rbtree lazy gc on insert might collect an end interval element that has
been just added in this transactions, skip end interval elements that
are not yet active.
DDPP: Disable Data path Parity Protection.
When it is 0x0, Data path Parity Protection is enabled.
When it is 0x1, Data path Parity Protection is disabled.
The cited commit introduces and uses the string constants dpp_tx_err and
dpp_rx_err. These are assigned to constant fields of the array
dwxgmac3_error_desc.
It has been reported that on GCC 6 and 7.5.0 this results in warnings
such as:
.../dwxgmac2_core.c:836:20: error: initialiser element is not constant
{ true, "TDPES0", dpp_tx_err },
I have been able to reproduce this using: GCC 7.5.0, 8.4.0, 9.4.0 and 10.5.0.
But not GCC 13.2.0.
So it seems this effects older compilers but not newer ones.
As Jon points out in his report, the minimum compiler supported by
the kernel is GCC 5.1, so it does seem that this ought to be fixed.
It is not clear to me what combination of 'const', if any, would address
this problem. So this patch takes of using #defines for the string
constants
Compile tested only.
Fixes: 46eba193d04f ("net: stmmac: xgmac: fix handling of DPP safety error for DMA channels") Reported-by: Jon Hunter <jonathanh@nvidia.com> Closes: https://lore.kernel.org/netdev/c25eb595-8d91-40ea-9f52-efa15ebafdbc@nvidia.com/ Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202402081135.lAxxBXHk-lkp@intel.com/ Signed-off-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240208-xgmac-const-v1-1-e69a1eeabfc8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we have multiple clients and some/all are flooding the receives to
such an extent that we can retry a LOT handling multishot receives, then
we can be starving some clients and hence serving traffic in an
imbalanced fashion.
Limit multishot retry attempts to some arbitrary value, whose only
purpose serves to ensure that we don't keep serving a single connection
for way too long. We default to 32 retries, which should be more than
enough to provide fairness, yet not so small that we'll spend too much
time requeuing rather than handling traffic.
Since our poll handling is edge triggered, multishot handlers retry
internally until they know that no more data is available. In
preparation for limiting these retries, add an internal return code,
IOU_REQUEUE, which can be used to inform the poll backend about the
handler wanting to retry, but that this should happen through a normal
task_work requeue rather than keep hammering on the issue side for this
one request.
No functional changes in this patch, nobody is using this return code
just yet.
If we use IORING_OP_RECV with provided buffers and pass in '0' as the
length of the request, the length is retrieved from the selected buffer.
If MSG_WAITALL is also set and we get a short receive, then we may hit
the retry path which decrements sr->len and increments the buffer for
a retry. However, the length is still zero at this point, which means
that sr->len now becomes huge and import_ubuf() will cap it to
MAX_RW_COUNT and subsequently return -EFAULT for the range as a whole.
Fix this by always assigning sr->len once the buffer has been selected.
This patch replaces max(a, min(b, c)) by clamp(b, a, c) in the solo6x10
driver. This improves the readability and more importantly, for the
solo6x10-p2m.c file, this reduces on my system (x86-64, gcc 13):
- the preprocessed size from 121 MiB to 4.5 MiB;
- the build CPU time from 46.8 s to 1.6 s;
- the build memory from 2786 MiB to 98MiB.
In fine, this allows this relatively simple C file to be built on a
32-bit system.
After commit 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in
translated mode") the keyboard on Dell XPS 13 9350 / 9360 / 9370 models
has stopped working after a suspend/resume.
The problem appears to be that atkbd_probe() fails when called
from atkbd_reconnect() on resume, which on systems where
ATKBD_CMD_GETID is skipped can only happen by ATKBD_CMD_SETLEDS
failing. ATKBD_CMD_SETLEDS failing because ATKBD_CMD_GETID was
skipped is weird, but apparently that is what is happening.
Fix this by also skipping ATKBD_CMD_SETLEDS when skipping
ATKBD_CMD_GETID.
Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://lore.kernel.org/linux-input/0aa4a61f-c939-46fe-a572-08022e8931c7@molgen.mpg.de/ Closes: https://bbs.archlinux.org/viewtopic.php?pid=2146300 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218424 Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2260517 Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240126160724.13278-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When closing the laptop lid with an external screen connected, the mouse
pointer has a constant movement to the lower right corner. Opening the
lid again stops this movement, but after that the touchpad does no longer
register clicks.
The touchpad is connected both via i2c-hid and PS/2, the predecessor of
this device (NS70MU) has the same layout in this regard and also strange
behaviour caused by the psmouse and the i2c-hid driver fighting over
touchpad control. This fix is reusing the same workaround by just
disabling the PS/2 aux port, that is only used by the touchpad, to give the
i2c-hid driver the lone control over the touchpad.
The hrtimers migration on CPU-down hotplug process has been moved
earlier, before the CPU actually goes to die. This leaves a small window
of opportunity to queue an hrtimer in a blind spot, leaving it ignored.
For example a practical case has been reported with RCU waking up a
SCHED_FIFO task right before the CPUHP_AP_IDLE_DEAD stage, queuing that
way a sched/rt timer to the local offline CPU.
Make sure such situations never go unnoticed and warn when that happens.
Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier") Reported-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240129235646.3171983-4-boqun.feng@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xHCI 4.9 explicitly forbids assuming that the xHC has released its
ownership of a multi-TRB TD when it reports an error on one of the
early TRBs. Yet the driver makes such assumption and releases the TD,
allowing the remaining TRBs to be freed or overwritten by new TDs.
The xHC should also report completion of the final TRB due to its IOC
flag being set by us, regardless of prior errors. This event cannot
be recognized if the TD has already been freed earlier, resulting in
"Transfer event TRB DMA ptr not part of current TD" error message.
Fix this by reusing the logic for processing isoc Transaction Errors.
This also handles hosts which fail to report the final completion.
Fix transfer length reporting on Babble errors. They may be caused by
device malfunction, no guarantee that the buffer has been filled.
