commit ef8dd01538ea ("genirq/msi: Make interrupt allocation less
convoluted"), reworked the code so that the x86 specific quirk for affinity
setting of non-maskable PCI/MSI interrupts is not longer activated if
necessary.
This could be solved by restoring the original logic in the core MSI code,
but after a deeper analysis it turned out that the quirk flag is not
required at all.
The quirk is only required when the PCI/MSI device cannot mask the MSI
interrupts, which in turn also prevents reservation mode from being enabled
for the affected interrupt.
This allows ot remove the NOMASK quirk bit completely as msi_set_affinity()
can instead check whether reservation mode is enabled for the interrupt,
which gives exactly the same answer.
Even in the momentary non-existing case that the reservation mode would be
not set for a maskable MSI interrupt this would not cause any harm as it
just would cause msi_set_affinity() to go needlessly through the
functionaly equivalent slow path, which works perfectly fine with maskable
interrupts as well.
Rework msi_set_affinity() to query the reservation mode and remove all
NOMASK quirk logic from the core code.
[ tglx: Massaged changelog ]
Fixes: ef8dd01538ea ("genirq/msi: Make interrupt allocation less convoluted") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Koichiro Den <den@valinux.co.jp> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231026032036.2462428-1-den@valinux.co.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Today the percpu struct vcpu_info is allocated via DEFINE_PER_CPU(),
meaning that it could cross a page boundary. In this case registering
it with the hypervisor will fail, resulting in a panic().
This can easily be fixed by using DEFINE_PER_CPU_ALIGNED() instead,
as struct vcpu_info is guaranteed to have a size of 64 bytes, matching
the cache line size of x86 64-bit processors (Xen doesn't support
32-bit processors).
There are several functions involved for performing the functionality
of evtchn_do_upcall():
- __xen_evtchn_do_upcall() doing the real work
- xen_hvm_evtchn_do_upcall() just being a wrapper for
__xen_evtchn_do_upcall(), exposed for external callers
- xen_evtchn_do_upcall() calling __xen_evtchn_do_upcall(), too, but
without any user
Simplify this maze by:
- removing the unused xen_evtchn_do_upcall()
- removing xen_hvm_evtchn_do_upcall() as the only left caller of
__xen_evtchn_do_upcall(), while renaming __xen_evtchn_do_upcall() to
xen_evtchn_do_upcall()
When we don't use the per-CPU vector callback, we ask Xen to deliver event
channel interrupts as INTx on the PCI platform device. As such, it can be
shared with INTx on other PCI devices.
Set IRQF_SHARED, and make it return IRQ_HANDLED or IRQ_NONE according to
whether the evtchn_upcall_pending flag was actually set. Now I can share
the interrupt:
Drop the IRQF_TRIGGER_RISING. It has no effect when the IRQ is shared,
and besides, the only effect it was having even beforehand was to trigger
a debug message in both I/OAPIC and legacy PIC cases:
[ 0.915441] genirq: No set_type function for IRQ 11 (IO-APIC)
[ 0.951939] genirq: No set_type function for IRQ 11 (XT-PIC)
The original change results in a deadlock if jumbo mtu mode is used.
Reason is that the phydev lock is held when rtl_reset_work() is called
here, and rtl_jumbo_config() calls phy_start_aneg() which also tries
to acquire the phydev lock. Fix this by calling rtl_reset_work()
asynchronously.
Fixes: 621735f59064 ("r8169: fix rare issue with broken rx after link-down on RTL8125") Reported-by: Ian Chen <free122448@hotmail.com> Tested-by: Ian Chen <free122448@hotmail.com> Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/caf6a487-ef8c-4570-88f9-f47a659faf33@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There are still single reports of systems where ASPM incompatibilities
cause tx timeouts. It's not clear whom to blame, so let's disable
ASPM in case of a tx timeout.
v2:
- add one-time warning for informing the user
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/92369a92-dc32-4529-0509-11459ba0e391@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 59d395ed606d ("r8169: fix deadlock on RTL8125 in jumbo mtu mode") Signed-off-by: Sasha Levin <sashal@kernel.org>
The shaper LUT requires a 10-bit value of the delta between segments. We
were using dc_fixpt_clamp_u0d10() to do that but it doesn't do what we
want it to do. It will preserve 10-bit precision after the decimal
point, but that's not quite what we want. We want 14-bit precision and
discard the 4 most-significant bytes.
To do that we'll do dc_fixpt_clamp_u0d14() & 0x3ff instead.
There's a number of drivers (e.g. dw_mmc, meson-gx, mmci, sunxi) using
the same mechanism and a private flag vqmmc_enabled to deal with
enabling/disabling the vqmmc regulator.
Move this to the core and create new helpers mmc_regulator_enable_vqmmc
and mmc_regulator_disable_vqmmc.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/71586432-360f-9b92-17f6-b05a8a971bc2@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stable-dep-of: 477865af60b2 ("mmc: sdhci-sprd: Fix vqmmc not shutting down after the card was pulled") Signed-off-by: Sasha Levin <sashal@kernel.org>
In the iommu probe_device path, domain_context_mapping() allows setting
up the context entry for a non-PCI device. However, in the iommu
release_device path, domain_context_clear() only clears context entries
for PCI devices.
Make domain_context_clear() behave consistently with
domain_context_mapping() by clearing context entries for both PCI and
non-PCI devices.
Fixes: 579305f75d34 ("iommu/vt-d: Update to use PCI DMA aliases") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20231114011036.70142-4-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
When IOMMU hardware operates in legacy mode, the TT field of the context
entry determines the translation type, with three supported types (Section
9.3 Context Entry):
- DMA translation without device TLB support
- DMA translation with device TLB support
- Passthrough mode with translated and translation requests blocked
Device TLB support is absent when hardware is configured in passthrough
mode.
Disable the PCI ATS feature when IOMMU is configured for passthrough
translation type in legacy (non-scalable) mode.
