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove xfs_inew_wait
xfs: Fix the free logic of state in xfs_attr_node_hasname
Linus Torvalds [Sat, 27 Nov 2021 20:50:03 +0000 (12:50 -0800)]
Merge tag 'iomap-5.16-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap fixes from Darrick Wong:
"A single iomap bug fix and a cleanup for 5.16-rc2.
The bug fix changes how iomap deals with reading from an inline data
region -- whereas the current code (incorrectly) lets the iomap read
iter try for more bytes after reading the inline region (which zeroes
the rest of the page!) and hopes the next iteration terminates, we
surveyed the inlinedata implementations and realized that all
inlinedata implementations also require that the inlinedata region end
at EOF, so we can simply terminate the read.
The second patch documents these assumptions in the code so that
they're not subtle implications anymore, and cleans up some of the
grosser parts of that function.
Summary:
- Fix an accounting problem where unaligned inline data reads can run
off the end of the read iomap iterator. iomap has historically
required that inline data mappings only exist at the end of a file,
though this wasn't documented anywhere.
- Document iomap_read_inline_data and change its return type to be
appropriate for the information that it's actually returning"
* tag 'iomap-5.16-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: iomap_read_inline_data cleanup
iomap: Fix inline extent handling in iomap_readpage
Linus Torvalds [Sat, 27 Nov 2021 20:03:57 +0000 (12:03 -0800)]
Merge tag 'trace-v5.16-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two fixes to event pid filtering:
- Make sure newly created events reflect the current state of pid
filtering
- Take pid filtering into account when recording trigger events.
(Also clean up the if statement to be cleaner)"
* tag 'trace-v5.16-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix pid filtering when triggers are attached
tracing: Check pid filtering when creating events
Linus Torvalds [Sat, 27 Nov 2021 19:28:37 +0000 (11:28 -0800)]
Merge tag 'io_uring-5.16-2021-11-27' of git://git.kernel.dk/linux-block
Pull more io_uring fixes from Jens Axboe:
"The locking fixup that was applied earlier this rc has both a deadlock
and IRQ safety issue, let's get that ironed out before -rc3. This
contains:
- Link traversal locking fix (Pavel)
- Cancelation fix (Pavel)
- Relocate cond_resched() for huge buffer chain freeing, avoiding a
softlockup warning (Ye)
- Fix timespec validation (Ye)"
* tag 'io_uring-5.16-2021-11-27' of git://git.kernel.dk/linux-block:
io_uring: Fix undefined-behaviour in io_issue_sqe
io_uring: fix soft lockup when call __io_remove_buffers
io_uring: fix link traversal locking
io_uring: fail cancellation for EXITING tasks
Linus Torvalds [Sat, 27 Nov 2021 19:19:42 +0000 (11:19 -0800)]
Merge tag 'block-5.16-2021-11-27' of git://git.kernel.dk/linux-block
Pull more block fixes from Jens Axboe:
"Turns out that the flushing out of pending fixes before the
Thanksgiving break didn't quite work out in terms of timing, so here's
a followup set of fixes:
- rq_qos_done() should be called regardless of whether or not we're
the final put of the request, it's not related to the freeing of
the state. This fixes an IO stall with wbt that a few users have
reported, a regression in this release.
- Only define zram_wb_devops if it's used, fixing a compilation
warning for some compilers"
* tag 'block-5.16-2021-11-27' of git://git.kernel.dk/linux-block:
zram: only make zram_wb_devops for CONFIG_ZRAM_WRITEBACK
block: call rq_qos_done() before ref check in batch completions
Linus Torvalds [Sat, 27 Nov 2021 19:15:17 +0000 (11:15 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Twelve fixes, eleven in drivers (target, qla2xx, scsi_debug, mpt3sas,
ufs). The core fix is a minor correction to the previous state update
fix for the iscsi daemons"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_debug: Zero clear zones at reset write pointer
scsi: core: sysfs: Fix setting device state to SDEV_RUNNING
scsi: scsi_debug: Sanity check block descriptor length in resp_mode_select()
scsi: target: configfs: Delete unnecessary checks for NULL
scsi: target: core: Use RCU helpers for INQUIRY t10_alua_tg_pt_gp
scsi: mpt3sas: Fix incorrect system timestamp
scsi: mpt3sas: Fix system going into read-only mode
scsi: mpt3sas: Fix kernel panic during drive powercycle test
scsi: ufs: ufs-mediatek: Add put_device() after of_find_device_by_node()
scsi: scsi_debug: Fix type in min_t to avoid stack OOB
scsi: qla2xxx: edif: Fix off by one bug in qla_edif_app_getfcinfo()
scsi: ufs: ufshpb: Fix warning in ufshpb_set_hpb_read_to_upiu()
Linus Torvalds [Sat, 27 Nov 2021 18:33:55 +0000 (10:33 -0800)]
Merge tag 'nfs-for-5.16-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- NFSv42: Fix pagecache invalidation after COPY/CLONE
Bugfixes:
- NFSv42: Don't fail clone() just because the server failed to return
post-op attributes
- SUNRPC: use different lockdep keys for INET6 and LOCAL
- NFSv4.1: handle NFS4ERR_NOSPC from CREATE_SESSION
- SUNRPC: fix header include guard in trace header"
* tag 'nfs-for-5.16-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: use different lock keys for INET6 and LOCAL
sunrpc: fix header include guard in trace header
NFSv4.1: handle NFS4ERR_NOSPC by CREATE_SESSION
NFSv42: Fix pagecache invalidation after COPY/CLONE
NFS: Add a tracepoint to show the results of nfs_set_cache_invalid()
NFSv42: Don't fail clone() unless the OP_CLONE operation failed
Linus Torvalds [Sat, 27 Nov 2021 18:06:15 +0000 (10:06 -0800)]
Merge tag 'powerpc-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fix KVM using a Power9 instruction on earlier CPUs, which could lead
to the host SLB being incorrectly invalidated and a subsequent host
crash.
Fix kernel hardlockup on vmap stack overflow on 32-bit.
