binfmt_flat loader uses the gap between text and data to store data
segment pointers for the libraries. Even in the absence of shared
libraries it stores at least one pointer to the executable's own data
segment. Text and data can go back to back in the flat binary image and
without offsetting data segment last few instructions in the text
segment may get corrupted by the data segment pointer.
Fix it by reverting commit a2357223c50a ("binfmt_flat: don't offset the
data start").
Cc: stable@vger.kernel.org Fixes: a2357223c50a ("binfmt_flat: don't offset the data start") Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Evidently, when I did this previously, we didn't have more than
10 policies and didn't run into the reallocation path, because
it's missing a memset() for the unused policies. Fix that.
Fixes: d07dcf9aadd6 ("netlink: add infrastructure to expose policies to userspace") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The legacy ethtool userspace tool shows an error when no features could
be changed. It's useful to have a netlink reply to be able to show this
error when __netdev_update_features wasn't called, for example:
1. ethtool -k eth0
large-receive-offload: off
2. ethtool -K eth0 rx-fcs on
3. ethtool -K eth0 lro on
Could not change any device features
rx-lro: off [requested on]
4. ethtool -K eth0 lro on
# The output should be the same, but without this patch the kernel
# doesn't send the reply, and ethtool is unable to detect the error.
This commit makes ethtool-netlink always return a reply when requested,
and it still avoids unnecessary calls to __netdev_update_features if the
wanted features haven't changed.
Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ethtool-netlink ignores dev->hw_features and may confuse the drivers by
asking them to enable features not in the hw_features bitmask. For
example:
1. ethtool -k eth0
tls-hw-tx-offload: off [fixed]
2. ethtool -K eth0 tls-hw-tx-offload on
tls-hw-tx-offload: on
3. ethtool -k eth0
tls-hw-tx-offload: on [fixed]
Fitler out dev->hw_features from req_wanted to fix it and to resemble
the legacy ethtool behavior.
Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It completely discards the old wanted bits, so they are forgotten with
the next ethtool command. Sample steps to reproduce:
1. ethtool -k eth0
tx-tcp-segmentation: on # TSO is on from the beginning
2. ethtool -K eth0 tx off
tx-tcp-segmentation: off [not requested]
3. ethtool -k eth0
tx-tcp-segmentation: off [requested on]
4. ethtool -K eth0 rx off # Some change unrelated to TSO
5. ethtool -k eth0
tx-tcp-segmentation: off # "Wanted on" is forgotten
This commit fixes it by changing the formula to:
(req_wanted & req_mask) | (old_wanted & ~req_mask),
where old_active was replaced by old_wanted to account for the wanted
bits.
The shortcut condition for the case where nothing was changed now
compares wanted bitmasks, instead of wanted to active.
Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Most statistics in ena driver are incremented, meaning that a stat's
value is a sum of all increases done to it since driver/queue
initialization.
This patch makes all statistics this way, effectively making missed_tx
statistic incremental.
Also added a comment regarding rx_drops and tx_drops to make it
clearer how these counters are calculated.
Fixes: 11095fdb712b ("net: ena: add statistics for missed tx packets") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__tipc_nl_compat_dumpit() has two callers, and it expects them to
pass a valid nlmsghdr via arg->data. This header is artificial and
crafted just for __tipc_nl_compat_dumpit().
tipc_nl_compat_publ_dump() does so by putting a genlmsghdr as well
as some nested attribute, TIPC_NLA_SOCK. But the other caller
tipc_nl_compat_dumpit() does not, this leaves arg->data uninitialized
on this call path.
Fix this by just adding a similar nlmsghdr without any payload in
tipc_nl_compat_dumpit().
This bug exists since day 1, but the recent commit 6ea67769ff33
("net: tipc: prepare attrs in __tipc_nl_compat_dumpit()") makes it
easier to appear.
Reported-and-tested-by: syzbot+0e7181deafa7e0b79923@syzkaller.appspotmail.com Fixes: d0796d1ef63d ("tipc: convert legacy nl bearer dump to nl compat") Cc: Jon Maloy <jmaloy@redhat.com> Cc: Ying Xue <ying.xue@windriver.com> Cc: Richard Alpe <richard.alpe@ericsson.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__smc_diag_dump() is potentially copying uninitialized kernel stack memory
into socket buffers, since the compiler may leave a 4-byte hole near the
beginning of `struct smcd_diag_dmbinfo`. Fix it by initializing `dinfo`
with memset().
