The return value of hga_card_detect() is not properly handled causing
the probe to succeed even though hga_card_detect() failed. Since probe
succeeds, hgafb_open() can be called which will end up operating on an
unmapped hga_vram. This results in an out-of-bounds access as reported
by kernel test robot [1].
To fix this, correctly detect failure of hga_card_detect() by checking
for a non-zero error code.
ext4 didn't properly clean up if verity failed to be enabled on a file:
- It left verity metadata (pages past EOF) in the page cache, which
would be exposed to userspace if the file was later extended.
- It didn't truncate the verity metadata at all (either from cache or
from disk) if an error occurred while setting the verity bit.
Fix these bugs by adding a call to truncate_inode_pages() and ensuring
that we truncate the verity metadata (both from cache and from disk) in
all error paths. Also rework the code to cleanly separate the success
path from the error paths, which makes it much easier to understand.
nvme_init_identify and thus nvme_mpath_init can be called multiple
times and thus must not overwrite potentially initialized or in-use
fields. Split out a helper for the basic initialization when the
controller is initialized and make sure the init_identify path does
not blindly change in-use data structures.
Fixes: 0d0b660f214d ("nvme: add ANA support") Reported-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot is reporting OOB write at vga16fb_imageblit() [1], for
resize_screen() from ioctl(VT_RESIZE) returns 0 without checking whether
requested rows/columns fit the amount of memory reserved for the graphical
screen if current mode is KD_GRAPHICS.
Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter
which is the number of pixel rows per character (cell) rather than the
height of the font used.
For framebuffer devices the two values are always the same, because the
former is inferred from the latter one. For VGA used as a true text
mode device these two parameters are independent from each other: the
number of pixel rows per character is set in the CRT controller, while
font height is in fact hardwired to 32 pixel rows and fonts of heights
below that value are handled by padding their data with blanks when
loaded to hardware for use by the character generator. One can change
the setting in the CRT controller and it will update the screen contents
accordingly regardless of the font loaded.
The `v_clin' parameter is used by the `vgacon' driver to set the height
of the character cell and then the cursor position within. Make the
parameter explicit then, by defining a new `vc_cell_height' struct
member of `vc_data', set it instead of `vc_font.height' from `v_clin' in
the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver
except where actual font data is accessed which as noted above is
independent from the CRTC setting.
This way the framebuffer console driver is free to ignore the `v_clin'
parameter as irrelevant, as it always should have, avoiding any issues
attempts to give the parameter a meaning there could have caused, such
as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX
behave like VT_RESIZE"):
"syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2],
for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height
larger than actual font height calculated by con_font_set() from
ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates
minimal amount of memory based on actual font height calculated by
con_font_set(), use of vt_resizex() can cause UAF/OOB read for font
data."
The problem first appeared around Linux 2.5.66 which predates our repo
history, but the origin could be identified with the old MIPS/Linux repo
also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git>
as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX
code in `vt_ioctl' was updated as follows:
if (clin)
- video_font_height = clin;
+ vc->vc_font.height = clin;
making the parameter apply to framebuffer devices as well, perhaps due
to the use of "font" in the name of the original `video_font_height'
variable. Use "cell" in the new struct member then to avoid ambiguity.
Fix an issue with VGA console font size changes made after the initial
video text mode has been changed with a user tool like `svgatextmode'
calling the VT_RESIZEX ioctl. As it stands in that case the original
screen geometry continues being used to validate further VT resizing.
Consequently when the video adapter is firstly reprogrammed from the
original say 80x25 text mode using a 9x16 character cell (720x400 pixel
resolution) to say 80x37 text mode and the same character cell (720x592
pixel resolution), and secondly the CRTC character cell updated to 9x8
(by loading a suitable font with the KD_FONT_OP_SET request of the
KDFONTOP ioctl), the VT geometry does not get further updated from 80x37
and only upper half of the screen is used for the VT, with the lower
half showing rubbish corresponding to whatever happens to be there in
the video memory that maps to that part of the screen. Of course the
proportions change according to text mode geometries and font sizes
chosen.
Address the problem then, by updating the text mode geometry defaults
rather than checking against them whenever the VT is resized via a user
ioctl.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: e400b6ec4ede ("vt/vgacon: Check if screen resize request comes from userspace") Cc: stable@vger.kernel.org # v2.6.24+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function qlcnic_dl_lb_test() currently calls netdev_alloc_skb()
without checking afterwards that the allocation succeeded. Fix this by
checking if the skb is NULL and returning an error in such a case.
Breaking out of the loop if the skb is NULL is not correct as no error
would be reported to the caller and no message would be printed for the
user.
Check return value of lp5xx_read and if non-zero, jump to code at end of
the function, causing lp5523_stop_all_engines to be executed before
returning the error value up the call chain. This fixes the original
commit (248b57015f35) which was reverted due to the University of Minnesota
problems.
In commit b05ae01fdb89, someone tried to make the driver handle i2c read
errors by simply zeroing out the register contents, but for some reason
left unaltered the code that sets the cached register value the function
call return value.
The original patch was authored by a member of the Underhanded
Mangle-happy Nerds, I'm not terribly surprised. I don't have the
hardware anymore so I can't test this, but it seems like a pretty
obvious API usage fix to me...
Fixes: b05ae01fdb89 ("misc/ics932s401: Add a missing check to i2c_smbus_read_word_data") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20210428222534.GJ3122264@magnolia Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If alloc_workqueue() fails, properly catch this and propagate the error
to the calling functions, so that the devuce initialization will
properly error out.
