The introduction of the SVE registers to userspace started with a
refactoring of the way we expose any register via the ONE_REG
interface.
Unfortunately, this change doesn't exactly behave as expected
if the number of registers is non-zero and consider everything
to be an error. The visible result is that QEMU barfs very early
when creating vcpus.
Make sure we only exit early in case there is an actual error, rather
than a positive number of registers...
Fixes: be25bbb392fa ("KVM: arm64: Factor out core register ID enumeration") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Takahiro Itazuri <itazur@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit d26c25a9d19b ("arm64: KVM: Tighten guest core register
access from userspace"), KVM_{GET,SET}_ONE_REG rejects register IDs
that do not correspond to a single underlying architectural register.
KVM_GET_REG_LIST was not changed to match however: instead, it
simply yields a list of 32-bit register IDs that together cover the
whole kvm_regs struct. This means that if userspace tries to use
the resulting list of IDs directly to drive calls to KVM_*_ONE_REG,
some of those calls will now fail.
This was not the intention. Instead, iterating KVM_*_ONE_REG over
the list of IDs returned by KVM_GET_REG_LIST should be guaranteed
to work.
This patch fixes the problem by splitting validate_core_offset()
into a backend core_reg_size_from_offset() which does all of the
work except for checking that the size field in the register ID
matches, and kvm_arm_copy_reg_indices() and num_core_regs() are
converted to use this to enumerate the valid offsets.
kvm_arm_copy_reg_indices() now also sets the register ID size field
appropriately based on the value returned, so the register ID
supplied to userspace is fully qualified for use with the register
access ioctls.
Cc: stable@vger.kernel.org Fixes: d26c25a9d19b ("arm64: KVM: Tighten guest core register access from userspace") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Tested-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Takahiro Itazuri <itazur@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation for adding logic to filter out some KVM_REG_ARM_CORE
registers from the KVM_GET_REG_LIST output, this patch factors out
the core register enumeration into a separate function and rebuilds
num_core_regs() on top of it.
This may be a little more expensive (depending on how good a job
the compiler does of specialising the code), but KVM_GET_REG_LIST
is not a hot path.
This will make it easier to consolidate ID filtering code in one
place.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Takahiro Itazuri <itazur@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The effective values of the guest CR0 and CR4 registers may differ from
those included in the VMCS12. In particular, disabling EPT forces
CR4.PAE=1 and disabling unrestricted guest mode forces CR0.PG=CR0.PE=1.
Therefore, checks on these bits cannot be delegated to the processor
and must be performed by KVM.
Reported-by: Reima ISHII <ishiir@g.ecc.u-tokyo.ac.jp> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[OP: drop CC() macro calls, as tracing is not implemented in 4.19]
[OP: adjust "return -EINVAL" -> "return 1" to match current return logic] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to honour the max_hw_heartbeat_ms while programming the timeout
value to WOR. Clamp the timeout passed to sbsa_gwdt_set_timeout() to
make sure the programmed value is within the permissible range.
Fixes: abd3ac7902fb ("watchdog: sbsa: Support architecture version 1") Signed-off-by: George Cherian <george.cherian@marvell.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230209021117.1512097-1-george.cherian@marvell.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Tyler Hicks (Microsoft) <code@tyhicks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After a successful cpuset_can_attach() call which increments the
attach_in_progress flag, either cpuset_cancel_attach() or cpuset_attach()
will be called later. In cpuset_attach(), tasks in cpuset_attach_wq,
if present, will be woken up at the end. That is not the case in
cpuset_cancel_attach(). So missed wakeup is possible if the attach
operation is somehow cancelled. Fix that by doing the wakeup in
cpuset_cancel_attach() as well.
Fixes: e44193d39e8d ("cpuset: let hotplug propagation work wait for task attaching") Signed-off-by: Waiman Long <longman@redhat.com> Reviewed-by: Michal Koutný <mkoutny@suse.com> Cc: stable@vger.kernel.org # v3.11+ Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During the processing of the bgt, if the sync_erase() return -EBUSY
or some other error code in __erase_worker(),schedule_erase() called
again lead to the down_read(ubi->work_sem) hold twice and may get
block by down_write(ubi->work_sem) in ubi_update_fastmap(),
which cause deadlock.
ubi bgt other task
do_work
down_read(&ubi->work_sem) ubi_update_fastmap
erase_worker # Blocked by down_read
__erase_worker down_write(&ubi->work_sem)
schedule_erase
schedule_ubi_work
down_read(&ubi->work_sem)
Fix this by changing input parameter @nested of the schedule_erase() to
'true' to avoid recursively acquiring the down_read(&ubi->work_sem).
Also, fix the incorrect comment about @nested parameter of the
schedule_erase() because when down_write(ubi->work_sem) is held, the
@nested is also need be true.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217093 Fixes: 2e8f08deabbc ("ubi: Fix races around ubi_refill_pools()") Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/mtd/ubi/wl.c:584: warning: Function parameter or member 'nested' not described in 'schedule_erase'
drivers/mtd/ubi/wl.c:1075: warning: Excess function parameter 'shutdown' description in '__erase_worker'
Cc: Richard Weinberger <richard@nod.at> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201109182206.3037326-13-lee.jones@linaro.org
Stable-dep-of: f773f0a331d6 ("ubi: Fix deadlock caused by recursively holding work_sem") Signed-off-by: Sasha Levin <sashal@kernel.org>
Following process will make ubi attaching failed since commit 1b42b1a36fc946 ("ubi: ensure that VID header offset ... size"):
ID="0xec,0xa1,0x00,0x15" # 128M 128KB 2KB
modprobe nandsim id_bytes=$ID
flash_eraseall /dev/mtd0
modprobe ubi mtd="0,2048" # set vid_hdr offset as 2048 (one page)
(dmesg):
ubi0 error: ubi_attach_mtd_dev [ubi]: VID header offset 2048 too large.
