This change causes regression when eDP and external display in mirror
mode. When external display supports low resolution than eDP, use eDP
timing to driver external display may cause corruption on external
display.
[Why]
Specific TBT4 dock doesn't send out short HPD to notify source
that IRQ event DOWN_REP_MSG_RDY is set. Which violates the spec
and cause source can't send out streams to mst sinks.
[How]
To cover this misbehavior, add an additional polling method to detect
DOWN_REP_MSG_RDY is set. HPD driven handling method is still kept.
Just hook up our handler to drm mgr->cbs->poll_hpd_irq().
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following errors & warnings reported by checkpatch:
ERROR: space required before the open brace '{'
ERROR: space required before the open parenthesis '('
ERROR: that open brace { should be on the previous line
ERROR: space prohibited before that ',' (ctx:WxW)
ERROR: else should follow close brace '}'
ERROR: open brace '{' following function definitions go on the next line
ERROR: code indent should use tabs where possible
WARNING: braces {} are not necessary for single statement blocks
WARNING: void function return statements are not generally useful
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
Commit fcaa174a9c99 ("scsi/sg: don't grab scsi host module reference") make
a mess how blk_get_queue() is called, blk_get_queue() returns true on
success while the caller expects it returns 0 on success.
Fix this problem and also add a corresponding error message on failure.
Fixes: fcaa174a9c99 ("scsi/sg: don't grab scsi host module reference") Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Closes: https://lore.kernel.org/all/87lefv622n.fsf@linux.ibm.com/ Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20230705024001.177585-1-yukuai1@huaweicloud.com Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to prevent request_queue to be freed before cleaning up
blktrace debugfs entries, commit db59133e9279 ("scsi: sg: fix blktrace
debugfs entries leakage") use scsi_device_get(), however,
scsi_device_get() will also grab scsi module reference and scsi module
can't be removed.
It's reported that blktests can't unload scsi_debug after block/001:
Fix this problem by grabbing request_queue reference directly, so that
scsi host module can still be unloaded while request_queue will be
pinged by sg device.
When the resource is the first in the bulk_move range, adding it again
(thus moving it to the tail) will corrupt the list since the first
pointer is not moved. This eventually lead to null pointer deref in
ttm_lru_bulk_move_del()
Fixes: fee2ede15542 ("drm/ttm: rework bulk move handling v5") Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20230622141902.28718-3-Yunxiang.Li@amd.com Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 6018b585e8c6 ("tracing/histograms: Add histograms to hist_vars if
they have referenced variables") added a check to fail histogram creation
if save_hist_vars() failed to add histogram to hist_vars list. But the
commit failed to set ret to failed return code before jumping to
unregister histogram, fix it.
Link: https://lore.kernel.org/linux-trace-kernel/20230714203341.51396-1-mkhalfella@purestorage.com Cc: stable@vger.kernel.org Fixes: 6018b585e8c6 ("tracing/histograms: Add histograms to hist_vars if they have referenced variables") Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`rustc` outputs by default the temporary files (i.e. the ones saved
by `-Csave-temps`, such as `*.rcgu*` files) in the current working
directory when `-o` and `--out-dir` are not given (even if
`--emit=x=path` is given, i.e. it does not use those for temporaries).
Since out-of-tree modules are compiled from the `linux` tree,
`rustc` then tries to create them there, which may not be accessible.
Thus pass `--out-dir` explicitly, even if it is just for the temporary
files.
Similarly, do so for Rust host programs too.
Reported-by: Raphael Nestler <raphael.nestler@gmail.com> Closes: https://github.com/Rust-for-Linux/linux/issues/1015 Reported-by: Andrea Righi <andrea.righi@canonical.com> Tested-by: Raphael Nestler <raphael.nestler@gmail.com> # non-hostprogs Tested-by: Andrea Righi <andrea.righi@canonical.com> # non-hostprogs Fixes: 295d8398c67e ("kbuild: specify output names separately for each emission type from rustc") Cc: stable@vger.kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Tested-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a long-standing metadata corruption issue that happens from
time to time, but it's very difficult to reproduce and analyse, benefit
from the JBD2_CYCLE_RECORD option, we found out that the problem is the
checkpointing process miss to write out some buffers which are raced by
another do_get_write_access(). Looks below for detail.
jbd2_log_do_checkpoint() //transaction X
//buffer A is dirty and not belones to any transaction
__buffer_relink_io() //move it to the IO list
__flush_batch()
write_dirty_buffer()
do_get_write_access()
clear_buffer_dirty
__jbd2_journal_file_buffer()
//add buffer A to a new transaction Y
lock_buffer(bh)
//doesn't write out
__jbd2_journal_remove_checkpoint()
//finish checkpoint except buffer A
//filesystem corrupt if the new transaction Y isn't fully write out.
Due to the t_checkpoint_list walking loop in jbd2_log_do_checkpoint()
have already handles waiting for buffers under IO and re-added new
transaction to complete commit, and it also removing cleaned buffers,
this makes sure the list will eventually get empty. So it's fine to
leave buffers on the t_checkpoint_list while flushing out and completely
stop using the t_checkpoint_io_list.
Cc: stable@vger.kernel.org Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Tested-by: Zhihao Cheng <chengzhihao1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230606135928.434610-2-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdio_bus_init() and phy_driver_register() both have error paths, and if
those are ever hit, ethtool will have a stale pointer to the
phy_ethtool_phy_ops stub structure, which references memory from a
module that failed to load (phylib).
It is probably hard to force an error in this code path even manually,
but the error teardown path of phy_init() should be the same as
phy_exit(), which is now simply not the case.
Fixes: 1536e2857bd3 ("tcp: Add a TCP_FASTOPEN socket option to get a max backlog on its listner") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230719212857.3943972-12-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
do_tcp_getsockopt() reads tp->tsoffset while another cpu
might change its value.
Fixes: 93be6ce0e91b ("tcp: set and get per-socket timestamp") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230719212857.3943972-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit c13380a55522 ("Bluetooth: btusb: Do not require hardcoded
interface numbers") inadvertedly broke bluetooth on Intel Macbook 2014.
The intention was to keep behavior intact when BTUSB_IFNUM_2 is set and
otherwise allow any interface numbers. The problem is that the new logic
condition omits the case where bInterfaceNumber is 0.
Fix BTUSB_IFNUM_2 handling by allowing both interface number 0 and 2
when the flag is set.
Fixes: c13380a55522 ("Bluetooth: btusb: Do not require hardcoded interface numbers") Reported-by: John Holland <johnbholland@icloud.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217651 Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no> Tested-by: John Holland<johnbholland@icloud.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Operations that check/update sk_state and access conn should hold
lock_sock, otherwise they can race.
