This reverts commits 86327e8eb94c ("memcg: drop kmem.limit_in_bytes") and
partially reverts 58056f77502f ("memcg, kmem: further deprecate
kmem.limit_in_bytes") which have incrementally removed support for the
kernel memory accounting hard limit. Unfortunately it has turned out that
there is still userspace depending on the existence of
memory.kmem.limit_in_bytes [1]. The underlying functionality is not
really required but the non-existent file just confuses the userspace
which fails in the result. The patch to fix this on the userspace side
has been submitted but it is hard to predict how it will propagate through
the maze of 3rd party consumers of the software.
Now, reverting alone 86327e8eb94c is not an option because there is
another set of userspace which cannot cope with ENOTSUPP returned when
writing to the file. Therefore we have to go and revisit 58056f77502f as
well. There are two ways to go ahead. Either we give up on the
deprecation and fully revert 58056f77502f as well or we can keep
kmem.limit_in_bytes but make the write a noop and warn about the fact.
This should work for both known breaking workloads which depend on the
existence but do not depend on the hard limit enforcement.
Note to backporters to stable trees. a8c49af3be5f ("memcg: add per-memcg
total kernel memory stat") introduced in 4.18 has added memcg_account_kmem
so the accounting is not done by obj_cgroup_charge_pages directly for v1
anymore. Prior kernels need to add it explicitly (thanks to Johannes for
pointing this out).
[akpm@linux-foundation.org: fix build - remove unused local] Link: http://lkml.kernel.org/r/20230920081101.GA12096@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net Link: https://lkml.kernel.org/r/ZRE5VJozPZt9bRPy@dhcp22.suse.cz Fixes: 86327e8eb94c ("memcg: drop kmem.limit_in_bytes") Fixes: 58056f77502f ("memcg, kmem: further deprecate kmem.limit_in_bytes") Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Tejun heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmem.limit_in_bytes (v1 way to limit kernel memory usage) has been
deprecated since 58056f77502f ("memcg, kmem: further deprecate
kmem.limit_in_bytes") merged in 5.16. We haven't heard about any serious
users since then but it seems that the mere presence of the file is
causing more harm thatn good. We (SUSE) have had several bug reports from
customers where Docker based containers started to fail because a write to
kmem.limit_in_bytes has failed.
This was unexpected because runc code only expects ENOENT (kmem disabled)
or EBUSY (tasks already running within cgroup). So a new error code was
unexpected and the whole container startup failed. This has been later
addressed by
https://github.com/opencontainers/runc/commit/52390d68040637dfc77f9fda6bbe70952423d380
so current Docker runtimes do not suffer from the problem anymore. There
are still older version of Docker in use and likely hard to get rid of
completely.
Address this by wiping out the file completely and effectively get back to
pre 4.5 era and CONFIG_MEMCG_KMEM=n configuration.
I would recommend backporting to stable trees which have picked up 58056f77502f ("memcg, kmem: further deprecate kmem.limit_in_bytes").
[mhocko@suse.com: restore _KMEM switch case] Link: https://lkml.kernel.org/r/ZKe5wxdbvPi5Cwd7@dhcp22.suse.cz Link: https://lkml.kernel.org/r/20230704115240.14672-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Muchun Song <muchun.song@linux.dev> Cc: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rbd_dev_refresh() has been holding header_rwsem across header and
parent info read-in unnecessarily for ages. With commit 870611e4877e
("rbd: get snapshot context after exclusive lock is ensured to be
held"), the potential for deadlocks became much more real owning to
a) header_rwsem now nesting inside lock_rwsem and b) rw_semaphores
not allowing new readers after a writer is registered.
For example, assuming that I/O request 1, I/O request 2 and header
read-in request all target the same OSD:
1. I/O request 1 comes in and gets submitted
2. watch error occurs
3. rbd_watch_errcb() takes lock_rwsem for write, clears owner_cid and
releases lock_rwsem
4. after reestablishing the watch, rbd_reregister_watch() calls
rbd_dev_refresh() which takes header_rwsem for write and submits
a header read-in request
5. I/O request 2 comes in: after taking lock_rwsem for read in
__rbd_img_handle_request(), it blocks trying to take header_rwsem
for read in rbd_img_object_requests()
6. another watch error occurs
7. rbd_watch_errcb() blocks trying to take lock_rwsem for write
8. I/O request 1 completion is received by the messenger but can't be
processed because lock_rwsem won't be granted anymore
9. header read-in request completion can't be received, let alone
processed, because the messenger is stranded
Change rbd_dev_refresh() to take header_rwsem only for actually
updating rbd_dev->header. Header and parent info read-in don't need
any locking.
Cc: stable@vger.kernel.org # 0b035401c570: rbd: move rbd_dev_refresh() definition Cc: stable@vger.kernel.org # 510a7330c82a: rbd: decouple header read-in from updating rbd_dev->header Cc: stable@vger.kernel.org # c10311776f0a: rbd: decouple parent info read-in from updating rbd_dev Cc: stable@vger.kernel.org Fixes: 870611e4877e ("rbd: get snapshot context after exclusive lock is ensured to be held") Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unlike header read-in, parent info read-in is already decoupled in
get_parent_info(), but it's buried in rbd_dev_v2_parent_info() along
with the processing logic.
Separate the initial read-in and update read-in logic into
rbd_dev_setup_parent() and rbd_dev_update_parent() respectively and
have rbd_dev_v2_parent_info() just populate struct parent_image_info
(i.e. what get_parent_info() did). Some existing QoI issues, like
flatten of a standalone clone being disregarded on refresh, remain.
Make rbd_dev_header_info() populate a passed struct rbd_image_header
instead of rbd_dev->header and introduce rbd_dev_update_header() for
updating mutable fields in rbd_dev->header upon refresh. The initial
read-in of both mutable and immutable fields in rbd_dev_image_probe()
passes in rbd_dev->header so no update step is required there.
rbd_init_layout() is now called directly from rbd_dev_image_probe()
instead of individually in format 1 and format 2 implementations.
Move rbd_dev_refresh() definition further down to avoid having to
move struct parent_image_info definition in the next commit. This
spares some forward declarations too.
On eDP we can receive invalid modes from dm_update_crtc_state() for
entirely new streams for which drm_mode_set_crtcinfo() shouldn't be
called on. So, instead of calling drm_mode_set_crtcinfo() from within
create_stream_for_sink() we can instead call it from
amdgpu_dm_connector_mode_valid(). Since, we are guaranteed to only call
drm_mode_set_crtcinfo() for valid modes from that function (invalid
modes are rejected by that callback) and that is the only user
of create_validate_stream_for_sink() that we need to call
drm_mode_set_crtcinfo() for (as before commit cb841d27b876
("drm/amd/display: Always pass connector_state to stream validation"),
that is the only place where create_validate_stream_for_sink()'s
dm_state was NULL).
Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2693 Fixes: cb841d27b876 ("drm/amd/display: Always pass connector_state to stream validation") Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Directly use tbo's start address will miss the domain start offset. Need
to use gpu_offset instead.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The elf-fdpic loader hard sets the process personality to either
PER_LINUX_FDPIC for true elf-fdpic binaries or to PER_LINUX for normal ELF
binaries (in this case they would be constant displacement compiled with
-pie for example). The problem with that is that it will lose any other
bits that may be in the ELF header personality (such as the "bug
emulation" bits).
On the ARM architecture the ADDR_LIMIT_32BIT flag is used to signify a
normal 32bit binary - as opposed to a legacy 26bit address binary. This
matters since start_thread() will set the ARM CPSR register as required
based on this flag. If the elf-fdpic loader loses this bit the process
will be mis-configured and crash out pretty quickly.
Modify elf-fdpic loader personality setting so that it preserves the upper
three bytes by using the SET_PERSONALITY macro to set it. This macro in
the generic case sets PER_LINUX and preserves the upper bytes.
Architectures can override this for their specific use case, and ARM does
exactly this.
The problem shows up quite easily running under qemu using the ARM
architecture, but not necessarily on all types of real ARM hardware. If
the underlying ARM processor does not support the legacy 26-bit addressing
mode then everything will work as expected.
