dev_addr_lists.sh \
mode-1-recovery-updelay.sh \
mode-2-recovery-updelay.sh \
- option_prio.sh \
+ bond_options.sh \
bond-eth-type-change.sh
TEST_FILES := \
lag_lib.sh \
+ bond_topo_3d1c.sh \
net_forwarding_lib.sh
include ../../../lib.mk
--- /dev/null
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test bonding options with mode 1,5,6
+
+ALL_TESTS="
+ prio
+"
+
+REQUIRE_MZ=no
+NUM_NETIFS=0
+lib_dir=$(dirname "$0")
+source ${lib_dir}/net_forwarding_lib.sh
+source ${lib_dir}/bond_topo_3d1c.sh
+
+skip_prio()
+{
+ local skip=1
+
+ # check if iproute support prio option
+ ip -n ${s_ns} link set eth0 type bond_slave prio 10
+ [[ $? -ne 0 ]] && skip=0
+
+ # check if kernel support prio option
+ ip -n ${s_ns} -d link show eth0 | grep -q "prio 10"
+ [[ $? -ne 0 ]] && skip=0
+
+ return $skip
+}
+
+skip_ns()
+{
+ local skip=1
+
+ # check if iproute support ns_ip6_target option
+ ip -n ${s_ns} link add bond1 type bond ns_ip6_target ${g_ip6}
+ [[ $? -ne 0 ]] && skip=0
+
+ # check if kernel support ns_ip6_target option
+ ip -n ${s_ns} -d link show bond1 | grep -q "ns_ip6_target ${g_ip6}"
+ [[ $? -ne 0 ]] && skip=0
+
+ ip -n ${s_ns} link del bond1
+
+ return $skip
+}
+
+active_slave=""
+check_active_slave()
+{
+ local target_active_slave=$1
+ active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave")
+ test "$active_slave" = "$target_active_slave"
+ check_err $? "Current active slave is $active_slave but not $target_active_slave"
+}
+
+
+# Test bonding prio option
+prio_test()
+{
+ local param="$1"
+ RET=0
+
+ # create bond
+ bond_reset "${param}"
+
+ # check bonding member prio value
+ ip -n ${s_ns} link set eth0 type bond_slave prio 0
+ ip -n ${s_ns} link set eth1 type bond_slave prio 10
+ ip -n ${s_ns} link set eth2 type bond_slave prio 11
+ cmd_jq "ip -n ${s_ns} -d -j link show eth0" \
+ ".[].linkinfo.info_slave_data | select (.prio == 0)" "-e" &> /dev/null
+ check_err $? "eth0 prio is not 0"
+ cmd_jq "ip -n ${s_ns} -d -j link show eth1" \
+ ".[].linkinfo.info_slave_data | select (.prio == 10)" "-e" &> /dev/null
+ check_err $? "eth1 prio is not 10"
+ cmd_jq "ip -n ${s_ns} -d -j link show eth2" \
+ ".[].linkinfo.info_slave_data | select (.prio == 11)" "-e" &> /dev/null
+ check_err $? "eth2 prio is not 11"
+
+ bond_check_connection "setup"
+
+ # active slave should be the primary slave
+ check_active_slave eth1
+
+ # active slave should be the higher prio slave
+ ip -n ${s_ns} link set $active_slave down
+ bond_check_connection "fail over"
+ check_active_slave eth2
+
+ # when only 1 slave is up
+ ip -n ${s_ns} link set $active_slave down
+ bond_check_connection "only 1 slave up"