UBI error: cannot attach mtd0
UBI error: cannot initialize UBI, error -22
Rework original solution, the key point is making sure
'vid_hdr_shift + UBI_VID_HDR_SIZE < ubi->vid_hdr_alsize',
so we should check vid_hdr_shift rather not vid_hdr_offset.
Then, ubi still support (sub)page aligined VID header offset.
Fixes: 1b42b1a36fc946 ("ubi: ensure that VID header offset ... size") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Tested-by: Nicolas Schichan <nschichan@freebox.fr> Tested-by: Miquel Raynal <miquel.raynal@bootlin.com> # v5.10, v4.19 Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The AMD [1022:15b8] USB controller loses some internal functional MSI-X
context when transitioning from D0 to D3hot. BIOS normally traps D0->D3hot
and D3hot->D0 transitions so it can save and restore that internal context,
but some firmware in the field can't do this because it fails to clear the
AMD_15B8_RCC_DEV2_EPF0_STRAP2 NO_SOFT_RESET bit.
Clear AMD_15B8_RCC_DEV2_EPF0_STRAP2 NO_SOFT_RESET bit before USB controller
initialization during boot.
This reverts commit 3fe97ff3d949 ("scsi: ses: Don't attach if enclosure
has no components") and introduces proper handling of case where there are
no detected secondary components, but primary component (enumerated in
num_enclosures) does exist. That fix was originally proposed by Ding Hui
<dinghui@sangfor.com.cn>.
Completely ignoring devices that have one primary enclosure and no
secondary one results in ses_intf_add() bailing completely
scsi 2:0:0:254: enclosure has no enumerated components
scsi 2:0:0:254: Failed to bind enclosure -12ven in valid configurations such
even on valid configurations with 1 primary and 0 secondary enclosures as
below:
# sg_ses /dev/sg0
3PARdata SES 3321
Supported diagnostic pages:
Supported Diagnostic Pages [sdp] [0x0]
Configuration (SES) [cf] [0x1]
Short Enclosure Status (SES) [ses] [0x8]
# sg_ses -p cf /dev/sg0
3PARdata SES 3321
Configuration diagnostic page:
number of secondary subenclosures: 0
generation code: 0x0
enclosure descriptor list
Subenclosure identifier: 0 [primary]
relative ES process id: 0, number of ES processes: 1
number of type descriptor headers: 1
enclosure logical identifier (hex): 20000002ac02068d
enclosure vendor: 3PARdata product: VV rev: 3321
type descriptor header and text list
Element type: Unspecified, subenclosure id: 0
number of possible elements: 1
The changelog for the original fix follows
=====
We can get a crash when disconnecting the iSCSI session,
the call trace like this:
In ses_intf_add, components count could be 0, and kcalloc 0 size scomp,
but not saved in edev->component[i].scratch
In this situation, edev->component[0].scratch is an invalid pointer,
when kfree it in ses_intf_remove_enclosure, a crash like above would happen
The call trace also could be other random cases when kfree cannot catch
the invalid pointer
We should not use edev->component[] array when the components count is 0
We also need check index when use edev->component[] array in
ses_enclosure_data_process
=====
Reported-by: Michal Kolar <mich.k@seznam.cz> Originally-by: Ding Hui <dinghui@sangfor.com.cn> Cc: stable@vger.kernel.org Fixes: 3fe97ff3d949 ("scsi: ses: Don't attach if enclosure has no components") Signed-off-by: Jiri Kosina <jkosina@suse.cz> Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2304042122270.29760@cbobk.fhfr.pm Tested-by: Michal Kolar <mich.k@seznam.cz> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PE Format Specification (section "The Attribute Certificate Table
(Image Only)") states that `dwLength` is to be rounded up to 8-byte
alignment when used for traversal. Therefore, the field is not required
to be an 8-byte multiple in the first place.
Accordingly, pesign has not performed this alignment since version
0.110. This causes kexec failure on pesign'd binaries with "PEFILE:
Signature wrapper len wrong". Update the comment and relax the check.
Another Lenovo convertable which reports a landscape resolution of
1920x1200 with a pitch of (1920 * 4) bytes, while the actual framebuffer
has a resolution of 1200x1920 with a pitch of (1200 * 4) bytes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This doesn't need to be printed every second as an error:
...
<3>[17438.628385] cros-usbpd-charger cros-usbpd-charger.3.auto: Port 1: default case!
<3>[17439.634176] cros-usbpd-charger cros-usbpd-charger.3.auto: Port 1: default case!
<3>[17440.640298] cros-usbpd-charger cros-usbpd-charger.3.auto: Port 1: default case!
...
Reduce priority from ERROR to DEBUG.
Signed-off-by: Grant Grundler <grundler@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
lena wang reported an issue caused by udpv6_sendmsg()
mangling msg->msg_name and msg->msg_namelen, which
are later read from ____sys_sendmsg() :
/*
* If this is sendmmsg() and sending to current destination address was
* successful, remember it.
*/
if (used_address && err >= 0) {
used_address->name_len = msg_sys->msg_namelen;
if (msg_sys->msg_name)
memcpy(&used_address->name, msg_sys->msg_name,
used_address->name_len);
}
udpv6_sendmsg() wants to pretend the remote address family
is AF_INET in order to call udp_sendmsg().
A fix would be to modify the address in-place, instead
of using a local variable, but this could have other side effects.
Instead, restore initial values before we return from udpv6_sendmsg().
Fixes: c71d8ebe7a44 ("net: Fix security_socket_sendmsg() bypass problem.") Reported-by: lena wang <lena.wang@mediatek.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20230412130308.1202254-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
For quite some time we were chasing a bug which looked like a sudden
permanent failure of networking and mmc on some of our devices.
The bug was very sensitive to any software changes and even more to
any kernel debug options.
