Merge tag 'core_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull syscall tracing fix from Borislav Petkov:
"Fix the seccomp syscall rewriting so that trace and audit see the
rewritten syscall number, from Kees Cook"
* tag 'core_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
core/entry: Report syscall correctly for trace and audit
- Make percpu-rwsem operations on the semaphore's ->read_count
IRQ-safe because it can be used in an IRQ context (Hou Tao)"
* tag 'locking_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/percpu-rwsem: Use this_cpu_{inc,dec}() for read_count
locking/lockdep: Fix "USED" <- "IN-NMI" inversions
Merge tag 'efi-urgent-for-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fix from Borislav Petkov:
"Ensure that the EFI bootloader control module only probes successfully
on systems that support the EFI SetVariable runtime service"
[ Tag and commit from Ard Biesheuvel, forwarded by Borislav ]
* tag 'efi-urgent-for-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: efibc: check for efivars write capability
Merge tag 'x86_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- A defconfig fix (Daniel Díaz)
- Disable relocation relaxation for the compressed kernel when not
built as -pie as in that case kernels built with clang and linked
with LLD fail to boot due to the linker optimizing some instructions
in non-PIE form; the gory details in the commit message (Arvind
Sankar)
- A fix for the "bad bp value" warning issued by the frame-pointer
unwinder (Josh Poimboeuf)
* tag 'x86_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/fp: Fix FP unwinding in ret_from_fork
x86/boot/compressed: Disable relocation relaxation
x86/defconfigs: Explicitly unset CONFIG_64BIT in i386_defconfig
Merge tag 'libnvdimm-fixes-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A handful of fixes to address a string of mistakes in the mechanism
for device-mapper to determine if its component devices are dax
capable.
- Fix an original bug in device-mapper table reference counting when
interrogating dax capability in the component device. This bug was
hidden by the following bug.
- Fix device-mapper to use the proper helper (dax_supported() instead
of the leaf helper generic_fsdax_supported()) to determine dax
operation of a stacked block device configuration. The original
implementation is only valid for one level of dax-capable block
device stacking. This bug was discovered while fixing the below
regression.
- Fix an infinite recursion regression introduced by broken attempts
to quiet the generic_fsdax_supported() path and make it bail out
before logging "dax capability not found" errors"
* tag 'libnvdimm-fixes-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Fix stack overflow when mounting fsdax pmem device
dm: Call proper helper to determine dax support
dm/dax: Fix table reference counts
Merge tag 'riscv-for-linus-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for a lockdep issue to avoid an asserting triggering during
early boot. There shouldn't be any incorrect behavior as the system
isn't concurrent at the time.
- The addition of a missing fence when installing early fixmap
mappings.
- A corretion to the K210 device tree's interrupt map.
- A fix for M-mode timer handling on the K210.
* tag 'riscv-for-linus-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Resurrect the MMIO timer implementation for M-mode systems
riscv: Fix Kendryte K210 device tree
riscv: Add sfence.vma after early page table changes
RISC-V: Take text_mutex in ftrace_init_nop()
Merge tag 'tty-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial/fbcon fixes from Greg KH:
"Here are some small tty/serial and one more fbcon fix.
They include:
- serial core locking regression fixes
- new device ids for 8250_pci driver
- fbcon fix for syzbot found issue
All have been in linux-next with no reported issues"
* tag 'tty-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
fbcon: Fix user font detection test at fbcon_resize().
serial: 8250_pci: Add Realtek 816a and 816b
serial: core: fix console port-lock regression
serial: core: fix port-lock initialisation
Merge tag 'edac_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
"Two fixes for resulting from CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
experiments:
- complete a previous fix to reset a local structure containing
scanned system data properly so that the driver rescans, as it
should, on a second load.
- address a refcount underflow due to not paying attention to the
driver whitelest on unregister"
* tag 'edac_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/ghes: Check whether the driver is on the safe list correctly
EDAC/ghes: Clear scanned data on unload
Merge tag 'kbuild-fixes-v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
"Fix qconf warnings and revive help message"
* tag 'kbuild-fixes-v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: qconf: revive help message in the info view
kconfig: qconf: fix incomplete type 'struct gstr' warning
kconfig: qconf: use delete[] instead of delete to free array (again)
Adrian Huang [Thu, 17 Sep 2020 11:15:49 +0000 (19:15 +0800)]
dax: Fix stack overflow when mounting fsdax pmem device
When mounting fsdax pmem device, commit 6180bb446ab6 ("dax: fix
detection of dax support for non-persistent memory block devices")
introduces the stack overflow [1][2]. Here is the call path for
mounting ext4 file system:
ext4_fill_super
bdev_dax_supported
__bdev_dax_supported
dax_supported
generic_fsdax_supported
__generic_fsdax_supported
bdev_dax_supported
The call path leads to the infinite calling loop, so we cannot
call bdev_dax_supported() in __generic_fsdax_supported(). The sanity
checking of the variable 'dax_dev' is moved prior to the two
bdev_dax_pgoff() checks [3][4].
Fixes: 6180bb446ab6 ("dax: fix detection of dax support for non-persistent memory block devices") Reported-by: Yi Zhang <yi.zhang@redhat.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Adrian Huang <ahuang12@lenovo.com> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> Cc: Coly Li <colyli@suse.de> Cc: Ira Weiny <ira.weiny@intel.com> Cc: John Pittman <jpittman@redhat.com> Link: https://lore.kernel.org/r/20200917111549.6367-1-adrianhuang0701@gmail.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jan Kara [Sun, 20 Sep 2020 15:54:42 +0000 (08:54 -0700)]
dm: Call proper helper to determine dax support
DM was calling generic_fsdax_supported() to determine whether a device
referenced in the DM table supports DAX. However this is a helper for "leaf" device drivers so that
they don't have to duplicate common generic checks. High level code
should call dax_supported() helper which that calls into appropriate
helper for the particular device. This problem manifested itself as
kernel messages:
dm-3: error: dax access failed (-95)
when lvm2-testsuite run in cases where a DM device was stacked on top of
another DM device.
Fixes: 7bf7eac8d648 ("dax: Arrange for dax_supported check to span multiple devices") Cc: <stable@vger.kernel.org> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Mike Snitzer <snitzer@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/160061715195.13131.5503173247632041975.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 18 Sep 2020 19:51:15 +0000 (12:51 -0700)]
dm/dax: Fix table reference counts
A recent fix to the dm_dax_supported() flow uncovered a latent bug. When
dm_get_live_table() fails it is still required to drop the
srcu_read_lock(). Without this change the lvm2 test-suite triggers this
warning:
# lvm2-testsuite --only pvmove-abort-all.sh
WARNING: lock held when returning to user space!
5.9.0-rc5+ #251 Tainted: G OE
------------------------------------------------
lvm/1318 is leaving the kernel with locks still held!
1 lock held by lvm/1318:
#0: ffff9372abb5a340 (&md->io_barrier){....}-{0:0}, at: dm_get_live_table+0x5/0xb0 [dm_mod]
Fixes: 7bf7eac8d648 ("dax: Arrange for dax_supported check to span multiple devices") Cc: <stable@vger.kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Reported-by: Adrian Huang <ahuang12@lenovo.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Adrian Huang <ahuang12@lenovo.com> Link: https://lore.kernel.org/r/160045867590.25663.7548541079217827340.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
kconfig: qconf: revive help message in the info view
Since commit 68fd110b3e7e ("kconfig: qconf: remove redundant help in
the info view"), the help message is no longer displayed.
