git.itanic.dy.fi Git - linux-stable/blob - drivers/gpu/drm/gma500/gma_display.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright © 2006-2011 Intel Corporation
   4  *
   5  * Authors:
   6  *      Eric Anholt <eric@anholt.net>
   7  *      Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
   8  */
   9
  10 #include <linux/delay.h>
  11 #include <linux/highmem.h>
  12
  13 #include <drm/drm_crtc.h>
  14 #include <drm/drm_fourcc.h>
  15 #include <drm/drm_vblank.h>
  16
  17 #include "framebuffer.h"
  18 #include "gem.h"
  19 #include "gma_display.h"
  20 #include "psb_irq.h"
  21 #include "psb_intel_drv.h"
  22 #include "psb_intel_reg.h"
  23
  24 /*
  25  * Returns whether any output on the specified pipe is of the specified type
  26  */
  27 bool gma_pipe_has_type(struct drm_crtc *crtc, int type)
  28 {
  29         struct drm_device *dev = crtc->dev;
  30         struct drm_connector_list_iter conn_iter;
  31         struct drm_connector *connector;
  32
  33         drm_connector_list_iter_begin(dev, &conn_iter);
  34         drm_for_each_connector_iter(connector, &conn_iter) {
  35                 if (connector->encoder && connector->encoder->crtc == crtc) {
  36                         struct gma_encoder *gma_encoder =
  37                                                 gma_attached_encoder(connector);
  38                         if (gma_encoder->type == type) {
  39                                 drm_connector_list_iter_end(&conn_iter);
  40                                 return true;
  41                         }
  42                 }
  43         }
  44         drm_connector_list_iter_end(&conn_iter);
  45
  46         return false;
  47 }
  48
  49 void gma_wait_for_vblank(struct drm_device *dev)
  50 {
  51         /* Wait for 20ms, i.e. one cycle at 50hz. */
  52         mdelay(20);
  53 }
  54
  55 int gma_pipe_set_base(struct drm_crtc *crtc, int x, int y,
  56                       struct drm_framebuffer *old_fb)
  57 {
  58         struct drm_device *dev = crtc->dev;
  59         struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
  60         struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
  61         struct drm_framebuffer *fb = crtc->primary->fb;
  62         struct psb_gem_object *pobj;
  63         int pipe = gma_crtc->pipe;
  64         const struct psb_offset *map = &dev_priv->regmap[pipe];
  65         unsigned long start, offset;
  66         u32 dspcntr;
  67         int ret = 0;
  68
  69         if (!gma_power_begin(dev, true))
  70                 return 0;
  71
  72         /* no fb bound */
  73         if (!fb) {
  74                 dev_err(dev->dev, "No FB bound\n");
  75                 goto gma_pipe_cleaner;
  76         }
  77
  78         pobj = to_psb_gem_object(fb->obj[0]);
  79
  80         /* We are displaying this buffer, make sure it is actually loaded
  81            into the GTT */
  82         ret = psb_gem_pin(pobj);
  83         if (ret < 0)
  84                 goto gma_pipe_set_base_exit;
  85         start = pobj->offset;
  86         offset = y * fb->pitches[0] + x * fb->format->cpp[0];
  87
  88         REG_WRITE(map->stride, fb->pitches[0]);
  89
  90         dspcntr = REG_READ(map->cntr);
  91         dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
  92
  93         switch (fb->format->cpp[0] * 8) {
  94         case 8:
  95                 dspcntr |= DISPPLANE_8BPP;
  96                 break;
  97         case 16:
  98                 if (fb->format->depth == 15)
  99                         dspcntr |= DISPPLANE_15_16BPP;
 100                 else
 101                         dspcntr |= DISPPLANE_16BPP;
