The following warning from the refcount framework is seen during ghes
initialization:
EDAC MC0: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT)
------------[ cut here ]------------
refcount_t: increment on 0; use-after-free.
WARNING: CPU: 36 PID: 1 at lib/refcount.c:156 refcount_inc_checked
[...]
Call trace:
refcount_inc_checked
ghes_edac_register
ghes_probe
...
It warns if the refcount is incremented from zero. This warning is
reasonable as a kernel object is typically created with a refcount of
one and freed once the refcount is zero. Afterwards the object would be
"used-after-free".
For GHES, the refcount is initialized with zero, and that is why this
message is seen when initializing the first instance. However, whenever
the refcount is zero, the device will be allocated and registered. Since
the ghes_reg_mutex protects the refcount and serializes allocation and
freeing of ghes devices, a use-after-free cannot happen here.
Instead of using refcount_inc() for the first instance, use
refcount_set(). This can be used here because the refcount is zero at
this point and can not change due to its protection by the mutex.
Fixes: 23f61b9fc5cc ("EDAC/ghes: Fix locking and memory barrier issues") Reported-by: John Garry <john.garry@huawei.com> Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: John Garry <john.garry@huawei.com> Cc: <huangming23@huawei.com> Cc: James Morse <james.morse@arm.com> Cc: <linuxarm@huawei.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: <tanxiaofei@huawei.com> Cc: Tony Luck <tony.luck@intel.com> Cc: <wanghuiqiang@huawei.com> Link: https://lkml.kernel.org/r/20191121213628.21244-1-rrichter@marvell.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit e3a5d8e386c3 ("check bi_size overflow before merge") adds a bio_full
check to __bio_try_merge_page. This will cause __bio_try_merge_page to fail
when the last bi_io_vec has been reached. Instead, what we want here is only
the bi_size overflow check.
Fixes: e3a5d8e386c3 ("block: check bi_size overflow before merge") Cc: stable@vger.kernel.org # v5.4+ Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
As it was found recently, the Performance Monitoring Unit (PMU) on the
Allwinner A64 SoC was not generating (the right) interrupts. With the
SPI numbers from the manual the kernel did not receive any overflow
interrupts, so perf was not happy at all.
It turns out that the numbers were just off by 4, so the PMU interrupts
are from 148 to 151, not from 152 to 155 as the manual describes.
This was found by playing around with U-Boot, which typically does not
use interrupts, so the GIC is fully available for experimentation:
With *every* PPI and SPI enabled, an overflowing PMU cycle counter was
found to set a bit in one of the GICD_ISPENDR registers, with careful
counting this was determined to be number 148.
Tested with perf record and perf top on a Pine64-LTS. Also tested with
tasksetting to every core to confirm the assignment between IRQs and
cores.
This somewhat "revert-fixes" commit ed3e9406bcbc ("arm64: dts: allwinner:
a64: Drop PMU node").
Fixes: 34a97fcc71c2 ("arm64: dts: allwinner: a64: Add PMU node") Fixes: ed3e9406bcbc ("arm64: dts: allwinner: a64: Drop PMU node") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Sasha Levin <sashal@kernel.org>
xdr_shrink_pagelen() BUG's when @len is larger than buf->page_len.
This can happen when xdr_buf_read_mic() is given an xdr_buf with
a small page array (like, only a few bytes).
Instead, just cap the number of bytes that xdr_shrink_pagelen()
will move.
Fixes: 5f1bc39979d ("SUNRPC: Fix buffer handling of GSS MIC ... ") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a port sends PLOGI, discovery state should be changed to login
pending, otherwise RELOGIN_NEEDED bit is set in
qla24xx_handle_plogi_done_event(). RELOGIN_NEEDED triggers another PLOGI,
and it never goes out of the loop until login timer expires.
Fixes: 8777e4314d397 ("scsi: qla2xxx: Migrate NVME N2N handling into state machine") Fixes: 8b5292bcfcacf ("scsi: qla2xxx: Fix Relogin to prevent modifying scan_state flag") Cc: Quinn Tran <qutran@marvell.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191125165702.1013-6-r.bolshakov@yadro.com Acked-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
With commit 6ce220dd2f8ea71d6afc29b9a7524c12e39f374a ("raid5: don't set
STRIPE_HANDLE to stripe which is in batch list"), we don't want to set
STRIPE_HANDLE flag for sh which is already in batch list.
However, the stripe which is the head of batch list should set this flag,
otherwise panic could happen inside init_stripe at BUG_ON(sh->batch_head),
it is reproducible with raid5 on top of nvdimm devices per Xiao oberserved.
Thanks for Xiao's effort to verify the change.
Fixes: 6ce220dd2f8ea ("raid5: don't set STRIPE_HANDLE to stripe which is in batch list") Reported-by: Xiao Ni <xni@redhat.com> Tested-by: Xiao Ni <xni@redhat.com> Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
8962842ca5ab ("blk-mq: avoid sysfs buffer overflow with too many CPU cores")
avoids sysfs buffer overflow, and reserves one character for line break.
However, the last snprintf() doesn't get correct 'size' parameter passed
in, so fixed it.
Fixes: 8962842ca5ab ("blk-mq: avoid sysfs buffer overflow with too many CPU cores") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No need to wait for any commit once the page is fully truncated.
Besides, it may confuse e.g. concurrent ext4_writepage() with the page
still be dirty (will be cleared by truncate_pagecache() in
ext4_setattr()) but buffers has been freed; and then trigger a bug
show as below:
And the bug will be triggered once we seen the below order.
reproduce1 reproduce2
... | ...
truncate to 4k |
change to journal data mode |
| memcpy(set page dirty)
truncate to 0: |
ext4_setattr: |
... |
ext4_wait_for_tail_page_commit |
| mbind(trigger bug)
truncate_pagecache(clean dirty)| ...