I intended to drop duplicated "Symbol:", "Type:", but precious info
about help and reverse dependencies was lost too.
Revive it now.
"defined at" is contained in menu_get_ext_help(), so I made sure
to not display it twice.
Fixes: 68fd110b3e7e ("kconfig: qconf: remove redundant help in the info view") Reported-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
kconfig: qconf: fix incomplete type 'struct gstr' warning
"make HOSTCXX=clang++ xconfig" reports the following:
HOSTCXX scripts/kconfig/qconf.o
In file included from scripts/kconfig/qconf.cc:23:
In file included from scripts/kconfig/lkc.h:15:
scripts/kconfig/lkc_proto.h:26:13: warning: 'get_relations_str' has C-linkage specified, but returns incomplete type 'struct gstr' which could be incompatible with C [-Wreturn-type-c-linkage]
struct gstr get_relations_str(struct symbol **sym_arr, struct list_head *head);
^
Currently, get_relations_str() is declared before the struct gstr
definition.
Move all declarations of menu.c functions below.
BTW, some are declared in lkc.h and some in lkc_proto.h, but the
difference is unclear. I guess some refactoring is needed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Boris Kolpackov <boris@codesynthesis.com>
Subsystems affected by this patch series: mailmap, mm/hotfixes,
mm/thp, mm/memory-hotplug, misc, kcsan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kcsan: kconfig: move to menu 'Generic Kernel Debugging Instruments'
fs/fs-writeback.c: adjust dirtytime_interval_handler definition to match prototype
stackleak: let stack_erasing_sysctl take a kernel pointer buffer
ftrace: let ftrace_enable_sysctl take a kernel pointer buffer
mm/memory_hotplug: drain per-cpu pages again during memory offline
selftests/vm: fix display of page size in map_hugetlb
mm/thp: fix __split_huge_pmd_locked() for migration PMD
kprobes: fix kill kprobe which has been marked as gone
tmpfs: restore functionality of nr_inodes=0
mlock: fix unevictable_pgs event counts on THP
mm: fix check_move_unevictable_pages() on THP
mm: migration of hugetlbfs page skip memcg
ksm: reinstate memcg charge on copied pages
mailmap: add older email addresses for Kees Cook
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Another bunch of fixes for I2C.
Jean's i801 patch is a cleanup on top of Volker's i801 patch, but it
will make dependency handling much easier if those two go together"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mxs: use MXS_DMA_CTRL_WAIT4END instead of DMA_CTRL_ACK
i2c: mediatek: Send i2c master code at more than 1MHz
i2c: mediatek: Fix generic definitions for bus frequency
i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()
i2c: i801: Simplify the suspend callback
i2c: i801: Fix resume bug
i2c: aspeed: Mask IRQ status to relevant bits
RISC-V: Resurrect the MMIO timer implementation for M-mode systems
The K210 doesn't implement rdtime in M-mode, and since that's where Linux runs
in the NOMMU systems that means we can't use rdtime. The K210 is the only
system that anyone is currently running NOMMU or M-mode on, so here we're just
inlining the timer read directly.
This also adds the CLINT driver as an !MMU dependency, as it's currently the
only timer driver availiable for these systems and without it we get a build
failure for some configurations.
Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Damien Le Moal [Wed, 16 Sep 2020 07:59:41 +0000 (16:59 +0900)]
riscv: Fix Kendryte K210 device tree
The Kendryte K210 SoC CLINT is compatible with Sifive clint v0
(sifive,clint0). Fix the Kendryte K210 device tree clint entry to be
inline with the sifive timer definition documented in
Documentation/devicetree/bindings/timer/sifive,clint.yaml.
The device tree clint entry is renamed similarly to u-boot device tree
definition to improve compatibility with u-boot defined device tree.
To ensure correct initialization, the interrup-cells attribute is added
and the interrupt-extended attribute definition fixed.
This fixes boot failures with Kendryte K210 SoC boards.
Note that the clock referenced is kept as K210_CLK_ACLK, which does not
necessarilly match the clint MTIME increment rate. This however does not
seem to cause any problem for now.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
fs/fs-writeback.c: adjust dirtytime_interval_handler definition to match prototype
Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer. Adjust the
definition of dirtytime_interval_handler to match its prototype in
linux/writeback.h which fixes the following sparse error/warning:
fs/fs-writeback.c:2189:50: warning: incorrect type in argument 3 (different address spaces)
fs/fs-writeback.c:2189:50: expected void *
fs/fs-writeback.c:2189:50: got void [noderef] __user *buffer
fs/fs-writeback.c:2184:5: error: symbol 'dirtytime_interval_handler' redeclared with different type (incompatible argument 3 (different address spaces)):
fs/fs-writeback.c:2184:5: int extern [addressable] [signed] [toplevel] dirtytime_interval_handler( ... )
fs/fs-writeback.c: note: in included file:
./include/linux/writeback.h:374:5: note: previously declared as:
./include/linux/writeback.h:374:5: int extern [addressable] [signed] [toplevel] dirtytime_interval_handler( ... )
Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Link: https://lkml.kernel.org/r/20200907093140.13434-1-tklauser@distanz.ch Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
stackleak: let stack_erasing_sysctl take a kernel pointer buffer
Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer. Adjust the
signature of stack_erasing_sysctl to match ctl_table.proc_handler which
fixes the following sparse warning:
kernel/stackleak.c:31:50: warning: incorrect type in argument 3 (different address spaces)
kernel/stackleak.c:31:50: expected void *
kernel/stackleak.c:31:50: got void [noderef] __user *buffer
Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Link: https://lkml.kernel.org/r/20200907093253.13656-1-tklauser@distanz.ch Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ftrace: let ftrace_enable_sysctl take a kernel pointer buffer
Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer. Adjust the
signature of ftrace_enable_sysctl to match ctl_table.proc_handler which
fixes the following sparse warning:
kernel/trace/ftrace.c:7544:43: warning: incorrect type in argument 3 (different address spaces)
kernel/trace/ftrace.c:7544:43: expected void *
kernel/trace/ftrace.c:7544:43: got void [noderef] __user *buffer
Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Link: https://lkml.kernel.org/r/20200907093207.13540-1-tklauser@distanz.ch Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Tatashin [Sat, 19 Sep 2020 04:20:31 +0000 (21:20 -0700)]
mm/memory_hotplug: drain per-cpu pages again during memory offline
There is a race during page offline that can lead to infinite loop:
a page never ends up on a buddy list and __offline_pages() keeps
retrying infinitely or until a termination signal is received.
Thread#1 - a new process:
load_elf_binary
begin_new_exec
exec_mmap
mmput
exit_mmap
tlb_finish_mmu
tlb_flush_mmu
release_pages
free_unref_page_list
free_unref_page_prepare
set_pcppage_migratetype(page, migratetype);
// Set page->index migration type below MIGRATE_PCPTYPES
Thread#2 - hot-removes memory
__offline_pages
start_isolate_page_range
set_migratetype_isolate
set_pageblock_migratetype(page, MIGRATE_ISOLATE);
Set migration type to MIGRATE_ISOLATE-> set
drain_all_pages(zone);
// drain per-cpu page lists to buddy allocator.
Thread#1 - continue
free_unref_page_commit
migratetype = get_pcppage_migratetype(page);
// get old migration type
list_add(&page->lru, &pcp->lists[migratetype]);
// add new page to already drained pcp list
Thread#2
Never drains pcp again, and therefore gets stuck in the loop.
