Some Jasperlake Chromebooks overwrite the system vendor DMI value to the
name of the OEM that manufactured the device. This breaks Chromebook
quirk detection as it expects the system vendor to be "Google".
Add another quirk detection entry that looks for "Google" in the BIOS
version.
The UC-257 is a serial + LPT card, so remove it from this driver.
A patch has been submitted to add it to parport_serial instead.
Additionaly, the UC-431 does not use this card ID, only the UC-420
does. The 431 is a 3-port card and there is no generic 3-port configuration
available, so remove reference to it from this driver.
Currently, if a USB request that was queued by Raw Gadget is interrupted
(via a signal), wait_for_completion_interruptible returns -ERESTARTSYS.
Raw Gadget then attempts to propagate this value to userspace as a return
value from its ioctls. However, when -ERESTARTSYS is returned by a syscall
handler, the kernel internally restarts the syscall.
This doesn't allow userspace applications to interrupt requests queued by
Raw Gadget (which is required when the emulated device is asked to switch
altsettings). It also violates the implied interface of Raw Gadget that a
single ioctl must only queue a single USB request.
Instead, make Raw Gadget do what GadgetFS does: check whether the request
was interrupted (dequeued with status == -ECONNRESET) and report -EINTR to
userspace.
Change lower bcdDevice value for "Super Top USB 2.0 SATA BRIDGE" to match
1.50. I have such an older device with bcdDevice=1.50 and it will not work
otherwise.
The AMD VanGogh SoC contains a DesignWare USB3 Dual-Role Device that can be
operated as either a USB Host or a USB Device, similar to on the AMD Nolan
platform.
be6646bfbaec ("PCI: Prevent xHCI driver from claiming AMD Nolan USB3 DRD
device") added a quirk to let the dwc3 driver claim the Nolan device since
it provides more specific support.
Extend that quirk to include the VanGogh SoC USB3 device.
With patch [1], isotp_poll was updated to also queue the poller in the
so->wait queue, which is used for send state changes. Since the queue
now also contains polling tasks that are not interested in sending, the
queue fill state can no longer be used as an indication of send
readiness. As a consequence, nonblocking writes can lead to a race and
lock-up of the socket if there is a second task polling the socket in
parallel.
With this patch, isotp_sendmsg does not consult wq_has_sleepers but
instead tries to atomically set so->tx.state and waits on so->wait if it
is unable to do so. This behavior is in alignment with isotp_poll, which
also checks so->tx.state to determine send readiness.
With commit 2aa39889c463 ("can: isotp: isotp_bind(): return -EINVAL on
incorrect CAN ID formatting") the bind() syscall returns -EINVAL when
the given CAN ID needed to be sanitized. But in the case of an unconfirmed
broadcast mode the rx CAN ID is not needed and may be uninitialized from
the caller - which is ok.
This patch makes sure the result of an inproper CAN ID format is only
provided when the address information is needed.
Due to the existing patch order applied to isotp.c in the stable kernel the
original order of depending patches the three original patches 4b7fe92c0690 ("can: isotp: add local echo tx processing for consecutive frames") 9f39d36530e5 ("can: isotp: add support for transmission without flow control") 051737439eae ("can: isotp: fix race between isotp_sendsmg() and isotp_release()")
can not be split into different patches that can be applied in working steps
to the stable tree.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When wait_event_interruptible() has been interrupted by a signal the
tx.state value might not be ISOTP_IDLE. Force the state machines
into idle state to inhibit the timer handlers to continue working.
Fixes: 866337865f37 ("can: isotp: fix tx state handling for echo tx processing") Cc: stable@vger.kernel.org Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230112192347.1944-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Syzbot created some code which matched the right sockaddr struct size
but used AF_XDP (0x2C) instead of AF_CAN (0x1D) in the address family
field:
bind$xdp(r2, &(0x7f0000000540)={0x2c, 0x0, r4, 0x0, r2}, 0x10)
^^^^
This has no funtional impact but the userspace should be notified about
the wrong address family field content.
Commit 3ea566422cbd ("can: isotp: sanitize CAN ID checks in
isotp_bind()") checks the given CAN ID address information by
sanitizing the input values.
This check (silently) removes obsolete bits by masking the given CAN
IDs.
Derek Will suggested to give a feedback to the application programmer
when the 'sanitizing' was actually needed which means the programmer
provided CAN ID content in a wrong format (e.g. SFF CAN IDs with a CAN
ID > 0x7FF).
Link: https://lore.kernel.org/all/20220515181633.76671-1-socketcan@hartkopp.net Suggested-by: Derek Will <derekrobertwill@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The reason to extend the max PDU size from 4095 Byte (12 bit length value)
to a 32 bit value (up to 4 GByte) was to be able to flash 64 kByte
bootloaders with a single ISO-TP PDU. The max PDU size in the Linux kernel
implementation was set to 8200 Bytes to be able to test the length
information escape sequence.
It turns out that the demand for 64 kByte PDUs is real so the value for
MAX_MSG_LENGTH is set to 66000 to be able to potentially add some checksums
to the 65.536 Byte block.
A bisect pointed to the breakage beginning with commit 9fee28baa601 ("powerpc:
implement the new page table range API").