Finally we got a setup where the problem was reproducible with
CONFIG_DMA_API_DEBUG=y and it revealed the issue with the rx dma:
Lars was fast to find an explanation: according to the datasheet
bit 2 of the rx buffer descriptor entry has a different meaning in the
extended mode:
Address [2] of beginning of buffer, or
in extended buffer descriptor mode (DMA configuration register [28] = 1),
indicates a valid timestamp in the buffer descriptor entry.
The macb driver didn't mask this bit while getting an address and it
eventually caused a memory corruption and a dma failure.
The problem is resolved by explicitly clearing the problematic bit
if hw timestamping is used.
Fixes: 7b4296148066 ("net: macb: Add support for PTP timestamps in DMA descriptors") Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Co-developed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20230412232144.770336-1-roman.gushchin@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, when traversing ifwdtsn skips with _sctp_walk_ifwdtsn, it only
checks the pos against the end of the chunk. However, the data left for
the last pos may be < sizeof(struct sctp_ifwdtsn_skip), and dereference
it as struct sctp_ifwdtsn_skip may cause coverflow.
This patch fixes it by checking the pos against "the end of the chunk -
sizeof(struct sctp_ifwdtsn_skip)" in sctp_ifwdtsn_skip, similar to
sctp_fwdtsn_skip.
Static code analyzer complains to unchecked return value.
The result of pci_reset_function() is unchecked.
Despite, the issue is on the FLR supported code path and in that
case reset can be done with pcie_flr(), the patch uses less invasive
approach by adding the result check of pci_reset_function().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 7e2cf4feba05 ("qlcnic: change driver hardware interface mechanism") Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If niu_rbr_fill() fails, then we are directly returning 'err' without
freeing the channels.
Fix this by changing direct return to a goto 'out_err'.
Fixes: a3138df9f20e ("[NIU]: Add Sun Neptune ethernet driver.") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: 71ebd71921e4 ("xen/9pfs: connect to the backend") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a potential race condition in hidp_session_thread that may
lead to use-after-free. For instance, the timer is active while
hidp_del_timer is called in hidp_session_thread(). After hidp_session_put,
then 'session' will be freed, causing kernel panic when hidp_idle_timeout
is running.
The solution is to use del_timer_sync instead of del_timer.
Cc: stable@vger.kernel.org Signed-off-by: Min Li <lm0963hack@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Similar to commit d0be8347c623 ("Bluetooth: L2CAP: Fix use-after-free
caused by l2cap_chan_put"), just use l2cap_chan_hold_unless_zero to
prevent referencing a channel that is about to be destroyed.
Cc: stable@kernel.org Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Min Li <lm0963hack@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The BIOS botches this one completely - it says the 2nd S/PDIF output is
used, while in fact it's the 1st one. This is tested on DP45SG, but I'm
assuming it's valid for the other boards in the series as well.
Also add some comments regarding the pins.
FWIW, the codec is apparently still sold by Tempo Semiconductor, Inc.,
where one can download the documentation.
Due to two copy/pastos, closing the MIC or EFX capture device would
make a running ADC capture hang due to unsetting its interrupt handler.
In principle, this would have also allowed dereferencing dangling
pointers, but we're actually rather thorough at disabling and flushing
the ints.
While it may sound like one, this actually wasn't a hypothetical bug:
PortAudio will open a capture stream at startup (and close it right
away) even if not asked to. If the first device is busy, it will just
proceed with the next one ... thus killing a concurrent capture.
This patch introduces a regression on Lenovo Z13, which can't wake
from the lid with it applied; and some unspecified AMD based Dell
platforms are unable to wake from hitting the power button
The si->lock must be held when deleting the si from the available list.
Otherwise, another thread can re-add the si to the available list, which
can lead to memory corruption. The only place we have found where this
happens is in the swapoff path. This case can be described as below:
core 0 core 1
swapoff
del_from_avail_list(si) waiting
try lock si->lock acquire swap_avail_lock
and re-add si into
swap_avail_head
acquire si->lock but missing si already being added again, and continuing
to clear SWP_WRITEOK, etc.
It can be easily found that a massive warning messages can be triggered
inside get_swap_pages() by some special cases, for example, we call
madvise(MADV_PAGEOUT) on blocks of touched memory concurrently, meanwhile,
run much swapon-swapoff operations (e.g. stress-ng-swap).
However, in the worst case, panic can be caused by the above scene. In
swapoff(), the memory used by si could be kept in swap_info[] after
turning off a swap. This means memory corruption will not be caused
immediately until allocated and reset for a new swap in the swapon path.
A panic message caused: (with CONFIG_PLIST_DEBUG enabled)
Now, si->lock locked before calling 'del_from_avail_list()' to make sure
other thread see the si had been deleted and SWP_WRITEOK cleared together,
will not reinsert again.
This problem exists in versions after stable 5.10.y.
Link: https://lkml.kernel.org/r/20230404154716.23058-1-rongwei.wang@linux.alibaba.com Fixes: a2468cc9bfdff ("swap: choose swap device according to numa node") Tested-by: Yongchen Yin <wb-yyc939293@alibaba-inc.com> Signed-off-by: Rongwei Wang <rongwei.wang@linux.alibaba.com> Cc: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Aaron Lu <aaron.lu@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When user reads file 'trace_pipe', kernel keeps printing following logs
that warn at "cpu_buffer->reader_page->read > rb_page_size(reader)" in
rb_get_reader_page(). It just looks like there's an infinite loop in
tracing_read_pipe(). This problem occurs several times on arm64 platform
when testing v5.10 and below.
Then I dump the vmcore and look into the problematic per_cpu ring_buffer,
I found that tail_page/commit_page/reader_page are on the same page while
reader_page->read is obviously abnormal:
tail_page == commit_page == reader_page == {
.write = 0x100d20,
.read = 0x8f9f4805, // Far greater than 0xd20, obviously abnormal!!!