... |
mbind will call ext4_writepage() since the page still be dirty, and then
report the bug since the buffers has been free. Fix it by return
directly once offset equals to 0 which means the page has been fully
truncated.
Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: yangerkun <yangerkun@huawei.com> Link: https://lore.kernel.org/r/20190919063508.1045-1-yangerkun@huawei.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Grünbacher reports that on the two filesystems that support
iomap directio, it's possible for splice() to return -EAGAIN (instead of
a short splice) if the pipe being written to has less space available in
its pipe buffers than the length supplied by the calling process.
Months ago we fixed splice_direct_to_actor to clamp the length of the
read request to the size of the splice pipe. Do the same to do_splice.
Fixes: 17614445576b6 ("splice: don't read more than available pipe space") Reported-by: syzbot+3c01db6025f26530cf8d@syzkaller.appspotmail.com Reported-by: Andreas Grünbacher <andreas.gruenbacher@gmail.com> Reviewed-by: Andreas Grünbacher <andreas.gruenbacher@gmail.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When setting the time in the future with the uie timer enabled,
rtc_timer_do_work will loop for a while because the expiration of the uie
timer was way before the current RTC time and a new timer will be enqueued
until the current rtc time is reached.
If the uie timer is enabled, disable it before setting the time and enable
it after expiring current timers (which may actually be an alarm).
This is the safest thing to do to ensure the uie timer is still
synchronized with the RTC, especially in the UIE emulation case.
Reported-by: syzbot+08116743f8ad6f9a6de7@syzkaller.appspotmail.com Fixes: 6610e0893b8b ("RTC: Rework RTC code to use timerqueue for events") Link: https://lore.kernel.org/r/20191020231320.8191-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The KASLR offset is added to vmcoreinfo in arch_crash_save_vmcoreinfo(),
so that it can be found by crash when processing kernel dumps.
However, arch_crash_save_vmcoreinfo() is called during a subsys_initcall,
so if the kernel crashes before that, we have no vmcoreinfo and no KASLR
offset.
Fix this by storing the KASLR offset in the lowcore, where the vmcore_info
pointer will be stored, and where it can be found by crash. In order to
make it distinguishable from a real vmcore_info pointer, mark it as uneven
(KASLR offset itself is aligned to THREAD_SIZE).
When arch_crash_save_vmcoreinfo() stores the real vmcore_info pointer in
the lowcore, it overwrites the KASLR offset. At that point, the KASLR
offset is not yet added to vmcoreinfo, so we also need to move the
mem_assign_absolute() behind the vmcoreinfo_append_str().
Fixes: b2d24b97b2a9 ("s390/kernel: add support for kernel address space layout randomization (KASLR)") Cc: <stable@vger.kernel.org> # v5.2+ Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a secondary CPU is brought up it must initialize its control
registers. CPU A which triggers that a secondary CPU B is brought up
stores its control register contents into the lowcore of new CPU B,
which then loads these values on startup.
This is problematic in various ways: the control register which
contains the home space ASCE will correctly contain the kernel ASCE;
however control registers for primary and secondary ASCEs are
initialized with whatever values were present in CPU A.
Typically:
- the primary ASCE will contain the user process ASCE of the process
that triggered onlining of CPU B.
- the secondary ASCE will contain the percpu VDSO ASCE of CPU A.
Due to lazy ASCE handling we may also end up with other combinations.
When then CPU B switches to a different process (!= idle) it will
fixup the primary ASCE. However the problem is that the (wrong) ASCE
from CPU A was loaded into control register 1: as soon as an ASCE is
attached (aka loaded) a CPU is free to generate TLB entries using that
address space.
Even though it is very unlikey that CPU B will actually generate such
entries, this could result in TLB entries of the address space of the
process that ran on CPU A. These entries shouldn't exist at all and
could cause problems later on.
Furthermore the secondary ASCE of CPU B will not be updated correctly.
This means that processes may see wrong results or even crash if they
access VDSO data on CPU B. The correct VDSO ASCE will eventually be
loaded on return to user space as soon as the kernel executed a call
to strnlen_user or an atomic futex operation on CPU B.
Fix both issues by intializing the to be loaded control register
contents with the correct ASCEs and also enforce (re-)loading of the
ASCEs upon first context switch and return to user space.
Fixes: 0aaba41b58bc ("s390: remove all code using the access register mode") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'a0' member of 'struct arm_smccc_res' is declared as 'unsigned long',
however the Qualcomm SCM firmware interface driver expects to receive
negative error codes via this field, so ensure that it's cast to 'long'
before comparing to see if it is less than 0.
If the file system is corrupted such that a file's i_links_count is
too small, then it's possible that when unlinking that file, i_nlink
will already be zero. Previously we were working around this kind of
corruption by forcing i_nlink to one; but we were doing this before
trying to delete the directory entry --- and if the file system is
corrupted enough that ext4_delete_entry() fails, then we exit with
i_nlink elevated, and this causes the orphan inode list handling to be
FUBAR'ed, such that when we unmount the file system, the orphan inode
list can get corrupted.
A better way to fix this is to simply skip trying to call drop_nlink()
if i_nlink is already zero, thus moving the check to the place where
it makes the most sense.
The problem occurs because kmem_cache_destroy() is called immediately
after deleting of a memcg, so it races with the memcg kmem_cache
deactivation.
flush_memcg_workqueue() at the beginning of kmem_cache_destroy() is
supposed to guarantee that all deactivation processes are finished, but
failed to do so. It waits for an rcu grace period, after which all
children kmem_caches should be deactivated. During the deactivation
percpu_ref_kill() is called for non root kmem_cache refcounters, but it
requires yet another rcu grace period to finish the transition to the
atomic (dead) state.
So in a rare case when not all children kmem_caches are destroyed at the
moment when the root kmem_cache is about to be gone, we need to wait
another rcu grace period before destroying the root kmem_cache.