The order of taking locks is hci_dev_lock > lock_sock > sco_conn_lock,
which is how it is in connect/disconnect_cfm -> sco_conn_del ->
sco_chan_del.
Fix locking in sco_connect to take lock_sock around updating sk_state
and conn.
sco_conn_del must not occur during sco_connect, as it frees the
sco_conn. Hold hdev->lock longer to prevent that.
sco_conn_add shall return sco_conn with valid hcon. Make it so also when
reusing an old SCO connection waiting for disconnect timeout (see
__sco_sock_close where conn->hcon is set to NULL).
This should not reintroduce the issue fixed in the earlier
commit 9a8ec9e8ebb5 ("Bluetooth: SCO: Fix possible circular locking
dependency on sco_connect_cfm"), the relevant fix of releasing lock_sock
in sco_sock_connect before acquiring hdev->lock is retained.
These changes mirror similar fixes earlier in ISO sockets.
Fixes: 9a8ec9e8ebb5 ("Bluetooth: SCO: Fix possible circular locking dependency on sco_connect_cfm") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
hci_connect_sco currently returns NULL when there is no link (i.e. when
hci_conn_link() returns NULL).
sco_connect() expects an ERR_PTR in case of any error (see line 266 in
sco.c). Thus, hcon set as NULL passes through to sco_conn_add(), which
tries to get hcon->hdev, resulting in dereferencing a NULL pointer as
reported by syzkaller.
The same issue exists for iso_connect_cis() calling hci_connect_cis().
Thus, make hci_connect_sco() and hci_connect_cis() return ERR_PTR
instead of NULL.
Reported-and-tested-by: syzbot+37acd5d80d00d609d233@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=37acd5d80d00d609d233 Fixes: 06149746e720 ("Bluetooth: hci_conn: Add support for linking multiple hcon") Signed-off-by: Siddh Raman Pant <code@siddh.me> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
KASAN reports that there's a use-after-free in
hci_remove_adv_monitor(). Trawling through the disassembly, you can
see that the complaint is from the access in bt_dev_dbg() under the
HCI_ADV_MONITOR_EXT_MSFT case. The problem case happens because
msft_remove_monitor() can end up freeing the monitor
structure. Specifically:
hci_remove_adv_monitor() ->
msft_remove_monitor() ->
msft_remove_monitor_sync() ->
msft_le_cancel_monitor_advertisement_cb() ->
hci_free_adv_monitor()
Let's fix the problem by just stashing the relevant data when it's
still valid.
Fixes: 7cf5c2978f23 ("Bluetooth: hci_sync: Refactor remove Adv Monitor") Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
sk->sk_state indicates whether iso_pi(sk)->conn is valid. Operations
that check/update sk_state and access conn should hold lock_sock,
otherwise they can race.
The order of taking locks is hci_dev_lock > lock_sock > iso_conn_lock,
which is how it is in connect/disconnect_cfm -> iso_conn_del ->
iso_chan_del.
Fix locking in iso_connect_cis/bis and sendmsg/recvmsg to take lock_sock
around updating sk_state and conn.
iso_conn_del must not occur during iso_connect_cis/bis, as it frees the
iso_conn. Hold hdev->lock longer to prevent that.
This should not reintroduce the issue fixed in commit 241f51931c35
("Bluetooth: ISO: Avoid circular locking dependency"), since the we
acquire locks in order. We retain the fix in iso_sock_connect to release
lock_sock before iso_connect_* acquires hdev->lock.
Similarly for commit 6a5ad251b7cd ("Bluetooth: ISO: Fix possible
circular locking dependency"). We retain the fix in iso_conn_ready to
not acquire iso_conn_lock before lock_sock.
iso_conn_add shall return iso_conn with valid hcon. Make it so also when
reusing an old CIS connection waiting for disconnect timeout (see
__iso_sock_close where conn->hcon is set to NULL).
In hci_cs_disconnect, we do hci_conn_del even if disconnection failed.
ISO, L2CAP and SCO connections refer to the hci_conn without
hci_conn_get, so disconn_cfm must be called so they can clean up their
conn, otherwise use-after-free occurs.
Fixes: b8d290525e39 ("Bluetooth: clean up connection in hci_cs_disconnect") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
hci_update_accept_list_sync iterates over hdev->pend_le_conns and
hdev->pend_le_reports, and waits for controller events in the loop body,
without holding hdev lock.
Meanwhile, these lists and the items may be modified e.g. by
le_scan_cleanup. This can invalidate the list cursor or any other item
in the list, resulting to invalid behavior (eg use-after-free).
Use RCU for the hci_conn_params action lists. Since the loop bodies in
hci_sync block and we cannot use RCU or hdev->lock for the whole loop,
copy list items first and then iterate on the copy. Only the flags field
is written from elsewhere, so READ_ONCE/WRITE_ONCE should guarantee we
read valid values.
Free params everywhere with hci_conn_params_free so the cleanup is
guaranteed to be done properly.
This fixes the following, which can be triggered e.g. by BlueZ new
mgmt-tester case "Add + Remove Device Nowait - Success", or by changing
hci_le_set_cig_params to always return false, and running iso-tester:
==================================================================
BUG: KASAN: slab-use-after-free in hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
Read of size 8 at addr ffff888001265018 by task kworker/u3:0/32
Fixes: e8907f76544f ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 3") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
end key should be equal to start unless NFT_SET_EXT_KEY_END is present.
Its possible to add elements that only have a start key
("{ 1.0.0.0 . 2.0.0.0 }") without an internval end.
Insertion treats this via:
if (nft_set_ext_exists(ext, NFT_SET_EXT_KEY_END))
end = (const u8 *)nft_set_ext_key_end(ext)->data;
else
end = start;
but removal side always uses nft_set_ext_key_end().
This is wrong and leads to garbage remaining in the set after removal
next lookup/insert attempt will give:
BUG: KASAN: slab-use-after-free in pipapo_get+0x8eb/0xb90
Read of size 1 at addr ffff888100d50586 by task nft-pipapo_uaf_/1399
Call Trace:
kasan_report+0x105/0x140
pipapo_get+0x8eb/0xb90
nft_pipapo_insert+0x1dc/0x1710
nf_tables_newsetelem+0x31f5/0x4e00
..
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Reported-by: lonial con <kongln9170@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
On some platforms there is a padding hole in the nft_verdict
structure, between the verdict code and the chain pointer.
On element insertion, if the new element clashes with an existing one and
NLM_F_EXCL flag isn't set, we want to ignore the -EEXIST error as long as
the data associated with duplicated element is the same as the existing
one. The data equality check uses memcmp.