.entries = 0x10004c,
.real_end = 0x0,
.page = {
.time_stamp = 0x857257416af0,
.commit = 0xd20, // This page hasn't been full filled.
// .data[0...0xd20] seems normal.
}
}
The root cause is most likely the race that reader and writer are on the
same page while reader saw an event that not fully committed by writer.
To fix this, add memory barriers to make sure the reader can see the
content of what is committed. Since commit a0fcaaed0c46 ("ring-buffer: Fix
race between reset page and reading page") has added the read barrier in
rb_get_reader_page(), here we just need to add the write barrier.
Link: https://lore.kernel.org/linux-trace-kernel/20230325021247.2923907-1-zhengyejian1@huawei.com Cc: stable@vger.kernel.org Fixes: 77ae365eca89 ("ring-buffer: make lockless") Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the compiler decides not to inline this function then preemption
tracing will always show an IP inside the preemption disabling path and
never the function actually calling preempt_{enable,disable}.
Link: https://lore.kernel.org/linux-trace-kernel/20230327173647.1690849-1-john@metanate.com Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: stable@vger.kernel.org Fixes: f904f58263e1d ("sched/debug: Fix preempt_disable_ip recording for preempt_disable()") Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The same task check in perf_event_set_output has some potential issues
for some usages.
For the current perf code, there is a problem if using of
perf_event_open() to have multiple samples getting into the same mmap’d
memory when they are both attached to the same process.
https://lore.kernel.org/all/92645262-D319-4068-9C44-2409EF44888E@gmail.com/
Because the event->ctx is not ready when the perf_event_set_output() is
invoked in the perf_event_open().
Besides the above issue, before the commit bd2756811766 ("perf: Rewrite
core context handling"), perf record can errors out when sampling with
a hardware event and a software event as below.
$ perf record -e cycles,dummy --per-thread ls
failed to mmap with 22 (Invalid argument)
That's because that prior to the commit a hardware event and a software
event are from different task context.
The problem should be a long time issue since commit c3f00c70276d
("perk: Separate find_get_context() from event initialization").
The task struct is stored in the event->hw.target for each per-thread
event. It is a more reliable way to determine whether two events are
attached to the same task.
The event->hw.target was also introduced several years ago by the
commit 50f16a8bf9d7 ("perf: Remove type specific target pointers"). It
can not only be used to fix the issue with the current code, but also
back port to fix the issues with an older kernel.
Note: The event->hw.target was introduced later than commit c3f00c70276d. The patch may cannot be applied between the commit c3f00c70276d and commit 50f16a8bf9d7. Anybody that wants to back-port
this at that period may have to find other solutions.
Fixes: c3f00c70276d ("perf: Separate find_get_context() from event initialization") Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Zhengjun Xing <zhengjun.xing@linux.intel.com> Link: https://lkml.kernel.org/r/20230322202449.512091-1-kan.liang@linux.intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The current nilfs2 sysfs support has issues with the timing of creation
and deletion of sysfs entries, potentially leading to null pointer
dereferences, use-after-free, and lockdep warnings.
Some of the sysfs attributes for nilfs2 per-filesystem instance refer to
metadata file "cpfile", "sufile", or "dat", but
nilfs_sysfs_create_device_group that creates those attributes is executed
before the inodes for these metadata files are loaded, and
nilfs_sysfs_delete_device_group which deletes these sysfs entries is
called after releasing their metadata file inodes.
Therefore, access to some of these sysfs attributes may occur outside of
the lifetime of these metadata files, resulting in inode NULL pointer
dereferences or use-after-free.
In addition, the call to nilfs_sysfs_create_device_group() is made during
the locking period of the semaphore "ns_sem" of nilfs object, so the
shrinker call caused by the memory allocation for the sysfs entries, may
derive lock dependencies "ns_sem" -> (shrinker) -> "locks acquired in
nilfs_evict_inode()".
Since nilfs2 may acquire "ns_sem" deep in the call stack holding other
locks via its error handler __nilfs_error(), this causes lockdep to report
circular locking. This is a false positive and no circular locking
actually occurs as no inodes exist yet when
nilfs_sysfs_create_device_group() is called. Fortunately, the lockdep
warnings can be resolved by simply moving the call to
nilfs_sysfs_create_device_group() out of "ns_sem".
This fixes these sysfs issues by revising where the device's sysfs
interface is created/deleted and keeping its lifetime within the lifetime
of the metadata files above.
The finalization of nilfs_segctor_thread() can race with
nilfs_segctor_kill_thread() which terminates that thread, potentially
causing a use-after-free BUG as KASAN detected.
At the end of nilfs_segctor_thread(), it assigns NULL to "sc_task" member
of "struct nilfs_sc_info" to indicate the thread has finished, and then
notifies nilfs_segctor_kill_thread() of this using waitqueue
"sc_wait_task" on the struct nilfs_sc_info.
However, here, immediately after the NULL assignment to "sc_task", it is
possible that nilfs_segctor_kill_thread() will detect it and return to
continue the deallocation, freeing the nilfs_sc_info structure before the
thread does the notification.
This fixes the issue by protecting the NULL assignment to "sc_task" and
its notification, with spinlock "sc_state_lock" of the struct
nilfs_sc_info. Since nilfs_segctor_kill_thread() does a final check to
see if "sc_task" is NULL with "sc_state_lock" locked, this can eliminate
the race.
SCI IP on RZ/G2L alike SoCs do not need regshift compared to other SCI
IPs on the SH platform. Currently, it does regshift and configuring Rx
wrongly. Drop adding regshift for RZ/G2L alike SoCs.
Fixes: dfc80387aefb ("serial: sh-sci: Compute the regshift value for SCI ports") Cc: stable@vger.kernel.org Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230321114753.75038-3-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fourth interrupt on SCI port is transmit end interrupt compared to
the break interrupt on other port types. So, shuffle the interrupts to fix
the transmit end interrupt handler.