Analysis of the oops pointed to a struct page with a corrupted
compound_head being loaded via page_folio() -> _compound_head() in
hash_page_do_lazy_icache().
The access by the mpic code is to an MMIO address, so the expectation
is that the struct page for that address would be initialised by
init_unavailable_range(), as pointed out by Aneesh.
Instrumentation showed that was not the case, which eventually lead to
the realisation that pfn_valid() was returning false for that address,
causing the struct page to not be initialised.
Because the system is using FLATMEM, the version of pfn_valid() in
memory_model.h is used:
static inline int pfn_valid(unsigned long pfn)
{
...
return pfn >= pfn_offset && (pfn - pfn_offset) < max_mapnr;
}
Which relies on max_mapnr being initialised. Early in boot max_mapnr is
zero meaning no PFNs are valid.
max_mapnr is initialised in mem_init() called via:
Although max_mapnr is currently set in mem_init(), the value is actually
already available much earlier, as soon as mem_topology_setup() has
completed, which is also before paging_init() is called. So move the
initialisation there, which causes paging_init() to correctly initialise
the struct page and fixes the bug.
This bug seems to have been lurking for years, but went unnoticed
because the pre-folio code was inspecting the uninitialised page->flags
but not dereferencing it.
This commit fixes the smatch static checker warning in function
mlxbf_tmfifo_rxtx_word() which complains data not initialized at
line 634 when IS_VRING_DROP() is TRUE.
We don't want to use the value of ilog2(0) as dummy.buswidth is 0 when
dummy.nbytes is 0. Since we have no dummy bytes, we don't need to
configure the dummy byte bits per clock register value anyway.
ioremap_uc() is only meaningful on old x86-32 systems with the PAT
extension, and on ia64 with its slightly unconventional ioremap()
behavior, everywhere else this is the same as ioremap() anyway.
Change the only driver that still references ioremap_uc() to only do so
on x86-32/ia64 in order to allow removing that interface at some
point in the future for the other architectures.
On some architectures, ioremap_uc() just returns NULL, changing
the driver to call ioremap() means that they now have a chance
of working correctly.
Touch controllers need some time after receiving reset command for the
firmware to finish re-initializing and be ready to respond to commands
from the host. The driver already had handling for the post-reset delay
for I2C and SPI transports, this change adds the handling to
SMBus-connected devices.
SMBus devices are peculiar because they implement legacy PS/2
compatibility mode, so reset is actually issued by psmouse driver on the
associated serio port, after which the control is passed to the RMI4
driver with SMBus companion device.
Note that originally the delay was added to psmouse driver in 92e24e0e57f7 ("Input: psmouse - add delay when deactivating for SMBus
mode"), but that resulted in an unwanted delay in "fast" reconnect
handler for the serio port, so it was decided to revert the patch and
have the delay being handled in the RMI4 driver, similar to the other
transports.
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.
We fix it by calling pm_runtime_disable when error returns.
The STM32F4/7 EXTI driver was missing the xlate callback, so IRQ trigger
flags specified in the device tree were being ignored. This was
preventing the RTC alarm interrupt from working, because it must be set
to trigger on the rising edge to function correctly.
commit d61491a51f7e ("net/sched: cls_u32: Replace one-element array
with flexible-array member") incorrecly replaced an instance of
`sizeof(*tp_c)` with `struct_size(tp_c, hlist->ht, 1)`. This results
in a an over-allocation of 8 bytes.
This change is wrong because `hlist` in `struct tc_u_common` is a
pointer:
Reported-by: Alejandro Colomar <alx@kernel.org> Closes: https://lore.kernel.org/lkml/09b4a2ce-da74-3a19-6961-67883f634d98@kernel.org/ Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit in Fixes added the "NOLOAD" attribute to the .brk section as a
"failsafe" measure.
Unfortunately, this leads to the linker no longer covering the .brk
section in a program header, resulting in the kernel loader not knowing
that the memory for the .brk section must be reserved.
This has led to crashes when loading the kernel as PV dom0 under Xen,
but other scenarios could be hit by the same problem (e.g. in case an
uncompressed kernel is used and the initrd is placed directly behind
it).
So drop the "NOLOAD" attribute. This has been verified to correctly
cover the .brk section by a program header of the resulting ELF file.
driver_set_override() helper uses device_lock() so it should not be
called before rpmsg_register_device() (which calls device_register()).
Effect can be seen with CONFIG_DEBUG_MUTEXES:
Refactor the rpmsg_register_device() function to use two-step device
registering (initialization + add) and call driver_set_override() in
proper moment.
This moves the code around, so while at it also NULL-ify the
rpdev->driver_override in error path to be sure it won't be kfree()
second time.
Fixes: 42cd402b8fd4 ("rpmsg: Fix kfree() of static memory on setting driver_override") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20220429195946.1061725-2-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver_override field from platform driver should not be initialized
from static memory (string literal) because the core later kfree() it,
for example when driver_override is set via sysfs.
Use dedicated helper to set driver_override properly.
Fixes: 950a7388f02b ("rpmsg: Turn name service into a stand alone driver") Fixes: c0cdc19f84a4 ("rpmsg: Driver for user space endpoint interface") Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220419113435.246203-13-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several core drivers and buses expect that driver_override is a
dynamically allocated memory thus later they can kfree() it.