Move ufshcd_set_variant call in ufs_hisi_init_common to common error
section at end of the function, and then jump to this from the error
checking statements for both devm_reset_control_get and
ufs_hisi_get_resource. This fixes the original commit (63a06181d7ce)
which was reverted due to the University of Minnesota problems.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Link: https://lore.kernel.org/r/20210503115736.2104747-32-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case clk_prepare() fails, capture and propagate the error code up the
stack. If regulator_enable() was called earlier, properly unwind it by
calling regulator_disable().
niu_pci_eeprom_read() may fail, so add checks to its return value and
propagate the error up the callstack.
An examination of the callstack up to niu_pci_eeprom_read shows that:
niu_pci_eeprom_read() // returns int
niu_pci_vpd_scan_props() // returns int
niu_pci_vpd_fetch() // returns *void*
niu_get_invariants() // returns int
since niu_pci_vpd_fetch() returns void which breaks the bubbling up,
change its return type to int so that error is propagated upwards.
Signed-off-by: Du Cheng <ducheng2@gmail.com> Cc: Shannon Nelson <shannon.lee.nelson@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-24-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The change here was incorrect. While it is nice to check if
niu_pci_eeprom_read() succeeded or not when using the data, any error
that might have happened was not propagated upwards properly, causing
the kernel to assume that these reads were successful, which results in
invalid data in the buffer that was to contain the successfully read
data.
Cc: Kangjie Lu <kjlu@umn.edu> Cc: Shannon Nelson <shannon.lee.nelson@gmail.com> Cc: David S. Miller <davem@davemloft.net> Fixes: 26fd962bde0b ("niu: fix missing checks of niu_pci_eeprom_read") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-23-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
This commit does not properly detect if an error happens because the
logic after this loop will not detect that there was a failed
allocation.
Cc: Aditya Pakki <pakki001@umn.edu> Cc: David S. Miller <davem@davemloft.net> Fixes: 5bf7295fe34a ("qlcnic: Avoid potential NULL pointer dereference") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-25-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
This commit is not correct, it should not have used unlikely() and is
not propagating the error properly to the calling function, so it should
be reverted at this point in time. Also, if the check failed, the
work queue was still assumed to be allocated, so further accesses would
have continued to fail, meaning this patch does nothing to solve the
root issues at all.
Cc: Kangjie Lu <kjlu@umn.edu> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Bryan Brattlof <hello@bryanbrattlof.com> Fixes: 765976285a8c ("rtlwifi: fix a potential NULL pointer dereference") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-13-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, it was determined that this commit is not needed at all as
the media core already prevents memory disclosure on this codepath, so
just drop the extra memset happening here.
As Peter points out, if we were to disconnect and then reconnect this
driver from a device, the "global" state of the device would contain odd
values and could cause problems. Fix this up by just initializing the
whole thing to 0 at probe() time.
Ideally this would be a per-device variable, but given the age and the
total lack of users of it, that would require a lot of s/./->/g changes
for really no good reason.
Reported-by: Peter Rosin <peda@axentia.se> Cc: Jens Axboe <axboe@kernel.dk> Reviewed-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/YJP2j6AU82MqEY2M@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fields, "toc" and "cd_info", of "struct gdrom_unit gd" are allocated
in "probe_gdrom()". Prevent a memory leak by making sure "gd.cd_info" is
deallocated in the "remove_gdrom()" function.
Also prevent double free of the field "gd.toc" by moving it from the
module's exit function to "remove_gdrom()". This is because, in
"probe_gdrom()", the function makes sure to deallocate "gd.toc" in case
of any errors, so the exit function invoked later would again free
"gd.toc".
The patch also maintains consistency by deallocating the above mentioned
fields in "remove_gdrom()" along with another memory allocated field
"gd.disk".
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
Because of this, all submissions from this group must be reverted from
the kernel tree and will need to be re-reviewed again to determine if
they actually are a valid fix. Until that work is complete, remove this
change to ensure that no problems are being introduced into the
codebase.
Cc: Wenwen Wang <wang6495@umn.edu> Cc: Peter Rosin <peda@axentia.se> Cc: Jens Axboe <axboe@kernel.dk> Fixes: 093c48213ee3 ("gdrom: fix a memory leak bug") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-27-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit is incorrect, it does not properly clean up on the
error path, so I'll keep the revert and fix it up properly with a
follow-on patch.
Cc: Kangjie Lu <kjlu@umn.edu> Cc: Avri Altman <avri.altman@wdc.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Fixes: 63a06181d7ce ("scsi: ufs: fix a missing check of devm_reset_control_get") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-31-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit log for this change was incorrect, no "error
handling code" was added, things will blow up just as badly as before if
any of these cases ever were true. As this BUG_ON() never fired, and
most of these checks are "obviously" never going to be true, let's just
revert to the original code for now until this gets unwound to be done
correctly in the future.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit here, while technically correct, did not fully
handle all of the reported issues that the commit stated it was fixing,
so revert it until it can be "fixed" fully.
Note, ioremap() probably will never fail for old hardware like this, and
if anyone actually used this hardware (a PowerMac era PCI display card),
they would not be using fbdev anymore.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, it was determined that this commit is not needed at all so
just revert it. Also, the call to lm80_init_client() was not properly
handled, so if error handling is needed in the lm80_probe() function,
then it should be done properly, not half-baked like the commit being
reverted here did.
