uprobe_write_opcode() must not cross page boundary; prepare_uprobe()
relies on arch_uprobe_analyze_insn() which should validate "vaddr" but
some architectures (csky, s390, and sparc) don't do this.
We can remove the BUG_ON() check in prepare_uprobe() and validate the
offset early in __uprobe_register(). The new IS_ALIGNED() check matches
the alignment check in arch_prepare_kprobe() on supported architectures,
so I think that all insns must be aligned to UPROBE_SWBP_INSN_SIZE.
Another problem is __update_ref_ctr() which was wrong from the very
beginning, it can read/write outside of kmap'ed page unless "vaddr" is
aligned to sizeof(short), __uprobe_register() should check this too.
SRBDS is an MDS-like speculative side channel that can leak bits from the
random number generator (RNG) across cores and threads. New microcode
serializes the processor access during the execution of RDRAND and
RDSEED. This ensures that the shared buffer is overwritten before it is
released for reuse.
While it is present on all affected CPU models, the microcode mitigation
is not needed on models that enumerate ARCH_CAPABILITIES[MDS_NO] in the
cases where TSX is not supported or has been disabled with TSX_CTRL.
The mitigation is activated by default on affected processors and it
increases latency for RDRAND and RDSEED instructions. Among other
effects this will reduce throughput from /dev/urandom.
* Enable administrator to configure the mitigation off when desired using
either mitigations=off or srbds=off.
* Export vulnerability status via sysfs
* Rename file-scoped macros to apply for non-whitelist table initializations.
[ bp: Massage,
- s/VULNBL_INTEL_STEPPING/VULNBL_INTEL_STEPPINGS/g,
- do not read arch cap MSR a second time in tsx_fused_off() - just pass it in,
- flip check in cpu_set_bug_bits() to save an indentation level,
- reflow comments.
jpoimboe: s/Mitigated/Mitigation/ in user-visible strings
tglx: Dropped the fused off magic for now
]
Intel uses the same family/model for several CPUs. Sometimes the
stepping must be checked to tell them apart.
On x86 there can be at most 16 steppings. Add a steppings bitmask to
x86_cpu_id and a X86_MATCH_VENDOR_FAMILY_MODEL_STEPPING_FEATURE macro
and support for matching against family/model/stepping.
[ bp: Massage. ]
Signed-off-by: Mark Gross <mgross@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
qfprom has different address spaces for read and write. Reads are
always done from corrected address space, where as writes are done
on raw address space.
Writing to corrected address space is invalid and ignored, so it
does not make sense to have this support in the driver which only
supports corrected address space regions at the moment.
The value in shared headers was fixed 9 years ago in commit 8d661f1e462d
("ieee80211: correct IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK macro") and
while looking at using shared headers for other duplicated constants
I noticed this driver uses the old value.
The macros are also defined twice in this file so I am deleting the
second definition.
hvc_open sets tty->driver_data to NULL when open fails at some point.
Typically, the failure happens in hp->ops->notifier_add(). If there is
a racing process which tries to open such mangled tty, which was not
closed yet, the process will crash in hvc_open as tty->driver_data is
NULL.
All this happens because close wants to know whether open failed or not.
But ->open should not NULL this and other tty fields for ->close to be
happy. ->open should call tty_port_set_initialized(true) and close
should check by tty_port_initialized() instead. So do this properly in
this driver.
So this patch removes these from ->open:
* tty_port_tty_set(&hp->port, NULL). This happens on last close.
* tty->driver_data = NULL. Dtto.
* tty_port_put(&hp->port). This happens in shutdown and until now, this
must have been causing a reference underflow, if I am not missing
something.
When k_ascii is invoked several times in a row there is a potential for
signed integer overflow:
UBSAN: Undefined behaviour in drivers/tty/vt/keyboard.c:888:19 signed integer overflow:
10 * 1111111111 cannot be represented in type 'int'
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.11 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xce/0x128 lib/dump_stack.c:118
ubsan_epilogue+0xe/0x30 lib/ubsan.c:154
handle_overflow+0xdc/0xf0 lib/ubsan.c:184
__ubsan_handle_mul_overflow+0x2a/0x40 lib/ubsan.c:205
k_ascii+0xbf/0xd0 drivers/tty/vt/keyboard.c:888
kbd_keycode drivers/tty/vt/keyboard.c:1477 [inline]
kbd_event+0x888/0x3be0 drivers/tty/vt/keyboard.c:1495
While it can be worked around by using check_mul_overflow()/
check_add_overflow(), it is better to introduce a separate flag to
signal that number pad is being used to compose a symbol, and
change type of the accumulator from signed to unsigned, thus
avoiding undefined behavior when it overflows.
Some embedded devices still use these serial ports; make sure they're
still enabled by default on architectures more likely to have them, to
avoid rendering someone's console unavailable.
The function dma_controller_irq() locks up the exact same spinlock we
locked before calling it, which obviously resulted in a deadlock when
CONFIG_SMP was enabled. This flew under the radar as none of the boards
supported by this driver needs SMP.
Fixes: 57aadb46bd63 ("usb: musb: jz4740: Add support for DMA") Cc: stable@vger.kernel.org Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200525025049.3400-6-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 17539f2f4f0b ("usb: musb: fix enumeration after resume") replaced
musb_start() in musb_resume() to not override softconnect bit, but it
doesn't restart the session for host port which was done in musb_start().
The session could be disabled in musb_suspend(), which leads the host
port doesn't stay in host mode.
So let's start the session specifically for host port in musb_resume().
Fixes: 17539f2f4f0b ("usb: musb: fix enumeration after resume") Cc: stable@vger.kernel.org Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200525025049.3400-3-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A wrong error message is printed out currently, like on STM32MP15:
- stm32-adc-core 48003000.adc: IRQ index 2 not found.
