In function drm_helper_probe_single_connector_modes() when we enable
polling again, if it is already uninitialized, a warning is reported.
This patch fixes the warning message by checking if poll is initialized
before enabling it.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The changes are similar to those given in the commit 19b070fefd0d
("VMCI: Fix memcpy() run-time warning in dg_dispatch_as_host()").
Fix filling of the msg and msg_payload in dg_info struct, which prevents a
possible "detected field-spanning write" of memcpy warning that is issued
by the tracking mechanism __fortify_memcpy_chk.
mpls_gso_segment() assumes skb_inner_network_header() returns
a valid result:
mpls_hlen = skb_inner_network_header(skb) - skb_network_header(skb);
if (unlikely(!mpls_hlen || mpls_hlen % MPLS_HLEN))
goto out;
if (unlikely(!pskb_may_pull(skb, mpls_hlen)))
With syzbot reproducer, skb_inner_network_header() yields 0,
skb_network_header() returns 108, so this will
"pskb_may_pull(skb, -108)))" which triggers a newly added
DEBUG_NET_WARN_ON_ONCE() check:
First iteration of this patch made mpls_hlen signed and changed
test to error out to "mpls_hlen <= 0 || ..".
Eric Dumazet said:
> I was thinking about adding a debug check in skb_inner_network_header()
> if inner_network_header is zero (that would mean it is not 'set' yet),
> but this would trigger even after your patch.
So add new skb_inner_network_header_was_set() helper and use that.
The syzbot reproducer injects data via packet socket. The skb that gets
allocated and passed down the stack has ->protocol set to NSH (0x894f)
and gso_type set to SKB_GSO_UDP | SKB_GSO_DODGY.
This gets passed to skb_mac_gso_segment(), which sees NSH as ptype to
find a callback for. nsh_gso_segment() retrieves next type:
proto = tun_p_to_eth_p(nsh_hdr(skb)->np);
... which is MPLS (TUN_P_MPLS_UC). It updates skb->protocol and then
calls mpls_gso_segment(). Inner offsets are all 0, so mpls_gso_segment()
ends up with a negative header size.
In case more callers rely on silent handling of such large may_pull values
we could also 'legalize' this behaviour, either replacing the debug check
with (len > INT_MAX) test or removing it and instead adding a comment
before existing
if (unlikely(len > skb->len))
return SKB_DROP_REASON_PKT_TOO_SMALL;
test in pskb_may_pull_reason(), saying that this check also implicitly
takes care of callers that miscompute header sizes.
By default VBDS is set to 0. At boot it is set to clamshell (bit 6 set)
only after method VBDL is executed.
Since VBDL is now evaluated in the probe routine later, after the device
is registered, the retrieved value of VBDS was still 0 ("tablet mode")
when setting up the virtual switch.
Make sure to evaluate VGBS after VBDL, to ensure the
convertible boots in clamshell mode, the expected default.
Fixes: 26173179fae1 ("platform/x86: intel-vbtn: Eval VBDL after registering our notifier") Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240329143206.2977734-3-gwendal@chromium.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add a lock for the ctx_list, to avoid accessing a NULL pointer
within the 'vpu_enc_ipi_handler' function when the ctx_list has
been deleted due to an unexpected behavior on the SCP IP block.
Fixes: 1972e32431ed ("media: mediatek: vcodec: Fix possible invalid memory access for encoder") Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add a lock for the ctx_list, to avoid accessing a NULL pointer
within the 'vpu_dec_ipi_handler' function when the ctx_list has
been deleted due to an unexpected behavior on the SCP IP block.
The stateless HEVC decoder saves the instance pointer in the context
regardless if the initialization worked or not. This caused a use after
free, when the pointer is freed in case of a failure in the deinit
function.
Only store the instance pointer when the initialization was successful,
to solve this issue.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Fixes: 2674486aac7d ("media: mediatek: vcodec: support stateless hevc decoder") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
The .head.text section carries the startup code that runs with the MMU
off or with a translation of memory that deviates from the ordinary one.
So avoid instrumentation with the stackleak plugin, which already avoids
.init.text and .noinstr.text entirely.