Cc: Kangjie Lu <kjlu@umn.edu> Fixes: 9aa3aa15f4c2 ("hwmon: (lm80) fix a missing check of bus read in lm80 probe") Cc: stable <stable@vger.kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210503115736.2104747-5-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit does not properly unwind if there is an error
condition so it needs to be reverted at this point in time.
Cc: Kangjie Lu <kjlu@umn.edu> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: stable <stable@vger.kernel.org> Fixes: 248b57015f35 ("leds: lp5523: fix a missing check of return value of lp55xx_read") Link: https://lore.kernel.org/r/20210503115736.2104747-9-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit causes a memory leak when it is trying to claim it
is properly handling errors. Revert this change and fix it up properly
in a follow-on commit.
Cc: Kangjie Lu <kjlu@umn.edu> Cc: David S. Miller <davem@davemloft.net> Fixes: f86a3b83833e ("net: stmicro: fix a missing check of clk_prepare") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-21-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
This patch "looks" correct, but the driver keeps on running and will
fail horribly right afterward if this error condition ever trips.
So points for trying to resolve an issue, but a huge NEGATIVE value for
providing a "fake" fix for the problem as nothing actually got resolved
at all. I'll go fix this up properly...
modprobe brd rd_size=1048576
dmsetup create o --table "0 `blockdev --getsize /dev/ram0` snapshot-origin /dev/ram0"
dmsetup create s --table "0 `blockdev --getsize /dev/ram0` snapshot /dev/ram0 /dev/ram1 N 0"
The reason is that when we test for zero chunk size, we jump to the label
bad_read_metadata without setting the "r" variable. The function
snapshot_ctr destroys all the structures and then exits with "r == 0". The
kernel then crashes because it falsely believes that snapshot_ctr
succeeded.
In order to fix the bug, we set the variable "r" to -EINVAL.
When multiple PCI devices get assigned to a guest right at boot, libxl
incrementally populates the backend tree. The writes for the first of
the devices trigger the backend watch. In turn xen_pcibk_setup_backend()
will set the XenBus state to Initialised, at which point no further
reconfigures would happen unless a device got hotplugged. Arrange for
reconfigure to also get triggered from the backend watch handler.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/2337cbd6-94b9-4187-9862-c03ea12e0c61@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Inserting an SD-card on an Intel NUC10i3FNK4 (which contains a GL9755)
results in the message:
mmc0: 1.8V regulator output did not become stable
Following this message, some cards work (sometimes), but most cards fail
with EILSEQ. This behaviour is observed on Debian 10 running kernel
4.19.188, but also with 5.8.18 and 5.11.15.
The driver currently waits 5ms after switching on the 1.8V regulator for
it to become stable. Increasing this to 10ms gets rid of the warning
about stability, but most cards still fail. Increasing it to 20ms gets
some cards working (a 32GB Samsung micro SD works, a 128GB ADATA
doesn't). At 50ms, the ADATA works most of the time, and at 100ms both
cards work reliably.
There is problem with 3DCGCG firmware and it will cause compute test
hang on picasso/raven1. It needs to disable 3DCGCG in driver to avoid
compute hang.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be not be needed at all as the
change was useless because this function can only be called when
of_match_device matched on something. So it should be reverted.
In case create_workqueue() fails, release all resources and return -ENOMEM
to caller to avoid potential NULL pointer deref later. Move up the
create_workequeue() call to return early and avoid unwinding the call to
riocm_rx_fill().
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit has a memory leak on the error path here, it does
not clean up everything properly.
Cc: Kangjie Lu <kjlu@umn.edu> Cc: Alexandre Bounine <alex.bou9@gmail.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Fixes: 23015b22e47c ("rapidio: fix a NULL pointer dereference when create_workqueue() fails") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-45-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If 'vmbus_establish_gpadl()' fails, the (recv|send)_gpadl will not be
updated and 'hv_uio_cleanup()' in the error handling path will not be
able to free the corresponding buffer.
In such a case, we need to free the buffer explicitly.
HP OMEN dc0019-ur with codec SSID 103c:84da requires the pin config
overrides and the existing mic/mute LED setup. This patch implements
those in the fixup table.
It was reported that the headphone output on ASUS UX430UA (SSID
1043:1740) with ALC295 codec is silent while the speaker works.
After the investigation, it turned out that the DAC assignment has to
be fixed on this machine; unlike others, it expects DAC 0x02 to be
assigned to the speaker pin 0x07 while DAC 0x03 to headphone pin
0x21.
This patch provides a fixup for the fixed DAC/pin mapping for this
device.
Ubuntu users reported an audio bug on the Lenovo Yoga Slim 7 14IIL05,
he installed dual OS (Windows + Linux), if he booted to the Linux
from Windows, the Speaker can't work well, it has crackling noise,
if he poweroff the machine first after Windows, the Speaker worked
well.
Before rebooting or shutdown from Windows, the Windows changes the
codec eapd coeff value, but the BIOS doesn't re-initialize its value,
when booting into the Linux from Windows, the eapd coeff value is not
correct. To fix it, set the codec default value to that coeff register
in the alsa driver.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit message for this change was incorrect as the code
path can never result in a NULL dereference, alluding to the fact that
whatever tool was used to "find this" is broken. It's just an optional
resource reservation, so removing this check is fine.