Link: https://lkml.kernel.org/r/20230907011808.2985083-1-gerg@kernel.org Fixes: 1bde925d23547 ("fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries") Signed-off-by: Greg Ungerer <gerg@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Ungerer <gerg@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I had the following weird phenomena on a mobile phone: while
the capacity in /sys/class/power_supply/ab8500_fg/capacity
would reflect the actual charge and capacity of the battery,
only 1/3 of the value was shown on the battery status
indicator and warnings for low battery appeared.
It turns out that UPower, the Freedesktop power daemon,
will average all the power supplies of type "battery" in
/sys/class/power_supply/* if there is more than one battery.
For the AB8500, there was "battery" ab8500_fg, ab8500_btemp
and ab8500_chargalg. The latter two don't know anything
about the battery, and should not be considered. They were
however averaged and with the capacity of 0.
Flag ab8500_btemp and ab8500_chargalg with type "unknown"
so they are not averaged as batteries.
Remove the technology prop from ab8500_btemp as well, all
it does is snoop in on knowledge from another supply.
After this the battery indicator shows the right value.
Cc: Stefan Hansson <newbyte@disroot.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Similar to the rk817 codec alias that was missing, the rk817 charger
driver is missing a module alias as well. This absence prevents the
driver from autoprobing on OF systems when it is built as a module.
Add the right MODULE_ALIAS to fix this.
Fixes: 11cb8da0189b ("power: supply: Add charger driver for Rockchip RK817") Cc: stable@vger.kernel.org Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Reviewed-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20230612143651.959646-2-frattaroli.nicolas@gmail.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is an assertion in ggtt_reserve_guc_top that the global GTT
is of size at least GUC_GGTT_TOP, which is not the case on a 32-bit
platform; see commit 562d55d991b39ce376c492df2f7890fd6a541ffc
("drm/i915/bdw: Only use 2g GGTT for 32b platforms"). If GEM_BUG_ON
is enabled, this triggers a BUG(); if GEM_BUG_ON is disabled, the
subsequent reservation fails and the driver fails to initialise
the device:
i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Failed to reserve top of GGTT for GuC
i915 0000:00:02.0: Device initialization failed (-28)
i915 0000:00:02.0: Please file a bug on drm/i915; see https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs for details.
i915: probe of 0000:00:02.0 failed with error -28
Make the reservation at the top of the available space, whatever
that is, instead of assuming that the top will be GUC_GGTT_TOP.
Fixes: 911800765ef6 ("drm/i915/uc: Reserve upper range of GGTT") Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9080 Signed-off-by: Javier Pello <devel@otheo.eu> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Fernando Pacheco <fernando.pacheco@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: stable@vger.kernel.org # v5.3+ Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230902171039.2229126186d697dbcf62d6d8@otheo.eu
(cherry picked from commit 0f3fa942d91165c2702577e9274d2ee1c7212afc) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The folio conversion changed the behaviour of shmem_sg_alloc_table() to
put the entire length of the last folio into the sg list, even if the sg
list should have been shorter. gen8_ggtt_insert_entries() relied on the
list being the right length and would overrun the end of the page tables.
Other functions may also have been affected.
Clamp the length of the last entry in the sg list to be the expected
length.
On certain SATA controllers, softreset fails after wakeup from S2RAM with
the message "softreset failed (1st FIS failed)", sometimes resulting in
drives not being detected again. With the increased timeout, this issue
is avoided. Instead, "softreset failed (device not ready)" is now
logged 1-2 times; this later failure seems to cause fewer problems
however, and the drives are detected reliably once they've spun up and
the probe is retried.
The issue was observed with the primary SATA controller of the QNAP
TS-453B, which is an "Intel Corporation Celeron/Pentium Silver Processor
SATA Controller [8086:31e3] (rev 06)" integrated in the Celeron J4125 CPU,
and the following drives:
The SATA controller seems to be more relevant to this issue than the
drives, as the same drives are always detected reliably on the secondary
SATA controller on the same board (an ASMedia 106x) without any "softreset
failed" errors even without the increased timeout.
Fixes: e7d3ef13d52a ("libata: change drive ready wait after hard reset to 5s") Cc: stable@vger.kernel.org Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
libsas does its own domain based power management of ports. For such
ports, libata should not use a device type defining power management
operations as executing these operations for suspend/resume in addition
to libsas calls to ata_sas_port_suspend() and ata_sas_port_resume() is
not necessary (and likely dangerous to do, even though problems are not
seen currently).
Introduce the new ata_port_sas_type device_type for ports managed by
libsas. This new device type is used in ata_tport_add() and is defined
without power management operations.
Fixes: 2fcbdcb4c802 ("[SCSI] libata: export ata_port suspend/resume infrastructure for sas") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Whenever an ATA adapter driver is removed (e.g. rmmod),
ata_port_detach() is called repeatedly for all the adapter ports to
remove (unload) the devices attached to the port and delete the port
device itself. Removing of devices is done using libata EH with the
ATA_PFLAG_UNLOADING port flag set. This causes libata EH to execute
ata_eh_unload() which disables all devices attached to the port.
ata_port_detach() finishes by calling scsi_remove_host() to remove the
scsi host associated with the port. This function will trigger the
removal of all scsi devices attached to the host and in the case of
disks, calls to sd_shutdown() which will flush the device write cache
and stop the device. However, given that the devices were already
disabled by ata_eh_unload(), the synchronize write cache command and
start stop unit commands fail. E.g. running "rmmod ahci" with first
removing sd_mod results in error messages like:
The function ata_port_request_pm() checks the port flag
ATA_PFLAG_PM_PENDING and calls ata_port_wait_eh() if this flag is set to
ensure that power management operations for a port are not scheduled
simultaneously. However, this flag check is done without holding the
port lock.
Fix this by taking the port lock on entry to the function and checking
the flag under this lock. The lock is released and re-taken if
ata_port_wait_eh() needs to be called. The two WARN_ON() macros checking
that the ATA_PFLAG_PM_PENDING flag was cleared are removed as the first
call is racy and the second one done without holding the port lock.
Fixes: 5ef41082912b ("ata: add ata port system PM callbacks") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All architectures should use a long aligned address passed to set_bit().
User processes can pass either a 32-bit or 64-bit sized value to be
updated when tracing is enabled when on a 64-bit kernel. Both cases are
ensured to be naturally aligned, however, that is not enough. The
address must be long aligned without affecting checks on the value
within the user process which require different adjustments for the bit
for little and big endian CPUs.
Add a compat flag to user_event_enabler that indicates when a 32-bit
value is being used on a 64-bit kernel. Long align addresses and correct
the bit to be used by set_bit() to account for this alignment. Ensure
compat flags are copied during forks and used during deletion clears.
After commit 2e38a2a981b2 ("thermal/core: Add a generic thermal_zone_set_trip()
function") updating a trip point temperature doesn't actually work,
because the value supplied by user space is subsequently overwritten
with the current trip point hysteresis value.
Fix this by changing the code to parse the number string supplied by
user space after retrieving the current trip point data from the
thermal zone.
Also drop a redundant tab character from the code in question.
Fixes: 2e38a2a981b2 ("thermal/core: Add a generic thermal_zone_set_trip() function") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 6.3+ <stable@vger.kernel.org> # 6.3+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex reported that running ssh over IPv6 does not work with
Thunderbolt/USB4 networking driver. The reason for that is that driver
should call skb_is_gso() before calling skb_is_gso_v6(), and it should
not return false after calculates the checksum successfully. This probably
was a copy paste error from the original driver where it was done properly.
Reported-by: Alex Balcanquall <alex@alexbal.com> Fixes: e69b6c02b4c3 ("net: Add support for networking over Thunderbolt cable") Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marcus and Satya reported an issue where BTF_ID macro generates same
symbol in separate objects and that breaks final vmlinux link.
ld.lld: error: ld-temp.o <inline asm>:14577:1: symbol
'__BTF_ID__struct__cgroup__624' is already defined
This can be triggered under specific configs when __COUNTER__ happens to
be the same for the same symbol in two different translation units,
which is already quite unlikely to happen.
Add __LINE__ number suffix to make BTF_ID symbol more unique, which is
not a complete fix, but it would help for now and meanwhile we can work
on better solution as suggested by Andrii.