Fixes: 0faa19a1515f ("iommu/vt-d: Decouple PASID & PRI enabling from SVA") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20231114011036.70142-3-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
If domain attaching to device fails, the IOMMU driver should bring the
device to blocking DMA state. The upper layer is expected to recover it
by attaching a new domain. Use device_block_translation() in the error
path of dev_attach to make the behavior specific.
The difference between device_block_translation() and the previous
dmar_remove_one_dev_info() is that, in the scalable mode, it is the
RID2PASID entry instead of context entry being cleared. As a result,
enabling PCI capabilities is moved up.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20221118132451.114406-3-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stable-dep-of: da37dddcf4ca ("iommu/vt-d: Disable PCI ATS in legacy passthrough mode") Signed-off-by: Sasha Levin <sashal@kernel.org>
Whether or not a domain is attached to the device, the pasid table should
always be valid as long as it has been probed. This moves the pasid table
allocation from the domain attaching device path to device probe path and
frees it in the device release path.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20221118132451.114406-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stable-dep-of: da37dddcf4ca ("iommu/vt-d: Disable PCI ATS in legacy passthrough mode") Signed-off-by: Sasha Levin <sashal@kernel.org>
The latest VT-d spec indicates that when remapping hardware is disabled
(TES=0 in Global Status Register), upstream ATS Invalidation Completion
requests are treated as UR (Unsupported Request).
Consequently, the spec recommends in section 4.3 Handling of Device-TLB
Invalidations that software refrain from submitting any Device-TLB
invalidation requests when address remapping hardware is disabled.
Verify address remapping hardware is enabled prior to submitting Device-
TLB invalidation requests.
Fixes: 792fb43ce2c9 ("iommu/vt-d: Enable Intel IOMMU scalable mode by default") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20231114011036.70142-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
For a 900MHz i.MX6ULL CPU the 792MHz OPP is disabled. There is no
convincing reason to disable this OPP. If a CPU can run at 900MHz,
it should also be able to cope with 792MHz. Looking at the voltage
level of 792MHz in [1] (page 24, table 10. "Operating Ranges") the
current defined OPP is above the minimum. So the voltage level
shouldn't be a problem. However in [2] (page 24, table 10.
"Operating Ranges"), it is not mentioned that 792MHz OPP isn't
allowed. Change it to only disable 792MHz OPP for i.MX6ULL types
below 792 MHz.
It is confusing if a warning is given for disabling a non-existent
frequency of the operating performance points (OPP). In this case
the function dev_pm_opp_disable() returns -ENODEV. Check the return
value and avoid the output of a warning in this case. Avoid code
duplication by using a separate function.
A race condition exists where a synchronous (noqueue) transfer can be
active during a system suspend. This can cause a null pointer
dereference exception to occur when the system resumes.
Example order of events leading to the exception:
1. spi_sync() calls __spi_transfer_message_noqueue() which sets
ctlr->cur_msg
2. Spi transfer begins via spi_transfer_one_message()
3. System is suspended interrupting the transfer context
4. System is resumed
6. spi_controller_resume() calls spi_start_queue() which resets cur_msg
to NULL
7. Spi transfer context resumes and spi_finalize_current_message() is
called which dereferences cur_msg (which is now NULL)
Wait for synchronous transfers to complete before suspending by
acquiring the bus mutex and setting/checking a suspend flag.
The pointer to the next STI font is actually a signed 32-bit
offset. With this change the 64-bit kernel will correctly subract
the (signed 32-bit) offset instead of adding a (unsigned 32-bit)
offset. It has no effect on 32-bit kernels.
This fixes the stifb driver with a 64-bit kernel on qemu.
Commit ac91e6980563 ("PCI: Unify delay handling for reset and resume")
shortened an unconditional 1 sec delay after a Secondary Bus Reset to 100
msec for PCIe (per PCIe r6.1 sec 6.6.1). The 1 sec delay is only required
for Conventional PCI.
But it turns out that there are PCIe devices which require a longer delay
than prescribed before first config space access after reset recovery or
resume from D3cold:
Chad reports that a "VideoPropulsion Torrent QN16e" MPEG QAM Modulator
"raises a PCI system error (PERR), as reported by the IPMI event log, and
the hardware itself would suffer a catastrophic event, cycling the server"
unless the longer delay is observed.
The card is specified to conform to PCIe r1.0 and indeed only supports Gen1
speed (2.5 GT/s) according to lspci. PCIe r1.0 sec 7.6 prescribes the same
100 msec delay as PCIe r6.1 sec 6.6.1:
To allow components to perform internal initialization, system software
must wait for at least 100 ms from the end of a reset (cold/warm/hot)
before it is permitted to issue Configuration Requests
The behavior of the Torrent QN16e card thus appears to be a quirk. Treat
it as such and lengthen the reset delay for this specific device.
Fixes: ac91e6980563 ("PCI: Unify delay handling for reset and resume") Link: https://lore.kernel.org/r/47727e792c7f0282dc144e3ec8ce8eb6e713394e.1695304512.git.lukas@wunner.de Reported-by: Chad Schroeder <CSchroeder@sonifi.com> Closes: https://lore.kernel.org/linux-pci/DM6PR16MB2844903E34CAB910082DF019B1FAA@DM6PR16MB2844.namprd16.prod.outlook.com/ Tested-by: Chad Schroeder <CSchroeder@sonifi.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Sasha Levin <sashal@kernel.org>
When running android emulator (which is based on QEMU 2.12) on
certain Intel hosts with kernel version 6.3-rc1 or above, guest
will freeze after loading a snapshot. This is almost 100%
reproducible. By default, the android emulator will use snapshot
to speed up the next launching of the same android guest. So
this breaks the android emulator badly.
I tested QEMU 8.0.4 from Debian 12 with an Ubuntu 22.04 guest by
running command "loadvm" after "savevm". The same issue is
observed. At the same time, none of our AMD platforms is impacted.
More experiments show that loading the KVM module with
"enable_apicv=false" can workaround it.