Cc: Kangjie Lu <kjlu@umn.edu> Acked-by: Takashi Iwai <tiwai@suse.de> Fixes: dcd0feac9bab ("ALSA: sb8: add a check for request_region") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-35-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The GU502 requires a few steps to make headset i/o works properly:
pincfg, verbs to unmute headphone out and callback to toggle output
between speakers and headphone using jack.
Mackie d.2 has an extension card for IEEE 1394 communication, which uses
BridgeCo DM1000 ASIC. On the other hand, Mackie d.4 Pro has built-in
function for IEEE 1394 communication by Oxford Semiconductor OXFW971,
according to schematic diagram available in Mackie website. Although I
misunderstood that Mackie d.2 Pro would be also a model with OXFW971,
it's wrong. Mackie d.2 Pro is a model which includes the extension card
as factory settings.
This commit fixes entries in Kconfig and comment in ALSA OXFW driver.
Cc: <stable@vger.kernel.org> Fixes: fd6f4b0dc167 ("ALSA: bebob: Add skelton for BeBoB based devices") Fixes: ec4dba5053e1 ("ALSA: oxfw: Add support for Behringer/Mackie devices") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210513125652.110249-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
snd_usbmidi_get_ms_info() may access beyond the border when a
malformed descriptor is passed. This patch adds the sanity checks of
the given MS endpoint descriptors, and skips invalid ones.
The quadlets for CIP header is handled as a part of IR context header,
thus it doesn't join in IR context payload. However current calculation
includes the quadlets in IR context payload.
Cc: <stable@vger.kernel.org> Fixes: f11453c7cc01 ("ALSA: firewire-lib: use 16 bytes IR context header to separate CIP header") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210513125652.110249-5-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alesis iO 26 FireWire has two pairs of digital optical interface. It
delivers PCM frames from the interfaces by second isochronous packet
streaming. Although both of the interfaces are available at 44.1/48.0
kHz, first one of them is only available at 88.2/96.0 kHz. It reduces
the number of PCM samples to 4 in Multi Bit Linear Audio data channel
of data blocks on the second isochronous packet streaming.
This commit fixes hardcoded stream formats.
Cc: <stable@vger.kernel.org> Fixes: 28b208f600a3 ("ALSA: dice: add parameters of stream formats for models produced by Alesis") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210513125652.110249-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The initialization of MIDI devices that are found on some LINE6
drivers are currently done in a racy way; namely, the MIDI buffer
instance is allocated and initialized in each private_init callback
while the communication with the interface is already started via
line6_init_cap_control() call before that point. This may lead to
Oops in line6_data_received() when a spurious event is received, as
reported by syzkaller.
This patch moves the MIDI initialization to line6_init_cap_control()
as well instead of the too-lately-called private_init for avoiding the
race. Also this reduces slightly more lines, so it's a win-win
change.
The interrupt handler of intel8x0 calls snd_intel8x0_update() whenever
the hardware sets the corresponding status bit for each stream. This
works fine for most cases as long as the hardware behaves properly.
But when the hardware gives a wrong bit set, this leads to a zero-
division Oops, and reportedly, this seems what happened on a VM.
For fixing the crash, this patch adds a internal flag indicating that
the stream is ready to be updated, and check it (as well as the flag
being in suspended) to ignore such spurious update.
At high sampling transfer frequency, TC Electronic Konnekt Live
transfers/receives 6 audio data frames in multi bit linear audio data
channel of data block in CIP payload. Current hard-coded stream format
is wrong.
Cc: <stable@vger.kernel.org> Fixes: f1f0f330b1d0 ("ALSA: dice: add parameters of stream formats for models produced by TC Electronic") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210518012612.37268-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using smb2_copychunk_range() for large ranges we will
run through several iterations of a loop calling SMB2_ioctl()
but never actually free the returned buffer except for the final
iteration.
This leads to memory leaks everytime a large copychunk is requested.
Fixes: 9bf0c9cd4314 ("CIFS: Fix SMB2/SMB3 Copy offload support (refcopy) for large files") Cc: <stable@vger.kernel.org> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Generally a delayed iput is added when we might do the final iput, so
usually we'll end up sleeping while processing the delayed iputs
naturally. However there's no guarantee of this, especially for small
files. In production we noticed 5 instances of RCU stalls while testing
a kernel release overnight across 1000 machines, so this is relatively
common:
When a interruptible mutex locker is interrupted by a signal
without acquiring this lock and removed from the wait queue.
if the mutex isn't contended enough to have a waiter
put into the wait queue again, the setting of the WAITER
bit will force mutex locker to go into the slowpath to
acquire the lock every time, so if the wait queue is empty,
the WAITER bit need to be clear.
Fixes: 040a0a371005 ("mutex: Add support for wound/wait style locks") Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Zqiang <qiang.zhang@windriver.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210517034005.30828-1-qiang.zhang@windriver.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Reset the ns->file value to NULL also in the error case in
nvmet_file_ns_enable().
The ns->file variable points either to file object or contains the
error code after the filp_open() call. This can lead to following
problem:
When the user first setups an invalid file backend and tries to enable
the ns, it will fail. Then the user switches over to a bdev backend
and enables successfully the ns. The first received I/O will crash the
system because the IO backend is chosen based on the ns->file value:
Suppose we have 2 threads, the group-leader L and a sub-theread T,
both parked in ptrace_stop(). Debugger tries to resume both threads
and does
ptrace(PTRACE_CONT, T);
ptrace(PTRACE_CONT, L);
If the sub-thread T execs in between, the 2nd PTRACE_CONT doesn not
resume the old leader L, it resumes the post-exec thread T which was
actually now stopped in PTHREAD_EVENT_EXEC. In this case the
PTHREAD_EVENT_EXEC event is lost, and the tracer can't know that the
tracee changed its pid.