Fixes: 4b1b7d3b30a6 ("net/smc: add SMC-D diag support") Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The number of output and input streams was never being reduced, eg when
processing received INIT or INIT_ACK chunks.
The effect is that DATA chunks can be sent with invalid stream ids
and then discarded by the remote system.
Fixes: 2075e50caf5ea ("sctp: convert to genradix") Signed-off-by: David Laight <david.laight@aculab.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tcf_ct_handle_fragments() shouldn't free the skb when ip_defrag() call
fails. Otherwise, we will cause a double-free bug.
In such cases, just return the error to the caller.
Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct") Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Passing large uint32 sockaddr_qrtr.port numbers for port allocation
triggers a warning within idr_alloc() since the port number is cast
to int, and thus interpreted as a negative number. This leads to
the rejection of such valid port numbers in qrtr_port_assign() as
idr_alloc() fails.
To avoid the problem, switch to idr_alloc_u32() instead.
Fixes: bdabad3e363d ("net: Add Qualcomm IPC router") Reported-by: syzbot+f31428628ef672716ea8@syzkaller.appspotmail.com Signed-off-by: Necip Fazil Yildiran <necip@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the nexthop code will use an empty NHA_GROUP attribute, but it
requires at least 1 entry in order to function properly. Otherwise we
end up derefencing null or random pointers all over the place due to not
having any nh_grp_entry members allocated, nexthop code relies on having at
least the first member present. Empty NHA_GROUP doesn't make any sense so
just disallow it.
Also add a WARN_ON for any future users of nexthop_create_group().
CC: David Ahern <dsahern@gmail.com> Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Reported-by: syzbot+a61aa19b0c14c8770bd9@syzkaller.appspotmail.com Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We may access the two bytes after vlan_hdr in vlan_set_encap_proto(). So
we should pull VLAN_HLEN + sizeof(unsigned short) in skb_vlan_untag() or
we may access the wrong data.
Fixes: 0d5501c1c828 ("net: Always untag vlan-tagged traffic on input.") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When receiving an IPv4 packet inside an IPv6 GRE packet, and the
IP6_TNL_F_RCV_DSCP_COPY flag is set on the tunnel, the IPv4 header would
get corrupted. This is due to the common ip6_tnl_rcv() function assuming
that the inner header is always IPv6. This patch checks the tunnel
protocol for IPv4 inner packets, but still defaults to IPv6.
Fixes: 308edfdf1563 ("gre6: Cleanup GREv6 receive path, call common GRE functions") Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This breaks display wake up in stable kernels (5.7.x and 5.8.x).
Note that there is no upstream equivalent to this
revert. This patch was targeted for stable by Sasha's stable
patch process. Presumably there are some other changes necessary
for this patch to work properly on stable kernels.
When an MMU notifier call results in unmapping a range that spans multiple
PGDs, we end up calling into cond_resched_lock() when crossing a PGD boundary,
since this avoids running into RCU stalls during VM teardown. Unfortunately,
if the VM is destroyed as a result of OOM, then blocking is not permitted
and the call to the scheduler triggers the following BUG():
The 'flags' field of 'struct mmu_notifier_range' is used to indicate
whether invalidate_range_{start,end}() are permitted to block. In the
case of kvm_mmu_notifier_invalidate_range_start(), this field is not
forwarded on to the architecture-specific implementation of
kvm_unmap_hva_range() and therefore the backend cannot sensibly decide
whether or not to block.
Add an extra 'flags' parameter to kvm_unmap_hva_range() so that
architectures are aware as to whether or not they are permitted to block.
Cc: <stable@vger.kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20200811102725.7121-2-will@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Treat a NULL cmdline the same as empty. Although this is unlikely to
happen in practice, the x86 kernel entry does check for NULL cmdline and
handles it, so do it here as well.
When remapping the kernel rodata section RO in the EFI pagetables, the
protection flags that were used for the text section are being reused,
but the rodata section should not be marked executable.
IA32_MCG_STATUS.RIPV indicates whether the return RIP value pushed onto
the stack as part of machine check delivery is valid or not.