The fix is to try to drain per-cpu lists again after
check_pages_isolated_cb() fails.
Ralph Campbell [Sat, 19 Sep 2020 04:20:24 +0000 (21:20 -0700)]
mm/thp: fix __split_huge_pmd_locked() for migration PMD
A migrating transparent huge page has to already be unmapped. Otherwise,
the page could be modified while it is being copied to a new page and data
could be lost. The function __split_huge_pmd() checks for a PMD migration
entry before calling __split_huge_pmd_locked() leading one to think that
__split_huge_pmd_locked() can handle splitting a migrating PMD.
However, the code always increments the page->_mapcount and adjusts the
memory control group accounting assuming the page is mapped.
Also, if the PMD entry is a migration PMD entry, the call to
is_huge_zero_pmd(*pmd) is incorrect because it calls pmd_pfn(pmd) instead
of migration_entry_to_pfn(pmd_to_swp_entry(pmd)). Fix these problems by
checking for a PMD migration entry.
Fixes: 84c3fc4e9c56 ("mm: thp: check pmd migration entry in common path") Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> [4.14+] Link: https://lkml.kernel.org/r/20200903183140.19055-1-rcampbell@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Muchun Song [Sat, 19 Sep 2020 04:20:21 +0000 (21:20 -0700)]
kprobes: fix kill kprobe which has been marked as gone
If a kprobe is marked as gone, we should not kill it again. Otherwise, we
can disarm the kprobe more than once. In that case, the statistics of
kprobe_ftrace_enabled can unbalance which can lead to that kprobe do not
work.
Fixes: e8386a0cb22f ("kprobes: support probing module __exit function") Co-developed-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Song Liu <songliubraving@fb.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200822030055.32383-1-songmuchun@bytedance.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit e809d5f0b5c9 ("tmpfs: per-superblock i_ino support") made changes
to shmem_reserve_inode() in mm/shmem.c, however the original test for
(sbinfo->max_inodes) got dropped. This causes mounting tmpfs with option
nr_inodes=0 to fail:
# mount -ttmpfs -onr_inodes=0 none /ext0
mount: /ext0: mount(2) system call failed: Cannot allocate memory.
This patch restores the nr_inodes=0 functionality.
Fixes: e809d5f0b5c9 ("tmpfs: per-superblock i_ino support") Signed-off-by: Byron Stanoszek <gandalf@winds.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Chris Down <chris@chrisdown.name> Link: https://lkml.kernel.org/r/20200902035715.16414-1-gandalf@winds.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5.8 commit 5d91f31faf8e ("mm: swap: fix vmstats for huge page") has
established that vm_events should count every subpage of a THP, including
unevictable_pgs_culled and unevictable_pgs_rescued; but
lru_cache_add_inactive_or_unevictable() was not doing so for
unevictable_pgs_mlocked, and mm/mlock.c was not doing so for
unevictable_pgs mlocked, munlocked, cleared and stranded.
Fix them; but THPs don't go the pagevec way in mlock.c, so no fixes needed
on that path.
Fixes: 5d91f31faf8e ("mm: swap: fix vmstats for huge page") Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Yang Shi <shy828301@gmail.com> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Qian Cai <cai@lca.pw> Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008301408230.5954@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
check_move_unevictable_pages() is used in making unevictable shmem pages
evictable: by shmem_unlock_mapping(), drm_gem_check_release_pagevec() and
i915/gem check_release_pagevec(). Those may pass down subpages of a huge
page, when /sys/kernel/mm/transparent_hugepage/shmem_enabled is "force".
That does not crash or warn at present, but the accounting of vmstats
unevictable_pgs_scanned and unevictable_pgs_rescued is inconsistent:
scanned being incremented on each subpage, rescued only on the head (since
tails already appear evictable once the head has been updated).
5.8 commit 5d91f31faf8e ("mm: swap: fix vmstats for huge page") has
established that vm_events in general (and unevictable_pgs_rescued in
particular) should count every subpage: so follow that precedent here.
Do this in such a way that if mem_cgroup_page_lruvec() is made stricter
(to check page->mem_cgroup is always set), no problem: skip the tails
before calling it, and add thp_nr_pages() to vmstats on the head.
Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Yang Shi <shy828301@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Qian Cai <cai@lca.pw> Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008301405000.5954@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
hugetlbfs pages do not participate in memcg: so although they do find most
of migrate_page_states() useful, it would be better if they did not call
into mem_cgroup_migrate() - where Qian Cai reported that LTP's
move_pages12 triggers the warning in Alex Shi's prospective commit
"mm/memcg: warning on !memcg after readahead page charged".
Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxch.org> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Qian Cai <cai@lca.pw> Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008301359460.5954@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: fixes to past from future testing".
Here's a set of independent fixes against 5.9-rc2: prompted by
testing Alex Shi's "warning on !memcg" and lru_lock series, but
I think fit for 5.9 - though maybe only the first for stable.
This patch (of 5):
In 5.8 some instances of memcg charging in do_swap_page() and unuse_pte()
were removed, on the understanding that swap cache is now already charged
at those points; but a case was missed, when ksm_might_need_to_copy() has
decided it must allocate a substitute page: such pages were never charged.
Fix it inside ksm_might_need_to_copy().
This was discovered by Alex Shi's prospective commit "mm/memcg: warning on
!memcg after readahead page charged".
But there is a another surprise: this also fixes some rarer uncharged
PageAnon cases, when KSM is configured in, but has never been activated.
ksm_might_need_to_copy()'s anon_vma->root and linear_page_index() check
sometimes catches a case which would need to have been copied if KSM were
turned on. Or that's my optimistic interpretation (of my own old code),
but it leaves some doubt as to whether everything is working as intended
there - might it hint at rare anon ptes which rmap cannot find? A
question not easily answered: put in the fix for missed memcg charges.
Cc; Matthew Wilcox <willy@infradead.org>
Fixes: 4c6355b25e8b ("mm: memcontrol: charge swapin pages on instantiation") Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Qian Cai <cai@lca.pw> Cc: <stable@vger.kernel.org> [5.8] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008301343270.5954@eggly.anvils Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008301358020.5954@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 's390-5.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix order in trace_hardirqs_off_caller() to make locking state
consistent even if the IRQ tracer calls into lockdep again. Touches
common code. Acked-by Peter Zijlstra.
- Correctly handle secure storage violation exception to avoid kernel
panic triggered by user space misbehaviour.
- Switch the idle->seqcount over to using raw_write_*() to avoid
"suspicious RCU usage".
- Fix memory leaks on hard unplug in pci code.
- Use kvmalloc instead of kmalloc for larger allocations in zcrypt.
- Add few missing __init annotations to static functions to avoid
section mismatch complains when functions are not inlined.
* tag 's390-5.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: add 3f program exception handler
lockdep: fix order in trace_hardirqs_off_caller()
s390/pci: fix leak of DMA tables on hard unplug
s390/init: add missing __init annotations
s390/zcrypt: fix kmalloc 256k failure
s390/idle: fix suspicious RCU usage
i2c: mxs: use MXS_DMA_CTRL_WAIT4END instead of DMA_CTRL_ACK
The driver-specific usage of the DMA_CTRL_ACK flag was replaced with a
custom flag in commit ceeeb99cd821 ("dmaengine: mxs: rename custom flag"),
but i2c-mxs was not updated to use the new flag, completely breaking I2C
transactions using DMA.
