The clang build reports this error
fs/udf/inode.c:805:6: error: variable 'newblock' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (*err < 0)
^~~~~~~~
newblock is never set before error handling jump.
Initialize newblock to 0 and remove redundant settings.
Fixes: d8b39db5fab8 ("udf: Handle error when adding extent to a file") Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20221230175341.1629734-1-trix@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit c28cd1f3433c ("clk: Mark a fwnode as initialized when using
CLK_OF_DECLARE() macro"), drivers/clk/mvebu/kirkwood.c fails to build:
drivers/clk/mvebu/kirkwood.c:358:1: error: expected identifier or '('
CLK_OF_DECLARE(98dx1135_clk, "marvell,mv98dx1135-core-clock",
^
include/linux/clk-provider.h:1367:21: note: expanded from macro 'CLK_OF_DECLARE'
static void __init name##_of_clk_init_declare(struct device_node *np) \
^
<scratch space>:124:1: note: expanded from here
98dx1135_clk_of_clk_init_declare
^
drivers/clk/mvebu/kirkwood.c:358:1: error: invalid digit 'd' in decimal constant
include/linux/clk-provider.h:1372:34: note: expanded from macro 'CLK_OF_DECLARE'
OF_DECLARE_1(clk, name, compat, name##_of_clk_init_declare)
^
<scratch space>:125:3: note: expanded from here
98dx1135_clk_of_clk_init_declare
^
drivers/clk/mvebu/kirkwood.c:358:1: error: invalid digit 'd' in decimal constant
include/linux/clk-provider.h:1372:34: note: expanded from macro 'CLK_OF_DECLARE'
OF_DECLARE_1(clk, name, compat, name##_of_clk_init_declare)
^
<scratch space>:125:3: note: expanded from here
98dx1135_clk_of_clk_init_declare
^
drivers/clk/mvebu/kirkwood.c:358:1: error: invalid digit 'd' in decimal constant
include/linux/clk-provider.h:1372:34: note: expanded from macro 'CLK_OF_DECLARE'
OF_DECLARE_1(clk, name, compat, name##_of_clk_init_declare)
^
<scratch space>:125:3: note: expanded from here
98dx1135_clk_of_clk_init_declare
^
C function names must start with either an alphabetic letter or an
underscore. To avoid generating invalid function names from clock names,
add two underscores to the beginning of the identifier.
Fixes: c28cd1f3433c ("clk: Mark a fwnode as initialized when using CLK_OF_DECLARE() macro") Suggested-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20230308-clk_of_declare-fix-v1-1-317b741e2532@kernel.org Reviewed-by: Saravana Kannan <saravanak@google.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When loading a DT overlay that creates a device, the device is not
probed, unless the DT overlay is unloaded and reloaded again.
After the recent refactoring to improve fw_devlink, it no longer depends
on the "compatible" property to identify which device tree nodes will
become struct devices. fw_devlink now picks up dangling consumers
(consumers pointing to descendent device tree nodes of a device that
aren't converted to child devices) when a device is successfully bound
to a driver. See __fw_devlink_pickup_dangling_consumers().
However, during DT overlay, a device's device tree node can have
sub-nodes added/removed without unbinding/rebinding the driver. This
difference in behavior between the normal device instantiation and
probing flow vs. the DT overlay flow has a bunch of implications that
are pointed out elsewhere[1]. One of them is that the fw_devlink logic
to pick up dangling consumers is never exercised.
This patch solves the fw_devlink issue by marking all DT nodes added by
DT overlays with FWNODE_FLAG_NOT_DEVICE (fwnode that won't become
device), and by clearing the flag when a struct device is actually
created for the DT node. This way, fw_devlink knows not to have
consumers waiting on these newly added DT nodes, and to propagate the
dependency to an ancestor DT node that has the corresponding struct
device.
Based on a patch by Saravana Kannan, which covered only platform and spi
devices.
We already mark fwnodes as initialized when they are registered as clock
providers. We do this so that fw_devlink can tell when a clock driver
doesn't use the driver core framework to probe/initialize its device.
This ensures fw_devlink doesn't block the consumers of such a clock
provider indefinitely.
However, some users of CLK_OF_DECLARE() macros don't use the same node
that matches the macro as the node for the clock provider, but they
initialize the entire node. To cover these cases, also mark the nodes
that match the macros as initialized when the init callback function is
called.
An example of this is "stericsson,u8500-clks" that's handled using
CLK_OF_DECLARE() and looks something like this:
This patch makes sure that "clocks" is marked as initialized so that
fw_devlink knows that all nodes under it have been initialized. If the
driver creates struct devices for some of the subnodes, fw_devlink is
smart enough to know to wait for those devices to probe, so no special
handling is required for those cases.
Commit 3e453522593d ("md: Free resources in __md_stop") tried to fix
null-ptr-deference for 'active_io' by moving percpu_ref_exit() to
__md_stop(), however, the commit also moving 'writes_pending' to
__md_stop(), and this will cause mdadm tests broken:
// start raid again
array_state_store
do_md_run
raid1_run
mddev_init_writes_pending
if (mddev->writes_pending.percpu_count_ptr)
// won't reinit
// inactive raid again
...
percpu_ref_exit
-> null-ptr-deference
Before the commit, 'writes_pending' is exited when mddev is freed, and
it's safe to restart raid because mddev_init_writes_pending() already make
sure that 'writes_pending' will only be initialized once.
Fix the prblem by moving 'writes_pending' back, it's a litter hard to find
the relationship between alloc memory and free memory, however, code
changes is much less and we lived with this for a long time already.
Fixes: 3e453522593d ("md: Free resources in __md_stop") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230328094400.1448955-1-yukuai1@huaweicloud.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I found that the read code might send multiple requests using the same
nfs_pgio_header, but nfs4_proc_read_setup() is only called once. This is
how we ended up occasionally double-freeing the scratch buffer, but also
means we set a NULL pointer but non-zero length to the xdr scratch
buffer. This results in an oops the first time decoding needs to copy
something to scratch, which frequently happens when decoding READ_PLUS
hole segments.
I fix this by moving scratch handling into the pageio read code. I
provide a function to allocate scratch space for decoding read replies,
and free the scratch buffer when the nfs_pgio_header is freed.
Fixes: fbd2a05f29a9 (NFSv4.2: Rework scratch handling for READ_PLUS) Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If md_run() fails after ->active_io is initialized, then percpu_ref_exit
is called in error path. However, later md_free_disk will call
percpu_ref_exit again which leads to a panic because of null pointer
dereference. It can also trigger this bug when resources are initialized
but are freed in error path, then will be freed again in md_free_disk.
For creating raid device, md raid calls do_md_run->md_run, dm raid calls
md_run. We alloc those memory in md_run. For stopping raid device, md raid
calls do_md_stop->__md_stop, dm raid calls md_stop->__md_stop. So we can
free those memory resources in __md_stop.
Fixes: 72adae23a72c ("md: Change active_io to percpu") Reported-and-tested-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Samsung Odyssey Neo G9, running at 5120x1440@240/VRR, connected to Navi
21 via DisplayPort, blanks and the GPU hangs while starting the Steam
game Assetto Corsa Competizione (via Proton 7.0).
The pipe cpumask used to serialize opens between the main and percpu
trace pipes is not zeroed or initialized. This can result in
spurious -EBUSY returns if underlying memory is not fully zeroed.