Various drivers copied a code fragment that uses the RIPV bit to
determine the severity of the error as either HW_EVENT_ERR_UNCORRECTED
or HW_EVENT_ERR_FATAL, but this check is reversed (marking errors where
RIPV is set as "FATAL").
Reverse the tests so that the error is marked fatal when RIPV is not set.
As per PAPR we have to look for both EPOW sensor value and event
modifier to identify the type of event and take appropriate action.
In LoPAPR v1.1 section 10.2.2 includes table 136 "EPOW Action Codes":
SYSTEM_SHUTDOWN 3
The system must be shut down. An EPOW-aware OS logs the EPOW error
log information, then schedules the system to be shut down to begin
after an OS defined delay internal (default is 10 minutes.)
Then in section 10.3.2.2.8 there is table 146 "Platform Event Log
Format, Version 6, EPOW Section", which includes the "EPOW Event
Modifier":
For EPOW sensor value = 3
0x01 = Normal system shutdown with no additional delay
0x02 = Loss of utility power, system is running on UPS/Battery
0x03 = Loss of system critical functions, system should be shutdown
0x04 = Ambient temperature too high
All other values = reserved
We have a user space tool (rtas_errd) on LPAR to monitor for
EPOW_SHUTDOWN_ON_UPS. Once it gets an event it initiates shutdown
after predefined time. It also starts monitoring for any new EPOW
events. If it receives "Power restored" event before predefined time
it will cancel the shutdown. Otherwise after predefined time it will
shutdown the system.
Commit 79872e35469b ("powerpc/pseries: All events of
EPOW_SYSTEM_SHUTDOWN must initiate shutdown") changed our handling of
the "on UPS/Battery" case, to immediately shutdown the system. This
breaks existing setups that rely on the userspace tool to delay
shutdown and let the system run on the UPS.
Fixes: 79872e35469b ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown") Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
[mpe: Massage change log and add PAPR references] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200820061844.306460-1-hegdevasant@linux.vnet.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When adding a new fd to an epoll, and that this new fd is an
epoll fd itself, we recursively scan the fds attached to it
to detect cycles, and add non-epool files to a "check list"
that gets subsequently parsed.
However, this check list isn't completely safe when deletions
can happen concurrently. To sidestep the issue, make sure that
a struct file placed on the check list sees its f_count increased,
ensuring that a concurrent deletion won't result in the file
disapearing from under our feet.
Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
b53_common.c:1583:13: warning: The left expression of the compound
assignment is an uninitialized value. The computed value will
also be garbage
ent.port &= ~BIT(port);
~~~~~~~~ ^
ent is set by a successful call to b53_arl_read(). Unsuccessful
calls are caught by an switch statement handling specific returns.
b32_arl_read() calls b53_arl_op_wait() which fails with the
unhandled -ETIMEDOUT.
So add -ETIMEDOUT to the switch statement. Because
b53_arl_op_wait() already prints out a message, do not add another
one.
Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
netvsc_vf_xmit() / dev_queue_xmit() will call VF NIC’s ndo_select_queue
or netdev_pick_tx() again. They will use skb_get_rx_queue() to get the
queue number, so the “skb->queue_mapping - 1” will be used. This may
cause the last queue of VF not been used.
Use skb_record_rx_queue() here, so that the skb_get_rx_queue() called
later will get the correct queue number, and VF will be able to use
all queues.
Fixes: b3bf5666a510 ("hv_netvsc: defer queue selection to VF") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Calling generic selftests "make install" fails as rsync expects all
files from TEST_GEN_PROGS to be present. The binary is not generated
anymore (commit 3b09d27cc93d) so we can safely remove it from there
and also from gitignore.
Replace alloc_etherdev_mq with devm_alloc_etherdev_mqs. In this way,
when probe fails, netdev can be freed automatically.
Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
This macro prints the call stack if the expression inside of it is
true [1], but the expression inside of it is the wanted situation.
The expression checks whether the ring has an XDP queue and its index
corresponds to a XDP one.
This patch changes the expression to
!ENA_IS_XDP_INDEX(adapter, i) && adapter->ena_napi[i].xdp_ring
which indicates an unwanted situation.
Also, change the structure of the function. The napi handler is
unregistered for all rings, and so there's no need to check whether the
index is an XDP index or not. By removing this check the code becomes
much more readable.
Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The reset work is scheduled by the timer routine whenever it
detects that a device reset is required (e.g. when a keep_alive signal
is missing).
When releasing device resources in ena_destroy_device() the driver
cancels the scheduling of the timer routine without destroying the reset
work explicitly.
This creates the following bug:
The driver is suspended and the ena_suspend() function is called
-> This function calls ena_destroy_device() to free the net device
resources
-> The driver waits for the timer routine to finish
its execution and then cancels it, thus preventing from it
to be called again.
If, in its final execution, the timer routine schedules a reset,
the reset routine might be called afterwards,and a redundant call to
ena_restore_device() would be made.
By changing the reset routine we allow it to read the device's state
accurately.
This is achieved by checking whether ENA_FLAG_TRIGGER_RESET flag is set
before resetting the device and making both the destruction function and
the flag check are under rtnl lock.
The ENA_FLAG_TRIGGER_RESET is cleared at the end of the destruction
routine. Also surround the flag check with 'likely' because
we expect that the reset routine would be called only when
ENA_FLAG_TRIGGER_RESET flag is set.
The destruction of the timer and reset services in __ena_shutoff() have to
stay, even though the timer routine is destroyed in ena_destroy_device().
This is to avoid a case in which the reset routine is scheduled after
free_netdev() in __ena_shutoff(), which would create an access to freed
memory in adapter->flags.
Fixes: 8c5c7abdeb2d ("net: ena: add power management ops to the ENA driver") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the ARP monitor is used for link detection, ARP replies are
validated for all slaves (arp_validate=3) and fail_over_mac is set to
active, two slaves of an active-backup bond may get stuck in a state
where both of them are active and pass packets that they receive to
the bond. This state makes IPv6 duplicate address detection fail. The
state is reached thus:
1. The current active slave goes down because the ARP target
is not reachable.
2. The current ARP slave is chosen and made active.
3. A new slave is enslaved. This new slave becomes the current active
slave and can reach the ARP target.
As a result, the current ARP slave stays active after the enslave
action has finished and the log is littered with "PROBE BAD" messages:
> bond0: PROBE: c_arp ens10 && cas ens11 BAD
The workaround is to remove the slave with "going back" status from
the bond and re-enslave it. This issue was encountered when DPDK PMD
interfaces were being enslaved to an active-backup bond.
I would be possible to fix the issue in bond_enslave() or
bond_change_active_slave() but the ARP monitor was fixed instead to
keep most of the actions changing the current ARP slave in the ARP
monitor code. The current ARP slave is set as inactive and backup
during the commit phase. A new state, BOND_LINK_FAIL, has been
introduced for slaves in the context of the ARP monitor. This allows
administrators to see how slaves are rotated for sending ARP requests
and attempts are made to find a new active slave.
Fixes: b2220cad583c9 ("bonding: refactor ARP active-backup monitor") Signed-off-by: Jiri Wiesner <jwiesner@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
For a power9 KVM guest with XIVE enabled, running a test loop
where we hotplug 384 vcpus and then unplug them, the following traces
can be seen (generally within a few loops) either from the unplugged
vcpu:
cpu 65 (hwid 65) Ready to die...
Querying DEAD? cpu 66 (66) shows 2
list_del corruption. next->prev should be c00a000002470208, but was c00a000002470048
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:56!
Oops: Exception in kernel mode, sig: 5 [#1]
LE SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: fuse nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 ...
CPU: 66 PID: 0 Comm: swapper/66 Kdump: loaded Not tainted 4.18.0-221.el8.ppc64le #1
NIP: c0000000007ab50c LR: c0000000007ab508 CTR: 00000000000003ac
REGS: c0000009e5a17840 TRAP: 0700 Not tainted (4.18.0-221.el8.ppc64le)
MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28000842 XER: 20040000
...