However such assumption is not documented, there were in the past and
there are already users setting it to a string literal. This leads to
kfree() of static memory during device release (e.g. in error paths or
during unbind):
kernel BUG at ../mm/slub.c:3960!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
...
(kfree) from [<c058da50>] (platform_device_release+0x88/0xb4)
(platform_device_release) from [<c0585be0>] (device_release+0x2c/0x90)
(device_release) from [<c0a69050>] (kobject_put+0xec/0x20c)
(kobject_put) from [<c0f2f120>] (exynos5_clk_probe+0x154/0x18c)
(exynos5_clk_probe) from [<c058de70>] (platform_drv_probe+0x6c/0xa4)
(platform_drv_probe) from [<c058b7ac>] (really_probe+0x280/0x414)
(really_probe) from [<c058baf4>] (driver_probe_device+0x78/0x1c4)
(driver_probe_device) from [<c0589854>] (bus_for_each_drv+0x74/0xb8)
(bus_for_each_drv) from [<c058b48c>] (__device_attach+0xd4/0x16c)
(__device_attach) from [<c058a638>] (bus_probe_device+0x88/0x90)
(bus_probe_device) from [<c05871fc>] (device_add+0x3dc/0x62c)
(device_add) from [<c075ff10>] (of_platform_device_create_pdata+0x94/0xbc)
(of_platform_device_create_pdata) from [<c07600ec>] (of_platform_bus_create+0x1a8/0x4fc)
(of_platform_bus_create) from [<c0760150>] (of_platform_bus_create+0x20c/0x4fc)
(of_platform_bus_create) from [<c07605f0>] (of_platform_populate+0x84/0x118)
(of_platform_populate) from [<c0f3c964>] (of_platform_default_populate_init+0xa0/0xb8)
(of_platform_default_populate_init) from [<c01031f8>] (do_one_initcall+0x8c/0x404)
Provide a helper which clearly documents the usage of driver_override.
This will allow later to reuse the helper and reduce the amount of
duplicated code.
Convert the platform driver to use a new helper and make the
driver_override field const char (it is not modified by the core).
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220419113435.246203-2-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Sperbeck [Sat, 28 Oct 2023 18:41:31 +0000 (18:41 +0000)]
objtool/x86: add missing embedded_insn check
When dbf460087755 ("objtool/x86: Fixup frame-pointer vs rethunk")
was backported to some stable branches, the check for dest->embedded_insn
in is_special_call() was missed. The result is that the warning it
was intended to suppress still appears. For example on 6.1 (on kernels
before 6.1, the '-s' argument would instead be 'check'):
Let's say we want to allocate 2 blocks starting from 4294966386, after
predicting the file size, start is aligned to 4294965248, len is changed
to 2048, then end = start + size = 0x100000000. Since end is of
type ext4_lblk_t, i.e. uint, end is truncated to 0.
This causes (pa->pa_lstart >= end) to always hold when checking if the
current extent to be allocated crosses already preallocated blocks, so the
resulting ac_g_ex may cross already preallocated blocks. Hence we convert
the end type to loff_t and use pa_logical_end() to avoid overflow.
When we calculate the end position of ext4_free_extent, this position may
be exactly where ext4_lblk_t (i.e. uint) overflows. For example, if
ac_g_ex.fe_logical is 4294965248 and ac_orig_goal_len is 2048, then the
computed end is 0x100000000, which is 0. If ac->ac_o_ex.fe_logical is not
the first case of adjusting the best extent, that is, new_bex_end > 0, the
following BUG_ON will be triggered:
We simply refactor the logic for adjusting the best extent by adding
a temporary ext4_free_extent ex and use extent_logical_end() to avoid
overflow, which also simplifies the code.
Cc: stable@kernel.org # 6.4 Fixes: 93cdf49f6eca ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()") Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/20230724121059.11834-3-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we use lstart + len to calculate the end of free extent or prealloc
space, it may exceed the maximum value of 4294967295(0xffffffff) supported
by ext4_lblk_t and cause overflow, which may lead to various problems.
Therefore, we add two helper functions, extent_logical_end() and
pa_logical_end(), to limit the type of end to loff_t, and also convert
lstart to loff_t for calculation to avoid overflow.
With binutils 2.26, RESERVE_BRK() causes a build failure:
/tmp/ccnGOKZ5.s: Assembler messages:
/tmp/ccnGOKZ5.s:98: Error: missing ')'
/tmp/ccnGOKZ5.s:98: Error: missing ')'
/tmp/ccnGOKZ5.s:98: Error: missing ')'
/tmp/ccnGOKZ5.s:98: Error: junk at end of line, first unrecognized
character is `U'
The problem is this line:
RESERVE_BRK(early_pgt_alloc, INIT_PGT_BUF_SIZE)
Specifically, the INIT_PGT_BUF_SIZE macro which (via PAGE_SIZE's use
_AC()) has a "1UL", which makes older versions of the assembler unhappy.
Unfortunately the _AC() macro doesn't work for inline asm.
Inline asm was only needed here to convince the toolchain to add the
STT_NOBITS flag. However, if a C variable is placed in a section whose
name is prefixed with ".bss", GCC and Clang automatically set
STT_NOBITS. In fact, ".bss..page_aligned" already relies on this trick.