This patch makes ptrace() fail in this case until debugger does wait()
and consumes PTHREAD_EVENT_EXEC which reports old_pid. This affects all
ptrace requests except the "asynchronous" PTRACE_INTERRUPT/KILL.
The patch doesn't add the new PTRACE_ option to not complicate the API,
and I _hope_ this won't cause any noticeable regression:
- If debugger uses PTRACE_O_TRACEEXEC and the thread did an exec
and the tracer does a ptrace request without having consumed
the exec event, it's 100% sure that the thread the ptracer
thinks it is targeting does not exist anymore, or isn't the
same as the one it thinks it is targeting.
- To some degree this patch adds nothing new. In the scenario
above ptrace(L) can fail with -ESRCH if it is called after the
execing sub-thread wakes the leader up and before it "steals"
the leader's pid.
The uapi_get_object() function returns error pointers, it never returns
NULL.
Fixes: 149d3845f4a5 ("RDMA/uverbs: Add a method to introspect handles in a context") Link: https://lore.kernel.org/r/YJ6Got+U7lz+3n9a@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
init_dell_smbios_wmi() only registers the dell_smbios_wmi_driver on systems
where the Dell WMI interface is supported. While exit_dell_smbios_wmi()
unregisters it unconditionally, this leads to the following oops:
The virtio framework uses wmb() when updating avail->idx. It
guarantees the write order, but not necessarily loading order
for the code accessing the memory. This commit adds a load barrier
after reading the avail->idx to make sure all the data in the
descriptor is visible. It also adds a barrier when returning the
packet to virtio framework to make sure read/writes are visible to
the virtio code.
Fixes: 1357dfd7261f ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc") Signed-off-by: Liming Sun <limings@nvidia.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/1620433812-17911-1-git-send-email-limings@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
restrack should only be attached to a cm_id while the ID has a valid
device pointer. It is set up when the device is first loaded, but not
cleared when the device is removed. There is also two copies of the device
pointer, one private and one in the public API, and these were left out of
sync.
Make everything go to NULL together and manipulate restrack right around
the device assignments.
Found by syzcaller:
BUG: KASAN: wild-memory-access in __list_del include/linux/list.h:112 [inline]
BUG: KASAN: wild-memory-access in __list_del_entry include/linux/list.h:135 [inline]
BUG: KASAN: wild-memory-access in list_del include/linux/list.h:146 [inline]
BUG: KASAN: wild-memory-access in cma_cancel_listens drivers/infiniband/core/cma.c:1767 [inline]
BUG: KASAN: wild-memory-access in cma_cancel_operation drivers/infiniband/core/cma.c:1795 [inline]
BUG: KASAN: wild-memory-access in cma_cancel_operation+0x1f4/0x4b0 drivers/infiniband/core/cma.c:1783
Write of size 8 at addr dead000000000108 by task syz-executor716/334
When there is fatal event on the slave port, the device is marked as not
active. We need to mark it as active again when the slave is recovered to
regain full functionality.
With the current implementation of the UFS driver active_queues is 1
instead of 0 if all UFS request queues are idle. That causes
hctx_may_queue() to divide the queue depth by 2 when queueing a request and
hence reduces the usable queue depth.
The shared tag set code in the block layer keeps track of the number of
active request queues. blk_mq_tag_busy() is called before a request is
queued onto a hwq and blk_mq_tag_idle() is called some time after the hwq
became idle. blk_mq_tag_idle() is called from inside blk_mq_timeout_work().
Hence, blk_mq_tag_idle() is only called if a timer is associated with each
request that is submitted to a request queue that shares a tag set with
another request queue.
Adds a blk_mq_start_request() call in ufshcd_exec_dev_cmd(). This doubles
the queue depth on my test setup from 16 to 32.
In addition to increasing the usable queue depth, also fix the
documentation of the 'timeout' parameter in the header above
ufshcd_exec_dev_cmd().
Link: https://lore.kernel.org/r/20210513164912.5683-1-bvanassche@acm.org Fixes: 7252a3603015 ("scsi: ufs: Avoid busy-waiting by eliminating tag conflicts") Cc: Can Guo <cang@codeaurora.org> Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Bean Huo <beanhuo@micron.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Can Guo <cang@codeaurora.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
rxe_qp_do_cleanup() relies on valid pointer values in QP for the properly
created ones, but in case rxe_qp_from_init() failed it was filled with
garbage and caused tot the following error.
How the type promotion works in ternary expressions is a bit tricky.
The problem is that scpi_clk_get_val() returns longs, "ret" is a int
which holds a negative error code, and le32_to_cpu() is an unsigned int.
We want the negative error code to be cast to a negative long. But
because le32_to_cpu() is an u32 then "ret" is type promoted to u32 and
becomes a high positive and then it is promoted to long and it is still
a high positive value.
Fix this by getting rid of the ternary.
Link: https://lore.kernel.org/r/YIE7pdqV/h10tEAK@mwanda Fixes: 8cb7cf56c9fe ("firmware: add support for ARM System Control and Power Interface(SCPI) protocol") Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[sudeep.holla: changed to return 0 as clock rate on error] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some distributions are about to switch to Python 3 support only.
This means that /usr/bin/python, which is Python 2, is not available
anymore. Hence, switch scripts to use Python 3 explicitly.