Qii Wang [Thu, 17 Sep 2020 11:55:42 +0000 (19:55 +0800)]
i2c: mediatek: Send i2c master code at more than 1MHz
The master code needs to being sent when the speed is more than
I2C_MAX_FAST_MODE_PLUS_FREQ, not I2C_MAX_FAST_MODE_FREQ in the
latest I2C-bus specification and user manual.
Signed-off-by: Qii Wang <qii.wang@mediatek.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Qii Wang [Thu, 17 Sep 2020 11:55:41 +0000 (19:55 +0800)]
i2c: mediatek: Fix generic definitions for bus frequency
The max frequency of mediatek i2c controller driver is
I2C_MAX_HIGH_SPEED_MODE_FREQ, not I2C_MAX_FAST_MODE_PLUS_FREQ.
Fix it.
Fixes: 90224e6468e1 ("i2c: drivers: Use generic definitions for bus frequencies") Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Allow CPUs affected by erratum 1418040 to come online late
(previously we only fixed the other case - CPUs not affected by the
erratum coming up late).
- Fix branch offset in BPF JIT.
- Defer the stolen time initialisation to the CPU online time from the
CPU starting time to avoid a (sleep-able) memory allocation in an
atomic context.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: paravirt: Initialize steal time when cpu is online
arm64: bpf: Fix branch offset in JIT
arm64: Allow CPUs unffected by ARM erratum 1418040 to come in late
Merge tag 'powerpc-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.9:
- Opt us out of the DEBUG_VM_PGTABLE support for now as it's causing
crashes.
- Fix a long standing bug in our DMA mask handling that was hidden
until recently, and which caused problems with some drivers.
- Fix a boot failure on systems with large amounts of RAM, and no
hugepage support and using Radix MMU, only seen in the lab.
- A few other minor fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Gautham R. Shenoy,
Hari Bathini, Ira Weiny, Nick Desaulniers, Shirisha Ganta, Vaibhav
Jain, and Vaidyanathan Srinivasan"
* tag 'powerpc-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/papr_scm: Limit the readability of 'perf_stats' sysfs attribute
cpuidle: pseries: Fix CEDE latency conversion from tb to us
powerpc/dma: Fix dma_map_ops::get_required_mask
Revert "powerpc/build: vdso linker warning for orphan sections"
powerpc/mm: Remove DEBUG_VM_PGTABLE support on powerpc
selftests/powerpc: Skip PROT_SAO test in guests/LPARS
powerpc/book3s64/radix: Fix boot failure with large amount of guest memory
Merge tag 'pm-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add a new CPU ID to the RAPL power capping driver and prevent
the ACPI processor idle driver from triggering RCU-lockdep complaints.
Specifics:
- Add support for the Lakefield chip to the RAPL power capping driver
(Ricardo Neri).
- Modify the ACPI processor idle driver to prevent it from triggering
RCU-lockdep complaints which has started to happen after recent
changes in that area (Peter Zijlstra)"
* tag 'pm-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Take over RCU-idle for C3-BM idle
cpuidle: Allow cpuidle drivers to take over RCU-idle
ACPI: processor: Use CPUIDLE_FLAG_TLB_FLUSHED
ACPI: processor: Use CPUIDLE_FLAG_TIMER_STOP
powercap: RAPL: Add support for Lakefield
Merge tag 'sound-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here is a collection of fixes for 5.9. All look small and are nothing
scary.
The majority of changes are about ASoC driver- specific fixes, while
there are a couple of ASoC core fixes (DAI lookup and lockdep stuff)
and usual HD-audio quirks"
* tag 'sound-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: hda/realtek - The Mic on a RedmiBook doesn't work
ASoC: tlv320adcx140: Wake up codec before accessing register
ASoC: core: Do not cleanup uninitialized dais on soc_pcm_open failure
ALSA: hda: fixup headset for ASUS GX502 laptop
ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN Converter9 2-in-1
ASoC: Intel: haswell: Fix power transition refactor
ASoC: tlv320adcx140: Fix accessing uninitialized adcx140->dev
ASoC: wm8994: Ensure the device is resumed in wm89xx_mic_detect functions
ASoC: wm8994: Skip setting of the WM8994_MICBIAS register for WM1811
ASoC: meson: axg-toddr: fix channel order on g12 platforms
ASoC: soc-core: add snd_soc_find_dai_with_mutex()
ASoC: qcom: common: Fix refcount imbalance on error
ASoC: rt700: Fix return check for devm_regmap_init_sdw()
ASoC: rt715: Fix return check for devm_regmap_init_sdw()
ASoC: rt711: Fix return check for devm_regmap_init_sdw()
ASoC: rt1308-sdw: Fix return check for devm_regmap_init_sdw()
ASoC: max98373: Fix return check for devm_regmap_init_sdw()
ASoC: ti: fixup ams_delta_mute() function name
ASoC: pcm3168a: ignore 0 Hz settings
ASoC: Intel: tgl_max98373: fix a runtime pm issue in multi-thread case
...
Merge tag 'iommu-fixes-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"Two fixes for the AMD IOMMU driver:
- Fix a potential NULL-ptr dereference found by smatch
- Fix interrupt remapping when a device is assigned to a guest and
AVIC is enabled"
* tag 'iommu-fixes-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Restore IRTE.RemapEn bit for amd_iommu_activate_guest_mode
iommu/amd: Fix potential @entry null deref
Merge tag 'mtd/fixes-for-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD/SPI NOR fixes from Vignesh Raghavendra:
"Revert patches that caused non volatile Quad Enable bit to be cleared
for certain SPI NOR flashes during module remove or during shutdown,
thus breaking backward compatibility"
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
* tag 'mtd/fixes-for-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
Revert "mtd: spi-nor: Add capability to disable flash quad mode"
Revert "mtd: spi-nor: Disable the flash quad mode in spi_nor_restore()"
objtool: Fix noreturn detection for ignored functions
When a function is annotated with STACK_FRAME_NON_STANDARD, objtool
doesn't validate its code paths. It also skips sibling call detection
within the function.
But sibling call detection is actually needed for the case where the
ignored function doesn't have any return instructions. Otherwise
objtool naively marks the function as implicit static noreturn, which
affects the reachability of its callers, resulting in "unreachable
instruction" warnings.
Fix it by just enabling sibling call detection for ignored functions.
The 'insn->ignore' check in add_jump_destinations() is no longer needed
after
e6da9567959e ("objtool: Don't use ignore flag for fake jumps").
* pm-cpuidle:
ACPI: processor: Take over RCU-idle for C3-BM idle
cpuidle: Allow cpuidle drivers to take over RCU-idle
ACPI: processor: Use CPUIDLE_FLAG_TLB_FLUSHED
ACPI: processor: Use CPUIDLE_FLAG_TIMER_STOP
kconfig: qconf: use delete[] instead of delete to free array (again)
Commit c9b09a9249e6 ("kconfig: qconf: use delete[] instead of delete
to free array") fixed two lines, but there is one more.
(cppcheck does not report it for some reason...)
This was detected by Clang.