Marcus and Satya reported an issue where BTF_ID macro generates same
symbol in separate objects and that breaks final vmlinux link.
ld.lld: error: ld-temp.o <inline asm>:14577:1: symbol
'__BTF_ID__struct__cgroup__624' is already defined
This can be triggered under specific configs when __COUNTER__ happens to
be the same for the same symbol in two different translation units,
which is already quite unlikely to happen.
Add __LINE__ number suffix to make BTF_ID symbol more unique, which is
not a complete fix, but it would help for now and meanwhile we can work
on better solution as suggested by Andrii.
Currently the multi_kprobe link attach does not check error
injection list for programs with bpf_override_return helper
and allows them to attach anywhere. Adding the missing check.
Fixes: 0dcac2725406 ("bpf: Add multi kprobe link") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/bpf/20230907200652.926951-1-jolsa@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A user reported some issues with smaller file systems that get very
full. While investigating this issue I noticed that df wasn't showing
100% full, despite having 0 chunk space and having < 1MiB of available
metadata space.
This turns out to be an overflow issue, we're doing:
to determine if there's not enough space to make metadata allocations,
which overflows if total_available_metadata_space is < 4M. Fix this by
checking to see if our available space is greater than the 4M threshold.
This makes df properly report 100% usage on the file system.
CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When opening a directory (opendir(3)) or rewinding it (rewinddir(3)), we
are not holding the directory's inode locked, and this can result in later
attempting to add two entries to the directory with the same index number,
resulting in a transaction abort, with -EEXIST (-17), when inserting the
second delayed dir index. This results in a trace like the following:
The race leading to the problem happens like this:
1) Directory inode X is loaded into memory, its ->index_cnt field is
initialized to (u64)-1 (at btrfs_alloc_inode());
2) Task A is adding a new file to directory X, holding its vfs inode lock,
and calls btrfs_set_inode_index() to get an index number for the entry.
Because the inode's index_cnt field is set to (u64)-1 it calls
btrfs_inode_delayed_dir_index_count() which fails because no dir index
entries were added yet to the delayed inode and then it calls
btrfs_set_inode_index_count(). This functions finds the last dir index
key and then sets index_cnt to that index value + 1. It found that the
last index key has an offset of 100. However before it assigns a value
of 101 to index_cnt...
3) Task B calls opendir(3), ending up at btrfs_opendir(), where the VFS
lock for inode X is not taken, so it calls btrfs_get_dir_last_index()
and sees index_cnt still with a value of (u64)-1. Because of that it
calls btrfs_inode_delayed_dir_index_count() which fails since no dir
index entries were added to the delayed inode yet, and then it also
calls btrfs_set_inode_index_count(). This also finds that the last
index key has an offset of 100, and before it assigns the value 101
to the index_cnt field of inode X...
4) Task A assigns a value of 101 to index_cnt. And then the code flow
goes to btrfs_set_inode_index() where it increments index_cnt from
101 to 102. Task A then creates a delayed dir index entry with a
sequence number of 101 and adds it to the delayed inode;
5) Task B assigns 101 to the index_cnt field of inode X;
6) At some later point when someone tries to add a new entry to the
directory, btrfs_set_inode_index() will return 101 again and shortly
after an attempt to add another delayed dir index key with index
number 101 will fail with -EEXIST resulting in a transaction abort.
Fix this by locking the inode at btrfs_get_dir_last_index(), which is only
only used when opening a directory or attempting to lseek on it.
When opening a directory for reading it, we set the last index where we
stop iteration to the value in struct btrfs_inode::index_cnt. That value
does not match the index of the most recently added directory entry but
it's instead the index number that will be assigned the next directory
entry.
This means that if after the call to opendir(3) new directory entries are
added, a readdir(3) call will return the first new directory entry. This
is fine because POSIX says the following [1]:
"If a file is removed from or added to the directory after the most
recent call to opendir() or rewinddir(), whether a subsequent call to
readdir() returns an entry for that file is unspecified."
For example for the test script from commit 9b378f6ad48c ("btrfs: fix
infinite directory reads"), where we have 2000 files in a directory, ext4
doesn't return any new directory entry after opendir(3), while xfs returns
the first 13 new directory entries added after the opendir(3) call.
If we move to a shorter example with an empty directory when opendir(3) is
called, and 2 files added to the directory after the opendir(3) call, then
readdir(3) on btrfs will return the first file, ext4 and xfs return the 2
files (but in a different order). A test program for this, reported by
Ian Johnson, is the following:
To make this less odd, change the behaviour to never return new entries
that were added after the opendir(3) call. This is done by setting the
last_index field of the struct btrfs_file_private attached to the
directory's file handle with a value matching btrfs_inode::index_cnt
minus 1, since that value always matches the index of the next new
directory entry and not the index of the most recently added entry.
This was noticed by Miklos that file_remove_privs might call into
notify_change(), which requires to hold an exclusive lock. The problem
exists in FUSE and btrfs. We can fix it without any additional helpers
from VFS, in case the privileges would need to be dropped, change the
lock type to be exclusive and redo the loop.
Fixes: e9adabb9712e ("btrfs: use shared lock for direct writes within EOF") CC: Miklos Szeredi <miklos@szeredi.hu> CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When opening a directory we find what's the index of its last entry and
then store it in the directory's file handle private data (struct
btrfs_file_private::last_index), so that in the case new directory entries
are added to a directory after an opendir(3) call we don't end up in an
infinite loop (see commit 9b378f6ad48c ("btrfs: fix infinite directory
reads")) when calling readdir(3).
However once rewinddir(3) is called, POSIX states [1] that any new
directory entries added after the previous opendir(3) call, must be
returned by subsequent calls to readdir(3):
"The rewinddir() function shall reset the position of the directory
stream to which dirp refers to the beginning of the directory.
It shall also cause the directory stream to refer to the current
state of the corresponding directory, as a call to opendir() would
have done."
We currently don't refresh the last_index field of the struct
btrfs_file_private associated to the directory, so after a rewinddir(3)
we are not returning any new entries added after the opendir(3) call.
Fix this by finding the current last index of the directory when llseek
is called against the directory.
This can be reproduced by the following C program provided by Ian Johnson:
It was discovered that the ring buffer polling was incorrectly stating
that read would not block, but that's because polling did not take into
account that reads will block if the "buffer-percent" was set. Instead,
the ring buffer polling would say reads would not block if there was any
data in the ring buffer. This was incorrect behavior from a user space
point of view. This was fixed by commit 42fb0a1e84ff by having the polling
code check if the ring buffer had more data than what the user specified
"buffer percent" had.
The problem now is that the polling code did not register itself to the
writer that it wanted to wait for a specific "full" value of the ring
buffer. The result was that the writer would wake the polling waiter
whenever there was a new event. The polling waiter would then wake up, see
that there's not enough data in the ring buffer to notify user space and
then go back to sleep. The next event would wake it up again.
Before the polling fix was added, the code would wake up around 100 times
for a hackbench 30 benchmark. After the "fix", due to the constant waking
of the writer, it would wake up over 11,0000 times! It would never leave
the kernel, so the user space behavior was still "correct", but this
definitely is not the desired effect.
To fix this, have the polling code add what it's waiting for to the
"shortest_full" variable, to tell the writer not to wake it up if the
buffer is not as full as it expects to be.
Note, after this fix, it appears that the waiter is now woken up around 2x
the times it was before (~200). This is a tremendous improvement from the
11,000 times, but I will need to spend some time to see why polling is
more aggressive in its wakeups than the read blocking code.
Link: https://lore.kernel.org/linux-trace-kernel/20230929180113.01c2cae3@rorschach.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Fixes: 42fb0a1e84ff ("tracing/ring-buffer: Have polling block on watermark") Reported-by: Julia Lawall <julia.lawall@inria.fr> Tested-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'bytes' info in file 'per_cpu/cpu<X>/stats' means the number of
bytes in cpu buffer that have not been consumed. However, currently
after consuming data by reading file 'trace_pipe', the 'bytes' info
was not changed as expected.
The root cause is incorrect stat on cpu_buffer->read_bytes. To fix it:
1. When stat 'read_bytes', account consumed event in rb_advance_reader();
2. When stat 'entries_bytes', exclude the discarded padding event which
is smaller than minimum size because it is invisible to reader. Then
use rb_page_commit() instead of BUF_PAGE_SIZE at where accounting for
page-based read/remove/overrun.