The issue started to show up after commit 8e6ed96cdd50 ("KVM: x86:
fire timer when it is migrated and expired, and in oneshot mode").
However, as is pointed out by Sean Christopherson, it is introduced
by commit 967235d32032 ("KVM: vmx: clear pending interrupts on
KVM_SET_LAPIC"). commit 8e6ed96cdd50 ("KVM: x86: fire timer when
it is migrated and expired, and in oneshot mode") just makes it
easier to hit the issue.
Having both commits, the oneshot lapic timer gets fired immediately
inside the KVM_SET_LAPIC call when loading the snapshot. On Intel
platforms with APIC virtualization and posted interrupt processing,
this eventually leads to setting the corresponding PIR bit. However,
the whole PIR bits get cleared later in the same KVM_SET_LAPIC call
by apicv_post_state_restore. This leads to timer interrupt lost.
The fix is to move vmx_apicv_post_state_restore to the beginning of
the KVM_SET_LAPIC call and rename to vmx_apicv_pre_state_restore.
What vmx_apicv_post_state_restore does is actually clearing any
former apicv state and this behavior is more suitable to carry out
in the beginning.
Fixes: 967235d32032 ("KVM: vmx: clear pending interrupts on KVM_SET_LAPIC") Cc: stable@vger.kernel.org Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Haitao Shan <hshan@google.com> Link: https://lore.kernel.org/r/20230913000215.478387-1-hshan@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On RZ/G3S SMARC Carrier II board having RGMII connections b/w Ethernet
MACs and PHYs it has been discovered that doing unbind/bind for ravb
driver in a loop leads to wrong speed and duplex for Ethernet links and
broken connectivity (the connectivity cannot be restored even with
bringing interface down/up). Before doing unbind/bind the Ethernet
interfaces were configured though systemd. The sh instructions used to
do unbind/bind were:
$ cd /sys/bus/platform/drivers/ravb/
$ while :; do echo 11c30000.ethernet > unbind ; \
echo 11c30000.ethernet > bind; done
It has been discovered that there is a race b/w IOCTLs initialized by
systemd at the response of success binding and the
"ravb_write(ndev, CCC_OPC_RESET, CCC)" call in ravb_remove() as
follows:
1/ as a result of bind success the user space open/configures the
interfaces tough an IOCTL; the following stack trace has been
identified on RZ/G3S:
2/ this call may execute concurrently with ravb_remove() as the
unbind/bind operation was executed in a loop
3/ if the operation mode is changed to RESET (through
ravb_write(ndev, CCC_OPC_RESET, CCC) call in ravb_remove())
while the above ravb_open() is in progress it may lead to MAC
(or PHY, or MAC-PHY connection, the right point hasn't been identified
at the moment) to be broken, thus the Ethernet connectivity fails to
restore.
The simple fix for this is to move ravb_write(ndev, CCC_OPC_RESET, CCC))
after unregister_netdev() to avoid resetting the controller while the
netdev interface is still registered.
To avoid future issues in ravb_remove(), the patch follows the proper order
of operations in ravb_remove(): reverse order compared with ravb_probe().
This avoids described races as the IOCTLs as well as unregister_netdev()
(called now at the beginning of ravb_remove()) calls rtnl_lock() before
continuing and IOCTLs check (though devinet_ioctl()) if device is still
registered just after taking the lock:
int devinet_ioctl(struct net *net, unsigned int cmd, struct ifreq *ifr)
{
// ...
rtnl_lock();
ret = -ENODEV;
dev = __dev_get_by_name(net, ifr->ifr_name);
if (!dev)
goto done;
In case ravb_phy_start() returns with error the settings applied in
ravb_dmac_init() are not reverted (e.g. config mode). For this call
ravb_stop_dma() on failure path of ravb_open().
ravb_phy_start() may fail. If that happens, the TX queues will remain
started. Thus, move the netif_tx_start_all_queues() after PHY is
successfully initialized.
Hardware manual of RZ/G3S (and RZ/G2L) specifies the following on the
description of CXR35 register (chapter "PHY interface select register
(CXR35)"): "After release reset, make write-access to this register before
making write-access to other registers (except MDIOMOD). Even if not need
to change the value of this register, make write-access to this register
at least one time. Because RGMII/MII MODE is recognized by accessing this
register".
The setup procedure for EMAC module (chapter "Setup procedure" of RZ/G3S,
RZ/G2L manuals) specifies the E-MAC.CXR35 register is the first EMAC
register that is to be configured.
Note [A] from chapter "PHY interface select register (CXR35)" specifies
the following:
[A] The case which CXR35 SEL_XMII is used for the selection of RGMII/MII
in APB Clock 100 MHz.
(1) To use RGMII interface, Set ‘H’03E8_0000’ to this register.
(2) To use MII interface, Set ‘H’03E8_0002’ to this register.
pm_runtime_get_sync() may return an error. In case it returns with an error
dev->power.usage_count needs to be decremented. pm_runtime_resume_and_get()
takes care of this. Thus use it.
reset_control_deassert() could return an error. Some devices cannot work
if reset signal de-assert operation fails. To avoid this check the return
code of reset_control_deassert() in ravb_probe() and take proper action.
Along with it, the free_netdev() call from the error path was moved after
reset_control_assert() on its own label (out_free_netdev) to free
netdev in case reset_control_deassert() fails.
Fix races between ravb_tx_timeout_work() and functions of net_device_ops
and ethtool_ops by using rtnl_trylock() and rtnl_unlock(). Note that
since ravb_close() is under the rtnl lock and calls cancel_work_sync(),
ravb_tx_timeout_work() should calls rtnl_trylock(). Otherwise, a deadlock
may happen in ravb_tx_timeout_work() like below:
CPU0 CPU1
ravb_tx_timeout()
schedule_work()
...