"make HOSTCXX=clang++ xconfig" reports the following:
scripts/kconfig/qconf.cc:1279:2: warning: 'delete' applied to a pointer that was allocated with 'new[]'; did you mean 'delete[]'? [-Wmismatched-new-delete]
delete data;
^
[]
scripts/kconfig/qconf.cc:1239:15: note: allocated with 'new[]' here
char *data = new char[count + 1];
^
Fixes: c4f7398bee9c ("kconfig: qconf: make debug links work again") Fixes: c9b09a9249e6 ("kconfig: qconf: use delete[] instead of delete to free array") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
iommu/amd: Restore IRTE.RemapEn bit for amd_iommu_activate_guest_mode
Commit e52d58d54a32 ("iommu/amd: Use cmpxchg_double() when updating
128-bit IRTE") removed an assumption that modify_irte_ga always set
the valid bit, which requires the callers to set the appropriate value
for the struct irte_ga.valid bit before calling the function.
Similar to the commit 26e495f34107 ("iommu/amd: Restore IRTE.RemapEn
bit after programming IRTE"), which is for the function
amd_iommu_deactivate_guest_mode().
The same change is also needed for the amd_iommu_activate_guest_mode().
Otherwise, this could trigger IO_PAGE_FAULT for the VFIO based VMs with
AVIC enabled.
This warning happens when unwinding from an interrupt in
ret_from_fork(). If entry code gets interrupted, the state of the
frame pointer (rbp) may be undefined, which can confuse the unwinder,
resulting in warnings like the above.
There's an in_entry_code() check which normally silences such
warnings for entry code. But in this case, ret_from_fork() is getting
interrupted. It recently got moved out of .entry.text, so the
in_entry_code() check no longer works.
It could be moved back into .entry.text, but that would break the
noinstr validation because of the call to schedule_tail().
Instead, initialize each new task's RBP to point to the task's entry
regs via an encoded frame pointer. That will allow the unwinder to
reach the end of the stack gracefully.
Fixes: b9f6976bfb94 ("x86/entry/64: Move non entry code into .text section") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/f366bbf5a8d02e2318ee312f738112d0af74d16f.1600103007.git.jpoimboe@redhat.com
Merge branch 'for-5.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu fix from Dennis Zhou:
"This is a fix for the first chunk size calculation where the variable
length array incorrectly used the number of longs instead of bytes of
longs.
This came in as a code fix and not a bug report, so I don't think it
was widely problematic. I believe it worked out due to it being
memblock memory and alignment requirements working in our favor"
* 'for-5.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu: fix first chunk size calculation for populated bitmap
Merge tag 'drm-fixes-2020-09-18' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"A bunch of small fixes, some of the i915 ones have been out for a
while and got better commit msg explaining some better reasoning
behind them (hopefully this trend continues).
Otherwise there a few AMD related ones mostly small, one radeon PLL
regression fix and a bunch of small mediatek fixes.
amdgpu:
- Sienna Cichlid fixes
- Navy Flounder fixes
- DC fixes
amdkfd:
- Fix a GPU reset crash
- Fix a memory leak
radeon:
- Revert a PLL fix that broke other boards
i915:
- Avoid exposing a partially constructed context
- Use RCU instead of mutex for context termination list iteration
- Avoid data race reported by KCSAN
- Filter wake_flags passed to default_wake_function
mediatek:
- Fix scrolling of panel
- Remove duplicated include
- Use CPU when fail to get cmdq event
- Add missing put_device() call"
* tag 'drm-fixes-2020-09-18' of git://anongit.freedesktop.org/drm/drm: (21 commits)
drm/amd/display: Don't log hdcp module warnings in dmesg
drm/amdgpu: declare ta firmware for navy_flounder
drm/mediatek: Add missing put_device() call in mtk_hdmi_dt_parse_pdata()
drm/mediatek: Add missing put_device() call in mtk_drm_kms_init()
drm/mediatek: Add exception handing in mtk_drm_probe() if component init fail
drm/mediatek: Add missing put_device() call in mtk_ddp_comp_init()
drm/mediatek: Use CPU when fail to get cmdq event
drm/mediatek: Remove duplicated include
drm/i915: Filter wake_flags passed to default_wake_function
drm/i915: Be wary of data races when reading the active execlists
drm/i915/gem: Reduce context termination list iteration guard to RCU
drm/i915/gem: Delay tracking the GEM context until it is registered
drm/amdgpu/dc: Require primary plane to be enabled whenever the CRTC is
drm/radeon: revert "Prefer lower feedback dividers"
drm/amdgpu: Include sienna_cichlid in USBC PD FW support.
drm/amd/display: update nv1x stutter latencies
drm/amd/display: Don't use DRM_ERROR() for DTM add topology
drm/amd/pm: support runtime pptable update for sienna_cichlid etc.
drm/amdkfd: fix a memory leak issue
drm/kfd: fix a system crash issue during GPU recovery
...
Dave Airlie [Thu, 17 Sep 2020 22:37:31 +0000 (08:37 +1000)]
Merge tag 'drm-intel-fixes-2020-09-17' of ssh://git.freedesktop.org/git/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.9-rc6:
- Avoid exposing a partially constructed context
- Use RCU instead of mutex for context termination list iteration
- Avoid data race reported by KCSAN
- Filter wake_flags passed to default_wake_function
Hans de Goede [Wed, 9 Sep 2020 10:32:33 +0000 (12:32 +0200)]
i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()
Some ACPI i2c-devices _STA method (which is used to detect if the device
is present) use autodetection code which probes which device is present
over i2c. This requires the I2C ACPI OpRegion handler to be registered
before we enumerate i2c-clients under the i2c-adapter.
This fixes the i2c touchpad on the Lenovo ThinkBook 14-IIL and
ThinkBook 15 IIL not getting an i2c-client instantiated and thus not
working.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1842039 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Sunghyun Jin [Thu, 3 Sep 2020 12:41:16 +0000 (21:41 +0900)]
percpu: fix first chunk size calculation for populated bitmap
Variable populated, which is a member of struct pcpu_chunk, is used as a
unit of size of unsigned long.
However, size of populated is miscounted. So, I fix this minor part.
Fixes: 8ab16c43ea79 ("percpu: change the number of pages marked in the first_chunk pop bitmap") Cc: <stable@vger.kernel.org> # 4.14+ Signed-off-by: Sunghyun Jin <mcsmonk@gmail.com> Signed-off-by: Dennis Zhou <dennis@kernel.org>
mm: allow a controlled amount of unfairness in the page lock
Commit 2a9127fcf229 ("mm: rewrite wait_on_page_bit_common() logic") made
the page locking entirely fair, in that if a waiter came in while the
lock was held, the lock would be transferred to the lockers strictly in
order.
That was intended to finally get rid of the long-reported watchdog
failures that involved the page lock under extreme load, where a process
could end up waiting essentially forever, as other page lockers stole
the lock from under it.
It also improved some benchmarks, but it ended up causing huge
performance regressions on others, simply because fair lock behavior
doesn't end up giving out the lock as aggressively, causing better
worst-case latency, but potentially much worse average latencies and
throughput.
Instead of reverting that change entirely, this introduces a controlled
amount of unfairness, with a sysctl knob to tune it if somebody needs
to. But the default value should hopefully be good for any normal load,
allowing a few rounds of lock stealing, but enforcing the strict
ordering before the lock has been stolen too many times.
There is also a hint from Matthieu Baerts that the fair page coloring
may end up exposing an ABBA deadlock that is hidden by the usual
optimistic lock stealing, and while the unfairness doesn't fix the
fundamental issue (and I'm still looking at that), it avoids it in
practice.
