Mark Brown writes:
I nacked this patch when Sasha posted it - it only improves
diagnostics and might make systems that worked by accident break
since it turns things into a hard failure, it won't make
anything that didn't work previously work.
Reported-by: Mark Brown <broonie@kernel.org> Cc: Ricard Wanderlof <ricardw@axis.com> Cc: Sasha Levin <sashal@kernel.org> Link: https://lore.kernel.org/lkml/20190904181027.GG4348@sirena.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Switching from ->priv_destructor to dellink() has an unexpected
consequence: existing RCU readers, that is, hsr_port_get_hsr()
callers, may still be able to read the port list.
Instead of checking the return value of each hsr_port_get_hsr(),
we can just move it to ->ndo_uninit() which is called after
device unregister and synchronize_net(), and we still have RTNL
lock there.
Fixes: b9a1e627405d ("hsr: implement dellink to clean up resources") Fixes: edf070a0fb45 ("hsr: fix a NULL pointer deref in hsr_dev_xmit()") Reported-by: syzbot+097ef84cdc95843fbaa8@syzkaller.appspotmail.com Cc: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Cc: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
hsr_link_ops implements ->newlink() but not ->dellink(),
which leads that resources not released after removing the device,
particularly the entries in self_node_db and node_db.
So add ->dellink() implementation to replace the priv_destructor.
This also makes the code slightly easier to understand.
Reported-by: syzbot+c6167ec3de7def23d1e8@syzkaller.appspotmail.com Cc: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzkaller managed to trigger the warning in bpf_jit_free() which checks via
bpf_prog_kallsyms_verify_off() for potentially unlinked JITed BPF progs
in kallsyms, and subsequently trips over GPF when walking kallsyms entries:
Upon further debugging, it turns out that whenever we trigger this
issue, the kallsyms removal in bpf_prog_ksym_node_del() was /skipped/
but yet bpf_jit_free() reported that the entry is /in use/.
Problem is that symbol exposure via bpf_prog_kallsyms_add() but also
perf_event_bpf_event() were done /after/ bpf_prog_new_fd(). Once the
fd is exposed to the public, a parallel close request came in right
before we attempted to do the bpf_prog_kallsyms_add().
Given at this time the prog reference count is one, we start to rip
everything underneath us via bpf_prog_release() -> bpf_prog_put().
The memory is eventually released via deferred free, so we're seeing
that bpf_jit_free() has a kallsym entry because we added it from
bpf_prog_load() but /after/ bpf_prog_put() from the remote CPU.
Therefore, move both notifications /before/ we install the fd. The
issue was never seen between bpf_prog_alloc_id() and bpf_prog_new_fd()
because upon bpf_prog_get_fd_by_id() we'll take another reference to
the BPF prog, so we're still holding the original reference from the
bpf_prog_load().
Fixes: 6ee52e2a3fe4 ("perf, bpf: Introduce PERF_RECORD_BPF_EVENT") Fixes: 74451e66d516 ("bpf: make jited programs visible in traces") Reported-by: syzbot+bd3bba6ff3fcea7a6ec6@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Song Liu <songliubraving@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I incorrectly merged commit 31a2fbb390fe ("x86/ptrace: Fix possible
spectre-v1 in ptrace_get_debugreg()") when backporting it, as was
graciously pointed out at
https://grsecurity.net/teardown_of_a_failed_linux_lts_spectre_fix.php
Resolve the upstream difference with the stable kernel merge to properly
protect things.
This patch fixes the intel_configure_pps_for_dsc_encoder() function to use
cpu_transcoder instead of encoder->type to select the correct DSC registers
that was wrongly used in the original patch for one DSC register isntance.
Fixes: 7182414e2530 ("drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling") Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.0+ Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190821215950.24223-1-manasi.d.navare@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
We're not allowed to create new properties after device registration
so for MST connectors we need to either create the max_bpc property
earlier, or we reuse one we already have. Let's do the latter apporach
since the corresponding SST connector already has the prop and its
min/max are correct also for the MST connector.
The problem was highlighted by commit 4f5368b5541a ("drm/kms:
Catch mode_object lifetime errors") which results in the following
spew:
[ 1330.878941] WARNING: CPU: 2 PID: 1554 at drivers/gpu/drm/drm_mode_object.c:45 __drm_mode_object_add+0xa0/0xb0 [drm]
...
[ 1330.879008] Call Trace:
[ 1330.879023] drm_property_create+0xba/0x180 [drm]
[ 1330.879036] drm_property_create_range+0x15/0x30 [drm]
[ 1330.879048] drm_connector_attach_max_bpc_property+0x62/0x80 [drm]
[ 1330.879086] intel_dp_add_mst_connector+0x11f/0x140 [i915]
[ 1330.879094] drm_dp_add_port.isra.20+0x20b/0x440 [drm_kms_helper]
...
Cc: stable@vger.kernel.org Cc: Lyude Paul <lyude@redhat.com> Cc: sunpeng.li@amd.com Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <sean@poorly.run> Fixes: 5ca0ef8a56b8 ("drm/i915: Add max_bpc property for DP MST") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190820161657.9658-1-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We need to use a different firmware for C0 versions of killer Qu NICs.
Add structures for them and handle them in the if block that detects
C0 revisions.
Additionally, instead of having an inclusive check for QnJ devices,
make the selection exclusive, so that switching to QnJ is the
exception, not the default. This prevents us from having to add all
the non-QnJ cards to an exclusion list. To do so, only go into the
QnJ block if the device has an RF ID type HR and HW revision QnJ.