This has been observed by immediate failure to read the main
trace_pipe file on an otherwise newly booted and idle system:
# cat /sys/kernel/debug/tracing/trace_pipe
cat: /sys/kernel/debug/tracing/trace_pipe: Device or resource busy
Zero the allocation of pipe_cpumask to avoid the problem.
Link: https://lore.kernel.org/linux-trace-kernel/20230831125500.986862-1-bfoster@redhat.com Cc: stable@vger.kernel.org Fixes: c2489bb7e6be ("tracing: Introduce pipe_cpumask to avoid race on trace_pipes") Reviewed-by: Zheng Yejian <zhengyejian1@huawei.com> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines")
and commit 21144bab4f11 ("sc16is7xx: Handle modem status lines")
changed the function of the GPIOs pins to act as modem control
lines without any possibility of selecting GPIO function.
As a consequence, applications that depends on GPIO lines configured
by default as GPIO pins no longer work as expected.
Also, the change to select modem control lines function was done only
for channel A of dual UART variants (752/762). This was not documented
in the log message.
Allow to specify GPIO or modem control line function in the device
tree, and for each of the ports (A or B).
Do so by using the new device-tree property named
"nxp,modem-control-line-ports" (property added in separate patch).
When registering GPIO chip controller, mask-out GPIO pins declared as
modem control lines according to this new DT property.
Fixes: 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines") Fixes: 21144bab4f11 ("sc16is7xx: Handle modem status lines") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com> Tested-by: Lech Perczak <lech.perczak@camlingroup.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230807214556.540627-5-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit c8f71b49ee4d ("serial: sc16is7xx: setup GPIO controller later
in probe") moved GPIO setup code later in probe function. Doing so
also required to move ports cleanup code (out_ports label) after the
GPIO cleanup code.
After these moves, the out_thread label becomes misplaced and makes
part of the cleanup code illogical.
This patch remove the now obsolete out_thread label and make GPIO
setup code jump to out_ports label if it fails.
Starting from SPR, the basic uncore PMON information is retrieved from
the discovery table (resides in an MMIO space populated by BIOS). It is
called the discovery method. The existing value of the type->num_boxes
is from the discovery table.
On some SPR variants, there is a firmware bug that makes the value from the
discovery table incorrect. We use the value from the
SPR_MSR_UNC_CBO_CONFIG MSR to replace the one from the discovery table:
38776cc45eb7 ("perf/x86/uncore: Correct the number of CHAs on SPR")
Unfortunately, the SPR_MSR_UNC_CBO_CONFIG isn't available for the EMR
XCC (Always returns 0), but the above firmware bug doesn't impact the
EMR XCC.
Don't let the value from the MSR replace the existing value from the
discovery table.
Fixes: 38776cc45eb7 ("perf/x86/uncore: Correct the number of CHAs on SPR") Reported-by: Stephane Eranian <eranian@google.com> Reported-by: Yunying Sun <yunying.sun@intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Yunying Sun <yunying.sun@intel.com> Link: https://lore.kernel.org/r/20230905134248.496114-1-kan.liang@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8795359e35bc ("x86/sgx: Silence softlockup detection when releasing large enclaves")
The test system has 64GB of enclave memory, and all is assigned to a single VM.
Release of 'vepc' takes a longer time and causes long latencies, which triggers
the softlockup warning.
Add cond_resched() to give other tasks a chance to run and reduce
latencies, which also avoids the softlockup detector.
[ mingo: Rewrote the changelog. ]
Fixes: 540745ddbc70 ("x86/sgx: Introduce virtual EPC for use by KVM guests") Reported-by: Yu Zhang <yu.zhang@ionos.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Yu Zhang <yu.zhang@ionos.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Kai Huang <kai.huang@intel.com> Acked-by: Haitao Huang <haitao.huang@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 85d07c556216 ("USB: core: Unite old scheme and new scheme
descriptor reads") altered the way USB devices are enumerated
following detection, and in the process it messed up the
initialization of SuperSpeed (or faster) devices:
[ 31.650759] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
[ 31.663107] usb 2-1: device descriptor read/8, error -71
[ 31.952697] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 3 using xhci_hcd
[ 31.965122] usb 2-1: device descriptor read/8, error -71
[ 32.080991] usb usb2-port1: attempt power cycle
...
The problem was caused by the commit forgetting that in SuperSpeed or
faster devices, the device descriptor uses a logarithmic encoding of
the bMaxPacketSize0 value. (For some reason I thought the 255 case in
the switch statement was meant for these devices, but it isn't -- it
was meant for Wireless USB and is no longer needed.)
We can fix the oversight by testing for buf->bMaxPacketSize0 = 9
(meaning 512, the actual maxpacket size for ep0 on all SuperSpeed
devices) and straightening out the logic that checks and adjusts our
initial guesses of the maxpacket value.
Reported-and-tested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Closes: https://lore.kernel.org/linux-usb/20230810002257.nadxmfmrobkaxgnz@synopsys.com/ Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: 85d07c556216 ("USB: core: Unite old scheme and new scheme descriptor reads") Link: https://lore.kernel.org/r/8809e6c5-59d5-4d2d-ac8f-6d106658ad73@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As analyzed by Khazhy Kumykov, the cause of this bug is a race between
read_descriptors() and hub_port_init(): The first routine uses a field
in udev->descriptor, not expecting it to change, while the second
overwrites it.
Prior to commit 45bf39f8df7f ("USB: core: Don't hold device lock while
reading the "descriptors" sysfs file") this race couldn't occur,
because the routines were mutually exclusive thanks to the device
locking. Removing that locking from read_descriptors() exposed it to
the race.
The best way to fix the bug is to keep hub_port_init() from changing
udev->descriptor once udev has been initialized and registered.
Drivers expect the descriptors stored in the kernel to be immutable;
we should not undermine this expectation. In fact, this change should
have been made long ago.
So now hub_port_init() will take an additional argument, specifying a
buffer in which to store the device descriptor it reads. (If udev has
not yet been initialized, the buffer pointer will be NULL and then
hub_port_init() will store the device descriptor in udev as before.)
This eliminates the data race responsible for the out-of-bounds read.
The changes to hub_port_init() appear more extensive than they really
are, because of indentation changes resulting from an attempt to avoid
writing to other parts of the usb_device structure after it has been
initialized. Similar changes should be made to the code that reads
the BOS descriptor, but that can be handled in a separate patch later
on. This patch is sufficient to fix the bug found by syzbot.
Reported-and-tested-by: syzbot+18996170f8096c6174d0@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/000000000000c0ffe505fe86c9ca@google.com/#r Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Khazhy Kumykov <khazhy@google.com> Fixes: 45bf39f8df7f ("USB: core: Don't hold device lock while reading the "descriptors" sysfs file") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/b958b47a-9a46-4c22-a9f9-e42e42c31251@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb_get_device_descriptor() routine reads the device descriptor
from the udev device and stores it directly in udev->descriptor. This
interface is error prone, because the USB subsystem expects in-memory
copies of a device's descriptors to be immutable once the device has
been initialized.
The interface is changed so that the device descriptor is left in a
kmalloc-ed buffer, not copied into the usb_device structure. A
pointer to the buffer is returned to the caller, who is then
responsible for kfree-ing it. The corresponding changes needed in the
various callers are fairly small.