NIP __list_del_entry_valid+0xac/0x100
LR __list_del_entry_valid+0xa8/0x100
Call Trace:
__list_del_entry_valid+0xa8/0x100 (unreliable)
free_pcppages_bulk+0x1f8/0x940
free_unref_page+0xd0/0x100
xive_spapr_cleanup_queue+0x148/0x1b0
xive_teardown_cpu+0x1bc/0x240
pseries_mach_cpu_die+0x78/0x2f0
cpu_die+0x48/0x70
arch_cpu_idle_dead+0x20/0x40
do_idle+0x2f4/0x4c0
cpu_startup_entry+0x38/0x40
start_secondary+0x7bc/0x8f0
start_secondary_prolog+0x10/0x14
or on the worker thread handling the unplug:
pseries-hotplug-cpu: Attempting to remove CPU <NULL>, drc index: 1000013a
Querying DEAD? cpu 314 (314) shows 2
BUG: Bad page state in process kworker/u768:3 pfn:95de1
cpu 314 (hwid 314) Ready to die...
page:c00a000002577840 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0
flags: 0x5ffffc00000000()
raw: 005ffffc000000005deadbeef00001005deadbeef00002000000000000000000
raw: 0000000000000000000000000000000000000000ffffff7f0000000000000000
page dumped because: nonzero mapcount
Modules linked in: kvm xt_CHECKSUM ipt_MASQUERADE xt_conntrack ...
CPU: 0 PID: 548 Comm: kworker/u768:3 Kdump: loaded Not tainted 4.18.0-224.el8.bz1856588.ppc64le #1
Workqueue: pseries hotplug workque pseries_hp_work_fn
Call Trace:
dump_stack+0xb0/0xf4 (unreliable)
bad_page+0x12c/0x1b0
free_pcppages_bulk+0x5bc/0x940
page_alloc_cpu_dead+0x118/0x120
cpuhp_invoke_callback.constprop.5+0xb8/0x760
_cpu_down+0x188/0x340
cpu_down+0x5c/0xa0
cpu_subsys_offline+0x24/0x40
device_offline+0xf0/0x130
dlpar_offline_cpu+0x1c4/0x2a0
dlpar_cpu_remove+0xb8/0x190
dlpar_cpu_remove_by_index+0x12c/0x150
dlpar_cpu+0x94/0x800
pseries_hp_work_fn+0x128/0x1e0
process_one_work+0x304/0x5d0
worker_thread+0xcc/0x7a0
kthread+0x1ac/0x1c0
ret_from_kernel_thread+0x5c/0x80
The latter trace is due to the following sequence:
where drain_pages() in this case is called under the assumption that
the unplugged cpu is no longer executing. To ensure that is the case,
and early call is made to __cpu_die()->pseries_cpu_die(), which runs a
loop that waits for the cpu to reach a halted state by polling its
status via query-cpu-stopped-state RTAS calls. It only polls for 25
iterations before giving up, however, and in the trace above this
results in the following being printed only .1 seconds after the
hotplug worker thread begins processing the unplug request:
pseries-hotplug-cpu: Attempting to remove CPU <NULL>, drc index: 1000013a
Querying DEAD? cpu 314 (314) shows 2
At that point the worker thread assumes the unplugged CPU is in some
unknown/dead state and procedes with the cleanup, causing the race
with the XIVE cleanup code executed by the unplugged CPU.
Fix this by waiting indefinitely, but also making an effort to avoid
spurious lockup messages by allowing for rescheduling after polling
the CPU status and printing a warning if we wait for longer than 120s.
Fixes: eac1e731b59ee ("powerpc/xive: guest exploitation of the XIVE interrupt controller") Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Tested-by: Greg Kurz <groug@kaod.org> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Reviewed-by: Greg Kurz <groug@kaod.org>
[mpe: Trim oopses in change log slightly for readability] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200811161544.10513-1-mdroth@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
After further analysis, the bug is triggered by
Commit eaaacd23910f ("bpf: Add task and task/file iterator targets")
which introduced task_file bpf iterator, which traverses all open file
descriptors for all tasks in the current namespace.
The latest `bpftool prog` calls a task_file bpf program to traverse
all files in the system in order to associate processes with progs/maps, etc.
When traversing files for a given task, rcu read_lock is taken to
access all files in a file_struct. But it used get_file() to grab
a file, which is not right. It is possible file->f_count is 0 and
get_file() will unconditionally increase it.
Later put_file() may cause all kind of issues with the above
as one of sympotoms.