We have a too generic condition that switches from Qu configurations
to QnJ configurations. We need to exclude some configurations so that
they are not erroneously switched. Add the ax201 configuration to the
list of exclusions.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add support for C-step devices. Currently we don't have a nice way of
matching the step and choosing the proper configuration, so we need to
switch the config structs one by one.
Cc: stable@vger.kernel.org Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The noencrypt flag was intended to be set if the "frame was received
unencrypted" according to include/uapi/linux/nl80211.h. However, the
current behavior is opposite of this.
Cc: stable@vger.kernel.org Fixes: 018f6fbf540d ("mac80211: Send control port frames over nl80211") Signed-off-by: Denis Kenzior <denkenz@gmail.com> Link: https://lore.kernel.org/r/20190827224120.14545-3-denkenz@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In ieee80211_deliver_skb_to_local_stack intercepts EAPoL frames if
mac80211 is configured to do so and forwards the contents over nl80211.
During this process some additional data is also forwarded, including
whether the frame was received encrypted or not. Unfortunately just
prior to the call to ieee80211_deliver_skb_to_local_stack, skb->cb is
cleared, resulting in incorrect data being exposed over nl80211.
Fixes: 018f6fbf540d ("mac80211: Send control port frames over nl80211") Cc: stable@vger.kernel.org Signed-off-by: Denis Kenzior <denkenz@gmail.com> Link: https://lore.kernel.org/r/20190827224120.14545-2-denkenz@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1) Allow the userspace to install pairwise keys using keyid 1 without
NL80211_KEY_NO_TX set. This allows the userspace to install and
activate pairwise keys with keyid 1 in the same way as for keyid 0,
simplifying the API usage for e.g. FILS and FT key installs.
2) IEEE 802.11 - 2016 restricts Extended Key ID usage to CCMP/GCMP
ciphers in IEEE 802.11 - 2016 "9.4.2.25.4 RSN capabilities".
Enforce that when installing a key.
Cc: stable@vger.kernel.org # 5.2 Fixes: 6cdd3979a2bd ("nl80211/cfg80211: Extended Key ID support") Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Link: https://lore.kernel.org/r/20190805123400.51567-1-alexander@wetzel-home.de Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If TDLS station addition is rejected, the sta memory is leaked.
Avoid this by moving the check before the allocation.
Cc: stable@vger.kernel.org Fixes: 7ed5285396c2 ("mac80211: don't initiate TDLS connection if station is not associated to AP") Link: https://lore.kernel.org/r/20190801073033.7892-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 96cce12ff6e0 ("cfg80211: fix processing world
regdomain when non modular").
Re-triggering a reg_process_hint with the last request on all events,
can make the regulatory domain fail in case of multiple WiFi modules. On
slower boards (espacially with mdev), enumeration of the WiFi modules
can end up in an intersected regulatory domain, and user cannot set it
with 'iw reg set' anymore.
This is happening, because:
- 1st module enumerates, queues up a regulatory request
- request gets processed by __reg_process_hint_driver():
- checks if previous was set by CORE -> yes
- checks if regulator domain changed -> yes, from '00' to e.g. 'US'
-> sends request to the 'crda'
- 2nd module enumerates, queues up a regulator request (which triggers
the reg_todo() work)
- reg_todo() -> reg_process_pending_hints() sees, that the last request
is not processed yet, so it tries to process it again.
__reg_process_hint driver() will run again, and:
- checks if the last request's initiator was the core -> no, it was
the driver (1st WiFi module)
- checks, if the previous initiator was the driver -> yes
- checks if the regulator domain changed -> yes, it was '00' (set by
core, and crda call did not return yet), and should be changed to 'US'
------> __reg_process_hint_driver calls an intersect
Besides, the reg_process_hint call with the last request is meaningless
since the crda call has a timeout work. If that timeout expires, the
first module's request will lost.
Cc: stable@vger.kernel.org Fixes: 96cce12ff6e0 ("cfg80211: fix processing world regdomain when non modular") Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com> Link: https://lore.kernel.org/r/20190614131600.GA13897@a1-hr Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of using raw_cpu_read() use per_cpu() to read the actual data of
the corresponding cpu otherwise we will be reading the data of the
current cpu for the number of online CPUs.
Link: http://lkml.kernel.org/r/20190829203110.129263-1-shakeelb@google.com Fixes: bb65f89b7d3d ("mm: memcontrol: flush percpu vmevents before releasing memcg") Fixes: c350a99ea2b1 ("mm: memcontrol: flush percpu vmstats before releasing memcg") Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 766a4c19d880 ("mm/memcontrol.c: keep local VM counters in sync
with the hierarchical ones") effectively decreased the precision of
per-memcg vmstats_local and per-memcg-per-node lruvec percpu counters.
That's good for displaying in memory.stat, but brings a serious
regression into the reclaim process.
One issue I've discovered and debugged is the following:
lruvec_lru_size() can return 0 instead of the actual number of pages in
the lru list, preventing the kernel to reclaim last remaining pages.
Result is yet another dying memory cgroups flooding. The opposite is
also happening: scanning an empty lru list is the waste of cpu time.
Also, inactive_list_is_low() can return incorrect values, preventing the
active lru from being scanned and freed. It can fail both because the
size of active and inactive lists are inaccurate, and because the number
of workingset refaults isn't precise. In other words, the result is
pretty random.
I'm not sure, if using the approximate number of slab pages in
count_shadow_number() is acceptable, but issues described above are
enough to partially revert the patch.
Let's keep per-memcg vmstat_local batched (they are only used for
displaying stats to the userspace), but keep lruvec stats precise. This
change fixes the dead memcg flooding on my setup.
