[WHY]
Currently, when insert_plane is called with insert_above_mpcc
parameter that is equal to tree->opp_list, the function returns NULL.
[HOW]
Instead, the function should insert the plane at the top of the tree.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wesley Chalmers <wesley.chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have originally guarded fiddling with CHECKFLAGS in our arch Makefile
by checking for the CONFIG_MIPS variable, not set for targets such as
`distclean', etc. that neither include `.config' nor use the compiler.
Starting from commit 805b2e1d427a ("kbuild: include Makefile.compiler
only when compiler is needed") we have had a generic `need-compiler'
variable explicitly telling us if the compiler will be used and thus its
capabilities need to be checked and expressed in the form of compilation
flags. If this variable is not set, then `make' functions such as
`cc-option' are undefined, causing all kinds of weirdness to happen if
we expect specific results to be returned, most recently:
cc1: error: '-mloongson-mmi' must be used with '-mhard-float'
messages with configurations such as `fuloong2e_defconfig' and the
`modules_install' target, which does include `.config' and yet does not
use the compiler.
Replace the check for CONFIG_MIPS with one for `need-compiler' instead,
so as to prevent the compiler from being ever called for CHECKFLAGS when
not needed.
Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com> Closes: https://lore.kernel.org/r/85031c0c-d981-031e-8a50-bc4fad2ddcd8@collabora.com/ Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 805b2e1d427a ("kbuild: include Makefile.compiler only when compiler is needed") Cc: stable@vger.kernel.org # v5.13+ Reported-by: "kernelci.org bot" <bot@kernelci.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzkaller found a memory leak in kcm_sendmsg(), and commit c821a88bd720
("kcm: Fix memory leak in error path of kcm_sendmsg()") suppressed it by
updating kcm_tx_msg(head)->last_skb if partial data is copied so that the
following sendmsg() will resume from the skb.
However, we cannot know how many bytes were copied when we get the error.
Thus, we could mess up the MSG_MORE queue.
When kcm_sendmsg() fails for SOCK_DGRAM, we should purge the queue as we
do so for UDP by udp_flush_pending_frames().
Even without this change, when the error occurred, the following sendmsg()
resumed from a wrong skb and the queue was messed up. However, we have
yet to get such a report, and only syzkaller stumbled on it. So, this
can be changed safely.
Note this does not change SOCK_SEQPACKET behaviour.
The commit in fixes introduced flags to control the status of hardware
configuration while processing packets. At the same time another structure
is used to provide configuration of timestamper to user-space applications.
The way it was coded makes this structures go out of sync easily. The
repro is easy for 82599 chips:
The eth0 device is properly configured to timestamp any PTPv2 events.
[root@hostname ~]# hwstamp_ctl -i eth0 -r 1 -t 1
current settings:
tx_type 1
rx_filter 12
SIOCSHWTSTAMP failed: Numerical result out of range
The requested time stamping mode is not supported by the hardware.
The error is properly returned because HW doesn't support all packets
timestamping. But the adapter->flags is cleared of timestamp flags
even though no HW configuration was done. From that point no RX timestamps
are received by user-space application. But configuration shows good
values:
Fix the issue by applying new flags only when the HW was actually
configured.
Fixes: a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices") Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
I got the below warning when do fuzzing test:
BUG: KASAN: null-ptr-deref in scatterwalk_copychunks+0x320/0x470
Read of size 4 at addr 0000000000000008 by task kworker/u8:1/9
This is because the value of rec_seq of tls_crypto_info configured by the
user program is too large, for example, 0xffffffffffffff. In addition, TLS
is asynchronously accelerated. When tls_do_encryption() returns
-EINPROGRESS and sk->sk_err is set to EBADMSG due to rec_seq overflow,
skmsg is released before the asynchronous encryption process ends. As a
result, the UAF problem occurs during the asynchronous processing of the
encryption module.
If the operation is asynchronous and the encryption module returns
EINPROGRESS, do not free the record information.
Fixes: 635d93981786 ("net/tls: free record only on encryption error") Signed-off-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/20230909081434.2324940-1-liujian56@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This fix involves 2 changes:
- All event regs have a reset value of 0, which is not a valid
event_number as per the event_list for most blocks and hence seen
as an error. Add a "disable" event with event_number 0 for all blocks.
- The enable bit for each counter need not be checked before
reading the event info, and hence removed.
This commit fixes tmfifo console stuck issue when the virtual
networking interface is in down state. In such case, the network
Rx descriptors runs out and causes the Rx network packet staying
in the head of the tmfifo thus blocking the console packets. The
fix is to drop the Rx network packet when no more Rx descriptors.
Function name mlxbf_tmfifo_release_pending_pkt() is also renamed
to mlxbf_tmfifo_release_pkt() to be more approperiate.
Fixes: 1357dfd7261f ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc") Signed-off-by: Liming Sun <limings@nvidia.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/8c0177dc938ae03f52ff7e0b62dbeee74b7bec09.1693322547.git.limings@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In kcm_sendmsg(), kcm_tx_msg(head)->last_skb is used as a cursor to append
newly allocated skbs to 'head'. If some bytes are copied, an error occurred,
and jumped to out_error label, 'last_skb' is left unmodified. A later
kcm_sendmsg() will use an obsoleted 'last_skb' reference, corrupting the
'head' frag_list and causing the leak.
This patch fixes this issue by properly updating the last allocated skb in
'last_skb'.
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Reported-and-tested-by: syzbot+6f98de741f7dbbfc4ccb@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6f98de741f7dbbfc4ccb Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to the document of napi, there is no rx process when the
budget is 0. Therefore, r8152_poll() has to return 0 directly when the
budget is equal to 0.
Fixes: d2187f8e4454 ("r8152: divide the tx and rx bottom functions") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 4d9423549501 ("net: dsa: sja1105: offload bridge port flags to
device") has partially hidden some multicast entries from showing up in
the "bridge fdb show" output, but it wasn't enough. Addresses which are
added through "bridge mdb add" still show up. Hide them all.
Fixes: 291d1e72b756 ("net: dsa: sja1105: Add support for FDB and MDB management") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
rule_locs is allocated in ethtool_get_rxnfc and the size is determined by
rule_cnt from user space. So rule_cnt needs to be check before using
rule_locs to avoid NULL pointer dereference.
Fixes: 7aab747e5563 ("net: ethernet: mediatek: add ethtool functions to configure RX flows of HW LRO") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
rules is allocated in ethtool_get_rxnfc and the size is determined by
rule_cnt from user space. So rule_cnt needs to be check before using
rules to avoid OOB writing or NULL pointer dereference.