In preparation for reworking the usb_get_device_descriptor() routine,
it is desirable to unite the two different code paths responsible for
initially determining endpoint 0's maximum packet size in a newly
discovered USB device. Making this determination presents a
chicken-and-egg sort of problem, in that the only way to learn the
maxpacket value is to get it from the device descriptor retrieved from
the device, but communicating with the device to retrieve a descriptor
requires us to know beforehand the ep0 maxpacket size.
In practice this problem is solved in two different ways, referred to
in hub.c as the "old scheme" and the "new scheme". The old scheme
(which is the approach recommended by the USB-2 spec) involves asking
the device to send just the first eight bytes of its device
descriptor. Such a transfer uses packets containing no more than
eight bytes each, and every USB device must have an ep0 maxpacket size
>= 8, so this should succeed. Since the bMaxPacketSize0 field of the
device descriptor lies within the first eight bytes, this is all we
need.
The new scheme is an imitation of the technique used in an early
Windows USB implementation, giving it the happy advantage of working
with a wide variety of devices (some of them at the time would not
work with the old scheme, although that's probably less true now). It
involves making an initial guess of the ep0 maxpacket size, asking the
device to send up to 64 bytes worth of its device descriptor (which is
only 18 bytes long), and then resetting the device to clear any error
condition that might have resulted from the guess being wrong. The
initial guess is determined by the connection speed; it should be
correct in all cases other than full speed, for which the allowed
values are 8, 16, 32, and 64 (in this case the initial guess is 64).
The reason for this patch is that the old- and new-scheme parts of
hub_port_init() use different code paths, one involving
usb_get_device_descriptor() and one not, for their initial reads of
the device descriptor. Since these reads have essentially the same
purpose and are made under essentially the same circumstances, this is
illogical. It makes more sense to have both of them use a common
subroutine.
This subroutine does basically what the new scheme's code did, because
that approach is more general than the one used by the old scheme. It
only needs to know how many bytes to transfer and whether or not it is
being called for the first iteration of a retry loop (in case of
certain time-out errors). There are two main differences from the
former code:
We initialize the bDescriptorType field of the transfer buffer
to 0 before performing the transfer, to avoid possibly
accessing an uninitialized value afterward.
We read the device descriptor into a temporary buffer rather
than storing it directly into udev->descriptor, which the old
scheme implementation used to do.
Since the whole point of this first read of the device descriptor is
to determine the bMaxPacketSize0 value, that is what the new routine
returns (or an error code). The value is stored in a local variable
rather than in udev->descriptor. As a side effect, this necessitates
moving a section of code that checks the bcdUSB field for SuperSpeed
devices until after the full device descriptor has been retrieved.
Some usb hubs will negotiate DisplayPort Alt mode with the device
but will then negotiate a data role swap after entering the alt
mode. The data role swap causes the device to unregister all alt
modes, however the usb hub will still send Attention messages
even after failing to reregister the Alt Mode. type_altmode_attention
currently does not verify whether or not a device's altmode partner
exists, which results in a NULL pointer error when dereferencing
the typec_altmode and typec_altmode_ops belonging to the altmode
partner.
Verify the presence of a device's altmode partner before sending
the Attention message to the Alt Mode driver.
Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera <rdbabiera@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230814180559.923475-1-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When sending Discover Identity messages to a Port Partner that uses Power
Delivery v2 and SVDM v1, we currently send PD v2 messages with SVDM v2.0,
expecting the port partner to respond with its highest supported SVDM
version as stated in Section 6.4.4.2.3 in the Power Delivery v3
specification. However, sending SVDM v2 to some Power Delivery v2 port
partners results in a NAK whereas sending SVDM v1 does not.
NAK messages can be handled by the initiator (PD v3 section 6.4.4.2.5.1),
and one solution could be to resend Discover Identity on a lower SVDM
version if possible. But, Section 6.4.4.3 of PD v2 states that "A NAK
response Should be taken as an indication not to retry that particular
Command."
Instead, we can set the SVDM version to the maximum one supported by the
negotiated PD revision. When operating in PD v2, this obeys Section
6.4.4.2.3, which states the SVDM field "Shall be set to zero to indicate
Version 1.0." In PD v3, the SVDM field "Shall be set to 01b to indicate
Version 2.0."
This fixes the following -Warray-bounds warning seen after building
ARM with multi_v7_defconfig (GCC 13):
In function 'brcm_avs_get_freq_table',
inlined from 'brcm_avs_cpufreq_init' at drivers/cpufreq/brcmstb-avs-cpufreq.c:623:15:
drivers/cpufreq/brcmstb-avs-cpufreq.c:449:28: warning: array subscript 5 is outside array bounds of 'void[60]' [-Warray-bounds=]
449 | table[i].frequency = CPUFREQ_TABLE_END;
In file included from include/linux/node.h:18,
from include/linux/cpu.h:17,
from include/linux/cpufreq.h:12,
from drivers/cpufreq/brcmstb-avs-cpufreq.c:44:
In function 'devm_kmalloc_array',
inlined from 'devm_kcalloc' at include/linux/device.h:328:9,
inlined from 'brcm_avs_get_freq_table' at drivers/cpufreq/brcmstb-avs-cpufreq.c:437:10,
inlined from 'brcm_avs_cpufreq_init' at drivers/cpufreq/brcmstb-avs-cpufreq.c:623:15:
include/linux/device.h:323:16: note: at offset 60 into object of size 60 allocated by 'devm_kmalloc'
323 | return devm_kmalloc(dev, bytes, flags);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -Warray-bounds.
We were reading the length of the scatterlist sg after copying value of
tsg inside.
So we are using the size of the previous scatterlist and for the first
one we are using an unitialised value.
Fix this by copying tsg in sg[0] before reading the size.
Fixes : 8a1012d3f2ab ("crypto: stm32 - Support for STM32 HASH module") Cc: stable@vger.kernel.org Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Building dasd_eckd.o with latest clang reveals this bug:
CC drivers/s390/block/dasd_eckd.o
drivers/s390/block/dasd_eckd.c:1082:3: warning: 'snprintf' will always be truncated;
specified size is 1, but format string expands to at least 11 [-Wfortify-source]
1082 | snprintf(print_uid, sizeof(*print_uid),
| ^
drivers/s390/block/dasd_eckd.c:1087:3: warning: 'snprintf' will always be truncated;
specified size is 1, but format string expands to at least 10 [-Wfortify-source]
1087 | snprintf(print_uid, sizeof(*print_uid),
| ^
Fix this by moving and using the existing UID_STRLEN for the arrays
that are being written to. Also rename UID_STRLEN to DASD_UID_STRLEN
to clarify its scope.
Fixes: 23596961b437 ("s390/dasd: split up dasd_eckd_read_conf") Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> # build Reported-by: Nathan Chancellor <nathan@kernel.org> Closes: https://github.com/ClangBuiltLinux/linux/issues/1923 Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20230828153142.2843753-2-hca@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OS installers are relying on /sys/firmware/ipl/has_secure to be
present on machines supporting secure boot. This file is present
for all IPL types, but not the unknown type, which prevents a secure
installation when an LPAR is booted in HMC via FTP(s), because
this is an unknown IPL type in linux. While at it, also add the secure
file.
Commit fb08a1908cb1 ("dax: simplify the dax_device <-> gendisk
association") introduced new logic for gendisk association, requiring
drivers to explicitly call dax_add_host() and dax_remove_host().
