ARM: dts: sun8i: h3: orangepi-plus: Fix ethernet phy-mode

[ Upstream commit b19d3479f25e8a0ff24df0b46c82e50ef0f900dd ]

Commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay
config") sets the RX/TX delay according to the phy-mode property in the
device tree. For the Orange Pi Plus board this is "rgmii", which is the
wrong setting.

Following the example of a900cac3750b ("ARM: dts: sun7i: a20: bananapro:
Fix ethernet phy-mode") the phy-mode is changed to "rgmii-id" which gets
the Ethernet working again on this board.

Fixes: bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config")
Reported-by: "B.R. Oake" <broake@mailfence.com>
Reported-by: Vagrant Cascadian <vagrant@reproducible-builds.org>
Link: https://bugs.debian.org/988574
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210524122111.416885-1-carnil@debian.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
index 97f497854e05d26819a692139f0a1e336c8de9a1..d05fa679dcd30558aab6d7a8e33e5308a6b16f98 100644 (file)
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -85,7 +85,7 @@ &emac {
        pinctrl-0 = <&emac_rgmii_pins>;
        phy-supply = <&reg_gmac_3v3>;
        phy-handle = <&ext_rgmii_phy>;
-       phy-mode = "rgmii";
+       phy-mode = "rgmii-id";
 
        status = "okay";
 };