This is seen since commit 7723f4c5ecdb ("driver core: platform: Add an
error message to platform_get_irq*()").
The STM32 ADC core driver wrongly requests up to 3 interrupt lines. It
should request only the necessary IRQs, based on the compatible:
- stm32f4/h7 ADCs share a common interrupt
- stm32mp1, has one interrupt line per ADC.
So add the number of required interrupts to the compatible data.
Fixes: d58c67d1d851 ("iio: adc: stm32-adc: add support for STM32MP1") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data with alignment
explicitly requested. This data is allocated with kzalloc so no
data can leak appart from previous readings.
Fixes: a1d642266c14 ("iio: chemical: add support for Plantower PMS7003 sensor") Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: <Stable@vger.kernel.org> Acked-by: Tomasz Duszynski <tomasz.duszynski@octakon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
Fixes: 232e0f6ddeae ("iio: chemical: add support for Sensirion SPS30 sensor") Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: <Stable@vger.kernel.org> Acked-by: Tomasz Duszynski <tomasz.duszynski@octakon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[a] subset of all CH341 devices stop responding to bulk
transfers, usually after the third byte, when the highest
prescaler bit (0b100) is set. There is one exception, namely a
prescaler of exactly 0b111 (fact=1, ps=3).
Fix this by forcing a lower base clock (fact = 0) whenever needed.
This specifically makes the standard rates 110, 134 and 200 bps work
again with these devices.
A subset of CH341 devices does not support all features, namely the
prescaler is limited to a reduced precision and there is no support for
sending a RS232 break condition. This patch adds a detection function
which will be extended to set quirk flags as they're implemented.
The author's affected device has an imprint of "340" on the
turquoise-colored plug, but not all such devices appear to be affected.
Signed-off-by: Michael Hanselmann <public@hansmi.ch> Link: https://lore.kernel.org/r/1e1ae0da6082bb528a44ef323d4e1d3733d38858.1585697281.git.public@hansmi.ch
[ johan: use long type for quirks; rephrase and use port device for
messages; handle short reads; set quirk flags directly in
helper function ] Cc: stable <stable@vger.kernel.org> # 5.5 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_wwan_indat_callback() shouldn't resubmit rx urb if the previous urb
status is a fatal error. Or the usb controller would keep processing the
new urbs then run into interrupt storm, and has no chance to recover.
Fixes: 6c1ee66a0b2b ("USB-Serial: Fix error handling of usb_wwan") Cc: stable@vger.kernel.org Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The problem is that we always copy a minimum of ETH_ZLEN (60) bytes from
skb->data even when skb->len is less than ETH_ZLEN so it leads to a read
overflow.
The fix is to pad skb->data to at least ETH_ZLEN bytes.
Cc: <stable@vger.kernel.org> Reported-by: Hu Jiahui <kirin.say@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200527184830.GA1164846@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, setting a bridge's self PVID to other value and deleting
the default VID 1 renders untagged ports of that VLAN unable to talk to
the CPU port:
bridge vlan add dev br0 vid 2 pvid untagged self
bridge vlan del dev br0 vid 1 self
bridge vlan add dev sw0p0 vid 2 pvid untagged
bridge vlan del dev sw0p0 vid 1
# br0 cannot send untagged frames out of sw0p0 anymore
That is because the CPU port is set to security mode and its PVID is
still 1, and untagged frames are dropped due to VLAN member violation.
Set the CPU port to fallback mode so untagged frames can pass through.
Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the alignment attribute of struct ipu3_uapi_awb_fr_config_s to the
field in struct ipu3_uapi_4a_config, the other location where the struct
is used.
Fixes: commit c9d52c114a9f ("media: staging: imgu: Address a compiler warning on alignment") Reported-by: Tomasz Figa <tfiga@chromium.org> Tested-by: Bingbu Cao <bingbu.cao@intel.com> Cc: stable@vger.kernel.org # for v5.3 and up Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The patch being reverted changed the memory layout of struct
ipu3_uapi_acc_param. Revert it, and address the compiler warning issues in
further patches.
Fixes: commit c9d52c114a9f ("media: staging: imgu: Address a compiler warning on alignment") Reported-by: Tomasz Figa <tfiga@chromium.org> Tested-by: Bingbu Cao <bingbu.cao@intel.com> Cc: stable@vger.kernel.org # for v5.3 and up Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
alloc_percpu() may return NULL, which means chan->buf may be set to NULL.
In that case, when we do *per_cpu_ptr(chan->buf, ...), we dereference an
invalid pointer:
BUG: Unable to handle kernel data access at 0x7dae0000
Faulting instruction address: 0xc0000000003f3fec
...
NIP relay_open+0x29c/0x600
LR relay_open+0x270/0x600
Call Trace:
relay_open+0x264/0x600 (unreliable)
__blk_trace_setup+0x254/0x600
blk_trace_setup+0x68/0xa0
sg_ioctl+0x7bc/0x2e80
do_vfs_ioctl+0x13c/0x1300
ksys_ioctl+0x94/0x130
sys_ioctl+0x48/0xb0
system_call+0x5c/0x68
Check if alloc_percpu returns NULL.
This was found by syzkaller both on x86 and powerpc, and the reproducer
it found on powerpc is capable of hitting the issue as an unprivileged
user.
Fixes: 017c59c042d0 ("relay: Use per CPU constructs for the relay channel buffer pointers") Reported-by: syzbot+1e925b4b836afe85a1c6@syzkaller-ppc64.appspotmail.com Reported-by: syzbot+587b2421926808309d21@syzkaller-ppc64.appspotmail.com Reported-by: syzbot+58320b7171734bf79d26@syzkaller.appspotmail.com Reported-by: syzbot+d6074fb08bdb2e010520@syzkaller.appspotmail.com Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Akash Goel <akash.goel@intel.com> Cc: Andrew Donnellan <ajd@linux.ibm.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Salvatore Bonaccorso <carnil@debian.org> Cc: <stable@vger.kernel.org> [4.10+] Link: http://lkml.kernel.org/r/20191219121256.26480-1-dja@axtens.net Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are two problems in crypto_spawn_alg. First of all it may
return spawn->alg even if spawn->dead is set. This results in a
double-free as detected by syzbot.