Change every shebang which does not need an argument to use /usr/bin/env.
This is needed as not every distro has everything under /usr/bin,
sometimes not even bash.
When a VCPU is created, the kvm_vcpu struct is initialized to zero in
kvm_vm_ioctl_create_vcpu(). On VHE systems, the first time
vcpu.arch.mdcr_el2 is loaded on hardware is in vcpu_load(), before it is
set to a sensible value in kvm_arm_setup_debug() later in the run loop. The
result is that KVM executes for a short time with MDCR_EL2 set to zero.
This has several unintended consequences:
* Setting MDCR_EL2.HPMN to 0 is constrained unpredictable according to ARM
DDI 0487G.a, page D13-3820. The behavior specified by the architecture
in this case is for the PE to behave as if MDCR_EL2.HPMN is set to a
value less than or equal to PMCR_EL0.N, which means that an unknown
number of counters are now disabled by MDCR_EL2.HPME, which is zero.
* The host configuration for the other debug features controlled by
MDCR_EL2 is temporarily lost. This has been harmless so far, as Linux
doesn't use the other fields, but that might change in the future.
Let's avoid both issues by initializing the VCPU's mdcr_el2 field in
kvm_vcpu_vcpu_first_run_init(), thus making sure that the MDCR_EL2 register
has a consistent value after each vcpu_load().
Fixes: d5a21bcc2995 ("KVM: arm64: Move common VHE/non-VHE trap config in separate functions") Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210407144857.199746-3-alexandru.elisei@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Same reasons than for the previous commits : 6289a98f0817 ("sit: proper dev_{hold|put} in ndo_[un]init methods") 40cb881b5aaa ("ip6_vti: proper dev_{hold|put} in ndo_[un]init methods") 7f700334be9a ("ip6_gre: proper dev_{hold|put} in ndo_[un]init methods")
After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
a warning [1]
Issue here is that:
- all dev_put() should be paired with a corresponding prior dev_hold().
- A driver doing a dev_put() in its ndo_uninit() MUST also
do a dev_hold() in its ndo_init(), only when ndo_init()
is returning 0.
Otherwise, register_netdevice() would call ndo_uninit()
in its error path and release a refcount too soon.
After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
a warning [1]
Issue here is that:
- all dev_put() should be paired with a corresponding dev_hold(),
and vice versa.
- A driver doing a dev_put() in its ndo_uninit() MUST also
do a dev_hold() in its ndo_init(), only when ndo_init()
is returning 0.
Otherwise, register_netdevice() would call ndo_uninit()
in its error path and release a refcount too soon.
ip6_gre for example (among others problematic drivers)
has to use dev_hold() in ip6gre_tunnel_init_common()
instead of from ip6gre_newlink_common(), covering
both ip6gre_tunnel_init() and ip6gre_tap_init()/
Note that ip6gre_tunnel_init_common() is not called from
ip6erspan_tap_init() thus we also need to add a dev_hold() there,
as ip6erspan_tunnel_uninit() does call dev_put()
The RX FIFO overflows when the system is not able to process all received
packets and they start accumulating (first in the DMA queue in memory,
then in the FIFO). An interrupt is then raised for each overflowing packet
and handled in stmmac_interrupt(). This is counter-productive, since it
brings the system (or more likely, one CPU core) to its knees to process
the FIFO overflow interrupts.
stmmac_interrupt() handles overflow interrupts by writing the rx tail ptr
into the corresponding hardware register (according to the MAC spec, this
has the effect of restarting the MAC DMA). However, without freeing any rx
descriptors, the DMA stops right away, and another overflow interrupt is
raised as the FIFO overflows again. Since the DMA is already restarted at
the end of stmmac_rx_refill() after freeing descriptors, disabling FIFO
overflow interrupts and the corresponding handling code has no side effect,
and eliminates the interrupt storm when the RX FIFO overflows.
In RT system, the spin_lock will be replaced by sleepable rt_mutex lock,
in __call_rcu(), disable interrupts before calling
kasan_record_aux_stack(), will trigger this calltrace:
BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:951
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 19, name: pgdatinit0
Call Trace:
___might_sleep.cold+0x1b2/0x1f1
rt_spin_lock+0x3b/0xb0
stack_depot_save+0x1b9/0x440
kasan_save_stack+0x32/0x40
kasan_record_aux_stack+0xa5/0xb0
__call_rcu+0x117/0x880
__exit_signal+0xafb/0x1180
release_task+0x1d6/0x480
exit_notify+0x303/0x750
do_exit+0x678/0xcf0
kthread+0x364/0x4f0
ret_from_fork+0x22/0x30
Replace spinlock with raw_spinlock.
Link: https://lkml.kernel.org/r/20210329084009.27013-1-qiang.zhang@windriver.com Signed-off-by: Zqiang <qiang.zhang@windriver.com> Reported-by: Andrew Halaney <ahalaney@redhat.com> Cc: Alexander Potapenko <glider@google.com> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: Yogesh Lal <ylal@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
blkdev_read_iter can truncate iov_iter's count since the count + pos may
exceed the size of the blkdev. This will confuse io_read that we have
consume the iovec. And once we do the iov_iter_revert in io_read, we
will trigger the slab-out-of-bounds. Fix it by reexpand the count with
size has been truncated.
Without this change, the DAC ctl's name could be changed only when
the machine has both Speaker and Headphone, but we met some machines
which only has Lineout and Headhpone, and the Lineout and Headphone
share the Audio Mixer0 and DAC0, the ctl's name is set to "Front".