Fixes: 48204aba801f1b51 ("x86/sme: Move early SME kernel encryption handling into .head.text") Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202403221630.2692c998-oliver.sang@intel.com Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20240328064256.2358634-2-ardb+git@google.com Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit adds NVME_QUIRK_NO_DEEPEST_PS and NVME_QUIRK_BOGUS_NID for
device [126f:2262], which appears to be a generic VID:PID pair used for
many SSDs based on the Silicon Motion SM2262/SM2262EN controller.
Two of my SSDs with this VID:PID pair exhibit the same behavior:
* They frequently have trouble exiting the deepest power state (5),
resulting in the entire disk unresponsive.
Verified by setting nvme_core.default_ps_max_latency_us=10000 and
observing them behaving normally.
* They produce all-zero nguid and eui64 with `nvme id-ns` command.
The offending products are:
* HP SSD EX950 1TB
* HIKVISION C2000Pro 2TB
Signed-off-by: Jiawei Fu <i@ibugone.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If failure happens before the opcode prep handler is called, ensure that
we clear the opcode specific area of the request, which holds data
specific to that request type. This prevents errors where opcode
handlers either don't get to clear per-request private data since prep
isn't even called.
There are some actions with value 'tmp' but 'dst_addr' is checked instead.
It is obvious that a copy-paste error was made here and the value
of variable 'tmp' should be checked here.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
When running as PVH or HVM Linux will use holes in the memory map as scratch
space to map grants, foreign domain pages and possibly miscellaneous other
stuff. However the usage of such memory map holes for Xen purposes can be
problematic. The request of holesby Xen happen quite early in the kernel boot
process (grant table setup already uses scratch map space), and it's possible
that by then not all devices have reclaimed their MMIO space. It's not
unlikely for chunks of Xen scratch map space to end up using PCI bridge MMIO
window memory, which (as expected) causes quite a lot of issues in the system.
At least for PVH dom0 we have the possibility of using regions marked as
UNUSABLE in the e820 memory map. Either if the region is UNUSABLE in the
native memory map, or it has been converted into UNUSABLE in order to hide RAM
regions from dom0, the second stage translation page-tables can populate those
areas without issues.
PV already has this kind of logic, where the balloon driver is inflated at
boot. Re-use the current logic in order to also inflate it when running as
PVH. onvert UNUSABLE regions up to the ratio specified in EXTRA_MEM_RATIO to
RAM, while reserving them using xen_add_extra_mem() (which is also moved so
it's no longer tied to CONFIG_PV).
[jgross: fixed build for CONFIG_PVH without CONFIG_XEN_PVH]
When pcm_runtime is adding platform components it will scan all
registered components. In case of DPCM FE/BE some DAI links will
configure dummy platform. However both dummy codec and dummy platform
are using "snd-soc-dummy" as component->name. Dummy codec should be
skipped when adding platforms otherwise there'll be overflow and UBSAN
complains.
Reported-by: Zhipeng Wang <zhipeng.wang_1@nxp.com> Signed-off-by: Chancel Liu <chancel.liu@nxp.com> Link: https://msgid.link/r/20240305065606.3778642-1-chancel.liu@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, thermal zones associated with providers that have interrupts
for signaling hot/critical trips are required to set a polling-delay
of 0 to indicate no polling. This feels a bit backwards.
Change the code such that "no polling delay" also means "no polling".
If a DiplayPort cable is directly connected to the host routers USB4
port, there is no tunnel involved but the port is in "redrive" mode
meaning that it is re-driving the DisplayPort signals from its
DisplayPort source. In this case we need to keep the domain powered on
otherwise once the domain enters D3cold the connected monitor blanks
too.
Since this happens only on Intel Barlow Ridge add a quirk that takes
runtime PM reference if we detect that the USB4 port entered redrive
mode (and release it once it exits the mode).
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Between UCSI 1.2 and UCSI 2.0, the size of the MESSAGE_IN region was
increased from 16 to 256. In order to avoid overflowing reads for older
systems, add a mechanism to use the read UCSI version to truncate read
sizes on UCSI v1.2.
If an frame was transmitted incomplete to the host, we set the
UVC_STREAM_ERR bit in the header for the last request that is going
to be queued. This way the host will know that it should drop the
frame instead of trying to display the corrupted content.