Secondly the setting of the DYING flag is racy because we hold
the read-lock instead of the write-lock. We should instead call
crypto_shoot_alg in a safe manner by gaining a refcount, dropping
the lock, and then releasing the refcount.
This patch fixes both problems.
Reported-by: syzbot+fc0674cde00b66844470@syzkaller.appspotmail.com Fixes: 4f87ee118d16 ("crypto: api - Do not zap spawn->alg") Fixes: 73669cc55646 ("crypto: api - Fix race condition in...") Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the AirVasT USB wireless devices 124a:4026
to the list of supported devices. It's using the ISL3886
usb firmware. Without this modification, the wiki adapter
is not recognized.
Cc: <stable@vger.kernel.org> Signed-off-by: Giuseppe Marco Randazzo <gmrandazzo@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [formatted, reworded] Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200405220659.45621-1-chunkeey@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Two touchpad/trackstick combos are currently not behaving properly.
They define a mouse emulation collection, as per Win8 requirements,
but also define a separate mouse collection for the trackstick.
The way the kernel currently treat the collections is that it
merges both in one device. However, given that the first mouse
collection already defines X,Y and left, right buttons, when
mapping the events from the second mouse collection, hid-multitouch
sees that these events are already mapped, and simply ignores them.
To be able to report events from the tracktick, add a new quirked
class for it, and manually add the 2 devices we know about.
Fix for non-working buttons on knock-off USB dongles for Sony
controllers. These USB dongles are used to connect older Sony DA/DS1/DS2
controllers via USB and are common on Amazon, AliExpress, etc. Without
the patch, the square, X, and circle buttons do not function. These
dongles used to work prior to kernel 4.10 but removing the global DS3
report fixup in commit e19a267b9987 ("HID: sony: DS3 comply to Linux gamepad
spec") exposed the problem.
Many people reported the problem on the Ubuntu forums and are working
around the problem by falling back to the 4.9 hid-sony driver.
The problem stems from these dongles incorrectly reporting their button
count as 13 instead of 16. This patch fixes up the report descriptor by
changing the button report count to 16 and removing 3 padding bits.
Cc: stable@vger.kernel.org Fixes: e19a267b9987 ("HID: sony: DS3 comply to Linux gamepad spec") Signed-off-by: Scott Shumate <scott.shumate@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The original code in mm/mremap.c checks huge pmd by:
if (is_swap_pmd(*old_pmd) || pmd_trans_huge(*old_pmd)) {
However, a DAX mapped nvdimm is mapped as huge page (by default) but it
is not transparent huge page (_PAGE_PSE | PAGE_DEVMAP). This commit
changes the condition to include the case.
This addresses CVE-2020-10757.
Fixes: 5c7fb56e5e3f ("mm, dax: dax-pmd vs thp-pmd vs hugetlbfs-pmd") Cc: <stable@vger.kernel.org> Reported-by: Fan Yang <Fan_Yang@sjtu.edu.cn> Signed-off-by: Fan Yang <Fan_Yang@sjtu.edu.cn> Tested-by: Fan Yang <Fan_Yang@sjtu.edu.cn> Tested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[a3fbc2e6bb0: media: mc-entity.c: use WARN_ON, validate link pads]
The dvbdev incorrectly requests a tuner sink pad to connect to a demux
sink pad. The media controller failure percolates back and the dvb device
creation fails. Fix this by requesting a tuner source pad. Instead of
forcing that pad to be index zero, check if a negative integer error
is returned. A note is added that first source pad found is chosen.
Affected bridges cx231xx and em28xx printed the below warning[s]
when a variety of media controller dvb enabled devices were connected.
The warning returns an error causing all affected devices to fail DVB
device creation.
Yes, staying withing 80 columns is certainly still _preferred_. But
it's not the hard limit that the checkpatch warnings imply, and other
concerns can most certainly dominate.
Increase the default limit to 100 characters. Not because 100
characters is some hard limit either, but that's certainly a "what are
you doing" kind of value and less likely to be about the occasional
slightly longer lines.
Miscellanea:
- to avoid unnecessary whitespace changes in files, checkpatch will no
longer emit a warning about line length when scanning files unless
--strict is also used
- Add a bit to coding-style about alignment to open parenthesis
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 31 May 2020 17:45:11 +0000 (10:45 -0700)]
Merge tag 'x86-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A pile of x86 fixes:
- Prevent a memory leak in ioperm which was caused by the stupid
assumption that the exit cleanup is always called for current,
which is not the case when fork fails after taking a reference on
the ioperm bitmap.
- Fix an arithmething overflow in the DMA code on 32bit systems
- Fill gaps in the xstate copy with defaults instead of leaving them
uninitialized
- Revert: "Make __X32_SYSCALL_BIT be unsigned long" as it turned out
that existing user space fails to build"
* tag 'x86-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioperm: Prevent a memory leak when fork fails
x86/dma: Fix max PFN arithmetic overflow on 32 bit systems
copy_xstate_to_kernel(): don't leave parts of destination uninitialized
x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long"
14) Fix leak in inetdev_init(), from Yang Yingliang.