 102                 break;
 103         case 24:
 104         case 32:
 105                 dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
 106                 break;
 107         default:
 108                 dev_err(dev->dev, "Unknown color depth\n");
 109                 ret = -EINVAL;
 110                 goto gma_pipe_set_base_exit;
 111         }
 112         REG_WRITE(map->cntr, dspcntr);
 113
 114         dev_dbg(dev->dev,
 115                 "Writing base %08lX %08lX %d %d\n", start, offset, x, y);
 116
 117         /* FIXME: Investigate whether this really is the base for psb and why
 118                   the linear offset is named base for the other chips. map->surf
 119                   should be the base and map->linoff the offset for all chips */
 120         if (IS_PSB(dev)) {
 121                 REG_WRITE(map->base, offset + start);
 122                 REG_READ(map->base);
 123         } else {
 124                 REG_WRITE(map->base, offset);
 125                 REG_READ(map->base);
 126                 REG_WRITE(map->surf, start);
 127                 REG_READ(map->surf);
 128         }
 129
 130 gma_pipe_cleaner:
 131         /* If there was a previous display we can now unpin it */
 132         if (old_fb)
 133                 psb_gem_unpin(to_psb_gem_object(old_fb->obj[0]));
 134
 135 gma_pipe_set_base_exit:
 136         gma_power_end(dev);
 137         return ret;
 138 }
 139
 140 /* Loads the palette/gamma unit for the CRTC with the prepared values */
 141 void gma_crtc_load_lut(struct drm_crtc *crtc)
 142 {
 143         struct drm_device *dev = crtc->dev;
 144         struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
 145         struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
 146         const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe];
 147         int palreg = map->palette;
 148         u16 *r, *g, *b;
 149         int i;
 150
 151         /* The clocks have to be on to load the palette. */
 152         if (!crtc->enabled)
 153                 return;
 154
 155         r = crtc->gamma_store;
 156         g = r + crtc->gamma_size;
 157         b = g + crtc->gamma_size;
 158
 159         if (gma_power_begin(dev, false)) {
 160                 for (i = 0; i < 256; i++) {
 161                         REG_WRITE(palreg + 4 * i,
 162                                   (((*r++ >> 8) + gma_crtc->lut_adj[i]) << 16) |
 163                                   (((*g++ >> 8) + gma_crtc->lut_adj[i]) << 8) |
 164                                   ((*b++ >> 8) + gma_crtc->lut_adj[i]));
 165                 }
 166                 gma_power_end(dev);
 167         } else {
 168                 for (i = 0; i < 256; i++) {
 169                         /* FIXME: Why pipe[0] and not pipe[..._crtc->pipe]? */
 170                         dev_priv->regs.pipe[0].palette[i] =
 171                                 (((*r++ >> 8) + gma_crtc->lut_adj[i]) << 16) |
 172                                 (((*g++ >> 8) + gma_crtc->lut_adj[i]) << 8) |
 173                                 ((*b++ >> 8) + gma_crtc->lut_adj[i]);
 174                 }
 175
 176         }
 177 }
 178
 179 static int gma_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
 180                               u16 *blue, u32 size,
 181                               struct drm_modeset_acquire_ctx *ctx)
 182 {
 183         gma_crtc_load_lut(crtc);
 184
 185         return 0;
 186 }
 187
 188 /*
 189  * Sets the power management mode of the pipe and plane.
 190  *
 191  * This code should probably grow support for turning the cursor off and back
 192  * on appropriately at the same time as we're turning the pipe off/on.