__dev_close_many()
// Under rtnl lock
ravb_close()
cancel_work_sync()
// Waiting
ravb_tx_timeout_work()
rtnl_lock()
// This is possible to cause a deadlock
If rtnl_trylock() fails, rescheduling the work with sleep for 1 msec.
ndo_stop() is RTNL-protected by net core, and the worker function takes
RTNL as well. Therefore we will deadlock when trying to execute a
pending work synchronously. To fix this execute any pending work
asynchronously. This will do no harm because netif_running() is false
in ndo_stop(), and therefore the work function is effectively a no-op.
However we have to ensure that no task is running or pending after
rtl_remove_one(), therefore add a call to cancel_work_sync().
Fixes: abe5fc42f9ce ("r8169: use RTNL to protect critical sections") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/12395867-1d17-4cac-aa7d-c691938fcddf@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
TC ingress policer rules depends on interface receive queue
contexts since the bandwidth profiles are attached to RQ
contexts. When an interface is brought down all the queue
contexts are freed. This in turn frees bandwidth profiles in
hardware causing ingress police rules non-functional after
the interface is brought up. Fix this by applying all the ingress
police rules config to hardware in otx2_open. Also allow
adding ingress rules only when interface is running
since no contexts exist for the interface when it is down.
As of today, hardware does not support installing tc filter
rules based on priority. This patch adds support to install
the hardware rules based on priority. The final hardware rules
will not be dependent on rule installation order, it will be strictly
priority based, same as software.
Signed-off-by: Suman Ghosh <sumang@marvell.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230721043925.2627806-1-sumang@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: fd7f98b2e12a ("octeontx2-pf: Restore TC ingress police rules when interface is up") Signed-off-by: Sasha Levin <sashal@kernel.org>
When more than 64 VFs are enabled for a PF then mbox communication
between VF and PF is not working as mbox work queueing for few VFs
are skipped due to wrong calculation of VF numbers.
Commit aeb18dd07692 ("net: stmmac: xgmac: Disable MMC interrupts
by default") tries to disable MMC interrupts to avoid a storm of
unhandled interrupts, but leaves the FPE(Frame Preemption) MMC
interrupts enabled, FPE MMC interrupts can cause the same problem.
Now we mask FPE TX and RX interrupts to disable all MMC interrupts.
A loop in rvu_mbox_handler_nix_bandprof_free() contains
a break if (idx == MAX_BANDPROF_PER_PFFUNC),
but if idx may reach MAX_BANDPROF_PER_PFFUNC
buffer '(*req->prof_idx)[layer]' overflow happens before that check.
The patch moves the break to the
beginning of the loop.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e8e095b3b370 ("octeontx2-af: cn10k: Bandwidth profiles config support"). Signed-off-by: Elena Salomatkina <elena.salomatkina.cmc@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://lore.kernel.org/r/20231124210802.109763-1-elena.salomatkina.cmc@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Same init_rng() in both tests. The function reads /dev/urandom to
initialize srand(). In case of failure, it falls back onto the
entropy in the uninitialized variable. Not sure if this is on purpose.
But failure reading urandom should be rare, so just fail hard. While
at it, convert to getrandom(). Which man 4 random suggests is simpler
and more robust.
mptcp_inq.c:525:6:
mptcp_connect.c:1131:6:
error: variable 'foo' is used uninitialized
whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp") Fixes: b51880568f20 ("selftests: mptcp: add inq test case") Cc: Florian Westphal <fw@strlen.de> Signed-off-by: Willem de Bruijn <willemb@google.com>
----
When input is randomized because this is expected to meaningfully
explore edge cases, should we also add
1. logging the random seed to stdout and
2. adding a command line argument to replay from a specific seed
I can do this in net-next, if authors find it useful in this case. Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Link: https://lore.kernel.org/r/20231124171645.1011043-5-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Signedness of char is signed on x86_64, but unsigned on arm64.
Fix the warning building cmsg_sender.c on signed platforms or
forced with -fsigned-char:
msg_sender.c:455:12:
error: implicit conversion from 'int' to 'char'
changes value from 128 to -128
[-Werror,-Wconstant-conversion]
buf[0] = ICMPV6_ECHO_REQUEST;
nr_process must be a signed long: it is assigned a signed long by
strtol() and is compared against LONG_MIN and LONG_MAX.
ipsec.c:2280:65:
error: result of comparison of constant -9223372036854775808
with expression of type 'unsigned int' is always false
[-Werror,-Wtautological-constant-out-of-range-compare]
Recently the kernel test robot has reported an ARM-specific BUILD_BUG_ON()
in an old and unmaintained wil6210 wireless driver. The problem comes from
the structure packing rules of old ARM ABI ('-mabi=apcs-gnu'). For example,
the following structure is packed to 18 bytes instead of 16:
struct poorly_packed {
unsigned int a;
unsigned int b;
unsigned short c;
union {
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed));
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed)) inner;
};
} __attribute__((packed));
To fit it into 16 bytes, it's required to add packed attribute to the
container union as well:
struct poorly_packed {
unsigned int a;
unsigned int b;
unsigned short c;
union {
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed));
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed)) inner;
} __attribute__((packed));
} __attribute__((packed));
Thanks to Andrew Pinski of GCC team for sorting the things out at
https://gcc.gnu.org/pipermail/gcc/2023-November/242888.html.
Increase the needed headroom to account for a 64 byte alignment
restriction which, with this patch, we make mandatory on the Tx path.
The case in which the amount of headroom needed is not available is
already handled by the driver which instead sends a S/G frame with the
first buffer only holding the SW and HW annotation areas.
Without this patch, we can empirically see data corruption happening
between Tx and Tx confirmation which sometimes leads to the SW
annotation area being overwritten.
Since this is an old IP where the hardware team cannot help to
understand the underlying behavior, we make the Tx alignment mandatory
for all frames to avoid the crash on Tx conf. Also, remove the comment
that suggested that this is just an optimization.