15) Don't try to use inet hash and unhash in l2tp code, results in
crashes. From Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
l2tp: add sk_family checks to l2tp_validate_socket
l2tp: do not use inet_hash()/inet_unhash()
net: qrtr: Allocate workqueue before kernel_bind
mptcp: remove msk from the token container at destruction time.
mptcp: fix race between MP_JOIN and close
mptcp: fix unblocking connect()
net/sched: act_ct: add nat mangle action only for NAT-conntrack
devinet: fix memleak in inetdev_init()
virtio_vsock: Fix race condition in virtio_transport_recv_pkt
drivers/net/ibmvnic: Update VNIC protocol version reporting
NFC: st21nfca: add missed kfree_skb() in an error path
neigh: fix ARP retransmit timer guard
bpf, selftests: Add a verifier test for assigning 32bit reg states to 64bit ones
bpf, selftests: Verifier bounds tests need to be updated
bpf: Fix a verifier issue when assigning 32bit reg states to 64bit ones
bpf: Fix use-after-free in fmod_ret check
net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()
net/mlx5e: Fix MLX5_TC_CT dependencies
net/mlx5e: Properly set default values when disabling adaptive moderation
net/mlx5e: Fix arch depending casting issue in FEC
...
Eric Dumazet [Fri, 29 May 2020 18:32:25 +0000 (11:32 -0700)]
l2tp: add sk_family checks to l2tp_validate_socket
syzbot was able to trigger a crash after using an ISDN socket
and fool l2tp.
Fix this by making sure the UDP socket is of the proper family.
BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78
Write of size 1 at addr ffff88808ed0c590 by task syz-executor.5/3018
Memory state around the buggy address: ffff88808ed0c480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88808ed0c500: 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88808ed0c580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^ ffff88808ed0c600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88808ed0c680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Fixes: 6b9f34239b00 ("l2tp: fix races in tunnel creation") Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Cc: Guillaume Nault <gnault@redhat.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 29 May 2020 18:20:53 +0000 (11:20 -0700)]
l2tp: do not use inet_hash()/inet_unhash()
syzbot recently found a way to crash the kernel [1]
Issue here is that inet_hash() & inet_unhash() are currently
only meant to be used by TCP & DCCP, since only these protocols
provide the needed hashinfo pointer.
L2TP uses a single list (instead of a hash table)
This old bug became an issue after commit 610236587600
("bpf: Add new cgroup attach type to enable sock modifications")
since after this commit, sk_common_release() can be called
while the L2TP socket is still considered 'hashed'.
Chris Lew [Thu, 28 May 2020 23:05:26 +0000 (16:05 -0700)]
net: qrtr: Allocate workqueue before kernel_bind
A null pointer dereference in qrtr_ns_data_ready() is seen if a client
opens a qrtr socket before qrtr_ns_init() can bind to the control port.
When the control port is bound, the ENETRESET error will be broadcasted
and clients will close their sockets. This results in DEL_CLIENT
packets being sent to the ns and qrtr_ns_data_ready() being called
without the workqueue being allocated.
Allocate the workqueue before setting sk_data_ready and binding to the
control port. This ensures that the work and workqueue structs are
allocated and initialized before qrtr_ns_data_ready can be called.
Fixes: 0c2204a4ad71 ("net: qrtr: Migrate nameservice to kernel from userspace") Signed-off-by: Chris Lew <clew@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 31 May 2020 04:39:13 +0000 (21:39 -0700)]
Merge branch 'mptcp-a-bunch-of-fixes'
Paolo Abeni says:
====================
mptcp: a bunch of fixes
This patch series pulls together a few bugfixes for MPTCP bug observed while
doing stress-test with apache bench - forced to use MPTCP and multiple
subflows.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 29 May 2020 15:43:31 +0000 (17:43 +0200)]
mptcp: remove msk from the token container at destruction time.
Currently we remote the msk from the token container only
via mptcp_close(). The MPTCP master socket can be destroyed
also via other paths (e.g. if not yet accepted, when shutting
down the listener socket). When we hit the latter scenario,
dangling msk references are left into the token container,
leading to memory corruption and/or UaF.
This change addresses the issue by moving the token removal
into the msk destructor.
Fixes: 79c0949e9a09 ("mptcp: Add key generation and token tree") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The MP_JOIN socket will be leaked. Additionally we can hit
UaF for the msk 'struct socket' referenced via the 'conn'
field.
This change try to address the issue introducing some
synchronization between the MP_JOIN 3whs and mptcp_close
via the join_list spinlock. If we detect the msk is closing
the MP_JOIN socket is closed, too.
Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 29 May 2020 15:43:29 +0000 (17:43 +0200)]
mptcp: fix unblocking connect()
Currently unblocking connect() on MPTCP sockets fails frequently.
If mptcp_stream_connect() is invoked to complete a previously
attempted unblocking connection, it will still try to create
the first subflow via __mptcp_socket_create(). If the 3whs is
completed and the 'can_ack' flag is already set, the latter
will fail with -EINVAL.
This change addresses the issue checking for pending connect and
delegating the completion to the first subflow. Additionally
do msk addresses and sk_state changes only when needed.
Fixes: 2303f994b3e1 ("mptcp: Associate MPTCP context with TCP socket") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
wenxu [Sat, 30 May 2020 05:54:51 +0000 (13:54 +0800)]
net/sched: act_ct: add nat mangle action only for NAT-conntrack
Currently add nat mangle action with comparing invert and orig tuple.
It is better to check IPS_NAT_MASK flags first to avoid non necessary
memcmp for non-NAT conntrack.
Signed-off-by: wenxu <wenxu@ucloud.cn> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Yingliang [Sat, 30 May 2020 03:34:33 +0000 (11:34 +0800)]
devinet: fix memleak in inetdev_init()
When devinet_sysctl_register() failed, the memory allocated
in neigh_parms_alloc() should be freed.