+ check_active_slave eth0
+
+ # when a higher prio slave change to up
+ ip -n ${s_ns} link set eth2 up
+ bond_check_connection "higher prio slave up"
+ case $primary_reselect in
+ "0")
+ check_active_slave "eth2"
+ ;;
+ "1")
+ check_active_slave "eth0"
+ ;;
+ "2")
+ check_active_slave "eth0"
+ ;;
+ esac
+ local pre_active_slave=$active_slave
+
+ # when the primary slave change to up
+ ip -n ${s_ns} link set eth1 up
+ bond_check_connection "primary slave up"
+ case $primary_reselect in
+ "0")
+ check_active_slave "eth1"
+ ;;
+ "1")
+ check_active_slave "$pre_active_slave"
+ ;;
+ "2")
+ check_active_slave "$pre_active_slave"
+ ip -n ${s_ns} link set $active_slave down
+ bond_check_connection "pre_active slave down"
+ check_active_slave "eth1"
+ ;;
+ esac
+
+ # Test changing bond slave prio
+ if [[ "$primary_reselect" == "0" ]];then
+ ip -n ${s_ns} link set eth0 type bond_slave prio 1000000
+ ip -n ${s_ns} link set eth1 type bond_slave prio 0
+ ip -n ${s_ns} link set eth2 type bond_slave prio -50
+ ip -n ${s_ns} -d link show eth0 | grep -q 'prio 1000000'
+ check_err $? "eth0 prio is not 1000000"
+ ip -n ${s_ns} -d link show eth1 | grep -q 'prio 0'
+ check_err $? "eth1 prio is not 0"
+ ip -n ${s_ns} -d link show eth2 | grep -q 'prio -50'
+ check_err $? "eth3 prio is not -50"
+ check_active_slave "eth1"
+
+ ip -n ${s_ns} link set $active_slave down
+ bond_check_connection "change slave prio"
+ check_active_slave "eth0"
+ fi
+}
+
+prio_miimon()
+{
+ local primary_reselect
+ local mode=$1
+
+ for primary_reselect in 0 1 2; do
+ prio_test "mode $mode miimon 100 primary eth1 primary_reselect $primary_reselect"
+ log_test "prio" "$mode miimon primary_reselect $primary_reselect"
+ done
+}
+
+prio_arp()
+{
+ local primary_reselect
+ local mode=$1
+
+ for primary_reselect in 0 1 2; do
+ prio_test "mode active-backup arp_interval 100 arp_ip_target ${g_ip4} primary eth1 primary_reselect $primary_reselect"
+ log_test "prio" "$mode arp_ip_target primary_reselect $primary_reselect"
+ done
+}
+
+prio_ns()
+{
+ local primary_reselect
+ local mode=$1
+
+ if skip_ns; then
+ log_test_skip "prio ns" "Current iproute or kernel doesn't support bond option 'ns_ip6_target'."
+ return 0
+ fi
+
+ for primary_reselect in 0 1 2; do
+ prio_test "mode active-backup arp_interval 100 ns_ip6_target ${g_ip6} primary eth1 primary_reselect $primary_reselect"
+ log_test "prio" "$mode ns_ip6_target primary_reselect $primary_reselect"
+ done
+}
+
+prio()
+{
+ local mode modes="active-backup balance-tlb balance-alb"
+
+ if skip_prio; then
+ log_test_skip "prio" "Current iproute or kernel doesn't support bond option 'prio'."