This patch also sets the needed_headroom net device field to the usual
value that the driver would need on the Tx path:
- 64 bytes for the software annotation area
- 64 bytes to account for a 64 byte aligned buffer address
Fixes: 6e2387e8f19e ("staging: fsl-dpaa2/eth: Add Freescale DPAA2 Ethernet driver") Closes: https://lore.kernel.org/netdev/aa784d0c-85eb-4e5d-968b-c8f74fa86be6@gin.de/ Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The root causes are as follows:
Thread A Thread B
... netif_receive_skb
br_dev_stop ...
br_multicast_leave_snoopers ...
__ip_mc_dec_group ...
__igmp_group_dropped igmp_rcv
igmp_stop_timer igmp_heard_query //ref = 1
ip_ma_put igmp_mod_timer
refcount_dec_and_test igmp_start_timer //ref = 0
... refcount_inc //ref increases from 0
When the device receives an IGMPv2 Query message, it starts the timer
immediately, regardless of whether the device is running. If the device is
down and has left the multicast group, it will cause the mc list refcount
uaf issue.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The BOS descriptor defines a root descriptor and is the base descriptor for
accessing a family of related descriptors.
Function 'usb_get_bos_descriptor()' encounters an iteration issue when
skipping the 'USB_DT_DEVICE_CAPABILITY' descriptor type. This results in
the same descriptor being read repeatedly.
To address this issue, a 'goto' statement is introduced to ensure that the
pointer and the amount read is updated correctly. This ensures that the
function iterates to the next descriptor instead of reading the same
descriptor repeatedly.
It has been pointed out that the kernel log messages warning about
problems in USB configuration and related descriptors are vexing for
users. The warning log level has a fairly high priority, but the user
can do nothing to fix the underlying errors in the device's firmware.
To reduce the amount of useless information produced by tools that
filter high-priority log messages, we can change these warnings to
notices, i.e., change dev_warn() to dev_notice(). The same holds for
a few messages that currently use dev_err(): Unless they indicate a
failure that might make a device unusable (such as inability to
transfer a config descriptor), change them to dev_notice() also.
Commits 7b8ef22ea547 ("usb: xhci: plat: Add USB phy support") and 9134c1fd0503 ("usb: xhci: plat: Add USB 3.0 phy support") added support
for looking up legacy PHYs from the sysdev devicetree node and
initialising them.
This broke drivers such as dwc3 which manages PHYs themself as the PHYs
would now be initialised twice, something which specifically can lead to
resources being left enabled during suspend (e.g. with the
usb_phy_generic PHY driver).
As the dwc3 driver uses driver-name matching for the xhci platform
device, fix this by only looking up and initialising PHYs for devices
that have been matched using OF.
Note that checking that the platform device has a devicetree node would
currently be sufficient, but that could lead to subtle breakages in case
anyone ever tries to reuse an ancestor's node.
Fixes: 7b8ef22ea547 ("usb: xhci: plat: Add USB phy support") Fixes: 9134c1fd0503 ("usb: xhci: plat: Add USB 3.0 phy support") Cc: stable@vger.kernel.org # 4.1 Cc: Maxime Ripard <mripard@kernel.org> Cc: Stanley Chang <stanley_chang@realtek.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Tested-by: Stanley Chang <stanley_chang@realtek.com> Link: https://lore.kernel.org/r/20231103164323.14294-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
My prior race fix here broke CQM when ranges aren't used, as
the reporting worker now requires the cqm_config to be set in
the wdev, but isn't set when there's no range configured.
Rather than continuing to special-case the range version, set
the cqm_config always and configure accordingly, also tracking
if range was used or not to be able to clear the configuration
appropriately with the same API, which was actually not right
if both were implemented by a driver for some reason, as is
the case with mac80211 (though there the implementations are
equivalent so it doesn't matter.)
Also, the original multiple-RSSI commit lost checking for the
callback, so might have potentially crashed if a driver had
neither implementation, and userspace tried to use it despite
not being advertised as supported.
According to the IOControl register bits description in the page 31 of
the product datasheet, we know the bit 3 of IOControl register is
softreset, this bit will self-clearing once the reset finish.
In the probe, the softreset bit is set, and when we read this register
from debugfs/regmap interface, we found the softreset bit is still
setting, this confused us for a while. Finally we found this register
is cached, to read the real value from register, we could put it
into the regmap_volatile().
The DISPLAY_CLEAR command on the NewHaven NHD-0220DZW-AG5 display
does NOT change the DDRAM address to 00h (home position) like the
standard Hitachi HD44780 controller. As a consequence, the starting
position of the initial string LCD_INIT_TEXT is not guaranteed to be
at 0,0 depending on where the cursor was before the DISPLAY_CLEAR
command.
Extract of DISPLAY_CLEAR command from datasheets of:
Hitachi HD44780:
... It then sets DDRAM address 0 into the address counter...
NewHaven NHD-0220DZW-AG5 datasheet:
... This instruction does not change the DDRAM Address
Move the cursor home after sending DISPLAY_CLEAR command to support
non-standard LCDs.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: David Reaver <me@davidreaver.com> Link: https://lore.kernel.org/r/20230722180925.1408885-1-hugo@hugovil.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the send protocol versioning was added in 5.16 e77fbf990316
("btrfs: send: prepare for v2 protocol"), the 32/64bit compat code was
not updated (added by 2351f431f727 ("btrfs: fix send ioctl on 32bit with
64bit kernel")), missing the version struct member. The compat code is
probably rarely used, nobody reported any bugs.
Found by tool https://github.com/jirislaby/clang-struct .
Fixes: e77fbf990316 ("btrfs: send: prepare for v2 protocol") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When getting a chunk map, at btrfs_get_chunk_map(), we do some sanity
checks to verify we found a chunk map and that map found covers the
logical address the caller passed in. However the messages aren't very
clear in the sense that don't mention the issue is with a chunk map and
one of them prints the 'length' argument as if it were the end offset of
the requested range (while the in the string format we use %llu-%llu
which suggests a range, and the second %llu-%llu is actually a range for
the chunk map). So improve these two details in the error messages.
CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernel_write() requires the caller to ensure that the file is writable.