Fixes: 90b509b39ac9 ("net: mvpp2: cls: Add Classification offload support") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Reviewed-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
While doing smcr_port_add, there maybe linkgroup add into or delete
from smc_lgr_list.list at the same time, which may result kernel crash.
So, use smc_lgr_list.lock to protect smc_lgr_list.list iterate in
smcr_port_add.
Fixes: 1f90a05d9ff9 ("net/smc: add smcr_port_add() and smcr_link_up() processing") Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Timeouts in kselftest are done using the "timeout" command with the
"--foreground" option. Without the "foreground" option, it is not
possible for a user to cancel the runner using SIGINT, because the
signal is not propagated to timeout which is running in a different
process group. The "forground" options places the timeout in the same
process group as its parent, but only sends the SIGTERM (on timeout)
signal to the forked process. Unfortunately, this does not play nice
with all kselftests, e.g. "net:fcnal-test.sh", where the child
processes will linger because timeout does not send SIGTERM to the
group.
Some users have noted these hangs [1].
Fix this by nesting the timeout with an additional timeout without the
foreground option.
Link: https://lore.kernel.org/all/7650b2eb-0aee-a2b0-2e64-c9bc63210f67@alu.unizg.hr/ Fixes: 651e0d881461 ("kselftest/runner: allow to properly deliver signals to tests") Signed-off-by: Björn Töpel <bjorn@rivosinc.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
I got the below warning when do fuzzing test:
unregister_netdevice: waiting for bond0 to become free. Usage count = 2
It can be repoduced via:
ip link add bond0 type bond
sysctl -w net.ipv4.conf.bond0.promote_secondaries=1
ip addr add 4.117.174.103/0 scope 0x40 dev bond0
ip addr add 192.168.100.111/255.255.255.254 scope 0 dev bond0
ip addr add 0.0.0.4/0 scope 0x40 secondary dev bond0
ip addr del 4.117.174.103/0 scope 0x40 dev bond0
ip link delete bond0 type bond
In this reproduction test case, an incorrect 'last_prim' is found in
__inet_del_ifa(), as a result, the secondary address(0.0.0.4/0 scope 0x40)
is lost. The memory of the secondary address is leaked and the reference of
in_device and net_device is leaked.
Fix this problem:
Look for 'last_prim' starting at location of the deleted IP and inserting
the promoted IP into the location of 'last_prim'.
Fixes: 0ff60a45678e ("[IPV4]: Fix secondary IP addresses after promotion") Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The previous values were completely bogus, and resulted in the computed
DPI ratio being much lower than reality, causing applications and UIs to
misbehave.
The new values were measured by myself with a ruler.
Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Sam Ravnborg <sam@ravnborg.org> Fixes: 8620cc2f99b7 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2") Cc: <stable@vger.kernel.org> # v5.8+ Link: https://lore.kernel.org/r/20230714153720.336990-1-paul@crapouillou.net Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit a33df75c6328 ("block: use an xarray for disk->part_tbl") remove
disk_expand_part_tbl() in add_partition(), which means all kinds of
devices will support extended dynamic `dev_t`.
However, some devices with GENHD_FL_NO_PART are not expected to add or
resize partition.
Fix this by adding check of GENHD_FL_NO_PART before add or resize
partition.
Fixes: a33df75c6328 ("block: use an xarray for disk->part_tbl") Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230831075900.1725842-1-lilingfeng@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
GENHD_FL_BLOCK_EVENTS_ON_EXCL_WRITE is all about the event reporting
mechanism, so move it to the event_flags field.
Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211122130625.1136848-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 1a721de8489f ("block: don't add or resize partition on the disk with GENHD_FL_NO_PART") Signed-off-by: Sasha Levin <sashal@kernel.org>
The flag to indicate an unlocked native capacity is dynamic state,
not a driver capability flag, so move it to disk->state.
Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211122130625.1136848-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 1a721de8489f ("block: don't add or resize partition on the disk with GENHD_FL_NO_PART") Signed-off-by: Sasha Levin <sashal@kernel.org>
Refactor the pcd initialization to have a dedicated helper to initialize
a single disk.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 1a721de8489f ("block: don't add or resize partition on the disk with GENHD_FL_NO_PART") Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 1a721de8489f ("block: don't add or resize partition on the disk with GENHD_FL_NO_PART") Signed-off-by: Sasha Levin <sashal@kernel.org>
The 'e' key is to toggle expand/collapse the selected entry only. But
the current code has a bug that it only increases the number of entries
by 1 in the hierarchy mode so users cannot move under the current entry
after the key stroke. This is due to a wrong assumption in the
hist_entry__set_folding().
The commit b33f922651011eff ("perf hists browser: Put hist_entry folding
logic into single function") factored out the code, but actually it
should be handled separately. The hist_browser__set_folding() is to
update fold state for each entry so it needs to traverse all (child)
entries regardless of the current fold state. So it increases the
number of entries by 1.
But the hist_entry__set_folding() only cares the currently selected
entry and its all children. So it should count all unfolded child
entries. This code is implemented in hist_browser__toggle_fold()
already so we can just call it.
Fixes: b33f922651011eff ("perf hists browser: Put hist_entry folding logic into single function") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230731094934.1616495-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PERF_RECORD_ATTR is used for a pipe mode to describe an event with
attribute and IDs. The ID table comes after the attr and it calculate
size of the table using the total record size and the attr size.
This is fine for most use cases, but sometimes it saves the pipe output
in a file and then process it later. And it becomes a problem if there
is a change in attr size between the record and report.
$ perf record -o- > perf-pipe.data # old version
$ perf report -i- < perf-pipe.data # new version
For example, if the attr size is 128 and it has 4 IDs, then it would
save them in 168 byte like below:
The commit ef9ff6017e3c4593 ("perf ui browser: Move the extra title
lines from the hists browser") introduced ui_browser__gotorc_title() to
help moving non-title lines easily. But it missed to update the title
for the hierarchy mode so it won't print the header line on TUI at all.
$ perf report --hierarchy
Fixes: ef9ff6017e3c4593 ("perf ui browser: Move the extra title lines from the hists browser") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230731094934.1616495-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove a build-time check for the presence of the GCC `-msym32' option.
This option has been there since GCC 4.1.0, which is below the minimum
required as at commit 805b2e1d427a ("kbuild: include Makefile.compiler
only when compiler is needed"), when an error message:
arch/mips/Makefile:306: *** CONFIG_CPU_DADDI_WORKAROUNDS unsupported without -msym32. Stop.
started to trigger for the `modules_install' target with configurations
such as `decstation_64_defconfig' that set CONFIG_CPU_DADDI_WORKAROUNDS,
because said commit has made `cc-option-yn' an undefined function for
non-build targets.
Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 805b2e1d427a ("kbuild: include Makefile.compiler only when compiler is needed") Cc: stable@vger.kernel.org # v5.13+ Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are two places in apply_below_the_range() where it's possible for
a divide by zero error to occur. So, to fix this make sure the divisor
is non-zero before attempting the computation in both cases.
If system is busy during the command status polling function, the driver
may not get the chance to poll the status register till the end of time
out and return the premature status. Do a final check after time out
happens to ensure reading the correct status.
When the oob buffer length is not in multiple of words, the oob write
function does out-of-bounds read on the oob source buffer at the last
iteration. Fix that by always checking length limit on the oob buffer
read and fill with 0xff when reaching the end of the buffer to the oob
registers.
When executing a NAND command within the panic write path, wait for any
pending command instead of calling BUG_ON to avoid crashing while
already crashing.
And
check_dev_super()
btrfs_validate_super(.., sb, ..)
However, it currently verifies the fs_info::super_copy::fsid instead,
which is not correct. Fix this using the correct fsid in the superblock
argument.
CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When joining a transaction with TRANS_JOIN_NOSTART, if we don't find a
running transaction we end up creating one. This goes against the purpose
of TRANS_JOIN_NOSTART which is to join a running transaction if its state
is at or below the state TRANS_STATE_COMMIT_START, otherwise return an
-ENOENT error and don't start a new transaction. So fix this to not create
a new transaction if there's no running transaction at or below that
state.
CC: stable@vger.kernel.org # 4.14+ Fixes: a6d155d2e363 ("Btrfs: fix deadlock between fiemap and transaction commits") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we do a write whose bio suffers an error, we will never reclaim the
qgroup reserved space for it. We allocate the space in the write_iter
codepath, then release the reservation as we allocate the ordered
extent, but we only create a delayed ref if the ordered extent finishes.
If it has an error, we simply leak the rsv. This is apparent in running
any error injecting (dmerror) fstests like btrfs/146 or btrfs/160. Such
tests fail due to dmesg on umount complaining about the leaked qgroup
data space.
When we clean up other aspects of space on failed ordered_extents, also
free the qgroup rsv.
Reviewed-by: Josef Bacik <josef@toxicpanda.com> CC: stable@vger.kernel.org # 5.10+ Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During our debugging of glusterfs, we found an Assertion failed error:
inode_lookup >= nlookup, which was caused by the nlookup value in the
kernel being greater than that in the FUSE file system.
The issue was introduced by fuse_direntplus_link, where in the function,
fuse_iget increments nlookup, and if d_splice_alias returns failure,
fuse_direntplus_link returns failure without decrementing nlookup
https://github.com/gluster/glusterfs/pull/4081
With commit 44b1fbc0f5f3 ("m68k/q40: Replace q40ide driver
with pata_falcon and falconide"), the Q40 IDE driver was
replaced by pata_falcon.c.
Both IO and memory resources were defined for the Q40 IDE
platform device, but definition of the IDE register addresses
was modeled after the Falcon case, both in use of the memory
resources and in including register shift and byte vs. word
offset in the address.
This was correct for the Falcon case, which does not apply
any address translation to the register addresses. In the
Q40 case, all of device base address, byte access offset
and register shift is included in the platform specific
ISA access translation (in asm/mm_io.h).
As a consequence, such address translation gets applied
twice, and register addresses are mangled.
Use the device base address from the platform IO resource
for Q40 (the IO address translation will then add the correct
ISA window base address and byte access offset), with register
shift 1. Use MMIO base address and register shift 2 as before
for Falcon.
Encode PIO_OFFSET into IO port addresses for all registers
for Q40 except the data transfer register. Encode the MMIO
offset there (pata_falcon_data_xfer() directly uses raw IO
with no address translation).
Reported-by: William R Sowerbutts <will@sowerbutts.com> Closes: https://lore.kernel.org/r/CAMuHMdUU62jjunJh9cqSqHT87B0H0A4udOOPs=WN7WZKpcagVA@mail.gmail.com Link: https://lore.kernel.org/r/CAMuHMdUU62jjunJh9cqSqHT87B0H0A4udOOPs=WN7WZKpcagVA@mail.gmail.com Fixes: 44b1fbc0f5f3 ("m68k/q40: Replace q40ide driver with pata_falcon and falconide") Cc: stable@vger.kernel.org Cc: Finn Thain <fthain@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: William R Sowerbutts <will@sowerbutts.com> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A recent change in clang allows it to consider more expressions as
compile time constants, which causes it to point out an implicit
conversion in the scanf tests:
lib/test_scanf.c:661:2: warning: implicit conversion from 'int' to 'unsigned char' changes value from -168 to 88 [-Wconstant-conversion]
661 | test_number_prefix(unsigned char, "0xA7", "%2hhx%hhx", 0, 0xa7, 2, check_uchar);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/test_scanf.c:609:29: note: expanded from macro 'test_number_prefix'
609 | T result[2] = {~expect[0], ~expect[1]}; \
| ~ ^~~~~~~~~~
1 warning generated.
The result of the bitwise negation is the type of the operand after
going through the integer promotion rules, so this truncation is
expected but harmless, as the initial values in the result array get
overwritten by _test() anyways. Add an explicit cast to the expected
type in test_number_prefix() to silence the warning. There is no
functional change, as all the tests still pass with GCC 13.1.0 and clang
18.0.0.
When setup_system_zone, flex_bg is not initialized so it is always 1.
Use a new helper function, ext4_num_base_meta_blocks() which does not
depend on sbi->s_log_groups_per_flex being initialized.
[ Squashed two patches in the Link URL's below together into a single
commit, which is simpler to review/understand. Also fix checkpatch
warnings. --TYT ]
Following process will corrupt ext4 image:
Step 1:
jbd2_journal_commit_transaction
__jbd2_journal_insert_checkpoint(jh, commit_transaction)
// Put jh into trans1->t_checkpoint_list
journal->j_checkpoint_transactions = commit_transaction
// Put trans1 into journal->j_checkpoint_transactions
Step 3:
drop_cache
journal_shrink_one_cp_list
jbd2_journal_try_remove_checkpoint
if (!trylock_buffer(bh)) // lock bh, true
if (buffer_dirty(bh)) // buffer is not dirty
__jbd2_journal_remove_checkpoint(jh)
// remove jh from trans1->t_checkpoint_list
Step 4:
jbd2_log_do_checkpoint
trans1 = journal->j_checkpoint_transactions
// jh is not in trans1->t_checkpoint_list
jbd2_cleanup_journal_tail(journal) // trans1 is done
Step 5: Power cut, trans2 is not committed, jh is lost in next mounting.
Fix it by checking 'jh->b_transaction' before remove it from checkpoint.