So fix the build failure (and simplify the macro) by allocating the
variable in C.
Also, add NOLOAD to the ".brk" output section clause in the linker
script. This is a failsafe in case the ".bss" prefix magic trick ever
stops working somehow. If there's a section type mismatch, the GNU
linker will force the ".brk" output section to be STT_NOBITS. The LLVM
linker will fail with a "section type mismatch" error.
Note this also changes the name of the variable from .brk.##name to
__brk_##name. The variable names aren't actually used anywhere, so it's
harmless.
Fixes: a1e2c031ec39 ("x86/mm: Simplify RESERVE_BRK()") Reported-by: Joe Damato <jdamato@fastly.com> Reported-by: Byungchul Park <byungchul.park@lge.com> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Joe Damato <jdamato@fastly.com> Link: https://lore.kernel.org/r/22d07a44c80d8e8e1e82b9a806ddc8c6bbb2606e.1654759036.git.jpoimboe@kernel.org
[nathan: Fix trivial conflict due to lack of 81519f778830] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RESERVE_BRK() reserves data in the .brk_reservation section. The data
is initialized to zero, like BSS, so the macro specifies 'nobits' to
prevent the data from taking up space in the vmlinux binary. The only
way to get the compiler to do that (without putting the variable in .bss
proper) is to use inline asm.
The macro also has a hack which encloses the inline asm in a discarded
function, which allows the size to be passed (global inline asm doesn't
allow inputs).
Remove the need for the discarded function hack by just stringifying the
size rather than supplying it as an input to the inline asm.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220506121631.133110232@infradead.org
[nathan: Resolve conflict due to lack of 2b6ff7dea670] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
F2FS-fs (loop0): sanity_check_inode: inode (ino=49) extent info [5942, 4294180864, 4] is incorrect, run fsck to fix
F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=31340049, run fsck to fix.
BUG: kernel NULL pointer dereference, address: 0000000000000000
folio_mark_dirty+0x33/0x50
move_data_page+0x2dd/0x460 [f2fs]
do_garbage_collect+0xc18/0x16a0 [f2fs]
f2fs_gc+0x1d3/0xd90 [f2fs]
f2fs_balance_fs+0x13a/0x570 [f2fs]
f2fs_create+0x285/0x840 [f2fs]
path_openat+0xe6d/0x1040
do_filp_open+0xc5/0x140
do_sys_openat2+0x23a/0x310
do_sys_open+0x57/0x80
The root cause is for special file: e.g. character, block, fifo or socket file,
f2fs doesn't assign address space operations pointer array for mapping->a_ops field,
so, in a fuzzed image, SSA table indicates a data block belong to special file, when
f2fs tries to migrate that block, it causes NULL pointer access once move_data_page()
calls a_ops->set_dirty_page().
There were two places where we weren't checking for error
(e.g. ERESTARTSYS) while waiting for rdma resolution.
Addresses-Coverity: 1462165 ("Unchecked return value") Reviewed-by: Tom Talpey <tom@talpey.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Anastasia Belova <abelova@astralinux.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In kobject_get_path(), if kobj->name is changed between calls
get_kobj_path_length() and fill_kobj_path() and the length becomes
longer, then fill_kobj_path() will have an out-of-bounds bug.
The actual current problem occurs when the ixgbe probe.
In ixgbe_mii_bus_init(), if the length of netdev->dev.kobj.name
length becomes longer, out-of-bounds will occur.
cpu0 cpu1
ixgbe_probe
register_netdev(netdev)
netdev_register_kobject
device_add
kobject_uevent // Sending ADD events
systemd-udevd // rename netdev
dev_change_name
device_rename
kobject_rename
ixgbe_mii_bus_init |
mdiobus_register |
__mdiobus_register |
device_register |
device_add |
kobject_uevent |
kobject_get_path |
len = get_kobj_path_length // old name |
path = kzalloc(len, gfp_mask); |
kobj->name = name;
/* name length becomes
* longer
*/
fill_kobj_path /* kobj path length is
* longer than path,
* resulting in out of
* bounds when filling path
*/
This is the kasan report:
==================================================================
BUG: KASAN: slab-out-of-bounds in fill_kobj_path+0x50/0xc0
Write of size 7 at addr ff1100090573d1fd by task kworker/28:1/673
David and a few others reported that on certain newer systems some legacy
interrupts fail to work correctly.
Debugging revealed that the BIOS of these systems leaves the legacy PIC in
uninitialized state which makes the PIC detection fail and the kernel
switches to a dummy implementation.
Unfortunately this fallback causes quite some code to fail as it depends on
checks for the number of legacy PIC interrupts or the availability of the
real PIC.
In theory there is no reason to use the PIC on any modern system when
IO/APIC is available, but the dependencies on the related checks cannot be
resolved trivially and on short notice. This needs lots of analysis and
rework.
The PIC detection has been added to avoid quirky checks and force selection
of the dummy implementation all over the place, especially in VM guest
scenarios. So it's not an option to revert the relevant commit as that
would break a lot of other scenarios.
One solution would be to try to initialize the PIC on detection fail and
retry the detection, but that puts the burden on everything which does not
have a PIC.