The last TRB of a isoc TD might not trigger an event if there was
an error event for a TRB mid TD. This is seen on a NEC Corporation
uPD720200 USB 3.0 Host
After an error mid a multi-TRB TD the xHC should according to xhci 4.9.1
generate events for passed TRBs with IOC flag set if it proceeds to the
next TD. This event is either a copy of the original error, or a
"success" transfer event.
If that event is missing then the driver and xHC host get out of sync as
the driver is still expecting a transfer event for that first TD, while
xHC host is already sending events for the next TD in the list.
This leads to
"Transfer event TRB DMA ptr not part of current TD" messages.
As a solution we tag the isoc TDs that get error events mid TD.
If an event doesn't match the first TD, then check if the tag is
set, and event points to the next TD.
In that case give back the fist TD and process the next TD normally
Make sure TD status and transferred length stay valid in both cases
with and without final TD completion event.
Upstream commit bac1ec551434 ("usb: xhci: Set quirk for
XHCI_SG_TRB_CACHE_SIZE_QUIRK") introduced a new quirk in XHCI
which fixes XHC timeout, which was seen on synopsys XHCs while
using SG buffers. Currently this quirk can only be set using
xhci private data. But there are some drivers like dwc3/host.c
which adds adds quirks using software node for xhci device.
Hence set this xhci quirk by iterating over device properties.
Cc: stable@vger.kernel.org # 5.11 Fixes: bac1ec551434 ("usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK") Signed-off-by: Prashanth K <quic_prashk@quicinc.com> Link: https://lore.kernel.org/r/20240116055816.1169821-3-quic_prashk@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Upstream commit bac1ec551434 ("usb: xhci: Set quirk for
XHCI_SG_TRB_CACHE_SIZE_QUIRK") introduced a new quirk in XHCI
which fixes XHC timeout, which was seen on synopsys XHCs while
using SG buffers. But the support for this quirk isn't present
in the DWC3 layer.
We will encounter this XHCI timeout/hung issue if we run iperf
loopback tests using RTL8156 ethernet adaptor on DWC3 targets
with scatter-gather enabled. This gets resolved after enabling
the XHCI_SG_TRB_CACHE_SIZE_QUIRK. This patch enables it using
the xhci device property since its needed for DWC3 controller.
In Synopsys DWC3 databook,
Table 9-3: xHCI Debug Capability Limitations
Chained TRBs greater than TRB cache size: The debug capability
driver must not create a multi-TRB TD that describes smaller
than a 1K packet that spreads across 8 or more TRBs on either
the IN TR or the OUT TR.
During memory error injection test on kernels >= v6.4, the kernel panics
like below. However, this issue couldn't be reproduced on kernels <= v6.3.
mce: [Hardware Error]: CPU 296: Machine Check Exception: f Bank 1: bd80000000100134
mce: [Hardware Error]: RIP 10:<ffffffff821b9776> {__get_user_nocheck_4+0x6/0x20}
mce: [Hardware Error]: TSC 411a93533ed ADDR 346a8730040 MISC 86
mce: [Hardware Error]: PROCESSOR 0:a06d0 TIME 1706000767 SOCKET 1 APIC 211 microcode 80001490
mce: [Hardware Error]: Run the above through 'mcelog --ascii'
mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel
Kernel panic - not syncing: Fatal local machine check
The MCA code can recover from an in-kernel #MC if the fixup type is
EX_TYPE_UACCESS, explicitly indicating that the kernel is attempting to
access userspace memory. However, if the fixup type is EX_TYPE_DEFAULT
the only thing that is raised for an in-kernel #MC is a panic.
ex_handler_uaccess() would warn if users gave a non-canonical addresses
(with bit 63 clear) to {get, put}_user(), which was unexpected.
Therefore, commit
b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()")
replaced _ASM_EXTABLE_UA() with _ASM_EXTABLE() for {get, put}_user()
fixups. However, the new fixup type EX_TYPE_DEFAULT results in a panic.
Commit
6014bc27561f ("x86-64: make access_ok() independent of LAM")
added the check gp_fault_address_ok() right before the WARN_ONCE() in
ex_handler_uaccess() to not warn about non-canonical user addresses due
to LAM.
With that in place, revert back to _ASM_EXTABLE_UA() for {get,put}_user()
exception fixups in order to be able to handle in-kernel MCEs correctly
again.
[ bp: Massage commit message. ]
Fixes: b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()") Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20240129063842.61584-1-qiuxu.zhuo@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Given that ERROR_RECOVERY calls into PORT_RESET for Hi-Zing
the CC pins, setting CC pins to default state during PORT_RESET
breaks error recovery.
4.5.2.2.2.1 ErrorRecovery State Requirements
The port shall not drive VBUS or VCONN, and shall present a
high-impedance to ground (above zOPEN) on its CC1 and CC2 pins.
Hi-Zing the CC pins is the inteded behavior for PORT_RESET.
CC pins are set to default state after tErrorRecovery in
PORT_RESET_WAIT_OFF.
4.5.2.2.2.2 Exiting From ErrorRecovery State
A Sink shall transition to Unattached.SNK after tErrorRecovery.
A Source shall transition to Unattached.SRC after tErrorRecovery.
Cc: stable@vger.kernel.org Cc: Frank Wang <frank.wang@rock-chips.com> Fixes: 1e35f074399d ("usb: typec: tcpm: fix cc role at port reset") Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240117114742.2587779-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device IMST USB-Stick for Smart Meter is a rebranded IMST iM871A-USB
Wireless M-Bus USB-adapter. It is used to read wireless water, gas and
electricity meters.
Signed-off-by: Leonard Dallmayr <leonard.dallmayr@mailbox.org> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the USB serial option driver support for the Fibocom
FM101-GL
LTE modules as there are actually several different variants.