On most of machines, the "Front" is used for Speaker only or Lineout
only, but on this machine it is shared by Lineout and Headphone,
This introduces an issue in the pipewire and pulseaudio, suppose users
want the Headphone to be on and the Speaker/Lineout to be off, they
could turn off the "Front", this works on most of the machines, but on
this machine, the "Front" couldn't be turned off otherwise the
headphone will be off too. Here we do some change to let the ctl's
name change to "Headphone+LO" on this machine, and pipewire and
pulseaudio already could handle "Headphone+LO" and "Speaker+LO".
(https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/747)
Like some other Bay and Cherry Trail SoC based devices the Dell Venue
10 Pro 5055 has an embedded-controller which uses ACPI GPIO events to
report events instead of using the standard ACPI EC interface for this.
The EC interrupt is only used to report battery-level changes and
it keeps doing this while the system is suspended, causing the system
to not stay suspended.
Add an ignore-wake quirk for the GPIO pin used by the EC to fix the
spurious wakeups from suspend.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Our driver supports overlay planes, and as expected, some userspace
compositor takes advantage of these features. If the userspace is not
enabling the cursor, they can use multiple planes as they please.
Nevertheless, we start to have constraints when userspace tries to
enable hardware cursor with various planes. Basically, we cannot draw
the cursor at the same size and position on two separated pipes since it
uses extra bandwidth and DML only run with one cursor.
For those reasons, when we enable hardware cursor and multiple planes,
our driver should accept variations like the ones described below:
In this scenario, we can have the desktop UI in the overlay and some
other framebuffer attached to the primary plane (e.g., video). However,
userspace needs to obey some rules and avoid scenarios like the ones
described below (when enabling hw cursor):
If the userspace violates some of the above scenarios, our driver needs
to reject the commit; otherwise, we can have unexpected behavior. Since
we don't have a proper driver validation for the above case, we can see
some problems like a duplicate cursor in applications that use multiple
planes. This commit fixes the cursor issue and others by adding adequate
verification for multiple planes.
Change since V1 (Harry and Sean):
- Remove cursor verification from the equation.
Cc: Louis Li <Ching-shih.Li@amd.com> Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a crash in the function br_get_link_af_size_filtered,
as the port_exists(dev) is true and the rx_handler_data of dev is NULL.
But the rx_handler_data of dev is correct saved in vmcore.
In br_add_if(), we found there is no guarantee that
assigning rx_handler_data to dev->rx_handler_data
will before setting the IFF_BRIDGE_PORT bit of priv_flags.
So there is a possible data competition:
CPU 0: CPU 1:
(RCU read lock) (RTNL lock)
rtnl_calcit() br_add_slave()
if_nlmsg_size() br_add_if()
br_get_link_af_size_filtered() -> netdev_rx_handler_register
...
// The order is not guaranteed
... -> dev->priv_flags |= IFF_BRIDGE_PORT;
// The IFF_BRIDGE_PORT bit of priv_flags has been set
-> if (br_port_exists(dev)) {
// The dev->rx_handler_data has NOT been assigned
-> p = br_port_get_rcu(dev);
....
-> rcu_assign_pointer(dev->rx_handler_data, rx_handler_data);
...
Fix it in br_get_link_af_size_filtered, using br_port_get_check_rcu() and checking the return value.
Signed-off-by: Zhang Zhengming <zhangzhengming@huawei.com> Reviewed-by: Zhao Lei <zhaolei69@huawei.com> Reviewed-by: Wang Xiaogang <wangxiaogang3@huawei.com> Suggested-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If tcmu_handle_completions() finds an invalid cmd_id while looping over cmd
responses from userspace it sets TCMU_DEV_BIT_BROKEN and breaks the
loop. This means that it does further handling for the tcmu device.
Skip that handling by replacing 'break' with 'return'.
Additionally change tcmu_handle_completions() from unsigned int to bool,
since the value used in return already is bool.
In devloss timer handler and in backend calls to terminate remote port I/O,
there is logic to walk through all active IOCBs and validate them to
potentially trigger an abort request. This logic is causing illegal memory
accesses which leads to a crash. Abort IOCBs, which may be on the list, do
not have an associated lpfc_io_buf struct. The driver is trying to map an
lpfc_io_buf struct on the IOCB and which results in a bogus address thus
the issue.
Fix by skipping over ABORT IOCBs (CLOSE IOCBs are ABORTS that don't send
ABTS) in the IOCB scan logic.
Link: https://lore.kernel.org/r/20210421234433.102079-1-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Prior to clang 13.0.0, the RISC-V name for the mcount symbol was
"mcount", which differs from the GCC version of "_mcount", which results
in the following errors:
riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_level':
main.c:(.text+0xe): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_start':
main.c:(.text+0x4e): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_finish':
main.c:(.text+0x92): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `.LBB32_28':
main.c:(.text+0x30c): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `free_initmem':
main.c:(.text+0x54c): undefined reference to `mcount'
This has been corrected in https://reviews.llvm.org/D98881 but the
minimum supported clang version is 10.0.1. To avoid build errors and to
gain a working function tracer, adjust the name of the mcount symbol for
older versions of clang in mount.S and recordmcount.pl.
On Qualcomm ARM32 platforms, the SMC call can return before it has
completed. If this occurs, the call can be restarted, but it requires
using the returned session ID value from the interrupted SMC call.