 193  */
 194 void gma_crtc_dpms(struct drm_crtc *crtc, int mode)
 195 {
 196         struct drm_device *dev = crtc->dev;
 197         struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
 198         struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
 199         int pipe = gma_crtc->pipe;
 200         const struct psb_offset *map = &dev_priv->regmap[pipe];
 201         u32 temp;
 202
 203         /* XXX: When our outputs are all unaware of DPMS modes other than off
 204          * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
 205          */
 206
 207         if (IS_CDV(dev))
 208                 dev_priv->ops->disable_sr(dev);
 209
 210         switch (mode) {
 211         case DRM_MODE_DPMS_ON:
 212         case DRM_MODE_DPMS_STANDBY:
 213         case DRM_MODE_DPMS_SUSPEND:
 214                 if (gma_crtc->active)
 215                         break;
 216
 217                 gma_crtc->active = true;
 218
 219                 /* Enable the DPLL */
 220                 temp = REG_READ(map->dpll);
 221                 if ((temp & DPLL_VCO_ENABLE) == 0) {
 222                         REG_WRITE(map->dpll, temp);
 223                         REG_READ(map->dpll);
 224                         /* Wait for the clocks to stabilize. */
 225                         udelay(150);
 226                         REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE);
 227                         REG_READ(map->dpll);
 228                         /* Wait for the clocks to stabilize. */
 229                         udelay(150);
 230                         REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE);
 231                         REG_READ(map->dpll);
 232                         /* Wait for the clocks to stabilize. */
 233                         udelay(150);
 234                 }
 235
 236                 /* Enable the plane */
 237                 temp = REG_READ(map->cntr);
 238                 if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
 239                         REG_WRITE(map->cntr,
 240                                   temp | DISPLAY_PLANE_ENABLE);
 241                         /* Flush the plane changes */
 242                         REG_WRITE(map->base, REG_READ(map->base));
 243                 }
 244
 245                 udelay(150);
 246
 247                 /* Enable the pipe */
 248                 temp = REG_READ(map->conf);
 249                 if ((temp & PIPEACONF_ENABLE) == 0)
 250                         REG_WRITE(map->conf, temp | PIPEACONF_ENABLE);
 251
 252                 temp = REG_READ(map->status);
 253                 temp &= ~(0xFFFF);
 254                 temp |= PIPE_FIFO_UNDERRUN;
 255                 REG_WRITE(map->status, temp);
 256                 REG_READ(map->status);
 257
 258                 gma_crtc_load_lut(crtc);
 259
 260                 /* Give the overlay scaler a chance to enable
 261                  * if it's on this pipe */
 262                 /* psb_intel_crtc_dpms_video(crtc, true); TODO */
 263
 264                 drm_crtc_vblank_on(crtc);
 265                 break;
 266         case DRM_MODE_DPMS_OFF:
 267                 if (!gma_crtc->active)
 268                         break;
 269
 270                 gma_crtc->active = false;
 271
 272                 /* Give the overlay scaler a chance to disable
 273                  * if it's on this pipe */
 274                 /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
 275
 276                 /* Disable the VGA plane that we never use */
 277                 REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
 278
 279                 /* Turn off vblank interrupts */
 280                 drm_crtc_vblank_off(crtc);
 281
 282                 /* Wait for vblank for the disable to take effect */
 283                 gma_wait_for_vblank(dev);
 284
 285                 /* Disable plane */
 286                 temp = REG_READ(map->cntr);
 287                 if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
 288                         REG_WRITE(map->cntr,
 289                                   temp & ~DISPLAY_PLANE_ENABLE);
 290                         /* Flush the plane changes */
 291                         REG_WRITE(map->base, REG_READ(map->base));
 292                         REG_READ(map->base);