Thanks to Christophe Leroy, Nicholas Piggin, and Fabiano Rosas"
* tag 'powerpc-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32: Fix hardlockup on vmap stack overflow
KVM: PPC: Book3S HV: Prevent POWER7/8 TLB flush flushing SLB
Linus Torvalds [Sat, 27 Nov 2021 17:50:31 +0000 (09:50 -0800)]
Merge tag 'mips-fixes_5.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- build fix for ZSTD enabled configs
- fix for preempt warning
- fix for loongson FTLB detection
- fix for page table level selection
* tag 'mips-fixes_5.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: use 3-level pgtable for 64KB page size on MIPS_VA_BITS_48
MIPS: loongson64: fix FTLB configuration
MIPS: Fix using smp_processor_id() in preemptible in show_cpuinfo()
MIPS: boot/compressed/: add __ashldi3 to target for ZSTD compression
Ye Bin [Thu, 18 Nov 2021 01:59:07 +0000 (09:59 +0800)]
io_uring: Fix undefined-behaviour in io_issue_sqe
We got issue as follows:
================================================================================
UBSAN: Undefined behaviour in ./include/linux/ktime.h:42:14
signed integer overflow:
-4966321760114568020 * 1000000000 cannot be represented in type 'long long int'
CPU: 1 PID: 2186 Comm: syz-executor.2 Not tainted 4.19.90+ #12
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x3f0 arch/arm64/kernel/time.c:78
show_stack+0x28/0x38 arch/arm64/kernel/traps.c:158
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x170/0x1dc lib/dump_stack.c:118
ubsan_epilogue+0x18/0xb4 lib/ubsan.c:161
handle_overflow+0x188/0x1dc lib/ubsan.c:192
__ubsan_handle_mul_overflow+0x34/0x44 lib/ubsan.c:213
ktime_set include/linux/ktime.h:42 [inline]
timespec64_to_ktime include/linux/ktime.h:78 [inline]
io_timeout fs/io_uring.c:5153 [inline]
io_issue_sqe+0x42c8/0x4550 fs/io_uring.c:5599
__io_queue_sqe+0x1b0/0xbc0 fs/io_uring.c:5988
io_queue_sqe+0x1ac/0x248 fs/io_uring.c:6067
io_submit_sqe fs/io_uring.c:6137 [inline]
io_submit_sqes+0xed8/0x1c88 fs/io_uring.c:6331
__do_sys_io_uring_enter fs/io_uring.c:8170 [inline]
__se_sys_io_uring_enter fs/io_uring.c:8129 [inline]
__arm64_sys_io_uring_enter+0x490/0x980 fs/io_uring.c:8129
invoke_syscall arch/arm64/kernel/syscall.c:53 [inline]
el0_svc_common+0x374/0x570 arch/arm64/kernel/syscall.c:121
el0_svc_handler+0x190/0x260 arch/arm64/kernel/syscall.c:190
el0_svc+0x10/0x218 arch/arm64/kernel/entry.S:1017
================================================================================
As ktime_set only judge 'secs' if big than KTIME_SEC_MAX, but if we pass
negative value maybe lead to overflow.
To address this issue, we must check if 'sec' is negative.
The reason above issue is 'buf->list' has 2,100,000 nodes, occupied cpu lead
to soft lockup.
To solve this issue, we need add schedule point when do while loop in
'__io_remove_buffers'.
After add schedule point we do regression, get follow data.
[ 240.141864] __io_remove_buffers: [1]start ctx=0xffff888170603000 bgid=65533 buf=0xffff8881116fcb00
[ 268.408260] __io_remove_buffers: [1]start ctx=0xffff8881b92d2000 bgid=65533 buf=0xffff888130c83180
[ 275.899234] __io_remove_buffers: [2099199]start ctx=0xffff888170603000 bgid=65533 buf=0xffff8881116fcb00
[ 296.741404] __io_remove_buffers: [1]start ctx=0xffff8881b659c000 bgid=65533 buf=0xffff8881010fe380
[ 305.090059] __io_remove_buffers: [2099199]start ctx=0xffff8881b92d2000 bgid=65533 buf=0xffff888130c83180
[ 325.415746] __io_remove_buffers: [1]start ctx=0xffff8881b92d1000 bgid=65533 buf=0xffff8881a17d8f00
[ 333.160318] __io_remove_buffers: [2099199]start ctx=0xffff8881b659c000 bgid=65533 buf=0xffff8881010fe380
...
tracing: Fix pid filtering when triggers are attached
If a event is filtered by pid and a trigger that requires processing of
the event to happen is a attached to the event, the discard portion does
not take the pid filtering into account, and the event will then be
recorded when it should not have been.
Alex Williamson [Fri, 26 Nov 2021 13:55:56 +0000 (21:55 +0800)]
iommu/vt-d: Fix unmap_pages support
When supporting only the .map and .unmap callbacks of iommu_ops,
the IOMMU driver can make assumptions about the size and alignment
used for mappings based on the driver provided pgsize_bitmap. VT-d
previously used essentially PAGE_MASK for this bitmap as any power
of two mapping was acceptably filled by native page sizes.
However, with the .map_pages and .unmap_pages interface we're now
getting page-size and count arguments. If we simply combine these
as (page-size * count) and make use of the previous map/unmap
functions internally, any size and alignment assumptions are very
different.
As an example, a given vfio device assignment VM will often create
a 4MB mapping at IOVA pfn [0x3fe00 - 0x401ff]. On a system that
does not support IOMMU super pages, the unmap_pages interface will
ask to unmap 1024 4KB pages at the base IOVA. dma_pte_clear_level()
will recurse down to level 2 of the page table where the first half
of the pfn range exactly matches the entire pte level. We clear the
pte, increment the pfn by the level size, but (oops) the next pte is
on a new page, so we exit the loop an pop back up a level. When we
then update the pfn based on that higher level, we seem to assume
that the previous pfn value was at the start of the level. In this
case the level size is 256K pfns, which we add to the base pfn and
get a results of 0x7fe00, which is clearly greater than 0x401ff,
so we're done. Meanwhile we never cleared the ptes for the remainder
of the range. When the VM remaps this range, we're overwriting valid
ptes and the VT-d driver complains loudly, as reported by the user
report linked below.
The fix for this seems relatively simple, if each iteration of the
loop in dma_pte_clear_level() is assumed to clear to the end of the
level pte page, then our next pfn should be calculated from level_pfn
rather than our working pfn.
iommu/vt-d: Fix an unbalanced rcu_read_lock/rcu_read_unlock()
If we return -EOPNOTSUPP, the rcu lock remains lock. This is spurious.
Go through the end of the function instead. This way, the missing
'rcu_read_unlock()' is called.
Alex Bee [Wed, 24 Nov 2021 02:13:25 +0000 (03:13 +0100)]
iommu/rockchip: Fix PAGE_DESC_HI_MASKs for RK3568
With the submission of iommu driver for RK3568 a subtle bug was
introduced: PAGE_DESC_HI_MASK1 and PAGE_DESC_HI_MASK2 have to be
the other way arround - that leads to random errors, especially when
addresses beyond 32 bit are used.