The BPF helper bpf_cgroup_from_id() calls kernfs_find_and_get_node_by_id()
which acquires kernfs_idr_lock, which is an non-raw non-IRQ-safe lock. This
can lead to deadlocks as bpf_cgroup_from_id() can be called from any BPF
programs including e.g. the ones that attach to functions which are holding
the scheduler rq lock.
if (cgrp) {
bpf_printk("%d[%s] in %s", p->pid, p->comm, cgrp->kn->name);
bpf_cgroup_release(cgrp);
}
return 0;
}
__set_cpus_allowed_ptr_locked() is called with rq lock held and the above
BPF program calls bpf_cgroup_from_id() within leading to the following
lockdep warning:
=====================================================
WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected 6.7.0-rc3-work-00053-g07124366a1d7-dirty #147 Not tainted
-----------------------------------------------------
repro/1620 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: ffffffff833b3688 (kernfs_idr_lock){+.+.}-{2:2}, at: kernfs_find_and_get_node_by_id+0x1e/0x70
and this task is already holding: ffff888237ced698 (&rq->__lock){-.-.}-{2:2}, at: task_rq_lock+0x4e/0xf0
which would create a new lock dependency:
(&rq->__lock){-.-.}-{2:2} -> (kernfs_idr_lock){+.+.}-{2:2}
...
Possible interrupt unsafe locking scenario:
Let's fix it by protecting kernfs_node and kernfs_root with RCU and making
kernfs_find_and_get_node_by_id() acquire rcu_read_lock() instead of
kernfs_idr_lock.
This adds an rcu_head to kernfs_node making it larger by 16 bytes on 64bit.
Combined with the preceding rearrange patch, the net increase is 8 bytes.
When processing a SYSERR, if the device does not respond to the MHI_RESET
from the host, the host will be stuck in a difficult to recover state.
The host will remain in MHI_PM_SYS_ERR_PROCESS and not clean up the host
channels. Clients will not be notified of the SYSERR via the destruction
of their channel devices, which means clients may think that the device is
still up. Subsequent SYSERR events such as a device fatal error will not
be processed as the state machine cannot transition from PROCESS back to
DETECT. The only way to recover from this is to unload the mhi module
(wipe the state machine state) or for the mhi controller to initiate
SHUTDOWN.
This issue was discovered by stress testing soc_reset events on AIC100
via the sysfs node.
soc_reset is processed entirely in hardware. When the register write
hits the endpoint hardware, it causes the soc to reset without firmware
involvement. In stress testing, there is a rare race where soc_reset N
will cause the soc to reset and PBL to signal SYSERR (fatal error). If
soc_reset N+1 is triggered before PBL can process the MHI_RESET from the
host, then the soc will reset again, and re-run PBL from the beginning.
This will cause PBL to lose all state. PBL will be waiting for the host
to respond to the new syserr, but host will be stuck expecting the
previous MHI_RESET to be processed.
Additionally, the AMSS EE firmware (QSM) was hacked to synthetically
reproduce the issue by simulating a FW hang after the QSM issued a
SYSERR. In this case, soc_reset would not recover the device.
For this failure case, to recover the device, we need a state similar to
PROCESS, but can transition to DETECT. There is not a viable existing
state to use. POR has the needed transitions, but assumes the device is
in a good state and could allow the host to attempt to use the device.
Allowing PROCESS to transition to DETECT invites the possibility of
parallel SYSERR processing which could get the host and device out of
sync.
Thus, invent a new state - MHI_PM_SYS_ERR_FAIL
This essentially a holding state. It allows us to clean up the host
elements that are based on the old state of the device (channels), but
does not allow us to directly advance back to an operational state. It
does allow the detection and processing of another SYSERR which may
recover the device, or allows the controller to do a clean shutdown.
Replace seekdir() with rewinddir() in order to fix a localized glibc bug.
One of the glibc patches that stable Gentoo is using causes an improper
directory stream positioning bug on 32bit arm. That in turn ends up as a
floating point exception in iio_generic_buffer.
The attached patch provides a fix by using an equivalent function which
should not cause trouble for other distros and is easier to reason about
in general as it obviously always goes back to to the start.