 293                 }
 294
 295                 /* Disable pipe */
 296                 temp = REG_READ(map->conf);
 297                 if ((temp & PIPEACONF_ENABLE) != 0) {
 298                         REG_WRITE(map->conf, temp & ~PIPEACONF_ENABLE);
 299                         REG_READ(map->conf);
 300                 }
 301
 302                 /* Wait for vblank for the disable to take effect. */
 303                 gma_wait_for_vblank(dev);
 304
 305                 udelay(150);
 306
 307                 /* Disable DPLL */
 308                 temp = REG_READ(map->dpll);
 309                 if ((temp & DPLL_VCO_ENABLE) != 0) {
 310                         REG_WRITE(map->dpll, temp & ~DPLL_VCO_ENABLE);
 311                         REG_READ(map->dpll);
 312                 }
 313
 314                 /* Wait for the clocks to turn off. */
 315                 udelay(150);
 316                 break;
 317         }
 318
 319         if (IS_CDV(dev))
 320                 dev_priv->ops->update_wm(dev, crtc);
 321
 322         /* Set FIFO watermarks */
 323         REG_WRITE(DSPARB, 0x3F3E);
 324 }
 325
 326 static int gma_crtc_cursor_set(struct drm_crtc *crtc,
 327                                struct drm_file *file_priv, uint32_t handle,
 328                                uint32_t width, uint32_t height)
 329 {
 330         struct drm_device *dev = crtc->dev;
 331         struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
 332         struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
 333         int pipe = gma_crtc->pipe;
 334         uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
 335         uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
 336         uint32_t temp;
 337         size_t addr = 0;
 338         struct psb_gem_object *pobj;
 339         struct psb_gem_object *cursor_pobj = gma_crtc->cursor_pobj;
 340         struct drm_gem_object *obj;
 341         void *tmp_dst;
 342         int ret = 0, i, cursor_pages;
 343
 344         /* If we didn't get a handle then turn the cursor off */
 345         if (!handle) {
 346                 temp = CURSOR_MODE_DISABLE;
 347                 if (gma_power_begin(dev, false)) {
 348                         REG_WRITE(control, temp);
 349                         REG_WRITE(base, 0);
 350                         gma_power_end(dev);
 351                 }
 352
 353                 /* Unpin the old GEM object */
 354                 if (gma_crtc->cursor_obj) {
 355                         pobj = to_psb_gem_object(gma_crtc->cursor_obj);
 356                         psb_gem_unpin(pobj);
 357                         drm_gem_object_put(gma_crtc->cursor_obj);
 358                         gma_crtc->cursor_obj = NULL;
 359                 }
 360                 return 0;
 361         }
 362
 363         /* Currently we only support 64x64 cursors */
 364         if (width != 64 || height != 64) {
 365                 dev_dbg(dev->dev, "We currently only support 64x64 cursors\n");
 366                 return -EINVAL;
 367         }
 368
 369         obj = drm_gem_object_lookup(file_priv, handle);
 370         if (!obj) {
 371                 ret = -ENOENT;
 372                 goto unlock;
 373         }
 374
 375         if (obj->size < width * height * 4) {
 376                 dev_dbg(dev->dev, "Buffer is too small\n");
 377                 ret = -ENOMEM;
 378                 goto unref_cursor;
 379         }
 380
 381         pobj = to_psb_gem_object(obj);
 382
 383         /* Pin the memory into the GTT */
 384         ret = psb_gem_pin(pobj);
 385         if (ret) {
 386                 dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle);
 387                 goto unref_cursor;
 388         }
 389
 390         if (dev_priv->ops->cursor_needs_phys) {
 391                 if (!cursor_pobj) {
 392                         dev_err(dev->dev, "No hardware cursor mem available");
 393                         ret = -ENOMEM;
 394                         goto unref_cursor;
 395                 }
 396
 397                 cursor_pages = obj->size / PAGE_SIZE;
 398                 if (cursor_pages > 4)
 399                         cursor_pages = 4; /* Prevent overflow */
 400
 401                 /* Copy the cursor to cursor mem */