+ return 0
+ fi
+
+ for mode in $modes; do
+ prio_miimon $mode
+ prio_arp $mode
+ prio_ns $mode
+ done
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
--- /dev/null
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Topology for Bond mode 1,5,6 testing
+#
+# +-------------------------------------+
+# | bond0 |
+# | + | Server
+# | eth0 | eth1 eth2 | 192.0.2.1/24
+# | +-------------------+ | 2001:db8::1/24
+# | | | | |
+# +-------------------------------------+
+# | | |
+# +-------------------------------------+
+# | | | | |
+# | +---+---------+---------+---+ | Gateway
+# | | br0 | | 192.0.2.254/24
+# | +-------------+-------------+ | 2001:db8::254/24
+# | | |
+# +-------------------------------------+
+# |
+# +-------------------------------------+
+# | | | Client
+# | + | 192.0.2.10/24
+# | eth0 | 2001:db8::10/24
+# +-------------------------------------+
+
+s_ns="s-$(mktemp -u XXXXXX)"
+c_ns="c-$(mktemp -u XXXXXX)"
+g_ns="g-$(mktemp -u XXXXXX)"
+s_ip4="192.0.2.1"
+c_ip4="192.0.2.10"
+g_ip4="192.0.2.254"
+s_ip6="2001:db8::1"
+c_ip6="2001:db8::10"
+g_ip6="2001:db8::254"
+
+gateway_create()
+{
+ ip netns add ${g_ns}
+ ip -n ${g_ns} link add br0 type bridge
+ ip -n ${g_ns} link set br0 up
+ ip -n ${g_ns} addr add ${g_ip4}/24 dev br0
+ ip -n ${g_ns} addr add ${g_ip6}/24 dev br0
+}
+
+gateway_destroy()
+{
+ ip -n ${g_ns} link del br0
+ ip netns del ${g_ns}
+}
+
+server_create()
+{
+ ip netns add ${s_ns}
+ ip -n ${s_ns} link add bond0 type bond mode active-backup miimon 100
+
+ for i in $(seq 0 2); do
+ ip -n ${s_ns} link add eth${i} type veth peer name s${i} netns ${g_ns}
+
+ ip -n ${g_ns} link set s${i} up
+ ip -n ${g_ns} link set s${i} master br0
+ ip -n ${s_ns} link set eth${i} master bond0
+ done
+
+ ip -n ${s_ns} link set bond0 up
+ ip -n ${s_ns} addr add ${s_ip4}/24 dev bond0
+ ip -n ${s_ns} addr add ${s_ip6}/24 dev bond0
+ sleep 2
+}
+
+# Reset bond with new mode and options
+bond_reset()
+{
+ local param="$1"
+
+ ip -n ${s_ns} link set bond0 down
+ ip -n ${s_ns} link del bond0
+
+ ip -n ${s_ns} link add bond0 type bond $param
+ for i in $(seq 0 2); do
+ ip -n ${s_ns} link set eth$i master bond0
+ done
+
+ ip -n ${s_ns} link set bond0 up
+ ip -n ${s_ns} addr add ${s_ip4}/24 dev bond0
+ ip -n ${s_ns} addr add ${s_ip6}/24 dev bond0
+ sleep 2
+}
+
+server_destroy()
+{
+ for i in $(seq 0 2); do
+ ip -n ${s_ns} link del eth${i}
+ done
+ ip netns del ${s_ns}
+}
+
+client_create()
+{
+ ip netns add ${c_ns}
+ ip -n ${c_ns} link add eth0 type veth peer name c0 netns ${g_ns}
+
+ ip -n ${g_ns} link set c0 up
+ ip -n ${g_ns} link set c0 master br0
+
+ ip -n ${c_ns} link set eth0 up
+ ip -n ${c_ns} addr add ${c_ip4}/24 dev eth0
+ ip -n ${c_ns} addr add ${c_ip6}/24 dev eth0
+}
+
+client_destroy()
+{
+ ip -n ${c_ns} link del eth0
+ ip netns del ${c_ns}
+}
+
+setup_prepare()
+{
+ gateway_create
+ server_create
+ client_create
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ client_destroy
+ server_destroy
+ gateway_destroy
+}
+
+bond_check_connection()
+{
+ local msg=${1:-"check connection"}
+
+ sleep 2
+ ip netns exec ${s_ns} ping ${c_ip4} -c5 -i 0.1 &>/dev/null
+ check_err $? "${msg}: ping failed"
+ ip netns exec ${s_ns} ping6 ${c_ip6} -c5 -i 0.1 &>/dev/null
+ check_err $? "${msg}: ping6 failed"
+}
+++ /dev/null
-#!/bin/bash
-# SPDX-License-Identifier: GPL-2.0
-#
-# Test bonding option prio
-#
-
-ALL_TESTS="
- prio_arp_ip_target_test
- prio_miimon_test
-"
-
-REQUIRE_MZ=no
-REQUIRE_JQ=no