The CIO-DAC series of devices only supports DAC values up to 12-bit
rather than 16-bit. Trying to write a 16-bit value results in only the
lower 12 bits affecting the DAC output which is not what the user
expects. Instead, adjust the DAC write value check to reject values
larger than 12-bit so that they fail explicitly as invalid for the user.
Fixes: 3b8df5fd526e ("iio: Add IIO support for the Measurement Computing CIO-DAC family") Cc: stable@vger.kernel.org Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/20230311002248.8548-1-william.gray@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Silicon Labs IFS-USB-DATACABLE is used in conjunction with for example
the Quint UPSes. It is used to enable Modbus communication with the UPS to
query configuration, power and battery status.
Signed-off-by: Kees Jan Koster <kjkoster@kjkoster.org> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is because icmp6hdr does not in skb linear region under the scenario
of SOCK_RAW socket. Access icmp6_hdr(skb)->icmp6_type directly will
trigger the uninit variable access bug.
Use a local variable icmp6_type to carry the correct value in different
scenarios.
Fixes: 14878f75abd5 ("[IPV6]: Add ICMPMsgStats MIB (RFC 4293) [rev 2]") Reported-by: syzbot+8257f4dcef79de670baf@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=3d605ec1d0a7f2a269a1a6936ac7f2b85975ee9c Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch fixes a corner case where the asoc out stream count may change
after wait_for_sndbuf.
When the main thread in the client starts a connection, if its out stream
count is set to N while the in stream count in the server is set to N - 2,
another thread in the client keeps sending the msgs with stream number
N - 1, and waits for sndbuf before processing INIT_ACK.
However, after processing INIT_ACK, the out stream count in the client is
shrunk to N - 2, the same to the in stream count in the server. The crash
occurs when the thread waiting for sndbuf is awake and sends the msg in a
non-existing stream(N - 1), the call trace is as below:
Commit 0db3dc73f7a3 ("[NETPOLL]: tx lock deadlock fix") narrowed
down the region under netif_tx_trylock() inside netpoll_send_skb().
(At that point in time netif_tx_trylock() would lock all queues of
the device.) Taking the tx lock was problematic because driver's
cleanup method may take the same lock. So the change made us hold
the xmit lock only around xmit, and expected the driver to take
care of locking within ->ndo_poll_controller().
Unfortunately this only works if netpoll isn't itself called with
the xmit lock already held. Netpoll code is careful and uses
trylock(). The drivers, however, may be using plain lock().
Printing while holding the xmit lock is going to result in rare
deadlocks.
Luckily we record the xmit lock owners, so we can scan all the queues,
the same way we scan NAPI owners. If any of the xmit locks is held
by the local CPU we better not attempt any polling.
It would be nice if we could narrow down the check to only the NAPIs
and the queue we're trying to use. I don't see a way to do that now.
Reported-by: Roman Gushchin <roman.gushchin@linux.dev> Fixes: 0db3dc73f7a3 ("[NETPOLL]: tx lock deadlock fix") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When we're using a cached open stateid or a delegation in order to avoid
sending a CLAIM_PREVIOUS open RPC call to the server, we don't have a
new open stateid to present to update_open_stateid().
Instead rely on nfs4_try_open_cached(), just as if we were doing a
normal open.
Ensure that we always check the return value of update_open_stateid()
so that we can retry if the update of local state failed. This fixes
infinite looping on state recovery.
Fixes: e23008ec81ef3 ("NFSv4 reduce attribute requests for open reclaim") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v3.7+
Stable-dep-of: 6165a16a5ad9 ("NFSv4: Fix hangs when recovering open state after a server reboot") Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable-dep-of: 6165a16a5ad9 ("NFSv4: Fix hangs when recovering open state after a server reboot") Signed-off-by: Sasha Levin <sashal@kernel.org>
This fixes a similar problem to the one observed in:
commit 4e5a04be88fe ("pinctrl: amd: disable and mask interrupts on probe").
On some systems, during suspend/resume cycle firmware leaves
an interrupt enabled on a pin that is not used by the kernel.
This confuses the AMD pinctrl driver and causes spurious interrupts.
The driver already has logic to detect if a pin is used by the kernel.
Leverage it to re-initialize interrupt fields of a pin only if it's not
used by us.
Some systems such as the Microsoft Surface Laptop 4 leave interrupts
enabled and configured for use in sleep states on boot, which cause
unexpected behaviour such as spurious wakes and failed resumes in
s2idle states.
As interrupts should not be enabled until they are claimed and
explicitly enabled, disabling any interrupts mistakenly left enabled by
firmware should be safe.
syzbot is hitting percpu_rwsem_assert_held(&cpu_hotplug_lock) warning at
cpuset_attach() [1], for commit 4f7e7236435ca0ab ("cgroup: Fix
threadgroup_rwsem <-> cpus_read_lock() deadlock") missed that
cpuset_attach() is also called from cgroup_attach_task_all().
Add cpus_read_lock() like what cgroup_procs_write_start() does.
Add #include <linux/cpu.h> to avoid compile error on some architectures.
commit 9a3284fad42f6 ("cgroup: Optimize single thread migration") and
commit 671c11f0619e5 ("cgroup: Elide write-locking threadgroup_rwsem
when updating csses on an empty subtree") are not backport. So ignore the
input parameter of cgroup_attach_lock/cgroup_attach_unlock.
original commit message:
Bringing up a CPU may involve creating and destroying tasks which requires
read-locking threadgroup_rwsem, so threadgroup_rwsem nests inside
cpus_read_lock(). However, cpuset's ->attach(), which may be called with
thredagroup_rwsem write-locked, also wants to disable CPU hotplug and
acquires cpus_read_lock(), leading to a deadlock.
Fix it by guaranteeing that ->attach() is always called with CPU hotplug
disabled and removing cpus_read_lock() call from cpuset_attach().
Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-and-tested-by: Imran Khan <imran.f.khan@oracle.com> Reported-and-tested-by: Xuewen Yan <xuewen.yan@unisoc.com> Fixes: 05c7b7a92cc8 ("cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug") Cc: stable@vger.kernel.org # v5.17+ Signed-off-by: Cai Xinchen <caixinchen1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1243dc518c9da ("cgroup/cpuset: Convert cpuset_mutex to
percpu_rwsem") is performance patch which is not backport. So
convert percpu_rwsem to cpuset_mutex.
commit aa44002e7db25 ("cpuset: Fix unsafe lock order between
cpuset lock and cpuslock") makes lock order keep cpuset_mutex
->cpu_hotplug_lock. We should change lock order in cpuset_attach.
original commit message:
cpuset_rwsem is going to be acquired from sched_setscheduler() with a
following patch. There are however paths (e.g., spawn_ksoftirqd) in
which sched_scheduler() is eventually called while holding hotplug lock;
this creates a dependecy between hotplug lock (to be always acquired
first) and cpuset_rwsem (to be always acquired after hotplug lock).
Fix paths which currently take the two locks in the wrong order (after
a following patch is applied).
Check if the inode size of stuffed (inline) inodes is within the allowed
range when reading inodes from disk (gfs2_dinode_in()). This prevents
us from on-disk corruption.
The two checks in stuffed_readpage() and gfs2_unstuffer_page() that just
truncate inline data to the maximum allowed size don't actually make
sense, and they can be removed now as well.
Reported-by: syzbot+7bb81dfa9cda07d9cd9d@syzkaller.appspotmail.com Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
[pchelkin@ispras.ru: adjust the inode variable inside gfs2_dinode_in with
the format used before upstream commit 7db354444ad8 ("gfs2: Cosmetic
gfs2_dinode_{in,out} cleanup")] Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When mailboxes are used as a transport it is possible to setup the SCMI
transport layer, depending on the underlying channels configuration, to use
one or two mailboxes, associated, respectively, to one or two, distinct,
shared memory areas: any other combination should be treated as invalid.
Add more strict checking of SCMI mailbox transport device node descriptors.
Fixes: 5c8a47a5a91d ("firmware: arm_scmi: Make scmi core independent of the transport type") Cc: <stable@vger.kernel.org> # 4.19 Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20230307162324.891866-1-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
[Cristian: backported to v4.19] Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Above issue may happens as follows:
ext4_da_write_begin
ext4_da_write_inline_data_begin
ext4_da_convert_inline_data_to_extent
ext4_clear_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA);
ext4_da_write_end
ext4_run_li_request
ext4_mb_prefetch
ext4_read_block_bitmap_nowait
ext4_validate_block_bitmap
ext4_mark_group_bitmap_corrupted(sb, block_group, EXT4_GROUP_INFO_BBITMAP_CORRUPT)
percpu_counter_sub(&sbi->s_freeclusters_counter,grp->bb_free);
-> sbi->s_freeclusters_counter become zero
ext4_da_write_begin
if (ext4_nonda_switch(inode->i_sb)) -> As freeclusters_counter is zero will return true
*fsdata = (void *)FALL_BACK_TO_NONDELALLOC;
ext4_write_begin
ext4_da_write_end
if (write_mode == FALL_BACK_TO_NONDELALLOC)
ext4_write_end
if (inline_data)
ext4_write_inline_data_end
ext4_write_inline_data
BUG_ON(pos + len > EXT4_I(inode)->i_inline_size);
-> As inode is already convert to extent, so 'pos + len' > inline_size
-> then trigger BUG.
To solve this issue, instead of checking ext4_has_inline_data() which
is only cleared after data has been written back, check the
EXT4_STATE_MAY_INLINE_DATA flag in ext4_write_end().
Fixes: f19d5870cbf7 ("ext4: add normal write support for inline data") Reported-by: syzbot+4faa160fa96bfba639f8@syzkaller.appspotmail.com Reported-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20221206144134.1919987-1-yebin@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
[ta: Fix conflict in if expression and use the local variable inline_data
as it is initialized with ext4_has_inline_data(inode) anyway.] Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code is supposed to clear the RH_A_NPS and RH_A_PSM bits, but it's
a no-op because of the & vs | typo. This bug predates git and it was
only discovered using static analysis so it must not affect too many
people in real life.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20190817065520.GA29951@mwanda Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add missing earlyclobber annotation to size, to, and tmp2 operands of the
__clear_user() inline assembly since they are modified or written to before
the last usage of all input operands. This can lead to incorrect register
allocation for the inline assembly.
Fixes: 6c2a9e6df604 ("[S390] Use alternative user-copy operations for new hardware.") Reported-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/all/20230321122514.1743889-3-mark.rutland@arm.com/ Cc: stable@vger.kernel.org Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm_gem_prime_mmap() takes a reference on the GEM object, but before that
drm_gem_mmap_obj() already takes a reference, which will be leaked as only
one reference is dropped when the mapping is closed. Drop the extra
reference when dma_buf_mmap() succeeds.
Cc: stable@vger.kernel.org Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's been reported that the recent kernel can't probe the PCM devices
on Roland VS-100 properly, and it turned out to be a regression by the
recent addition of the bit shift range check for the format bits.
In the old code, we just did bit-shift and it resulted in zero, which
is then corrected to the standard PCM format, while the new code
explicitly returns an error in such a case.
For addressing the regression, relax the check and fallback to the
standard PCM type (with the info output).
The recent commit f83bb2592482 ("ALSA: hda/conexant: Add quirk for
LENOVO 20149 Notebook model") introduced a quirk for the device with
17aa:3977, but this caused a regression on another model (Lenovo
Ideadpad U31) with the very same PCI SSID. And, through skimming over
the net, it seems that this PCI SSID is used for multiple different
models, so it's no good idea to apply the quirk with the SSID.
Although we may take a different ID check (e.g. the codec SSID instead
of the PCI SSID), unfortunately, the original patch author couldn't
identify the hardware details any longer as the machine was returned,
and we can't develop the further proper fix.