This issue can be triggered only with dynamically created kmem_caches
which are used with memcg accounting. In this case per-memcg child
kmem_caches are created. They are deactivated from the cgroup removing
path. If the destruction of the root kmem_cache is racing with the
removal of the cgroup (both are quite complicated multi-stage
processes), the described issue can occur. The only known way to
trigger it in the real life, is to unload some kernel module which
creates a dedicated kmem_cache, used from different memory cgroups with
GFP_ACCOUNT flag. If the unloading happens immediately after calling
rmdir on the corresponding cgroup, there is some chance to trigger the
issue.
Link: http://lkml.kernel.org/r/20191129025011.3076017-1-guro@fb.com Fixes: f0a3a24b532d ("mm: memcg/slab: rework non-root kmem_cache lifecycle management") Signed-off-by: Roman Gushchin <guro@fb.com> Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Rockchip PMIC driver can automatically detect connected component
versions by reading the ID_MSB and ID_LSB registers. The probe function
will always fail with RK818 PMICs because the ID_MSK is 0xFFF0 and the
RK818 template ID is 0x8181.
This patch changes this value to 0x8180.
Fixes: 9d6105e19f61 ("mfd: rk808: Fix up the chip id get failed") Cc: stable@vger.kernel.org Cc: Elaine Zhang <zhangqing@rock-chips.com> Cc: Joseph Chen <chenjh@rock-chips.com> Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
F_SEAL_FUTURE_WRITE has unexpected behavior when used with MAP_PRIVATE:
A private mapping created after the memfd file that gets sealed with
F_SEAL_FUTURE_WRITE loses the copy-on-write at fork behavior, meaning
children and parent share the same memory, even though the mapping is
private.
if (info->seals & F_SEAL_FUTURE_WRITE) {
/*
* New PROT_WRITE and MAP_SHARED mmaps are not allowed when
* "future write" seal active.
*/
if ((vma->vm_flags & VM_SHARED) && (vma->vm_flags & VM_WRITE))
return -EPERM;
/*
* Since the F_SEAL_FUTURE_WRITE seals allow for a MAP_SHARED
* read-only mapping, take care to not allow mprotect to revert
* protections.
*/
vma->vm_flags &= ~(VM_MAYWRITE);
}
...
}
And for the mm to know if a mapping is copy-on-write:
The patch fixes the issue by making the mprotect revert protection
happen only for shared mappings. For private mappings, using mprotect
will have no effect on the seal behavior.
The F_SEAL_FUTURE_WRITE feature was introduced in v5.1 so v5.3.x stable
kernels would need a backport.
[akpm@linux-foundation.org: reflow comment, per Christoph] Link: http://lkml.kernel.org/r/20191107195355.80608-1-joel@joelfernandes.org Fixes: ab3948f58ff84 ("mm/memfd: add an F_SEAL_FUTURE_WRITE seal to memfd") Signed-off-by: Nicolas Geoffray <ngeoffray@google.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clock_getres in the vDSO library has to preserve the same behaviour
of posix_get_hrtimer_res().
In particular, posix_get_hrtimer_res() does:
sec = 0;
ns = hrtimer_resolution;
and hrtimer_resolution depends on the enablement of the high
resolution timers that can happen either at compile or at run time.
Fix the powerpc vdso implementation of clock_getres keeping a copy of
hrtimer_resolution in vdso data and using that directly.
Fixes: a7f290dad32e ("[PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel") Cc: stable@vger.kernel.org Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Shuah Khan <skhan@linuxfoundation.org>
[chleroy: changed CLOCK_REALTIME_RES to CLOCK_HRTIMER_RES] Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a55eca3a5e85233838c2349783bcb5164dae1d09.1575273217.git.christophe.leroy@c-s.fr Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit aea447141c7e ("powerpc: Disable -Wbuiltin-requires-header when
setjmp is used") disabled -Wbuiltin-requires-header because of a
warning about the setjmp and longjmp declarations.
r367387 in clang added another diagnostic around this, complaining
that there is no jmp_buf declaration.
In file included from ../arch/powerpc/xmon/xmon.c:47:
../arch/powerpc/include/asm/setjmp.h:10:13: error: declaration of
built-in function 'setjmp' requires the declaration of the 'jmp_buf'
type, commonly provided in the header <setjmp.h>.
[-Werror,-Wincomplete-setjmp-declaration]
extern long setjmp(long *);
^
../arch/powerpc/include/asm/setjmp.h:11:13: error: declaration of
built-in function 'longjmp' requires the declaration of the 'jmp_buf'
type, commonly provided in the header <setjmp.h>.
[-Werror,-Wincomplete-setjmp-declaration]
extern void longjmp(long *, long);
^
2 errors generated.
We are not using the standard library's longjmp/setjmp implementations
for obvious reasons; make this clear to clang by using -ffreestanding
on these files.
With a wl1251 child node of mmc3 in the device tree decoded
in omap_hsmmc.c to handle special wl1251 initialization, we do
no longer need to instantiate the mmc3 through pdata quirks.
We also can remove the wlan regulator and reset/interrupt definitions
and do them through device tree.
Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: <stable@vger.kernel.org> # v4.7+ Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This partly reverts the commit efdfeb079cc3 ("regulator: fixed: Convert to
use GPIO descriptor only").
We must remove this from mainline first, so that the following patch
to remove the openpandora quirks for mmc3 and wl1251 cleanly applies
to stable v4.9, v4.14, v4.19 where the above mentioned patch is not yet
present.
Since the code affected is removed (no pandora gpios in pdata-quirks
and more), there will be no matching revert-of-the-revert.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Each time we need to read a sample (from the sysfs interface, since the
driver supports only it) the driver writes the configuration register
with the proper settings needed to perform the said read, then it runs
another xfer to actually read the resulting value. Most notably the
configuration register is updated to set the ADC internal MUX depending by
which channel the read targets.