For dcssblk driver, some dax_remove_host() calls were missing, e.g. in
device remove path. The commit also broke error handling for out_dax case
in device add path, resulting in an extra put_device() w/o the previous
get_device() in that case.
This lead to stale xarray entries after device add / remove cycles. In the
case when a previously used struct gendisk pointer (xarray index) would be
used again, because blk_alloc_disk() happened to return such a pointer, the
xa_insert() in dax_add_host() would fail and go to out_dax, doing the extra
put_device() in the error path. In combination with an already flawed error
handling in dcssblk (device_register() cleanup), which needs to be
addressed in a separate patch, this resulted in a missing device_del() /
klist_del(), and eventually in the kernel crash with list_add corruption on
a subsequent device_add() / klist_add().
Fix this by adding the missing dax_remove_host() calls, and also move the
put_device() in the error path to restore the previous logic.
Interrupts are blocked in SDEI context, per the SDEI spec: "The client
interrupts cannot preempt the event handler." If we crashed in the SDEI
handler-running context (as with ACPI's AGDI) then we need to clean up the
SDEI state before proceeding to the crash kernel so that the crash kernel
can have working interrupts.
Track the active SDEI handler per-cpu so that we can COMPLETE_AND_RESUME
the handler, discarding the interrupted context.
Fixes: f5df26961853 ("arm64: kernel: Add arch-specific SDEI entry code and CPU masking") Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com> Cc: stable@vger.kernel.org Reviewed-by: James Morse <james.morse@arm.com> Tested-by: Mihai Carabas <mihai.carabas@oracle.com> Link: https://lore.kernel.org/r/20230627002939.2758-1-scott@os.amperecomputing.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit 30696378f68a ("pstore/ram: Do not treat empty buffers as
valid"), initialization would assume a prz was valid after seeing that
the buffer_size is zero (regardless of the buffer start position). This
unchecked start value means it could be outside the bounds of the buffer,
leading to future access panics when written to:
To avoid this, also check if the prz start is 0 during the initialization
phase. If not, the next prz sanity check case will discover it (start >
size) and zap the buffer back to a sane state.
Fixes: 30696378f68a ("pstore/ram: Do not treat empty buffers as valid") Cc: Yunlong Xing <yunlong.xing@unisoc.com> Cc: stable@vger.kernel.org Signed-off-by: Enlin Mu <enlin.mu@unisoc.com> Link: https://lore.kernel.org/r/20230801060432.1307717-1-yunlong.xing@unisoc.com
[kees: update commit log with backtrace and clarifications] Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IRQs should be ready to serve when we call mmc_add_host() via
tmio_mmc_host_probe(). To achieve that, ensure that all irqs are masked
before registering the handlers.
The Instruction Fetch (IF) units on current AMD Zen-based systems do not
guarantee a synchronous #MC is delivered for poison consumption errors.
Therefore, MCG_STATUS[EIPV|RIPV] will not be set. However, the
microarchitecture does guarantee that the exception is delivered within
the same context. In other words, the exact rIP is not known, but the
context is known to not have changed.
There is no architecturally-defined method to determine this behavior.
The Code Segment (CS) register is always valid on such IF unit poison
errors regardless of the value of MCG_STATUS[EIPV|RIPV].
Add a quirk to save the CS register for poison consumption from the IF
unit banks.
This is needed to properly determine the context of the error.
Otherwise, the severity grading function will assume the context is
IN_KERNEL due to the m->cs value being 0 (the initialized value). This
leads to unnecessary kernel panics on data poison errors due to the
kernel believing the poison consumption occurred in kernel context.
If an fsverity builtin signature is given for a file but the
".fs-verity" keyring is empty, there's no real reason to run the PKCS#7
parser. Skip this to avoid the PKCS#7 attack surface when builtin
signature support is configured into the kernel but is not being used.
This is a hardening improvement, not a fix per se, but I've added
Fixes and Cc stable to get it out to more users.
Fixes: 432434c9f8e1 ("fs-verity: support builtin file signatures") Cc: stable@vger.kernel.org Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/r/20230820173237.2579-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The goal is to support a bpf_redirect() from an ethernet device (ingress)
to a ppp device (egress).
The l2 header is added automatically by the ppp driver, thus the ethernet
header should be removed.
CC: stable@vger.kernel.org Fixes: 27b29f63058d ("bpf: add bpf_redirect() helper") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Siwar Zitouni <siwar.zitouni@6wind.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
enc_dec_hypercall() accepted a page count instead of a size, which
forced its callers to round up. As a result, non-page aligned
vaddrs caused pages to be spuriously marked as decrypted via the
encryption status hypercall, which in turn caused consistent
corruption of pages during live migration. Live migration requires
accurate encryption status information to avoid migrating pages
from the wrong perspective.
Fixes: 064ce6c550a0 ("mm: x86: Invoke hypercall when page encryption status is changed") Signed-off-by: Steve Rutherford <srutherford@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com> Tested-by: Ben Hillier <bhillier@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230824223731.2055016-1-srutherford@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There was a previous attempt to fix an out-of-bounds access in the DCCP
error handlers, but that fix assumed that the error handlers only want
to access the first 8 bytes of the DCCP header. Actually, they also look
at the DCCP sequence number, which is stored beyond 8 bytes, so an
explicit pskb_may_pull() is required.
Fixes: 6706a97fec96 ("dccp: fix out of bound access in dccp_v4_err()") Fixes: 1aa9d1a0e7ee ("ipv6: dccp: fix out of bound access in dccp_v6_err()") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All posix lock ops, for all lockspaces (gfs2 file systems) are
sent to userspace (dlm_controld) through a single misc device.
The dlm_controld daemon reads the ops from the misc device
and sends them to other cluster nodes using separate, per-lockspace
cluster api communication channels. The ops for a single lockspace
are ordered at this level, so that the results are received in
the same sequence that the requests were sent. When the results
are sent back to the kernel via the misc device, they are again
funneled through the single misc device for all lockspaces. When
the dlm code in the kernel processes the results from the misc
device, these results will be returned in the same sequence that
the requests were sent, on a per-lockspace basis. A recent change
in this request/reply matching code missed the "per-lockspace"
check (fsid comparison) when matching request and reply, so replies
could be incorrectly matched to requests from other lockspaces.
Cc: stable@vger.kernel.org Reported-by: Barry Marson <bmarson@redhat.com> Fixes: 57e2c2f2d94c ("fs: dlm: fix mismatch of plock results from userspace") Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After we converted the capabilities of our networking-bpf program from
cap_sys_admin to cap_net_admin+cap_bpf, our networking-bpf program
failed to start. Because it failed the bpf verifier, and the error log
is "R3 pointer comparison prohibited".
A benchmark stress test (12-40 machines x 48hours) found that DCN315 has
cases where DC writes to an indirect register to set the smu clock msg
id, but when we go to read the same indirect register the returned msg
id doesn't match with what we just set it to. So, to fix this retry the
write until the register's value matches with the requested value.
Cc: stable@vger.kernel.org # 6.1+ Fixes: f94903996140 ("drm/amd/display: Add DCN315 CLK_MGR") Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Fudong Wang <fudong.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The lscpu command is broken since commit cab56b51ec0e ("parisc: Fix
device names in /proc/iomem") added the PA pathname to all PA
devices, includig the CPUs.
lscpu parses /proc/cpuinfo and now believes it found different CPU
types since every CPU is listed with an unique identifier (PA
pathname).