- VID:PID 2cb7:01a3, FM101-GL are laptop M.2 cards (with
MBIM interfaces for /Linux/Chrome OS)
The RODE NT-USB+ is marketed as a professional usb microphone, however the
usb audio interface is a mess:
[ 1.130977] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[ 1.503906] usb 1-5: config 1 has an invalid interface number: 5 but max is 4
[ 1.503912] usb 1-5: config 1 has no interface number 4
[ 1.519689] usb 1-5: New USB device found, idVendor=19f7, idProduct=0035, bcdDevice= 1.09
[ 1.519695] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.519697] usb 1-5: Product: RØDE NT-USB+
[ 1.519699] usb 1-5: Manufacturer: RØDE
[ 1.519700] usb 1-5: SerialNumber: 1D773A1A
[ 8.327495] usb 1-5: 1:1: cannot get freq at ep 0x82
[ 8.344500] usb 1-5: 1:2: cannot get freq at ep 0x82
[ 8.365499] usb 1-5: 2:1: cannot get freq at ep 0x2
Add QUIRK_FLAG_GET_SAMPLE_RATE to work around the broken sample rate get.
I have asked Rode support to fix it, but they show no interest.
When iocg_kick_delay() is called from a CPU different than the one which set
the delay, @now may be in the past of @iocg->delay_at leading to the
following warning:
UBSAN: shift-out-of-bounds in block/blk-iocost.c:1359:23
shift exponent 18446744073709 is too large for 64-bit type 'u64' (aka 'unsigned long long')
...
Call Trace:
<TASK>
dump_stack_lvl+0x79/0xc0
__ubsan_handle_shift_out_of_bounds+0x2ab/0x300
iocg_kick_delay+0x222/0x230
ioc_rqos_merge+0x1d7/0x2c0
__rq_qos_merge+0x2c/0x80
bio_attempt_back_merge+0x83/0x190
blk_attempt_plug_merge+0x101/0x150
blk_mq_submit_bio+0x2b1/0x720
submit_bio_noacct_nocheck+0x320/0x3e0
__swap_writepage+0x2ab/0x9d0
The underflow itself doesn't really affect the behavior in any meaningful
way; however, the past timestamp may exaggerate the delay amount calculated
later in the code, which shouldn't be a material problem given the nature of
the delay mechanism.
If @now is in the past, this CPU is racing another CPU which recently set up
the delay and there's nothing this CPU can contribute w.r.t. the delay.
Let's bail early from iocg_kick_delay() in such cases.
The percpu area overflow_stacks is exported from arch/riscv/kernel/traps.c
for use in the entry code, but is not declared anywhere. Add the relevant
declaration to arch/riscv/include/asm/stacktrace.h to silence the following
sparse warning:
arch/riscv/kernel/traps.c:395:1: warning: symbol '__pcpu_scope_overflow_stack' was not declared. Should it be static?
We don't add the stackinfo_get_overflow() call as for some of the other
architectures as this doesn't seem to be used yet, so just silence the
warning.
A short read may occur while reading the message footer from the
socket. Later, when the socket is ready for another read, the
messenger invokes all read_partial_*() handlers, including
read_partial_sparse_msg_data(). The expectation is that
read_partial_sparse_msg_data() would bail, allowing the messenger to
invoke read_partial() for the footer and pick up where it left off.
However read_partial_sparse_msg_data() violates that and ends up
calling into the state machine in the OSD client. The sparse-read
state machine assumes that it's a new op and interprets some piece of
the footer as the sparse-read header and returns bogus extents/data
length, etc.
To determine whether read_partial_sparse_msg_data() should bail, let's
reuse cursor->total_resid. Because once it reaches to zero that means
all the extents and data have been successfully received in last read,
else it could break out when partially reading any of the extents and
data. And then osd_sparse_read() could continue where it left off.
[ idryomov: changelog ]
Link: https://tracker.ceph.com/issues/63586 Fixes: d396f89db39a ("libceph: add sparse read support to msgr1") Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
These functions are supposed to behave like other read_partial_*()
handlers: the contract with messenger v1 is that the handler bails if
the area of the message it's responsible for is already processed.
This comes up when handling short reads from the socket.
[ idryomov: changelog ]
Signed-off-by: Xiubo Li <xiubli@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Stable-dep-of: 8e46a2d068c9 ("libceph: just wait for more data to be available on the socket") Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 4373534a9850 ("scsi: core: Move scsi_host_busy() out of host lock
for waking up EH handler") intended to fix a hard lockup issue triggered by
EH. The core idea was to move scsi_host_busy() out of the host lock when
processing individual commands for EH. However, a suggested style change
inadvertently caused scsi_host_busy() to remain under the host lock. Fix
this by calling scsi_host_busy() outside the lock.
Fixes: 4373534a9850 ("scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler") Cc: Sathya Prakash Veerichetty <safhya.prakash@broadcom.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20240203024521.2006455-1-ming.lei@redhat.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The spare_init() calls memmap_populate() many times to create VA to PA
mapping for the VMEMMAP area, where all "struct page" are located once
CONFIG_SPARSEMEM_VMEMMAP is defined. These "struct page" are later
initialized in the zone_sizes_init() function. However, during this
process, no sfence.vma instruction is executed for this VMEMMAP area.
This omission may cause the hart to fail to perform page table walk
because some data related to the address translation is invisible to the
hart. To solve this issue, the local_flush_tlb_kernel_range() is called
right after the sparse_init() to execute a sfence.vma instruction for this
VMEMMAP area, ensuring that all data related to the address translation
is visible to the hart.
The pcpu setup when using the page allocator sets up a new vmalloc
mapping very early in the boot process, so early that it cannot use the
flush_cache_vmap() function which may depend on structures not yet
initialized (for example in riscv, we currently send an IPI to flush
other cpus TLB).
But on some architectures, we must call flush_cache_vmap(): for example,
in riscv, some uarchs can cache invalid TLB entries so we need to flush
the new established mapping to avoid taking an exception.
So fix this by introducing a new function flush_cache_vmap_early() which
is called right after setting the new page table entry and before
accessing this new mapping. This new function implements a local flush
tlb on riscv and is no-op for other architectures (same as today).