Unfortunately this seems not enough to ensure correct operation because
the ADC works in a pipelined-like fashion and the new configuration isn't
applied in time.
The ADC alternates two phases: acquisition and conversion. During the
acquisition phase the ADC samples the analog signal in an internal
capacitor; in the conversion phase the ADC performs the actual analog to
digital conversion of the stored voltage. Note that of course the MUX
needs to be set to the proper channel when the acquisition phase is
performed.
Once the conversion phase has been completed, the device automatically
switches back to a new acquisition; on the other hand the device switches
from acquisition to conversion on the rising edge of SPI cs signal (that
is when the xfer finishes).
Only after both two phases have been completed (with the proper settings
already written in the configuration register since the beginning) it is
possible to read the outcome from SPI bus.
With the current driver implementation, we end up in the following
situation:
As shown in the diagram above, the value we read in the Nth read belongs
to configuration setting N-1.
In case the configuration is not changed (config[N] == config[N-1]), then
we still get correct data, but in case the configuration changes (i.e.
switching the MUX on another channel), we get wrong data (data from the
previously selected channel).
This patch fixes this by performing one more "dummy" transfer in order to
ending up in reading the data when it's really ready, as per the following
timing diagram.
NOTE: in the latter case (cfg changes), the acquisition phase for the
value to be read begins after the 1st xfer, that is after the read request
has been issued on sysfs. On the other hand, if the cfg doesn't change,
then we can refer to the fist diagram assuming N == (N - 1); the
acquisition phase _begins_ before the 1st xfer (potentially a lot of time
before the read has been issued via sysfs, but it _ends_ after the 1st
xfer, that is _after_ the read has started. This should guarantee a
reasonably fresh data, which value represents the voltage that the sampled
signal has after the read start or maybe just around it.
Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Reviewed-by: Charles-Antoine Couret <charles-antoine.couret@essensium.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The device could be configured to spit out also the configuration word
while reading the AD result value (in the same SPI xfer) - this is called
"readback" in the device datasheet.
The driver checks if readback is enabled and it eventually adjusts the SPI
xfer length and it applies proper shifts to still get the data, discarding
the configuration word.
The readback option is actually never enabled (the driver disables it), so
the said checks do not serve for any purpose.
Since enabling the readback option seems not to provide any advantage (the
driver entirely sets the configuration word without relying on any default
value), just kill the said, unused, code.
Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since st_lsm6dsx i2c master controller relies on accel device as trigger
and slave devices can run at different ODRs we must select an accel_odr >=
slave_odr. Report real accel ODR in st_lsm6dsx_check_odr() in order to
properly set sensor frequency in st_lsm6dsx_write_raw and avoid to
report unsupported frequency
Move sensor odr table in st_lsm6dsx_sensor_settings in order to support
sensors with different odr maps. This is a preliminary patch to add
support for LSM9DS1 sensor to st_lsm6dsx driver
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Current code assumes abort will remove the original command from the active
list where scsi_done will not be called. Instead, the eh_abort thread will
do the scsi_done. That is not the case. Instead, we have a double
scsi_done calls triggering use after free.
Abort will tell FW to release the command from FW possesion. The original
command will return to ULP with error in its normal fashion via scsi_done.
eh_abort path would wait for the original command completion before
returning. eh_abort path will not perform the scsi_done call.
Fixes: 219d27d7147e0 ("scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands") Cc: stable@vger.kernel.org # 5.2 Link: https://lore.kernel.org/r/20191105150657.8092-6-hmadhani@marvell.com Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Instead of allocating a struct srb dynamically from inside .queuecommand(),
set qla2xxx_driver_template.cmd_size such that struct scsi_cmnd and struct
srb are contiguous. Do not call QLA_QPAIR_MARK_BUSY() /
QLA_QPAIR_MARK_NOT_BUSY() for SRBs associated with SCSI commands. That is
safe because scsi_remove_host() is called before queue pairs are deleted
and scsi_remove_host() waits for all outstanding SCSI commands to finish.
Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch was found to introduce a double free regression. The issue
it originally attempted to address was fixed in patch f45bca8c5052 ("scsi: qla2xxx: Fix double scsi_done for abort path").
when GPSC/GPDB switch command fails, driver just returns without doing a
proper cleanup. This patch fixes this memory leak by calling sp->free() in
the error path.
Link: https://lore.kernel.org/r/20191105150657.8092-4-hmadhani@marvell.com Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On fast cable pull, where driver is unable to detect device has disappeared
and came back based on switch info, qla2xxx would not re-login while remote
port has already invalidated the session. This causes IO timeout. This
patch would relogin to remote device for RSCN affected port.
Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Link: https://lore.kernel.org/r/20190830222402.23688-6-hmadhani@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Login session was stucked on cable pull. When FW is in the middle PRLI
PENDING + driver is in Initiator mode, driver fails to check back with FW to
see if the PRLI has completed. This patch would re-check with FW again to
make sure PRLI would complete before pushing forward with relogin.
Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Link: https://lore.kernel.org/r/20190830222402.23688-5-hmadhani@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch updates log message which indicates number of vectors used by
the driver instead of displaying failure to get maximum requested
vectors. Driver will always request maximum vectors during
initialization. In the event driver is not able to get maximum requested
vectors, it will adjust the allocated vectors. This is normal and does not
imply failure in driver.
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Link: https://lore.kernel.org/r/20190830222402.23688-2-hmadhani@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In qla2x00_alloc_fw_dump(), an existing EFT buffer (e.g. from previous
invocation of qla2x00_alloc_offload_mem()) is freed. The buffer is then
re-allocated, but without setting the eft and eft_dma fields to the new
values.