 402                 tmp_dst = dev_priv->vram_addr + cursor_pobj->offset;
 403                 for (i = 0; i < cursor_pages; i++) {
 404                         memcpy_from_page(tmp_dst, pobj->pages[i], 0, PAGE_SIZE);
 405                         tmp_dst += PAGE_SIZE;
 406                 }
 407
 408                 addr = gma_crtc->cursor_addr;
 409         } else {
 410                 addr = pobj->offset;
 411                 gma_crtc->cursor_addr = addr;
 412         }
 413
 414         temp = 0;
 415         /* set the pipe for the cursor */
 416         temp |= (pipe << 28);
 417         temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
 418
 419         if (gma_power_begin(dev, false)) {
 420                 REG_WRITE(control, temp);
 421                 REG_WRITE(base, addr);
 422                 gma_power_end(dev);
 423         }
 424
 425         /* unpin the old bo */
 426         if (gma_crtc->cursor_obj) {
 427                 pobj = to_psb_gem_object(gma_crtc->cursor_obj);
 428                 psb_gem_unpin(pobj);
 429                 drm_gem_object_put(gma_crtc->cursor_obj);
 430         }
 431
 432         gma_crtc->cursor_obj = obj;
 433 unlock:
 434         return ret;
 435
 436 unref_cursor:
 437         drm_gem_object_put(obj);
 438         return ret;
 439 }
 440
 441 static int gma_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
 442 {
 443         struct drm_device *dev = crtc->dev;
 444         struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
 445         int pipe = gma_crtc->pipe;
 446         uint32_t temp = 0;
 447         uint32_t addr;
 448
 449         if (x < 0) {
 450                 temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT);
 451                 x = -x;
 452         }
 453         if (y < 0) {
 454                 temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT);
 455                 y = -y;
 456         }
 457
 458         temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT);
 459         temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
 460
 461         addr = gma_crtc->cursor_addr;
 462
 463         if (gma_power_begin(dev, false)) {
 464                 REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp);
 465                 REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, addr);
 466                 gma_power_end(dev);
 467         }
 468         return 0;
 469 }
 470
 471 void gma_crtc_prepare(struct drm_crtc *crtc)
 472 {
 473         const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 474         crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
 475 }
 476
 477 void gma_crtc_commit(struct drm_crtc *crtc)
 478 {
 479         const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 480         crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
 481 }
 482
 483 void gma_crtc_disable(struct drm_crtc *crtc)
 484 {
 485         struct psb_gem_object *pobj;
 486         const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 487
 488         crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
 489
 490         if (crtc->primary->fb) {
 491                 pobj = to_psb_gem_object(crtc->primary->fb->obj[0]);
 492                 psb_gem_unpin(pobj);
 493         }
 494 }
 495
 496 void gma_crtc_destroy(struct drm_crtc *crtc)
 497 {
 498         struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
 499
 500         if (gma_crtc->cursor_pobj)
 501                 drm_gem_object_put(&gma_crtc->cursor_pobj->base);
 502
 503         kfree(gma_crtc->crtc_state);
 504         drm_crtc_cleanup(crtc);
 505         kfree(gma_crtc);
 506 }
 507
 508 int gma_crtc_page_flip(struct drm_crtc *crtc,
 509                        struct drm_framebuffer *fb,
 510                        struct drm_pending_vblank_event *event,
 511                        uint32_t page_flip_flags,
 512                        struct drm_modeset_acquire_ctx *ctx)
 513 {
 514         struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
 515         struct drm_framebuffer *current_fb = crtc->primary->fb;
 516         struct drm_framebuffer *old_fb = crtc->primary->old_fb;
 517         const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 518         struct drm_device *dev = crtc->dev;
 519         unsigned long flags;
 520         int ret;