Cc: stable@kernel.org Fixes: 46f881b5b175 ("jbd2: fix a race when checking checkpoint buffer busy") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230714025528.564988-3-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
journal_clean_one_cp_list() has been merged into
journal_shrink_one_cp_list(), but do chekpoint buffer cleanup from the
committing process is just a best effort, it should stop scan once it
meet a busy buffer, or else it will cause a lot of invalid buffer scan
and checks. We catch a performance regression when doing fs_mark tests
below.
After merging checkpoint buffer cleanup, the total loop count in
journal_shrink_one_cp_list() could be up to 6,261,600+ (50,000+ ~
100,000+ in general), most of them are invalid. This patch fix it
through passing 'shrink_type' into journal_shrink_one_cp_list() and add
a new 'SHRINK_BUSY_STOP' to indicate it should stop once meet a busy
buffer. After fix, the loop count descending back to 10,000+.
After this fix:
FSUse% Count Size Files/sec App Overhead
95 10000 1024 8558.4 49109
Cc: stable@kernel.org Fixes: b98dba273a0e ("jbd2: remove journal_clean_one_cp_list()") Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230714025528.564988-2-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before setting DDS and SDS values, we need to clear its value first
otherwise, we get incorrect results when we change/update the DMA bus
width several times due to the 'OR' expression.
SMP kernels fail to boot with commit 596ff4a09b89
("cpumask: re-introduce constant-sized cpumask optimizations").
|
| percpu: BUG: failure at mm/percpu.c:2981/pcpu_build_alloc_info()!
|
The write operation performed by the SCOND instruction in the atomic
inline asm code is not properly passed to the compiler. The compiler
cannot correctly optimize a nested loop that runs through the cpumask
in the pcpu_build_alloc_info() function.
Fix this by add a compiler barrier (memory clobber in inline asm).
Apparently atomic ops used to have memory clobber implicitly via
surrounding smp_mb(). However commit b64be6836993c431e
("ARC: atomics: implement relaxed variants") removed the smp_mb() for
the relaxed variants, but failed to add the explicit compiler barrier.
In all these cases, the last argument to dma_declare_coherent_memory() is
the buffer end address, but the expected value should be the size of the
reserved region.
Fixes: 39fb993038e1 ("media: arch: sh: ap325rxa: Use new renesas-ceu camera driver") Fixes: c2f9b05fd5c1 ("media: arch: sh: ecovec: Use new renesas-ceu camera driver") Fixes: f3590dc32974 ("media: arch: sh: kfr2r09: Use new renesas-ceu camera driver") Fixes: 186c446f4b84 ("media: arch: sh: migor: Use new renesas-ceu camera driver") Fixes: 1a3c230b4151 ("media: arch: sh: ms7724se: Use new renesas-ceu camera driver") Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20230724120742.2187-1-petrtesarik@huaweicloud.com Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
HNS3 NIC does not support GSO partial packets segmentation. Actually tunnel
packets for example NvGRE packets segment offload and checksum offload is
already supported. There is no need to keep gso partial feature bit. So
this patch removes it.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We hope that tc qdisc and dcb ets commands can not be used crosswise.
If we want to use any of the commands to configure tc,
We must use the other command to clear the existing configuration.
However, when we configure a single tc with tc qdisc,
we can still configure it with dcb ets.
Because we use mqprio_active as the tag of tc qdisc configuration,
but with dcb ets, we do not check mqprio_active.
This patch fix this issue by check mqprio_active before
executing the dcb ets command. and add dcb_ets_active to
replace HCLGE_FLAG_DCB_ENABLE and HCLGE_FLAG_MQPRIO_ENABLE
at the hclge layer,
Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
req1->tcam_data is defined as "u8 tcam_data[8]", and we convert it as
(u32 *) without considerring byte order conversion,
it may result in printing wrong data for tcam_data.
The opt_num field is controlled by user mode and is not currently
validated inside the kernel. An attacker can take advantage of this to
trigger an OOB read and potentially leak information.
BUG: KASAN: slab-out-of-bounds in nf_osf_match_one+0xbed/0xd10 net/netfilter/nfnetlink_osf.c:88
Read of size 2 at addr ffff88804bc64272 by task poc/6431
If priv->len is a multiple of 4, then dst[len / 4] can write past
the destination array which leads to stack corruption.
This construct is necessary to clean the remainder of the register
in case ->len is NOT a multiple of the register size, so make it
conditional just like nft_payload.c does.
The bug was added in 4.1 cycle and then copied/inherited when
tcp/sctp and ip option support was added.
Bug reported by Zero Day Initiative project (ZDI-CAN-21950,
ZDI-CAN-21951, ZDI-CAN-21961).
Fixes: 49499c3e6e18 ("netfilter: nf_tables: switch registers to 32 bit addressing") Fixes: 935b7f643018 ("netfilter: nft_exthdr: add TCP option matching") Fixes: 133dc203d77d ("netfilter: nft_exthdr: Support SCTP chunks") Fixes: dbb5281a1f84 ("netfilter: nf_tables: add support for matching IPv4 options") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
struct sja1105_cbs_entry {
- u64 port;
- u64 prio;
+ u64 port; /* Not used for SJA1110 */
+ u64 prio; /* Not used for SJA1110 */
u64 credit_hi;
u64 credit_lo;
u64 send_slope;
u64 idle_slope;
};
but did not actually implement tc-cbs offload fully for the new switch.
The offload is accepted, but it doesn't work.
The difference compared to earlier switch generations is that now, the
table of CBS shapers is sparse, because there are many more shapers, so
the mapping between a {port, prio} and a table index is static, rather
than requiring us to store the port and prio into the sja1105_cbs_entry.
So, the problem is that the code programs the CBS shaper parameters at a
dynamic table index which is incorrect.
All that needs to be done for SJA1110 CBS shapers to work is to bypass
the logic which allocates shapers in a dense manner, as for SJA1105, and
use the fixed mapping instead.
Fixes: 3e77e59bf8cf ("net: dsa: sja1105: add support for the SJA1110 switch family") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Error: Specified device failed to setup cbs hardware offload.
This comes from the fact that ndo_setup_tc(TC_SETUP_QDISC_CBS) presents
the same API for the qdisc create and replace cases, and the sja1105
driver fails to distinguish between the 2. Thus, it always thinks that
it must allocate the same shaper for a {port, queue} pair, when it may
instead have to replace an existing one.
Fixes: 4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
More careful measurement of the tc-cbs bandwidth shows that the stream
bandwidth (effectively idleslope) increases, there is a larger and
larger discrepancy between the rate limit obtained by the software
Qdisc, and the rate limit obtained by its offloaded counterpart.
The discrepancy becomes so large, that e.g. at an idleslope of 40000
(40Mbps), the offloaded cbs does not actually rate limit anything, and
traffic will pass at line rate through a 100 Mbps port.