Fix it.
Fixes: c55356c534aa ("iommu: rockchip: Add support for iommu v2") Signed-off-by: Alex Bee <knaerzche@gmail.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Dan Johansen <strit@manjaro.org> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Link: https://lore.kernel.org/r/20211124021325.858139-1-knaerzche@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
The messages printed on the initialization of the AMD IOMMUv2 driver
have caused some confusion in the past. Clarify the messages to lower
the confusion in the future.
- netfilter: ctnetlink: fix error codes and flags used for kernel
side filtering of dumps
- netfilter: flowtable: fix IPv6 tunnel addr match
- ncsi: align payload to 32-bit to fix dropped packets
- iavf: fix deadlock and loss of config during VF interface reset
- ice: avoid bpf_prog refcount underflow
- ocelot: fix broken PTP over IP and PTP API violations
Misc:
- marvell: mvpp2: increase MTU limit when XDP enabled"
* tag 'net-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
net: dsa: microchip: implement multi-bridge support
net: mscc: ocelot: correctly report the timestamping RX filters in ethtool
net: mscc: ocelot: set up traps for PTP packets
net: ptp: add a definition for the UDP port for IEEE 1588 general messages
net: mscc: ocelot: create a function that replaces an existing VCAP filter
net: mscc: ocelot: don't downgrade timestamping RX filters in SIOCSHWTSTAMP
net: hns3: fix incorrect components info of ethtool --reset command
net: hns3: fix one incorrect value of page pool info when queried by debugfs
net: hns3: add check NULL address for page pool
net: hns3: fix VF RSS failed problem after PF enable multi-TCs
net: qed: fix the array may be out of bound
net/smc: Don't call clcsock shutdown twice when smc shutdown
net: vlan: fix underflow for the real_dev refcnt
ptp: fix filter names in the documentation
ethtool: ioctl: fix potential NULL deref in ethtool_set_coalesce()
nfc: virtual_ncidev: change default device permissions
net/sched: sch_ets: don't peek at classes beyond 'nbands'
net: stmmac: Disable Tx queues when reconfiguring the interface
selftests: tls: test for correct proto_ops
tls: fix replacing proto_ops
...
Oleksij Rempel [Fri, 26 Nov 2021 12:39:26 +0000 (13:39 +0100)]
net: dsa: microchip: implement multi-bridge support
Current driver version is able to handle only one bridge at time.
Configuring two bridges on two different ports would end up shorting this
bridges by HW. To reproduce it:
ip l a name br0 type bridge
ip l a name br1 type bridge
ip l s dev br0 up
ip l s dev br1 up
ip l s lan1 master br0
ip l s dev lan1 up
ip l s lan2 master br1
ip l s dev lan2 up
Ping on lan1 and get response on lan2, which should not happen.
This happened, because current driver version is storing one global "Port VLAN
Membership" and applying it to all ports which are members of any
bridge.
To solve this issue, we need to handle each port separately.
This patch is dropping the global port member storage and calculating
membership dynamically depending on STP state and bridge participation.
Note: STP support was broken before this patch and should be fixed
separately.
Fixes: c2e866911e25 ("net: dsa: microchip: break KSZ9477 DSA driver into two files") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20211126123926.2981028-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 26 Nov 2021 20:19:13 +0000 (12:19 -0800)]
Merge tag 'acpi-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a NULL pointer dereference in the CPPC library code and a
locking issue related to printing the names of ACPI device nodes in
the device properties framework.
Specifics:
- Fix NULL pointer dereference in the CPPC library code occuring on
hybrid systems without CPPC support (Rafael Wysocki).
- Avoid attempts to acquire a semaphore with interrupts off when
printing the names of ACPI device nodes and clean up code on top of
that fix (Sakari Ailus)"
* tag 'acpi-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Add NULL pointer check to cppc_get_perf()
ACPI: Make acpi_node_get_parent() local
ACPI: Get acpi_device's parent from the parent field
Linus Torvalds [Fri, 26 Nov 2021 20:14:50 +0000 (12:14 -0800)]
Merge tag 'pm-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These address three issues in the intel_pstate driver and fix two
problems related to hibernation.
Specifics:
- Make intel_pstate work correctly on Ice Lake server systems with
out-of-band performance control enabled (Adamos Ttofari).
- Fix EPP handling in intel_pstate during CPU offline and online in
the active mode (Rafael Wysocki).
- Make intel_pstate support ITMT on asymmetric systems with
overclocking enabled (Srinivas Pandruvada).
- Fix hibernation image saving when using the user space interface
based on the snapshot special device file (Evan Green).
- Make the hibernation code release the snapshot block device using
the same mode that was used when acquiring it (Thomas Zeitlhofer)"
* tag 'pm-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: hibernate: Fix snapshot partial write lengths
PM: hibernate: use correct mode for swsusp_close()
cpufreq: intel_pstate: ITMT support for overclocked system
cpufreq: intel_pstate: Fix active mode offline/online EPP handling
cpufreq: intel_pstate: Add Ice Lake server to out-of-band IDs
Linus Torvalds [Fri, 26 Nov 2021 20:01:31 +0000 (12:01 -0800)]
Merge tag 'fuse-fixes-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fix from Miklos Szeredi:
"Fix a regression caused by a bugfix in the previous release. The
symptom is a VM_BUG_ON triggered from splice to the fuse device.
Unfortunately the original bugfix was already backported to a number
of stable releases, so this fix-fix will need to be backported as
well"
* tag 'fuse-fixes-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: release pipe buf after last use
====================
Fix broken PTP over IP on Ocelot switches
Changes in v2: added patch 5, added Richard's ack for the whole series
sans patch 5 which is new.
Po Liu reported recently that timestamping PTP over IPv4 is broken using
the felix driver on NXP LS1028A. This has been known for a while, of
course, since it has always been broken. The reason is because IP PTP
packets are currently treated as unknown IP multicast, which is not
flooded to the CPU port in the ocelot driver design, so packets don't
reach the ptp4l program.
The series solves the problem by installing packet traps per port when
the timestamping ioctl is called, depending on the RX filter selected
(L2, L4 or both).
====================
Vladimir Oltean [Fri, 26 Nov 2021 17:28:45 +0000 (19:28 +0200)]
net: mscc: ocelot: correctly report the timestamping RX filters in ethtool
The driver doesn't support RX timestamping for non-PTP packets, but it
declares that it does. Restrict the reported RX filters to PTP v2 over
L2 and over L4.
Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Fri, 26 Nov 2021 17:28:44 +0000 (19:28 +0200)]
net: mscc: ocelot: set up traps for PTP packets
IEEE 1588 support was declared too soon for the Ocelot switch. Out of
reset, this switch does not apply any special treatment for PTP packets,
i.e. when an event message is received, the natural tendency is to
forward it by MAC DA/VLAN ID. This poses a problem when the ingress port
is under a bridge, since user space application stacks (written
primarily for endpoint ports, not switches) like ptp4l expect that PTP
messages are always received on AF_PACKET / AF_INET sockets (depending
on the PTP transport being used), and never being autonomously
forwarded. Any forwarding, if necessary (for example in Transparent
Clock mode) is handled in software by ptp4l. Having the hardware forward
these packets too will cause duplicates which will confuse endpoints
connected to these switches.
So PTP over L2 barely works, in the sense that PTP packets reach the CPU
port, but they reach it via flooding, and therefore reach lots of other
unwanted destinations too. But PTP over IPv4/IPv6 does not work at all.
This is because the Ocelot switch have a separate destination port mask
for unknown IP multicast (which PTP over IP is) flooding compared to
unknown non-IP multicast (which PTP over L2 is) flooding. Specifically,
the driver allows the CPU port to be in the PGID_MC port group, but not
in PGID_MCIPV4 and PGID_MCIPV6. There are several presentations from
Allan Nielsen which explain that the embedded MIPS CPU on Ocelot
switches is not very powerful at all, so every penny they could save by
not allowing flooding to the CPU port module matters. Unknown IP
multicast did not make it.
The de facto consensus is that when a switch is PTP-aware and an
application stack for PTP is running, switches should have some sort of
trapping mechanism for PTP packets, to extract them from the hardware
data path. This avoids both problems:
(a) PTP packets are no longer flooded to unwanted destinations
(b) PTP over IP packets are no longer denied from reaching the CPU since
they arrive there via a trap and not via flooding
It is not the first time when this change is attempted. Last time, the
feedback from Allan Nielsen and Andrew Lunn was that the traps should
not be installed by default, and that PTP-unaware switching may be
desired for some use cases:
https://patchwork.ozlabs.org/project/netdev/patch/20190813025214.18601-5-yangbo.lu@nxp.com/
To address that feedback, the present patch adds the necessary packet
traps according to the RX filter configuration transmitted by user space
through the SIOCSHWTSTAMP ioctl. Trapping is done via VCAP IS2, where we
keep 5 filters, which are amended each time RX timestamping is enabled
or disabled on a port:
- 1 for PTP over L2
- 2 for PTP over IPv4 (UDP ports 319 and 320)
- 2 for PTP over IPv6 (UDP ports 319 and 320)
The cookie by which these filters (invisible to tc) are identified is
strategically chosen such that it does not collide with the filters used
for the ocelot-8021q tagging protocol by the Felix driver, or with the
MRP traps set up by the Ocelot library.
Other alternatives were considered, like patching user space to do
something, but there are so many ways in which PTP packets could be made
to reach the CPU, generically speaking, that "do what?" is a very valid
question. The ptp4l program from the linuxptp stack already attempts to
do something: it calls setsockopt(IP_ADD_MEMBERSHIP) (and
PACKET_ADD_MEMBERSHIP, respectively) which translates in both cases into
a dev_mc_add() on the interface, in the kernel:
https://github.com/richardcochran/linuxptp/blob/v3.1.1/udp.c#L73
https://github.com/richardcochran/linuxptp/blob/v3.1.1/raw.c
Reality shows that this is not sufficient in case the interface belongs
to a switchdev driver, as dev_mc_add() does not show the intention to
trap a packet to the CPU, but rather the intention to not drop it (it is
strictly for RX filtering, same as promiscuous does not mean to send all
traffic to the CPU, but to not drop traffic with unknown MAC DA). This
topic is a can of worms in itself, and it would be great if user space
could just stay out of it.
On the other hand, setting up PTP traps privately within the driver is
not new by any stretch of the imagination:
https://elixir.bootlin.com/linux/v5.16-rc2/source/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c#L833
https://elixir.bootlin.com/linux/v5.16-rc2/source/drivers/net/dsa/hirschmann/hellcreek.c#L1050
https://elixir.bootlin.com/linux/v5.16-rc2/source/include/linux/dsa/sja1105.h#L21
So this is the approach taken here as well. The difference here being
that we prepare and destroy the traps per port, dynamically at runtime,
as opposed to driver init time, because apparently, PTP-unaware
forwarding is a use case.
Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Reported-by: Po Liu <po.liu@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Fri, 26 Nov 2021 17:28:43 +0000 (19:28 +0200)]
net: ptp: add a definition for the UDP port for IEEE 1588 general messages
As opposed to event messages (Sync, PdelayReq etc) which require
timestamping, general messages (Announce, FollowUp etc) do not.
In PTP they are part of different streams of data.
IEEE 1588-2008 Annex D.2 "UDP port numbers" states that the UDP
destination port assigned by IANA is 319 for event messages, and 320 for
general messages. Yet the kernel seems to be missing the definition for
general messages. This patch adds it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Fri, 26 Nov 2021 17:28:42 +0000 (19:28 +0200)]
net: mscc: ocelot: create a function that replaces an existing VCAP filter
VCAP (Versatile Content Aware Processor) is the TCAM-based engine behind
tc flower offload on ocelot, among other things. The ingress port mask
on which VCAP rules match is present as a bit field in the actual key of
the rule. This means that it is possible for a rule to be shared among
multiple source ports. When the rule is added one by one on each desired
port, that the ingress port mask of the key must be edited and rewritten
to hardware.
But the API in ocelot_vcap.c does not allow for this. For one thing,
ocelot_vcap_filter_add() and ocelot_vcap_filter_del() are not symmetric,
because ocelot_vcap_filter_add() works with a preallocated and
prepopulated filter and programs it to hardware, and
ocelot_vcap_filter_del() does both the job of removing the specified
filter from hardware, as well as kfreeing it. That is to say, the only
option of editing a filter in place, which is to delete it, modify the
structure and add it back, does not work because it results in
use-after-free.
This patch introduces ocelot_vcap_filter_replace, which trivially
reprograms a VCAP entry to hardware, at the exact same index at which it
existed before, without modifying any list or allocating any memory.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Fri, 26 Nov 2021 17:28:41 +0000 (19:28 +0200)]
net: mscc: ocelot: don't downgrade timestamping RX filters in SIOCSHWTSTAMP
The ocelot driver, when asked to timestamp all receiving packets, 1588
v1 or NTP, says "nah, here's 1588 v2 for you".