Link: http://lkml.kernel.org/r/20190817004726.2530670-1-guro@fb.com Fixes: 766a4c19d880 ("mm/memcontrol.c: keep local VM counters in sync with the hierarchical ones") Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Yafang Shao <laoar.shao@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a CCP is unconfigured (e.g. there are no available queues) then
there will be no data structures allocated for the device. Thus, we
must check for validity of a pointer before trying to access structure
members.
Fixes: 720419f01832f ("crypto: ccp - Introduce the AMD Secure Processor device") Cc: <stable@vger.kernel.org> Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Francois reported that VMware balloon gets stuck after a balloon reset,
when the VMCI doorbell is removed. A similar error can occur when the
balloon driver is removed with the following splat:
The cause for the bug is that when the "delayed" doorbell is invoked, it
takes a reference on the doorbell entry and schedules work that is
supposed to run the appropriate code and drop the doorbell entry
reference. The code ignores the fact that if the work is already queued,
it will not be scheduled to run one more time. As a result one of the
references would not be dropped. When the code waits for the reference
to get to zero, during balloon reset or module removal, it gets stuck.
Fix it. Drop the reference if schedule_work() indicates that the work is
already queued.
Note that this bug got more apparent (or apparent at all) due to
commit ce664331b248 ("vmw_balloon: VMCI_DOORBELL_SET does not check status").
The original driver author seemed to be under the impression that a driver
cannot be removed if it does not have a .remove method. Or maybe if it is
a built-in platform driver.
If, after registering a logical PIO range, the driver probe later fails,
the logical PIO range memory will be released automatically.
This causes an issue, in that the logical PIO range is not unregistered
and the released range memory may be later referenced.
Fix by unregistering the logical PIO range.
And since we now unregister the logical PIO range for probe failure, avoid
the special ordering of setting logical PIO range ops, which was the
previous (poor) attempt at a safeguard against this.
Cc: stable@vger.kernel.org Fixes: adf38bb0b595 ("HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings") Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Family 16h Model 30h SMBus controller needs the same port selection fix
as described and fixed in commit 0fe16195f891 ("i2c: piix4: Fix SMBus port
selection for AMD Family 17h chips")
commit 6befa3fde65f ("i2c: piix4: Support alternative port selection
register") also fixed the port selection for Hudson2, but unfortunately
this is not the exact same device and the AMD naming and PCI Device IDs
aren't particularly helpful here.
The SMBus port selection register is common to the following Families
and models, as documented in AMD's publicly available BIOS and Kernel
Developer Guides:
50742 - Family 15h Model 60h-6Fh (PCI_DEVICE_ID_AMD_KERNCZ_SMBUS)
55072 - Family 15h Model 70h-7Fh (PCI_DEVICE_ID_AMD_KERNCZ_SMBUS)
52740 - Family 16h Model 30h-3Fh (PCI_DEVICE_ID_AMD_HUDSON2_SMBUS)
The Hudson2 PCI Device ID (PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) is shared
between Bolton FCH and Family 16h Model 30h, but the location of the
SmBus0Sel port selection bits are different:
51192 - Bolton Register Reference Guide
We distinguish between Bolton and Family 16h Model 30h using the PCI
Revision ID:
Bolton is device 0x780b, revision 0x15
Family 16h Model 30h is device 0x780b, revision 0x1F
Family 15h Model 60h and 70h are both device 0x790b, revision 0x4A.
The following additional public AMD BKDG documents were checked and do
not share the same port selection register:
42301 - Family 15h Model 00h-0Fh doesn't mention any
42300 - Family 15h Model 10h-1Fh doesn't mention any
49125 - Family 15h Model 30h-3Fh doesn't mention any
48751 - Family 16h Model 00h-0Fh uses the previously supported
index register SB800_PIIX4_PORT_IDX_ALT at 0x2e
Signed-off-by: Andrew Cooks <andrew.cooks@opengear.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org [v4.6+] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, we don't call dma_set_max_seg_size() for i915 because we
intentionally do not limit the segment length that the device supports.
However, this results in a warning being emitted if we try to map
anything larger than SZ_64K on a kernel with CONFIG_DMA_API_DEBUG_SG
enabled:
[ 7.751926] DMA-API: i915 0000:00:02.0: mapping sg segment longer
than device claims to support [len=98304] [max=65536]
[ 7.751934] WARNING: CPU: 5 PID: 474 at kernel/dma/debug.c:1220
debug_dma_map_sg+0x20f/0x340
This was originally brought up on
https://bugs.freedesktop.org/show_bug.cgi?id=108517 , and the consensus
there was it wasn't really useful to set a limit (and that dma-debug
isn't really all that useful for i915 in the first place). Unfortunately
though, CONFIG_DMA_API_DEBUG_SG is enabled in the debug configs for
various distro kernels. Since a WARN_ON() will disable automatic problem
reporting (and cause any CI with said option enabled to start
complaining), we really should just fix the problem.
Note that as me and Chris Wilson discussed, the other solution for this
would be to make DMA-API not make such assumptions when a driver hasn't
explicitly set a maximum segment size. But, taking a look at the commit
which originally introduced this behavior, commit 78c47830a5cb
("dma-debug: check scatterlist segments"), there is an explicit mention
of this assumption and how it applies to devices with no segment size:
Conversely, devices which are less limited than the rather
conservative defaults, or indeed have no limitations at all
(e.g. GPUs with their own internal MMU), should be encouraged to
set appropriate dma_parms, as they may get more efficient DMA
mapping performance out of it.
So unless there's any concerns (I'm open to discussion!), let's just
follow suite and call dma_set_max_seg_size() with UINT_MAX as our limit
to silence any warnings.