For normal data (NFT_DATA_VALUE) this works fine, but for NFT_DATA_VERDICT
padding area leads to spurious failure even if the verdict data is the
same.
This then makes the insertion fail with 'already exists' error, even
though the new "key : data" matches an existing entry and userspace
told the kernel that it doesn't want to receive an error indication.
Fixes: c016c7e45ddf ("netfilter: nf_tables: honor NLM_F_EXCL flag in set element insertion") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Generic fixup for CS35L41 amplifies should not have vendor specific
chained fixup. For ThinkPad laptops with led issue, we can just add
specific fixup.
Fixes: a6ac60b36dade (ALSA: hda/realtek: Fix mute led issue on thinkpad with cs35l41 s-codec) Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230720082022.13033-1-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
This func misses checking for platform_get_irq()'s call and may passes the
negative error codes to request_irq(), which takes unsigned IRQ #,
causing it to fail with -EINVAL, overriding an original error code.
Fix this by stop calling request_irq() with invalid IRQ #s.
entries and bind debugfs files would display wrong data on NETSYS_V2 and
later because instead of using mtk_get_ib1_pkt_type the driver would use
MTK_FOE_IB1_PACKET_TYPE which corresponds to NETSYS_V1(.x) SoCs.
Use mtk_get_ib1_pkt_type so entries and bind records display correctly.
Commit 3f4ca5fafc08 ("tcp: avoid the lookup process failing to get sk in
ehash table") reversed the order in how a socket is inserted into ehash
to fix an issue that ehash-lookup could fail when reqsk/full sk/twsk are
swapped. However, it introduced another lookup failure.
The full socket in ehash is allocated from a slab with SLAB_TYPESAFE_BY_RCU
and does not have SOCK_RCU_FREE, so the socket could be reused even while
it is being referenced on another CPU doing RCU lookup.
Let's say a socket is reused and inserted into the same hash bucket during
lookup. After the blamed commit, a new socket is inserted at the end of
the list. If that happens, we will skip sockets placed after the previous
position of the reused socket, resulting in ehash lookup failure.
As described in Documentation/RCU/rculist_nulls.rst, we should insert a
new socket at the head of the list to avoid such an issue.
This issue, the swap-lookup-failure, and another variant reported in [0]
can all be handled properly by adding a locked ehash lookup suggested by
Eric Dumazet [1].
However, this issue could occur for every packet, thus more likely than
the other two races, so let's revert the change for now.
key might contain private part of the key, so better use
kfree_sensitive to free it.
Fixes: 38320c70d282 ("[IPSEC]: Use crypto_aead and authenc in ESP") Signed-off-by: Wang Ming <machel@vivo.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 32078 Comm: syz-executor.4 Not tainted 6.5.0-rc1-syzkaller-00033-geb26cbb1a754 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023
Fixes: 58d607d3e52f ("tcp: provide skb->hash to synack packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230717144445.653164-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When using IPv4/TCP, skb->hash comes from sk->sk_txhash except in
TIME_WAIT and SYN_RECV where it's not set in the reply skb from
ip_send_unicast_reply. Those packets will have a mismatched hash with
others from the same flow as their hashes will be 0. IPv6 does not have
the same issue as the hash is set from the socket txhash in those cases.
This commits sets the hash in the reply skb from ip_send_unicast_reply,
which makes the IPv4 code behaving like IPv6.
Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 5e5265522a9a ("tcp: annotate data-races around tcp_rsk(req)->txhash") Signed-off-by: Sasha Levin <sashal@kernel.org>
In normal operation, each populated queue item has
next_to_watch pointing to the last TX desc of the packet,
while each cleaned item has it set to 0. In particular,
next_to_use that points to the next (necessarily clean)
item to use has next_to_watch set to 0.
When the TX queue is used both by an application using
AF_XDP with ZEROCOPY as well as a second non-XDP application
generating high traffic, the queue pointers can get in
an invalid state where next_to_use points to an item
where next_to_watch is NOT set to 0.
However, the implementation assumes at several places
that this is never the case, so if it does hold,
bad things happen. In particular, within the loop inside
of igc_clean_tx_irq(), next_to_clean can overtake next_to_use.
Finally, this prevents any further transmission via
this queue and it never gets unblocked or signaled.
Secondly, if the queue is in this garbled state,
the inner loop of igc_clean_tx_ring() will never terminate,
completely hogging a CPU core.
The reason is that igc_xdp_xmit_zc() reads next_to_use
before acquiring the lock, and writing it back
(potentially unmodified) later. If it got modified
before locking, the outdated next_to_use is written
pointing to an item that was already used elsewhere
(and thus next_to_watch got written).
Fixes: 9acf59a752d4 ("igc: Enable TX via AF_XDP zero-copy") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230717175444.3217831-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
|NETDEV WATCHDOG: enp3s0 (igc): transmit queue 2 timed out
The reason is the Tx queue transmission start (txq->trans_start) is not updated
in XDP code path. Therefore, add it for all XDP transmission functions.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 78adb4bcf99e ("igc: Prevent garbled TX queue with XDP ZEROCOPY") Signed-off-by: Sasha Levin <sashal@kernel.org>
When running an freplace attached bpf program on an arm64 system w were
seeing the following issue:
Unhandled 64-bit el1h sync exception on CPU47, ESR 0x0000000036000003 -- BTI
After a bit of work to track it down I determined that what appeared to be
happening is that the 'bti c' at the start of the program was somehow being
reached after a 'br' instruction. Further digging pointed me toward the
fact that the function was attached via freplace. This in turn led me to
build_plt which I believe is invoking the long jump which is triggering
this error.
To resolve it we can replace the 'bti c' with 'bti jc' and add a comment
explaining why this has to be modified as such.
While the check_max_stack_depth function explores call chains emanating
from the main prog, which is typically enough to cover all possible call
chains, it doesn't explore those rooted at async callbacks unless the
async callback will have been directly called, since unlike non-async
callbacks it skips their instruction exploration as they don't
contribute to stack depth.
It could be the case that the async callback leads to a callchain which
exceeds the stack depth, but this is never reachable while only
exploring the entry point from main subprog. Hence, repeat the check for
the main subprog *and* all async callbacks marked by the symbolic
execution pass of the verifier, as execution of the program may begin at
any of them.
Consider functions with following stack depths:
main: 256
async: 256
foo: 256
main:
rX = async
bpf_timer_set_callback(...)
async:
foo()
Here, async is not descended as it does not contribute to stack depth of
main (since it is referenced using bpf_pseudo_func and not
bpf_pseudo_call). However, when async is invoked asynchronously, it will
end up breaching the MAX_BPF_STACK limit by calling foo.