Also correct the comments of ring_buffer_bytes_cpu() in this patch.
Link: https://lore.kernel.org/linux-trace-kernel/20230921125425.1708423-1-zhengyejian1@huawei.com Cc: stable@vger.kernel.org Fixes: c64e148a3be3 ("trace: Add ring buffer stats to measure rate of events") Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cxl_pci fails to unmask CXL protocol errors when CXL memory error reporting
is not granted native control. Given that CXL memory error reporting uses
the event interface and protocol errors use AER, unmask protocol errors
based only on the native AER setting. Without this change end user
deployments will fail to report protocol errors in the case where native
memory error handling is not granted to Linux.
Also, return zero instead of an error code to not block the communication
with the cxl device when in native memory error reporting mode.
Fixes: 248529edc86f ("cxl: add RAS status unmasking for CXL") Cc: <stable@vger.kernel.org> Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com> Reviewed-by: Robert Richter <rrichter@amd.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20230823234305.27333-2-Smita.KoralahalliChannabasappa@amd.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The cxl_test unit test environment models a CXL topology for
sysfs/user-ABI regression testing. It uses interface mocking via the
"--wrap=" linker option to redirect cxl_core routines that parse
hardware registers with versions that just publish objects, like
devm_cxl_enumerate_decoders().
Starting with:
Commit 19ab69a60e3b ("cxl/port: Store the port's Component Register mappings in struct cxl_port")
...port register enumeration is moved into devm_cxl_add_port(). This
conflicts with the "cxl_test avoids emulating registers stance" so
either the port code needs to be refactored (too violent), or modified
so that register enumeration is skipped on "fake" cxl_test ports
(annoying, but straightforward).
This conflict has happened previously and the "check for platform
device" workaround to avoid instrusive refactoring was deployed in those
scenarios. In general, refactoring should only benefit production code,
test code needs to remain minimally instrusive to the greatest extent
possible.
This was missed previously because it may sometimes just cause warning
messages to be emitted, but it can also cause test failures. The
backport to -stable is only nice to have for clean cxl_test runs.
Fixes: 19ab69a60e3b ("cxl/port: Store the port's Component Register mappings in struct cxl_port") Cc: stable@vger.kernel.org Reported-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/169476525052.1013896.6235102957693675187.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is caused by the mem_cgroup_handle_over_high() not respecting the
gfp_mask of the allocation context. We used to only call this function on
resume to userspace, where no locks were held. But c9afe31ec443 ("memcg:
synchronously enforce memory.high for large overcharges") added a call
from the allocation context without considering the gfp.
Link: https://lkml.kernel.org/r/20230914152139.100822-1-hannes@cmpxchg.org Fixes: c9afe31ec443 ("memcg: synchronously enforce memory.high for large overcharges") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Breno Leitao <leitao@debian.org> Reported-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Muchun Song <songmuchun@bytedance.com> Cc: <stable@vger.kernel.org> [5.17+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 4b23a68f9536 ("mm/page_alloc: protect PCP lists with a spinlock")
bypasses the pcplist on lock contention and returns the page directly to
the buddy list of the page's migratetype.
For pages that don't have their own pcplist, such as CMA and HIGHATOMIC,
the migratetype is temporarily updated such that the page can hitch a ride
on the MOVABLE pcplist. Their true type is later reassessed when flushing
in free_pcppages_bulk(). However, when lock contention is detected after
the type was already overridden, the bypass will then put the page on the
wrong buddy list.
Once on the MOVABLE buddy list, the page becomes eligible for fallbacks
and even stealing. In the case of HIGHATOMIC, otherwise ineligible
allocations can dip into the highatomic reserves. In the case of CMA, the
page can be lost from the CMA region permanently.
Use a separate pcpmigratetype variable for the pcplist override. Use the
original migratetype when going directly to the buddy. This fixes the bug
and should make the intentions more obvious in the code.
Originally sent here to address the HIGHATOMIC case:
https://lore.kernel.org/lkml/20230821183733.106619-4-hannes@cmpxchg.org/
Changelog updated in response to the CMA-specific bug report.
[mgorman@techsingularity.net: updated changelog] Link: https://lkml.kernel.org/r/20230911181108.GA104295@cmpxchg.org Fixes: 4b23a68f9536 ("mm/page_alloc: protect PCP lists with a spinlock") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Joe Liu <joe.liu@mediatek.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the commit in Fixes:, if a module that created a slab cache does not
release all of its allocated objects before destroying the cache (at rmmod
time), we might end up releasing the kmem_cache object without removing it
from the slab_caches list thus corrupting the list as kmem_cache_destroy()
ignores the return value from shutdown_cache(), which in turn never removes
the kmem_cache object from slabs_list in case __kmem_cache_shutdown() fails
to release all of the cache's slabs.
This is easily observable on a kernel built with CONFIG_DEBUG_LIST=y
as after that ill release the system will immediately trip on list_add,
or list_del, assertions similar to the one shown below as soon as another
kmem_cache gets created, or destroyed:
[ 1041.213632] list_del corruption. next->prev should be ffff89f596fb5768, but was 52f1e5016aeee75d. (next=ffff89f595a1b268)
[ 1041.219165] ------------[ cut here ]------------
[ 1041.221517] kernel BUG at lib/list_debug.c:62!
[ 1041.223452] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 1041.225408] CPU: 2 PID: 1852 Comm: rmmod Kdump: loaded Tainted: G B W OE 6.5.0 #15
[ 1041.228244] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc37 05/24/2023
[ 1041.231212] RIP: 0010:__list_del_entry_valid+0xae/0xb0
Another quick way to trigger this issue, in a kernel with CONFIG_SLUB=y,
is to set slub_debug to poison the released objects and then just run
cat /proc/slabinfo after removing the module that leaks slab objects,
in which case the kernel will panic:
[ 50.954843] general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 [#1] PREEMPT SMP PTI
[ 50.961545] CPU: 2 PID: 1495 Comm: cat Kdump: loaded Tainted: G B W OE 6.5.0 #15
[ 50.966808] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc37 05/24/2023
[ 50.972663] RIP: 0010:get_slabinfo+0x42/0xf0
This patch fixes this issue by properly checking shutdown_cache()'s
return value before taking the kmem_cache_release() branch.
Fixes: 0495e337b703 ("mm/slab_common: Deleting kobject in kmem_cache_destroy() without holding slab_mutex/cpu_hotplug_lock") Signed-off-by: Rafael Aquini <aquini@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Waiman Long <longman@redhat.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calling mbind() with MPOL_MF_{MOVE|MOVEALL} | MPOL_MF_STRICT, kernel
should attempt to migrate all existing pages, and return -EIO if there is
misplaced or unmovable page. Then commit 6f4576e3687b ("mempolicy: apply
page table walker on queue_pages_range()") messed up the return value and
didn't break VMA scan early ianymore when MPOL_MF_STRICT alone. The
return value problem was fixed by commit a7f40cfe3b7a ("mm: mempolicy:
make mbind() return -EIO when MPOL_MF_STRICT is specified"), but it broke
the VMA walk early if unmovable page is met, it may cause some pages are
not migrated as expected.
The code should conceptually do:
if (MPOL_MF_MOVE|MOVEALL)
scan all vmas
try to migrate the existing pages
return success
else if (MPOL_MF_MOVE* | MPOL_MF_STRICT)
scan all vmas
try to migrate the existing pages
return -EIO if unmovable or migration failed
else /* MPOL_MF_STRICT alone */
break early if meets unmovable and don't call mbind_range() at all
else /* none of those flags */
check the ranges in test_walk, EFAULT without mbind_range() if discontig.
Fixed the behavior.
Link: https://lkml.kernel.org/r/20230920223242.3425775-1-yang@os.amperecomputing.com Fixes: a7f40cfe3b7a ("mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified") Signed-off-by: Yang Shi <yang@os.amperecomputing.com> Cc: Hugh Dickins <hughd@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Oscar Salvador <osalvador@suse.de> Cc: Rafael Aquini <aquini@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> [4.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When CONFIG_DAMON_VADDR_KUNIT_TEST=y and making CONFIG_DEBUG_KMEMLEAK=y
and CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y, the below memory leak is detected.