Fortunately the ACPI/MADT table header has a flag field, which advertises
in bit 0 that the system is PCAT compatible, which means it has a legacy
8259 PIC.
Evaluate that bit and if set avoid the detection routine and keep the real
PIC installed, which then gets initialized (for nothing) and makes the rest
of the code with all the dependencies work again.
Fixes: e179f6914152 ("x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately") Reported-by: David Lazar <dlazar@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: David Lazar <dlazar@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Cc: stable@vger.kernel.org Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218003 Link: https://lore.kernel.org/r/875y2u5s8g.ffs@tglx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the probe function, the driver was reading out the thresholds already
set in the core, which can be configured by the user in the Vivado tools
when the FPGA image is built. However, it later clobbered those values
with zero or maximum values. In particular, the overtemperature shutdown
threshold register was overwritten with the max value, which effectively
prevents the FPGA from shutting down when the desired threshold was
eached, potentially risking hardware damage in that case.
Remove this code to leave the preconfigured default threshold values
intact.
The code was also disabling all alarms regardless of what enable state
they were left in by the FPGA image, including the overtemperature
shutdown feature. Leave these bits in their original state so they are
not unconditionally disabled.
In order to simplify resource management and error paths in probe() and
entirely drop the remove() callback - use devres helpers wherever
possible. Define devm actions for cancelling the delayed work and
disabling the clock.
In the possible_parent_show function, ensure proper handling of the return
value from of_clk_get_parent_name to prevent potential issues arising from
a NULL return.
The current implementation invokes seq_puts directly on the result of
of_clk_get_parent_name without verifying the return value, which can lead
to kernel panic if the function returns NULL.
This patch addresses the concern by introducing a check on the return
value of of_clk_get_parent_name. If the return value is not NULL, the
function proceeds to call seq_puts, providing the returned value as
argument.
However, if of_clk_get_parent_name returns NULL, the function provides a
static string as argument, avoiding the panic.
Fixes: 1ccc0ddf046a ("clk: Use seq_puts() in possible_parent_show()") Reported-by: Philip Daly <pdaly@redhat.com> Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com> Link: https://lore.kernel.org/r/20230921073217.572151-1-alessandro.carminati@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fault handler used to make non-trivial calls, so it needed
to set a stack frame up. Used to be
save ... - grab a stack frame, old %o... become %i...
....
ret - go back to address originally in %o7, currently %i7
restore - switch to previous stack frame, in delay slot
Non-trivial calls had been gone since ab5e8b331244 and that code should
have become
retl - go back to address in %o7
clr %o0 - have return value set to 0
What it had become instead was
ret - go back to address in %i7 - return address of *caller*
clr %o0 - have return value set to 0
which is not good, to put it mildly - we forcibly return 0 from
csum_and_copy_{from,to}_iter() (which is what the call of that
thing had been inlined into) and do that without dropping the
stack frame of said csum_and_copy_..._iter(). Confuses the
hell out of the caller of csum_and_copy_..._iter(), obviously...
Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Fixes: ab5e8b331244 "sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic()" Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With current design, buffers and dma handles are not freed in case
of remote invocation failures returned from DSP. This could result
in buffer leakings and dma handle pointing to wrong memory in the
fastrpc kernel. Adding changes to clean buffers and dma handles
even when remote invocation to DSP returns failures.
kernel/trace/trace_kprobe.c:1029: warning: Excess function parameter 'args' description in '__kprobe_event_gen_cmd_start'
kernel/trace/trace_kprobe.c:1097: warning: Excess function parameter 'args' description in '__kprobe_event_add_fields'
Refer to the usage of variable length arguments elsewhere in the kernel
code, "@..." is the proper way to express it in the description.
When the `CONFIG_I2C_SLAVE` option is enabled and the device operates
as a slave, a situation arises where the master sends a START signal
without the accompanying STOP signal. This action results in a
persistent I2C bus timeout. The core issue stems from the fact that
the i2c controller remains in a slave read state without a timeout
mechanism. As a consequence, the bus perpetually experiences timeouts.
In this case, the i2c bus will be reset, but the slave_state reset is
missing.
Fixes: fee465150b45 ("i2c: aspeed: Reset the i2c controller when timeout occurs") Signed-off-by: Jian Zhang <zhangjian.3032@bytedance.com> Acked-by: Andi Shyti <andi.shyti@kernel.org> Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of SMBUS byte read with PEC enabled, the whole transfer
is split into two commands. A first write command, followed by
a read command. The write command does not have any PEC byte
and a PEC byte is appended at the end of the read command.
(cf Read byte protocol with PEC in SMBUS specification)
Within the STM32 I2C controller, handling (either sending
or receiving) of the PEC byte is done via the PECBYTE bit in
register CR2.
Currently, the PECBYTE is set at the beginning of a transfer,
which lead to sending a PEC byte at the end of the write command
(hence losing the real last byte), and also does not check the
PEC byte received during the read command.
This patch corrects the function stm32f7_i2c_smbus_xfer_msg
in order to only set the PECBYTE during the read command.
i2c-demux-pinctrl uses the pair of_find_i2c_adapter_by_node() /
i2c_put_adapter(). These pair alone is not correct to properly lock the
I2C parent adapter.
Indeed, i2c_put_adapter() decrements the module refcount while
of_find_i2c_adapter_by_node() does not increment it. This leads to an
underflow of the parent module refcount.