The reason for the discrepancy is that the hardware documentation I've
been following is incorrect. UM11040.pdf (for SJA1105P/Q/R/S) states
about IDLE_SLOPE that it is "the rate (in unit of bytes/sec) at which
the credit counter is increased".
Cross-checking with UM10944.pdf (for SJA1105E/T) and UM11107.pdf
(for SJA1110), the wording is different: "This field specifies the
value, in bytes per second times link speed, by which the credit counter
is increased".
So there's an extra scaling for link speed that the driver is currently
not accounting for, and apparently (empirically), that link speed is
expressed in Kbps.
I've pondered whether to pollute the sja1105_mac_link_up()
implementation with CBS shaper reprogramming, but I don't think it is
worth it. IMO, the UAPI exposed by tc-cbs requires user space to
recalculate the sendslope anyway, since the formula for that depends on
port_transmit_rate (see man tc-cbs), which is not an invariant from tc's
perspective.
So we use the offload->sendslope and offload->idleslope to deduce the
original port_transmit_rate from the CBS formula, and use that value to
scale the offload->sendslope and offload->idleslope to values that the
hardware understands.
Some numerical data points:
40Mbps stream, max interfering frame size 1500, port speed 100M
---------------------------------------------------------------
Before (doesn't work) After (works)
credit_hi 77 77
credit_lo 1444 1444
send_slope 11860000 118
idle_slope 640000 6
Tested on SJA1105T, SJA1105S and SJA1110A, at 1Gbps and 100Mbps.
Fixes: 4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc") Reported-by: Yanan Yang <yanan.yang@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: 039f50629b7f ("ip_tunnel: Move stats update to iptunnel_xmit()") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igb devices can use as low as 64 descriptors.
This change will unify igb with other drivers.
Based on commit 7b1be1987c1e ("e1000e: lower ring minimum size to 64")
Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by: Olga Zaborska <olga.zaborska@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igbvf devices can use as low as 64 descriptors.
This change will unify igbvf with other drivers.
Based on commit 7b1be1987c1e ("e1000e: lower ring minimum size to 64")
Fixes: d4e0fe01a38a ("igbvf: add new driver to support 82576 virtual functions") Signed-off-by: Olga Zaborska <olga.zaborska@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igc devices can use as low as 64 descriptors.
This change will unify igc with other drivers.
Based on commit 7b1be1987c1e ("e1000e: lower ring minimum size to 64")
Fixes: 0507ef8a0372 ("igc: Add transmit and receive fastpath and interrupt handlers") Signed-off-by: Olga Zaborska <olga.zaborska@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The smq value used in the CN10K NIX AQ instruction enqueue mailbox
handler was truncated to 9-bit value from 10-bit value because of
typecasting the CN10K mbox request structure to the CN9K structure.
Though this hasn't caused any problems when programming the NIX SQ
context to the HW because the context structure is the same size.
However, this causes a problem when accessing the structure parameters.
This patch reads the right smq value for each platform.
Fixes: 30077d210c83 ("octeontx2-af: cn10k: Update NIX/NPA context structure") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the plug qdisc is used as a class of the qfq qdisc it could trigger a
UAF. This issue can be reproduced with following commands:
tc qdisc add dev lo root handle 1: qfq
tc class add dev lo parent 1: classid 1:1 qfq weight 1 maxpkt 512
tc qdisc add dev lo parent 1:1 handle 2: plug
tc filter add dev lo parent 1: basic classid 1:1
ping -c1 127.0.0.1
and boom:
[ 285.353793] BUG: KASAN: slab-use-after-free in qfq_dequeue+0xa7/0x7f0
[ 285.354910] Read of size 4 at addr ffff8880bad312a8 by task ping/144
[ 285.355903]
[ 285.356165] CPU: 1 PID: 144 Comm: ping Not tainted 6.5.0-rc3+ #4
[ 285.357112] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
[ 285.358376] Call Trace:
[ 285.358773] <IRQ>
[ 285.359109] dump_stack_lvl+0x44/0x60
[ 285.359708] print_address_description.constprop.0+0x2c/0x3c0
[ 285.360611] kasan_report+0x10c/0x120
[ 285.361195] ? qfq_dequeue+0xa7/0x7f0
[ 285.361780] qfq_dequeue+0xa7/0x7f0
[ 285.362342] __qdisc_run+0xf1/0x970
[ 285.362903] net_tx_action+0x28e/0x460
[ 285.363502] __do_softirq+0x11b/0x3de
[ 285.364097] do_softirq.part.0+0x72/0x90
[ 285.364721] </IRQ>
[ 285.365072] <TASK>
[ 285.365422] __local_bh_enable_ip+0x77/0x90
[ 285.366079] __dev_queue_xmit+0x95f/0x1550
[ 285.366732] ? __pfx_csum_and_copy_from_iter+0x10/0x10
[ 285.367526] ? __pfx___dev_queue_xmit+0x10/0x10
[ 285.368259] ? __build_skb_around+0x129/0x190
[ 285.368960] ? ip_generic_getfrag+0x12c/0x170
[ 285.369653] ? __pfx_ip_generic_getfrag+0x10/0x10
[ 285.370390] ? csum_partial+0x8/0x20
[ 285.370961] ? raw_getfrag+0xe5/0x140
[ 285.371559] ip_finish_output2+0x539/0xa40
[ 285.372222] ? __pfx_ip_finish_output2+0x10/0x10
[ 285.372954] ip_output+0x113/0x1e0
[ 285.373512] ? __pfx_ip_output+0x10/0x10
[ 285.374130] ? icmp_out_count+0x49/0x60
[ 285.374739] ? __pfx_ip_finish_output+0x10/0x10
[ 285.375457] ip_push_pending_frames+0xf3/0x100
[ 285.376173] raw_sendmsg+0xef5/0x12d0
[ 285.376760] ? do_syscall_64+0x40/0x90
[ 285.377359] ? __static_call_text_end+0x136578/0x136578
[ 285.378173] ? do_syscall_64+0x40/0x90
[ 285.378772] ? kasan_enable_current+0x11/0x20
[ 285.379469] ? __pfx_raw_sendmsg+0x10/0x10
[ 285.380137] ? __sock_create+0x13e/0x270
[ 285.380673] ? __sys_socket+0xf3/0x180
[ 285.381174] ? __x64_sys_socket+0x3d/0x50
[ 285.381725] ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 285.382425] ? __rcu_read_unlock+0x48/0x70
[ 285.382975] ? ip4_datagram_release_cb+0xd8/0x380