Since commit 9f86d624292c ("mm/damon/vaddr-test: remove unnecessary
variables"), the damon_destroy_ctx() is removed, but still call
damon_new_target() and damon_new_region(), the damon_region which is
allocated by kmem_cache_alloc() in damon_new_region() and the damon_target
which is allocated by kmalloc in damon_new_target() are not freed. And
the damon_region which is allocated in damon_new_region() in
damon_set_regions() is also not freed.
So use damon_destroy_target to free all the damon_regions and damon_target.
There is no code for this config option and enabling it in defconfig
causes warnings from tools which are detecting unused and obsolete
kernel config flags since the flag will be completely missing from
effective build config after "make olddefconfig".
Fixes yocto kernel recipe build time warning:
WARNING: [kernel config]: This BSP contains fragments with warnings:
...
[INFO]: the following symbols were not found in the active
configuration:
- CONFIG_COMMON_CLK_NPCM8XX
The following debug output was observed while testing CXL
cxl_core:cxl_walk_cel:721: cxl_mock_mem cxl_mem.0: Opcode 0x4300 unsupported by driver
opcode 0x4300 (Get Poison) is supported by the driver and the mock
device supports it. The logic should be checking that the opcode is
both not poison and not security.
Fix the logic to allow poison and security commands.
Fixes: ad64f5952ce3 ("cxl/memdev: Only show sanitize sysfs files when supported") Cc: <stable@vger.kernel.org> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20230903-cxl-cel-fix-v1-1-e260c9467be3@intel.com
[cleanup cxl_walk_cel() to centralized "enabled" checks] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While drm_mm test was converted form igt selftest to kunit, unexpected
value of "end" argument equal "start" was introduced to one of calls to a
function that executes the drm_test_mm_insert_range for specific start/end
pair of arguments. As a consequence, DRM_MM_BUG_ON(end <= start) is
triggered. Fix it by restoring the original value.
Fixes: fc8d29e298cf ("drm: selftest: convert drm_mm selftest to KUnit") Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: "Maíra Canal" <mairacanal@riseup.net> Cc: Arthur Grillo <arthurgrillo@riseup.net> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Daniel Latypov <dlatypov@google.com> Cc: stable@vger.kernel.org # v6.1+ Reviewed-by: Maíra Canal <mairacanal@riseup.net> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230911130323.7037-2-janusz.krzysztofik@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Specific stress involving frequent CPU-hotplug operations, such as
running rcutorture for example, may trigger the following message:
NOHZ tick-stop error: local softirq work is pending, handler #02!!!"
This happens in the CPU-down hotplug process, after
CPUHP_AP_SMPBOOT_THREADS whose teardown callback parks ksoftirqd, and
before the target CPU shuts down through CPUHP_AP_IDLE_DEAD. In this
fragile intermediate state, softirqs waiting for threaded handling may be
forever ignored and eventually reported by the idle task as in the above
example.
However some vectors are known to be safe as long as the corresponding
subsystems have teardown callbacks handling the migration of their
events. The above error message reports pending timers softirq although
this vector can be considered as hotplug safe because the
CPUHP_TIMERS_PREPARE teardown callback performs the necessary migration
of timers after the death of the CPU. Hrtimers also have a similar
hotplug handling.
Therefore this error message, as far as (hr-)timers are concerned, can
be considered spurious and the relevant softirq vectors can be marked as
hotplug safe.
Fixes: 0345691b24c0 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle") Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230912104406.312185-6-frederic@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
acpi_nfit_interleave's field 'line_offset' is switched to flexible array [1],
but sizeof_idt() still calculates the size in the form of 1-element array.
Therefore, fix incorrect calculation in sizeof_idt().
Commit 4dc73c679114 reintroduces the deadlock that was fixed by commit aeabb3c96186 ("NFSv4: Fix a NFSv4 state manager deadlock") because it
prevents the setup of new threads to handle reboot recovery, while the
older recovery thread is stuck returning delegations.
Fixes: 4dc73c679114 ("NFSv4: keep state manager thread active if swap is enabled") Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The problem this commit is intended to fix was comprehensively fixed
in commit 7de62bc09fe6 ("SUNRPC dont update timeout value on connection
reset").
Since then, this commit has been preventing the correct timeout of soft
mounted requests.
Cc: stable@vger.kernel.org # 5.9.x: 09252177d5f9: SUNRPC: Handle major timeout in xprt_adjust_timeout() Cc: stable@vger.kernel.org # 5.9.x: 7de62bc09fe6: SUNRPC dont update timeout value on connection reset Cc: stable@vger.kernel.org # 5.9.x Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During RCU-boost testing with the TREE03 rcutorture config, I found that
after a few hours, the machine locks up.
On tracing, I found that there is a live lock happening between 2 CPUs.
One CPU has an RT task running, while another CPU is being offlined
which also has an RT task running. During this offlining, all threads
are migrated. The migration thread is repeatedly scheduled to migrate
actively running tasks on the CPU being offlined. This results in a live
lock because select_fallback_rq() keeps picking the CPU that an RT task
is already running on only to get pushed back to the CPU being offlined.
It is anyway pointless to pick CPUs for pushing tasks to if they are
being offlined only to get migrated away to somewhere else. This could
also add unwanted latency to this task.
Fix these issues by not selecting CPUs in RT if they are not 'active'
for scheduling, using the cpu_active_mask. Other parts in core.c already
use cpu_active_mask to prevent tasks from being put on CPUs going
offline.
With this fix I ran the tests for days and could not reproduce the
hang. Without the patch, I hit it in a few hours.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Paul E. McKenney <paulmck@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230923011409.3522762-1-joel@joelfernandes.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Initial booting is setting the task flag to idle (PF_IDLE) by the call
path sched_init() -> init_idle(). Having the task idle and calling
call_rcu() in kernel/rcu/tiny.c means that TIF_NEED_RESCHED will be
set. Subsequent calls to any cond_resched() will enable IRQs,
potentially earlier than the IRQ setup has completed. Recent changes
have caused just this scenario and IRQs have been enabled early.
This causes a warning later in start_kernel() as interrupts are enabled
before they are fully set up.
Fix this issue by setting the PF_IDLE flag later in the boot sequence.
Although the boot task was marked as idle since (at least) d80e4fda576d,
I am not sure that it is wrong to do so. The forced context-switch on
idle task was introduced in the tiny_rcu update, so I'm going to claim
this fixes 5f6130fa52ee.
Fixes: 5f6130fa52ee ("tiny_rcu: Directly force QS when call_rcu_[bh|sched]() on idle_task") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-mm/CAMuHMdWpvpWoDa=Ox-do92czYRvkok6_x6pYUH+ZouMcJbXy+Q@mail.gmail.com/ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Like the Lenovo 82TL and 82V2, the Lenovo 82QF (Yoga 7 14ARB7) and 82UG
(Legion S7 16ARHA7) both need a quirk entry for the internal microphone to
function. Commit c008323fe361 ("ASoC: amd: yc: Fix a non-functional mic on
Lenovo 82SJ") restricted the quirk that previously matched "82" to "82V2",
breaking microphone functionality on these devices. Fix this by adding
specific quirks for these models, as was done for the Lenovo 82TL.
This is unionized with the actual link flags, so they can of course be
set and they will be evaluated further down. If not we fail any LINKAT
that has to set option flags.
Fixes: cf30da90bc3a ("io_uring: add support for IORING_OP_LINKAT") Cc: stable@vger.kernel.org Reported-by: Thomas Leonard <talex5@gmail.com> Link: https://github.com/axboe/liburing/issues/955 Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For REPORT SUPPORTED OPERATION CODES command, the service action field is
defined as bits 0-4 in the second byte in the CDB. Bits 5-7 in the second
byte are reserved.
Only look at the service action field in the second byte when determining
if the MAINTENANCE IN opcode is a REPORT SUPPORTED OPERATION CODES command.
This matches how we only look at the service action field in the second
byte when determining if the SERVICE ACTION IN(16) opcode is a READ
CAPACITY(16) command (reserved bits 5-7 in the second byte are ignored).