Hence, in addition to main, we also need to explore call chains
beginning at all async callback subprogs in a program.
The assignment to idx in check_max_stack_depth happens once we see a
bpf_pseudo_call or bpf_pseudo_func. This is not an issue as the rest of
the code performs a few checks and then pushes the frame to the frame
stack, except the case of async callbacks. If the async callback case
causes the loop iteration to be skipped, the idx assignment will be
incorrect on the next iteration of the loop. The value stored in the
frame stack (as the subprogno of the current subprog) will be incorrect.
This leads to incorrect checks and incorrect tail_call_reachable
marking. Save the target subprog in a new variable and only assign to
idx once we are done with the is_async_cb check which may skip pushing
of frame to the frame stack and subsequent stack depth checks and tail
call markings.
Current driver enables backpressure for LBK interfaces.
But these interfaces do not support this feature.
Hence, this patch fixes the issue by skipping the
backpressure configuration for these interfaces.
Fixes: 75f36270990c ("octeontx2-pf: Support to enable/disable pause frames via ethtool"). Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Link: https://lore.kernel.org/r/20230716093741.28063-1-gakula@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Cited commit converted the neighbour code to use the standard RCU
variant instead of the RCU-bh variant, but the VRF code still uses
rcu_read_lock_bh() / rcu_read_unlock_bh() around the neighbour lookup
code in its IPv4 and IPv6 output paths, resulting in lockdep splats
[1][2]. Can be reproduced using [3].
Fix by switching to rcu_read_lock() / rcu_read_unlock().
ip link add name vrf-red up numtxqueues 2 type vrf table 10
ip link add name swp1 up master vrf-red type dummy
ip address add 192.0.2.1/24 dev swp1
ip address add 2001:db8:1::1/64 dev swp1
ip neigh add 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm dev swp1
ip neigh add 2001:db8:1::2 lladdr 00:11:22:33:44:55 nud perm dev swp1
ip vrf exec vrf-red ping 192.0.2.2 -c 1 &> /dev/null
ip vrf exec vrf-red ping6 2001:db8:1::2 -c 1 &> /dev/null
security/keys/trusted-keys/trusted_tpm2.c:203: warning: expecting prototype for tpm_buf_append_auth(). Prototype was for tpm2_buf_append_auth() instead.
The reset task is currently scheduled from the watchdog or adminq tasks.
First, all direct calls to schedule the reset task are replaced with the
iavf_schedule_reset(), which is modified to accept the flag showing the
type of reset.
To prevent the reset task from starting once iavf_remove() starts, we need
to check the __IAVF_IN_REMOVE_TASK bit before we schedule it. This is now
easily added to iavf_schedule_reset().
Finally, remove the check for IAVF_FLAG_RESET_NEEDED in the watchdog task.
It is redundant since all callers who set the flag immediately schedules
the reset task.
Fixes: 3ccd54ef44eb ("iavf: Fix init state closure on remove") Fixes: 14756b2ae265 ("iavf: Fix __IAVF_RESETTING state usage") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
A driver's lock (crit_lock) is used to serialize all the driver's tasks.
Lockdep, however, shows a circular dependency between rtnl and
crit_lock. This happens when an ndo that already holds the rtnl requests
the driver to reset, since the reset task (in some paths) tries to grab
rtnl to either change real number of queues of update netdev features.
[566.241851] ======================================================
[566.241893] WARNING: possible circular locking dependency detected
[566.241936] 6.2.14-100.fc36.x86_64+debug #1 Tainted: G OE
[566.241984] ------------------------------------------------------
[566.242025] repro.sh/2604 is trying to acquire lock:
[566.242061] ffff9280fc5ceee8 (&adapter->crit_lock){+.+.}-{3:3}, at: iavf_close+0x3c/0x240 [iavf]
[566.242167]
but task is already holding lock:
[566.242209] ffffffff9976d350 (rtnl_mutex){+.+.}-{3:3}, at: iavf_remove+0x6b5/0x730 [iavf]
[566.242300]
which lock already depends on the new lock.
The deadlock can be triggered by a script that is continuously resetting
the VF adapter while doing other operations requiring RTNL, e.g:
while :; do
ip link set $VF up
ethtool --set-channels $VF combined 2
ip link set $VF down
ip link set $VF up
ethtool --set-channels $VF combined 4
ip link set $VF down
done
Any operation that triggers a reset can substitute "ethtool --set-channles"
As a fix, add a new task "finish_config" that do all the work which
needs rtnl lock. With the exception of iavf_remove(), all work that
require rtnl should be called from this task.
As for iavf_remove(), at the point where we need to call
unregister_netdevice() (and grab rtnl_lock), we make sure the finish_config
task is not running (cancel_work_sync()) to safely grab rtnl. Subsequent
finish_config work cannot restart after that since the task is guarded
by the __IAVF_IN_REMOVE_TASK bit in iavf_schedule_finish_config().
Fixes: 5ac49f3c2702 ("iavf: use mutexes for locking of critical sections") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There was a fail when trying to add the interface to bonding
right after changing the MTU on the interface. It was caused
by bonding interface unable to open the interface due to
interface being in __RESETTING state because of MTU change.
Add new reset_waitqueue to indicate that reset has finished.
Add waiting for reset to finish in callbacks which trigger hw reset:
iavf_set_priv_flags(), iavf_change_mtu() and iavf_set_ringparam().
We use a 5000ms timeout period because on Hyper-V based systems,
this operation takes around 3000-4000ms. In normal circumstances,
it doesn't take more than 500ms to complete.
Add a function iavf_wait_for_reset() to reuse waiting for reset code and
use it also in iavf_set_channels(), which already waits for reset.
We don't use error handling in iavf_set_channels() as this could
cause the device to be in incorrect state if the reset was scheduled
but hit timeout or the waitng function was interrupted by a signal.
Fixes: 4e5e6b5d9d13 ("iavf: Fix return of set the new channel count") Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Co-developed-by: Dawid Wesierski <dawidx.wesierski@intel.com> Signed-off-by: Dawid Wesierski <dawidx.wesierski@intel.com> Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the system tries to close the netdev while iavf_reset_task() is
running, __LINK_STATE_START will be cleared and netif_running() will
return false in iavf_reinit_interrupt_scheme(). This will result in
iavf_free_traffic_irqs() not being called and a leak as follows:
[7632.489326] remove_proc_entry: removing non-empty directory 'irq/999', leaking at least 'iavf-enp24s0f0v0-TxRx-0'
[7632.490214] WARNING: CPU: 0 PID: 10 at fs/proc/generic.c:718 remove_proc_entry+0x19b/0x1b0
is shown when pci_disable_msix() is later called. Fix by using the
internal adapter state. The traffic IRQs will always exist if
state == __IAVF_RUNNING.