 521
 522         if (!crtc_funcs->mode_set_base)
 523                 return -EINVAL;
 524
 525         /* Using mode_set_base requires the new fb to be set already. */
 526         crtc->primary->fb = fb;
 527
 528         if (event) {
 529                 spin_lock_irqsave(&dev->event_lock, flags);
 530
 531                 WARN_ON(drm_crtc_vblank_get(crtc) != 0);
 532
 533                 gma_crtc->page_flip_event = event;
 534                 spin_unlock_irqrestore(&dev->event_lock, flags);
 535
 536                 /* Call this locked if we want an event at vblank interrupt. */
 537                 ret = crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, old_fb);
 538                 if (ret) {
 539                         spin_lock_irqsave(&dev->event_lock, flags);
 540                         if (gma_crtc->page_flip_event) {
 541                                 gma_crtc->page_flip_event = NULL;
 542                                 drm_crtc_vblank_put(crtc);
 543                         }
 544                         spin_unlock_irqrestore(&dev->event_lock, flags);
 545                 }
 546         } else {
 547                 ret = crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, old_fb);
 548         }
 549
 550         /* Restore previous fb in case of failure. */
 551         if (ret)
 552                 crtc->primary->fb = current_fb;
 553
 554         return ret;
 555 }
 556
 557 int gma_crtc_set_config(struct drm_mode_set *set,
 558                         struct drm_modeset_acquire_ctx *ctx)
 559 {
 560         struct drm_device *dev = set->crtc->dev;
 561         struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
 562         int ret;
 563
 564         if (!dev_priv->rpm_enabled)
 565                 return drm_crtc_helper_set_config(set, ctx);
 566
 567         pm_runtime_forbid(dev->dev);
 568         ret = drm_crtc_helper_set_config(set, ctx);
 569         pm_runtime_allow(dev->dev);
 570
 571         return ret;
 572 }
 573
 574 const struct drm_crtc_funcs gma_crtc_funcs = {
 575         .cursor_set = gma_crtc_cursor_set,
 576         .cursor_move = gma_crtc_cursor_move,
 577         .gamma_set = gma_crtc_gamma_set,
 578         .set_config = gma_crtc_set_config,
 579         .destroy = gma_crtc_destroy,
 580         .page_flip = gma_crtc_page_flip,
 581         .enable_vblank = gma_crtc_enable_vblank,
 582         .disable_vblank = gma_crtc_disable_vblank,
 583         .get_vblank_counter = gma_crtc_get_vblank_counter,
 584 };
 585
 586 /*
 587  * Save HW states of given crtc
 588  */
 589 void gma_crtc_save(struct drm_crtc *crtc)
 590 {
 591         struct drm_device *dev = crtc->dev;
 592         struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
 593         struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
 594         struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state;
 595         const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe];
 596         uint32_t palette_reg;
 597         int i;
 598
 599         if (!crtc_state) {
 600                 dev_err(dev->dev, "No CRTC state found\n");
 601                 return;
 602         }
 603
 604         crtc_state->saveDSPCNTR = REG_READ(map->cntr);
 605         crtc_state->savePIPECONF = REG_READ(map->conf);
 606         crtc_state->savePIPESRC = REG_READ(map->src);
 607         crtc_state->saveFP0 = REG_READ(map->fp0);
 608         crtc_state->saveFP1 = REG_READ(map->fp1);
 609         crtc_state->saveDPLL = REG_READ(map->dpll);
 610         crtc_state->saveHTOTAL = REG_READ(map->htotal);
 611         crtc_state->saveHBLANK = REG_READ(map->hblank);
 612         crtc_state->saveHSYNC = REG_READ(map->hsync);
 613         crtc_state->saveVTOTAL = REG_READ(map->vtotal);
 614         crtc_state->saveVBLANK = REG_READ(map->vblank);
 615         crtc_state->saveVSYNC = REG_READ(map->vsync);
 616         crtc_state->saveDSPSTRIDE = REG_READ(map->stride);
 617
 618         /* NOTE: DSPSIZE DSPPOS only for psb */
 619         crtc_state->saveDSPSIZE = REG_READ(map->size);
 620         crtc_state->saveDSPPOS = REG_READ(map->pos);
 621
 622         crtc_state->saveDSPBASE = REG_READ(map->base);
 623
 624         palette_reg = map->palette;
 625         for (i = 0; i < 256; ++i)