According to this discussion:
https://patchwork.kernel.org/project/netdevbpf/patch/20211104133204.19757-8-martin.kaistra@linutronix.de/#24577647
drivers that downgrade from a wider request to a narrower response (or
even a response where the intersection with the request is empty) are
buggy, and should return -ERANGE instead. This patch fixes that.
Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Suggested-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jie Wang [Fri, 26 Nov 2021 12:03:18 +0000 (20:03 +0800)]
net: hns3: fix incorrect components info of ethtool --reset command
Currently, HNS3 driver doesn't clear the reset flags of components after
successfully executing reset, it causes userspace info of
"Components reset" and "Components not reset" is incorrect.
So fix this problem by clear corresponding reset flag after reset process.
Fixes: ddccc5e368a3 ("net: hns3: add support for triggering reset by ethtool") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hao Chen [Fri, 26 Nov 2021 12:03:17 +0000 (20:03 +0800)]
net: hns3: fix one incorrect value of page pool info when queried by debugfs
Currently, when user queries page pool info by debugfs command
"cat page_pool_info", the cnt of allocated page for page pool may be
incorrect because of memory inconsistency problem caused by compiler
optimization.
So this patch uses READ_ONCE() to read value of pages_state_hold_cnt to
fix this problem.
Fixes: 850bfb912a6d ("net: hns3: debugfs add support dumping page pool info") Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guangbin Huang [Fri, 26 Nov 2021 12:03:15 +0000 (20:03 +0800)]
net: hns3: fix VF RSS failed problem after PF enable multi-TCs
When PF is set to multi-TCs and configured mapping relationship between
priorities and TCs, the hardware will active these settings for this PF
and its VFs.
In this case when VF just uses one TC and its rx packets contain priority,
and if the priority is not mapped to TC0, as other TCs of VF is not valid,
hardware always put this kind of packets to the queue 0. It cause this kind
of packets of VF can not be used RSS function.
To fix this problem, set tc mode of all unused TCs of VF to the setting of
TC0, then rx packet with priority which map to unused TC will be direct to
TC0.
When pid filtering is activated in an instance, all of the events trace
files for that instance has the PID_FILTER flag set. This determines
whether or not pid filtering needs to be done on the event, otherwise the
event is executed as normal.
If pid filtering is enabled when an event is created (via a dynamic event
or modules), its flag is not updated to reflect the current state, and the
events are not filtered properly.
Tony Lu [Fri, 26 Nov 2021 02:41:35 +0000 (10:41 +0800)]
net/smc: Don't call clcsock shutdown twice when smc shutdown
When applications call shutdown() with SHUT_RDWR in userspace,
smc_close_active() calls kernel_sock_shutdown(), and it is called
twice in smc_shutdown().
This fixes this by checking sk_state before do clcsock shutdown, and
avoids missing the application's call of smc_shutdown().
Ziyang Xuan [Fri, 26 Nov 2021 01:59:42 +0000 (09:59 +0800)]
net: vlan: fix underflow for the real_dev refcnt
Inject error before dev_hold(real_dev) in register_vlan_dev(),
and execute the following testcase:
ip link add dev dummy1 type dummy
ip link add name dummy1.100 link dummy1 type vlan id 100
ip link del dev dummy1
When the dummy netdevice is removed, we will get a WARNING as following:
=======================================================================
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 2 PID: 0 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0
and an endless loop of:
=======================================================================
unregister_netdevice: waiting for dummy1 to become free. Usage count = -1073741824
That is because dev_put(real_dev) in vlan_dev_free() be called without
dev_hold(real_dev) in register_vlan_dev(). It makes the refcnt of real_dev
underflow.
Move the dev_hold(real_dev) to vlan_dev_init() which is the call-back of
ndo_init(). That makes dev_hold() and dev_put() for vlan's real_dev
symmetrical.
Fixes: 563bcbae3ba2 ("net: vlan: fix a UAF in vlan_dev_real_dev()") Reported-by: Petr Machata <petrm@nvidia.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Link: https://lore.kernel.org/r/20211126015942.2918542-1-william.xuanziyang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Julian Wiedmann [Fri, 26 Nov 2021 17:55:43 +0000 (18:55 +0100)]
ethtool: ioctl: fix potential NULL deref in ethtool_set_coalesce()
ethtool_set_coalesce() now uses both the .get_coalesce() and
.set_coalesce() callbacks. But the check for their availability is
buggy, so changing the coalesce settings on a device where the driver
provides only _one_ of the callbacks results in a NULL pointer
dereference instead of an -EOPNOTSUPP.
Fix the condition so that the availability of both callbacks is
ensured. This also matches the netlink code.
Note that reproducing this requires some effort - it only affects the
legacy ioctl path, and needs a specific combination of driver options:
- have .get_coalesce() and .coalesce_supported but no
.set_coalesce(), or
- have .set_coalesce() but no .get_coalesce(). Here eg. ethtool doesn't
cause the crash as it first attempts to call ethtool_get_coalesce()
and bails out on error.
Fixes: f3ccfda19319 ("ethtool: extend coalesce setting uAPI with CQE mode") Cc: Yufeng Mo <moyufeng@huawei.com> Cc: Huazhong Tan <tanhuazhong@huawei.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Link: https://lore.kernel.org/r/20211126175543.28000-1-jwi@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Davide Caratti [Wed, 24 Nov 2021 16:14:40 +0000 (17:14 +0100)]
net/sched: sch_ets: don't peek at classes beyond 'nbands'
when the number of DRR classes decreases, the round-robin active list can
contain elements that have already been freed in ets_qdisc_change(). As a
consequence, it's possible to see a NULL dereference crash, caused by the
attempt to call cl->qdisc->ops->peek(cl->qdisc) when cl->qdisc is NULL:
v3: fix race between ets_qdisc_change() and ets_qdisc_dequeue() delisting
DRR classes beyond 'nbands' in ets_qdisc_change() with the qdisc lock
acquired, thanks to Cong Wang.
v2: when a NULL qdisc is found in the DRR active list, try to dequeue skb
from the next list item.
Yannick Vignon [Wed, 24 Nov 2021 15:47:31 +0000 (16:47 +0100)]
net: stmmac: Disable Tx queues when reconfiguring the interface
The Tx queues were not disabled in situations where the driver needed to
stop the interface to apply a new configuration. This could result in a
kernel panic when doing any of the 3 following actions:
* reconfiguring the number of queues (ethtool -L)
* reconfiguring the size of the ring buffers (ethtool -G)
* installing/removing an XDP program (ip l set dev ethX xdp)
Prevent the panic by making sure netif_tx_disable is called when stopping
an interface.