-NUM_NETIFS=0
-lib_dir=$(dirname "$0")
-source "$lib_dir"/net_forwarding_lib.sh
-
-destroy()
-{
- ip link del bond0 &>/dev/null
- ip link del br0 &>/dev/null
- ip link del veth0 &>/dev/null
- ip link del veth1 &>/dev/null
- ip link del veth2 &>/dev/null
- ip netns del ns1 &>/dev/null
- ip link del veth3 &>/dev/null
-}
-
-cleanup()
-{
- pre_cleanup
-
- destroy
-}
-
-skip()
-{
- local skip=1
- ip link add name bond0 type bond mode 1 miimon 100 &>/dev/null
- ip link add name veth0 type veth peer name veth0_p
- ip link set veth0 master bond0
-
- # check if iproute support prio option
- ip link set dev veth0 type bond_slave prio 10
- [[ $? -ne 0 ]] && skip=0
-
- # check if bonding support prio option
- ip -d link show veth0 | grep -q "prio 10"
- [[ $? -ne 0 ]] && skip=0
-
- ip link del bond0 &>/dev/null
- ip link del veth0
-
- return $skip
-}
-
-active_slave=""
-check_active_slave()
-{
- local target_active_slave=$1
- active_slave="$(cat /sys/class/net/bond0/bonding/active_slave)"
- test "$active_slave" = "$target_active_slave"
- check_err $? "Current active slave is $active_slave but not $target_active_slave"
-}
-
-
-# Test bonding prio option with mode=$mode monitor=$monitor
-# and primary_reselect=$primary_reselect
-prio_test()
-{
- RET=0
-
- local monitor=$1
- local mode=$2
- local primary_reselect=$3
-
- local bond_ip4="192.169.1.2"
- local peer_ip4="192.169.1.1"
- local bond_ip6="2009:0a:0b::02"
- local peer_ip6="2009:0a:0b::01"
-
-
- # create veths
- ip link add name veth0 type veth peer name veth0_p
- ip link add name veth1 type veth peer name veth1_p
- ip link add name veth2 type veth peer name veth2_p
-
- # create bond
- if [[ "$monitor" == "miimon" ]];then
- ip link add name bond0 type bond mode $mode miimon 100 primary veth1 primary_reselect $primary_reselect
- elif [[ "$monitor" == "arp_ip_target" ]];then
- ip link add name bond0 type bond mode $mode arp_interval 1000 arp_ip_target $peer_ip4 primary veth1 primary_reselect $primary_reselect
- elif [[ "$monitor" == "ns_ip6_target" ]];then
- ip link add name bond0 type bond mode $mode arp_interval 1000 ns_ip6_target $peer_ip6 primary veth1 primary_reselect $primary_reselect
- fi
- ip link set bond0 up
- ip link set veth0 master bond0
- ip link set veth1 master bond0
- ip link set veth2 master bond0
- # check bonding member prio value
- ip link set dev veth0 type bond_slave prio 0
- ip link set dev veth1 type bond_slave prio 10
- ip link set dev veth2 type bond_slave prio 11
- ip -d link show veth0 | grep -q 'prio 0'
- check_err $? "veth0 prio is not 0"
- ip -d link show veth1 | grep -q 'prio 10'
- check_err $? "veth0 prio is not 10"
- ip -d link show veth2 | grep -q 'prio 11'
- check_err $? "veth0 prio is not 11"
-
- ip link set veth0 up
- ip link set veth1 up
- ip link set veth2 up
- ip link set veth0_p up
- ip link set veth1_p up
- ip link set veth2_p up
-
- # prepare ping target
- ip link add name br0 type bridge
- ip link set br0 up
- ip link set veth0_p master br0
- ip link set veth1_p master br0
- ip link set veth2_p master br0
- ip link add name veth3 type veth peer name veth3_p
- ip netns add ns1
- ip link set veth3_p master br0 up
- ip link set veth3 netns ns1 up
- ip netns exec ns1 ip addr add $peer_ip4/24 dev veth3
- ip netns exec ns1 ip addr add $peer_ip6/64 dev veth3
- ip addr add $bond_ip4/24 dev bond0
- ip addr add $bond_ip6/64 dev bond0
- sleep 5
-
- ping $peer_ip4 -c5 -I bond0 &>/dev/null
- check_err $? "ping failed 1."