Fixes: a28d9e4ef997 ("scsi: qla2xxx: Add support for multiple fwdump templates/segments") Cc: Joe Carnuccio <joe.carnuccio@cavium.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin Wilck <mwilck@suse.com> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The LIO core requires that the target driver callback functions
.queue_data_in() and .queue_status() call target_put_sess_cmd() or
transport_generic_free_cmd(). These calls may happen synchronously or
asynchronously. Make sure that one of these LIO functions is called in case
a command has been aborted. This patch avoids that the code for removing a
session hangs due to commands that do not make progress.
Cc: Himanshu Madhani <hmadhani@marvell.com> Fixes: 694833ee00c4 ("scsi: tcm_qla2xxx: Do not allow aborted cmd to advance.") # v4.13. Fixes: a07100e00ac4 ("qla2xxx: Fix TMR ABORT interaction issue between qla2xxx and TCM") # v4.5. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Set the r??_data_len variables before using these instead of after.
This patch fixes the following Coverity complaint:
const: At condition req_data_len != rsp_data_len, the value of req_data_len
must be equal to 0.
const: At condition req_data_len != rsp_data_len, the value of rsp_data_len
must be equal to 0.
dead_error_condition: The condition req_data_len != rsp_data_len cannot be
true.
Cc: Himanshu Madhani <hmadhani@marvell.com> Fixes: a9b6f722f62d ("[SCSI] qla2xxx: Implementation of bidirectional.") # v3.7. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The following sequence of event leads to NVME port disappearing:
- device port shut
- nvme_fc_unregister_remoteport
- device port online
- remote port delete completes
- relogin is scheduled
- "post gidpn" message appears due to rscn generation # mismatch
In short, if a device comes back online sooner than an unregister
completion, a mismatch in rscn generation number occurs, which is not
handled correctly during device relogin. Fix this by starting with a redo
of GNL.
When ql2xextended_error_logging is enabled, the re-plugged device's
discovery stops with the following messages printed:
With debug kernel we see following wanings indicating memory leak.
[28809.523959] WARNING: CPU: 3 PID: 6790 at lib/dma-debug.c:978
dma_debug_device_change+0x166/0x1d0
[28809.523964] pci 0000:0c:00.6: DMA-API: device driver has pending DMA
allocations while released from device [count=5]
[28809.523964] One of leaked entries details: [device
address=0x00000002aefe4000] [size=8208 bytes] [mapped with DMA_BIDIRECTIONAL]
[mapped as coherent]
Fix this by unmapping DMA memory.
Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
For any qla2xxx async command, the SRB buffer is used to send it. In
setting up the SRB buffer, the timer for this command is started before all
memory allocation has finished. Under low memory pressure, memory alloc
can go to sleep and not wake up before the timer expires. Once timer has
expired, the timer thread will access uninitialize fields resulting into
NULL pointer crash.
This patch fixes this crash by moving the start of timer after everything
is setup.
On switch, fabric and mgt command timeout, driver send Abort to tell FW to
return the original command. If abort is timeout, then return both Abort
and original command for cleanup.
Fixes: 219d27d7147e0 ("scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands") Cc: stable@vger.kernel.org # 5.2 Link: https://lore.kernel.org/r/20191105150657.8092-3-hmadhani@marvell.com Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If an abort times out, the Abort IOCB completion and Abort timer can race
against each other. This patch provides unique error code for timer path to
allow proper cleanup.
[mkp: typo]
Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Crash was caused by a bad ndlp address passed to I/O indicated by the XRI
aborted CQE. The address was not NULL so the routine deferenced the ndlp
ptr. The bad ndlp also caused the lpfc_sli4_io_xri_aborted to call an
erroneous io handler. Root cause for the bad ndlp was an lpfc_ncmd that
was aborted, put on the abort_io list, completed, taken off the abort_io
list, sent to lpfc_release_nvme_buf where it was put back on the abort_io
list because the lpfc_ncmd->flags setting LPFC_SBUF_XBUSY was not cleared
on the final completion.
Rework the exchange busy handling to ensure the flags are properly set for
both scsi and nvme.
Fixes: c490850a0947 ("scsi: lpfc: Adapt partitioned XRI lists to efficient sharing") Cc: <stable@vger.kernel.org> # v5.1+ Link: https://lore.kernel.org/r/20191018211832.7917-6-jsmart2021@gmail.com Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since commit d0a5b995a308 (vfs: Add IOP_XATTR inode operations flag)
extended attributes haven't worked on the root directory in reiserfs.
This is due to reiserfs conditionally setting the sb->s_xattrs handler
array depending on whether it located or create the internal privroot
directory. It necessarily does this after the root inode is already
read in. The IOP_XATTR flag is set during inode initialization, so
it never gets set on the root directory.
This commit unconditionally assigns sb->s_xattrs and clears IOP_XATTR on
internal inodes. The old return values due to the conditional assignment
are handled via open_xa_root, which now returns EOPNOTSUPP as the VFS
would have done.
Link: https://lore.kernel.org/r/20191024143127.17509-1-jeffm@suse.com CC: stable@vger.kernel.org Fixes: d0a5b995a308 ("vfs: Add IOP_XATTR inode operations flag") Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Estimate for the number of credits needed for final freeing of inode in
ext4_evict_inode() was to small. We may modify 4 blocks (inode & sb for
orphan deletion, bitmap & group descriptor for inode freeing) and not
just 3.
There is a race window where quota was redirted once we drop dq_list_lock inside dqput(),
but before we grab dquot->dq_lock inside dquot_release()
TASK1 TASK2 (chowner)
->dqput()
we_slept:
spin_lock(&dq_list_lock)
if (dquot_dirty(dquot)) {
spin_unlock(&dq_list_lock);
dquot->dq_sb->dq_op->write_dquot(dquot);
goto we_slept
if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) {
spin_unlock(&dq_list_lock);
dquot->dq_sb->dq_op->release_dquot(dquot);
dqget()
mark_dquot_dirty()
dqput()
goto we_slept;
}
So dquot dirty quota will be released by TASK1, but on next we_sleept loop
we detect this and call ->write_dquot() for it.