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dennis Zhou <dennis@kernel.org>
Stable-dep-of: d9807d60c145 ("riscv: mm: execute local TLB flush after populating vmemmap") Signed-off-by: Sasha Levin <sashal@kernel.org>
This function used to simply flush the whole tlb of all harts, be more
subtile and try to only flush the range.
The problem is that we can only use PAGE_SIZE as stride since we don't know
the size of the underlying mapping and then this function will be improved
only if the size of the region to flush is < threshold * PAGE_SIZE.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC Reviewed-by: Samuel Holland <samuel.holland@sifive.com> Tested-by: Samuel Holland <samuel.holland@sifive.com> Link: https://lore.kernel.org/r/20231030133027.19542-5-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Stable-dep-of: d9807d60c145 ("riscv: mm: execute local TLB flush after populating vmemmap") Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, when the range to flush covers more than one page (a 4K page or
a hugepage), __flush_tlb_range() flushes the whole tlb. Flushing the whole
tlb comes with a greater cost than flushing a single entry so we should
flush single entries up to a certain threshold so that:
threshold * cost of flushing a single entry < cost of flushing the whole
tlb.
Co-developed-by: Mayuresh Chitale <mchitale@ventanamicro.com> Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC Reviewed-by: Samuel Holland <samuel.holland@sifive.com> Tested-by: Samuel Holland <samuel.holland@sifive.com> Link: https://lore.kernel.org/r/20231030133027.19542-4-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Stable-dep-of: d9807d60c145 ("riscv: mm: execute local TLB flush after populating vmemmap") Signed-off-by: Sasha Levin <sashal@kernel.org>
For now, tlb_flush() simply calls flush_tlb_mm() which results in a
flush of the whole TLB. So let's use mmu_gather fields to provide a more
fine-grained flush of the TLB.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Samuel Holland <samuel.holland@sifive.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC Link: https://lore.kernel.org/r/20231030133027.19542-2-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Stable-dep-of: d9807d60c145 ("riscv: mm: execute local TLB flush after populating vmemmap") Signed-off-by: Sasha Levin <sashal@kernel.org>
The issue here is when this is called from ntfs_load_attr_list(). The
"size" comes from le32_to_cpu(attr->res.data_size) so it can't overflow
on a 64bit systems but on 32bit systems the "+ 1023" can overflow and
the result is zero. This means that the kmalloc will succeed by
returning the ZERO_SIZE_PTR and then the memcpy() will crash with an
Oops on the next line.
Fixes: be71b5cba2e6 ("fs/ntfs3: Add attrib operations") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Pipapo needs a scratchpad area to keep state during matching.
This state can be large and thus cannot reside on stack.
Each set preallocates percpu areas for this.
On each match stage, one scratchpad half starts with all-zero and the other
is inited to all-ones.
At the end of each stage, the half that starts with all-ones is
always zero. Before next field is tested, pointers to the two halves
are swapped, i.e. resmap pointer turns into fill pointer and vice versa.
After the last field has been processed, pipapo stashes the
index toggle in a percpu variable, with assumption that next packet
will start with the all-zero half and sets all bits in the other to 1.
This isn't reliable.
There can be multiple sets and we can't be sure that the upper
and lower half of all set scratch map is always in sync (lookups
can be conditional), so one set might have swapped, but other might
not have been queried.
Thus we need to keep the index per-set-and-cpu, just like the
scratchpad.
Note that this bug fix is incomplete, there is a related issue.
avx2 and normal implementation might use slightly different areas of the
map array space due to the avx2 alignment requirements, so
m->scratch (generic/fallback implementation) and ->scratch_aligned
(avx) may partially overlap. scratch and scratch_aligned are not distinct
objects, the latter is just the aligned address of the former.
After this change, write to scratch_align->map_index may write to
scratch->map, so this issue becomes more prominent, we can set to 1
a bit in the supposedly-all-zero area of scratch->map[].
A followup patch will remove the scratch_aligned and makes generic and
avx code use the same (aligned) area.
Its done in a separate change to ease review.
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
'stream_enc_regs' array is an array of dcn10_stream_enc_registers
structures. The array is initialized with four elements, corresponding
to the four calls to stream_enc_regs() in the array initializer. This
means that valid indices for this array are 0, 1, 2, and 3.
The error message 'stream_enc_regs' 4 <= 5 below, is indicating that
there is an attempt to access this array with an index of 5, which is
out of bounds. This could lead to undefined behavior
Here, eng_id is used as an index to access the stream_enc_regs array. If
eng_id is 5, this would result in an out-of-bounds access on the
stream_enc_regs array.
Thus fixing Buffer overflow error in dcn301_stream_encoder_create
reported by Smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn301/dcn301_resource.c:1011 dcn301_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5
Fixes: 3a83e4e64bb1 ("drm/amd/display: Add dcn3.01 support to DC (v2)") Cc: Roman Li <Roman.Li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
'panel_cntl' structure used to control the display panel could be null,
dereferencing it could lead to a null pointer access.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn21/dcn21_hwseq.c:269 dcn21_set_backlight_level() error: we previously assumed 'panel_cntl' could be null (see line 250)
Fixes: 474ac4a875ca ("drm/amd/display: Implement some asic specific abm call backs.") Cc: Yongqiang Sun <yongqiang.sun@amd.com> Cc: Anthony Koo <Anthony.Koo@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
xt_check_{match,target} expects u16, but NFTA_RULE_COMPAT_PROTO is u32.
NLA_POLICY_MAX(NLA_BE32, 65535) cannot be used because .max in
nla_policy is s16, see 3e48be05f3c7 ("netlink: add attribute range
validation to policy").
Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
cmsg_ipv6 test requests tcpdump to capture 4 packets,
and sends until tcpdump quits. Only the first packet
is "real", however, and the rest are basic UDP packets.
So if tcpdump doesn't start in time it will miss
the real packet and only capture the UDP ones.
This makes the test fail on slow machine (no KVM or with
debug enabled) 100% of the time, while it passes in fast
environments.