Fix this problem by simply dropping the PA pathname when listing the
CPUs in /proc/cpuinfo. There is no need to show the pathname in this
procfs file.
Due to an oversight in commit 1b3044e39a89 ("procfs: fix pthread
cross-thread naming if !PR_DUMPABLE") in switching from REG to NOD,
chmod operations on /proc/thread-self/comm were no longer blocked as
they are on almost all other procfs files.
A very similar situation with /proc/self/environ was used to as a root
exploit a long time ago, but procfs has SB_I_NOEXEC so this is simply a
correctness issue.
Ref: https://lwn.net/Articles/191954/
Ref: 6d76fa58b050 ("Don't allow chmod() on the /proc/<pid>/ files") Fixes: 1b3044e39a89 ("procfs: fix pthread cross-thread naming if !PR_DUMPABLE") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Message-Id: <20230713141001.27046-1-cyphar@cyphar.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit a33df75c6328 ("block: use an xarray for disk->part_tbl") remove
disk_expand_part_tbl() in add_partition(), which means all kinds of
devices will support extended dynamic `dev_t`.
However, some devices with GENHD_FL_NO_PART are not expected to add or
resize partition.
Fix this by adding check of GENHD_FL_NO_PART before add or resize
partition.
Fixes: a33df75c6328 ("block: use an xarray for disk->part_tbl") Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230831075900.1725842-1-lilingfeng@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
d5af729dc207 ("PCI: Mark NVIDIA T4 GPUs to avoid bus reset") avoided
Secondary Bus Reset on the T4 because the reset seemed to not work when the
T4 was directly attached to a Root Port.
But NVIDIA thinks the issue is probably related to some issue with the Root
Port, not with the T4. The T4 provides neither PM nor FLR reset, so
masking bus reset compromises this device for assignment scenarios.
Revert d5af729dc207 as requested by Wu Zongyong. This will leave SBR
broken in the specific configuration Wu tested, as it was in v6.5, so Wu
will debug that further.
ntb_transport_tx_free_entry() never returns 0 with the current
calculation. If head == tail, then it would return qp->tx_max_entry.
Change compare to tail >= head and when they are equal, a 0 would be
returned.
Fixes: e74bfeedad08 ("NTB: Add flow control to the ntb_netdev") Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: renlonglong <ren.longlong@h3c.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The tx tail index is not reset when the link goes down. This causes the
tail index to go out of sync when the link goes down and comes back up.
Refactor the ntb_qp_link_down_reset() and reset the tail index as well.
Fixes: 2849b5d70641 ("NTB: Reset transport QP link stats on down") Reported-by: Yuan Y Lu <yuan.y.lu@intel.com> Tested-by: Yuan Y Lu <yuan.y.lu@intel.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently when the transport receive packets after netdev has closed the
transport returns error and triggers tx errors to be incremented and
carrier to be stopped. There is no reason to return error if the device is
already closed. Drop the packet and return 0.
Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers") Reported-by: Yuan Y Lu <yuan.y.lu@intel.com> Tested-by: Yuan Y Lu <yuan.y.lu@intel.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For a device with no Power Management Capability, pci_power_up() previously
returned 0 (success) if the platform was able to put the device in D0,
which led to pci_set_full_power_state() trying to read PCI_PM_CTRL, even
though it doesn't exist.
Since dev->pm_cap == 0 in this case, pci_set_full_power_state() actually
read the wrong register, interpreted it as PCI_PM_CTRL, and corrupted
dev->current_state. This led to messages like this in some cases:
pci 0000:01:00.0: Refused to change power state from D3hot to D0
To prevent this, make pci_power_up() always return a negative failure code
if the device lacks a Power Management Capability, even if non-PCI platform
power management has been able to put the device in D0. The failure will
prevent pci_set_full_power_state() from trying to access PCI_PM_CTRL.
When a Linux VM with an assigned PCI device runs on Hyper-V, if the PCI
device driver is not loaded yet (i.e. MSI-X/MSI is not enabled on the
device yet), doing a VM hibernation triggers a panic in
hv_pci_restore_msi_msg() -> msi_lock_descs(&pdev->dev), because
pdev->dev.msi.data is still NULL.
Avoid the panic by checking if MSI-X/MSI is enabled.
Link: https://lore.kernel.org/r/20230816175939.21566-1-decui@microsoft.com Fixes: dc2b453290c4 ("PCI: hv: Rework MSI handling") Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: sathyanarayanan.kuppuswamy@linux.intel.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver retries certain register reads 3 times if the returned value is
0. This was done because the controller could return 0 for certain
registers if other registers were being accessed concurrently by the BMC.
In certain systems with increased BMC interactions, the register values
returned can be 0 for longer than 3 retries. Change the retry count from 3
to 30 for the affected registers to prevent problems with out-of-band
management.
Fixes: b899202901a8 ("scsi: mpt3sas: Add separate function for aero doorbell reads") Cc: stable@vger.kernel.org Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20230829090020.5417-2-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 9011e49d54dc ("modules: only allow symbol_get of
EXPORT_SYMBOL_GPL modules") the use of symbol_get is properly restricted
to GPL-only marked symbols. This interacts oddly with the DVB logic
which only uses dvb_attach() to load the dvb driver which then uses
symbol_get().
Fix this up by properly marking all of the dvb_attach attach symbols as
EXPORT_SYMBOL_GPL().
Fixes: 9011e49d54dc ("modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules") Cc: stable <stable@kernel.org> Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: linux-media@vger.kernel.org Cc: linux-modules@vger.kernel.org Acked-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://lore.kernel.org/r/20230908092035.3815268-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Recently in v6.3-rc1 there was a change affecting behaviour of hrtimers
(commit 0c52310f260014d95c1310364379772cb74cf82d) and causing
few issues on platforms with two CS42L42 codecs. Canonical/Dell
has reported an issue with Vostro-3910.
We need to increase this value by 15ms.
Although commit c2c24edb1d9c ("arm64: csum: Fix pathological zero-length
calls") added an early return for zero-length input, syzkaller has
popped up with an example of a _negative_ length which causes an
undefined shift and an out-of-bounds read:
I3C masters are expected to support hot-join. This means at initialization
time we might not yet discover any device and this should not be treated
as a fatal error.
During the DAA procedure which happens at probe time, if no device has
joined, all CCC will be NACKed (from a bus perspective). This leads to an
early return with an error code which fails the probe of the master.
Let's avoid this by just telling the core through an I3C_ERROR_M2
return command code that no device was discovered, which is a valid
situation. This way the master will no longer bail out and fail to probe
for a wrong reason.
As made mention of in commit 099303e9a9bd ("drm/amd/display: eDP
intermittent black screen during PnP"), we need to turn off the
display's backlight before powering off an eDP display. Not doing so
will result in undefined behaviour according to the eDP spec. So, set
DCN301's edp_backlight_control() function pointer to
dce110_edp_backlight_control().
Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2765 Fixes: 9c75891feef0 ("drm/amd/display: rework recent update PHY state commit") Suggested-by: Swapnil Patel <swapnil.patel@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Struct lv5207lp_platform_data refers to a platform device within
the Linux device hierarchy. The test in lv5207lp_backlight_check_fb()
compares it against the fbdev device in struct fb_info.dev, which
is different. Fix the test by comparing to struct fb_info.device.