XFSTEST: https://github.com/dmonakhov/xfstests/commit/440a80d4cbb39e9234df4d7240aee1d551c36107
The PCI INTx interrupts and other LSI interrupts are handled differently
under a sPAPR platform. When the interrupt source characteristics are
queried, the hypervisor returns an H_INT_ESB flag to inform the OS
that it should be using the H_INT_ESB hcall for interrupt management
and not loads and stores on the interrupt ESB pages.
A default -1 value is returned for the addresses of the ESB pages. The
driver ignores this condition today and performs a bogus IO mapping.
Recent changes and the DEBUG_VM configuration option make the bug
visible with :
When the machine crash handler is invoked, all interrupts are masked
but interrupts which have not been started yet do not have an ESB page
mapped in the Linux address space. This crashes the 'crash kexec'
sequence on sPAPR guests.
To fix, force the mapping of the ESB page when an interrupt is being
mapped in the Linux IRQ number space. This is done by setting the
initial state of the interrupt to OFF which is not necessarily the
case on PowerNV.
Fixes: 243e25112d06 ("powerpc/xive: Native exploitation of the XIVE interrupt controller") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191031063100.3864-1-clg@kaod.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calling __kernel_sync_dicache with a size >4GB, we were masking
off the upper 32 bits, so we would incorrectly flush a range smaller
than intended.
This patch replaces the 32 bit shifts with 64 bit ones, so that
the full size is accounted for.
When tracing etm data of multiple threads on multiple cpus through perf
interface, some link devices are shared between paths of different cpus.
It creates race conditions when different cpus wants to enable/disable
the same link device at the same time.
Example 1:
Two cpus want to enable different ports of a coresight funnel, thus
calling the funnel enable operation at the same time. But the funnel
enable operation isn't reentrantable.
Example 2:
For an enabled coresight dynamic replicator with refcnt=1, one cpu wants
to disable it, while another cpu wants to enable it. Ideally we still have
an enabled replicator with refcnt=1 at the end. But in reality the result
is uncertain.
Since coresight devices claim themselves when enabled for self-hosted
usage, the race conditions above usually make the link devices not usable
after many cycles.
To fix the race conditions, this patch uses spinlocks to serialize
enabling/disabling link devices.
Commit c7fd62bc69d02 ("stm class: Introduce framing protocol drivers")
forgot to tear down the link between an stm device and its protocol
driver when policy is removed. This leads to an invalid pointer reference
if one tries to write to an stm device after the policy has been removed
and the protocol driver module unloaded, leading to the below splat:
If dev->dma_device->params == NULL then the maximum DMA segment size is 64
KB. See also the dma_get_max_seg_size() implementation. This patch fixes
the following kernel warning:
The MMC card detection GPIO polarity is active low on TAO3530, like in many
other similar boards. Now the card is not detected and it is unable to
mount rootfs from an SD card.
Fix this by using the correct polarity.
This incorrect polarity was defined already in the commit 30d95c6d7092
("ARM: dts: omap3: Add Technexion TAO3530 SOM omap3-tao3530.dtsi") in v3.18
kernel and later changed to use defined GPIO constants in v4.4 kernel by
the commit 3a637e008e54 ("ARM: dts: Use defined GPIO constants in flags
cell for OMAP2+ boards").
While the latter commit did not introduce the issue I'm marking it with
Fixes tag due the v4.4 kernels still being maintained.
Fixes: 3a637e008e54 ("ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards") Cc: linux-stable <stable@vger.kernel.org> # 4.4+ Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pandora_wl1251_init_card was used to do special pdata based
setup of the sdio mmc interface. This does no longer work with
v4.7 and later. A fix requires a device tree based mmc3 setup.
Therefore we move the special setup to omap_hsmmc.c instead
of calling some pdata supplied init_card function.
The new code checks for a DT child node compatible to wl1251
so it will not affect other MMC3 use cases.
Generally, this code was and still is a hack and should be
moved to mmc core to e.g. read such properties from optional
DT child nodes.
Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: <stable@vger.kernel.org> # v4.7+
[Ulf: Fixed up some checkpatch complaints] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In s3c64xx_eint_eint0_init() the for_each_child_of_node() loop is used
with a break to find a matching child node. Although each iteration of
for_each_child_of_node puts the previous node, but early exit from loop
misses it. This leads to leak of device node.
Several functions use for_each_child_of_node() loop with a break to find
a matching child node. Although each iteration of
for_each_child_of_node puts the previous node, but early exit from loop
misses it. This leads to leak of device node.
In s3c24xx_eint_init() the for_each_child_of_node() loop is used with a
break to find a matching child node. Although each iteration of
for_each_child_of_node puts the previous node, but early exit from loop
misses it. This leads to leak of device node.
In exynos_eint_wkup_init() the for_each_child_of_node() loop is used
with a break to find a matching child node. Although each iteration of
for_each_child_of_node puts the previous node, but early exit from loop
misses it. This leads to leak of device node.
Cc: <stable@vger.kernel.org> Fixes: 43b169db1841 ("pinctrl: add exynos4210 specific extensions for samsung pinctrl driver") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Each iteration of for_each_child_of_node puts the previous node, but in
the case of a return from the middle of the loop, there is no put, thus
causing a memory leak. Hence add an of_node_put before the return of
exynos_eint_wkup_init() error path.
Issue found with Coccinelle.
As explained in the following commit a9a1a4833613 ("pinctrl:
armada-37xx: Fix gpio interrupt setup") the armada_37xx_irq_set_type()
function can be called before the initialization of the mask field.
That means that we can't use this field in this function and need to
workaround it using hwirq.