Repeat the "real" / expected packet.
Fixes: 9657ad09e1fa ("selftests: net: test IPV6_TCLASS") Fixes: 05ae83d5a4a2 ("selftests: net: test IPV6_HOPLIMIT") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
This forms a self-cyclic reference that GC should finally untangle
but does not due to lack of MSG_OOB handling, resulting in memory
leak.
Recently, commit 11498715f266 ("af_unix: Remove io_uring code for
GC.") removed io_uring's dead code in GC and revealed the problem.
The code was executed at the final stage of GC and unconditionally
moved all GC candidates from gc_candidates to gc_inflight_list.
That papered over the reported problem by always making the following
WARN_ON_ONCE(!list_empty(&gc_candidates)) false.
The problem has been there since commit 2aab4b969002 ("af_unix: fix
struct pid leaks in OOB support") added full scm support for MSG_OOB
while fixing another bug.
To fix this problem, we must call kfree_skb() for unix_sk(sk)->oob_skb
if the socket still exists in gc_candidates after purging collected skb.
Then, we need to set NULL to oob_skb before calling kfree_skb() because
it calls last fput() and triggers unix_release_sock(), where we call
duplicate kfree_skb(u->oob_skb) if not NULL.
Note that the leaked socket remained being linked to a global list, so
kmemleak also could not detect it. We need to check /proc/net/protocol
to notice the unfreed socket.
The cause of this issue is that when tipc_nl_bearer_add() is called with
the TIPC_NLA_BEARER_UDP_OPTS attribute, tipc_udp_nl_bearer_add() is called
even if the bearer is not UDP.
tipc_udp_is_known_peer() called by tipc_udp_nl_bearer_add() assumes that
the media_ptr field of the tipc_bearer has an udp_bearer type object, so
the function goes crazy for non-UDP bearers.
This patch fixes the issue by checking the bearer type before calling
tipc_udp_nl_bearer_add() in tipc_nl_bearer_add().
In very slow environments, most big TCP cases including
segmentation and reassembly of big TCP packets have a good
chance to fail: by default the TCP client uses write size
well below 64K. If the host is low enough autocorking is
unable to build real big TCP packets.
Address the issue using much larger write operations.
Note that is hard to observe the issue without an extremely
slow and/or overloaded environment; reduce the TCP transfer
time to allow for much easier/faster reproducibility.
Fixes: 6bb382bcf742 ("selftests: add a selftest for big tcp") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the counting of new acks and nacks when parsing a packet - something
that is used in congestion control.
As the code stands, it merely notes if there are any nacks whereas what we
really should do is compare the previous SACK table to the new one,
assuming we get two successive ACK packets with nacks in them. However, we
really don't want to do that if we can avoid it as the tables might not
correspond directly as one may be shifted from the other - something that
will only get harder to deal with once extended ACK tables come into full
use (with a capacity of up to 8192).
Instead, count the number of nacks shifted out of the old SACK, the number
of nacks retained in the portion still active and the number of new acks
and nacks in the new table then calculate what we need.
Note this ends up a bit of an estimate as the Rx protocol allows acks to be
withdrawn by the receiver and packets requested to be retransmitted.
Fixes: d57a3a151660 ("rxrpc: Save last ACK's SACK table rather than marking txbufs") Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Stop rxrpc from sending a DUP ACK in response to a PING RESPONSE ACK on a
dead call. We may have initiated the ping but the call may have beaten the
response to completion.
Fixes: 18bfeba50dfd ("rxrpc: Perform terminal call ACK/ABORT retransmission from conn processor") Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the construction of delayed ACKs to not set the reference serial number
as they can't be used as an RTT reference.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the Rx protocol, every packet generated is marked with a per-connection
monotonically increasing serial number. This number can be referenced in
an ACK packet generated in response to an incoming packet - thereby
allowing the sender to use this for RTT determination, amongst other
things.
However, if the reference field in the ACK is zero, it doesn't refer to any
incoming packet (it could be a ping to find out if a packet got lost, for
example) - so we shouldn't generate zero serial numbers.
Fix the generation of serial numbers to retry if it comes up with a zero.
Furthermore, since the serial numbers are only ever allocated within the
I/O thread this connection is bound to, there's no need for atomics so
remove that too.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
This code prints the wrong variable in the warning message. It should
print "i" instead of "info->offset". On the first iteration "info" is
uninitialized leading to a crash and on subsequent iterations it prints
the previous offset instead of the current one.
Fixes: e0f74ed4634d ("i915/gvt: Separate the MMIO tracking table from GVT-g") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/11957c20-b178-4027-9b0a-e32e9591dd7c@moroto.mountain Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
inet_recv_error() is called without holding the socket lock.
IPv6 socket could mutate to IPv4 with IPV6_ADDRFORM
socket option and trigger a KCSAN warning.
Fixes: f4713a3dfad0 ("net-timestamp: make tcp_recvmsg call ipv6_recv_error for AF_INET6 socks") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Before commit 7108b80a542b ("hwmon/coretemp: Handle large core ID
value"), there is a fixed mapping between
1. cpu_core_id
2. the index in pdata->core_data[] array
3. the sysfs attr name, aka "tempX_"
The later two always equal cpu_core_id + 2.
After the commit, pdata->core_data[] index is got from ida so that it
can handle sparse core ids and support more cores within a package.
However, the commit erroneously maps the sysfs attr name to
pdata->core_data[] index instead of cpu_core_id + 2.
As a result, the code is not aligned with the comments, and brings user
visible changes in hwmon sysfs on systems with sparse core id.