Changes since v3:
* Drop patch for enabling CONFIG_DMA_API_DEBUG_SG in CI. It looks like
just turning it on causes the kernel to spit out bogus WARN_ONs()
during some igt tests which would otherwise require teaching igt to
disable the various DMA-API debugging options causing this. This is
too much work to be worth it, since DMA-API debugging is useless for
us. So, we'll just settle with this single patch to squelch WARN_ONs()
during driver load for users that have CONFIG_DMA_API_DEBUG_SG turned
on for some reason.
* Move dma_set_max_seg_size() call into i915_driver_hw_probe() - Chris
Wilson
Four drm_mm_node are used to reserve guest ggtt space, but some of them
may be skipped and not initialised due to space constraints in
intel_vgt_balloon(). If drm_mm_remove_node() is called with
uninitialized drm_mm_node, the above call trace occurs.
This patch check drm_mm_node's validity before calling
drm_mm_remove_node().
Fixes: ff8f797557c7("drm/i915: return the correct usable aperture size under gvt environment") Cc: stable@vger.kernel.org Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1566279978-9659-1-git-send-email-xiong.y.zhang@intel.com
(cherry picked from commit 4776f3529d6b1e47f02904ad1d264d25ea22b27b) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For picasso(adev->pdev->device == 0x15d8)&raven2(adev->rev_id >= 0x8),
firmware is sufficient to support gfxoff.
In commit 98f58ada2d37e, for picasso&raven2,
return directly and cause gfxoff disabled.
Fixes: 98f58ada2d37 ("drm/amdgpu/gfx9: update pg_flags after determining if gfx off is possible") Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Logical PIO space can still be leaked when unregistering certain
LOGIC_PIO_CPU_MMIO regions, but this acceptable for now since there are no
callers to unregister LOGIC_PIO_CPU_MMIO regions, and the logical PIO
region allocation scheme would need significant work to improve this.
The code was originally written to not support unregistering logical PIO
regions.
To accommodate supporting unregistering logical PIO regions, subtly modify
LOGIC_PIO_CPU_MMIO region registration code, such that the "end" of the
registered regions is the "end" of the last region, and not the sum of
the sizes of all the registered regions.
The traversing of io_range_list with list_for_each_entry_rcu()
is not properly protected by rcu_read_lock() and rcu_read_unlock(),
so add them.
These functions mark the critical section scope where the list is
protected for the reader, it cannot be "reclaimed". Any updater - in
this case, the logical PIO registration functions - cannot update the
list until the reader exits this critical section.
In addition, the list traversing used in logic_pio_register_range()
does not need to use the rcu variant.
This is because we are already using io_range_mutex to guarantee mutual
exclusion from mutating the list.
This reverts commit a79f194aa4879e9baad118c3f8bb2ca24dbef765.
The mechanism for aborting I/O is racy, since we are not guaranteed that
the request is asleep while we're changing both task->tk_status and
task->tk_action.
lkdtm/bugs.c:94:2: error: format '%d' expects argument of type 'int', but argument 2 has type 'long unsigned int' [-Werror=format=]
pr_info("Calling function with %d frame size to depth %d ...\n",
^
THREAD_SIZE is defined as a unsigned long, cast CONFIG_FRAME_WARN to
unsigned long as well.
Fixes: 24cccab42c419 ("lkdtm/bugs: Adjust recursion test to avoid elision") Cc: stable <stable@vger.kernel.org> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Acked-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20190827173619.170065-1-rrangel@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The scom driver currently fails out of operations if certain system
errors are flagged in the status register; system checkstop, special
attention, or recoverable error. These errors won't impact the ability
of the scom engine to perform operations, so the driver should continue
under these conditions.
Also, don't do a PIB reset for these conditions, since it won't help.
Fixes: 6b293258cded ("fsi: scom: Major overhaul") Signed-off-by: Eddie James <eajames@linux.ibm.com> Cc: stable <stable@vger.kernel.org> Acked-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20190827041249.13381-1-jk@ozlabs.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There appears to be a typo in the comparison of pdo_max_voltage[i]
with the previous value, currently it is checking against the
array pdo_min_voltage rather than pdo_max_voltage. I believe this
is a typo. Fix this.
Addresses-Coverity: ("Copy-paste error") Fixes: 5007e1b5db73 ("typec: tcpm: Validate source and sink caps") Cc: stable <stable@vger.kernel.org> Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20190822135212.10195-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the error path of stm_source_register_device(), the kfree is
unnecessary, as the put_device() before it ends up calling
stm_source_device_release() to free stm_source_device, leading to
a double free at the outer kfree() call. Remove it.
The OCR register defines the supported range of VDD voltages for SD cards.
However, it has turned out that some SD cards reports an invalid voltage
range, for example having bit7 set.
When a host supports MMC_CAP2_FULL_PWR_CYCLE and some of the voltages from
the invalid VDD range, this triggers the core to run a power cycle of the
card to try to initialize it at the lowest common supported voltage.
Obviously this fails, since the card can't support it.
Let's fix this problem, by clearing invalid bits from the read OCR register
for SD cards, before proceeding with the VDD voltage negotiation.
Cc: stable@vger.kernel.org Reported-by: Philip Langdale <philipl@overt.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Philip Langdale <philipl@overt.org> Tested-by: Philip Langdale <philipl@overt.org> Tested-by: Manuel Presnitz <mail@mpy.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IP datasheet says this controller is compatible with SD Host
Specification Version v4.00.
As it turned out, the ADMA of this IP does not work with 64-bit mode
when it is in the Version 3.00 compatible mode; it understands the
old 64-bit descriptor table (as defined in SDHCI v2), but the ADMA
System Address Register (SDHCI_ADMA_ADDRESS) cannot point to the
64-bit address.