In function ring_buffer_iter_empty(), cpu_buffer->commit_page is read
while other threads may change it. It may cause the time_stamp that read
in the next line come from a different page. Use READ_ONCE() to avoid
having to reason about compiler optimizations now and in future.
The test type "make_warnings_file" should have no mandatory configuration
parameters other than the ones required by the "build" test type, because
its purpose is to create a file with build warnings that may or may not be
used by other subsequent tests. Currently, the only way to use it as a
stand-alone test is by setting POWER_CYCLE, CONSOLE, SSH_USER,
BUILD_TARGET, TARGET_IMAGE, REBOOT_TYPE and GRUB_MENU.
The speakers on the Lenovo Yoga 9 14IMH9 are similar to previous generations
such as the 14IAP7, and the bass speakers can be fixed using similar methods
with one caveat: 14IMH9 uses CS35L41 amplifiers which need to be activated
separately.
The Revision Guide for AMD Family 19h Model 10-1Fh processors declares
Erratum 1452 which states that non-branch entries may erroneously be
recorded in the Last Branch Record (LBR) stack with the valid and
spec bits set.
Such entries can be recognized by inspecting bit 61 of the corresponding
LastBranchStackToIp register. This bit is currently reserved but if found
to be set, the associated branch entry should be discarded.
Newer Lenovo Yogas and Legions with 60Hz/90Hz displays send a wmi event
when Fn + R is pressed. This is intended for use to switch between the
two refresh rates.
Allocate a new KEY_REFRESH_RATE_TOGGLE keycode for it.
Instead of manually extracting certain bits from registers with binary
ANDs and shifts, the FIELD_GET macro can be used. With this in mind, the
*_SHIFT macros can be dropped.
Add timeout to cm_destroy_id, so that userspace can trigger any data
collection that would help in analyzing the cause of delay in destroying
the cm_id.
New noinline function helps dtrace/ebpf programs to hook on to it.
Existing functionality isn't changed except triggering a probe-able new
function at every timeout interval.
We have seen cases where CM messages stuck with MAD layer (either due to
software bug or faulty HCA), leading to cm_id getting stuck in the
following call stack. This patch helps in resolving such issues faster.
HiSilicon UC PMU v2 suffers the erratum 162700402 that the PMU counter
cannot be set due to the lack of clock under power saving mode. This will
lead to error or inaccurate counts. The clock can be enabled by the PMU
global enabling control.
This patch tries to fix this by set the UC PMU enable before set event
period to turn on the clock, and then restore the UC PMU configuration.
The counter register can hold its value without a clock.
This reverts commit d52848620de00cde4a3a5df908e231b8c8868250, which was
originally put in place to work around a s2idle failure on this platform
where the NVMe device was inaccessible upon resume.
After extended testing, we found that the firmware's implementation of S3
is buggy and intermittently fails to wake up the system. We need to revert
to s2idle mode.
The NVMe issue has now been solved more precisely in the commit titled
"PCI: Disable D3cold on Asus B1400 PCI-NVMe bridge"
The Asus B1400 with original shipped firmware versions and VMD disabled
cannot resume from suspend: the NVMe device becomes unresponsive and
inaccessible.
This appears to be an untested D3cold transition by the vendor; Intel
socwatch shows that Windows leaves the NVMe device and parent bridge in D0
during suspend, even though these firmware versions have StorageD3Enable=1.
The NVMe device and parent PCI bridge both share the same "PXP" ACPI power
resource, which gets turned off as both devices are put into D3cold during
suspend. The _OFF() method calls DL23() which sets a L23E bit at offset
0xe2 into the PCI configuration space for this root port. This is the
specific write that the _ON() routine is unable to recover from. This
register is not documented in the public chipset datasheet.
Disallow D3cold on the PCI bridge to enable successful suspend/resume.