Let's do that directly after looking up the ->send_fd.
We don't need a separate bailout path because the "out" path already
does fput() if ->send_filp is non-NULL.
This has no security impact for two reasons:
- the ioctl requires CAP_SYS_ADMIN
- __kernel_write() bails out on read-only files - but only since 5.8,
see commit a01ac27be472 ("fs: check FMODE_WRITE in __kernel_write")
At btrfs_get_chunk_map() we get the extent map for the chunk that contains
the given logical address stored in the 'logical' argument. Then we do
sanity checks to verify the extent map contains the logical address. One
of these checks verifies if the extent map covers a range with an end
offset behind the target logical address - however this check has an
off-by-one error since it will consider an extent map whose start offset
plus its length matches the target logical address as inclusive, while
the fact is that the last byte it covers is behind the target logical
address (by 1).
So fix this condition by using '<=' rather than '<' when comparing the
extent map's "start + length" against the target logical address.
CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In btrfs_ref_tree_mod(), when !parent 're' was allocated through
kmalloc(). In the following code, if an error occurs, the execution will
be redirected to 'out' or 'out_unlock' and the function will be exited.
However, on some of the paths, 're' are not deallocated and may lead to
memory leaks.
For example: lookup_block_entry() for 'be' returns NULL, the out label
will be invoked. During that flow ref and 'ra' are freed but not 're',
which can potentially lead to a memory leak.
There is a feature request to add dmesg output when unmounting a btrfs.
There are several alternative methods to do the same thing, but with
their own problems:
- Use eBPF to watch btrfs_put_super()/open_ctree()
Not end user friendly, they have to dip their head into the source
code.
- Watch for directory /sys/fs/<uuid>/
This is way more simple, but still requires some simple device -> uuid
lookups. And a script needs to use inotify to watch /sys/fs/.
Compared to all these, directly outputting the information into dmesg
would be the most simple one, with both device and UUID included.
And since we're here, also add the output when mounting a filesystem for
the first time for parity. A more fine grained monitoring of subvolume
mounts should be done by another layer, like audit.
Now mounting a btrfs with all default mkfs options would look like this:
[81.906566] BTRFS info (device dm-8): first mount of filesystem 633b5c16-afe3-4b79-b195-138fe145e4f2
[81.907494] BTRFS info (device dm-8): using crc32c (crc32c-intel) checksum algorithm
[81.908258] BTRFS info (device dm-8): using free space tree
[81.912644] BTRFS info (device dm-8): auto enabling async discard
[81.913277] BTRFS info (device dm-8): checking UUID tree
[91.668256] BTRFS info (device dm-8): last unmount of filesystem 633b5c16-afe3-4b79-b195-138fe145e4f2
The jump_table stores two 32-bit words and one 32- (on 32-bit kernel)
or one 64-bit word (on 64-bit kernel).
Ensure that the last word is always 64-bit aligned on a 64-bit kernel
by aligning the whole structure on sizeof(long).
Those return codes are only defined for the parisc architecture and
are leftovers from when we wanted to be HP-UX compatible.
They are not returned by any Linux kernel syscall but do trigger
problems with the glibc strerrorname_np() and strerror() functions as
reported in glibc issue #31080.
There is no need to keep them, so simply remove them.
On parisc we need 16-byte alignment for variables which are used for
locking. Mark the __lock_aligned attribute acordingly so that the
.data..lock_aligned section will get that alignment in the generated
object files.
Make sure that the __bug_table section gets 32- or 64-bit aligned,
depending if a 32- or 64-bit kernel is being built.
Mark it non-writeable and use .blockz instead of the .org assembler
directive to pad the struct.
Add an align statement to tell the linker that all ex_table entries and as
such the whole ex_table section should be 32-bit aligned in vmlinux and modules.
Add an align statement to tell the linker that all ex_table entries and as
such the whole ex_table section should be 32-bit aligned in vmlinux and modules.
During floating point and vector save to thread data f0/vs0 are
clobbered by the FPSCR/VSCR store routine. This has been obvserved to
lead to userspace register corruption and application data corruption
with io-uring.
Fix it by restoring f0/vs0 after FPSCR/VSCR store has completed for
all the FP, altivec, VMX register save paths.
Tested under QEMU in kvm mode, running on a Talos II workstation with
dual POWER9 DD2.2 CPUs.
Additional detail (mpe):
Typically save_fpu() is called from __giveup_fpu() which saves the FP
regs and also *turns off FP* in the tasks MSR, meaning the kernel will
reload the FP regs from the thread struct before letting the task use FP
again. So in that case save_fpu() is free to clobber f0 because the FP
regs no longer hold live values for the task.
There is another case though, which is the path via:
sys_clone()
...
copy_process()
dup_task_struct()
arch_dup_task_struct()
flush_all_to_thread()
save_all()
That path saves the FP regs but leaves them live. That's meant as an
optimisation for a process that's using FP/VSX and then calls fork(),
leaving the regs live means the parent process doesn't have to take a
fault after the fork to get its FP regs back. The optimisation was added
in commit 8792468da5e1 ("powerpc: Add the ability to save FPU without
giving it up").
That path does clobber f0, but f0 is volatile across function calls,
and typically programs reach copy_process() from userspace via a syscall
wrapper function. So in normal usage f0 being clobbered across a
syscall doesn't cause visible data corruption.
But there is now a new path, because io-uring can call copy_process()
via create_io_thread() from the signal handling path. That's OK if the
signal is handled as part of syscall return, but it's not OK if the
signal is handled due to some other interrupt.
That path is:
interrupt_return_srr_user()
interrupt_exit_user_prepare()
interrupt_exit_user_prepare_main()
do_notify_resume()
get_signal()
task_work_run()
create_worker_cb()
create_io_worker()
copy_process()
dup_task_struct()
arch_dup_task_struct()
flush_all_to_thread()
save_all()
if (tsk->thread.regs->msr & MSR_FP)
save_fpu()
# f0 is clobbered and potentially live in userspace
Note the above discussion applies equally to save_altivec().