I noticed this issue only after commit bd2e75633c80 ("dma-contiguous:
use fallback alloc_pages for single pages"). Prior to that commit,
dma_set_mask_and_coherent() returned the dma address that fits in
32-bit range, at least for the default arm64 configuration
(arch/arm64/configs/defconfig). Now the host->adma_addr exceeds the
32-bit limit, causing the real problem for the Socionext SoCs.
(As a side-note, I was also able to reproduce the issue for older
kernels by turning off CONFIG_DMA_CMA.)
HS200 is not implemented in the driver, but the controller claims it
through caps. Remove it via a quirk, to make sure the mmc core do not try
to enable HS200, as it causes the eMMC initialization to fail.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: bb5f8ea4d514 ("mmc: sdhci-of-at91: introduce driver for the Atmel SDMMC") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The WRITE_PROTECT bit is always in a "protected mode" on Tegra and
WP-GPIO state need to be used instead. In a case of the GPIO absence,
write-enable should be assumed. External SD is writable once again as
a result of this patch because the offending commit changed behaviour for
the case of a missing WP-GPIO to fall back to WRITE_PROTECT bit-checking,
which is incorrect for Tegra.
A guest is not allowed to inject a SGI (or clear its pending state)
by writing to GICD_ISPENDR0 (resp. GICD_ICPENDR0), as these bits are
defined as WI (as per ARM IHI 0048B 4.3.7 and 4.3.8).
Make sure we correctly emulate the architecture.
Fixes: 96b298000db4 ("KVM: arm/arm64: vgic-new: Add PENDING registers handlers") Cc: stable@vger.kernel.org # 4.7+ Reported-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the ap_list is longer than 256 entries, merge_final() in list_sort()
will call the comparison callback with the same element twice, causing
a deadlock in vgic_irq_cmp().
H_PUT_TCE_INDIRECT handlers receive a page with up to 512 TCEs from
a guest. Although we verify correctness of TCEs before we do anything
with the existing tables, there is a small window when a check in
kvmppc_tce_validate might pass and right after that the guest alters
the page of TCEs, causing an early exit from the handler and leaving
srcu_read_lock(&vcpu->kvm->srcu) (virtual mode) or lock_rmap(rmap)
(real mode) locked.
This fixes the bug by jumping to the common exit code with an appropriate
unlock.
Commit 9392bd98bba760be96ee ("tools/power turbostat: Add support for AMD
Fam 17h (Zen) RAPL") add a function get_tdp_amd(), the parameter is CPU
family. But the rapl_probe_amd() function use wrong model parameter.
Fix the wrong caller parameter of get_tdp_amd() to use family.
Cc: <stable@vger.kernel.org> # v5.1+ Signed-off-by: Pu Wen <puwen@hygon.cn> Reviewed-by: Calvin Walton <calvin.walton@kepstin.ca> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The option named "auto_delink_en" is a bit misleading, as setting it to
false doesn't really disable auto-delink but let auto-delink be firmware
controlled.
Update the description to reflect the real usage of this parameter.
This patch fixes an issue that the following error is
possible to happen when ohci hardware causes an interruption
and the system is shutting down at the same time.
ohci_shutdown() disables all the interrupt and rh_state is set to
OHCI_RH_HALTED. In other hand, ohci_irq() is possible to enable
OHCI_INTR_SF and OHCI_INTR_MIE on ohci_irq(). Note that OHCI_INTR_SF
is possible to be set by start_ed_unlink() which is called:
ohci_irq()
-> process_done_list()
-> takeback_td()
-> start_ed_unlink()
So, ohci_irq() has the following condition, the issue happens by
&ohci->regs->intrenable = OHCI_INTR_MIE | OHCI_INTR_SF and
ohci->rh_state = OHCI_RH_HALTED:
/* interrupt for some other device? */
if (ints == 0 || unlikely(ohci->rh_state == OHCI_RH_HALTED))
return IRQ_NOTMINE;
To fix the issue, ohci_shutdown() holds the spin lock while disabling
the interruption and changing the rh_state flag to prevent reenable
the OHCI_INTR_MIE unexpectedly. Note that io_watchdog_func() also
calls the ohci_shutdown() and it already held the spin lock, so that
the patch makes a new function as _ohci_shutdown().
This patch is inspired by a Renesas R-Car Gen3 BSP patch
from Tho Vu.
After _gadget_stop_activity is executed, we can consider the hardware
operation for gadget has finished, and the udc can be stopped and enter
low power mode. So, any later hardware operations (from usb_ep_ops APIs
or usb_gadget_ops APIs) should be considered invalid, any deinitializatons
has been covered at _gadget_stop_activity.
I meet this problem when I plug out usb cable from PC using mass_storage
gadget, my callstack like: vbus interrupt->.vbus_session->
composite_disconnect ->pm_runtime_put_sync(&_gadget->dev),
the composite_disconnect will call fsg_disable, but fsg_disable calls
usb_ep_disable using async way, there are register accesses for
usb_ep_disable. So sometimes, I get system hang due to visit register
without clock, sometimes not.
The Linux Kernel USB maintainer Alan Stern suggests this kinds of solution.
See: http://marc.info/?l=linux-usb&m=138541769810983&w=2.
Using managed device resources in usb_hcd_pci_probe() allows devm usage for
resource subranges, such as the mmio resource for the platform device
created to control host/device mode mux, which is a xhci extended
capability, and sits inside the xhci mmio region.
If managed device resources are not used then "parent" resource
is released before subrange at driver removal as .remove callback is
called before the devres list of resources for this device is walked
and released.
This has been observed with the xhci extended capability driver causing a
use-after-free which is now fixed.
An additional nice benefit is that error handling on driver initialisation
is simplified much.
