make dtbs_check:
arch/arm/boot/dts/renesas/r8a7779-marzen.dtb: /: keyboard-gpio: {'compatible': ['gpio-keys-polled'], 'poll-interval': [[50]], 'pinctrl-0': [[29]], 'pinctrl-names': ['default'], 'key-3': {'gpios': [[28, 19, 1]], 'linux,code': [[4]], 'label': ['SW1-3'], 'debounce-interval': [[20]]}, 'key-4': {'gpios': [[28, 20, 1]], 'linux,code': [[5]], 'label': ['SW1-4'], 'debounce-interval': [[20]]}} is not of type 'array'
from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#
arch/arm/boot/dts/renesas/r8a7779-marzen.dtb: pinctrl@
fffc0000: keyboard-gpio: {'pins': ['GP_0_19', 'GP_0_20'], 'bias-pull-up': True, 'phandle': [[29]]} is not of type 'array'
from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#
Node names ending in "-gpio" confuse the checker.
Fix this by renaming the keyboards to "keypad-0" and "keypad-1", as they
are not full keyboards.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/eec1ccfb75c6215428609fdcaf3a37c75fe1fc87.1698228163.git.geert+renesas@glider.be
states = <3300000 1>, <1800000 0>;
};
- keyboard-irq {
+ keypad-0 {
compatible = "gpio-keys";
- pinctrl-0 = <&keyboard_irq_pins>;
+ pinctrl-0 = <&keypad0_pins>;
pinctrl-names = "default";
interrupt-parent = <&gpio0>;
};
};
- keyboard-gpio {
+ keypad-1 {
compatible = "gpio-keys-polled";
poll-interval = <50>;
- pinctrl-0 = <&keyboard_gpio_pins>;
+ pinctrl-0 = <&keypad1_pins>;
pinctrl-names = "default";
key-3 {
};
&gpio0 {
- keyboard-irq-hog {
+ keypad0-hog {
gpio-hog;
gpios = <17 GPIO_ACTIVE_LOW>, <18 GPIO_ACTIVE_LOW>;
input;
function = "hspi0";
};
- keyboard_irq_pins: keyboard-irq {
+ keypad0_pins: keypad-0 {
pins = "GP_0_17", "GP_0_18";
bias-pull-up;
};
- keyboard_gpio_pins: keyboard-gpio {
+ keypad1_pins: keypad-1 {
pins = "GP_0_19", "GP_0_20";
bias-pull-up;
};