Fixes: 5b36e8d04b44 ("i40evf: Enable VF to request an alternate queue allocation") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If we set channels greater during iavf_remove(), and waiting reset done
would be timeout, then returned with error but changed num_active_queues
directly, that will lead to OOB like the following logs. Because the
num_active_queues is greater than tx/rx_rings[] allocated actually.
We do netif_napi_add() for all allocated q_vectors[], but potentially
do netif_napi_del() for part of them, then kfree q_vectors and leave
invalid pointers at dev->napi_list.
Although the patch #2 (of 2) can avoid the issue triggered by this
repro.sh, there still are other potential risks that if num_active_queues
is changed to less than allocated q_vectors[] by unexpected, the
mismatched netif_napi_add/del() can also cause UAF.
Since we actually call netif_napi_add() for all allocated q_vectors
unconditionally in iavf_alloc_q_vectors(), so we should fix it by
letting netif_napi_del() match to netif_napi_add().
Fixes: 5eae00c57f5e ("i40evf: main driver core") Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Cc: Donglin Peng <pengdonglin@sangfor.com.cn> Cc: Huang Cun <huangcun@sangfor.com.cn> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Arrays passed to reg_in_range_table should end with empty record.
The patch solves KASAN detected bug with signature:
BUG: KASAN: global-out-of-bounds in xehp_is_valid_b_counter_addr+0x2c7/0x350 [i915]
Read of size 4 at addr ffffffffa1555d90 by task perf/1518
CPU: 4 PID: 1518 Comm: perf Tainted: G U 6.4.0-kasan_438-g3303d06107f3+ #1
Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P DDR5 SODIMM SBS RVP, BIOS MTLPFWI1.R00.3223.D80.2305311348 05/31/2023
Call Trace:
<TASK>
...
xehp_is_valid_b_counter_addr+0x2c7/0x350 [i915]
Referenced commit missed that for chip versions 42 and 43 ASPM
remained disabled in the respective rtl_hw_start_...() routines.
This resulted in problems as described in the referenced bug
ticket. Therefore re-instantiate the previous logic.
Fixes: 5fc3f6c90cca ("r8169: consolidate disabling ASPM before EPHY access") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217635 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The KSZ8795 driver code was modified to use on KSZ8863/73, which has
different register definitions. Some of the new KSZ8795 register
information are wrong compared to previous code.
KSZ8795 also behaves differently in that the STATIC_MAC_TABLE_USE_FID
and STATIC_MAC_TABLE_FID bits are off by 1 when doing MAC table reading
than writing. To compensate that a special code was added to shift the
register value by 1 before applying those bits. This is wrong when the
code is running on KSZ8863, so this special code is only executed when
KSZ8795 is detected.
Fixes: 4b20a07e103f ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If cls_bpf_offload errors out, we must also undo tcf_bind_filter that
was done before the error.
Fix that by calling tcf_unbind_filter in errout_parms.
Fixes: eadb41489fd2 ("net: cls_bpf: add support for marking filters as hardware-only") Signed-off-by: Victor Nogueira <victor@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the case of an update, when TCA_U32_LINK is set, u32_set_parms will
decrement the refcount of the ht_down (struct tc_u_hnode) pointer
present in the older u32 filter which we are replacing. However, if
u32_replace_hw_knode errors out, the update command fails and that
ht_down pointer continues decremented. To fix that, when
u32_replace_hw_knode fails, check if ht_down's refcount was decremented
and undo the decrement.
Fixes: d34e3e181395 ("net: cls_u32: Add support for skip-sw flag to tc u32 classifier.") Signed-off-by: Victor Nogueira <victor@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When u32_replace_hw_knode fails, we need to undo the tcf_bind_filter
operation done at u32_set_parms.
Fixes: d34e3e181395 ("net: cls_u32: Add support for skip-sw flag to tc u32 classifier.") Signed-off-by: Victor Nogueira <victor@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In case an error occurred after mall_set_parms executed successfully, we
must undo the tcf_bind_filter call it issues.
Fix that by calling tcf_unbind_filter in err_replace_hw_filter label.
Fixes: ec2507d2a306 ("net/sched: cls_matchall: Fix error path") Signed-off-by: Victor Nogueira <victor@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When some of the da9063 regulators do not have corresponding DT nodes
a null pointer dereference occurs on boot because such regulators have
no init_data causing the pointers calculated in
da9063_check_xvp_constraints() to be invalid.
Do not dereference them in this case.
Fixes: b8717a80e6ee ("regulator: da9063: implement setter for voltage monitoring") Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Link: https://lore.kernel.org/r/20230616143736.2946173-1-martin.fuzzey@flowbird.group Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This doesn't check how many bytes the simple_write_to_buffer() writes to
the buffer. The only thing that we know is that the first byte is
initialized and the last byte of the buffer is set to NUL. However
the middle bytes could be uninitialized.
There is no need to use simple_write_to_buffer(). This code does not
support partial writes but instead passes "pos = 0" as the starting
offset regardless of what the user passed as "*ppos". Just use the
copy_from_user() function and initialize the whole buffer.
Fixes: 671e0b90051e ("ASoC: SOF: Clone the trace code to ipc3-dtrace as fw_tracing implementation") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/74148292-ce4d-4e01-a1a7-921e6767da14@moroto.mountain Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Calling ethtool during reload can lead to call trace, because VSI isn't
configured for some time, but netdev is alive.
To fix it add rtnl lock for VSI deconfig and config. Set ::num_q_vectors
to 0 after freeing and add a check for ::tx/rx_rings in ring related
ethtool ops.
Since commit 6624e780a577fc ("ice: split ice_vsi_setup into smaller
functions") ice_vsi_release does things twice. There is unregister
netdev which is unregistered in ice_deinit_eth also.
It also unregisters the devlink_port twice which is also unregistered
in ice_deinit_eth(). This double deregistration is hidden because
devl_port_unregister ignores the return value of xa_erase.
When the number of responses with status of STATUS_IO_TIMEOUT
exceeds a specified threshold (NUM_STATUS_IO_TIMEOUT), we reconnect
the connection. But we do not return the mid, or the credits
returned for the mid, or reduce the number of in-flight requests.
This bug could result in the server->in_flight count to go bad,
and also cause a leak in the mids.
This change moves the check to a few lines below where the
response is decrypted, even of the response is read from the
transform header. This way, the code for returning the mids
can be reused.
Also, the cifs_reconnect was reconnecting just the transport
connection before. In case of multi-channel, this may not be
what we want to do after several timeouts. Changed that to
reconnect the session and the tree too.