For example, before commit 7108b80a542b ("hwmon/coretemp: Handle large
core ID value"),
/sys/class/hwmon/hwmon2/temp2_label:Core 0
/sys/class/hwmon/hwmon2/temp3_label:Core 1
/sys/class/hwmon/hwmon2/temp4_label:Core 2
/sys/class/hwmon/hwmon2/temp5_label:Core 3
/sys/class/hwmon/hwmon2/temp6_label:Core 4
/sys/class/hwmon/hwmon3/temp10_label:Core 8
/sys/class/hwmon/hwmon3/temp11_label:Core 9
after commit,
/sys/class/hwmon/hwmon2/temp2_label:Core 0
/sys/class/hwmon/hwmon2/temp3_label:Core 1
/sys/class/hwmon/hwmon2/temp4_label:Core 2
/sys/class/hwmon/hwmon2/temp5_label:Core 3
/sys/class/hwmon/hwmon2/temp6_label:Core 4
/sys/class/hwmon/hwmon2/temp7_label:Core 8
/sys/class/hwmon/hwmon2/temp8_label:Core 9
Restore the previous behavior and rework the code, comments and variable
names to avoid future confusions.
When qmem_alloc and pfvf->hw_ops->sq_aq_init fails, sq->sg should be
freed to prevent memleak.
Fixes: c9c12d339d93 ("octeontx2-pf: Add support for PTP clock") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the ICMPv6 error is built from a non-linear skb we get the following
splat,
BUG: KASAN: slab-out-of-bounds in do_csum+0x220/0x240
Read of size 4 at addr ffff88811d402c80 by task netperf/820
CPU: 0 PID: 820 Comm: netperf Not tainted 6.8.0-rc1+ #543
...
kasan_report+0xd8/0x110
do_csum+0x220/0x240
csum_partial+0xc/0x20
skb_tunnel_check_pmtu+0xeb9/0x3280
vxlan_xmit_one+0x14c2/0x4080
vxlan_xmit+0xf61/0x5c00
dev_hard_start_xmit+0xfb/0x510
__dev_queue_xmit+0x7cd/0x32a0
br_dev_queue_push_xmit+0x39d/0x6a0
Use skb_checksum instead of csum_partial who cannot deal with non-linear
SKBs.
Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets") Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
For XDP_TX action xdp_buff is converted to xdp_frame. The conversion is
done by xdp_convert_buff_to_frame(). The memory type of the resulting
xdp_frame depends on the memory type of the xdp_buff. For page pool
based xdp_buff it produces xdp_frame with memory type
MEM_TYPE_PAGE_POOL. For zero copy XSK pool based xdp_buff it produces
xdp_frame with memory type MEM_TYPE_PAGE_ORDER0.
tsnep_xdp_xmit_back() is not prepared for that and uses always the page
pool buffer type TSNEP_TX_TYPE_XDP_TX. This leads to invalid mappings
and the transmission of undefined data.
Improve tsnep_xdp_xmit_back() to use the generic buffer type
TSNEP_TX_TYPE_XDP_NDO for zero copy XDP_TX.
Fixes: 3fc2333933fd ("tsnep: Add XDP socket zero-copy RX support") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Using hard-coded constant timeout to wait for some expected
event is deemed to fail sooner or later, especially in slow
env.
Our CI has spotted another of such race:
# TEST: ipv6: cleanup of cached exceptions - nexthop objects [FAIL]
# can't delete veth device in a timely manner, PMTU dst likely leaked
Replace the crude sleep with a loop looking for the expected condition
at low interval for a much longer range.
The pmtu.sh test uses a few TCP listener in a problematic way:
It hard-codes a constant timeout to wait for the listener starting-up
in background. That introduces unneeded latency and on very slow and
busy host it can fail.
Additionally the test starts again the same listener in the same
namespace on the same port, just after the previous connection
completed. Fast host can attempt starting the new server before the
old one really closed the socket.
Address the issues using the wait_local_port_listen helper and
explicitly waiting for the background listener process exit.
The patch set [1] added a general lib.sh in net selftests, and converted
several test scripts to source the lib.sh.
unicast_extensions.sh (converted in [1]) and pmtu.sh (converted in [2])
have a /bin/sh shebang which may point to various shells in different
distributions, but "source" is only available in some of them. For
example, "source" is a built-it function in bash, but it cannot be
used in dash.
Refer to other scripts that were converted together, simply change the
shebang to bash to fix the following issues when the default /bin/sh
points to other shells.
not ok 51 selftests: net: unicast_extensions.sh # exit=1
v1 -> v2:
- Fix pmtu.sh which has the same issue as unicast_extensions.sh,
suggested by Hangbin
- Change the style of the "source" line to be consistent with other
tests, suggested by Hangbin
pmtu test use /bin/sh, so we need to source ./lib.sh instead of lib.sh
Here is the test result after conversion.
# ./pmtu.sh
TEST: ipv4: PMTU exceptions [ OK ]
TEST: ipv4: PMTU exceptions - nexthop objects [ OK ]
TEST: ipv6: PMTU exceptions [ OK ]
TEST: ipv6: PMTU exceptions - nexthop objects [ OK ]
...
TEST: ipv4: list and flush cached exceptions - nexthop objects [ OK ]
TEST: ipv6: list and flush cached exceptions [ OK ]
TEST: ipv6: list and flush cached exceptions - nexthop objects [ OK ]
TEST: ipv4: PMTU exception w/route replace [ OK ]
TEST: ipv4: PMTU exception w/route replace - nexthop objects [ OK ]
TEST: ipv6: PMTU exception w/route replace [ OK ]
TEST: ipv6: PMTU exception w/route replace - nexthop objects [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: e71e016ad0f6 ("selftests: net: fix tcp listener handling in pmtu.sh") Signed-off-by: Sasha Levin <sashal@kernel.org>
# ./unicast_extensions.sh
/usr/bin/which: no nettest in (/root/.local/bin:/root/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin)
###########################################################################
Unicast address extensions tests (behavior of reserved IPv4 addresses)
###########################################################################
TEST: assign and ping within 240/4 (1 of 2) (is allowed) [ OK ]
TEST: assign and ping within 240/4 (2 of 2) (is allowed) [ OK ]
TEST: assign and ping within 0/8 (1 of 2) (is allowed) [ OK ]
...
