arm64: dts: imx8-ss-conn: fix usb lpcg indices

commit 808e7716edcdb39d3498b9f567ef6017858b49aa upstream.

usb2_lpcg: clock-controller@5b270000 {
	...                                                    Col1  Col2
	clocks = <&conn_ahb_clk>, <&conn_ipg_clk>;           // 0     6
	clock-indices = <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>;  // 0     7
        ...
};

Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.

usbotg1: usb@5b0d0000 {
	...
	clocks = <&usb2_lpcg 0>;
			     ^^
Should be:
	clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
};

usbphy1: usbphy@5b100000 {
	clocks = <&usb2_lpcg 1>;
			     ^^
SHould be:
	clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
};

Arg0 is divided by 4 in lpcg driver. So lpcg will do dummy enable. Fix it
by use correct clock indices.

Cc: stable@vger.kernel.org
Fixes: 8065fc937f0f ("arm64: dts: imx8dxl: add usb1 and usb2 support")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
index af2259e997967e5d8613e1cb5bad148fe8110c91..4aaf5a0c1ed8af6f7f845be079c9297f35d2d72b 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -41,7 +41,7 @@ usbotg1: usb@5b0d0000 {
                interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
                fsl,usbphy = <&usbphy1>;
                fsl,usbmisc = <&usbmisc1 0>;
-               clocks = <&usb2_lpcg 0>;
+               clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
                ahb-burst-config = <0x0>;
                tx-burst-size-dword = <0x10>;
                rx-burst-size-dword = <0x10>;
@@ -58,7 +58,7 @@ usbmisc1: usbmisc@5b0d0200 {
        usbphy1: usbphy@5b100000 {
                compatible = "fsl,imx7ulp-usbphy";
                reg = <0x5b100000 0x1000>;
-               clocks = <&usb2_lpcg 1>;
+               clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
                power-domains = <&pd IMX_SC_R_USB_0_PHY>;
                status = "disabled";
        };