Also renamed NUM_STATUS_IO_TIMEOUT to a more appropriate name
MAX_STATUS_IO_TIMEOUT.
Fixes: 8e670f77c4a5 ("Handle STATUS_IO_TIMEOUT gracefully") Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ida_alloc_range() function returns negative error codes on error.
On success it returns values in the min to max range (inclusive). It
never returns more then INT_MAX even if "max" is higher. It never
returns values in the 0 to (min - 1) range.
The bug is that "min" is an unsigned int so negative error codes will
be promoted to high positive values errors treated as success.
Fixes: 1a14bf0fc7ed ("iommu/sva: Use GFP_KERNEL for pasid allocation") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/6b32095d-7491-4ebb-a850-12e96209eaaf@kili.mountain Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 1fd54773c267 ("udp: allow header check for dodgy GSO_UDP_L4
packets.") checks DODGY bit for UDP, but for packets that can be fed
directly to the device after gso_segs reset, it actually falls through
to fragmentation:
This change restores the expected behavior of GSO_UDP_L4 packets.
Fixes: 1fd54773c267 ("udp: allow header check for dodgy GSO_UDP_L4 packets.") Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by: Yan Zhai <yan@cloudflare.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Move the call to of_get_ethdev_address to mtk_add_mac which is part of
the probe function and can hence itself return -EPROBE_DEFER should
of_get_ethdev_address return -EPROBE_DEFER. This allows us to entirely
get rid of the mtk_init function.
The problem of of_get_ethdev_address returning -EPROBE_DEFER surfaced
in situations in which the NVMEM provider holding the MAC address has
not yet be loaded at the time mtk_eth_soc is initially probed. In this
case probing of mtk_eth_soc should be deferred instead of falling back
to use a random MAC address, so once the NVMEM provider becomes
available probing can be repeated.
Fixes: 656e705243fd ("net-next: mediatek: add support for MT7623 ethernet") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When we create an L2 loop on a bridge in netns, we will see packets storm
even if STP is enabled.
# unshare -n
# ip link add br0 type bridge
# ip link add veth0 type veth peer name veth1
# ip link set veth0 master br0 up
# ip link set veth1 master br0 up
# ip link set br0 type bridge stp_state 1
# ip link set br0 up
# sleep 30
# ip -s link show br0
2: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether b6:61:98:1c:1c:b5 brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast 95655376812861249 0 0 0 12861249 <-. Keep
TX: bytes packets errors dropped carrier collsns | increasing 1027834 11951 0 0 0 0 <-' rapidly
This is because llc_rcv() drops all packets in non-root netns and BPDU
is dropped.
Let's add extack warning when enabling STP in netns.
# unshare -n
# ip link add br0 type bridge
# ip link set br0 type bridge stp_state 1
Warning: bridge: STP does not work in non-root netns.
Note this commit will be reverted later when we namespacify the whole LLC
infra.
Fixes: e730c15519d0 ("[NET]: Make packet reception network namespace safe") Suggested-by: Harry Coin <hcoin@quietfountain.com> Link: https://lore.kernel.org/netdev/0f531295-e289-022d-5add-5ceffa0df9bc@quietfountain.com/ Suggested-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
CPSW ALE has 75 bit ALE entries which are stored within three 32 bit words.
The cpsw_ale_get_field() and cpsw_ale_set_field() functions assume that the
field will be strictly contained within one word. However, this is not
guaranteed to be the case and it is possible for ALE field entries to span
across up to two words at the most.
Fix the methods to handle getting/setting fields spanning up to two words.
Fixes: db82173f23c5 ("netdev: driver: ethernet: add cpsw address lookup engine support") Signed-off-by: Tanmay Patil <t-patil@ti.com>
[s-vadapalli@ti.com: rephrased commit message and added Fixes tag] Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
I get sporadic timeouts from the driver when using the
MV88E6352. Reading the status again after the loop fixes the
problem: the operation is successful but goes undetected.
Some added prints show things like this:
[ 58.356209] mv88e6085 mdio_mux-0.1:00: Timeout while waiting
for switch, addr 1b reg 0b, mask 8000, val 0000, data c000
[ 58.367487] mv88e6085 mdio_mux-0.1:00: Timeout waiting for
ATU op 4000, fid 0001
(...)
[ 61.826293] mv88e6085 mdio_mux-0.1:00: Timeout while waiting
for switch, addr 1c reg 18, mask 8000, val 0000, data 9860
[ 61.837560] mv88e6085 mdio_mux-0.1:00: Timeout waiting
for PHY command 1860 to complete
The reason is probably not the commands: I think those are
mostly fine with the 50+50ms timeout, but the problem
appears when OpenWrt brings up several interfaces in
parallel on a system with 7 populated ports: if one of
them take more than 50 ms and waits one or more of the
others can get stuck on the mutex for the switch and then
this can easily multiply.
As we sleep and wait, the function loop needs a final
check after exiting the loop if we were successful.
Suggested-by: Andrew Lunn <andrew@lunn.ch> Cc: Tobias Waldekranz <tobias@waldekranz.com> Fixes: 35da1dfd9484 ("net: dsa: mv88e6xxx: Improve performance of busy bit polling") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230712223405.861899-1-linus.walleij@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The HFGxTR_EL2 fields do not always follow the naming described
in the spec, nor do they match the name of the register they trap
in the rest of the kernel.
It is a bit sad that they were written by hand despite the availability
of a machine readable version...
Fixes: cc077e7facbe ("arm64/sysreg: Convert HFG[RW]TR_EL2 to automatic generation") Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.org> Cc: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230703130416.1495307-1-maz@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Use new cifs_smb_ses_inc_refcount() helper to get an active reference
of @ses and @ses->dfs_root_ses (if set). This will prevent
@ses->dfs_root_ses of being put in the next call to cifs_put_smb_ses()
and thus potentially causing an use-after-free bug.
Fixes: 8e3554150d6c ("cifs: fix sharing of DFS connections") Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 6eb4bd92c1ce ("kallsyms: strip LTO suffixes from static functions")
stripped all function/variable suffixes started with '.' regardless
of whether those suffixes are generated at LTO mode or not. In fact,
as far as I know, in LTO mode, when a static function/variable is
promoted to the global scope, '.llvm.<...>' suffix is added.
The existing mechanism breaks live patch for a LTO kernel even if
no <symbol>.llvm.<...> symbols are involved. For example, for the following
kernel symbols:
$ grep bpf_verifier_vlog /proc/kallsyms ffffffff81549f60 t bpf_verifier_vlog ffffffff8268b430 d bpf_verifier_vlog._entry ffffffff8282a958 d bpf_verifier_vlog._entry_ptr ffffffff82e12a1f d bpf_verifier_vlog.__already_done
'bpf_verifier_vlog' is a static function. '_entry', '_entry_ptr' and
'__already_done' are static variables used inside 'bpf_verifier_vlog',
so llvm promotes them to file-level static with prefix 'bpf_verifier_vlog.'.