[ 285.383608] ? __pfx_ip4_datagram_release_cb+0x10/0x10
[ 285.384295] ? preempt_count_sub+0x14/0xc0
[ 285.384844] ? __list_del_entry_valid+0x76/0x140
[ 285.385467] ? _raw_spin_lock_bh+0x87/0xe0
[ 285.386014] ? __pfx__raw_spin_lock_bh+0x10/0x10
[ 285.386645] ? release_sock+0xa0/0xd0
[ 285.387148] ? preempt_count_sub+0x14/0xc0
[ 285.387712] ? freeze_secondary_cpus+0x348/0x3c0
[ 285.388341] ? aa_sk_perm+0x177/0x390
[ 285.388856] ? __pfx_aa_sk_perm+0x10/0x10
[ 285.389441] ? check_stack_object+0x22/0x70
[ 285.390032] ? inet_send_prepare+0x2f/0x120
[ 285.390603] ? __pfx_inet_sendmsg+0x10/0x10
[ 285.391172] sock_sendmsg+0xcc/0xe0
[ 285.391667] __sys_sendto+0x190/0x230
[ 285.392168] ? __pfx___sys_sendto+0x10/0x10
[ 285.392727] ? kvm_clock_get_cycles+0x14/0x30
[ 285.393328] ? set_normalized_timespec64+0x57/0x70
[ 285.393980] ? _raw_spin_unlock_irq+0x1b/0x40
[ 285.394578] ? __x64_sys_clock_gettime+0x11c/0x160
[ 285.395225] ? __pfx___x64_sys_clock_gettime+0x10/0x10
[ 285.395908] ? _copy_to_user+0x3e/0x60
[ 285.396432] ? exit_to_user_mode_prepare+0x1a/0x120
[ 285.397086] ? syscall_exit_to_user_mode+0x22/0x50
[ 285.397734] ? do_syscall_64+0x71/0x90
[ 285.398258] __x64_sys_sendto+0x74/0x90
[ 285.398786] do_syscall_64+0x64/0x90
[ 285.399273] ? exit_to_user_mode_prepare+0x1a/0x120
[ 285.399949] ? syscall_exit_to_user_mode+0x22/0x50
[ 285.400605] ? do_syscall_64+0x71/0x90
[ 285.401124] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 285.401807] RIP: 0033:0x495726
[ 285.402233] Code: ff ff ff f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 09
[ 285.404683] RSP: 002b:00007ffcc25fb618 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[ 285.405677] RAX: ffffffffffffffda RBX: 0000000000000040 RCX: 0000000000495726
[ 285.406628] RDX: 0000000000000040 RSI: 0000000002518750 RDI: 0000000000000000
[ 285.407565] RBP: 00000000005205ef R08: 00000000005f8838 R09: 000000000000001c
[ 285.408523] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000002517634
[ 285.409460] R13: 00007ffcc25fb6f0 R14: 0000000000000003 R15: 0000000000000000
[ 285.410403] </TASK>
[ 285.410704]
[ 285.410929] Allocated by task 144:
[ 285.411402] kasan_save_stack+0x1e/0x40
[ 285.411926] kasan_set_track+0x21/0x30
[ 285.412442] __kasan_slab_alloc+0x55/0x70
[ 285.412973] kmem_cache_alloc_node+0x187/0x3d0
[ 285.413567] __alloc_skb+0x1b4/0x230
[ 285.414060] __ip_append_data+0x17f7/0x1b60
[ 285.414633] ip_append_data+0x97/0xf0
[ 285.415144] raw_sendmsg+0x5a8/0x12d0
[ 285.415640] sock_sendmsg+0xcc/0xe0
[ 285.416117] __sys_sendto+0x190/0x230
[ 285.416626] __x64_sys_sendto+0x74/0x90
[ 285.417145] do_syscall_64+0x64/0x90
[ 285.417624] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 285.418306]
[ 285.418531] Freed by task 144:
[ 285.418960] kasan_save_stack+0x1e/0x40
[ 285.419469] kasan_set_track+0x21/0x30
[ 285.419988] kasan_save_free_info+0x27/0x40
[ 285.420556] ____kasan_slab_free+0x109/0x1a0
[ 285.421146] kmem_cache_free+0x1c2/0x450
[ 285.421680] __netif_receive_skb_core+0x2ce/0x1870
[ 285.422333] __netif_receive_skb_one_core+0x97/0x140
[ 285.423003] process_backlog+0x100/0x2f0
[ 285.423537] __napi_poll+0x5c/0x2d0
[ 285.424023] net_rx_action+0x2be/0x560
[ 285.424510] __do_softirq+0x11b/0x3de
[ 285.425034]
[ 285.425254] The buggy address belongs to the object at ffff8880bad31280
[ 285.425254] which belongs to the cache skbuff_head_cache of size 224
[ 285.426993] The buggy address is located 40 bytes inside of
[ 285.426993] freed 224-byte region [ffff8880bad31280, ffff8880bad31360)
[ 285.428572]
[ 285.428798] The buggy address belongs to the physical page:
[ 285.429540] page:00000000f4b77674 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xbad31
[ 285.430758] flags: 0x100000000000200(slab|node=0|zone=1)
[ 285.431447] page_type: 0xffffffff()
[ 285.431934] raw: 0100000000000200ffff88810094a8c0dead0000000001220000000000000000
[ 285.432757] raw: 000000000000000000000000800c000c00000001ffffffff0000000000000000
[ 285.433562] page dumped because: kasan: bad access detected
[ 285.434144]
[ 285.434320] Memory state around the buggy address:
[ 285.434828] ffff8880bad31180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 285.435580] ffff8880bad31200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 285.436264] >ffff8880bad31280: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 285.436777] ^
[ 285.437106] ffff8880bad31300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 285.437616] ffff8880bad31380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 285.438126] ==================================================================
[ 285.438662] Disabling lock debugging due to kernel taint
Fix this by:
1. Changing sch_plug's .peek handler to qdisc_peek_dequeued(), a
function compatible with non-work-conserving qdiscs
2. Checking the return value of qdisc_dequeue_peeked() in sch_qfq.
Fixes: 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost") Reported-by: valis <sec@valis.email> Signed-off-by: valis <sec@valis.email> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20230901162237.11525-1-jhs@mojatatu.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As with sk->sk_shutdown shown in the previous patch, sk->sk_err can be
read locklessly by unix_dgram_sendmsg().
Let's use READ_ONCE() for sk_err as well.
Note that the writer side is marked by commit cc04410af7de ("af_unix:
annotate lockless accesses to sk->sk_err").
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Previously, the defines for phy_device flags in the Micrel driver were
ambiguous in their representation. They were intended to be bit masks
but were mistakenly defined as bit positions. This led to the following
issues:
- MICREL_KSZ8_P1_ERRATA, designated for KSZ88xx switches, overlapped
with MICREL_PHY_FXEN and MICREL_PHY_50MHZ_CLK.