Use the dedicated function, of_get_i2c_adapter_by_node(), to handle
correctly the module refcount.
Fixes: 50a5ba876908 ("i2c: mux: demux-pinctrl: add driver") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Cc: stable@vger.kernel.org Acked-by: Peter Rosin <peda@axentia.se> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c-mux-gpmux uses the pair of_find_i2c_adapter_by_node() /
i2c_put_adapter(). These pair alone is not correct to properly lock the
I2C parent adapter.
Indeed, i2c_put_adapter() decrements the module refcount while
of_find_i2c_adapter_by_node() does not increment it. This leads to an
underflow of the parent module refcount.
Use the dedicated function, of_get_i2c_adapter_by_node(), to handle
correctly the module refcount.
Fixes: ac8498f0ce53 ("i2c: i2c-mux-gpmux: new driver") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Cc: stable@vger.kernel.org Acked-by: Peter Rosin <peda@axentia.se> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c-mux-pinctrl uses the pair of_find_i2c_adapter_by_node() /
i2c_put_adapter(). These pair alone is not correct to properly lock the
I2C parent adapter.
Indeed, i2c_put_adapter() decrements the module refcount while
of_find_i2c_adapter_by_node() does not increment it. This leads to an
underflow of the parent module refcount.
Use the dedicated function, of_get_i2c_adapter_by_node(), to handle
correctly the module refcount.
Fixes: c4aee3e1b0de ("i2c: mux: pinctrl: remove platform_data") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Cc: stable@vger.kernel.org Acked-by: Peter Rosin <peda@axentia.se> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Second interrupt is needed only when touchscreen mode is used, so don't
request it unconditionally. This removes the following annoying warning
during boot:
exynos-adc 14d10000.adc: error -ENXIO: IRQ index 1 not found
when the checked address is illegal,the corresponding shadow address from
kasan_mem_to_shadow may have no mapping in mmu table. Access such shadow
address causes kernel oops. Here is a sample about oops on arm64(VA
39bit) with KASAN_SW_TAGS and KASAN_OUTLINE on:
The I40E_TXR_FLAGS_WB_ON_ITR is i40e_ring flag and not i40e_pf one.
Fixes: 8e0764b4d6be42 ("i40e/i40evf: Add support for writeback on ITR feature for X722") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231023212714.178032-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit fix wrong RTO timeout when received SACK reneging.
When an ACK arrived pointing to a SACK reneging, tcp_check_sack_reneging()
will rearm the RTO timer for min(1/2*srtt, 10ms) into to the future.
But since the commit 62d9f1a6945b ("tcp: fix TLP timer not set when
CA_STATE changes from DISORDER to OPEN") merged, the tcp_set_xmit_timer()
is moved after tcp_fastretrans_alert()(which do the SACK reneging check),
so the RTO timeout will be overwrited by tcp_set_xmit_timer() with
icsk_rto instead of 1/2*srtt.
Here is a packetdrill script to check this bug:
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
// we expect rto fired in 1/2*srtt (50ms)
+.05 > . 1001:2001(1000) ack 1
This fix remove the FLAG_SET_XMIT_TIMER from ack_flag when
tcp_check_sack_reneging() set RTO timer with 1/2*srtt to avoid
being overwrited later.
Fixes: 62d9f1a6945b ("tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN") Signed-off-by: Fred Chen <fred.chenchen03@gmail.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The error handling in rtl8152_probe() is missing a call to release
firmware. Add it in to match what's in the cleanup code in
rtl8152_disconnect().
Fixes: 9370f2d05a2a ("r8152: support request_firmware for RTL8153") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The error handling in rtl8152_probe() is missing a call to cancel the
hw_phy_work. Add it in to match what's in the cleanup code in
rtl8152_disconnect().
Fixes: a028a9e003f2 ("r8152: move the settings of PHY to a work queue") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The rtl8152_probe() function lacks a call to the chip-specific
unload() routine when it sees an error in probe. Add it in to match
the cleanup code in rtl8152_disconnect().
Fixes: ac718b69301c ("net/usb: new driver for RTL8152") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to the comment next to USB_CTRL_GET_TIMEOUT and
USB_CTRL_SET_TIMEOUT, although sending/receiving control messages is
usually quite fast, the spec allows them to take up to 5 seconds.
Let's increase the timeout in the Realtek driver from 500ms to 5000ms
(using the #defines) to account for this.
This is not just a theoretical change. The need for the longer timeout
was seen in testing. Specifically, if you drop a sc7180-trogdor based
Chromebook into the kdb debugger and then "go" again after sitting in
the debugger for a while, the next USB control message takes a long
time. Out of ~40 tests the slowest USB control message was 4.5
seconds.
While dropping into kdb is not exactly an end-user scenario, the above
is similar to what could happen due to an temporary interrupt storm,
what could happen if there was a host controller (HW or SW) issue, or
what could happen if the Realtek device got into a confused state and
needed time to recover.
This change is fairly critical since the r8152 driver in Linux doesn't
expect register reads/writes (which are backed by USB control
messages) to fail.