Fixes: 30ac0d3b0702 ("pinctrl: armada-37xx: Add edge both type gpio irq support") Cc: stable@vger.kernel.org Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20191115155752.2562-1-gregory.clement@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Certain ACPI-enumerated devices represented as platform devices in
Linux, like fans, require special low-level power management handling
implemented by their drivers that is not in agreement with the ACPI
PM domain behavior. That leads to problems with managing ACPI fans
during system-wide suspend and resume.
For this reason, make acpi_dev_pm_attach() skip the affected devices
by adding a list of device IDs to avoid to it and putting the IDs of
the affected devices into that list.
Fixes: e5cc8ef31267 (ACPI / PM: Provide ACPI PM callback routines for subsystems) Reported-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com> Cc: 3.10+ <stable@vger.kernel.org> # 3.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In i2c_acpi_remove_space_handler(), a leak occurs whenever the
"data" parameter is initialized to 0 before being passed to
acpi_bus_get_private_data().
This is because the NULL pointer check in acpi_bus_get_private_data()
(condition->if(!*data)) returns EINVAL and, in consequence, memory is
never freed in i2c_acpi_remove_space_handler().
Fix the NULL pointer check in acpi_bus_get_private_data() to follow
the analogous check in acpi_get_data_full().
Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
[ rjw: Subject & changelog ] Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
acpi_os_map_cleanup checks map->refcount outside of acpi_ioremap_lock
before freeing the map. This creates a race condition the can result
in the map being freed more than once.
A panic can be caused by running
for ((i=0; i<10; i++))
do
for ((j=0; j<100000; j++))
do
cat /sys/firmware/acpi/tables/data/BERT >/dev/null
done &
done
This patch makes sure that only the process that drops the reference
to 0 does the freeing.
Fixes: b7c1fadd6c2e ("ACPI: Do not use krefs under a mutex in osl.c") Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Valerio and others reported that commit 84c8b58ed3ad ("ACPI / hotplug /
PCI: Don't scan bridges managed by native hotplug") prevents some recent
LG and HP laptops from booting with endless loop of:
ACPI Error: No handler or method for GPE 08, disabling event (20190215/evgpe-835)
ACPI Error: No handler or method for GPE 09, disabling event (20190215/evgpe-835)
ACPI Error: No handler or method for GPE 0A, disabling event (20190215/evgpe-835)
...
What seems to happen is that during boot, after the initial PCI enumeration
when EC is enabled the platform triggers ACPI Notify() to one of the root
ports. The root port itself looks like this:
The BIOS has configured the root port so that it does not have I/O bridge
window.
Now when the ACPI Notify() is triggered ACPI hotplug handler calls
acpiphp_native_scan_bridge() for each non-hotplug bridge (as this system is
using native PCIe hotplug) and pci_assign_unassigned_bridge_resources() to
allocate resources.
The device connected to the root port is a PCIe switch (Thunderbolt
controller) with two hotplug downstream ports. Because of the hotplug ports
__pci_bus_size_bridges() tries to add "additional I/O" of 256 bytes to each
(DEFAULT_HOTPLUG_IO_SIZE). This gets further aligned to 4k as that's the
minimum I/O window size so each hotplug port gets 4k I/O window and the
same happens for the root port (which is also hotplug port). This means
3 * 4k = 12k I/O window.
Because of this pci_assign_unassigned_bridge_resources() ends up opening a
I/O bridge window for the root port at first available I/O address which
seems to be in range 0x1000 - 0x3fff. Normally this range is used for ACPI
stuff such as GPE bits (below is part of /proc/ioports):
However, when the ACPI Notify() happened this range was not yet reserved
for ACPI/PNP (that happens later) so PCI gets it. It then starts writing to
this range and accidentally stomps over GPE bits among other things causing
the endless stream of messages about missing GPE handler.
This problem does not happen if "pci=hpiosize=0" is passed in the kernel
command line. The reason is that then the kernel does not try to allocate
the additional 256 bytes for each hotplug port.
Fix this by allocating resources directly below the non-hotplug bridges
where a new device may appear as a result of ACPI Notify(). This avoids the
hotplug bridges and prevents opening the additional I/O window.
The iGPU / GFX0 device's _PS0 method on the ASUS T200TA depends on the
I2C1 controller (which is connected to the embedded controller). But unlike
in the T100TA/T100CHI this dependency is not listed in the _DEP of the GFX0
device.
This results in the dev_WARN_ONCE(..., "Transfer while suspended\n") call
in i2c-designware-master.c triggering and the AML code not working as it
should.
This commit fixes this by adding a dmi based quirk mechanism for devices
which miss a _DEP, and adding a quirk for the LNXVIDEO depending on the
I2C1 device on the Asus T200TA.
Fixes: 2d71ee0ce72f ("ACPI / LPSS: Add a device link from the GPU to the BYT I2C5 controller") Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: 4.20+ <stable@vger.kernel.org> # 4.20+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Various Asus Bay Trail devices (T100TA, T100CHI, T200TA) have an embedded
controller connected to I2C1 and the iGPU (LNXVIDEO) _PS0/_PS3 methods
access it, so we need to add a consumer link from LNXVIDEO to I2C1 on
these devices to avoid suspend/resume ordering problems.
Fixes: 2d71ee0ce72f ("ACPI / LPSS: Add a device link from the GPU to the BYT I2C5 controller") Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: 4.20+ <stable@vger.kernel.org> # 4.20+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
So far on Bay Trail (BYT) we only have been adding a device_link adding
the iGPU (LNXVIDEO) device as consumer for the I2C controller for the
PMIC for I2C5, but the PMIC only uses I2C5 on BYT CR (cost reduced) on
regular BYT platforms I2C7 is used and we were not adding the device_link
sometimes causing resume ordering issues.
This commit adds LNXVIDEO -> BYT I2C7 to the lpss_device_links table,
fixing this.