- Due to this overlap, the code path for MICREL_PHY_FXEN, tailored for
the KSZ8041 PHY, was not executed for KSZ88xx PHYs.
- Similarly, the code associated with MICREL_PHY_50MHZ_CLK wasn't
triggered for KSZ88xx.
To rectify this, all three flags have now been explicitly converted to
use the `BIT()` macro, ensuring they are defined as bit masks and
preventing potential overlaps in the future.
Fixes: 49011e0c1555 ("net: phy: micrel: ksz886x/ksz8081: add cabletest support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The existing code incorrectly casted a negative value (the result of a
subtraction) to an unsigned value without checking. For example, if
/proc/sys/net/ipv6/conf/*/temp_prefered_lft was set to 1, the preferred
lifetime would jump to 4 billion seconds. On my machine and network the
shortest lifetime that avoided underflow was 3 seconds.
Fixes: 76506a986dc3 ("IPv6: fix DESYNC_FACTOR") Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The veth_xmit function returns NETDEV_TX_OK even when packets are dropped.
This behavior leads to incorrect calculations of statistics counts, as
well as things like txq->trans_start updates.
Fixes: e314dbdc1c0d ("[NET]: Virtual ethernet device driver.") Signed-off-by: Liang Chen <liangchen.linux@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Disable virtualization features on 82580 just as on i210/i211.
This avoids that virt functions are acidentally called on 82850.
Fixes: 55cac248caa4 ("igb: Add full support for 82580 devices") Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Route hints when the nexthop is part of a multipath group causes packets
in the same receive batch to be sent to the same nexthop irrespective of
the multipath hash of the packet. So, do not extract route hint for
packets whose destination is part of a multipath group.
A new SKB flag IPSKB_MULTIPATH is introduced for this purpose, set the
flag when route is looked up in ip_mkroute_input() and use it in
ip_extract_route_hint() to check for the existence of the flag.
Fixes: 02b24941619f ("ipv4: use dst hint for ipv4 list receive") Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Drop intel_vgpu_reset_gtt() as it no longer has any callers. In addition
to eliminating dead code, this eliminates the last possible scenario where
__kvmgt_protect_table_find() can be reached without holding vgpu_lock.
Requiring vgpu_lock to be held when calling __kvmgt_protect_table_find()
will allow a protecting the gfn hash with vgpu_lock without too much fuss.
No functional change intended.
Fixes: ba25d977571e ("drm/i915/gvt: Do not destroy ppgtt_mm during vGPU D3->D0.") Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Tested-by: Yongwei Ma <yongwei.ma@intel.com> Reviewed-by: Zhi Wang <zhi.a.wang@intel.com> Link: https://lore.kernel.org/r/20230729013535.1070024-11-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix a use-after-free error that is possible if the xsk_diag interface
is used after the socket has been unbound from the device. This can
happen either due to the socket being closed or the device
disappearing. In the early days of AF_XDP, the way we tested that a
socket was not bound to a device was to simply check if the netdevice
pointer in the xsk socket structure was NULL. Later, a better system
was introduced by having an explicit state variable in the xsk socket
struct. For example, the state of a socket that is on the way to being
closed and has been unbound from the device is XSK_UNBOUND.
The commit in the Fixes tag below deleted the old way of signalling
that a socket is unbound, setting dev to NULL. This in the belief that
all code using the old way had been exterminated. That was
unfortunately not true as the xsk diagnostics code was still using the
old way and thus does not work as intended when a socket is going
down. Fix this by introducing a test against the state variable. If
the socket is in the state XSK_UNBOUND, simply abort the diagnostic's
netlink operation.
Fixes: 18b1ab7aa76b ("xsk: Fix race at socket teardown") Reported-by: syzbot+822d1359297e2694f873@syzkaller.appspotmail.com Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: syzbot+822d1359297e2694f873@syzkaller.appspotmail.com Tested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20230831100119.17408-1-magnus.karlsson@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
New skbs allocated via nf_send_reset() have skb->dev == NULL.
fib*_rules_early_flow_dissect helpers already have a 'struct net'
argument but its not passed down to the flow dissector core, which
will then WARN as it can't derive a net namespace to use:
read to 0xffff888150f31744 of 1 bytes by task 21839 on cpu 1:
fib_table_lookup+0x2bf/0xd50 net/ipv4/fib_trie.c:1585
fib_lookup include/net/ip_fib.h:383 [inline]
ip_route_output_key_hash_rcu+0x38c/0x12c0 net/ipv4/route.c:2751
ip_route_output_key_hash net/ipv4/route.c:2641 [inline]
__ip_route_output_key include/net/route.h:134 [inline]
ip_route_output_flow+0xa6/0x150 net/ipv4/route.c:2869
send4+0x1e7/0x500 drivers/net/wireguard/socket.c:61
wg_socket_send_skb_to_peer+0x94/0x130 drivers/net/wireguard/socket.c:175
wg_socket_send_buffer_to_peer+0xd6/0x100 drivers/net/wireguard/socket.c:200
wg_packet_send_handshake_initiation drivers/net/wireguard/send.c:40 [inline]
wg_packet_handshake_send_worker+0x10c/0x150 drivers/net/wireguard/send.c:51
process_one_work+0x434/0x860 kernel/workqueue.c:2600
worker_thread+0x5f2/0xa10 kernel/workqueue.c:2751
kthread+0x1d7/0x210 kernel/kthread.c:389
ret_from_fork+0x2e/0x40 arch/x86/kernel/process.c:145
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
value changed: 0x00 -> 0x01
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 21839 Comm: kworker/u4:18 Tainted: G W 6.5.0-syzkaller #0
Fixes: dccd9ecc3744 ("ipv4: Do not use dead fib_info entries.") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230830095520.1046984-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
read to 0xffff888149d77810 of 4 bytes by task 17828 on cpu 1:
sctp_writeable net/sctp/socket.c:9304 [inline]
sctp_poll+0x265/0x410 net/sctp/socket.c:8671
sock_poll+0x253/0x270 net/socket.c:1374
vfs_poll include/linux/poll.h:88 [inline]
do_pollfd fs/select.c:873 [inline]
do_poll fs/select.c:921 [inline]
do_sys_poll+0x636/0xc00 fs/select.c:1015
__do_sys_ppoll fs/select.c:1121 [inline]
__se_sys_ppoll+0x1af/0x1f0 fs/select.c:1101
__x64_sys_ppoll+0x67/0x80 fs/select.c:1101
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x00019e80 -> 0x0000cc80
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 17828 Comm: syz-executor.1 Not tainted 6.5.0-rc7-syzkaller-00185-g28f20a19294d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/20230830094519.950007-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When setting a high number of flows (limit being 65536),
fq_pie_timer() is currently using too much time as syzbot reported.