When the NFS client is under extreme load the rpc_wait_queue.qlen counter
can be overflowed. Here is an instant of the backlog queue overflow in a
real world environment shown by drgn helper:
This ensures that the memory mapped by ioremap for adev->rmmio, is
properly handled in amdgpu_device_init(). If the function exits early
due to an error, the memory is unmapped. If the function completes
successfully, the memory remains mapped.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:4337 amdgpu_device_init() warn: 'adev->rmmio' from ioremap() not released on lines: 4035,4045,4051,4058,4068,4337
Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Internal touchscreen on Trogdor Pompom (AKA Dynabook Chromebook C1)
supports USI stylus. Unfortunately the HID descriptor for the stylus
interface does not contain "Stylus" physical collection, which makes
the kernel to try and pull battery information, resulting in errors.
Apply HID_BATTERY_QUIRK_AVOID_QUERY to the device.
I believe RX FIFO depth define 0 is incorrect on Wangxun 10Gb NIC. It
must be at least 1 since code is able to read received data from the
DW_IC_DATA_CMD register.
For now this define is irrelevant since the txgbe_i2c_dw_xfer_quirk()
doesn't use the rx_fifo_depth member variable of struct dw_i2c_dev but
is needed when converting code into generic polling mode implementation.
There's issue as follows When do IO fault injection test:
Quota error (device dm-3): find_block_dqentry: Quota for id 101 referenced but not present
Quota error (device dm-3): qtree_read_dquot: Can't read quota structure for id 101
Quota error (device dm-3): do_check_range: Getting block 2021161007 out of range 1-186
Quota error (device dm-3): qtree_read_dquot: Can't read quota structure for id 661
Now, ext4_write_dquot()/ext4_acquire_dquot()/ext4_release_dquot() may commit
inconsistent quota data even if process failed. This may lead to filesystem
corruption.
To ensure filesystem consistent when errors=remount-ro there is need to call
ext4_handle_error() to abort journal.
If one group is marked as block bitmap corrupted, its free blocks cannot
be used and its free count is also deducted from the global
sbi->s_freeclusters_counter. User might be confused about the absent
free space because we can't query the information about corrupted block
groups except unreliable error messages in syslog. So add a hint to show
block bitmap corrupted groups in mb_groups.
Update board selection with tables specifying supported I2S
configurations. DMIC/HDAudio board selection require no update as
dmic/hdaudio machine boards are generic and not tied to any specific
codec.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://msgid.link/r/20240220115035.770402-11-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The context-switch-time check for RCU Tasks Trace quiescence expects
current->trc_reader_special.b.need_qs to be zero, and if so, updates
it to TRC_NEED_QS_CHECKED. This is backwards, because if this value
is zero, there is no RCU Tasks Trace grace period in flight, an thus
no need for a quiescent state. Instead, when a grace period starts,
this field is set to TRC_NEED_QS.
This commit therefore changes the check from zero to TRC_NEED_QS.
Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
For the kernels built with CONFIG_RCU_NOCB_CPU_DEFAULT_ALL=y and
CONFIG_RCU_LAZY=y, the following scenarios will trigger WARN_ON_ONCE()
in the rcu_nocb_bypass_lock() and rcu_nocb_wait_contended() functions:
Reproduce this bug with "echo 3 > /proc/sys/vm/drop_caches".
This commit therefore uses rcu_nocb_try_flush_bypass() instead of
rcu_nocb_flush_bypass() in lazy_rcu_shrink_scan(). If the nocb_bypass
queue is being flushed, then rcu_nocb_try_flush_bypass will return
directly.
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
I have a CD copy of the original Tom Clancy's Ghost Recon game from
2001. The disc mounts without error on Windows, but on Linux mounting
fails with the message "isofs_fill_super: get root inode failed". The
error originates in isofs_read_inode, which returns -EIO because de_len
is 0. The superblock on this disc appears to be intentionally corrupt as
a form of copy protection.
When the root inode is unusable, instead of giving up immediately, try
to continue with the Joliet file table. This fixes the Ghost Recon CD
and probably other copy-protected CDs too.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240208022134.451490-1-alexhenrie24@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The call to lpfc_sli4_resume_rpi() in lpfc_rcv_padisc() may return an
unsuccessful status. In such cases, the elsiocb is not issued, the
completion is not called, and thus the elsiocb resource is leaked.
Check return value after calling lpfc_sli4_resume_rpi() and conditionally
release the elsiocb resource.
Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240131185112.149731-3-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot is reporting sleep in atomic context in SysV filesystem [1], for
sb_bread() is called with rw_spinlock held.
A "write_lock(&pointers_lock) => read_lock(&pointers_lock) deadlock" bug
and a "sb_bread() with write_lock(&pointers_lock)" bug were introduced by
"Replace BKL for chain locking with sysvfs-private rwlock" in Linux 2.5.12.
Then, "[PATCH] err1-40: sysvfs locking fix" in Linux 2.6.8 fixed the
former bug by moving pointers_lock lock to the callers, but instead
introduced a "sb_bread() with read_lock(&pointers_lock)" bug (which made
this problem easier to hit).
Al Viro suggested that why not to do like get_branch()/get_block()/
find_shared() in Minix filesystem does. And doing like that is almost a
revert of "[PATCH] err1-40: sysvfs locking fix" except that get_branch()
from with find_shared() is called without write_lock(&pointers_lock).
If the number of provided enum IDs in a variable width config register
description does not match the expected number, the checker uses the
expected number for validating the individual enum IDs.
However, this may cause out-of-bounds accesses on the array holding the
enum IDs, leading to bogus enum_id conflict warnings. Worse, if the bug
is an incorrect bit field description (e.g. accidentally using "12"
instead of "-12" for a reserved field), thousands of warnings may be
printed, overflowing the kernel log buffer.
Fix this by limiting the enum ID check to the number of provided enum
IDs.
While input core can work with input->phys set to NULL userspace might
depend on it, so better fail probing if allocation fails. The system must
be in a pretty bad shape for it to happen anyway.
This happens because, although `prepare_fb` and `cleanup_fb` are
perfectly balanced, we cannot guarantee consistency in the check
plane->state->fb == state->fb. This means that sometimes we can increase
the refcount in `prepare_fb` and don't decrease it in `cleanup_fb`. The
opposite can also be true.
In fact, the struct drm_plane .state shouldn't be accessed directly
but instead, the `drm_atomic_get_new_plane_state()` helper function should
be used. So, we could stick to this check, but using
`drm_atomic_get_new_plane_state()`. But actually, this check is not really
needed. We can increase and decrease the refcount symmetrically without
problems.
This is going to make the code more simple and consistent.
The ATS2851 controller erroneously reports support for the "Read
Encryption Key Length" HCI command. This makes it unable to connect
to any devices, since this command is issued by the kernel during the
connection process in response to an "Encryption Change" HCI event.
Add a new quirk (HCI_QUIRK_BROKEN_ENC_KEY_SIZE) to hint that the command
is unsupported, preventing it from interrupting the connection process.
This is the error log from btmon before this patch:
Since dracut refers to the module info for defining the required
firmware files and btmtk driver doesn't provide the firmware info for
MT7922, the generate initrd misses the firmware, resulting in the
broken Bluetooth.
This patch simply adds the MODULE_FIRMWARE() for the missing entry
for covering that.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1214133 Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If hci_cmd_sync_complete() is triggered and skb is NULL, then
hdev->req_skb is NULL, which will cause this issue.
Reported-and-tested-by: syzbot+830d9e3fa61968246abd@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Many syzbot reports show extreme rtnl pressure, and many of them hint
that smc acquires rtnl in netns creation for no good reason [1]
This patch returns early from smc_pnet_net_init()
if there is no netdevice yet.
I am not even sure why smc_pnet_create_pnetids_list() even exists,
because smc_pnet_netdev_event() is also calling
smc_pnet_add_base_pnetid() when handling NETDEV_UP event.
When initializing over virtchnl, the PF is required to pass a VSI ID to the
VF as part of its capabilities exchange. The VF driver reports this value
back to the PF in a variety of commands. The PF driver validates that this
value matches the value it sent to the VF.
Some hardware families such as the E700 series could use this value when
reading RSS registers or communicating directly with firmware over the
Admin Queue.
However, E800 series hardware does not support any of these interfaces and
the VF's only use for this value is to report it back to the PF. Thus,
there is no requirement that this value be an actual VSI ID value of any
kind.
The PF driver already does not trust that the VF sends it a real VSI ID.