In this patch, instead, we partially revert the change so that the
quirk won't be applied as default for addressing the regression.
Meanwhile, the quirk function itself is kept, and it's now made to be
applicable via the explicit model=lenovo-20149 option.
Since commit d59f6617eef0 ("genirq: Allow fwnode to carry name
information only") an IRQ domain is always given a name during
allocation (e.g. used for the debugfs entry).
Drop the no longer valid name assignment, which would lead to an attempt
to free a string constant when removing the domain on late probe
failures (e.g. probe deferral).
Fixes: d59f6617eef0 ("genirq: Allow fwnode to carry name information only") Cc: stable@vger.kernel.org # 4.13 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> # on SAMA7G5 Link: https://lore.kernel.org/r/20230224130828.27985-1-johan+linaro@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix xenvif_get_requests() not to do grant copy operations across local
page boundaries. This requires to double the maximum number of copy
operations per queue, as each copy could now be split into 2.
Make sure that struct xenvif_tx_cb doesn't grow too large.
Cc: stable@vger.kernel.org Fixes: ad7f402ae4f4 ("xen/netback: Ensure protocol headers don't fall in the non-linear area") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When compiled with CONFIG_CIFS_DFS_UPCALL disabled, cifs_dfs_d_automount
is NULL. cifs.ko logic for mapping CIFS_FATTR_DFS_REFERRAL attributes to
S_AUTOMOUNT and corresponding dentry flags is retained regardless of
CONFIG_CIFS_DFS_UPCALL, leading to a NULL pointer dereference in
VFS follow_automount() when traversing a DFS referral link:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
Call Trace:
<TASK>
__traverse_mounts+0xb5/0x220
? cifs_revalidate_mapping+0x65/0xc0 [cifs]
step_into+0x195/0x610
? lookup_fast+0xe2/0xf0
path_lookupat+0x64/0x140
filename_lookup+0xc2/0x140
? __create_object+0x299/0x380
? kmem_cache_alloc+0x119/0x220
? user_path_at_empty+0x31/0x50
user_path_at_empty+0x31/0x50
__x64_sys_chdir+0x2a/0xd0
? exit_to_user_mode_prepare+0xca/0x100
do_syscall_64+0x42/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
This fix adds an inline cifs_dfs_d_automount() {return -EREMOTE} handler
when CONFIG_CIFS_DFS_UPCALL is disabled. An alternative would be to
avoid flagging S_AUTOMOUNT, etc. without CONFIG_CIFS_DFS_UPCALL. This
approach was chosen as it provides more control over the error path.
Signed-off-by: David Disseldorp <ddiss@suse.de> Cc: stable@vger.kernel.org Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We can't call smb_init() in CIFSGetDFSRefer() as cifs_reconnect_tcon()
may end up calling CIFSGetDFSRefer() again to get new DFS referrals
and thus causing an infinite recursion.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Cc: stable@vger.kernel.org # 6.2 Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The recent change of -funsigned-char causes additions of negative
numbers to become additions of large positive numbers, leading to wrong
calculations of mouse movement. Change these casts to be explicitly
signed, to take into account negative offsets.
The AlpsPS/2 code previously relied on the assumption that `char` is a
signed type, which was true on x86 platforms (the only place where this
driver is used) before kernel 6.2. However, on 6.2 and later, this
assumption is broken due to the introduction of -funsigned-char as a new
global compiler flag.
Fix this by explicitly specifying the signedness of `char` when sign
extending the values received from the device.
Allow tx buffer array to contain both skb and xdp buffers in order to
enable xdp frame recycling adding XDP_TX verdict support
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 2960a2d33b02 ("net: mvneta: fix potential double-frees in mvneta_txq_sw_deinit()") Signed-off-by: Sasha Levin <sashal@kernel.org>
Do not set the MV88E6XXX_PORT_CTL0_IGMP_MLD_SNOOP bit on CPU or DSA ports.
This allows the host CPU port to be a regular IGMP listener by sending out
IGMP Membership Reports, which would otherwise not be forwarded by the
mv88exxx chip, but directly looped back to the CPU port itself.
Fixes: 54d792f257c6 ("net: dsa: Centralise global and port setup code into mv88e6xxx.") Signed-off-by: Steffen Bätz <steffen@innosonix.de> Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329150140.701559-1-festevam@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
CPU: 1 PID: 5034 Comm: syz-executor350 Not tainted 6.2.0-rc6-syzkaller-80422-geda666ff2276 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
=====================================================
We can follow the call chain and find that 'bcm_tx_setup' function
calls 'memcpy_from_msg' to copy some content to the newly allocated
frame of 'op->frames'. After that the 'len' field of copied structure
being compared with some constant value (64 or 8). However, if
'memcpy_from_msg' returns an error, we will compare some uninitialized
memory. This triggers 'uninit-value' issue.
This patch will add 'memcpy_from_msg' possible errors processing to
avoid uninit-value issue.
When a physical disk is attached directly "without JBOD MAP support" (see
megasas_get_tm_devhandle()) then there is no real error handling in the
driver. Return FAILED instead of SUCCESS.
Fixes: 18365b138508 ("megaraid_sas: Task management support") Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20230324150134.14696-1-thenzl@redhat.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
var->pixclock can be assigned to zero by user. Without
proper check, divide by zero would occur when invoking
macro PICOS2KHZ in au1200fb_fb_check_var.
Variable var->pixclock is controlled by user and can be assigned
to zero. Without proper check, divide by zero would occur in
intelfbhw_validate_mode and intelfbhw_mode_to_hw.
variable var->pixclock can be set by user. In case it
equals to zero, divide by zero would occur in nvidiafb_set_par.
Similar crashes have happened in other fbdev drivers. There
is no check and modification on var->pixclock along the call
chain to nvidia_check_var and nvidiafb_set_par. We believe it
could also be triggered in driver nvidia from user site.