Note that the func-level to file-level static function promotion also
happens without LTO.
Given a symbol name 'bpf_verifier_vlog', with LTO kernel, current mechanism will
return 4 symbols to live patch subsystem which current live patching
subsystem cannot handle it. With non-LTO kernel, only one symbol
is returned.
In [1], we have a lengthy discussion, the suggestion is to separate two
cases:
(1). new symbols with suffix which are generated regardless of whether
LTO is enabled or not, and
(2). new symbols with suffix generated only when LTO is enabled.
The cleanup_symbol_name() should only remove suffixes for case (2).
Case (1) should not be changed so it can work uniformly with or without LTO.
This patch removed LTO-only suffix '.llvm.<...>' so live patching and
tracing should work the same way for non-LTO kernel.
The cleanup_symbol_name() in scripts/kallsyms.c is also changed to have the same
filtering pattern so both kernel and kallsyms tool have the same
expectation on the order of symbols.
Fixes: 6eb4bd92c1ce ("kallsyms: strip LTO suffixes from static functions") Reported-by: Song Liu <song@kernel.org> Signed-off-by: Yonghong Song <yhs@fb.com> Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230628181926.4102448-1-yhs@fb.com Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When SPI loopback transfer is performed, S3C64XX_SPI_MODE_SELF_LOOPBACK
bit still remained. It works as loopback even if the next transfer is
not spi loopback mode.
If not SPI_LOOP, needs to clear S3C64XX_SPI_MODE_SELF_LOOPBACK bit.
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Fixes: ffb7bcd3b27e ("spi: s3c64xx: support loopback mode") Reviewed-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20230711082020.138165-1-jaewon02.kim@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The mirror_num_ret is allowed to be NULL, although it has to be set when
smap is set. Unfortunately that is not a well enough specifiable
invariant for static type checkers, so add a NULL check to make sure they
are fine.
Fixes: 03793cbbc80f ("btrfs: add fast path for single device io in __btrfs_map_block") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-L only specifies the search path for libraries directly provided in the
link line with -l. Because -lopencsd isn't specified, it's only linked
because it's a dependency of -lopencsd_c_api. Dependencies like this are
resolved using the default system search paths or -rpath-link=... rather
than -L. This means that compilation only works if OpenCSD is installed
to the system rather than provided with the CSLIBS (-L) option.
This could be fixed by adding -Wl,-rpath-link=$(CSLIBS) but that is less
conventional than just adding -lopencsd to the link line so that it uses
-L. -lopencsd seems to have been removed in commit ed17b1914978eddb
("perf tools: Drop requirement for libstdc++.so for libopencsd check")
because it was thought that there was a chance compilation would work
even if it didn't exist, but I think that only applies to libstdc++ so
there is no harm to add it back. libopencsd.so and libopencsd_c_api.so
would always exist together.
Testing
=======
The following scenarios now all work:
* Cross build with OpenCSD installed
* Cross build using CSLIBS=...
* Native build with OpenCSD installed
* Native build using CSLIBS=...
* Static cross build with OpenCSD installed
* Static cross build with CSLIBS=...
Committer testing:
⬢[acme@toolbox perf-tools]$ alias m
alias m='make -k BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools -C tools/perf install-bin && git status && perf test python ; perf record -o /dev/null sleep 0.01 ; perf stat --null sleep 0.01'
⬢[acme@toolbox perf-tools]$ ldd ~/bin/perf | grep csd
libopencsd_c_api.so.1 => /lib64/libopencsd_c_api.so.1 (0x00007fd49c44e000)
libopencsd.so.1 => /lib64/libopencsd.so.1 (0x00007fd49bd56000)
⬢[acme@toolbox perf-tools]$ cat /etc/redhat-release
Fedora release 36 (Thirty Six)
⬢[acme@toolbox perf-tools]$
Fixes: ed17b1914978eddb ("perf tools: Drop requirement for libstdc++.so for libopencsd check") Reported-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Signed-off-by: James Clark <james.clark@arm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Cc: coresight@lists.linaro.org Closes: https://lore.kernel.org/linux-arm-kernel/56905d7a-a91e-883a-b707-9d5f686ba5f1@arm.com/ Link: https://lore.kernel.org/all/36cc4dc6-bf4b-1093-1c0a-876e368af183@kleine-koenig.org/ Link: https://lore.kernel.org/r/20230707154546.456720-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Remove unnecessary release_mem_region from the error path to prevent
mem region from being released twice, which could avoid resource leak
or other unexpected issues.
If the prepend byte count field starts at bit 8, and the next defined
bit is SPI_CMD_ONE_BYTE at bit 11, it can be at most 3 bits wide, and
thus the max value is 7, not 15.
Fixes: b17de076062a ("spi/bcm63xx: work around inability to keep CS up") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Link: https://lore.kernel.org/r/20230629071453.62024-1-jonas.gorski@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, sd1 and sd0 have unique subnode names 'sd1_mux' and 'sd0_mux'.
If we change these to non-unique subnode names such as 'mux' this can
lead to the below conflict as the RZ/G2L pin control driver considers
only the names of the subnodes.
pinctrl-rzg2l 11030000.pinctrl: pin P47_0 already requested by 11c00000.mmc; cannot claim for 11c10000.mmc
pinctrl-rzg2l 11030000.pinctrl: pin-376 (11c10000.mmc) status -22
pinctrl-rzg2l 11030000.pinctrl: could not request pin 376 (P47_0) from group mux on device pinctrl-rzg2l
renesas_sdhi_internal_dmac 11c10000.mmc: Error applying setting, reverse things back
Fix this by constructing unique names from the node names of both the
pin control configuration node and its child node, where appropriate.
Based on the work done by Geert for the RZ/V2M pinctrl driver.
The eMMC and SDHI pin control configuration nodes in DT have subnodes
with the same names ("data" and "ctrl"). As the RZ/V2M pin control
driver considers only the names of the subnodes, this leads to
conflicts:
pinctrl-rzv2m b6250000.pinctrl: pin P8_2 already requested by 85000000.mmc; cannot claim for 85020000.mmc
pinctrl-rzv2m b6250000.pinctrl: pin-130 (85020000.mmc) status -22
renesas_sdhi_internal_dmac 85020000.mmc: Error applying setting, reverse things back
Fix this by constructing unique names from the node names of both the
pin control configuration node and its child node, where appropriate.