Fixes a bug in the backlight driver and prepares fbdev for making
struct fb_info.dev optional.
v2:
* move renames into separate patch (Javier, Sam, Michael)
Fixes: 82e5c40d88f9 ("backlight: Add Sanyo LV5207LP backlight driver") Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Lee Jones <lee@kernel.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: linux-sh@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v3.12+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-6-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Struct bd6107_platform_data refers to a platform device within
the Linux device hierarchy. The test in bd6107_backlight_check_fb()
compares it against the fbdev device in struct fb_info.dev, which
is different. Fix the test by comparing to struct fb_info.device.
Fixes a bug in the backlight driver and prepares fbdev for making
struct fb_info.dev optional.
v2:
* move renames into separate patch (Javier, Sam, Michael)
Fixes: 67b43e590415 ("backlight: Add ROHM BD6107 backlight driver") Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Lee Jones <lee@kernel.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v3.12+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-2-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Struct gpio_backlight_platform_data refers to a platform device within
the Linux device hierarchy. The test in gpio_backlight_check_fb()
compares it against the fbdev device in struct fb_info.dev, which
is different. Fix the test by comparing to struct fb_info.device.
Fixes a bug in the backlight driver and prepares fbdev for making
struct fb_info.dev optional.
v2:
* move renames into separate patch (Javier, Sam, Michael)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 8b770e3c9824 ("backlight: Add GPIO-based backlight driver") Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Rich Felker <dalias@libc.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Lee Jones <lee@kernel.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: linux-sh@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v3.12+ Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-4-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is possible for xa_load() to observe a sibling entry pointing to
another sibling entry. An example:
Thread A: Thread B:
xa_store_range(xa, entry, 188, 191, gfp);
xa_load(xa, 191);
entry = xa_entry(xa, node, 63);
[entry is a sibling of 188]
xa_store_range(xa, entry, 184, 191, gfp);
if (xa_is_sibling(entry))
offset = xa_to_sibling(entry);
entry = xa_entry(xas->xa, node, offset);
[entry is now a sibling of 184]
It is sufficient to go around this loop until we hit a non-sibling entry.
Sibling entries always point earlier in the node, so we are guaranteed
to terminate this search.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Fixes: 6b24ca4a1a8d ("mm: Use multi-index entries in the page cache") Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If function pwrdm_read_prev_pwrst() returns -EINVAL, we will end
up accessing array pwrdm->state_counter through negative index
-22. This is wrong and the compiler is legitimately warning us
about this potential problem.
Fix this by sanity checking the value stored in variable _prev_
before accessing array pwrdm->state_counter.
Address the following -Warray-bounds warning:
arch/arm/mach-omap2/powerdomain.c:178:45: warning: array subscript -22 is below array bounds of 'unsigned int[4]' [-Warray-bounds]
Link: https://github.com/KSPP/linux/issues/307 Fixes: ba20bb126940 ("OMAP: PM counter infrastructure.") Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/20230607050639.LzbPn%25lkp@intel.com/ Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Message-ID: <ZIFVGwImU3kpaGeH@work> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The problem was that when an error occurred before handlers registration
and after allocating `new_smi->si_sm`, the variable wouldn't be freed in
the error handling afterwards since `shutdown_smi()` hadn't been
registered yet. Fix it by adding a `kfree()` in the error handling path
in `try_smi_init()`.
Cc: stable@vger.kernel.org # 4.19+ Fixes: 7960f18a5647 ("ipmi_si: Convert over to a shutdown handler") Signed-off-by: Yi Yang <yiyang13@huawei.com> Co-developed-by: GONG, Ruiqi <gongruiqi@huaweicloud.com> Signed-off-by: GONG, Ruiqi <gongruiqi@huaweicloud.com>
Message-Id: <20230629123328.2402075-1-gongruiqi@huaweicloud.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A 32-bit mask was used on the 64-bit PCI address used for mapping MSIs.
This would result in the upper 32 bits being unintentionally zeroed and
MSIs getting mapped to incorrect PCI addresses if the address had any
of the upper bits set.
Replace 32-bit mask by appropriate 64-bit mask.
[kwilczynski: use GENMASK_ULL() over GENMASK() for 32-bit compatibility] Fixes: dc73ed0f1b8b ("PCI: rockchip: Fix window mapping and address translation for endpoint") Closes: https://lore.kernel.org/linux-pci/8d19e5b7-8fa0-44a4-90e2-9bb06f5eb694@moroto.mountain Link: https://lore.kernel.org/linux-pci/20230703085845.2052008-1-rick.wertenbroek@gmail.com Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Select V4L2_FWNODE and VIDEO_V4L2_SUBDEV_API for all sensor drivers. This
also adds the options to drivers that don't specifically need them, these
are still seldom used drivers using old APIs. The upside is that these
should now all compile --- many drivers have had missing dependencies.
The "menu" is replaced by selectable "menuconfig" to select the needed
V4L2_FWNODE and VIDEO_V4L2_SUBDEV_API options.
Also select MEDIA_CONTROLLER which VIDEO_V4L2_SUBDEV_API effectively
depends on, and add the I2C dependency to the menu.
Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@vger.kernel.org # for >= 6.1 Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/media/i2c/ccs/ccs-data.c:524 ccs_data_parse_rules() warn: address
of NULL pointer 'rules'
The CCS static data rule parser does not check an if rule has been
obtained before checking for other rule types (which depend on the if
rule). In practice this means parsing invalid CCS static data could lead
to dereferencing a NULL pointer.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Fixes: a6b396f410b1 ("media: ccs: Add CCS static data parser library") Cc: stable@vger.kernel.org # for 5.11 and up Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiongfeng reported and debugged a self deadlock of the task which initiates
and controls a CPU hot-unplug operation vs. the CFS bandwidth timer.
CPU1 CPU2
T1 sets cfs_quota
starts hrtimer cfs_bandwidth 'period_timer'
T1 is migrated to CPU2
T1 initiates offlining of CPU1
Hotplug operation starts
...
'period_timer' expires and is re-enqueued on CPU1
...
take_cpu_down()
CPU1 shuts down and does not handle timers
anymore. They have to be migrated in the
post dead hotplug steps by the control task.
T1 runs the post dead offline operation
T1 is scheduled out
T1 waits for 'period_timer' to expire
T1 waits there forever if it is scheduled out before it can execute the hrtimer
offline callback hrtimers_dead_cpu().
Cure this by delegating the hotplug control operation to a worker thread on
an online CPU. This takes the initiating user space task, which might be
affected by the bandwidth timer, completely out of the picture.
It is unsafe to dump vmalloc area information when trying to do so from
some contexts. Add a safer trylock version of the same function to do a
best-effort VMA finding and use it from vmalloc_dump_obj().
[applied test robot feedback on unused function fix.]
[applied Uladzislau feedback on locking.] Link: https://lkml.kernel.org/r/20230904180806.1002832-1-joel@joelfernandes.org Fixes: 98f180837a89 ("mm: Make mem_dump_obj() handle vmalloc() memory") Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Reported-by: Zhen Lei <thunder.leizhen@huaweicloud.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Zqiang <qiang.zhang1211@gmail.com> Cc: <stable@vger.kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because scsi_finish_command() subtracts the residual from the buffer
length, residual overflows must not be reported. Reflect this in the SCSI
documentation. See also commit 9237f04e12cc ("scsi: core: Fix
scsi_get/set_resid() interface")
Cc: Damien Le Moal <dlemoal@kernel.org> Cc: Hannes Reinecke <hare@suse.de> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: stable@vger.kernel.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230721160154.874010-2-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If an output buffer size exceeded U16_MAX, the min_t(u16, ...) cast in
copy_data() was causing writes to truncate. This manifested as output
bytes being skipped, seen as %NUL bytes in pstore dumps when the available
record size was larger than 65536. Fix the cast to no longer truncate
the calculation.