In case of a disconnect an ongoing flush() has to be made fail.
Nevertheless we cannot be sure that any pending URB has already
finished, so although they will never succeed, they still must
not be touched.
The clean solution for this is to check for WDM_IN_USE
and WDM_DISCONNECTED in flush(). There is no point in ever
clearing WDM_IN_USE, as no further writes make sense.
The race between adding a function probe and reading the probes that exist
is very subtle. It needs a comment. Also, the issue can also happen if the
probe has has the EMPTY_HASH as its func_hash.
Cc: stable@vger.kernel.org Fixes: 7b60f3d876156 ("ftrace: Dynamically create the probe ftrace_ops for the trace_array") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In register_ftrace_function_probe(), we are not checking the return
value of alloc_and_copy_ftrace_hash(). The subsequent call to
ftrace_match_records() may end up dereferencing the same. Add a check to
ensure this doesn't happen.
The test (ftrace_set_ftrace_filter.sh) is part of ftrace stress tests
and the crash happens when the test does 'cat
$TRACING_PATH/set_ftrace_filter'.
The address points to the second line below, in t_probe_next(), where
filter_hash is dereferenced:
hash = iter->probe->ops.func_hash->filter_hash;
size = 1 << hash->size_bits;
This happens due to a race with register_ftrace_function_probe(). A new
ftrace_func_probe is created and added into the func_probes list in
trace_array under ftrace_lock. However, before initializing the filter,
we drop ftrace_lock, and re-acquire it after acquiring regex_lock. If
another process is trying to read set_ftrace_filter, it will be able to
acquire ftrace_lock during this window and it will end up seeing a NULL
filter_hash.
Fix this by just checking for a NULL filter_hash in t_probe_next(). If
the filter_hash is NULL, then this probe is just being added and we can
simply return from here.
The G700 suffers from the same issue than the G502:
when plugging it in, the driver tries to contact it but it fails.
This timeout is problematic as it introduce a delay in the boot,
and having only the mouse event node means that the hardware
macros keys can not be relayed to the userspace.
Link: https://github.com/libratbag/libratbag/issues/797 Fixes: 91cf9a98ae41 ("HID: logitech-hidpp: make .probe usbhid capable") Cc: stable@vger.kernel.org # v5.2 Reviewed-by: Filipe Laíns <lains@archlinux.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Although APIC initialization will typically clear out the LDR before
setting it, the APIC cleanup code should reset the LDR.
This was discovered with a 32-bit KVM guest jumping into a kdump
kernel. The stale bits in the LDR triggered a bug in the KVM APIC
implementation which caused the destination mapping for VCPUs to be
corrupted.
Note that this isn't intended to paper over the KVM APIC bug. The kernel
has to clear the LDR when resetting the APIC registers except when X2APIC
is enabled.
This lacks a Fixes tag because missing to clear LDR goes way back into pre
git history.
[ tglx: Made x2apic_enabled a function call as required ]
Signed-off-by: Bandan Das <bsd@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190826101513.5080-3-bsd@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Legacy apic init uses bigsmp for smp systems with 8 and more CPUs. The
bigsmp APIC implementation uses physical destination mode, but it
nevertheless initializes LDR and DFR. The LDR even ends up incorrectly with
multiple bit being set.
This does not cause a functional problem because LDR and DFR are ignored
when physical destination mode is active, but it triggered a problem on a
32-bit KVM guest which jumps into a kdump kernel.
The multiple bits set unearthed a bug in the KVM APIC implementation. The
code which creates the logical destination map for VCPUs ignores the
disabled state of the APIC and ends up overwriting an existing valid entry
and as a result, APIC calibration hangs in the guest during kdump
initialization.
Remove the bogus LDR/DFR initialization.
This is not intended to work around the KVM APIC bug. The LDR/DFR
ininitalization is wrong on its own.
The issue goes back into the pre git history. The fixes tag is the commit
in the bitkeeper import which introduced bigsmp support in 2003.
ftrace does not use text_poke() for enabling trace functionality. It uses
its own mechanism and flips the whole kernel text to RW and back to RO.
The CPA rework removed a loop based check of 4k pages which tried to
preserve a large page by checking each 4k page whether the change would
actually cover all pages in the large page.
This resulted in endless loops for nothing as in testing it turned out that
it actually never preserved anything. Of course testing missed to include
ftrace, which is the one and only case which benefitted from the 4k loop.
As a consequence enabling function tracing or ftrace based kprobes results
in a full 4k split of the kernel text, which affects iTLB performance.
The kernel RO protection is the only valid case where this can actually
preserve large pages.
All other static protections (RO data, data NX, PCI, BIOS) are truly
static. So a conflict with those protections which results in a split
should only ever happen when a change of memory next to a protected region
is attempted. But these conflicts are rightfully splitting the large page
to preserve the protected regions. In fact a change to the protected
regions itself is a bug and is warned about.
Add an exception for the static protection check for kernel text RO when
the to be changed region spawns a full large page which allows to preserve
the large mappings. This also prevents the syslog to be spammed about CPA
violations when ftrace is used.
The exception needs to be removed once ftrace switched over to text_poke()
which avoids the whole issue.
Fixes: 585948f4f695 ("x86/mm/cpa: Avoid the 4k pages check completely") Reported-by: Song Liu <songliubraving@fb.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Song Liu <songliubraving@fb.com> Reviewed-by: Song Liu <songliubraving@fb.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1908282355340.1938@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
32-bit processes running on a 64-bit kernel are not always detected
correctly, causing the process to crash when uretprobes are installed.
The reason for the crash is that in_ia32_syscall() is used to determine the
process's mode, which only works correctly when called from a syscall.