Without this patch, the following kernel panic can be observed when doing
any of the actions above:
Unable to handle kernel paging request at virtual address ffff80001238d040
[....]
Call trace:
dwmac4_set_addr+0x8/0x10
dev_hard_start_xmit+0xe4/0x1ac
sch_direct_xmit+0xe8/0x39c
__dev_queue_xmit+0x3ec/0xaf0
dev_queue_xmit+0x14/0x20
[...]
[ end trace 0000000000000002 ]---
Fixes: 5fabb01207a2d ("net: stmmac: Add initial XDP support") Fixes: aa042f60e4961 ("net: stmmac: Add support to Ethtool get/set ring parameters") Fixes: 0366f7e06a6be ("net: stmmac: add ethtool support for get/set channels") Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Link: https://lore.kernel.org/r/20211124154731.1676949-1-yannick.vignon@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 26 Nov 2021 18:27:43 +0000 (10:27 -0800)]
Merge tag 'staging-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are some small staging driver fixes and one driver removal for
5.16-rc3.
The fixes resolve a number of small issues found in 5.16-rc1, nothing
huge at all. The driver removal was due to a platform being removed in
5.16-rc1, but this driver was forgotten about. It wasn't being built
anymore so it's safe to delete.
All have been in linux-next for a while with no reported problems"
* tag 'staging-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect()
staging: greybus: Add missing rwsem around snd_ctl_remove() calls
staging: Remove Netlogic XLP network driver
staging: r8188eu: fix a memory leak in rtw_wx_read32()
staging: r8188eu: use GFP_ATOMIC under spinlock
staging: r8188eu: Use kzalloc() with GFP_ATOMIC in atomic context
staging/fbtft: Fix backlight
staging: r8188eu: Fix breakage introduced when 5G code was removed
Linus Torvalds [Fri, 26 Nov 2021 17:59:55 +0000 (09:59 -0800)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C has an interrupt storm fix for the i801, better timeout handling
for the new virtio driver, and some documentation fixes this time"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
docs: i2c: smbus-protocol: mention the repeated start condition
i2c: virtio: disable timeout handling
i2c: i801: Fix interrupt storm from SMB_ALERT signal
i2c: i801: Restore INTREN on unload
dt-bindings: i2c: imx-lpi2c: Fix i.MX 8QM compatible matching
Linus Torvalds [Fri, 26 Nov 2021 17:54:13 +0000 (09:54 -0800)]
Merge tag 'for-linus-5.16c-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- Kconfig fix to make it possible to control building of the privcmd
driver
- three fixes for issues identified by the kernel test robot
- a five-patch series to simplify timeout handling for Xen PV driver
initialization
- two patches to fix error paths in xenstore/xenbus driver
initialization
* tag 'for-linus-5.16c-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: make HYPERVISOR_set_debugreg() always_inline
xen: make HYPERVISOR_get_debugreg() always_inline
xen: detect uninitialized xenbus in xenbus_init
xen: flag xen_snd_front to be not essential for system boot
xen: flag pvcalls-front to be not essential for system boot
xen: flag hvc_xen to be not essential for system boot
xen: flag xen_drm_front to be not essential for system boot
xen: add "not_essential" flag to struct xenbus_driver
xen/pvh: add missing prototype to header
xen: don't continue xenstore initialization in case of errors
xen/privcmd: make option visible in Kconfig
Linus Torvalds [Fri, 26 Nov 2021 17:30:24 +0000 (09:30 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Three arm64 fixes.
The main one is a fix to the way in which we evaluate the macro
arguments to our uaccess routines, which we _think_ might be the root
cause behind some unkillable tasks we've seen in the Android arm64 CI
farm (testing is ongoing). In any case, it's worth fixing.
Other than that, we've toned down an over-zealous VM_BUG_ON() and
fixed ftrace stack unwinding in a bunch of cases.
Summary:
- Evaluate uaccess macro arguments outside of the critical section
- Tighten up VM_BUG_ON() in pmd_populate_kernel() to avoid false positive
- Fix ftrace stack unwinding using HAVE_FUNCTION_GRAPH_RET_ADDR_PTR"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: uaccess: avoid blocking within critical sections
arm64: mm: Fix VM_BUG_ON(mm != &init_mm) for trans_pgd
arm64: ftrace: use HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
Jens Axboe [Fri, 26 Nov 2021 16:53:23 +0000 (09:53 -0700)]
block: call rq_qos_done() before ref check in batch completions
We need to call rq_qos_done() regardless of whether or not we're freeing
the request or not, as the reference count doesn't cover the IO completion
tracking.
Fixes: f794f3351f26 ("block: add support for blk_mq_end_request_batch()") Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reported-by: Kenneth R. Crudup <kenny@panix.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
674ee8e1b4a41 ("io_uring: correct link-list traversal locking") fixed a
data race but introduced a possible deadlock and inconsistentcy in irq
states. E.g.
Another type of problem is freeing a request while holding
->timeout_lock, which may leads to a deadlock in
io_commit_cqring() -> io_flush_timeouts() and other places.
Having 3 nested locks is also too ugly. Add io_match_task_safe(), which
would briefly take and release timeout_lock for race prevention inside,
so the actuall request cancellation / free / etc. code doesn't have it
taken.
Jakub Kicinski [Fri, 26 Nov 2021 03:28:20 +0000 (19:28 -0800)]
Merge branch 'tls-splice_read-fixes'
Jakub Kicinski says:
====================
tls: splice_read fixes
As I work my way to unlocked and zero-copy TLS Rx the obvious bugs
in the splice_read implementation get harder and harder to ignore.
This is to say the fixes here are discovered by code inspection,
I'm not aware of anyone actually using splice_read.
====================
Jakub Kicinski [Wed, 24 Nov 2021 23:25:57 +0000 (15:25 -0800)]
selftests: tls: test for correct proto_ops
Previous patch fixes overriding callbacks incorrectly. Triggering
the crash in sendpage_locked would be more spectacular but it's
hard to get to, so take the easier path of proving this is broken
and call getname. We're currently getting IPv4 socket info on an
IPv6 socket.
Jakub Kicinski [Wed, 24 Nov 2021 23:25:56 +0000 (15:25 -0800)]
tls: fix replacing proto_ops
We replace proto_ops whenever TLS is configured for RX. But our
replacement also overrides sendpage_locked, which will crash
unless TX is also configured. Similarly we plug both of those
in for TLS_HW (NIC crypto offload) even tho TLS_HW has a completely
different implementation for TX.