Fixes: 8792468da5e1 ("powerpc: Add the ability to save FPU without giving it up") Cc: stable@vger.kernel.org # v4.6+ Closes: https://lore.kernel.org/all/480932026.45576726.1699374859845.JavaMail.zimbra@raptorengineeringinc.com/ Closes: https://lore.kernel.org/linuxppc-dev/480221078.47953493.1700206777956.JavaMail.zimbra@raptorengineeringinc.com/ Tested-by: Timothy Pearson <tpearson@raptorengineering.com> Tested-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[mpe: Reword change log to describe exact path of corruption & other minor tweaks] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/1921539696.48534988.1700407082933.JavaMail.zimbra@raptorengineeringinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before running a guest, the host process (e.g., QEMU) FP/VEC registers
are saved if they were being used, similarly to when the kernel uses FP
registers. The guest values are then loaded into regs, and the host
process registers will be restored lazily when it uses FP/VEC.
KVM HV has a bug here: the host process registers do get saved, but the
user MSR bits remain enabled, which indicates the registers are valid
for the process. After they are clobbered by running the guest, this
valid indication causes the host process to take on the FP/VEC register
values of the guest.
Fixes: 34e119c96b2b ("KVM: PPC: Book3S HV P9: Reduce mtmsrd instructions required to save host SPRs") Cc: stable@vger.kernel.org # v5.17+ Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231122025811.2973-1-npiggin@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The VT-d spec requires (10.4.4 Global Command Register, TE field) that:
Hardware implementations supporting DMA draining must drain any in-flight
DMA read/write requests queued within the Root-Complex before switching
address translation on or off and reflecting the status of the command
through the TES field in the Global Status register.
Unfortunately, some integrated graphic devices fail to do so after some
kind of power state transition. As the result, the system might stuck in
iommu_disable_translation(), waiting for the completion of TE transition.
Add MTL to the quirk list for those devices and skips TE disabling if the
qurik hits.
Fixes: b1012ca8dc4f ("iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu") Cc: stable@vger.kernel.org Signed-off-by: Abdul Halim, Mohd Syazwan <mohd.syazwan.abdul.halim@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20231116022324.30120-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 028ddcac477b ("bcache: Remove unnecessary NULL point check in
node allocations") replaced IS_ERR_OR_NULL by IS_ERR. This leads to a
NULL pointer dereference.
for (i = 0; i < nodes; i++) {
if (__bch_keylist_realloc(&keylist, bkey_u64s(&r[i].b->key)))
goto out_nocoalesce;
// ...
out_nocoalesce:
// ...
for (i = 0; i < nodes; i++)
if (!IS_ERR(new_nodes[i])) { // IS_ERR_OR_NULL before 028ddcac477b
btree_node_free(new_nodes[i]); // new_nodes[0] is NULL
rw_unlock(true, new_nodes[i]);
}
This patch replaces IS_ERR() by IS_ERR_OR_NULL() to fix this.
Fixes: 028ddcac477b ("bcache: Remove unnecessary NULL point check in node allocations") Link: https://lore.kernel.org/all/3DF4A87A-2AC1-4893-AE5F-E921478419A9@suse.de/ Cc: stable@vger.kernel.org Cc: Zheng Wang <zyytlz.wz@163.com> Cc: Coly Li <colyli@suse.de> Signed-off-by: Markus Weippert <markus@gekmihesg.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's valid to add the same fence multiple times to a dma-resv object and
we shouldn't need one extra slot for each.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Fixes: a3f7c10a269d5 ("dma-buf/dma-resv: check if the new fence is really later") Cc: stable@vger.kernel.org # v5.19+ Link: https://patchwork.freedesktop.org/patch/msgid/20231115093035.1889-1-christian.koenig@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cpufreq_driver->fast_switch() callback expects a frequency as a return
value. amd_pstate_fast_switch() was returning the return value of
amd_pstate_update_freq(), which only indicates a success or failure.
Fix this by making amd_pstate_fast_switch() return the target_freq
when the call to amd_pstate_update_freq() is successful, and return
the current frequency from policy->cur when the call to
amd_pstate_update_freq() is unsuccessful.
Fixes: 4badf2eb1e98 ("cpufreq: amd-pstate: Add ->fast_switch() callback") Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Reviewed-by: Perry Yuan <perry.yuan@amd.com> Cc: 6.4+ <stable@vger.kernel.org> # v6.4+ Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When scanning namespaces, it is possible to get valid data from the first
call to nvme_identify_ns() in nvme_alloc_ns(), but not from the second
call in nvme_update_ns_info_block(). In particular, if the NSID becomes
inactive between the two commands, a storage device may return a buffer
filled with zero as per 4.1.5.1. In this case, we can get a kernel crash
due to a divide-by-zero in blk_stack_limits() because ns->lba_shift will
be set to zero.
We found an issue under Android OTA scenario that many BIOs have to do
FEC where the data under dm-verity is 100% complete and no corruption.
Android OTA has many dm-block layers, from upper to lower:
dm-verity
dm-snapshot
dm-origin & dm-cow
dm-linear
ufs
DM tables have to change 2 times during Android OTA merging process.
When doing table change, the dm-snapshot will be suspended for a while.
During this interval, many readahead IOs are submitted to dm_verity
from filesystem. Then the kverity works are busy doing FEC process
which cost too much time to finish dm-verity IO. This causes needless
delay which feels like system is hung.
After adding debugging it was found that each readahead IO needed
around 10s to finish when this situation occurred. This is due to IO
amplification:
dm-snapshot suspend
erofs_readahead // 300+ io is submitted
dm_submit_bio (dm_verity)
dm_submit_bio (dm_snapshot)
bio return EIO
bio got nothing, it's empty
verity_end_io
verity_verify_io
forloop range(0, io->n_blocks) // each io->nblocks ~= 20
verity_fec_decode
fec_decode_rsb
fec_read_bufs
forloop range(0, v->fec->rsn) // v->fec->rsn = 253
new_read
submit_bio (dm_snapshot)
end loop
end loop
dm-snapshot resume
Readahead BIOs get nothing while dm-snapshot is suspended, so all of
them will cause verity's FEC.