Fixes: ac718b69301c ("net/usb: new driver for RTL8152") Suggested-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Local variable buf.i225 created at:
smsc95xx_read_reg drivers/net/usb/smsc95xx.c:90 [inline]
smsc95xx_reset+0x203/0x25f0 drivers/net/usb/smsc95xx.c:892
smsc95xx_bind+0x9bc/0x22e0 drivers/net/usb/smsc95xx.c:1131
CPU: 1 PID: 773 Comm: kworker/1:2 Not tainted 6.6.0-rc1-syzkaller-00125-ge42bebf6db29 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023
Workqueue: usb_hub_wq hub_event
=====================================================
Similar to e9c65989920f ("net: usb: smsc75xx: Fix uninit-value access in
__smsc75xx_read_reg"), this issue is caused because usbnet_read_cmd() reads
less bytes than requested (zero byte in the reproducer). In this case,
'buf' is not properly filled.
This patch fixes the issue by returning -ENODATA if usbnet_read_cmd() reads
less bytes than requested.
sysbot reported similar uninit-value access issue [2]. The root cause is
the same as mentioned above, and this patch addresses it as well.
Fixes: 2f7ca802bdae ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver") Reported-and-tested-by: syzbot+c74c24b43c9ae534f0e0@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+2c97a98a5ba9ea9c23bd@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c74c24b43c9ae534f0e0 [1] Closes: https://syzkaller.appspot.com/bug?extid=2c97a98a5ba9ea9c23bd [2] Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
strncat() usage in adf7242_debugfs_init() is wrong.
The size given to strncat() is the maximum number of bytes that can be
written, excluding the trailing NULL.
Here, the size that is passed, DNAME_INLINE_LEN, does not take into account
the size of "adf7242-" that is already in the array.
In order to fix it, use snprintf() instead.
Fixes: 7302b9d90117 ("ieee802154/adf7242: Driver for ADF7242 MAC IEEE802154") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The 'ethtool_convert_link_mode_to_legacy_u32' method does not allow us to
advertise 2500M speed support and TP (twisted pair) properly. Convert to
'ethtool_link_ksettings_test_link_mode' to advertise supported speed and
eliminate ambiguity.
Add check for return of igb_update_ethtool_nfc_entry so that in case
of any potential errors the memory alocated for input will be freed.
Fixes: 0e71def25281 ("igb: add support of RX network flow classification") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
==================================================================
BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169
race at unknown origin, with read to 0xffff888117e43510 of 4 bytes by interrupt on cpu 21:
rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169
__napi_poll (net/core/dev.c:6527)
net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727)
__do_softirq (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632)
irq_exit_rcu (kernel/softirq.c:647)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14))
asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645)
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291)
cpuidle_enter (drivers/cpuidle/cpuidle.c:390)
call_cpuidle (kernel/sched/idle.c:135)
do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282)
cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433)
value changed: 0x80003fff -> 0x3402805f
Reported by Kernel Concurrency Sanitizer on:
CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 #41
Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023
==================================================================
drivers/net/ethernet/realtek/r8169_main.c:
==========================================
4429
→ 4430 status = le32_to_cpu(desc->opts1);
4431 if (status & DescOwn)
4432 break;
4433
4434 /* This barrier is needed to keep us from reading
4435 * any other fields out of the Rx descriptor until
4436 * we know the status of DescOwn
4437 */
4438 dma_rmb();
4439
4440 if (unlikely(status & RxRES)) {
4441 if (net_ratelimit())
4442 netdev_warn(dev, "Rx ERROR. status = %08x\n",
Marco Elver explained that dma_rmb() doesn't prevent the compiler to tear up the access to
desc->opts1 which can be written to concurrently. READ_ONCE() should prevent that from
happening:
4429
→ 4430 status = le32_to_cpu(READ_ONCE(desc->opts1));
4431 if (status & DescOwn)
4432 break;
4433
As the consequence of this fix, this KCSAN warning was eliminated.
Fixes: 6202806e7c03a ("r8169: drop member opts1_mask from struct rtl8169_private") Suggested-by: Marco Elver <elver@google.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: nic_swsd@realtek.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.hr/ Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Acked-by: Marco Elver <elver@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
As drm_dp_get_mst_branch_device_by_guid() is called from
drm_dp_get_mst_branch_device_by_guid(), mstb parameter has to be checked,
otherwise NULL dereference may occur in the call to
the memcpy() and cause following:
As get_mst_branch_device_by_guid_helper() is recursive, moving condition
to the first line allow to remove a similar one for step over of NULL elements
inside a loop.
Fixes: 5e93b8208d3c ("drm/dp/mst: move GUID storage from mgr, port to only mst branch") Cc: <stable@vger.kernel.org> # 4.14+ Signed-off-by: Lukasz Majczak <lma@semihalf.com> Reviewed-by: Radoslaw Biernacki <rad@chromium.org> Signed-off-by: Manasi Navare <navaremanasi@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230922063410.23626-1-lma@semihalf.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Populate the new member for custom mask values to make sure this value
is applied whenever needed. Also, rename the define holding the value
because this is not only about initialization anymore.
When guard page debug is enabled and set_page_guard returns success, we
miss to forward page to point to start of next split range and we will do
split unexpectedly in page range without target page. Move start page
update before set_page_guard to fix this.