The VSI structure is always looked up from the VF structure. The PF does
validate that the VSI ID provided matches a VSI associated with the VF, but
otherwise does not use the VSI ID for any purpose.
Instead of reporting the VSI number relative to the PF space, report a
fixed value of 1. When communicating with the VF over virtchnl, validate
that the VSI number is returned appropriately.
This avoids leaking information about the firmware of the PF state.
Currently the ice driver only supplies a VF with a single VSI. However, it
appears that virtchnl has some support for allowing multiple VSIs. I did
not attempt to implement this. However, space is left open to allow further
relative indexes if additional VSIs are provided in future feature
development. For this reason, keep the ice_vc_isvalid_vsi_id function in
place to allow extending it for multiple VSIs in the future.
This change will also simplify handling of live migration in a future
series. Since we no longer will provide a real VSI number to the VF, there
will be no need to keep track of this number when migrating to a new host.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The get_parent handler looks up a parent of a given dentry, this can be
either a subvolume or a directory. The search is set up with offset -1
but it's never expected to find such item, as it would break allowed
range of inode number or a root id. This means it's a corruption (ext4
also returns this error code).
Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The unhandled case in btrfs_relocate_sys_chunks() loop is a corruption,
as it could be caused only by two impossible conditions:
- at first the search key is set up to look for a chunk tree item, with
offset -1, this is an inexact search and the key->offset will contain
the correct offset upon a successful search, a valid chunk tree item
cannot have an offset -1
- after first successful search, the found_key corresponds to a chunk
item, the offset is decremented by 1 before the next loop, it's
impossible to find a chunk item there due to alignment and size
constraints
Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If it looks like there's another subframe in the A-MSDU
but the header isn't fully there, we can end up reading
data out of bounds, only to discard later. Make this a
bit more careful and check if the subframe header can
even be present.
A few models require *.pnvm files while we don't declare them via
MODULE_FIRMWARE(). This resulted in the breakage of WiFi on the
system that relies on the information from modinfo (e.g. openSUSE
installer image).
This patch adds those missing MODULE_FIRMWARE() entries for *.pnvm
files.
A common use of type_max() is to find the max for the type of a
variable. Using the pattern type_max(typeof(var)) is needlessly
verbose. Instead, since typeof(type) == type we can just explicitly
call typeof() on the argument to type_max() and type_min(). Add
wrappers for readability.
Offlining a CPU and bringing it back online is a common operation and it
happens frequently during system suspend/resume, where the non-boot CPUs
are hotplugged out during suspend and brought back at resume.
The cpufreq core already tries to make this path as fast as possible as
the changes are only temporary in nature and full cleanup of resources
isn't required in this case. For example the drivers can implement
online()/offline() callbacks to avoid a lot of tear down of resources.
On similar lines, there is no need to unregister the cpufreq cooling
device during suspend / resume, but only while the policy is getting
removed.
Moreover, unregistering the cpufreq cooling device is resulting in an
unwanted outcome, where the system suspend is eventually aborted in the
process. Currently, during system suspend the cpufreq core unregisters
the cooling device, which in turn removes a kobject using device_del()
and that generates a notification to the userspace via uevent broadcast.
This causes system suspend to abort in some setups.
This was also earlier reported (indirectly) by Roman [1]. Maybe there is
another way around to fixing that problem properly, but this change
makes sense anyways.
Move the registering and unregistering of the cooling device to policy
creation and removal times onlyy.
Currently buf_len field of ath11k_mhi_config_qca6390 is assigned
with 0, making MHI use a default size, 64KB, to allocate channel
buffers. This is likely to fail in some scenarios where system
memory is highly fragmented and memory compaction or reclaim is
not allowed.
Actually those buffers are used only by QMI target -> host communication.
And for WCN6855 and QCA6390, the largest packet size for that is less
than 6KB. So change buf_len field to 8KB, which results in order 1
allocation if page size is 4KB. In this way, we can at least save some
memory, and as well as decrease the possibility of allocation failure
in those scenarios.