Fixes: 20e61da7ffcf ("ipv4: fail early when creating netdev named all or default") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The race condition is as follows:
Task1 Task2
===== =====
__sock_release virtio_transport_recv_pkt
__vsock_release vsock_find_bound_socket (found sk)
lock_sock_nested
vsock_remove_sock
sock_orphan
sk_set_socket(sk, NULL)
sk->sk_shutdown = SHUTDOWN_MASK
...
release_sock
lock_sock
virtio_transport_recv_connecting
sk->sk_socket->state (panic!)
The root cause is that vsock_find_bound_socket can't hold the lock_sock,
so there is a small race window between vsock_find_bound_socket() and
lock_sock(). If __vsock_release() is running in another task,
sk->sk_socket will be set to NULL inadvertently.
This fixes it by checking sk->sk_shutdown(suggested by Stefano) after
lock_sock since sk->sk_shutdown is set to SHUTDOWN_MASK under the
protection of lock_sock_nested.
Signed-off-by: Jia He <justin.he@arm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 30 May 2020 19:28:44 +0000 (12:28 -0700)]
Merge tag 'powerpc-5.7-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- a fix for the recent change to how we restore non-volatile GPRs,
which broke our emulation of reading from the DSCR (Data Stream
Control Register).
- a fix for the recent rewrite of interrupt/syscall exit in C, we need
to exclude KCOV from that code, otherwise it can lead to
unrecoverable faults.
Thanks to Daniel Axtens.
* tag 'powerpc-5.7-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Disable sanitisers for C syscall/interrupt entry/exit code
powerpc/64s: Fix restore of NV GPRs after facility unavailable exception
Linus Torvalds [Sat, 30 May 2020 19:26:21 +0000 (12:26 -0700)]
Merge tag 'gpio-v5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Here are some (very) late fixes for GPIO, none of them very serious
except the one tagged for stable for enabling IRQ on open drain lines:
- Fix probing of mvebu chips without PWM
- Fix error path on ida_get_simple() on the exar driver
- Notify userspace properly about line status changes when flags are
changed on lines.
- Fix a sleeping while holding spinlock in the mellanox driver.
- Fix return value of the PXA and Kona probe calls.
- Fix IRQ locking of open drain lines, it is fine to have IRQs on
open drain lines flagged for output"
* tag 'gpio-v5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: fix locking open drain IRQ lines
gpio: bcm-kona: Fix return value of bcm_kona_gpio_probe()
gpio: pxa: Fix return value of pxa_gpio_probe()
gpio: mlxbf2: Fix sleeping while holding spinlock
gpiolib: notify user-space about line status changes after flags are set
gpio: exar: Fix bad handling for ida_simple_get error path
gpio: mvebu: Fix probing for chips without PWM
Thomas Falcon [Thu, 28 May 2020 16:19:17 +0000 (11:19 -0500)]
drivers/net/ibmvnic: Update VNIC protocol version reporting
VNIC protocol version is reported in big-endian format, but it
is not byteswapped before logging. Fix that, and remove version
comparison as only one protocol version exists at this time.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Chuhong Yuan [Thu, 28 May 2020 10:20:37 +0000 (18:20 +0800)]
NFC: st21nfca: add missed kfree_skb() in an error path
st21nfca_tm_send_atr_res() misses to call kfree_skb() in an error path.
Add the missed function call to fix it.
Fixes: 1892bf844ea0 ("NFC: st21nfca: Adding P2P support to st21nfca in Initiator & Target mode") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Thu, 28 May 2020 07:15:13 +0000 (15:15 +0800)]
neigh: fix ARP retransmit timer guard
In commit 19e16d220f0a ("neigh: support smaller retrans_time settting")
we add more accurate control for ARP and NS. But for ARP I forgot to
update the latest guard in neigh_timer_handler(), then the next
retransmit would be reset to jiffies + HZ/2 if we set the retrans_time
less than 500ms. Fix it by setting the time_before() check to HZ/100.
IPv6 does not have this issue.
Reported-by: Jianwen Ji <jiji@redhat.com> Fixes: 19e16d220f0a ("neigh: support smaller retrans_time settting") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 29 May 2020 23:31:22 +0000 (16:31 -0700)]
Merge tag 'mlx5-fixes-2020-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2020-05-28
This series introduces some fixes to mlx5 driver.
v1->v2:
- Fix bad sha1, Jakub.
- Added one more patch by Pablo.
net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()
Nothing major, the only patch worth mentioning is the suspend/resume crash
fix by adding the missing pci device handlers, the fix is very straight
forward and as Dexuan already expressed, the patch is important for Azure
users to avoid crash on VM hibernation, patch is marked for -stable v4.6
below.
Conflict note:
('net/mlx5e: Fix MLX5_TC_CT dependencies') has a trivial one line conflict
with current net-next, which can be resolved by simply using the line from
net-next.
Please pull and let me know if there is any problem.