Fixes: 7b2030942859 ("libata: Add support for SCT Write Same") Cc: stable@vger.kernel.org Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If an error occurs when resuming a host adapter before the devices
attached to the adapter are resumed, the adapter low level driver may
remove the scsi host, resulting in a call to sd_remove() for the
disks of the host. This in turn results in a call to sd_shutdown() which
will issue a synchronize cache command and a start stop unit command to
spindown the disk. sd_shutdown() issues the commands only if the device
is not already runtime suspended but does not check the power state for
system-wide suspend/resume. That is, the commands may be issued with the
device in a suspended state, which causes PM resume to hang, forcing a
reset of the machine to recover.
Fix this by tracking the suspended state of a disk by introducing the
suspended boolean field in the scsi_disk structure. This flag is set to
true when the disk is suspended is sd_suspend_common() and resumed with
sd_resume(). When suspended is true, sd_shutdown() is not executed from
sd_remove().
Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The underlying device and driver of a SCSI disk may have different
system and runtime power mode control requirements. This is because
runtime power management affects only the SCSI disk, while system level
power management affects all devices, including the controller for the
SCSI disk.
For instance, issuing a START STOP UNIT command when a SCSI disk is
runtime suspended and resumed is fine: the command is translated to a
STANDBY IMMEDIATE command to spin down the ATA disk and to a VERIFY
command to wake it up. The SCSI disk runtime operations have no effect
on the ata port device used to connect the ATA disk. However, for
system suspend/resume operations, the ATA port used to connect the
device will also be suspended and resumed, with the resume operation
requiring re-validating the device link and the device itself. In this
case, issuing a VERIFY command to spinup the disk must be done before
starting to revalidate the device, when the ata port is being resumed.
In such case, we must not allow the SCSI disk driver to issue START STOP
UNIT commands.
Allow a low level driver to refine the SCSI disk start/stop management
by differentiating system and runtime cases with two new SCSI device
flags: manage_system_start_stop and manage_runtime_start_stop. These new
flags replace the current manage_start_stop flag. Drivers setting the
manage_start_stop are modifed to set both new flags, thus preserving the
existing start/stop management behavior. For backward compatibility, the
old manage_start_stop sysfs device attribute is kept as a read-only
attribute showing a value of 1 for devices enabling both new flags and 0
otherwise.
Fixes: 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no direct device ancestry defined between an ata_device and
its scsi device which prevents the power management code from correctly
ordering suspend and resume operations. Create such ancestry with the
ata device as the parent to ensure that the scsi device (child) is
suspended before the ata device and that resume handles the ata device
before the scsi device.
The parent-child (supplier-consumer) relationship is established between
the ata_port (parent) and the scsi device (child) with the function
device_add_link(). The parent used is not the ata_device as the PM
operations are defined per port and the status of all devices connected
through that port is controlled from the port operations.
The device link is established with the new function
ata_scsi_slave_alloc(), and this function is used to define the
->slave_alloc callback of the scsi host template of all ata drivers.
Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When build and update kernel with the latest upstream binutils and
loongson3_defconfig, module loader fails with:
kmod: zsmalloc: Unsupport relocation type 99, please add its support.
kmod: fuse: Unsupport relocation type 99, please add its support.
kmod: ipmi_msghandler: Unsupport relocation type 99, please add its support.
kmod: ipmi_msghandler: Unsupport relocation type 99, please add its support.
kmod: pstore: Unsupport relocation type 99, please add its support.
kmod: drm_display_helper: Unsupport relocation type 99, please add its support.
kmod: drm_display_helper: Unsupport relocation type 99, please add its support.
kmod: drm_display_helper: Unsupport relocation type 99, please add its support.
kmod: fuse: Unsupport relocation type 99, please add its support.
kmod: fat: Unsupport relocation type 99, please add its support.
This is because the latest upstream binutils replaces a pair of ADD32
and SUB32 with 32_PCREL, so add support for 32_PCREL relocation type.
For 64bit kernel without HIGHMEM, high_memory is the virtual address of
the highest physical address in the system. But __va(get_num_physpages()
<< PAGE_SHIFT) is not what we want for high_memory because there may be
holes in the physical address space. On the other hand, max_low_pfn is
calculated from memblock_end_of_DRAM(), which is exactly corresponding
to the highest physical address, so use it for high_memory calculation.
Since commit 0a6b58c5cd0d ("lockdep: fix static memory detection even
more") the lockdep code uses is_kernel_core_data(), is_kernel_rodata()
and init_section_contains() to verify if a lock is located inside a
kernel static data section.
This change triggers a failure on LoongArch, for which the vmlinux.lds.S
script misses to put the locks (as part of in the .data.rel symbols)
into the Linux data section.
This patch fixes the lockdep problem by moving *(.data.rel*) symbols
into the kernel data section (from _sdata to _edata).
Additionally, move other wrongly assigned symbols too:
- altinstructions into the _initdata section,
- PLT symbols behind the read-only section, and
- *(.la_abs) into the data section.
At the implementation of the optional proc fs in rawmidi, I forgot
that rmidi->ops itself is optional and can be NULL.
Add the proper NULL check for avoiding the Oops.
In sm2_compute_z_digest() function, the newly allocated structure
mpi_ec_ctx is used, but forget to initialize it, which will cause
a crash when performing subsequent operations.
In nilfs_gccache_submit_read_data(), brelse(bh) is called to drop the
reference count of bh when the call to nilfs_dat_translate() fails. If
the reference count hits 0 and its owner page gets unlocked, bh may be
freed. However, bh->b_page is dereferenced to put the page after that,
which may result in a use-after-free bug. This patch moves the release
operation after unlocking and putting the page.
NOTE: The function in question is only called in GC, and in combination
with current userland tools, address translation using DAT does not occur
in that function, so the code path that causes this issue will not be
executed. However, it is possible to run that code path by intentionally
modifying the userland GC library or by calling the GC ioctl directly.
[konishi.ryusuke@gmail.com: NOTE added to the commit log] Link: https://lkml.kernel.org/r/1543201709-53191-1-git-send-email-bianpan2016@163.com Link: https://lkml.kernel.org/r/20230921141731.10073-1-konishi.ryusuke@gmail.com Fixes: a3d93f709e89 ("nilfs2: block cache for garbage collection") Signed-off-by: Pan Bian <bianpan2016@163.com> Reported-by: Ferry Meng <mengferry@linux.alibaba.com> Closes: https://lkml.kernel.org/r/20230818092022.111054-1-mengferry@linux.alibaba.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case the leaf driver wants to use IRQ polling (irq = 0) and
IIR register shows that an interrupt happened in the 8250 hardware
the IRQ data can be NULL. In such a case we need to skip the wake
event as we came to this path from the timer interrupt and quite
likely system is already awake.
Without this fix we have got an Oops:
serial8250: ttyS0 at I/O 0x3f8 (irq = 0, base_baud = 115200) is a 16550A
...
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:serial8250_handle_irq+0x7c/0x240
Call Trace:
? serial8250_handle_irq+0x7c/0x240
? __pfx_serial8250_timeout+0x10/0x10
Some old drives (e.g. an Ultra320 SCSI disk as reported by John) do not
seem to execute MAINTENANCE_IN / MI_REPORT_SUPPORTED_OPERATION_CODES
commands correctly and hang when a non-zero service action is specified
(one command format with service action case in scsi_report_opcode()).
Currently, CDL probing with scsi_cdl_check_cmd() is the only caller using a
non zero service action for scsi_report_opcode(). To avoid issues with
these old drives, do not attempt CDL probe if the device reports support
for an SPC version lower than 5 (CDL was introduced in SPC-5). To keep
things working with ATA devices which probe for the CDL T2A and T2B pages
introduced with SPC-6, modify ata_scsiop_inq_std() to claim SPC-6 version
compatibility for ATA drives supporting CDL.
SPC-6 standard version number is defined as Dh (= 13) in SPC-6 r09. Fix
scsi_probe_lun() to correctly capture this value by changing the bit mask
for the second byte of the INQUIRY response from 0x7 to 0xf.
include/scsi/scsi.h is modified to add the definition SCSI_SPC_6 with the
value 14 (Dh + 1). The missing definitions for the SCSI_SPC_4 and
SCSI_SPC_5 versions are also added.