Last but not least we always plug in something based on inet_stream_ops
even though a few of the callbacks differ for IPv6 (getname, release,
bind).
Use a callback building method similar to what we do for struct proto.
Fixes: c46234ebb4d1 ("tls: RX path for ktls") Fixes: d4ffb02dee2f ("net/tls: enable sk_msg redirect to tls socket egress") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 24 Nov 2021 23:25:54 +0000 (15:25 -0800)]
tls: splice_read: fix accessing pre-processed records
recvmsg() will put peek()ed and partially read records onto the rx_list.
splice_read() needs to consult that list otherwise it may miss data.
Align with recvmsg() and also put partially-read records onto rx_list.
tls_sw_advance_skb() is pretty pointless now and will be removed in
net-next.
Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 24 Nov 2021 23:25:52 +0000 (15:25 -0800)]
tls: splice_read: fix record type check
We don't support splicing control records. TLS 1.3 changes moved
the record type check into the decrypt if(). The skb may already
be decrypted and still be an alert.
Note that decrypt_skb_update() is idempotent and updates ctx->decrypted
so the if() is pointless.
Reorder the check for decryption errors with the content type check
while touching them. This part is not really a bug, because if
decryption failed in TLS 1.3 content type will be DATA, and for
TLS 1.2 it will be correct. Nevertheless its strange to touch output
before checking if the function has failed.
Fixes: fedf201e1296 ("net: tls: Refactor control message handling on recv") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 26 Nov 2021 02:21:20 +0000 (18:21 -0800)]
Merge tag 'drm-fixes-2021-11-26' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"No idea if turkey comes before pull request processing, but here's the
regular week's fixes. A bunch for amdgpu, nouveau adds support for a
new GPU (like a PCI ID addition), and a scattering of fixes across
i915/hyperv/aspeed/vc4.
* tag 'drm-fixes-2021-11-26' of git://anongit.freedesktop.org/drm/drm: (25 commits)
drm/amd/display: update bios scratch when setting backlight
drm/amdgpu/pm: fix powerplay OD interface
drm/amdgpu: Skip ASPM programming on aldebaran
drm/amdgpu: fix byteorder error in amdgpu discovery
drm/amdgpu: enable Navi retry fault wptr overflow
drm/amdgpu: enable Navi 48-bit IH timestamp counter
drm/amdkfd: simplify drain retry fault
drm/amdkfd: handle VMA remove race
drm/amdkfd: process exit and retry fault race
drm/amdgpu: IH process reset count when restart
drm/amdgpu/gfx9: switch to golden tsc registers for renoir+
drm/amdgpu/gfx10: add wraparound gpu counter check for APUs as well
drm/amdgpu: move kfd post_reset out of reset_sriov function
drm/amd/display: Fixed DSC would not PG after removing DSC stream
drm/amd/display: Reset link encoder assignments for GPU reset
drm/amd/display: Set plane update flags for all planes in reset
drm/amd/display: Fix DPIA outbox timeout after GPU reset
drm/amdgpu: Fix double free of dmabuf
drm/amdgpu: Fix MMIO HDP flush on SRIOV
drm/i915/gt: Hold RPM wakelock during PXP suspend
...
Dave Airlie [Fri, 26 Nov 2021 00:08:10 +0000 (10:08 +1000)]
Merge tag 'drm-misc-fixes-2021-11-25' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
One removal fix for hyperv, one fix in aspeed for the vga_pw sysfs file
content, one error-checking fix for vc4 and two fixes for nouveau, one
to support a new device and another one to properly check for errors.
Linus Torvalds [Thu, 25 Nov 2021 19:06:05 +0000 (11:06 -0800)]
Merge tag 'block-5.16-2021-11-25' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- Add a NO APST quirk for a Kioxia device (Enzo Matsumiya)
- Fix write zeroes pi (Klaus Jensen)
- Various TCP transport fixes (Maurizio Lombardi and Varun
Prakash)
- Ignore invalid fast_io_fail_tmo values (Maurizio Lombardi)
- Use IOCB_NOWAIT only if the filesystem supports it (Maurizio
Lombardi)
- Module loading fix (Ming)
- Kerneldoc warning fix (Yang)
* tag 'block-5.16-2021-11-25' of git://git.kernel.dk/linux-block:
block: fix parameter not described warning
nvmet: use IOCB_NOWAIT only if the filesystem supports it
nvme: fix write zeroes pi
nvme-fabrics: ignore invalid fast_io_fail_tmo values
nvme-pci: add NO APST quirk for Kioxia device
nvme-tcp: fix memory leak when freeing a queue
nvme-tcp: validate R2T PDU in nvme_tcp_handle_r2t()
nvmet-tcp: fix incomplete data digest send
nvmet-tcp: fix memory leak when performing a controller reset
nvmet-tcp: add an helper to free the cmd buffers
nvmet-tcp: fix a race condition between release_queue and io_work
block: avoid to touch unloaded module instance when opening bdev
Linus Torvalds [Thu, 25 Nov 2021 18:48:14 +0000 (10:48 -0800)]
Merge tag '5.16-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Four small cifs/smb3 fixes:
- two multichannel fixes
- fix problem noted by kernel test robot
- update internal version number"
* tag '5.16-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
smb2: clarify rc initialization in smb2_reconnect
cifs: populate server_hostname for extra channels
cifs: nosharesock should be set on new server
Linus Torvalds [Thu, 25 Nov 2021 18:41:28 +0000 (10:41 -0800)]
Merge tag 'asm-generic-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic syscall table update from Arnd Bergmann:
"André Almeida sends an update for the newly added futex_waitv syscall
that was initially only added to a few architectures.
Some additional ones have since made it through architecture
maintainer trees, this finishes the remaining ones"
* tag 'asm-generic-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
futex: Wireup futex_waitv syscall
Linus Torvalds [Thu, 25 Nov 2021 18:31:37 +0000 (10:31 -0800)]
Merge tag 'arm-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are only a few devicetree fixes this time:
- one outdated devicetree property that slipped into the newly added
ExynosAutov9 support
- three changes to Broadcom SoCs that had incorrect number values for
interrupts or irqchips.
In the MAINTAINERS file, Nishanth Menon gets listed for TI K3 SoCs,
while Taichi Sugaya and Takao Orito take ownership of the Socionext
Milbeaut platform.