 626                 crtc_state->savePalette[i] = REG_READ(palette_reg + (i << 2));
 627 }
 628
 629 /*
 630  * Restore HW states of given crtc
 631  */
 632 void gma_crtc_restore(struct drm_crtc *crtc)
 633 {
 634         struct drm_device *dev = crtc->dev;
 635         struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
 636         struct gma_crtc *gma_crtc =  to_gma_crtc(crtc);
 637         struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state;
 638         const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe];
 639         uint32_t palette_reg;
 640         int i;
 641
 642         if (!crtc_state) {
 643                 dev_err(dev->dev, "No crtc state\n");
 644                 return;
 645         }
 646
 647         if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) {
 648                 REG_WRITE(map->dpll,
 649                         crtc_state->saveDPLL & ~DPLL_VCO_ENABLE);
 650                 REG_READ(map->dpll);
 651                 udelay(150);
 652         }
 653
 654         REG_WRITE(map->fp0, crtc_state->saveFP0);
 655         REG_READ(map->fp0);
 656
 657         REG_WRITE(map->fp1, crtc_state->saveFP1);
 658         REG_READ(map->fp1);
 659
 660         REG_WRITE(map->dpll, crtc_state->saveDPLL);
 661         REG_READ(map->dpll);
 662         udelay(150);
 663
 664         REG_WRITE(map->htotal, crtc_state->saveHTOTAL);
 665         REG_WRITE(map->hblank, crtc_state->saveHBLANK);
 666         REG_WRITE(map->hsync, crtc_state->saveHSYNC);
 667         REG_WRITE(map->vtotal, crtc_state->saveVTOTAL);
 668         REG_WRITE(map->vblank, crtc_state->saveVBLANK);
 669         REG_WRITE(map->vsync, crtc_state->saveVSYNC);
 670         REG_WRITE(map->stride, crtc_state->saveDSPSTRIDE);
 671
 672         REG_WRITE(map->size, crtc_state->saveDSPSIZE);
 673         REG_WRITE(map->pos, crtc_state->saveDSPPOS);
 674
 675         REG_WRITE(map->src, crtc_state->savePIPESRC);
 676         REG_WRITE(map->base, crtc_state->saveDSPBASE);
 677         REG_WRITE(map->conf, crtc_state->savePIPECONF);
 678
 679         gma_wait_for_vblank(dev);
 680
 681         REG_WRITE(map->cntr, crtc_state->saveDSPCNTR);
 682         REG_WRITE(map->base, crtc_state->saveDSPBASE);
 683
 684         gma_wait_for_vblank(dev);
 685
 686         palette_reg = map->palette;
 687         for (i = 0; i < 256; ++i)
 688                 REG_WRITE(palette_reg + (i << 2), crtc_state->savePalette[i]);
 689 }
 690
 691 void gma_encoder_prepare(struct drm_encoder *encoder)
 692 {
 693         const struct drm_encoder_helper_funcs *encoder_funcs =
 694             encoder->helper_private;
 695         /* lvds has its own version of prepare see psb_intel_lvds_prepare */
 696         encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
 697 }
 698
 699 void gma_encoder_commit(struct drm_encoder *encoder)
 700 {
 701         const struct drm_encoder_helper_funcs *encoder_funcs =
 702             encoder->helper_private;
 703         /* lvds has its own version of commit see psb_intel_lvds_commit */
 704         encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
 705 }
 706
 707 void gma_encoder_destroy(struct drm_encoder *encoder)
 708 {
 709         struct gma_encoder *intel_encoder = to_gma_encoder(encoder);
 710
 711         drm_encoder_cleanup(encoder);
 712         kfree(intel_encoder);
 713 }
 714
 715 /* Currently there is only a 1:1 mapping of encoders and connectors */
 716 struct drm_encoder *gma_best_encoder(struct drm_connector *connector)
 717 {
 718         struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
 719
 720         return &gma_encoder->base;
 721 }
 722
 723 void gma_connector_attach_encoder(struct gma_connector *connector,
 724                                   struct gma_encoder *encoder)
 725 {
 726         connector->encoder = encoder;
 727         drm_connector_attach_encoder(&connector->base,
 728                                           &encoder->base);
 729 }
 730
 731 #define GMA_PLL_INVALID(s) { /* DRM_ERROR(s); */ return false; }
 732
 733 bool gma_pll_is_valid(struct drm_crtc *crtc,
 734                       const struct gma_limit_t *limit,
 735                       struct gma_clock_t *clock)
 736 {
 737         if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
 738                 GMA_PLL_INVALID("p1 out of range");