For -stable v4.6
('net/mlx5: Fix crash upon suspend/resume')
For -stable v5.6
('net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 29 May 2020 23:10:07 +0000 (16:10 -0700)]
Merge tag 'armsoc-fixes-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This time there is one fix for the error path in the mediatek cmdq
driver (used by their video driver) and a couple of devicetree fixes,
mostly for 32-bit ARM, and fairly harmless:
- On OMAP2 there were a few regressions in the ethernet drivers, one
of them leading to an external abort trap
- One Raspberry Pi version had a misconfigured LED
- Interrupts on Broadcom NSP were slightly misconfigured
- One i.MX6q board had issues with graphics mode setting
- On mmp3 there are some minor fixes that were submitted for v5.8
with a cc:stable tag, so I ended up picking them up here as well
- The Mediatek Video Codec needs to run at a higher frequency than
configured originally"
* tag 'armsoc-fixes-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: mmp3: Drop usb-nop-xceiv from HSIC phy
ARM: dts: mmp3-dell-ariel: Fix the SPI devices
ARM: dts: mmp3: Use the MMP3 compatible string for /clocks
ARM: dts: bcm: HR2: Fix PPI interrupt types
ARM: dts: bcm2835-rpi-zero-w: Fix led polarity
ARM: dts/imx6q-bx50v3: Set display interface clock parents
soc: mediatek: cmdq: return send msg error code
arm64: dts: mt8173: fix vcodec-enc clock
ARM: dts: Fix wrong mdio clock for dm814x
ARM: dts: am437x: fix networking on boards with ksz9031 phy
ARM: dts: am57xx: fix networking on boards with ksz9031 phy
Linus Torvalds [Fri, 29 May 2020 20:59:54 +0000 (13:59 -0700)]
Merge tag 'ceph-for-5.7-rc8' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Cache tiering and cap handling fixups, both marked for stable"
* tag 'ceph-for-5.7-rc8' of git://github.com/ceph/ceph-client:
ceph: flush release queue when handling caps for unknown inode
libceph: ignore pool overlay and cache logic on redirects
Linus Torvalds [Fri, 29 May 2020 20:41:33 +0000 (13:41 -0700)]
Merge tag 'iommu-fixes-v5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Two build fixes for issues introduced during the merge window
- A fix for a reference count leak in an error path of
iommu_group_alloc()
* tag 'iommu-fixes-v5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Fix reference count leak in iommu_group_alloc.
x86: Hide the archdata.iommu field behind generic IOMMU_API
ia64: Hide the archdata.iommu field behind generic IOMMU_API
Linus Torvalds [Fri, 29 May 2020 20:39:26 +0000 (13:39 -0700)]
Merge tag 'block-5.7-2020-05-29' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Two small fixes:
- Revert a block change that mixed up the return values for non-mq
devices
- NVMe poll race fix"
* tag 'block-5.7-2020-05-29' of git://git.kernel.dk/linux-block:
Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT"
nvme-pci: avoid race between nvme_reap_pending_cqes() and nvme_poll()
Linus Torvalds [Fri, 29 May 2020 20:35:45 +0000 (13:35 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Nothing profound here, just a last set of long standing bug fixes:
- Incorrect error unwind in qib and pvrdma
- User triggerable NULL pointer crash in mlx5 with ODP prefetch
- syzkaller RCU race in uverbs
- Rare double free crash in ipoib"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/ipoib: Fix double free of skb in case of multicast traffic in CM mode
RDMA/core: Fix double destruction of uobject
RDMA/pvrdma: Fix missing pci disable in pvrdma_pci_probe()
RDMA/mlx5: Fix NULL pointer dereference in destroy_prefetch_work
IB/qib: Call kobject_put() when kobject_init_and_add() fails
After the fix at insn 10 because we have 's32_min_value < 0' the following
step 11 now has 'smax_value=U32_MAX' where before we pulled the s32_max_value
bound into the smax_value as seen above in 11 with smax_value=2147483647.
In the original step 14 'smin_value=72057594021150720' this trips the logic
in the verifier function check_reg_sane_offset(),
if (smin >= BPF_MAX_VAR_OFF || smin <= -BPF_MAX_VAR_OFF) {
verbose(env, "value %lld makes %s pointer be out of bounds\n",
smin, reg_type_str[type]);
return false;
}
Specifically, the 'smin <= -BPF_MAX_VAR_OFF' check. But with the fix
at step 14 we have bounds 'smin_value=0' so the above check is not tripped
because BPF_MAX_VAR_OFF=1<<29.
We have a smin_value=0 here because at step 10 the smaller smin_value=0 means
the subtractions at steps 11 and 12 bring the smin_value negative.
Then the shift clears the top bit and smin_value is set to 0. Note we still
have the smax_value in the fixed code so any reads will fail. An alternative
would be to have reg_sane_check() do both smin and smax value tests.
To fix the test we can omit the 'r1 >>=8' at line 13. This will change the
err string, but keeps the intention of the test as suggseted by the title,
"check after truncation of boundary-crossing range". If the verifier logic
changes a different value is likely to be thrown in the error or the error
will no longer be thrown forcing this test to be examined. With this change
we see the new state at step 13.
Giving the expected out of bounds error, "value -4294967168 makes map_value
pointer be out of bounds" However, for unpriv case we see a different error
now because of the mixed signed bounds pointer arithmatic. This seems OK so
I've only added the unpriv_errstr for this. Another optino may have been to
do addition on r1 instead of subtraction but I favor the approach above
slightly.
In real test_verif_scale1 code, "w9 = 0" and "w2 = w9" are in
different basic blocks.
In the above, after "r6 += r2", r6 becomes a scalar, which eventually
caused the memory access error. The correct register state should be
a pkt pointer.
The inprecise register state starts at "w2 = w9".
The 32bit register w9 is 0, in __reg_assign_32_into_64(),
the 64bit reg->smax_value is assigned to be U32_MAX.
The 64bit reg->smin_value is 0 and the 64bit register
itself remains constant based on reg->var_off.
In adjust_ptr_min_max_vals(), the verifier checks for a known constant,
smin_val must be equal to smax_val. Since they are not equal,
the verifier decides r6 is a unknown scalar, which caused later failure.
The llvm10 does not have this issue as it generates different code:
w9 = 0 /* R9_w=inv0 */
r8 = *(u32 *)(r1 + 80) /* __sk_buff->data_end */
r7 = *(u32 *)(r1 + 76) /* __sk_buff->data */
......
r6 = r7 /* R6_w=pkt(id=0,off=0,r=0,imm=0) */
r6 += r9 /* R6_w=pkt(id=0,off=0,r=0,imm=0) */
r3 = r6 /* R3_w=pkt(id=0,off=0,r=0,imm=0) */
r3 += 14 /* R3_w=pkt(id=0,off=14,r=0,imm=0) */
if r3 > r8 goto end
...