The getaffinity() system call uses 'cpumask_size()' to decide how big
the CPU mask is - so far so good. It is indeed the allocation size of a
cpumask.
But the code also assumes that the whole allocation is initialized
without actually doing so itself. That's wrong, because we might have
fixed-size allocations (making copying and clearing more efficient), but
not all of it is then necessarily used if 'nr_cpu_ids' is smaller.
Having checked other users of 'cpumask_size()', they all seem to be ok,
either using it purely for the allocation size, or explicitly zeroing
the cpumask before using the size in bytes to copy it.
See for example the ublk_ctrl_get_queue_affinity() function that uses
the proper 'zalloc_cpumask_var()' to make sure that the whole mask is
cleared, whether the storage is on the stack or if it was an external
allocation.
Fix this by just zeroing the allocation before using it. Do the same
for the compat version of sched_getaffinity(), which had the same logic.
Also, for consistency, make sched_getaffinity() use 'cpumask_bits()' to
access the bits. For a cpumask_var_t, it ends up being a pointer to the
same data either way, but it's just a good idea to treat it like you
would a 'cpumask_t'. The compat case already did that.
fb_set_var would by called when user invokes ioctl with cmd
FBIOPUT_VSCREENINFO. User-provided data would finally reach
tgafb_check_var. In case var->pixclock is assigned to zero,
divide by zero would occur when checking whether reciprocal
of var->pixclock is too high.
Similar crashes have happened in other fbdev drivers. There
is no check and modification on var->pixclock along the call
chain to tgafb_check_var. We believe it could also be triggered
in driver tgafb from user site.
sound/pci/hda/patch_ca0132.c:4229:2: note: After for loop, i has value 12
for (i = 0; i < TUNING_CTLS_COUNT; i++)
^
sound/pci/hda/patch_ca0132.c:4234:43: note: Array index out of bounds
dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20,
^
This patch cares non match case.
Therefore, We will get too many warning via cppcheck, like below
sound/pci/asihpi/hpi6205.c:238:27: warning: Possible null pointer dereference: pao [nullPointer]
struct hpi_hw_obj *phw = pao->priv;
^
sound/pci/asihpi/hpi6205.c:433:13: note: Calling function '_HPI_6205', 1st argument 'NULL' value is 0
_HPI_6205(NULL, phm, phr);
^
sound/pci/asihpi/hpi6205.c:401:20: note: Calling function 'control_message', 1st argument 'pao' value is 0
control_message(pao, phm, phr);
^
Set phr->error like many functions doing, and don't call _HPI_6205()
with NULL.
slot_store() uses kstrtouint() to get a slot number, but stores the
result in an "int" variable (by casting a pointer).
This can result in a negative slot number if the unsigned int value is
very large.
A negative number means that the slot is empty, but setting a negative
slot number this way will not remove the device from the array. I don't
think this is a serious problem, but it could cause confusion and it is
best to fix it.
Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If bus type is other than imx50_weim_devtype and have no child devices,
variable 'ret' in function weim_parse_dt() will not be initialized, but
will be used as branch condition and return value. Fix this by
initializing 'ret' with 0.
This was discovered with help of clang-analyzer, but the situation is
quite possible in real life.
When buffered write fails to copy data into underlying page cache page,
ocfs2_write_end_nolock() just zeroes out and dirties the page. This can
leave dirty page beyond EOF and if page writeback tries to write this page
before write succeeds and expands i_size, page gets into inconsistent
state where page dirty bit is clear but buffer dirty bits stay set
resulting in page data never getting written and so data copied to the
page is lost. Fix the problem by invalidating page beyond EOF after
failed write.
Link: https://lkml.kernel.org/r/20230302153843.18499-1-jack@suse.cz Fixes: 6dbf7bb55598 ("fs: Don't invalidate page buffers in block_write_full_page()") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ replace block_invalidate_folio to block_invalidatepage ] Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid double free in tun_free_netdev() by moving the
dev->tstats and tun->security allocs to a new ndo_init routine
(tun_net_init()) that will be called by register_netdevice().
ndo_init is paired with the desctructor (tun_free_netdev()),
so if there's an error in register_netdevice() the destructor
will handle the frees.
BUG: KASAN: double-free or invalid-free in selinux_tun_dev_free_security+0x1a/0x20 security/selinux/hooks.c:5605
Commit 829c1651e9c4 ("sched/fair: sanitize vruntime of entity being placed")
fixes an overflowing bug, but ignore a case that se->exec_start is reset
after a migration.
For fixing this case, we delay the reset of se->exec_start after
placing the entity which se->exec_start to detect long sleeping task.
In order to take into account a possible divergence between the clock_task
of 2 rqs, we increase the threshold to around 104 days.
Fixes: 829c1651e9c4 ("sched/fair: sanitize vruntime of entity being placed") Originally-by: Zhang Qiao <zhangqiao22@huawei.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Zhang Qiao <zhangqiao22@huawei.com> Link: https://lore.kernel.org/r/20230317160810.107988-1-vincent.guittot@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a scheduling entity is placed onto cfs_rq, its vruntime is pulled
to the base level (around cfs_rq->min_vruntime), so that the entity
doesn't gain extra boost when placed backwards.
However, if the entity being placed wasn't executed for a long time, its
vruntime may get too far behind (e.g. while cfs_rq was executing a
low-weight hog), which can inverse the vruntime comparison due to s64
overflow. This results in the entity being placed with its original
vruntime way forwards, so that it will effectively never get to the cpu.
To prevent that, ignore the vruntime of the entity being placed if it
didn't execute for much longer than the characteristic sheduler time
scale.
The data->block[0] variable comes from user and is a number between
0-255. Without proper check, the variable may be very large to cause
an out-of-bounds when performing memcpy in slimpro_i2c_blkwr.
projects / linux-stable / log