Add logic to yield the cpu every 2048 flows (less than 150 usec
on debug kernels).
It should also help by not blocking qdisc fast paths for too long.
Worst case (65536 flows) would need 31 jiffies for a complete scan.
Because LPC32xx PWM controllers have only a single output which is
registered as the only PWM device/channel per controller, it is known in
advance that pwm->hwpwm value is always 0. On basis of this fact
simplify the code by removing operations with pwm->hwpwm, there is no
controls which require channel number as input.
Even though I wasn't aware at the time when I forward ported that patch,
this fixes a null pointer dereference as lpc32xx->chip.pwms is NULL
before devm_pwmchip_add() is called.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 3d2813fb17e5 ("pwm: lpc32xx: Don't modify HW state in .probe() after the PWM chip was registered") Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When built with CONFIG_INTEL_MID_WATCHDOG=m, currently the driver
needs to be loaded manually, for the lack of module alias.
This causes unintended resets in cases where watchdog timer is
set-up by bootloader and the driver is not explicitly loaded.
Add MODULE_ALIAS() to load the driver automatically at boot and
avoid this issue.
While debugging a segfault on 'perf lock contention' without an
available perf.data file I noticed that it was basically calling:
perf_session__delete(ERR_PTR(-1))
Resulting in:
(gdb) run lock contention
Starting program: /root/bin/perf lock contention
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
failed to open perf.data: No such file or directory (try 'perf record' first)
Initializing perf session failed
Program received signal SIGSEGV, Segmentation fault.
0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
2858 if (!session->auxtrace)
(gdb) p session
$1 = (struct perf_session *) 0xffffffffffffffff
(gdb) bt
#0 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
#1 0x000000000057bb4d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:300
#2 0x000000000047c421 in __cmd_contention (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2161
#3 0x000000000047dc95 in cmd_lock (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2604
#4 0x0000000000501466 in run_builtin (p=0xe597a8 <commands+552>, argc=2, argv=0x7fffffffe200) at perf.c:322
#5 0x00000000005016d5 in handle_internal_command (argc=2, argv=0x7fffffffe200) at perf.c:375
#6 0x0000000000501824 in run_argv (argcp=0x7fffffffe02c, argv=0x7fffffffe020) at perf.c:419
#7 0x0000000000501b11 in main (argc=2, argv=0x7fffffffe200) at perf.c:535
(gdb)
So just set it to NULL after using PTR_ERR(session) to decode the error
as perf_session__delete(NULL) is supported.
The same problem was found in 'perf top' after an audit of all
perf_session__new() failure handling.
Fixes: 6ef81c55a2b6584c ("perf session: Return error code for perf_session__new() function on failure") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Cc: Mukesh Ojha <mojha@codeaurora.org> Cc: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Shawn Landden <shawn@git.icu> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: https://lore.kernel.org/lkml/ZN4Q2rxxsL08A8rd@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Drop the explicit check on the extended CPUID level in cpu_has_svm(), the
kernel's cached CPUID info will leave the entire SVM leaf unset if said
leaf is not supported by hardware. Prior to using cached information,
the check was needed to avoid false positives due to Intel's rather crazy
CPUID behavior of returning the values of the maximum supported leaf if
the specified leaf is unsupported.
In 616b14b47a86d880 ("perf build: Conditionally define NDEBUG") we
started using NDEBUG=1 when DEBUG=1 isn't present, so code that is
enclosed with assert() is not called.
In dd317df072071903 ("perf build: Make binutil libraries opt in") we
stopped linking against binutils-devel, for licensing reasons.
Recently people asked me why annotation of BPF programs wasn't working,
i.e. this:
case SYMBOL_ANNOTATE_ERRNO__NO_LIBOPCODES_FOR_BPF:
scnprintf(buf, buflen, "Please link with binutils's libopcode to enable BPF annotation");
This was on a fedora rpm, so its new enough that I had to try to test by
rebuilding using BUILD_NONDISTRO=1, only to get it segfaulting on me.
This combination made this libopcode function not to be called:
assert(bfd_check_format(bfdf, bfd_object));
Changing it to:
if (!bfd_check_format(bfdf, bfd_object))
abort();
Made it work, looking at this "check" function made me realize it
changes the 'bfdf' internal state, i.e. we better call it.
So stop using assert() on it, just call it and abort if it fails.
Probably it is better to propagate the error, etc, but it seems it is
unlikely to fail from the usage done so far and we really need to stop
using libopcodes, so do the quick fix above and move on.
With it we have BPF annotation back working when built with
BUILD_NONDISTRO=1:
⬢[acme@toolbox perf-tools-next]$ perf annotate --stdio2 bpf_prog_5280546344e3f45c_kfree_skb | head
No kallsyms or vmlinux with build-id 939bc71a1a51cdc434e60af93c7e734f7d5c0e7e was found
Samples: 12 of event 'cpu-clock:ppp', 4000 Hz, Event count (approx.): 3000000, [percent: local period]
bpf_prog_5280546344e3f45c_kfree_skb() bpf_prog_5280546344e3f45c_kfree_skb
Percent int kfree_skb(struct trace_event_raw_kfree_skb *args) {
nop
33.33 xchg %ax,%ax
push %rbp
mov %rsp,%rbp
sub $0x180,%rsp
push %rbx
push %r13
⬢[acme@toolbox perf-tools-next]$
Fixes: 6987561c9e86eace ("perf annotate: Enable annotation of BPF programs") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mohamed Mahmoud <mmahmoud@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Dave Tucker <datucker@redhat.com> Cc: Derek Barbosa <debarbos@redhat.com> Cc: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/lkml/ZMrMzoQBe0yqMek1@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver has been switched to use IRQF_NO_AUTOEN, but in the error
unwinding and remove paths calls to enable_irq() were left in place, which
will lead to an incorrect enable counter value.
Remove option having i2c client contain raw gpio number instead of proper
IRQ number. There are no users of this facility in mainline and it will
allow cleaning up the driver code with regard to wakeup handling, etc.
So, let's drop output GPIO direction check and only check GPIO value to set
the initial power state.
Fixes: 706dc68102bc ("backlight: gpio: Explicitly set the direction of the GPIO") Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230721093342.1532531-1-victor.liu@nxp.com Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Allocate driver data as first resource in the probe function. This way it
can be used during allocation of the other resources (instead of assigning
these to local variables first and update driver data only when it's
allocated). Also as driver data is allocated using a devm function this
should happen first to have the order of freeing resources in the error
path and the remove function in reverse.
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.