To fix the above issue, we can include zero in the test condition for
assigning the s32_max_value and s32_min_value to their 64-bit equivalents
smax_value and smin_value.
Further, fix the condition to avoid doing zero extension bounds checks
when s32_min_value <= 0. This could allow for the case where bounds
32-bit bounds (-1,1) get incorrectly translated to (0,1) 64-bit bounds.
When in-fact the -1 min value needs to force U32_MAX bound.
Linus Torvalds [Fri, 29 May 2020 20:31:01 +0000 (13:31 -0700)]
Merge tag 'sound-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Only a few last-minute small fixes: the change in ALSA core hwdep is
about the undefined behavior of bit shift, which is almost harmless
but still worth to pick up quickly.
The rest are all device-specific fixes for HD-audio and USB-audio, and
safe to apply at the late stage"
* tag 'sound-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Add new codec supported for ALC287
ALSA: usb-audio: Quirks for Gigabyte TRX40 Aorus Master onboard audio
ALSA: usb-audio: mixer: volume quirk for ESS Technology Asus USB DAC
ALSA: hda/realtek - Add a model for Thinkpad T570 without DAC workaround
ALSA: hwdep: fix a left shifting 1 by 31 UB bug
Linus Torvalds [Fri, 29 May 2020 20:29:20 +0000 (13:29 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Two fixes for the new SM8150 and SM8250 Qualcomm clk drivers to fix a
randconfig build error and an incorrect parent mapping"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc: Fix parent for gpll0_out_even
clk: qcom: sm8250 gcc depends on QCOM_GDSC
prog->aux->trampoline = tr should be set only when prog is valid.
Otherwise prog freeing will try to put trampoline via prog->aux->trampoline,
but it may not point to a valid trampoline.
net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()
The drivers reports EINVAL to userspace through netlink on invalid meta
match. This is confusing since EINVAL is usually reserved for malformed
netlink messages. Replace it by more meaningful codes.
Vlad Buslov [Mon, 25 May 2020 13:57:51 +0000 (16:57 +0300)]
net/mlx5e: Fix MLX5_TC_CT dependencies
Change MLX5_TC_CT config dependencies to include MLX5_ESWITCH instead of
MLX5_CORE_EN && NET_SWITCHDEV, which are already required by MLX5_ESWITCH.
Without this change mlx5 fails to compile if user disables MLX5_ESWITCH
without also manually disabling MLX5_TC_CT.
Aya Levin [Mon, 13 Apr 2020 08:31:00 +0000 (11:31 +0300)]
net/mlx5e: Fix arch depending casting issue in FEC
Change type of active_fec to u32 to match the type expected by
mlx5e_get_fec_mode. Copy active_fec and configured_fec values to
unsigned long before preforming bitwise manipulations.
Take the same approach when configuring FEC over 50G link modes: copy
the policy into an unsigned long and only than preform bitwise
operations.
Maor Dickman [Sun, 24 May 2020 06:45:44 +0000 (09:45 +0300)]
net/mlx5e: Remove warning "devices are not on same switch HW"
On tunnel decap rule insertion, the indirect mechanism will attempt to
offload the rule on all uplink representors which will trigger the
"devices are not on same switch HW, can't offload forwarding" message
for the uplink which isn't on the same switch HW as the VF representor.
The above flow is valid and shouldn't cause warning message,
fix by removing the warning and only report this flow using extack.
1) Several fixes for ESP gro/gso in transport and beet mode when
IPv6 extension headers are present. From Xin Long.
2) Fix a wrong comment on XFRMA_OFFLOAD_DEV.
From Antony Antony.
3) Fix sk_destruct callback handling on ESP in TCP encapsulation.
From Sabrina Dubroca.
4) Fix a use after free in xfrm_output_gso when used with vxlan.
From Xin Long.
5) Fix secpath handling of VTI when used wiuth IPCOMP.
From Xin Long.
6) Fix an oops when deleting a x-netns xfrm interface.
From Nicolas Dichtel.
7) Fix a possible warning on policy updates. We had a case where it was
possible to add two policies with the same lookup keys.
From Xin Long.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* tag 'drm-fixes-2020-05-29-1' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Fix potential integer wraparound resulting in a hang
drm/amd/display: drop cursor position check in atomic test
gpu/drm: Ingenic: Fix opaque pointer casted to wrong type
gpu/drm: ingenic: Fix bogus crtc_atomic_check callback
Fix several issues in the previous gfs2_find_jhead fix:
* When updating @blocks_submitted, @block refers to the first block block not
submitted yet, not the last block submitted, so fix an off-by-one error.
* We want to ensure that @blocks_submitted is far enough ahead of @blocks_read
to guarantee that there is in-flight I/O. Otherwise, we'll eventually end up
waiting for pages that haven't been submitted, yet.
* It's much easier to compare the number of blocks added with the number of
blocks submitted to limit the maximum bio size.
* Even with bio chaining, we can keep adding blocks until we reach the maximum
bio size, as long as we stop at a page boundary. This simplifies the logic.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Helge Deller [Thu, 28 May 2020 20:29:25 +0000 (22:29 +0200)]
parisc: Fix kernel panic in mem_init()
The Debian kernel v5.6 triggers this kernel panic:
Kernel panic - not syncing: Bad Address (null pointer deref?)
Bad Address (null pointer deref?): Code=26 (Data memory access rights trap) at addr 0000000000000000
CPU: 0 PID: 0 Comm: swapper Not tainted 5.6.0-2-parisc64 #1 Debian 5.6.14-1
IAOQ[0]: mem_init+0xb0/0x150
IAOQ[1]: mem_init+0xb4/0x150
RP(r2): start_kernel+0x6c8/0x1190
Backtrace:
[<0000000040101ab4>] start_kernel+0x6c8/0x1190
[<0000000040108574>] start_parisc+0x158/0x1b8
on a HP-PARISC rp3440 machine with this memory layout:
Memory Ranges:
0) Start 0x0000000000000000 End 0x000000003fffffff Size 1024 MB
1) Start 0x0000004040000000 End 0x00000040ffdfffff Size 3070 MB
Fix the crash by avoiding virt_to_page() and similar functions in
mem_init() until the memory zones have been fully set up.