The failure can be reproduced with the following steps in a few seconds:
$ cat t.c
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#define N 10000
int fd[N];
int main() {
int i;
for (i = 0; i < N; i++) {
fd[i] = open("./note.txt", 'r');
if (fd[i] < 0) {
fprintf(stderr, "failed\n");
return -1;
}
}
for (i = 0; i < N; i++)
close(fd[i]);
return 0;
}
$ gcc -O2 t.c
$ cat run.sh
#/bin/bash
for i in {1..100}
do
while true; do ./a.out; done &
done
$ ./run.sh
$ while true; do bpftool prog >& /dev/null; done
This patch used get_file_rcu() which only grabs a file if the
file->f_count is not zero. This is to ensure the file pointer
is always valid. The above reproducer did not fail for more
than 30 minutes.
Fixes: eaaacd23910f ("bpf: Add task and task/file iterator targets") Suggested-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/bpf/20200817174214.252601-1-yhs@fb.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit ("03fd42d458fb powerpc/fixmap: Fix FIX_EARLY_DEBUG_BASE when
page size is 256k") reworked the setup of the early debug area and
mistakenly replaced 128 * 1024 by SZ_128.
Change to SZ_128K to restore the original 128 kbytes size of the area.
If an error occurs during the construction of an afs superblock, it's
possible that an error occurs after a superblock is created, but before
we've created the root dentry. If the superblock has a dynamic root
(ie. what's normally mounted on /afs), the afs_kill_super() will call
afs_dynroot_depopulate() to unpin any created dentries - but this will
oops if the root hasn't been created yet.
Fix this by skipping that bit of code if there is no root dentry.
qconf is supposed to work with Qt4 and Qt5, but since commit c4f7398bee9c ("kconfig: qconf: make debug links work again"),
building with Qt4 fails as follows:
HOSTCXX scripts/kconfig/qconf.o
scripts/kconfig/qconf.cc: In member function ‘void ConfigInfoView::clicked(const QUrl&)’:
scripts/kconfig/qconf.cc:1241:3: error: ‘qInfo’ was not declared in this scope; did you mean ‘setInfo’?
1241 | qInfo() << "Clicked link is empty";
| ^~~~~
| setInfo
scripts/kconfig/qconf.cc:1254:3: error: ‘qInfo’ was not declared in this scope; did you mean ‘setInfo’?
1254 | qInfo() << "Clicked symbol is invalid:" << data;
| ^~~~~
| setInfo
make[1]: *** [scripts/Makefile.host:129: scripts/kconfig/qconf.o] Error 1
make: *** [Makefile:606: xconfig] Error 2
qInfo() does not exist in Qt4. In my understanding, these call-sites
should be unreachable. Perhaps, qWarning(), assertion, or something
is better, but qInfo() is not the right one to use here, I think.
Fixes: c4f7398bee9c ("kconfig: qconf: make debug links work again") Reported-by: Ronald Warsow <rwarsow@gmx.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch caused some issues on SEND operation, and it should be reverted
to make the drivers work correctly. There will be a better solution that
has been tested carefully to solve the original problem.
Driver shall add only the kernel qps to the flush list for clean up.
During async error events from the HW, driver is adding qps to this list
without checking if the qp is kernel qp or not.
Add a check to avoid user qp addition to the flush list.
Fixes: 942c9b6ca8de ("RDMA/bnxt_re: Avoid Hard lockup during error CQE processing") Fixes: c50866e2853a ("bnxt_re: fix the regression due to changes in alloc_pbl") Link: https://lore.kernel.org/r/1596689148-4023-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
../arch/x86/pci/xen.c: In function ‘pci_xen_init’:
../arch/x86/pci/xen.c:410:2: error: implicit declaration of function ‘acpi_noirq_set’; did you mean ‘acpi_irq_get’? [-Werror=implicit-function-declaration]
acpi_noirq_set();
Fixes: 88e9ca161c13 ("xen/pci: Use acpi_noirq_set() helper to avoid #ifdef") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: xen-devel@lists.xenproject.org Cc: linux-pci@vger.kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
efifb_probe() will issue an error message in case the kernel is booted
as Xen dom0 from UEFI as EFI_MEMMAP won't be set in this case. Avoid
that message by calling efi_mem_desc_lookup() only if EFI_MEMMAP is set.