As we split to wrong target page, then splited pages are not able to merge
back to original order when target page is put back and splited pages
except target page is not usable. To be specific:
Consider target page is the third page in buddy page with order 2.
| buddy-2 | Page | Target | Page |
After break down to target page, we will only set first page to Guard
because of bug.
| Guard | Page | Target | Page |
When we try put_page_back_buddy with target page, the buddy page of target
if neither guard nor buddy, Then it's not able to construct original page
with order 2
| Guard | Page | buddy-0 | Page |
All pages except target page is not in free list and is not usable.
Link: https://lkml.kernel.org/r/20230927094401.68205-1-shikemeng@huaweicloud.com Fixes: 06be6ff3d2ec ("mm,hwpoison: rework soft offline for free pages") Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the recent removal of vm_dev from devres its memory is only freed
via the callback virtio_mmio_release_dev. However, this only takes
effect after device_add is called by register_virtio_device. Until then
it's an unmanaged resource and must be explicitly freed on error exit.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Cc: stable@vger.kernel.org Fixes: 55c91fedd03d ("virtio-mmio: don't break lifecycle of vm_dev") Signed-off-by: Maximilian Heyne <mheyne@amazon.de> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20230911090328.40538-1-mheyne@amazon.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The deflation request to the target, which isn't unaligned to the
guest page size causes endless deflation and inflation actions. For
example, we receive the flooding QMP events for the changes on memory
balloon's size after a deflation request to the unaligned target is
sent for the ARM64 guest, where we have 64KB base page size.
Fix it by aligning the target up to the guest page size, 64KB in this
specific case. With this applied, no flooding QMP events are observed
and the memory balloon's size can be stablizied to 0x3ffe0000 soon
after the deflation request is sent.
mcb-lpc requests a fixed-size memory region to parse the chameleon
table, however, if the chameleon table is smaller that the allocated
region, it could overlap with the IP Cores' memory regions.
After parsing the chameleon table, drop/reallocate the memory region
with the actual chameleon table size.
The function chameleon_parse_cells() returns the number of cells
parsed which has an undetermined size. This return value is only
used for error checking but the number of cells is never used.
Change return value to be number of bytes parsed to allow for
memory management improvements.
If name_show() is non unique, this test will try to install a kprobe on this
function which should fail returning EADDRNOTAVAIL.
On kernel where name_show() is not unique, this test is skipped.
There are race conditions that may lead to inet6_dev refcount underflow
in xfrm6_dst_destroy() and rt6_uncached_list_flush_dev().
One of the refcount underflow bugs is shown below:
(cpu 1) | (cpu 2)
xfrm6_dst_destroy() |
... |
in6_dev_put() |
| rt6_uncached_list_flush_dev()
... | ...
| in6_dev_put()
rt6_uncached_list_del() | ...
... |
xfrm6_dst_destroy() calls rt6_uncached_list_del() after in6_dev_put(),
so rt6_uncached_list_flush_dev() has a chance to call in6_dev_put()
again for the same inet6_dev.
Fix it by moving in6_dev_put() after rt6_uncached_list_del() in
xfrm6_dst_destroy().
The code pattern of memcpy(dst, src, strlen(src)) is almost always
wrong. In this case it is wrong because it leaves memory uninitialized
if it is less than sizeof(ni->name), and overflows ni->name when longer.
Normally strtomem_pad() could be used here, but since ni->name is a
trailing array in struct hci_mon_new_index, compilers that don't support
-fstrict-flex-arrays=3 can't tell how large this array is via
__builtin_object_size(). Instead, open-code the helper and use sizeof()
since it will work correctly.
Additionally mark ni->name as __nonstring since it appears to not be a
%NUL terminated C string.
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Edward AD <twuufnxlz@gmail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: linux-bluetooth@vger.kernel.org Cc: netdev@vger.kernel.org Fixes: 18f547f3fc07 ("Bluetooth: hci_sock: fix slab oob read in create_monitor_event") Link: https://lore.kernel.org/lkml/202310110908.F2639D3276@keescook/ Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks like the driver sleep pins configuration is unusable. Adding the
sleep pins causes the usb phy to not respond. We need to use the default
pins in probe, and only set sleep pins at phy_mdm6600_device_power_off().
As the modem can also be booted to a serial port mode for firmware
flashing, let's make the pin changes limited to probe and remove. For
probe, we get the default pins automatically. We only need to set the
sleep pins in phy_mdm6600_device_power_off() to prevent the modem from
waking up because the gpio line glitches.
If it turns out that we need a separate state for phy_mdm6600_power_on()
and phy_mdm6600_power_off(), we can use the pinctrl idle state.
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Fixes: 2ad2af081622 ("phy: mapphone-mdm6600: Improve phy related runtime PM calls") Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20230913060433.48373-3-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit d644e0d79829 ("phy: mapphone-mdm6600: Fix PM error handling in
phy_mdm6600_probe") caused a regression where we now unconditionally
disable runtime PM at the end of the probe while it is only needed on
errors.
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Miaoqian Lin <linmq006@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Fixes: d644e0d79829 ("phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe") Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230913060433.48373-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Free the "priv" pointer before returning the error code.
Fixes: 90eb6b59d311 ("ASoC: pxa-ssp: add support for an external clock in devicetree") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/84ac2313-1420-471a-b2cb-3269a2e12a7c@moroto.mountain Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / linux-stable / log