Destroying psi trigger in cgroup_file_release causes UAF issues when
a cgroup is removed from under a polling process. This is happening
because cgroup removal causes a call to cgroup_file_release while the
actual file is still alive. Destroying the trigger at this point would
also destroy its waitqueue head and if there is still a polling process
on that file accessing the waitqueue, it will step on the freed pointer:
do_select
vfs_poll
do_rmdir
cgroup_rmdir
kernfs_drain_open_files
cgroup_file_release
cgroup_pressure_release
psi_trigger_destroy
wake_up_pollfree(&t->event_wait)
// vfs_poll is unblocked
synchronize_rcu
kfree(t)
poll_freewait -> UAF access to the trigger's waitqueue head
Patch [1] fixed this issue for epoll() case using wake_up_pollfree(),
however the same issue exists for synchronous poll() case.
The root cause of this issue is that the lifecycles of the psi trigger's
waitqueue and of the file associated with the trigger are different. Fix
this by using kernfs_generic_poll function when polling on cgroup-specific
psi triggers. It internally uses kernfs_open_node->poll waitqueue head
with its lifecycle tied to the file's lifecycle. This also renders the
fix in [1] obsolete, so revert it.
[1] commit c2dbe32d5db5 ("sched/psi: Fix use-after-free in ep_remove_wait_queue()")
When checking whether a recently used CPU can be a potential idle
candidate, recent_used_cpu should be used to test p->cpus_ptr as
p->recent_used_cpu is not equal to recent_used_cpu and candidate
decision is made based on recent_used_cpu here.
Fixes: 89aafd67f28c ("sched/fair: Use prev instead of new target as recent_used_cpu") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Phil Auld <pauld@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Link: https://lore.kernel.org/r/20230620080747.359122-1-linmiaohe@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Extend commit 50f9a76ef127 ("iov_iter: Mark
copy_compat_iovec_from_user() noinline") to also cover
copy_iovec_from_user(). Different compiler versions cause the same
problem on different functions.
lib/iov_iter.o: warning: objtool: .altinstr_replacement+0x1f: redundant UACCESS disable
lib/iov_iter.o: warning: objtool: iovec_from_user+0x84: call to copy_iovec_from_user.part.0() with UACCESS enabled
lib/iov_iter.o: warning: objtool: __import_iovec+0x143: call to copy_iovec_from_user.part.0() with UACCESS enabled
Closing GPR port before graph close can result in un handled notifications
from DSP, this results in spam of errors from GPR driver as there is no
one to handle these notification at that point in time.
Fix this by closing GPR port after graph close is finished.
For invalid dai id, instead of returning -EINVAL
return bytes count as zero in acp_get_byte_count() function.
Fixes: 623621a9f9e1 ("ASoC: amd: Add common framework to support I2S on ACP SOC") Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230626105356.2580125-6-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
hclge_debugfs.c:90:25: warning: 'strncpy' output truncated before
terminating nul copying as many bytes from a string as its length
[-Wstringop-truncation]
strncpy(pos, result[i], strlen(result[i]));
strncpy() use src-length as copy-length, it may result in
dest-buf overflow.
So,this patch add some values check to avoid this issue.
Signed-off-by: Hao Chen <chenhao418@huawei.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/lkml/202207170606.7WtHs9yS-lkp@intel.com/T/ Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In a setup where a Thunderbolt hub connects to Ethernet and a display
through USB Type-C, users may experience a hung task timeout when they
remove the cable between the PC and the Thunderbolt hub.
This is because the igb_down function is called multiple times when
the Thunderbolt hub is unplugged. For example, the igb_io_error_detected
triggers the first call, and the igb_remove triggers the second call.
The second call to igb_down will block at napi_synchronize.
Here's the call trace:
__schedule+0x3b0/0xddb
? __mod_timer+0x164/0x5d3
schedule+0x44/0xa8
schedule_timeout+0xb2/0x2a4
? run_local_timers+0x4e/0x4e
msleep+0x31/0x38
igb_down+0x12c/0x22a [igb 6615058754948bfde0bf01429257eb59f13030d4]
__igb_close+0x6f/0x9c [igb 6615058754948bfde0bf01429257eb59f13030d4]
igb_close+0x23/0x2b [igb 6615058754948bfde0bf01429257eb59f13030d4]
__dev_close_many+0x95/0xec
dev_close_many+0x6e/0x103
unregister_netdevice_many+0x105/0x5b1
unregister_netdevice_queue+0xc2/0x10d
unregister_netdev+0x1c/0x23
igb_remove+0xa7/0x11c [igb 6615058754948bfde0bf01429257eb59f13030d4]
pci_device_remove+0x3f/0x9c
device_release_driver_internal+0xfe/0x1b4
pci_stop_bus_device+0x5b/0x7f
pci_stop_bus_device+0x30/0x7f
pci_stop_bus_device+0x30/0x7f
pci_stop_and_remove_bus_device+0x12/0x19
pciehp_unconfigure_device+0x76/0xe9
pciehp_disable_slot+0x6e/0x131
pciehp_handle_presence_or_link_change+0x7a/0x3f7
pciehp_ist+0xbe/0x194
irq_thread_fn+0x22/0x4d
? irq_thread+0x1fd/0x1fd
irq_thread+0x17b/0x1fd
? irq_forced_thread_fn+0x5f/0x5f
kthread+0x142/0x153
? __irq_get_irqchip_state+0x46/0x46
? kthread_associate_blkcg+0x71/0x71
ret_from_fork+0x1f/0x30
In this case, igb_io_error_detected detaches the network interface
and requests a PCIE slot reset, however, the PCIE reset callback is
not being invoked and thus the Ethernet connection breaks down.
As the PCIE error in this case is a non-fatal one, requesting a
slot reset can be avoided.
This patch fixes the task hung issue and preserves Ethernet
connection by ignoring non-fatal PCIE errors.
Signed-off-by: Ying Hsu <yinghsu@chromium.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230620174732.4145155-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Intel Killer AX1675i/s with device id 51f1 would show
"No config found for PCI dev 51f1/1672" in dmesg and refuse to work.
Add the new device id 51F1 for 1675i/s to fix the issue.
Roee reported various hard-to-debug crashes with pings in
EHT aggregation scenarios. Enabling KASAN showed that we
access the BAID allocation out of bounds, and looking at
the code a bit shows that since the reorder buffer entry
(struct iwl_mvm_reorder_buf_entry) is 128 bytes if debug
such as lockdep is enabled, then staring from an agg size
512 we overflow the size calculation, and allocate a much
smaller structure than we should, causing slab corruption
once we initialize this.