TEST: assign and ping class D address (is forbidden) [ OK ]
TEST: routing using class D (is forbidden) [ OK ]
TEST: routing using 127/8 (is forbidden) [ OK ]
Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: e71e016ad0f6 ("selftests: net: fix tcp listener handling in pmtu.sh") Signed-off-by: Sasha Levin <sashal@kernel.org>
The udpgro_fwd.sh self-tests are somewhat unstable. There are
a few timing constraints the we struggle to meet on very slow
environments.
Instead of skipping the whole tests in such envs, increase the
test resilience WRT very slow hosts: increase the inter-packets
timeouts, avoid resetting the counters every second and finally
disable reduce the background traffic noise.
Tested with:
for I in $(seq 1 100); do
./tools/testing/selftests/kselftest_install/run_kselftest.sh \
-t net:udpgro_fwd.sh || exit -1
done
Function aq_ring_hwts_rx_alloc() maps extra AQ_CFG_RXDS_DEF bytes
for PTP HWTS ring but then generic aq_ring_free() does not take this
into account.
Create and use a specific function to free HWTS ring to fix this
issue.
After commit e3eac9f32ec0 ("wifi: cfg80211: Annotate struct
cfg80211_scan_request with __counted_by"), the compiler may enforce
dynamic array indexing of req->channels to stay below n_channels. As a
result, n_channels needs to be increased _before_ accessing the newly
added array index. Increment it first, then use "i" for the prior index.
Solves this warning in the coming GCC that has __counted_by support:
../drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c: In function 'brcmf_internal_escan_add_info':
../drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:3783:46: warning: operation on 'req->
n_channels' may be undefined [-Wsequence-point]
3783 | req->channels[req->n_channels++] = chan;
| ~~~~~~~~~~~~~~~^~
Fixes: e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by") Cc: Arend van Spriel <aspriel@gmail.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: Chi-hsien Lin <chi-hsien.lin@infineon.com> Cc: Ian Lin <ian.lin@infineon.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Wright Feng <wright.feng@cypress.com> Cc: Hector Martin <marcan@marcan.st> Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list.pdl@broadcom.com Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240126223150.work.548-kees@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently the driver exits eSR by calling
iwl_mvm_esr_mode_inactive() before updating the FW
(by deactivating one of the links), and therefore before
sending the EML frame notifying that we are no longer in eSR.
This is wrong for several reasons:
1. The driver sends SMPS activation frames when we are still in eSR
and SMPS should be disabled when in eSR
2. The driver restores RLC configuration as it was before eSR
entering, and RLC command shouldn't be sent in eSR
Fix this by calling iwl_mvm_esr_mode_inactive() after FW update
Commit 56e58d6c8a56 ("net: stmmac: Implement Safety Features in
XGMAC core") checks and reports safety errors, but leaves the
Data Path Parity Errors for each channel in DMA unhandled at all, lead to
a storm of interrupt.
Fix it by checking and clearing the DMA_DPP_Interrupt_Status register.
Fixes: 56e58d6c8a56 ("net: stmmac: Implement Safety Features in XGMAC core") Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The EFI stub's kernel placement logic randomizes the physical placement
of the kernel by taking all available memory into account, and picking a
region at random, based on a random seed.
When KASLR is disabled, this seed is set to 0x0, and this results in the
lowest available region of memory to be selected for loading the kernel,
even if this is below LOAD_PHYSICAL_ADDR. Some of this memory is
typically reserved for the GFP_DMA region, to accommodate masters that
can only access the first 16 MiB of system memory.
Even if such devices are rare these days, we may still end up with a
warning in the kernel log, as reported by Tom:
The recently introduced EFI memory attributes protocol should be used
if it exists to ensure that the memory allocation created for the kernel
permits execution. This is needed for compatibility with tightened
requirements related to Windows logo certification for x86 PCs.
Currently, we simply strip the execute protect (XP) attribute from the
entire range, but this might be rejected under some firmware security
policies, and so in a subsequent patch, this will be changed to only
strip XP from the executable region that runs early, and make it
read-only (RO) as well.
In order to catch any issues early, ensure that the memory attribute
protocol works as intended, and give up if it produces spurious errors.
Note that the DXE services based fallback was always based on best
effort, so don't propagate any errors returned by that API.
The commit 8b45a26f2ba9 ("drm/msm/dpu: reserve cdm blocks for writeback
in case of YUV output") introduced a smatch warning about another
conditional block in dpu_encoder_helper_phys_cleanup() which had assumed
hw_pp will always be valid which may not necessarily be true.
Lets fix the other conditional block by making sure hw_pp is valid
before dereferencing it.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Fixes: ae4d721ce100 ("drm/msm/dpu: add an API to reset the encoder related hw blocks") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/574878/ Link: https://lore.kernel.org/r/20240117194109.21609-1-quic_abhinavk@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
MSA MISC0 bit 1 to 7 contains Colorimetry Indicator Field.
dp_link_get_colorimetry_config() returns wrong colorimetry value
in the DP_TEST_DYNAMIC_RANGE_CEA case in the current implementation.
Hence fix this problem by having dp_link_get_colorimetry_config()
return defined CEA RGB colorimetry value in the case of
DP_TEST_DYNAMIC_RANGE_CEA.
Changes in V2:
-- drop retrieving colorimetry from colorspace
-- drop dr = link->dp_link.test_video.test_dyn_range assignment
Changes in V3:
-- move defined MISCr0a Colorimetry vale to dp_reg.h
-- rewording commit title
-- rewording commit text to more precise describe this patch
Since the value of DP_TEST_BIT_DEPTH_8 is already left shifted, in the
BPC unknown case, the additional shift causes spill over to the other
bits of the [DP_CONFIGURATION_CTRL] register.
Fix this by changing the return value of dp_link_get_test_bits_depth()
in the BPC unknown case to (DP_TEST_BIT_DEPTH_8 >> DP_TEST_BIT_DEPTH_SHIFT).
Introduce a local boolean variable if FS_XFLAG_REALTIME to make the
checks for it more obvious, and de-densify a few of the conditionals
using it to make them more readable while at it.
Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231025141020.192413-4-hch@lst.de Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com> Acked-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since the introduction of xfs_dqblk in V5, xfs really ought to find the
dqblk pointer from the dquot buffer, then compute the xfs_disk_dquot
pointer from the dqblk pointer. Fix the open-coded xfs_buf_offset calls
and do the type checking in the correct order.
Note that this has made no practical difference since the start of the
xfs_disk_dquot is coincident with the start of the xfs_dqblk.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com> Acked-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Discovered when trying to track down a weird recovery corruption
issue that wasn't detected at recovery time.
The specific corruption was a zero extent count field when big
extent counts are in use, and it turns out the dinode verifier
doesn't detect that specific corruption case, either. So fix it too.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com> Acked-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 57c0f4a8ea3a attempted to fix the select in the kconfig entry
XFS_ONLINE_SCRUB_STATS by selecting XFS_DEBUG, but the original
intention was to select DEBUG_FS, since the feature relies on debugfs to
export the related scrub statistics.
Fixes: 57c0f4a8ea3a ("xfs: fix select in config XFS_ONLINE_SCRUB_STATS") Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Anthony Iliopoulos <ailiop@suse.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com> Acked-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
XFS: Internal error i != 1 at line 3526 of file fs/xfs/libxfs/xfs_btree.c. Caller xfs_btree_insert+0x1ec/0x280
...
Call Trace:
xfs_corruption_error+0x94/0xa0
xfs_btree_insert+0x221/0x280
xfs_alloc_fixup_trees+0x104/0x3e0
xfs_alloc_ag_vextent_size+0x667/0x820
xfs_alloc_fix_freelist+0x5d9/0x750
xfs_free_extent_fix_freelist+0x65/0xa0
__xfs_free_extent+0x57/0x180
...
This is the XFS_IS_CORRUPT() check in xfs_btree_insert() when
xfs_btree_insrec() fails.
After converting this into a panic and dissecting the core dump, I found
that xfs_btree_insrec() is failing because it's trying to split a leaf
node in the cntbt when the AG free list is empty. In particular, it's
failing to get a block from the AGFL _while trying to refill the AGFL_.
If a single operation splits every level of the bnobt and the cntbt (and
the rmapbt if it is enabled) at once, the free list will be empty. Then,
when the next operation tries to refill the free list, it allocates
space. If the allocation does not use a full extent, it will need to
insert records for the remaining space in the bnobt and cntbt. And if
those new records go in full leaves, the leaves (and potentially more
nodes up to the old root) need to be split.
Fix it by accounting for the additional splits that may be required to
refill the free list in the calculation for the minimum free list size.
P.S. As far as I can tell, this bug has existed for a long time -- maybe
back to xfs-history commit afdf80ae7405 ("Add XFS_AG_MAXLEVELS macros
...") in April 1994! It requires a very unlucky sequence of events, and
in fact we didn't hit it until a particular sparse mmap workload updated
from 5.12 to 5.19. But this bug existed in 5.12, so it must've been
exposed by some other change in allocation or writeback patterns. It's
also much less likely to be hit with the rmapbt enabled, since that
increases the minimum free list size and is unlikely to split at the
same time as the bnobt and cntbt.
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com> Acked-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
We flush the data device cache before we issue external log IO. If
the flush fails, we shut down the log immediately and return. However,
the iclog->ic_sema is left in a decremented state so let's add an up().
Prior to this patch, xfs/438 would fail consistently when running with
an external log device:
sync
-> xfs_log_force
-> xlog_write_iclog
-> down(&iclog->ic_sema)
-> blkdev_issue_flush (fail causes us to intiate shutdown)
-> xlog_force_shutdown
-> return
unmount
-> xfs_log_umount
-> xlog_wait_iclog_completion
-> down(&iclog->ic_sema) --------> HANG
There is a second early return / shutdown. Make sure the up() happens
for it as well. Also make sure we cleanup the iclog state,
xlog_state_done_syncing, before dropping the iclog lock.
Fixes: b5d721eaae47 ("xfs: external logs need to flush data device") Fixes: 842a42d126b4 ("xfs: shutdown on failure to add page to log bio") Fixes: 7d839e325af2 ("xfs: check return codes when flushing block devices") Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com> Acked-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
xfs_reflink_end_cow_extent looks up the COW extent and the data fork
extent at offset_fsb, and then proceeds to remap the common subset
between the two.
It does however not limit the remapped extent to the passed in
[*offset_fsbm end_fsb] range and thus potentially remaps more blocks than
the one handled by the current I/O completion. This means that with
sufficiently large data and COW extents we could be remapping COW fork
mappings that have not been written to, leading to a stale data exposure
on a powerfail event.
We use to have a xfs_trim_range to make the remap fit the I/O completion
range, but that got (apparently accidentally) removed in commit df2fd88f8ac7 ("xfs: rewrite xfs_reflink_end_cow to use intents").
Note that I've only found this by code inspection, and a test case would
probably require very specific delay and error injection.
Fixes: df2fd88f8ac7 ("xfs: rewrite xfs_reflink_end_cow to use intents") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com> Acked-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When recovering intents, we capture newly created intent items as part of
committing recovered intent items. If intent recovery fails at a later
point, we forget to remove those newly created intent items from the AIL
and hang:
When newly created intent items fail to commit via transaction, intent
recovery hasn't created done items for these newly created intent items,
so the capture structure is the sole owner of the captured intent items.
We must release them explicitly or else they leak:
Fix the problem above by abort intent items that don't have a done item
when recovery intents fail.
Fixes: e6fff81e4870 ("xfs: proper replay of deferred ops queued during log recovery") Signed-off-by: Long Li <leo.lilong@huawei.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com> Acked-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Factor out xfs_defer_pending_abort() from xfs_defer_trans_abort(), which
not use transaction parameter, so it can be used after the transaction
life cycle.
Signed-off-by: Long Li <leo.lilong@huawei.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com> Acked-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>