Fixes: 2d71ee0ce72f ("ACPI / LPSS: Add a device link from the GPU to the BYT I2C5 controller") Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: 4.20+ <stable@vger.kernel.org> # 4.20+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following build warning occurred on powerpc 64-bit builds:
drivers/cpufreq/powernv-cpufreq.c: In function 'init_chip_info':
drivers/cpufreq/powernv-cpufreq.c:1070:1: warning: the frame size of
1040 bytes is larger than 1024 bytes [-Wframe-larger-than=]
This is with a cross-compiler based on gcc 8.1.0, which I got from:
https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/
The warning is due to putting 1024 bytes on the stack:
unsigned int chip[256];
...and it's also undesirable to have a hard limit on the number of
CPUs here.
Fix both problems by dynamically allocating based on num_possible_cpus,
as recommended by Michael Ellerman.
Fixes: 053819e0bf840 ("cpufreq: powernv: Handle throttling due to Pmax capping at chip level") Signed-off-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.10+ <stable@vger.kernel.org> # 4.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no locking in this sysfs show function so stats printing can
race with a devfreq_update_status called as part of freq switching or
with initialization.
Also add an assert in devfreq_update_status to make it clear that lock
must be held by caller.
Commit a753bfcfdb1f ("intel_th: Make the switch allocate its subdevices")
factored out intel_th_subdevice_alloc() from intel_th_populate(), but got
the error path wrong, resulting in two instances of a double put_device()
on a freshly initialized, but not 'added' device.
Fix this by only doing one put_device() in the error path.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: a753bfcfdb1f ("intel_th: Make the switch allocate its subdevices") Reported-by: Wen Yang <wenyang@linux.alibaba.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org # v4.14+ Link: https://lore.kernel.org/r/20191120130806.44028-2-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a root user or a user with CAP_SYS_ADMIN privilege uses any
trace_imc performance monitoring unit events, to monitor application
or KVM threads, it may result in a checkstop (System crash).
The cause is frequent switching of the "trace/accumulation" mode of
the In-Memory Collection hardware (LDBAR).
This patch disables the trace_imc PMU unit entirely to avoid
triggering the checkstop. A future patch will reenable it at a later
stage once a workaround has been developed.
Fixes: 012ae244845f ("powerpc/perf: Trace imc PMU functions") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Tested-by: Hariharan T.S. <hari@linux.ibm.com>
[mpe: Add pr_info_once() so dmesg shows the PMU has been disabled] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191118034452.9939-1-maddy@linux.vnet.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As David reported [1], ENODATA returns when attempting
to modify files by using EROFS as an overlayfs lower layer.
The root cause is that listxattr could return unexpected
-ENODATA by mistake for inodes without xattr. That breaks
listxattr return value convention and it can cause copy
up failure when used with overlayfs.
Resolve by zeroing out if no xattr is found for listxattr.
The TEO governor uses idle duration "bins" defined in accordance with
the CPU idle states table provided by the driver, so that each "bin"
covers the idle duration range between the target residency of the
idle state corresponding to it and the target residency of the closest
deeper idle state. The governor collects statistics for each bin
regardless of whether or not the idle state corresponding to it is
currently enabled.
In particular, the "early hits" metric measures the likelihood of a
situation in which the idle duration measured after wakeup falls into
to given bin, but the time till the next timer (sleep length) falls
into a bin corresponding to one of the deeper idle states. It is
used when the "hits" and "misses" metrics indicate that the state
"matching" the sleep length should not be selected, so that the state
with the maximum "early hits" value is selected instead of it.
If the idle state corresponding to the given bin is disabled, it
cannot be selected and if it turns out to be the one that should be
selected, a shallower idle state needs to be used instead of it.
Nevertheless, the metrics collected for the bin corresponding to it
are still valid and need to be taken into account as though that
state had not been disabled.
As far as the "early hits" metric is concerned, teo_select() tries to
take disabled states into account, but the state index corresponding
to the maximum "early hits" value computed by it may be incorrect.
Namely, it always uses the index of the previous maximum "early hits"
state then, but there may be enabled idle states closer to the
disabled one in question. In particular, if the current candidate
state (whose index is the idx value) is closer to the disabled one
and the "early hits" value of the disabled state is greater than the
current maximum, the index of the current candidate state (idx)
should replace the "maximum early hits state" index.
Modify the code to handle that case correctly.
Fixes: b26bf6ab716f ("cpuidle: New timer events oriented governor for tickless systems") Reported-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 5.1+ <stable@vger.kernel.org> # 5.1+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The TEO governor uses idle duration "bins" defined in accordance with
the CPU idle states table provided by the driver, so that each "bin"
covers the idle duration range between the target residency of the
idle state corresponding to it and the target residency of the closest
deeper idle state. The governor collects statistics for each bin
regardless of whether or not the idle state corresponding to it is
currently enabled.
In particular, the "hits" and "misses" metrics measure the likelihood
of a situation in which both the time till the next timer (sleep
length) and the idle duration measured after wakeup fall into the
given bin. Namely, if the "hits" value is greater than the "misses"
one, that situation is more likely than the one in which the sleep
length falls into the given bin, but the idle duration measured after
wakeup falls into a bin corresponding to one of the shallower idle
states.
If the idle state corresponding to the given bin is disabled, it
cannot be selected and if it turns out to be the one that should be
selected, a shallower idle state needs to be used instead of it.
Nevertheless, the metrics collected for the bin corresponding to it
are still valid and need to be taken into account as though that
state had not been disabled.
For this reason, make teo_select() always use the "hits" and "misses"
values of the idle duration range that the sleep length falls into
even if the specific idle state corresponding to it is disabled and
if the "hits" values is greater than the "misses" one, select the
closest enabled shallower idle state in that case.
Fixes: b26bf6ab716f ("cpuidle: New timer events oriented governor for tickless systems") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 5.1+ <stable@vger.kernel.org> # 5.1+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / linux-stable / log