The ARM32 SMCC code already has the provision to add platform specific
quirks for things like this. So let's make use of it and add the
Qualcomm specific quirk (ARM_SMCCC_QUIRK_QCOM_A6) used by the QCOM_SCM
driver.
This change is similar to the below one added for ARM64 a while ago:
commit 82bcd087029f ("firmware: qcom: scm: Fix interrupted SCM calls")
Without this change, the Qualcomm ARM32 platforms like SDX55 will return
-EINVAL for SMC calls used for modem firmware loading and validation.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
CONFIG_GCOV doesn't work with modules, and for various reasons
it cannot work, see also
https://lore.kernel.org/r/d36ea54d8c0a8dd706826ba844a6f27691f45d55.camel@sipsolutions.net
Make CONFIG_GCOV depend on !MODULES to avoid anyone
running into issues there. This also means we need
not export the gcov symbols.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
Ritesh reported a bug [1] against UML, noting that it crashed on
startup. The backtrace shows the following (heavily redacted):
(gdb) bt
...
#26 0x0000000060015b5d in sem_init () at ipc/sem.c:268
#27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2
#28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72
...
#40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359
...
#44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486
#45 0x00007f8990968b85 in __getgrnam_r [...]
#46 0x00007f89909d6b77 in grantpt [...]
#47 0x00007f8990a9394e in __GI_openpty [...]
#48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407
#49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598
#50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45
#51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334
#52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144
indicating that the UML function openpty_cb() calls openpty(),
which internally calls __getgrnam_r(), which causes the nsswitch
machinery to get started.
This loads, through lots of indirection that I snipped, the
libcom_err.so.2 library, which (in an unknown function, "??")
calls sem_init().
Now, of course it wants to get libpthread's sem_init(), since
it's linked against libpthread. However, the dynamic linker
looks up that symbol against the binary first, and gets the
kernel's sem_init().
Hajime Tazaki noted that "objcopy -L" can localize a symbol,
so the dynamic linker wouldn't do the lookup this way. I tried,
but for some reason that didn't seem to work.
Doing the same thing in the linker script instead does seem to
work, though I cannot entirely explain - it *also* works if I
just add "VERSION { { global: *; }; }" instead, indicating that
something else is happening that I don't really understand. It
may be that explicitly doing that marks them with some kind of
empty version, and that's different from the default.
Explicitly marking them with a version breaks kallsyms, so that
doesn't seem to be possible.
Marking all the symbols as local seems correct, and does seem
to address the issue, so do that. Also do it for static link,
nsswitch libraries could still be loaded there.
[1] https://bugs.debian.org/983379
Reported-by: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Tested-By: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some buggy BIOS-es bring up the touchscreen-controller in a stuck
state where it blocks the I2C bus. Specifically this happens on
the Jumper EZpad 7 tablet model.
After much poking at this problem I have found that the following steps
are necessary to unstuck the chip / bus:
1. Turn off the Silead chip.
2. Try to do an I2C transfer with the chip, this will fail in response to
which the I2C-bus-driver will call: i2c_recover_bus() which will unstuck
the I2C-bus. Note the unstuck-ing of the I2C bus only works if we first
drop the chip of the bus by turning it off.
3. Turn the chip back on.
On the x86/ACPI systems were this problem is seen, step 1. and 3. require
making ACPI calls and dealing with ACPI Power Resources. This commit adds
a workaround which runtime-suspends the chip to turn it off, leaving it up
to the ACPI subsystem to deal with all the ACPI specific details.
There is no good way to detect this bug, so the workaround gets activated
by a new "silead,stuck-controller-bug" boolean device-property. Since this
is only used on x86/ACPI, this will be set by model specific device-props
set by drivers/platform/x86/touchscreen_dmi.c. Therefor this new
device-property is not documented in the DT-bindings.
Dmesg will contain the following messages on systems where the workaround
is activated:
Several users have been reporting that elants_i2c gives several errors
during probe and that their touchscreen does not work on their Lenovo AMD
based laptops with a touchscreen with a ELAN0001 ACPI hardware-id:
Despite these errors, the elants_i2c driver stays bound to the device
(it returns 0 from its probe method despite the errors), blocking the
i2c-hid driver from binding.
Manually unbinding the elants_i2c driver and binding the i2c-hid driver
makes the touchscreen work.
Check if the ACPI-fwnode for the touchscreen contains one of the i2c-hid
compatiblity-id strings and if it has the I2C-HID spec's DSM to get the
HID descriptor address, If it has both then make elants_i2c not bind,
so that the i2c-hid driver can bind.
This assumes that non of the (older) elan touchscreens which actually
need the elants_i2c driver falsely advertise an i2c-hid compatiblity-id
+ DSM in their ACPI-fwnodes. If some of them actually do have this
false advertising, then this change may lead to regressions.
While at it also drop the unnecessary DEVICE_NAME prefixing of the
"I2C check functionality error", dev_err already outputs the driver-name.
In enable_slot(), if pci_get_slot() returns NULL, we clear the SLOT_ENABLED
flag. When pci_get_slot() finds a device, it increments the device's
reference count. In this case, we did not call pci_dev_put() to decrement
the reference count, so the memory of the device (struct pci_dev type) will
eventually leak.
Call pci_dev_put() to decrement its reference count when pci_get_slot()
returns a PCI device.
Link: https://lore.kernel.org/r/b411af88-5049-a1c6-83ac-d104a1f429be@huawei.com Signed-off-by: Feilong Lin <linfeilong@huawei.com> Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / linux-stable / log