In the case of uretprobes, however, the function is called from a exception
and always returns 'false' on a 64-bit kernel. In consequence this leads to
corruption of the process's return address.
Fix this by using user_64bit_mode() instead of in_ia32_syscall(), which
is correct in any situation.
[ tglx: Add a comment and the following historical info ]
This should have been detected by the rename which happened in commit
abfb9498ee13 ("x86/entry: Rename is_{ia32,x32}_task() to in_{ia32,x32}_syscall()")
which states in the changelog:
The is_ia32_task()/is_x32_task() function names are a big misnomer: they
suggests that the compat-ness of a system call is a task property, which
is not true, the compatness of a system call purely depends on how it
was invoked through the system call layer.
.....
and then it went and blindly renamed every call site.
Sadly enough this was already mentioned here:
8faaed1b9f50 ("uprobes/x86: Introduce sizeof_long(), cleanup adjust_ret_addr() and
arch_uretprobe_hijack_return_addr()")
where the changelog says:
TODO: is_ia32_task() is not what we actually want, TS_COMPAT does
not necessarily mean 32bit. Fortunately syscall-like insns can't be
probed so it actually works, but it would be better to rename and
use is_ia32_frame().
and goes all the way back to:
0326f5a94dde ("uprobes/core: Handle breakpoint and singlestep exceptions")
Oh well. 7+ years until someone actually tried a uretprobe on a 32bit
process on a 64bit kernel....
Don't advance RIP or inject a single-step #DB if emulation signals a
fault. This logic applies to all state updates that are conditional on
clean retirement of the emulation instruction, e.g. updating RFLAGS was
previously handled by commit 38827dbd3fb85 ("KVM: x86: Do not update
EFLAGS on faulting emulation").
Not advancing RIP is likely a nop, i.e. ctxt->eip isn't updated with
ctxt->_eip until emulation "retires" anyways. Skipping #DB injection
fixes a bug reported by Andy Lutomirski where a #UD on SYSCALL due to
invalid state with EFLAGS.TF=1 would loop indefinitely due to emulation
overwriting the #UD with #DB and thus restarting the bad SYSCALL over
and over.
Cc: Nadav Amit <nadav.amit@gmail.com> Cc: stable@vger.kernel.org Reported-by: Andy Lutomirski <luto@kernel.org> Fixes: 663f4c61b803 ("KVM: x86: handle singlestep during emulation") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If kvm_intel is loaded with nested=0 parameter an attempt to perform
KVM_GET_SUPPORTED_HV_CPUID results in OOPS as nested_get_evmcs_version hook
in kvm_x86_ops is NULL (we assign it in nested_vmx_hardware_setup() and
this only happens in case nested is enabled).
Check that kvm_x86_ops->nested_get_evmcs_version is not NULL before
calling it. With this, we can remove the stub from svm as it is no
longer needed.
recalculate_apic_map does not santize ldr and it's possible that
multiple bits are set. In that case, a previous valid entry
can potentially be overwritten by an invalid one.
This condition is hit when booting a 32 bit, >8 CPU, RHEL6 guest and then
triggering a crash to boot a kdump kernel. This is the sequence of
events:
1. Linux boots in bigsmp mode and enables PhysFlat, however, it still
writes to the LDR which probably will never be used.
2. However, when booting into kdump, the stale LDR values remain as
they are not cleared by the guest and there isn't a apic reset.
3. kdump boots with 1 cpu, and uses Logical Destination Mode but the
logical map has been overwritten and points to an inactive vcpu.
Signed-off-by: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Bandan Das <bsd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The quirk function snd_emuusb_set_samplerate() has a NULL check for
the mixer element, but this is useless in the current code. It used
to be a check against mixer->id_elems[unitid] but it was changed later
to the value after mixer_eleme_list_to_info() which is always non-NULL
due to the container_of() usage.
This patch fixes the check before the conversion.
While we're at it, correct a typo in the comment in the function,
too.
Fixes: 8c558076c740 ("ALSA: usb-audio: Clean up mixer element list traverse") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The input pool of a client might be deleted via the resize ioctl, the
the access to it should be covered by the proper locks. Currently the
only missing place is the call in snd_seq_ioctl_get_client_pool(), and
this patch papers over it.
"enabled" parameter historically referred to the device input or
output, not to the led indicator. After the changes added with the led
helper functions the mic mute led logic refers to the led and not to
the mic input which caused led indicator to be negated.
Fixing logic in cxt_update_gpio_led and updated
cxt_fixup_gpio_mute_hook
Also updated debug messages to ease further debugging if necessary.
Fixes: 184e302b46c9 ("ALSA: hda/conexant - Use the mic-mute LED helper") Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jeronimo Borque <jeronimo@borque.com.ar> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I forgot to release the allocated object at the early error path in
line6_init_pcm(). For addressing it, slightly shuffle the code so
that the PCM destructor (pcm->private_free) is assigned properly
before all error paths.
The bmControls (for UAC1) or bmMixerControls (for UAC2/3) bitmap has a
variable size depending on both input and output pins. Its size is to
fit with input * output bits. The problem is that the input size
can't be determined simply from the unit descriptor itself but it
needs to parse the whole connected sources. Although the
uac_mixer_unit_get_channels() tries to check some possible overflow of
this bitmap, it's incomplete due to the lack of the evaluation of
input pins.
For covering possible overflows, this patch adds the bitmap overflow
check in the loop of input pins in parse_audio_mixer_unit().
Fixes: 0bfe5e434e66 ("ALSA: usb-audio: Check mixer unit descriptors more strictly") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In decode_session{4,6} there is a possibility that the skb dst dev is NULL,
e,g, with tunnel collect_md mode, which will cause kernel crash.