Currently, for double invoke call_rcu(), will dump rcu_head objects memory
info, if the objects is not allocated from the slab allocator, the
vmalloc_dump_obj() will be invoke and the vmap_area_lock spinlock need to
be held, since the call_rcu() can be invoked in interrupt context,
therefore, there is a possibility of spinlock deadlock scenarios.
And in Preempt-RT kernel, the rcutorture test also trigger the following
lockdep warning:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1, name: swapper/0
preempt_count: 1, expected: 0
RCU nest depth: 1, expected: 1
3 locks held by swapper/0/1:
#0: ffffffffb534ee80 (fullstop_mutex){+.+.}-{4:4}, at: torture_init_begin+0x24/0xa0
#1: ffffffffb5307940 (rcu_read_lock){....}-{1:3}, at: rcu_torture_init+0x1ec7/0x2370
#2: ffffffffb536af40 (vmap_area_lock){+.+.}-{3:3}, at: find_vmap_area+0x1f/0x70
irq event stamp: 565512
hardirqs last enabled at (565511): [<ffffffffb379b138>] __call_rcu_common+0x218/0x940
hardirqs last disabled at (565512): [<ffffffffb5804262>] rcu_torture_init+0x20b2/0x2370
softirqs last enabled at (399112): [<ffffffffb36b2586>] __local_bh_enable_ip+0x126/0x170
softirqs last disabled at (399106): [<ffffffffb43fef59>] inet_register_protosw+0x9/0x1d0
Preemption disabled at:
[<ffffffffb58040c3>] rcu_torture_init+0x1f13/0x2370
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.5.0-rc4-rt2-yocto-preempt-rt+ #15
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x68/0xb0
dump_stack+0x14/0x20
__might_resched+0x1aa/0x280
? __pfx_rcu_torture_err_cb+0x10/0x10
rt_spin_lock+0x53/0x130
? find_vmap_area+0x1f/0x70
find_vmap_area+0x1f/0x70
vmalloc_dump_obj+0x20/0x60
mem_dump_obj+0x22/0x90
__call_rcu_common+0x5bf/0x940
? debug_smp_processor_id+0x1b/0x30
call_rcu_hurry+0x14/0x20
rcu_torture_init+0x1f82/0x2370
? __pfx_rcu_torture_leak_cb+0x10/0x10
? __pfx_rcu_torture_leak_cb+0x10/0x10
? __pfx_rcu_torture_init+0x10/0x10
do_one_initcall+0x6c/0x300
? debug_smp_processor_id+0x1b/0x30
kernel_init_freeable+0x2b9/0x540
? __pfx_kernel_init+0x10/0x10
kernel_init+0x1f/0x150
ret_from_fork+0x40/0x50
? __pfx_kernel_init+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
The previous patch fixes this by using the deadlock-safe best-effort
version of find_vm_area. However, in case of failure print the fact that
the pointer was a vmalloc pointer so that we print at least something.
Link: https://lkml.kernel.org/r/20230904180806.1002832-2-joel@joelfernandes.org Fixes: 98f180837a89 ("mm: Make mem_dump_obj() handle vmalloc() memory") Signed-off-by: Zqiang <qiang.zhang1211@gmail.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reported-by: Zhen Lei <thunder.leizhen@huaweicloud.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The update of rate_num/den and msbits were factored out to
fixup_unreferenced_params() function to be called explicitly after the
hw_refine or hw_params procedure. It's called from
snd_pcm_hw_refine_user(), but it's forgotten in the PCM compat ioctl.
This ended up with the incomplete rate_num/den and msbits parameters
when 32bit compat ioctl is used.
This patch adds the missing call in snd_pcm_ioctl_hw_params_compat().
Increase the RX buffer size to 3K when the SBP bit is on. The size of
the RX buffer determines the number of pages allocated which may not
be sufficient for receive frames larger than the set MTU size.
Cc: stable@vger.kernel.org Fixes: 89eaefb61dc9 ("igb: Support RX-ALL feature flag.") Reported-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com> Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit bf5c25d60861 ("skbuff: in skb_segment, call zerocopy functions
once per nskb") added the call to zero copy functions in skb_segment().
The change introduced a bug in skb_segment() because skb_orphan_frags()
may possibly change the number of fragments or allocate new fragments
altogether leaving nrfrags and frag to point to the old values. This can
cause a panic with stacktrace like the one below.
In this case calling skb_orphan_frags() updated nr_frags leaving nrfrags
local variable in skb_segment() stale. This resulted in the code hitting
i >= nrfrags prematurely and trying to move to next frag_skb using
list_skb pointer, which was NULL, and caused kernel panic. Move the call
to zero copy functions before using frags and nr_frags.
Fixes: bf5c25d60861 ("skbuff: in skb_segment, call zerocopy functions once per nskb") Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com> Reported-by: Amit Goyal <agoyal@purestorage.com> Cc: stable@vger.kernel.org Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The xt_u32 module doesn't validate the fields in the xt_u32 structure.
An attacker may take advantage of this to trigger an OOB read by setting
the size fields with a value beyond the arrays boundaries.
Add a checkentry function to validate the structure.
This was originally reported by the ZDI project (ZDI-CAN-18408).
The missing IP_SET_HASH_WITH_NET0 macro in ip_set_hash_netportnet can
lead to the use of wrong `CIDR_POS(c)` for calculating array offsets,
which can lead to integer underflow. As a result, it leads to slab
out-of-bound access.
This patch adds back the IP_SET_HASH_WITH_NET0 macro to
ip_set_hash_netportnet to address the issue.
This is a follow up of commit 915d975b2ffa ("net: deal with integer
overflows in kmalloc_reserve()") based on David Laight feedback.
Back in 2010, I failed to realize malicious users could set dev->mtu
to arbitrary values. This mtu has been since limited to 0x7fffffff but
regardless of how big dev->mtu is, it makes no sense for igmpv3_newpack()
to allocate more than IP_MAX_MTU and risk various skb fields overflows.
Fixes: 57e1ab6eaddc ("igmp: refine skb allocations") Link: https://lore.kernel.org/netdev/d273628df80f45428e739274ab9ecb72@AcuMS.aculab.com/ Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: David Laight <David.Laight@ACULAB.COM> Cc: Kyle Zeng <zengyhkyle@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In current packed virtqueue implementation, the avail_wrap_counter won't
flip, in the case when the driver supplies a descriptor chain with a
length equals to the queue size; total_sg == vq->packed.vring.num.
Let’s assume the following situation:
vq->packed.vring.num=4
vq->packed.next_avail_idx: 1
vq->packed.avail_wrap_counter: 0
Then the driver adds a descriptor chain containing 4 descriptors.