- ping6 $peer_ip6 -c5 -I bond0 &>/dev/null
- check_err $? "ping6 failed 1."
-
- # active salve should be the primary slave
- check_active_slave veth1
-
- # active slave should be the higher prio slave
- ip link set $active_slave down
- ping $peer_ip4 -c5 -I bond0 &>/dev/null
- check_err $? "ping failed 2."
- check_active_slave veth2
-
- # when only 1 slave is up
- ip link set $active_slave down
- ping $peer_ip4 -c5 -I bond0 &>/dev/null
- check_err $? "ping failed 3."
- check_active_slave veth0
-
- # when a higher prio slave change to up
- ip link set veth2 up
- ping $peer_ip4 -c5 -I bond0 &>/dev/null
- check_err $? "ping failed 4."
- case $primary_reselect in
- "0")
- check_active_slave "veth2"
- ;;
- "1")
- check_active_slave "veth0"
- ;;
- "2")
- check_active_slave "veth0"
- ;;
- esac
- local pre_active_slave=$active_slave
-
- # when the primary slave change to up
- ip link set veth1 up
- ping $peer_ip4 -c5 -I bond0 &>/dev/null
- check_err $? "ping failed 5."
- case $primary_reselect in
- "0")
- check_active_slave "veth1"
- ;;
- "1")
- check_active_slave "$pre_active_slave"
- ;;
- "2")
- check_active_slave "$pre_active_slave"
- ip link set $active_slave down
- ping $peer_ip4 -c5 -I bond0 &>/dev/null
- check_err $? "ping failed 6."
- check_active_slave "veth1"
- ;;
- esac
-
- # Test changing bond salve prio
- if [[ "$primary_reselect" == "0" ]];then
- ip link set dev veth0 type bond_slave prio 1000000
- ip link set dev veth1 type bond_slave prio 0
- ip link set dev veth2 type bond_slave prio -50
- ip -d link show veth0 | grep -q 'prio 1000000'
- check_err $? "veth0 prio is not 1000000"
- ip -d link show veth1 | grep -q 'prio 0'
- check_err $? "veth1 prio is not 0"
- ip -d link show veth2 | grep -q 'prio -50'
- check_err $? "veth3 prio is not -50"
- check_active_slave "veth1"
-
- ip link set $active_slave down
- ping $peer_ip4 -c5 -I bond0 &>/dev/null
- check_err $? "ping failed 7."
- check_active_slave "veth0"
- fi
-
- cleanup
-
- log_test "prio_test" "Test bonding option 'prio' with mode=$mode monitor=$monitor and primary_reselect=$primary_reselect"
-}
-
-prio_miimon_test()
-{
- local mode
- local primary_reselect
-
- for mode in 1 5 6; do
- for primary_reselect in 0 1 2; do
- prio_test "miimon" $mode $primary_reselect
- done
- done
-}
-
-prio_arp_ip_target_test()
-{
- local primary_reselect
-
- for primary_reselect in 0 1 2; do
- prio_test "arp_ip_target" 1 $primary_reselect
- done
-}
-
-if skip;then
- log_test_skip "option_prio.sh" "Current iproute doesn't support 'prio'."
- exit 0
-fi
-
-trap cleanup EXIT
-
-tests_run
-
-exit "$EXIT_STATUS"
projects / linux-stable / commitdiff