ARM: dts: BCM5301X: Specify PWM in the DT

The BCM53016 in the Meraki MR32 uses the on-chip PWM
controller to drive a tri-color RGB LED. Since I plan
to use the PWM, I made a label for the pwm's pinmux
node. This way, it can be easily referenced.... And
Also included a label for the i2c since I'm going to
need it in the future too.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 2d9b4dd058307e7f1c5c44bae5e4f2e75d5ea6c3..45cd8c7411dd5c28f8e8de46a19b8f3c2f2305c1 100644 (file)
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -350,6 +350,14 @@ gmac3: ethernet@27000 {
                };
        };
 
+       pwm: pwm@18002000 {
+               compatible = "brcm,iproc-pwm";
+               reg = <0x18002000 0x28>;
+               clocks = <&osc>;
+               #pwm-cells = <3>;
+               status = "disabled";
+       };
+
        mdio: mdio@18003000 {
                compatible = "brcm,iproc-mdio";
                reg = <0x18003000 0x8>;
@@ -417,12 +425,12 @@ spi-pins {
                                        function = "spi";
                                };
 
-                               i2c {
+                               pinmux_i2c: i2c {
                                        groups = "i2c_grp";
                                        function = "i2c";
                                };
 
-                               pwm {
+                               pinmux_pwm: pwm {
                                        groups = "pwm0_grp", "pwm1_grp",
                                                 "pwm2_grp", "pwm3_grp";
                                        function = "pwm";