We expect the following result with avail_wrap_counter flipped:
vq->packed.next_avail_idx: 1
vq->packed.avail_wrap_counter: 1
But, the current implementation gives the following result:
vq->packed.next_avail_idx: 1
vq->packed.avail_wrap_counter: 0
To reproduce the bug, you can set a packed queue size as small as
possible, so that the driver is more likely to provide a descriptor
chain with a length equal to the packed queue size. For example, in
qemu run following commands:
sudo qemu-system-x86_64 \
-enable-kvm \
-nographic \
-kernel "path/to/kernel_image" \
-m 1G \
-drive file="path/to/rootfs",if=none,id=disk \
-device virtio-blk,drive=disk \
-drive file="path/to/disk_image",if=none,id=rwdisk \
-device virtio-blk,drive=rwdisk,packed=on,queue-size=4,\
indirect_desc=off \
-append "console=ttyS0 root=/dev/vda rw init=/bin/bash"
Inside the VM, create a directory and mount the rwdisk device on it. The
rwdisk will hang and mount operation will not complete.
This commit fixes the wrap counter error by flipping the
packed.avail_wrap_counter, when start of descriptor chain equals to the
end of descriptor chain (head == i).
Fixes: 1ce9e6055fa0 ("virtio_ring: introduce packed ring support") Signed-off-by: Yuan Yao <yuanyaogoog@chromium.org>
Message-Id: <20230808051110.3492693-1-yuanyaogoog@chromium.org> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The field 'transition_task' of policy structure is used to track the
task which is performing the frequency transition. Using this field to
print a warning once detect a case where the same task is calling
_begin() again before completing the preivous frequency transition via
the _end().
However, there is a potential race condition in _end() and _begin() APIs
while updating the field 'transition_task' of policy, the scenario is
depicted below:
Task A Task B
/* 1st freq transition */
Invoke _begin() {
...
...
}
/* 2nd freq transition */
Invoke _begin() {
... //waiting for A to
... //clear
... //transition_ongoing
... //in _end() for
... //the 1st transition
|
Change the frequency |
|
Invoke _end() { |
... |
... |
transition_ongoing = false; V
transition_ongoing = true;
transition_task = current;
transition_task = NULL;
... //A overwrites the task
... //performing the transition
... //result in error warning.
}
To fix this race condition, the transition_lock of policy structure is
now acquired before updating policy structure in _end() API. Which ensure
that only one task can update the 'transition_task' field at a time.
Link: https://lore.kernel.org/all/b3c61d8a-d52d-3136-fbf0-d1de9f1ba411@huawei.com/ Fixes: ca654dc3a93d ("cpufreq: Catch double invocations of cpufreq_freq_transition_begin/end") Signed-off-by: Liao Chang <liaochang1@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since the commit referenced in the Fixes: tag below the VMBus client driver
is walking the ACPI namespace up from the VMBus ACPI device to the ACPI
namespace root object trying to find Hyper-V MMIO ranges.
However, if it is not able to find them it ends trying to walk resources of
the ACPI namespace root object itself.
This object has all-ones handle, which causes a NULL pointer dereference
in the ACPI code (from dereferencing this pointer with an offset).
This in turn causes an oops on boot with VMBus host implementations that do
not provide Hyper-V MMIO ranges in their VMBus ACPI device or its
ancestors.
The QEMU VMBus implementation is an example of such implementation.
I guess providing these ranges is optional, since all tested Windows
versions seem to be able to use VMBus devices without them.
Fix this by explicitly terminating the lookup at the ACPI namespace root
object.
Note that Linux guests under KVM/QEMU do not use the Hyper-V PV interface
by default - they only do so if the KVM PV interface is missing or
disabled.
Use "select" to ensure that the required kconfig symbols are set
as expected.
Drop HOSTAUDIO since it is now equivalent to UML_SOUND.
Set CONFIG_SOUND=m in ARCH=um defconfig files to maintain the
status quo of the default configs.
Allow SOUND with UML regardless of HAS_IOMEM. Otherwise there is a
kconfig warning for unmet dependencies. (This was not an issue when
SOUND was defined in arch/um/drivers/Kconfig. I have done 50 randconfig
builds and didn't find any issues.)
This fixes build errors when CONFIG_SOUND is not set:
ld: arch/um/drivers/hostaudio_kern.o: in function `hostaudio_cleanup_module':
hostaudio_kern.c:(.exit.text+0xa): undefined reference to `unregister_sound_mixer'
ld: hostaudio_kern.c:(.exit.text+0x15): undefined reference to `unregister_sound_dsp'
ld: arch/um/drivers/hostaudio_kern.o: in function `hostaudio_init_module':
hostaudio_kern.c:(.init.text+0x19): undefined reference to `register_sound_dsp'
ld: hostaudio_kern.c:(.init.text+0x31): undefined reference to `register_sound_mixer'
ld: hostaudio_kern.c:(.init.text+0x49): undefined reference to `unregister_sound_dsp'
and this kconfig warning:
WARNING: unmet direct dependencies detected for SOUND
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Fixes: d886e87cb82b ("sound: make OSS sound core optional") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Closes: lore.kernel.org/r/202307141416.vxuRVpFv-lkp@intel.com Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: linux-um@lists.infradead.org Cc: Tejun Heo <tj@kernel.org> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nicolas Schier <nicolas@fjasle.eu> Cc: linux-kbuild@vger.kernel.org Cc: alsa-devel@alsa-project.org Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
The tty LED trigger uses the obsolete LED_ON & LED_OFF constants when
setting LED brightness. This is bad because the LED_ON constant is equal
to 1, and so when activating the tty LED trigger on a LED class device
with max_brightness greater than 1, the LED is dimmer than it can be
(when max_brightness is 255, the LED is very dimm indeed; some devices
translate 1/255 to 0, so the LED is OFF all the time).
Instead of directly setting brightness to a specific value, use the
led_blink_set_oneshot() function from LED core to configure the blink.
This function takes the current configured brightness as blink
brightness if not zero, and max brightness otherwise.
This also changes the behavior of the TTY LED trigger. Previously if
rx/tx stats kept changing, the LED was ON all the time they kept
changing. With this patch the LED will blink on TTY activity.
Fixes: fd4a641ac88f ("leds: trigger: implement a tty trigger") Signed-off-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20230802090753.13611-1-kabel@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Given channel intensity, LED brightness and max LED brightness, the
multicolor LED framework helper led_mc_calc_color_components() computes
the color channel brightness as
Consider the situation when (brightness, intensity, max_brightness) is
for example (16, 15, 255), then chan_brightness is computed to 0
although the fractional divison would give 0.94, which should be rounded
to 1.
Use DIV_ROUND_CLOSEST here for the division to give more realistic
component computation:
Fixes: 55d5d3b46b08 ("leds: multicolor: Introduce a multicolor class definition") Signed-off-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20230801124931.8661-1-kabel@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Negative -EINVAL was intended, not positive EINVAL. Fix it.
Fixes: 95138e01275e ("leds: pwm: Make error handling more robust") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/a33b981a-b2c4-4dc2-b00a-626a090d2f11@moroto.mountain Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
inno_write is used to configure 0xaa reg, that also hold the
POST_PLL_POWER_DOWN bit.
When POST_PLL_REFCLK_SEL_TMDS is configured the power down bit is not
taken into consideration.
Fix this by keeping the power down bit until configuration is complete.
Also reorder the reg write order for consistency.
inno_hdmi_phy_rk3328_clk_recalc_rate() is returning a rate not found
in the pre pll config table when the fractal divider is used.
This can prevent proper power_on because a tmdsclock for the new rate
is not found in the pre pll config table.
Fix this by saving and returning a rounded pixel rate that exist
in the pre pll config table.
projects / linux-stable / log