If you right-click in the ConfigList window, you will see the following
messages in the console:
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:888
QObject::connect: (sender name: 'config')
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:897
QObject::connect: (sender name: 'config')
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:906
QObject::connect: (sender name: 'config')
Right, there is no such slot in QAction. I think this is a typo of
setChecked.
Due to this bug, when you toggled the menu "Option->Show Name/Range/Data"
the state of the context menu was not previously updated. Fix this.
Fixes: d5d973c3f8a9 ("Port xconfig to Qt5 - Put back some of the old implementation(part 2)") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If you right-click the first row in the option tree, the pop-up menu
shows up, but if you right-click the second row or below, the event
is ignored due to the following check:
if (e->y() <= header()->geometry().bottom()) {
Perhaps, the intention was to show the pop-menu only when the tree
header was right-clicked, but this handler is not called in that case.
Since the origin of e->y() starts from the bottom of the header,
this check is odd.
Going forward, you can right-click anywhere in the tree to get the
pop-up menu.
The interrupt might be shared, in which case it is not an error for the
interrupt handler to be called when the interrupt status is zero, so don't
print the message unless there was enabled interrupt status.
Link: https://lore.kernel.org/r/20200811133936.19171-1-adrian.hunter@intel.com Fixes: 9333d7757348 ("scsi: ufs: Fix irq return code") Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some controller like Exynos determines if FATAL ERROR (0x7) in OCS field in
UTRD occurs for values other than GOOD (0x0) in STATUS field in response
upiu as well as errors that a host controller can't cover. This patch is
to prevent from reporting command results in those cases.
Link: https://lore.kernel.org/r/20200528011658.71590-6-alim.akhtar@samsung.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
With the correct behavior, setting the bit to '0' indicates clear and '1'
indicates no change. If host controller handles this the other way around,
UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR can be used.
Link: https://lore.kernel.org/r/20200528011658.71590-2-alim.akhtar@samsung.com Reviewed-by: Can Guo <cang@codeaurora.org> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Seungwon Jeon <essuuj@gmail.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently invalid CPU addresses are not being sanity checked resulting in
SATA setup failure on a SynQuacer SC2A11 development machine. The original
check was removed by and earlier commit, so add a sanity check back in
to avoid this regression.
Fixes: 7a8b64d17e35 ("of/address: use range parser for of_dma_get_range") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200817113208.523805-1-colin.king@canonical.com Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If PAE paging would be in use following an execution of MOV to CR0 or
MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of
CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then
the PDPTEs are loaded from the address in CR3.
Fixes: b9baba8614890 ("KVM, pkeys: expose CPUID/CR4 to guest") Cc: Huaitong Han <huaitong.han@intel.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Peter Shier <pshier@google.com> Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20200817181655.3716509-1-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If PAE paging would be in use following an execution of MOV to CR0 or
MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of
CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then
the PDPTEs are loaded from the address in CR3.
Fixes: 0be0226f07d14 ("KVM: MMU: fix SMAP virtualization") Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Peter Shier <pshier@google.com> Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20200817181655.3716509-2-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
IA-64 is special and treats pgd_offset_k() differently to pgd_offset(),
using different formulae to calculate the indices into the kernel and user
PGDs. The index into the user PGDs takes into account the region number,
but the index into the kernel (init_mm) PGD always assumes a predefined
kernel region number. Commit 974b9b2c68f3 ("mm: consolidate pte_index() and
pte_offset_*() definitions") made IA-64 use a generic pgd_offset_k() which
incorrectly used pgd_index() for kernel page tables. As a result, the
index into the kernel PGD was going out of bounds and the kernel hung
during early boot.
Allow overrides of pgd_offset_k() and override it on IA-64 with the old
implementation that will correctly index the kernel PGD.
Fixes: 974b9b2c68f3 ("mm: consolidate pte_index() and pte_offset_*() definitions") Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com> Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The vfio_iommu_replay() function does not currently unwind on error,
yet it does pin pages, perform IOMMU mapping, and modify the vfio_dma
structure to indicate IOMMU mapping. The IOMMU mappings are torn down
when the domain is destroyed, but the other actions go on to cause
trouble later. For example, the iommu->domain_list can be empty if we
only have a non-IOMMU backed mdev attached. We don't currently check
if the list is empty before getting the first entry in the list, which
leads to a bogus domain pointer. If a vfio_dma entry is erroneously
marked as iommu_mapped, we'll attempt to use that bogus pointer to
retrieve the existing physical page addresses.
