net: dp83822: disable rx error interrupt

commit 0e597e2affb90d6ea48df6890d882924acf71e19 upstream.

Some RX errors, notably when disconnecting the cable, increase the RCSR
register. Once half full (0x7fff), an interrupt flood is generated. I
measured ~3k/s interrupts even after the RX errors transfer was
stopped.

Since we don't read and clear the RCSR register, we should disable this
interrupt.

Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index cc1522550f2c47b6c99cef2039ee03b8212d36f6..da3983352dd44117bdfb7a8b53df687daa0b503d 100644 (file)
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -197,8 +197,7 @@ static int dp83822_config_intr(struct phy_device *phydev)
                if (misr_status < 0)
                        return misr_status;
 
-               misr_status |= (DP83822_RX_ERR_HF_INT_EN |
-                               DP83822_ANEG_COMPLETE_INT_EN |
+               misr_status |= (DP83822_ANEG_COMPLETE_INT_EN |
                                DP83822_DUP_MODE_CHANGE_INT_EN |
                                DP83822_SPEED_CHANGED_INT_EN |
                                DP83822_LINK_STAT_INT_EN |