The amount of unfairness can be modified by writing a new value to the
'sysctl_page_lock_unfairness' variable (default value of 5, exposed
through /proc/sys/vm/page_lock_unfairness), but that is hopefully
something we'd use mainly for debugging rather than being necessary for
any deep system tuning.
This whole issue has exposed just how critical the page lock can be, and
how contended it gets under certain locks. And the main contention
doesn't really seem to be anything related to IO (which was the origin
of this lock), but for things like just verifying that the page file
mapping is stable while faulting in the page into a page table.
Andrew Jones [Wed, 16 Sep 2020 15:45:30 +0000 (17:45 +0200)]
arm64: paravirt: Initialize steal time when cpu is online
Steal time initialization requires mapping a memory region which
invokes a memory allocation. Doing this at CPU starting time results
in the following trace when CONFIG_DEBUG_ATOMIC_SLEEP is enabled:
However we don't need to initialize steal time at CPU starting time.
We can simply wait until CPU online time, just sacrificing a bit of
accuracy by returning zero for steal time until we know better.
While at it, add __init to the functions that are only called by
pv_time_init() which is __init.
Signed-off-by: Andrew Jones <drjones@redhat.com> Fixes: e0685fa228fd ("arm64: Retrieve stolen time as paravirtualized guest") Cc: stable@vger.kernel.org Reviewed-by: Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/20200916154530.40809-1-drjones@redhat.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The reason is the offset[] creation and later usage, while building
the eBPF body. The code currently omits the first instruction, since
build_insn() will increase our ctx->idx before saving it.
That was fine up until bounded eBPF loops were introduced. After that
introduction, offset[0] must be the offset of the end of prologue which
is the start of the 1st insn while, offset[n] holds the
offset of the end of n-th insn.
When "taken loop with back jump to 1st insn" test runs, it will
eventually call bpf2a64_offset(-1, 2, ctx). Since negative indexing is
permitted, the current outcome depends on the value stored in
ctx->offset[-1], which has nothing to do with our array.
If the value happens to be 0 the tests will work. If not this error
triggers.
commit 7c2e988f400e ("bpf: fix x64 JIT code generation for jmp to 1st insn")
fixed an indentical bug on x86 when eBPF bounded loops were introduced.
So let's fix it by creating the ctx->offset[] differently. Track the
beginning of instruction and account for the extra instruction while
calculating the arm instruction offsets.
The CRC calculation done by genksyms is triggered when the parser hits
EXPORT_SYMBOL*() macros. At this point, genksyms recursively expands the
types of the function parameters, and uses that as the input for the CRC
calculation. In the case of forward-declared structs, the type expands
to 'UNKNOWN'. Following this, it appears that the result of the
expansion of each type is cached somewhere, and seems to be re-used
when/if the same type is seen again for another exported symbol in the
same C file.
Unfortunately, this can cause CRC 'stability' issues when a struct
definition becomes visible in the middle of a C file. For example, let's
assume code with the following pattern:
struct foo;
int bar(struct foo *arg)
{
/* Do work ... */
}
EXPORT_SYMBOL_GPL(bar);
/* This contains struct foo's definition */
#include "foo.h"
int baz(struct foo *arg)
{
/* Do more work ... */
}
EXPORT_SYMBOL_GPL(baz);
Here, baz's CRC will be computed using the expansion of struct foo that
was cached after bar's CRC calculation ('UNKOWN' here). But if
EXPORT_SYMBOL_GPL(bar) is removed from the file (because of e.g. symbol
trimming using CONFIG_TRIM_UNUSED_KSYMS), struct foo will be expanded
late, during baz's CRC calculation, which now has visibility over the
full struct definition, hence resulting in a different CRC for baz.
The proper fix for this certainly is in genksyms, but that will take me
some time to get right. In the meantime, we have seen one occurrence of
this in the ehci-hcd code which hits this problem because of the way it
includes C files halfway through the code together with an unlucky mix
of symbol trimming.
In order to workaround this, move the include done in ehci-hub.c early
in ehci-hcd.c, hence making sure the struct definitions are visible to
the entire file. This improves CRC stability of the ehci-hcd exports
even when symbol trimming is enabled.
drm/amd/display: Don't log hdcp module warnings in dmesg
[Why]
DTM topology updates happens by default now. This results in DTM
warnings when hdcp is not even being enabled. This spams the dmesg
and doesn't effect normal display functionality so it is better to log it
using DRM_DEBUG_KMS()
[How]
Change the DRM_WARN() to DRM_DEBUG_KMS()
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The firmware provided via MODULE_FIRMWARE appears in the
module information. External tools(eg. dracut) may use the
list of fw files to include them as appropriate in an initramfs,
thus missing declaration will lead to request firmware failure
in boot time.
drm/mediatek: Add missing put_device() call in mtk_hdmi_dt_parse_pdata()
if of_find_device_by_node() succeed, mtk_drm_kms_init() doesn't have
a corresponding put_device(). Thus add jump target to fix the exception
handling for this function implementation.
drm/mediatek: Add missing put_device() call in mtk_drm_kms_init()
if of_find_device_by_node() succeed, mtk_drm_kms_init() doesn't have
a corresponding put_device(). Thus add jump target to fix the exception
handling for this function implementation.
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
drm/mediatek: Add missing put_device() call in mtk_ddp_comp_init()
if of_find_device_by_node() succeed, mtk_ddp_comp_init() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes: d0afe37f5209 ("drm/mediatek: support CMDQ interface in ddp component") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Wang Hai [Wed, 19 Aug 2020 02:58:29 +0000 (10:58 +0800)]
drm/mediatek: Remove duplicated include
Remove mtk_drm_ddp.h which is included more than once
Fixes: 9aef5867c86c ("drm/mediatek: drop use of drmP.h") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
On A20R machines the interrupt pending bits in cause register need to be
updated by requesting the chipset to do it. This needs to be done to
find the interrupt cause and after interrupt service. In
commit 0b888c7f3a03 ("MIPS: SNI: Convert to new irq_chip functions") the
function to do after service update got lost, which caused spurious
interrupts.
Fixes: 0b888c7f3a03 ("MIPS: SNI: Convert to new irq_chip functions") Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Merge tag 'perf-tools-fixes-for-v5.9-2020-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Set PERF_SAMPLE_PERIOD if attr->freq is set.
- Remove trailing commas from AMD JSON vendor event files.
- Don't clear event's period if set by a event definition term.
- Leader sampling shouldn't clear sample period in 'perf test'.
- Fix the "signal" test inline assembly when built with DEBUG=1.
- Fix memory leaks detected by ASAN, some in normal paths, some in
error paths.
- Fix 2 memory sanitizer warnings in 'perf bench'.
- Fix the ratio comments of miss-events in 'perf stat'.
- Prevent override of attr->sample_period for libpfm4 events.
- Sync kvm.h and in.h headers with the kernel sources.