Each readahead BIO needs to verify ~20 (io->nblocks) blocks.
Each block needs to do FEC, and every block needs to do 253
(v->fec->rsn) reads.
So during the suspend interval(~200ms), 300 readahead BIOs trigger
~1518000 (300*20*253) IOs to dm-snapshot.
As readahead IO is not required by userspace, and to fix this issue,
it is best to pass readahead errors to upper layer to handle it.
Cc: stable@vger.kernel.org Fixes: a739ff3f543a ("dm verity: add support for forward error correction") Signed-off-by: Wu Bo <bo.wu@vivo.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If BIO error, verity_end_io() can call verity_finish_io() before
verity_fec_init_io(). Therefore, fec_io->rs is not initialized and
may crash when doing memory freeing in verity_fec_finish_io().
On recent versions of DMUB firmware, if we want to completely disable
ABM we have to pass ABM_LEVEL_IMMEDIATE_DISABLE as the requested ABM
level to DMUB. Otherwise, LCD eDP displays are unable to reach their
maximum brightness levels. So, to fix this whenever the user requests an
ABM level of 0 pass ABM_LEVEL_IMMEDIATE_DISABLE to DMUB instead. Also,
to keep the user's experience consistent map ABM_LEVEL_IMMEDIATE_DISABLE
to 0 when a user tries to read the requested ABM level.
Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Description]
When choosing which dummy p-state latency to use, we
need to use the DRAM speed from validation. The DRAMSpeed
DML variable can change because we use different input
params to DML when populating watermarks set B.
Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Setting register to force ordering to prevent read/write or write/read
hazards for un-cached modes.
Signed-off-by: Alex Sierra <alex.sierra@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When dGPU is put into BOCO it may be in D3cold but still able send
PME on display hotplug event. For this to work it must be enabled
as wake source from D3.
When runpm is enabled use pci_wake_from_d3() to mark wakeup as
enabled by default.
Cc: stable@vger.kernel.org # 6.1+ Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is not always possible to keep a device in the runtime suspended state
when a system level suspend/resume cycle is executed. E.g. for ATA devices
connected to AHCI adapters, system resume resets the ATA ports, which
causes connected devices to spin up. In such case, a runtime suspended disk
will incorrectly be seen with a suspended runtime state because the device
is not resumed by sd_resume_system(). The power state seen by the user is
different than the actual device physical power state.
Fix this issue by introducing the struct scsi_device flag
force_runtime_start_on_system_start. When set, this flag causes
sd_resume_system() to request a runtime resume operation for runtime
suspended devices. This results in the user seeing the device runtime_state
as active after a system resume, thus correctly reflecting the device
physical power state.
Fixes: 9131bff6a9f1 ("scsi: core: pm: Only runtime resume if necessary") Cc: <stable@vger.kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20231120225631.37938-3-dlemoal@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop
management") changed the single bit manage_start_stop flag into 2 boolean
fields of the SCSI device structure. Commit 24eca2dce0f8 ("scsi: sd:
Introduce manage_shutdown device flag") introduced the manage_shutdown
boolean field for the same structure. Together, these 2 commits increase
the size of struct scsi_device by 8 bytes by using booleans instead of
defining the manage_xxx fields as single bit flags, similarly to other
flags of this structure.
Avoid this unnecessary structure size increase and be consistent with the
definition of other flags by reverting the definitions of the manage_xxx
fields as single bit flags.
Fixes: 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management") Fixes: 24eca2dce0f8 ("scsi: sd: Introduce manage_shutdown device flag") Cc: <stable@vger.kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20231120225631.37938-2-dlemoal@kernel.org Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's been reported that the runtime PM on KONTRON SinglePC (PCI SSID
1734:1232) caused a stall of playback after a bunch of invocations.
(FWIW, this looks like an timing issue, and the stall happens rather
on the controller side.)
As a workaround, disable the default power-save on this platform.
STOP command does not guarantee to wait while busy, but subsequent command
MMC_CMDQ_TASK_MGMT to discard the queue will fail if the card is busy, so
be sure to wait by employing mmc_poll_for_busy().
Fixes: 72a5af554df8 ("mmc: core: Add support for handling CQE requests") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Christian Loehle <christian.loehle@arm.com> Link: https://lore.kernel.org/r/20231103084720.6886-4-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During CQE error recovery, error-free data commands get requeued if there
is any data left to transfer, but non-data commands are completed even
though they have not been processed. Requeue them instead.
Note the only non-data command is cache flush, which would have resulted in
a cache flush being lost if it was queued at the time of CQE recovery.
It is important that MMC_CMDQ_TASK_MGMT command to discard the queue is
successful because otherwise a subsequent reset might fail to flush the
cache first. Retry it and the previous STOP command.
Fixes: 72a5af554df8 ("mmc: core: Add support for handling CQE requests") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20231103084720.6886-5-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a task completion notification (TCN) is received when there is no
outstanding task, the cqhci driver issues a "spurious TCN" warning. This
was observed to happen right after CQE error recovery.
When an error interrupt is received the driver runs recovery logic.
It halts the controller, clears all pending tasks, and then re-enables
it. On some platforms, like Intel Jasper Lake, a stale task completion
event was observed, regardless of the CQHCI_CLEAR_ALL_TASKS bit being set.
This results in either:
a) Spurious TC completion event for an empty slot.
b) Corrupted data being passed up the stack, as a result of premature
completion for a newly added task.
Rather than add a quirk for affected controllers, ensure tasks are cleared
by toggling CQHCI_ENABLE, which would happen anyway if
cqhci_clear_all_tasks() timed out. This is simpler and should be safe and
effective for all controllers.
A correctly operating controller should successfully halt and clear tasks.
Failure may result in errors elsewhere, so promote messages from debug to
warnings.