Reported-by: John David Anglin <dave.anglin@bell.net> Fixes: 624885209f31 ("scsi: core: Detect support for command duration limits") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20230915022034.678121-1-dlemoal@kernel.org Tested-by: David Gow <david@davidgow.net> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit above is reverted as it did not solve the original issue.
gsm_cleanup_mux() tries to free up the virtual ttys by calling
gsm_dlci_release() for each available DLCI. There, dlci_put() is called to
decrease the reference counter for the DLCI via tty_port_put() which
finally calls gsm_dlci_free(). This already clears the pointer which is
being checked in gsm_cleanup_mux() before calling gsm_dlci_release().
Therefore, it is not necessary to clear this pointer in gsm_cleanup_mux()
as done in the reverted commit. The commit introduces a null pointer
dereference:
<TASK>
? __die+0x1f/0x70
? page_fault_oops+0x156/0x420
? search_exception_tables+0x37/0x50
? fixup_exception+0x21/0x310
? exc_page_fault+0x69/0x150
? asm_exc_page_fault+0x26/0x30
? tty_port_put+0x19/0xa0
gsmtty_cleanup+0x29/0x80 [n_gsm]
release_one_tty+0x37/0xe0
process_one_work+0x1e6/0x3e0
worker_thread+0x4c/0x3d0
? __pfx_worker_thread+0x10/0x10
kthread+0xe1/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
The actual issue is that nothing guards dlci_put() from being called
multiple times while the tty driver was triggered but did not yet finished
calling gsm_dlci_free().
commit 101bd907b424 ("misc: rtsx: judge ASPM Mode to set PETXCFG Reg")
some readers no longer force #CLKREQ to low
when the system need to enter ASPM.
But some platform maybe not implement complete ASPM?
it causes some platforms can not boot
Like in the past only the platform support L1ss we release the #CLKREQ.
Move the judgment (L1ss) to probe,
we think read config space one time when the driver start is enough
On incoming TCP reset, subflow closing could happen before error
propagation. That in turn could cause the socket error being ignored,
and a missing socket state transition, as reported by Daire-Byrne.
Address the issues explicitly checking for subflow socket error at
close time. To avoid code duplication, factor-out of __mptcp_error_report()
a new helper implementing the relevant bits.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/429 Fixes: 15cc10453398 ("mptcp: deliver ssk errors to msk") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This will simplify the next patch ("mptcp: process pending subflow error
on close").
No functional change intended.
Cc: stable@vger.kernel.org # v5.12+ Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case multiple subflows race to update the mptcp-level receive
window, the subflow losing the race should use the window value
provided by the "winning" subflow to update it's own tcp-level
rcv_wnd.
To such goal, the current code bogusly uses the mptcp-level rcv_wnd
value as observed before the update attempt. On unlucky circumstances
that may lead to TCP-level window shrinkage, and stall the other end.
Address the issue feeding to the rcv wnd update the correct value.
Fixes: f3589be0c420 ("mptcp: never shrink offered window") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/427 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stop zapping invalidate TDP MMU roots via work queue now that KVM
preserves TDP MMU roots until they are explicitly invalidated. Zapping
roots asynchronously was effectively a workaround to avoid stalling a vCPU
for an extended during if a vCPU unloaded a root, which at the time
happened whenever the guest toggled CR0.WP (a frequent operation for some
guest kernels).
While a clever hack, zapping roots via an unbound worker had subtle,
unintended consequences on host scheduling, especially when zapping
multiple roots, e.g. as part of a memslot. Because the work of zapping a
root is no longer bound to the task that initiated the zap, things like
the CPU affinity and priority of the original task get lost. Losing the
affinity and priority can be especially problematic if unbound workqueues
aren't affined to a small number of CPUs, as zapping multiple roots can
cause KVM to heavily utilize the majority of CPUs in the system, *beyond*
the CPUs KVM is already using to run vCPUs.
When deleting a memslot via KVM_SET_USER_MEMORY_REGION, the async root
zap can result in KVM occupying all logical CPUs for ~8ms, and result in
high priority tasks not being scheduled in in a timely manner. In v5.15,
which doesn't preserve unloaded roots, the issues were even more noticeable
as KVM would zap roots more frequently and could occupy all CPUs for 50ms+.
Consuming all CPUs for an extended duration can lead to significant jitter
throughout the system, e.g. on ChromeOS with virtio-gpu, deleting memslots
is a semi-frequent operation as memslots are deleted and recreated with
different host virtual addresses to react to host GPU drivers allocating
and freeing GPU blobs. On ChromeOS, the jitter manifests as audio blips
during games due to the audio server's tasks not getting scheduled in
promptly, despite the tasks having a high realtime priority.
Deleting memslots isn't exactly a fast path and should be avoided when
possible, and ChromeOS is working towards utilizing MAP_FIXED to avoid the
memslot shenanigans, but KVM is squarely in the wrong. Not to mention
that removing the async zapping eliminates a non-trivial amount of
complexity.
Note, one of the subtle behaviors hidden behind the async zapping is that
KVM would zap invalidated roots only once (ignoring partial zaps from
things like mmu_notifier events). Preserve this behavior by adding a flag
to identify roots that are scheduled to be zapped versus roots that have
already been zapped but not yet freed.
Add a comment calling out why kvm_tdp_mmu_invalidate_all_roots() can
encounter invalid roots, as it's not at all obvious why zapping
invalidated roots shouldn't simply zap all invalid roots.
Reported-by: Pattara Teerapong <pteerapong@google.com> Cc: David Stevens <stevensd@google.com> Cc: Yiwei Zhang<zzyiwei@google.com> Cc: Paul Hsia <paulhsia@google.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230916003916.2545000-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All callers except the MMU notifier want to process all address spaces.
Remove the address space ID argument of for_each_tdp_mmu_root_yield_safe()
and switch the MMU notifier to use __for_each_tdp_mmu_root_yield_safe().
Extracted out of a patch by Sean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mmu_notifier path is a bit of a special snowflake, e.g. it zaps only a
single address space (because it's per-slot), and can't always yield.
Because of this, it calls kvm_tdp_mmu_zap_leafs() in ways that no one
else does.
Iterate manually over the leafs in response to an mmu_notifier
invalidation, instead of invoking kvm_tdp_mmu_zap_leafs(). Drop the
@can_yield param from kvm_tdp_mmu_zap_leafs() as its sole remaining
caller unconditionally passes "true".
Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230916003916.2545000-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The checks for virtualizing TSC_AUX occur during the vCPU reset processing
path. However, at the time of initial vCPU reset processing, when the vCPU
is first created, not all of the guest CPUID information has been set. In
this case the RDTSCP and RDPID feature support for the guest is not in
place and so TSC_AUX virtualization is not established.
This continues for each vCPU created for the guest. On the first boot of
an AP, vCPU reset processing is executed as a result of an APIC INIT
event, this time with all of the guest CPUID information set, resulting
in TSC_AUX virtualization being enabled, but only for the APs. The BSP
always sees a TSC_AUX value of 0 which probably went unnoticed because,
at least for Linux, the BSP TSC_AUX value is 0.
Move the TSC_AUX virtualization enablement out of the init_vmcb() path and
into the vcpu_after_set_cpuid() path to allow for proper initialization of
the support after the guest CPUID information has been set.
With the TSC_AUX virtualization support now in the vcpu_set_after_cpuid()
path, the intercepts must be either cleared or set based on the guest
CPUID input.
Fixes: 296d5a17e793 ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <4137fbcb9008951ab5f0befa74a0399d2cce809a.1694811272.git.thomas.lendacky@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
svm_recalc_instruction_intercepts() is always called at least once
before the vCPU is started, so the setting or clearing of the RDTSCP
intercept can be dropped from the TSC_AUX virtualization support.
Extracted from a patch by Tom Lendacky.
Cc: stable@vger.kernel.org Fixes: 296d5a17e793 ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SGX EPC reclaimer (ksgxd) may reclaim the SECS EPC page for an
enclave and set secs.epc_page to NULL. The SECS page is used for EAUG
and ELDU in the SGX page fault handler. However, the NULL check for
secs.epc_page is only done for ELDU, not EAUG before being used.
Fix this by doing the same NULL check and reloading of the SECS page as
needed for both EAUG and ELDU.
