can: kvaser_pciefd: Do not send EFLUSH command on TFD interrupt

commit 262d7a52ba27525e3c1203230c9f0524e48bbb34 upstream.

Under certain circumstances we send two EFLUSH commands, resulting in two
EFLUSH ack packets, while only expecting a single EFLUSH ack.
This can cause the driver Tx flush completion to get out of sync.

To avoid this problem, don't enable the "Transmit buffer flush done" (TFD)
interrupt and remove the code handling it.
Now we only send EFLUSH command after receiving status packet with
"Init detected" (IDET) bit set.

Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-6-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c
index 4a0894a69b5ff8978094f0f99d42ce76ee92408a..d7b1a7e9c7d642db86b6fd7ad90e8622304db2ef 100644 (file)
--- a/drivers/net/can/kvaser_pciefd.c
+++ b/drivers/net/can/kvaser_pciefd.c
@@ -531,7 +531,7 @@ static int kvaser_pciefd_set_tx_irq(struct kvaser_pciefd_can *can)
              KVASER_PCIEFD_KCAN_IRQ_TOF | KVASER_PCIEFD_KCAN_IRQ_ABD |
              KVASER_PCIEFD_KCAN_IRQ_TAE | KVASER_PCIEFD_KCAN_IRQ_TAL |
              KVASER_PCIEFD_KCAN_IRQ_FDIC | KVASER_PCIEFD_KCAN_IRQ_BPP |
-             KVASER_PCIEFD_KCAN_IRQ_TAR | KVASER_PCIEFD_KCAN_IRQ_TFD;
+             KVASER_PCIEFD_KCAN_IRQ_TAR;
 
        iowrite32(msk, can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG);
 
@@ -579,7 +579,7 @@ static void kvaser_pciefd_start_controller_flush(struct kvaser_pciefd_can *can)
 
        spin_lock_irqsave(&can->lock, irq);
        iowrite32(-1, can->reg_base + KVASER_PCIEFD_KCAN_IRQ_REG);
-       iowrite32(KVASER_PCIEFD_KCAN_IRQ_ABD | KVASER_PCIEFD_KCAN_IRQ_TFD,
+       iowrite32(KVASER_PCIEFD_KCAN_IRQ_ABD,
                  can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG);
 
        status = ioread32(can->reg_base + KVASER_PCIEFD_KCAN_STAT_REG);
@@ -622,7 +622,7 @@ static int kvaser_pciefd_bus_on(struct kvaser_pciefd_can *can)
        iowrite32(0, can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG);
        iowrite32(-1, can->reg_base + KVASER_PCIEFD_KCAN_IRQ_REG);
 
-       iowrite32(KVASER_PCIEFD_KCAN_IRQ_ABD | KVASER_PCIEFD_KCAN_IRQ_TFD,
+       iowrite32(KVASER_PCIEFD_KCAN_IRQ_ABD,
                  can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG);
 
        mode = ioread32(can->reg_base + KVASER_PCIEFD_KCAN_MODE_REG);
@@ -1015,8 +1015,7 @@ static int kvaser_pciefd_setup_can_ctrls(struct kvaser_pciefd *pcie)
                SET_NETDEV_DEV(netdev, &pcie->pci->dev);
 
                iowrite32(-1, can->reg_base + KVASER_PCIEFD_KCAN_IRQ_REG);
-               iowrite32(KVASER_PCIEFD_KCAN_IRQ_ABD |
-                         KVASER_PCIEFD_KCAN_IRQ_TFD,
+               iowrite32(KVASER_PCIEFD_KCAN_IRQ_ABD,
                          can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG);
 
                pcie->can[i] = can;
@@ -1443,9 +1442,6 @@ static int kvaser_pciefd_handle_status_packet(struct kvaser_pciefd *pcie,
                cmd = KVASER_PCIEFD_KCAN_CMD_AT;
                cmd |= ++can->cmd_seq << KVASER_PCIEFD_KCAN_CMD_SEQ_SHIFT;
                iowrite32(cmd, can->reg_base + KVASER_PCIEFD_KCAN_CMD_REG);
-
-               iowrite32(KVASER_PCIEFD_KCAN_IRQ_TFD,
-                         can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG);
        } else if (p->header[0] & KVASER_PCIEFD_SPACK_IDET &&
                   p->header[0] & KVASER_PCIEFD_SPACK_IRM &&
                   cmdseq == (p->header[1] & KVASER_PCIEFD_PACKET_SEQ_MSK) &&
@@ -1732,15 +1728,6 @@ static int kvaser_pciefd_transmit_irq(struct kvaser_pciefd_can *can)
        if (irq & KVASER_PCIEFD_KCAN_IRQ_TOF)
                netdev_err(can->can.dev, "Tx FIFO overflow\n");
 
-       if (irq & KVASER_PCIEFD_KCAN_IRQ_TFD) {
-               u8 count = ioread32(can->reg_base +
-                                   KVASER_PCIEFD_KCAN_TX_NPACKETS_REG) & 0xff;
-
-               if (count == 0)
-                       iowrite32(KVASER_PCIEFD_KCAN_CTRL_EFLUSH,
-                                 can->reg_base + KVASER_PCIEFD_KCAN_CTRL_REG);
-       }
-
        if (irq & KVASER_PCIEFD_KCAN_IRQ_BPP)
                netdev_err(can->can.dev,
                           "Fail to change bittiming, when not in reset mode\n");