* tag 'perf-tools-fixes-for-v5.9-2020-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf stat: Fix the ratio comments of miss-events
perf test: Free formats for perf pmu parse test
perf metric: Do not free metric when failed to resolve
perf metric: Free metric when it failed to resolve
perf metric: Release expr_parse_ctx after testing
perf test: Fix memory leaks in parse-metric test
perf parse-event: Fix memory leak in evsel->unit
perf evlist: Fix cpu/thread map leak
perf metric: Fix some memory leaks - part 2
perf metric: Fix some memory leaks
perf test: Free aliases for PMU event map aliases test
perf vendor events amd: Remove trailing commas
perf test: Leader sampling shouldn't clear sample period
perf record: Don't clear event's period if set by a term
tools headers UAPI: update linux/in.h copy
tools headers UAPI: Sync kvm.h headers with the kernel sources
perf record: Prevent override of attr->sample_period for libpfm4 events
perf record: Set PERF_RECORD_PERIOD if attr->freq is set.
perf bench: Fix 2 memory sanitizer warnings
perf test: Fix the "signal" test inline assembly
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
"A handful of clk driver fixes. Mostly they're for error paths or
improper memory allocations sizes. Nothing as exciting as a wildfire"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: lpass: Correct goto target in lpass_core_sc7180_probe()
clk: versatile: Add of_node_put() before return statement
clk: bcm: dvp: Select the reset framework
clk: rockchip: Fix initialization of mux_pll_src_4plls_p
clk: davinci: Use the correct size when allocating memory
Leon Romanovsky [Tue, 15 Sep 2020 08:27:41 +0000 (11:27 +0300)]
MAINTAINERS: Fix Max's and Shravan's emails
Max's and Shravan's usernames were changed while @mellanox.com emails
were transferred to be @nvidia.com.
Fixes: f6da70d99c96 ("MAINTAINERS: Update Mellanox and Cumulus Network addresses to new domain") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Zijlstra [Tue, 15 Sep 2020 10:32:01 +0000 (12:32 +0200)]
ACPI: processor: Take over RCU-idle for C3-BM idle
The C3 BusMaster idle code takes lock in a number of places, some deep
inside the ACPI code. Instead of wrapping it all in RCU_NONIDLE, have
the driver take over RCU-idle duty and avoid flipping RCU state back
and forth a lot.
( by marking 'C3 && bm_check' as RCU_IDLE, we _must_ call enter_bm() for
that combination, otherwise we'll loose RCU-idle, this requires
shuffling some code around )
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Peter Zijlstra [Tue, 15 Sep 2020 10:32:00 +0000 (12:32 +0200)]
cpuidle: Allow cpuidle drivers to take over RCU-idle
Some drivers have to do significant work, some of which relies on RCU
still being active. Instead of using RCU_NONIDLE in the drivers and
flipping RCU back on, allow drivers to take over RCU-idle duty.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Peter Zijlstra [Tue, 15 Sep 2020 10:31:59 +0000 (12:31 +0200)]
ACPI: processor: Use CPUIDLE_FLAG_TLB_FLUSHED
Make acpi_processor_idle() use the generic TLB flushing code.
This again removes RCU usage after rcu_idle_enter().
(XXX make every C3 invalidate TLBs, not just C3-BM)
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hou Tao [Tue, 15 Sep 2020 14:07:50 +0000 (22:07 +0800)]
locking/percpu-rwsem: Use this_cpu_{inc,dec}() for read_count
The __this_cpu*() accessors are (in general) IRQ-unsafe which, given
that percpu-rwsem is a blocking primitive, should be just fine.
However, file_end_write() is used from IRQ context and will cause
load-store issues on architectures where the per-cpu accessors are not
natively irq-safe.
Fix it by using the IRQ-safe this_cpu_*() for operations on
read_count. This will generate more expensive code on a number of
platforms, which might cause a performance regression for some of the
other percpu-rwsem users.
If any such is reported, we can consider alternative solutions.
Fixes: 70fe2f48152e ("aio: fix freeze protection of aio writes") Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Link: https://lkml.kernel.org/r/20200915140750.137881-1-houtao1@huawei.com
Qi Liu [Wed, 16 Sep 2020 10:48:51 +0000 (18:48 +0800)]
perf stat: Fix the ratio comments of miss-events
'perf stat' displays miss ratio of L1-dcache, L1-icache, dTLB cache,
iTLB cache and LL-cache. Take L1-dcache for example, miss ratio is
caculated as "L1-dcache-load-misses/L1-dcache-loads". So "of all
L1-dcache hits" is unsuitable to describe it, and "of all L1-dcache
accesses" seems better.
The comments of L1-icache, dTLB cache, iTLB cache and LL-cache are
fixed in the same way.
fbcon: Fix user font detection test at fbcon_resize().
syzbot is reporting OOB read at fbcon_resize() [1], for
commit 39b3cffb8cf31117 ("fbcon: prevent user font height or width change
from causing potential out-of-bounds access") is by error using
registered_fb[con2fb_map[vc->vc_num]]->fbcon_par->p->userfont (which was
set to non-zero) instead of fb_display[vc->vc_num].userfont (which remains
zero for that display).
We could remove tricky userfont flag [2], for we can determine it by
comparing address of the font data and addresses of built-in font data.
But since that commit is failing to fix the original OOB read [3], this
patch keeps the change minimal in case we decide to revert altogether.
Ricardo Neri [Fri, 21 Aug 2020 18:48:10 +0000 (11:48 -0700)]
powercap: RAPL: Add support for Lakefield
Simply add Lakefield model ID. No additional changes are needed.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
[ rjw: Minor subject edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
These serial ports are exposed by the OOB-management-engine on
RealManage-enabled network cards (e.g. AMD DASH enabled systems using
Realtek cards).
Because these have 3 BARs, they fail the "num_iomem <= 1" check in
serial_pci_guess_board.
I've manually checked the two IOMEM regions and BAR 2 doesn't seem to
respond to reads, but BAR 4 seems to be an MMIO version of the IO ports
(untested).
With this change, the ports are detected:
0000:02:00.1: ttyS0 at I/O 0x2200 (irq = 82, base_baud = 115200) is a 16550A
0000:02:00.2: ttyS1 at I/O 0x2100 (irq = 55, base_baud = 115200) is a 16550A
Johan Hovold [Wed, 9 Sep 2020 14:31:01 +0000 (16:31 +0200)]
serial: core: fix console port-lock regression
Fix the port-lock initialisation regression introduced by commit a3cb39d258ef ("serial: core: Allow detach and attach serial device for
console") by making sure that the lock is again initialised during
console setup.
The console may be registered before the serial controller has been
probed in which case the port lock needs to be initialised during
console setup by a call to uart_set_options(). The console-detach
changes introduced a regression in several drivers by effectively
removing that initialisation by not initialising the lock when the port
is used as a console (which is always the case during console setup).
Add back the early lock initialisation and instead use a new
console-reinit flag to handle the case where a console is being
re-attached through sysfs.
The question whether the console-detach interface should have been added
in the first place is left for another discussion.
Note that the console-enabled check in uart_set_options() is not
redundant because of kgdboc, which can end up reinitialising an already
enabled console (see commit 42b6a1baa3ec ("serial_core: Don't
re-initialize a previously initialized spinlock.")).
Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") Cc: stable <stable@vger.kernel.org> # 5.7 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200909143101.15389-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Wed, 9 Sep 2020 14:31:00 +0000 (16:31 +0200)]
serial: core: fix port-lock initialisation
Commit f743061a85f5 ("serial: core: Initialise spin lock before use in
uart_configure_port()") tried to work around a breakage introduced by
commit a3cb39d258ef ("serial: core: Allow detach and attach serial
device for console") by adding a second initialisation of the port lock
when registering the port.
As reported by the build robots [1], this doesn't really solve the
regression introduced by the console-detach changes and also adds a
second redundant initialisation of the lock for normal ports.
Start cleaning up this mess by removing the redundant initialisation and
making sure that the port lock is again initialised once-only for ports
that aren't already in use as a console.