All other changes are for SoC specific drivers, fixing:
- A missing NULL pointer check in the mediatek memory driver
- An integer overflow issue in the Arm smccc firwmare interface
- A false-positive fortify-source check
- Error handling fixes for optee and smci
- Incorrect message format in one SCMI call"
* tag 'arm-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
memory: mtk-smi: Fix a null dereference for the ostd
arm64: dts: exynos: drop samsung,ufs-shareability-reg-offset in ExynosAutov9
MAINTAINERS: Update maintainer entry for keystone platforms
MAINTAINERS: Add entry to MAINTAINERS for Milbeaut
firmware: smccc: Fix check for ARCH_SOC_ID not implemented
ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE
firmware: arm_scmi: Fix type error assignment in voltage protocol
firmware: arm_scmi: Fix type error in sensor protocol
firmware: arm_scmi: pm: Propagate return value to caller
firmware: arm_scmi: Fix base agent discover response
optee: fix kfree NULL pointer
ARM: dts: bcm2711: Fix PCIe interrupts
ARM: dts: BCM5301X: Add interrupt properties to GPIO node
ARM: dts: BCM5301X: Fix I2C controller interrupt
firmware: arm_scmi: Fix null de-reference on error path
Linus Torvalds [Thu, 25 Nov 2021 18:13:56 +0000 (10:13 -0800)]
Merge tag 'folio-5.16b' of git://git.infradead.org/users/willy/pagecache
Pull folio fixes from Matthew Wilcox:
"In the course of preparing the folio changes for iomap for next merge
window, we discovered some problems that would be nice to address now:
- Renaming multi-page folios to large folios.
mapping_multi_page_folio_support() is just a little too long, so we
settled on mapping_large_folio_support(). That meant renaming, eg
folio_test_multi() to folio_test_large().
Rename AS_THP_SUPPORT to match
- I hadn't included folio wrappers for zero_user_segments(), etc.
Also, multi-page^W^W large folio support is now independent of
CONFIG_TRANSPARENT_HUGEPAGE, so machines with HIGHMEM always need
to fall back to the out-of-line zero_user_segments().
Remove FS_THP_SUPPORT to match
- The build bots finally got round to telling me that I missed a
couple of architectures when adding flush_dcache_folio(). Christoph
suggested that we just add linux/cacheflush.h and not rely on
asm-generic/cacheflush.h"
* tag 'folio-5.16b' of git://git.infradead.org/users/willy/pagecache:
mm: Add functions to zero portions of a folio
fs: Rename AS_THP_SUPPORT and mapping_thp_support
fs: Remove FS_THP_SUPPORT
mm: Remove folio_test_single
mm: Rename folio_test_multi to folio_test_large
Add linux/cacheflush.h
Huang Pei [Thu, 25 Nov 2021 10:59:48 +0000 (18:59 +0800)]
MIPS: use 3-level pgtable for 64KB page size on MIPS_VA_BITS_48
It hangup when booting Loongson 3A1000 with BOTH
CONFIG_PAGE_SIZE_64KB and CONFIG_MIPS_VA_BITS_48, that it turn
out to use 2-level pgtable instead of 3-level. 64KB page size
with 2-level pgtable only cover 42 bits VA, use 3-level pgtable
to cover all 48 bits VA(55 bits)
Fixes: 1e321fa917fb ("MIPS64: Support of at least 48 bits of SEGBITS) Signed-off-by: Huang Pei <huangpei@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Huang Pei [Thu, 25 Nov 2021 10:59:49 +0000 (18:59 +0800)]
MIPS: loongson64: fix FTLB configuration
It turns out that 'decode_configs' -> 'set_ftlb_enable' is called under
c->cputype unset, which leaves FTLB disabled on BOTH 3A2000 and 3A3000
Fix it by calling "decode_configs" after c->cputype is initialized
Fixes: da1bd29742b1 ("MIPS: Loongson64: Probe CPU features via CPUCFG") Signed-off-by: Huang Pei <huangpei@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Dylan Hung [Thu, 25 Nov 2021 02:44:32 +0000 (10:44 +0800)]
mdio: aspeed: Fix "Link is Down" issue
The issue happened randomly in runtime. The message "Link is Down" is
popped but soon it recovered to "Link is Up".
The "Link is Down" results from the incorrect read data for reading the
PHY register via MDIO bus. The correct sequence for reading the data
shall be:
1. fire the command
2. wait for command done (this step was missing)
3. wait for data idle
4. read data from data register
Cc: stable@vger.kernel.org Fixes: f160e99462c6 ("net: phy: Add mdio-aspeed") Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20211125024432.15809-1-dylan_hung@aspeedtech.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jesse Brandeburg [Tue, 23 Nov 2021 20:40:00 +0000 (12:40 -0800)]
igb: fix netpoll exit with traffic
Oleksandr brought a bug report where netpoll causes trace
messages in the log on igb.
Danielle brought this back up as still occurring, so we'll try
again.
[22038.710800] ------------[ cut here ]------------
[22038.710801] igb_poll+0x0/0x1440 [igb] exceeded budget in poll
[22038.710802] WARNING: CPU: 12 PID: 40362 at net/core/netpoll.c:155 netpoll_poll_dev+0x18a/0x1a0
As Alex suggested, change the driver to return work_done at the
exit of napi_poll, which should be safe to do in this driver
because it is not polling multiple queues in this single napi
context (multiple queues attached to one MSI-X vector). Several
other drivers contain the same simple sequence, so I hope
this will not create new problems.
Jens Axboe [Thu, 25 Nov 2021 14:51:24 +0000 (07:51 -0700)]
Merge tag 'nvme-5.16-2021-11-25' of git://git.infradead.org/nvme into block-5.16
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 5.16
- add a NO APST quirk for a Kioxia device (Enzo Matsumiya)
- fix write zeroes pi (Klaus Jensen)
- various TCP transport fixes (Maurizio Lombardi and Varun Prakash)
- ignore invalid fast_io_fail_tmo values (Maurizio Lombardi)
- use IOCB_NOWAIT only if the filesystem supports it (Maurizio Lombardi)"
* tag 'nvme-5.16-2021-11-25' of git://git.infradead.org/nvme:
nvmet: use IOCB_NOWAIT only if the filesystem supports it
nvme: fix write zeroes pi
nvme-fabrics: ignore invalid fast_io_fail_tmo values
nvme-pci: add NO APST quirk for Kioxia device
nvme-tcp: fix memory leak when freeing a queue
nvme-tcp: validate R2T PDU in nvme_tcp_handle_r2t()
nvmet-tcp: fix incomplete data digest send
nvmet-tcp: fix memory leak when performing a controller reset
nvmet-tcp: add an helper to free the cmd buffers
nvmet-tcp: fix a race condition between release_queue and io_work
projects / linux-stable / log