 739         if (clock->p < limit->p.min || limit->p.max < clock->p)
 740                 GMA_PLL_INVALID("p out of range");
 741         if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
 742                 GMA_PLL_INVALID("m2 out of range");
 743         if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
 744                 GMA_PLL_INVALID("m1 out of range");
 745         /* On CDV m1 is always 0 */
 746         if (clock->m1 <= clock->m2 && clock->m1 != 0)
 747                 GMA_PLL_INVALID("m1 <= m2 && m1 != 0");
 748         if (clock->m < limit->m.min || limit->m.max < clock->m)
 749                 GMA_PLL_INVALID("m out of range");
 750         if (clock->n < limit->n.min || limit->n.max < clock->n)
 751                 GMA_PLL_INVALID("n out of range");
 752         if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
 753                 GMA_PLL_INVALID("vco out of range");
 754         /* XXX: We may need to be checking "Dot clock"
 755          * depending on the multiplier, connector, etc.,
 756          * rather than just a single range.
 757          */
 758         if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
 759                 GMA_PLL_INVALID("dot out of range");
 760
 761         return true;
 762 }
 763
 764 bool gma_find_best_pll(const struct gma_limit_t *limit,
 765                        struct drm_crtc *crtc, int target, int refclk,
 766                        struct gma_clock_t *best_clock)
 767 {
 768         struct drm_device *dev = crtc->dev;
 769         const struct gma_clock_funcs *clock_funcs =
 770                                                 to_gma_crtc(crtc)->clock_funcs;
 771         struct gma_clock_t clock;
 772         int err = target;
 773
 774         if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
 775             (REG_READ(LVDS) & LVDS_PORT_EN) != 0) {
 776                 /*
 777                  * For LVDS, if the panel is on, just rely on its current
 778                  * settings for dual-channel.  We haven't figured out how to
 779                  * reliably set up different single/dual channel state, if we
 780                  * even can.
 781                  */
 782                 if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
 783                     LVDS_CLKB_POWER_UP)
 784                         clock.p2 = limit->p2.p2_fast;
 785                 else
 786                         clock.p2 = limit->p2.p2_slow;
 787         } else {
 788                 if (target < limit->p2.dot_limit)
 789                         clock.p2 = limit->p2.p2_slow;
 790                 else
 791                         clock.p2 = limit->p2.p2_fast;
 792         }
 793
 794         memset(best_clock, 0, sizeof(*best_clock));
 795
 796         /* m1 is always 0 on CDV so the outmost loop will run just once */
 797         for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
 798                 for (clock.m2 = limit->m2.min;
 799                      (clock.m2 < clock.m1 || clock.m1 == 0) &&
 800                       clock.m2 <= limit->m2.max; clock.m2++) {
 801                         for (clock.n = limit->n.min;
 802                              clock.n <= limit->n.max; clock.n++) {
 803                                 for (clock.p1 = limit->p1.min;
 804                                      clock.p1 <= limit->p1.max;
 805                                      clock.p1++) {
 806                                         int this_err;
 807
 808                                         clock_funcs->clock(refclk, &clock);
 809
 810                                         if (!clock_funcs->pll_is_valid(crtc,
 811                                                                 limit, &clock))
 812                                                 continue;
 813
 814                                         this_err = abs(clock.dot - target);
 815                                         if (this_err < err) {
 816                                                 *best_clock = clock;
 817                                                 err = this_err;
 818                                         }
 819                                 }
 820                         }
 821                 }
 822         }
 823
 824         return err != target;
 825 }