USB: quirks: Add USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for BYD zhaoxin notebook
Add a USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for the BYD zhaoxin notebook.
This notebook come with usb touchpad. And we would like to disable
touchpad wakeup on this notebook by default.
Oliver Neukum [Wed, 16 Sep 2020 09:40:25 +0000 (11:40 +0200)]
USB: UAS: fix disconnect by unplugging a hub
The SCSI layer can go into an ugly loop if you ignore that a device is
gone. You need to report an error in the command rather than in the
return value of the queue method.
We need to specifically check for ENODEV. The issue goes back to the
introduction of the driver.
Heikki Krogerus [Wed, 16 Sep 2020 09:00:34 +0000 (12:00 +0300)]
usb: typec: ucsi: Prevent mode overrun
Sometimes the embedded controller firmware does not
terminate the list of alternate modes that the partner
supports in its response to the GET_ALTERNATE_MODES command.
Instead the firmware returns the supported alternate modes
over and over again until the driver stops requesting them.
If that happens, the number of modes for each alternate mode
will exceed the maximum 6 that is defined in the USB Power
Delivery specification. Making sure that can't happen by
adding a check for it.
This fixes NULL pointer dereference that is caused by the
overrun.
Fixes: ad74b8649beaf ("usb: typec: ucsi: Preliminary support for alternate modes") Cc: stable@vger.kernel.org Reported-by: Zwane Mwaikambo <zwanem@gmail.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200916090034.25119-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heikki Krogerus [Wed, 16 Sep 2020 09:00:33 +0000 (12:00 +0300)]
usb: typec: ucsi: acpi: Increase command completion timeout value
UCSI specification quite clearly states that if a command
can't be completed in 10ms, the firmware must notify
about BUSY condition. Unfortunately almost none of the
platforms (the firmware on them) generate the BUSY
notification even if a command can't be completed in time.
The driver already considered that, and used a timeout
value of 5 seconds, but processing especially the alternate
mode discovery commands takes often considerable amount of
time from the firmware, much more than the 5 seconds. That
happens especially after bootup when devices are already
connected to the USB Type-C connector. For now on those
platforms the alternate mode discovery has simply failed
because of the timeout.
To improve the situation, increasing the timeout value for
the command completion to 1 minute. That should give enough
time for even the slowest firmware to process the commands.
Chris Wilson [Tue, 28 Jul 2020 15:21:44 +0000 (16:21 +0100)]
drm/i915: Filter wake_flags passed to default_wake_function
(NOTE: This is the minimal backportable fix, a full fix is being
developed at https://patchwork.freedesktop.org/patch/388048/)
The flags passed to the wait_entry.func are passed onwards to
try_to_wake_up(), which has a very particular interpretation for its
wake_flags. In particular, beyond the published WF_SYNC, it has a few
internal flags as well. Since we passed the fence->error down the chain
via the flags argument, these ended up in the default_wake_function
confusing the kernel/sched.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2110 Fixes: ef4688497512 ("drm/i915: Propagate fence errors") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: <stable@vger.kernel.org> # v5.4+ Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200728152144.1100-1-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch]
[Joonas: Added a note and link about more complete fix] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit f4b3c395540aa3d4f5a6275c5bdd83ab89034806) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Thu, 16 Jul 2020 14:22:06 +0000 (15:22 +0100)]
drm/i915: Be wary of data races when reading the active execlists
To implement preempt-to-busy (and so efficient timeslicing and best utilization
of the hardware submission ports) we let the GPU run asynchronously in respect
to the ELSP submission queue. This created challenges in keeping and accessing
the driver state mirroring the asynchronous GPU execution.
The latest occurence of this was spotted by KCSAN:
[ 1413.563200] BUG: KCSAN: data-race in __await_execution+0x217/0x370 [i915]
[ 1413.563221]
[ 1413.563236] race at unknown origin, with read to 0xffff88885bb6c478 of 8 bytes by task 9654 on cpu 1:
[ 1413.563548] __await_execution+0x217/0x370 [i915]
[ 1413.563891] i915_request_await_dma_fence+0x4eb/0x6a0 [i915]
[ 1413.564235] i915_request_await_object+0x421/0x490 [i915]
[ 1413.564577] i915_gem_do_execbuffer+0x29b7/0x3c40 [i915]
[ 1413.564967] i915_gem_execbuffer2_ioctl+0x22f/0x5c0 [i915]
[ 1413.564998] drm_ioctl_kernel+0x156/0x1b0
[ 1413.565022] drm_ioctl+0x2ff/0x480
[ 1413.565046] __x64_sys_ioctl+0x87/0xd0
[ 1413.565069] do_syscall_64+0x4d/0x80
[ 1413.565094] entry_SYSCALL_64_after_hwframe+0x44/0xa9
To complicate matters, we have to both avoid the read tearing of *active and
avoid any write tearing as perform the pending[] -> inflight[] promotion of the
execlists.
This is because we cannot rely on the memcpy doing u64 aligned copies on all
kernels/platforms and so we opt to open-code it with explicit WRITE_ONCE
annotations to satisfy KCSAN.
v2: When in doubt, write the same comment again.
v3: Expanded commit message.
Fixes: b55230e5e800 ("drm/i915: Check for awaits on still currently executing requests") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200716142207.13003-1-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch]
[Joonas: Added expanded commit message from Tvrtko and Chris] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit b4d9145b0154f8c71dafc2db5fd445f1f3db9426) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Thu, 6 Aug 2020 10:59:54 +0000 (11:59 +0100)]
drm/i915/gem: Reduce context termination list iteration guard to RCU
As we now protect the timeline list using RCU, we can drop the
timeline->mutex for guarding the list iteration during context close, as
we are searching for an inflight request. Any new request will see the
context is banned and not be submitted. In doing so, pull the checks for
a concurrent submission of the request (notably the
i915_request_completed()) under the engine spinlock, to fully serialise
with __i915_request_submit()). That is in the case of preempt-to-busy
where the request may be completed during the __i915_request_submit(),
we need to be careful that we sample the request status after
serialising so that we don't miss the request the engine is actually
submitting.
Fixes: 4a3174152147 ("drm/i915/gem: Refine occupancy test in kill_context()")
References: d22d2d073ef8 ("drm/i915: Protect i915_request_await_start from early waits") # rcu protection of timeline->requests
References: https://gitlab.freedesktop.org/drm/intel/-/issues/1622
References: https://gitlab.freedesktop.org/drm/intel/-/issues/2158 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200806105954.7766-1-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 736e785f9b28cd9ef2d16a80960a04fd00e64b22) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Thu, 30 Jul 2020 09:28:56 +0000 (10:28 +0100)]
drm/i915/gem: Delay tracking the GEM context until it is registered
Avoid exposing a partially constructed context by deferring the
list_add() from the initial construction to the end of registration.
Otherwise, if we peek into the list of contexts from inside debugfs, we
may see the partially constructed context and chase down some dangling
incomplete pointers.
Reported-by: CQ Tang <cq.tang@intel.com> Fixes: 3aa9945a528e ("drm/i915: Separate GEM context construction and registration to userspace")
References: f6e8aa387171 ("drm/i915: Report the number of closed vma held by each context in debugfs") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: CQ Tang <cq.tang@intel.com> Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200730092856.23615-1-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit eb4dedae920a07c485328af3da2202ec5184fb17) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
projects / linux-stable / log