The SECS page holds global enclave metadata. It can only be reclaimed
when there are no other enclave pages remaining. At that point,
virtually nothing can be done with the enclave until the SECS page is
paged back in.
An enclave can not run nor generate page faults without a resident SECS
page. But it is still possible for a #PF for a non-SECS page to race
with paging out the SECS page: when the last resident non-SECS page A
triggers a #PF in a non-resident page B, and then page A and the SECS
both are paged out before the #PF on B is handled.
Hitting this bug requires that race triggered with a #PF for EAUG.
Following is a trace when it happens.
Make sure that the device is not runtime suspended before explicitly
disabling the clocks on probe failure and on driver unbind to avoid a
clock enable-count imbalance.
The commit 06ff87bae8d3 ("arm64: mm: remove unused functions and variable
protoypes") fixed a similar lockup on the CPU MMU side. Yet, it can occur
to SMMU too since arm_smmu_mm_invalidate_range() is typically called next
to MMU tlb flush function, e.g.
tlb_flush_mmu_tlbonly {
tlb_flush {
__flush_tlb_range {
// check MAX_TLBI_OPS
}
}
mmu_notifier_invalidate_range {
arm_smmu_mm_invalidate_range {
// does not check MAX_TLBI_OPS
}
}
}
Clone a CMDQ_MAX_TLBI_OPS from the MAX_TLBI_OPS in tlbflush.h, since in an
SVA case SMMU uses the CPU page table, so it makes sense to align with the
tlbflush code. Then, replace per-page TLBI commands with a single per-asid
TLBI command, if the request size hits this threshold.
Driver remove() must call pm_runtime_dont_use_autosuspend().
Drivers that call pm_runtime_use_autosuspend() must disable
it in driver remove(). Unfortunately until recently this was
only mentioned in 1 line in a 900+ line document so most
people hadn't noticed this. It has only recently been added
to the kerneldoc of pm_runtime_use_autosuspend().
Backport note: This is the same change as the upstream
commit but the cs35l56->base.dev argument in the upstream
code is cs35l56->dev in older releases.
Fix linker error if FB=m about missing fb_io_read and fb_io_write. The
linker's error message suggests that this config setting has already
been broken for other symbols.
All errors (new ones prefixed by >>):
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_probe':
sh7760fb.c:(.text+0x374): undefined reference to `framebuffer_alloc'
sh4-linux-ld: sh7760fb.c:(.text+0x394): undefined reference to `fb_videomode_to_var'
sh4-linux-ld: sh7760fb.c:(.text+0x39c): undefined reference to `fb_alloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x3a4): undefined reference to `register_framebuffer'
sh4-linux-ld: sh7760fb.c:(.text+0x3ac): undefined reference to `fb_dealloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x434): undefined reference to `framebuffer_release'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_remove':
sh7760fb.c:(.text+0x800): undefined reference to `unregister_framebuffer'
sh4-linux-ld: sh7760fb.c:(.text+0x804): undefined reference to `fb_dealloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x814): undefined reference to `framebuffer_release'
>> sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0xc): undefined reference to `fb_io_read'
>> sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x10): undefined reference to `fb_io_write'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x2c): undefined reference to `cfb_fillrect'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x30): undefined reference to `cfb_copyarea'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x34): undefined reference to `cfb_imageblit'
Suggested-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309130632.LS04CPWu-lkp@intel.com/ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230918090400.13264-1-tzimmermann@suse.de Signed-off-by: Sasha Levin <sashal@kernel.org>
The reason is early memblock_reserve() in memblock_init() set node id to
MAX_NUMNODES, making NODE_DATA(nid) a NULL dereference in the call chain
reserve_bootmem_region() -> init_reserved_page(). After memblock_init(),
those late calls of memblock_reserve() operate on subregions of memblock
.memory regions. As a result, these reserved regions will be set to the
correct node at the first iteration of memmap_init_reserved_pages().
So set all reserved memblocks on Node#0 at initialization can avoid this
panic.
Reported-by: WANG Xuerui <git@xen0n.name> Tested-by: WANG Xuerui <git@xen0n.name> Reviewed-by: WANG Xuerui <git@xen0n.name> # with nits addressed Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Sasha Levin <sashal@kernel.org>
The DesignWare IP can be synthesized with the IC_EMPTYFIFO_HOLD_MASTER_EN
parameter.
In this case, when the TX FIFO gets empty and the last command didn't have
the STOP bit (IC_DATA_CMD[9]), the controller will hold SCL low until
a new command is pushed into the TX FIFO or the transfer is aborted.
When the controller is holding SCL low, it cannot be disabled.
The transfer must first be aborted.
Also, the bus recovery won't work because SCL is held low by the master.
Check if the master is holding SCL low in __i2c_dw_disable() before trying
to disable the controller. If SCL is held low, an abort is initiated.
When the abort is done, then proceed with disabling the controller.
This whole situation can happen for instance during SMBus read data block
if the slave just responds with "byte count == 0".
This puts the driver in an unrecoverable state, because the controller is
holding SCL low and the current __i2c_dw_disable() procedure is not
working. In this situation only a SoC reset can fix the i2c bus.
Co-developed-by: Jonathan Borne <jborne@kalray.eu> Signed-off-by: Jonathan Borne <jborne@kalray.eu> Signed-off-by: Yann Sionneau <ysionneau@kalray.eu> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Before this patch, function gfs2_scan_glock_lru would only try to free
glocks that had a reference count of 0. But if the reference count ever
got to 0, the glock should have already been freed.
Shrinker function gfs2_dispose_glock_lru checks whether glocks on the
LRU are demote_ok, and if so, tries to demote them. But that's only
possible if the reference count is at least 1.
This patch changes gfs2_scan_glock_lru so it will try to demote and/or
dispose of glocks that have a reference count of 1 and which are either
demotable, or are already unlocked.
Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to the NAPI documentation networking/napi.rst, Rx specific
APIs like page pool and XDP cannot be used at all when budget is 0.
skb Tx processing should happen regardless of the budget.
Stop NAPI polling after Tx processing and skip Rx processing if budget
is 0.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to the NAPI documentation networking/napi.rst, for the ethtool
API a channel is a IRQ/NAPI which services queues of a given type.
tsnep uses a single IRQ/NAPI instance for every TX/RX queue pair.
Therefore, combined channels shall be returned instead of separate tx/rx
channels.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to the NAPI documentation networking/napi.rst, drivers which
have to mask interrupts explicitly should use the napi_schedule_prep()
and __napi_schedule() calls.
No problem seen so far with current implementation. Nevertheless, let's
align the implementation with documentation.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Struct hsr_sup_tlv describes HW layout and therefore it needs a __packed
attribute to ensure the compiler does not add any padding.
Due to the size and __packed attribute of the structs that use
hsr_sup_tlv it has no functional impact.
Add __packed to struct hsr_sup_tlv.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Report the carrier/no-carrier state for the network interface
shared between the BMC and the passthrough channel. Without this
functionality the BMC is unable to reconfigure the NIC in the event
of a re-cabling to a different subnet.
Signed-off-by: Johnathan Mantey <johnathanx.mantey@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
It can be easy to miss that the notifier mechanism invokes the callbacks
in an atomic context, so add some comments to that effect on the two
handlers we register here.
This is called in an atomic context, so is not allowed to sleep if a
user page needs to be faulted in and has nowhere it can be deferred to.
The pagefault_disabled() function is documented as preventing user
access methods from sleeping.
In practice the page will be mapped in nearly always because we are
reading the instruction that just triggered the watchpoint trap.
thread_change_pc() uses CPU local data, so must be protected from
swapping CPUs while it is reading the breakpoint struct.
The error is more noticeable after 1e60f3564bad ("powerpc/watchpoints:
Track perf single step directly on the breakpoint"), which added an
unconditional __this_cpu_read() call in thread_change_pc(). However the
existing __this_cpu_read() that runs if a breakpoint does need to be
re-inserted has the same issue.
20s seems unnecessarily large for the DSP init timeout. This coupled with
multiple FW boot attempts causes an excessive delay in the error path when
booting in recovery mode. Reduce it to 0.5s and use the existing
HDA_DSP_INIT_TIMEOUT_US.
Link: https://github.com/thesofproject/linux/issues/4565 Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230915134153.9688-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / linux-stable / log