On TDX it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
DMA could free decrypted/shared pages if dma_set_decrypted() fails. This
should be a rare case. Just leak the pages in this case instead of
freeing them.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
In particular the xpcs_soft_reset() and xpcs_do_config() functions
currently return -1 if invalid auto-negotiation mode is specified. That
value might be then passed to the generic kernel subsystems which require
a standard kernel errno value. Even though the erroneous conditions are
very specific (memory corruption or buggy driver implementation) using a
hard-coded -1 literal doesn't seem correct anyway especially when it comes
to passing it higher to the network subsystem or printing to the system
log. Convert the hard-coded error values to -EINVAL then.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In function get_pkg_num() if fopen_or_die() succeeds it returns a file
pointer to be used. But fclose() is never called before returning from
the function.
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
Some recent(ish) Dell AIO devices have a backlight controller board
connected to an UART.
This UART has a DELL0501 HID with CID set to PNP0501 so that the UART is
still handled by 8250_pnp.c. Unfortunately there is no separate ACPI device
with an UartSerialBusV2() resource to model the backlight-controller.
The next patch in this series will use acpi_quirk_skip_serdev_enumeration()
to still create a serdev for this for a backlight driver to bind to
instead of creating a /dev/ttyS0.
This new acpi_quirk_skip_serdev_enumeration() use is not limited to Android
X86 tablets, so move it out of the ifdef CONFIG_X86_ANDROID_TABLETS block.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Sicne the mapping is global, mapped register access needs to be protected
against concurrent access, otherwise a race condition might cause the reads
or writes to go towards the wrong register
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ACEPC W5 Pro HDMI stick contains quite generic names in the sys_vendor
and product_name DMI strings, without this patch brcmfmac will try to load:
"brcmfmac43455-sdio.$(DEFAULT_STRING)-$(DEFAULT_STRING).txt" as nvram file
which is both too generic and messy with the $ symbols in the name.
The ACEPC W5 Pro uses the same Ampak AP6255 module as the ACEPC T8
and the nvram for the T8 is already in linux-firmware, so point the new
DMI nvram filename quirk to the T8 nvram file.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240216213649.251718-1-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The kfree() function was called in one case by
the get_filename() function during error handling
even if the passed variable contained a null pointer.
This issue was detected by using the Coccinelle software.
Thus return directly after a call of the function “kzalloc” failed
at the beginning.
syzbot managed to trigger following splat:
BUG: KASAN: use-after-free in __skb_flow_dissect+0x4a3b/0x5e50
Read of size 1 at addr ffff888208a4000e by task a.out/2313
[..]
__skb_flow_dissect+0x4a3b/0x5e50
__skb_get_hash+0xb4/0x400
ip_tunnel_xmit+0x77e/0x26f0
ipip_tunnel_xmit+0x298/0x410
..
Analysis shows that the skb has a valid ->head, but bogus ->data
pointer.
skb->data gets its bogus value via the neigh layer, which does:
1556 __skb_pull(skb, skb_network_offset(skb));
... and the skb was already dodgy at this point:
skb_network_offset(skb) returns a negative value due to an
earlier overflow of skb->network_header (u16). __skb_pull thus
"adjusts" skb->data by a huge offset, pointing outside skb->head
area.
Allow debug builds to splat when we try to pull/push more than
INT_MAX bytes.
After this, the syzkaller reproducer yields a more precise splat
before the flow dissector attempts to read off skb->data memory:
We claim to have the AdminQ on our irq0 and thus cpu id 0,
but we need to be sure we set the affinity hint to try to
keep it there.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to i.MX8MP RM and HDMI ADD, the fdcc clock is part of
hdmi rx verification IP that should not enable for HDMI TX.
But actually if the clock is disabled before HDMI/LCDIF probe,
LCDIF will not get pixel clock from HDMI PHY and print the error
logs:
[CRTC:39:crtc-2] vblank wait timed out
WARNING: CPU: 2 PID: 9 at drivers/gpu/drm/drm_atomic_helper.c:1634 drm_atomic_helper_wait_for_vblanks.part.0+0x23c/0x260
Add fdcc clock to LCDIF and HDMI TX power domains to fix the issue.
Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Sandor Yu <Sandor.yu@nxp.com> Link: https://lore.kernel.org/r/20240203165307.7806-5-aford173@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
projects / linux-stable / log