Here is what the code path looks like, for GRE:
The reason is __metadata_dst_init() init dst->dev to NULL by default.
We could not fix it in __metadata_dst_init() as there is no dev supplied.
On the other hand, the skb_dst(skb)->dev is actually not needed as we
called decode_session{4,6} via xfrm_decode_session_reverse(), so oif is not
used by: fl4->flowi4_oif = reverse ? skb->skb_iif : oif;
So make a dst dev check here should be clean and safe.
v4: No changes.
v3: No changes.
v2: fix the issue in decode_session{4,6} instead of updating shared dst dev
in {ip_md, ip6}_tunnel_xmit.
Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Tested-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In __icmp_send() there is a possibility that the rt->dst.dev is NULL,
e,g, with tunnel collect_md mode, which will cause kernel crash.
Here is what the code path looks like, for GRE:
- ip6gre_tunnel_xmit
- ip6gre_xmit_ipv4
- __gre6_xmit
- ip6_tnl_xmit
- if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE
- icmp_send
- net = dev_net(rt->dst.dev); <-- here
The reason is __metadata_dst_init() init dst->dev to NULL by default.
We could not fix it in __metadata_dst_init() as there is no dev supplied.
On the other hand, the reason we need rt->dst.dev is to get the net.
So we can just try get it from skb->dev when rt->dst.dev is NULL.
v4: Julian Anastasov remind skb->dev also could be NULL. We'd better
still use dst.dev and do a check to avoid crash.
v3: No changes.
v2: fix the issue in __icmp_send() instead of updating shared dst dev
in {ip_md, ip6}_tunnel_xmit.
Fixes: c8b34e680a09 ("ip_tunnel: Add tnl_update_pmtu in ip_md_tunnel_xmit") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Julian Anastasov <ja@ssi.bg> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch addresses a conntrack cache issue with timeout policy.
Currently, we do not check if the timeout extension is set properly in the
cached conntrack entry. Thus, after packet recirculate from conntrack
action, the timeout policy is not applied properly. This patch fixes the
aforementioned issue.
Fixes: 06bd2bdf19d2 ("openvswitch: Add timeout support to ct action") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using mpls over gre/gre6 setup, rt->rt_gw4 address is not set, the
same for rt->rt_gw_family. Therefore, when rt->rt_gw_family is checked
in mpls_xmit(), neigh_xmit() call is skipped. As a result, such setup
doesn't work anymore.
This issue was found with LTP mpls03 tests.
Fixes: 1550c171935d ("ipv4: Prepare rtable for IPv6 gateway") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As Jason Baron explained in commit 790ba4566c1a ("tcp: set SOCK_NOSPACE
under memory pressure"), it is crucial we properly set SOCK_NOSPACE
when needed.
However, Jason patch had a bug, because the 'nonblocking' status
as far as sk_stream_wait_memory() is concerned is governed
by MSG_DONTWAIT flag passed at sendmsg() time :
long timeo = sock_sndtimeo(sk, flags & MSG_DONTWAIT);
So it is very possible that tcp sendmsg() calls sk_stream_wait_memory(),
and that sk_stream_wait_memory() returns -EAGAIN with SOCK_NOSPACE
cleared, if sk->sk_sndtimeo has been set to a small (but not zero)
value.
This patch removes the 'noblock' variable since we must always
set SOCK_NOSPACE if -EAGAIN is returned.
It also renames the do_nonblock label since we might reach this
code path even if we were in blocking mode.
Fixes: 790ba4566c1a ("tcp: set SOCK_NOSPACE under memory pressure") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jason Baron <jbaron@akamai.com> Reported-by: Vladimir Rutsky <rutsky@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Jason Baron <jbaron@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, we are only explicitly setting SOCK_NOSPACE on a write timeout
for non-blocking sockets. Epoll() edge-trigger mode relies on SOCK_NOSPACE
being set when -EAGAIN is returned to ensure that EPOLLOUT is raised.
Expand the setting of SOCK_NOSPACE to non-blocking sockets as well that can
use SO_SNDTIMEO to adjust their write timeout. This mirrors the behavior
that Eric Dumazet introduced for tcp sockets.
Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Ursula Braun <ubraun@linux.ibm.com> Cc: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In certain cases when the probe function fails the error path calls
cpsw_remove_dt() before calling platform_set_drvdata(). This is an
issue as cpsw_remove_dt() uses platform_get_drvdata() to retrieve the
cpsw_common data and leds to a NULL pointer exception. This patches
fixes it by calling platform_set_drvdata() earlier in the probe.
Fixes: 83a8471ba255 ("net: ethernet: ti: cpsw: refactor probe to group common hw initialization") Reported-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefano Brivio [Mon, 12 Aug 2019 22:46:01 +0000 (00:46 +0200)]
ipv6: Fix return value of ipv6_mc_may_pull() for malformed packets
Commit ba5ea614622d ("bridge: simplify ip_mc_check_igmp() and
ipv6_mc_check_mld() calls") replaces direct calls to pskb_may_pull()
in br_ipv6_multicast_mld2_report() with calls to ipv6_mc_may_pull(),
that returns -EINVAL on buffers too short to be valid IPv6 packets,
while maintaining the previous handling of the return code.
This leads to the direct opposite of the intended effect: if the
packet is malformed, -EINVAL evaluates as true, and we'll happily
proceed with the processing.
Return 0 if the packet is too short, in the same way as this was
fixed for IPv4 by commit 083b78a9ed64 ("ip: fix ip_mc_may_pull()
return value").
I don't have a reproducer for this, unlike the one referred to by
the IPv4 commit, but this is clearly broken.
Fixes: ba5ea614622d ("bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() calls") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>