Qiushi Wu [Wed, 27 May 2020 21:00:19 +0000 (16:00 -0500)]
iommu: Fix reference count leak in iommu_group_alloc.
kobject_init_and_add() takes reference even when it fails.
Thus, when kobject_init_and_add() returns an error,
kobject_put() must be called to properly clean up the kobject.
Linus Walleij [Wed, 27 May 2020 14:07:58 +0000 (16:07 +0200)]
gpio: fix locking open drain IRQ lines
We provided the right semantics on open drain lines being
by definition output but incidentally the irq set up function
would only allow IRQs on lines that were "not output".
Fix the semantics to allow output open drain lines to be used
for IRQs.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Hans Verkuil <hverkuil@xs4all.nl> Cc: Russell King <linux@armlinux.org.uk> Cc: stable@vger.kernel.org # v5.3+ Link: https://lore.kernel.org/r/20200527140758.162280-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This is caused by __sanitizer_cov_trace_pc() causing an SLB fault
after MSR[RI] has been cleared by __hard_EE_RI_disable(), which we
can not recover from.
Do not instrument the new syscall/interrupt entry/exit code with KCOV,
GCOV or UBSAN.
Reported-by: syzbot-ppc64 <ozlabsyz@au1.ibm.com> Fixes: 68b34588e202 ("powerpc/64/sycall: Implement syscall entry/exit logic in C") Signed-off-by: Daniel Axtens <dja@axtens.net> Acked-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This occurred when sending a v4 skb over vxlan6 over ipsec, in which case
skb->protocol == htons(ETH_P_IPV6) while skb->sk->sk_family == AF_INET in
xfrm_local_error(). Then it will go to xfrm6_local_error() where it tries
to get ipv6 info from a ipv4 sk.
This issue was actually fixed by Commit 628e341f319f ("xfrm: make local
error reporting more robust"), but brought back by Commit 844d48746e4b
("xfrm: choose protocol family by skb protocol").
So to fix it, we should call xfrm6_local_error() only when skb->protocol
is htons(ETH_P_IPV6) and skb->sk->sk_family is AF_INET6.
Fixes: 844d48746e4b ("xfrm: choose protocol family by skb protocol") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Eric Dumazet [Thu, 28 May 2020 21:57:47 +0000 (14:57 -0700)]
net: be more gentle about silly gso requests coming from user
Recent change in virtio_net_hdr_to_skb() broke some packetdrill tests.
When --mss=XXX option is set, packetdrill always provide gso_type & gso_size
for its inbound packets, regardless of packet size.
if (packet->tcp && packet->mss) {
if (packet->ipv4)
gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV4;
else
gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV6;
gso.gso_size = packet->mss;
}
Since many other programs could do the same, relax virtio_net_hdr_to_skb()
to no longer return an error, but instead ignore gso settings.
This keeps Willem intent to make sure no malicious packet could
reach gso stack.
Note that TCP stack has a special logic in tcp_set_skb_tso_segs()
to clear gso_size for small packets.
Fixes: 6dd912f82680 ("net: check untrusted gso_size at kernel entry") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jonas Falkevik [Wed, 27 May 2020 09:56:40 +0000 (11:56 +0200)]
sctp: check assoc before SCTP_ADDR_{MADE_PRIM, ADDED} event
Make sure SCTP_ADDR_{MADE_PRIM,ADDED} are sent only for associations
that have been established.
These events are described in rfc6458#section-6.1
SCTP_PEER_ADDR_CHANGE:
This tag indicates that an address that is
part of an existing association has experienced a change of
state (e.g., a failure or return to service of the reachability
of an endpoint via a specific transport address).
Signed-off-by: Jonas Falkevik <jonas.falkevik@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jay Lang [Sun, 24 May 2020 16:27:39 +0000 (12:27 -0400)]
x86/ioperm: Prevent a memory leak when fork fails
In the copy_process() routine called by _do_fork(), failure to allocate
a PID (or further along in the function) will trigger an invocation to
exit_thread(). This is done to clean up from an earlier call to
copy_thread_tls(). Naturally, the child task is passed into exit_thread(),
however during the process, io_bitmap_exit() nullifies the parent's
io_bitmap rather than the child's.
As copy_thread_tls() has been called ahead of the failure, the reference
count on the calling thread's io_bitmap is incremented as we would expect.
However, io_bitmap_exit() doesn't accept any arguments, and thus assumes
it should trash the current thread's io_bitmap reference rather than the
child's. This is pretty sneaky in practice, because in all instances but
this one, exit_thread() is called with respect to the current task and
everything works out.
A determined attacker can issue an appropriate ioctl (i.e. KDENABIO) to
get a bitmap allocated, and force a clone3() syscall to fail by passing
in a zeroed clone_args structure. The kernel handles the erroneous struct
and the buggy code path is followed, and even though the parent's reference
to the io_bitmap is trashed, the child still holds a reference and thus
the structure will never be freed.
Fix this by tweaking io_bitmap_exit() and its subroutines to accept a
task_struct argument which to operate on.
Fixes: ea5f1cd7ab49 ("x86/ioperm: Remove bitmap if all permissions dropped") Signed-off-by: Jay Lang <jaytlang@mit.edu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable#@vger.kernel.org Link: https://lkml.kernel.org/r/20200524162742.253727-1-jaytlang@mit.edu
projects / linux-stable / log