This is the scenario that uncovered this issue, attempting to hot-add
a vfio-pci device to a container with an existing mdev device and DMA
mappings, one of which could not be pinned, causing a failure adding
the new group to the existing container and setting the conditions
for a subsequent attempt to explode.
To resolve this, we can first check if the domain_list is empty so
that we can reject replay of a bogus domain, should we ever encounter
this inconsistent state again in the future. The real fix though is
to add the necessary unwind support, which means cleaning up the
current pinning if an IOMMU mapping fails, then walking back through
the r-b tree of DMA entries, reading from the IOMMU which ranges are
mapped, and unmapping and unpinning those ranges. To be able to do
this, we also defer marking the DMA entry as IOMMU mapped until all
entries are processed, in order to allow the unwind to know the
disposition of each entry.
Fixes: a54eb55045ae ("vfio iommu type1: Add support for mediated devices") Reported-by: Zhiyi Guo <zhguo@redhat.com> Tested-by: Zhiyi Guo <zhguo@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
A down_read on memory_lock is held when performing read/write accesses
to MMIO BAR space, including across the copy_to/from_user() callouts
which may fault. If the user buffer for these copies resides in an
mmap of device MMIO space, the mmap fault handler will acquire a
recursive read-lock on memory_lock. Avoid this by reducing the lock
granularity. Sequential accesses requiring multiple ioread/iowrite
cycles are expected to be rare, therefore typical accesses should not
see additional overhead.
VGA MMIO accesses are expected to be non-fatal regardless of the PCI
memory enable bit to allow legacy probing, this behavior remains with
a comment added. ioeventfds are now included in memory access testing,
with writes dropped while memory space is disabled.
Impose a limit on the number of watches that a user can hold so that
they can't use this mechanism to fill up all the available memory.
This is done by putting a counter in user_struct that's incremented when
a watch is allocated and decreased when it is released. If the number
exceeds the RLIMIT_NOFILE limit, the watch is rejected with EAGAIN.
This can be tested by the following means:
(1) Create a watch queue and attach it to fd 5 in the program given - in
this case, bash:
keyctl watch_session /tmp/nlog /tmp/gclog 5 bash
(2) In the shell, set the maximum number of files to, say, 99:
ulimit -n 99
(3) Add 200 keyrings:
for ((i=0; i<200; i++)); do keyctl newring a$i @s || break; done
(4) Try to watch all of the keyrings:
for ((i=0; i<200; i++)); do echo $i; keyctl watch_add 5 %:a$i || break; done
This should fail when the number of watches belonging to the user hits
99.
(5) Remove all the keyrings and all of those watches should go away:
for ((i=0; i<200; i++)); do keyctl unlink %:a$i; done
(6) Kill off the watch queue by exiting the shell spawned by
watch_session.
Fixes: c73be61cede5 ("pipe: Add general notification queue support") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When power_up_sst() fails, stream needs to be freed
just like when try_module_get() fails. However, current
code is returning directly and ends up leaking memory.
Fixes: 0121327c1a68b ("ASoC: Intel: mfld-pcm: add control for powering up/down dsp") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200813084112.26205-1-dinghao.liu@zju.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The key member of the runtime instrumentation control block contains
only the access key, not the complete storage key. Therefore the value
must be shifted by four bits. Since existing user space does not
necessarily query and set the access key correctly, just ignore the
user space provided key and use the correct one.
Note: this is only relevant for debugging purposes in case somebody
compiles a kernel with a default storage access key set to a value not
equal to zero.
The key member of the runtime instrumentation control block contains
only the access key, not the complete storage key. Therefore the value
must be shifted by four bits.
Note: this is only relevant for debugging purposes in case somebody
compiles a kernel with a default storage access key set to a value not
equal to zero.
Fixes: e4b8b3f33fca ("s390: add support for runtime instrumentation") Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Processing NETDEV_FEAT_CHANGE causes IPvlan links to lose
NETIF_F_LLTX feature because of the incorrect handling of
features in ipvlan_fix_features().
--before--
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~# ethtool -K ipvl0 tso off
Cannot change tcp-segmentation-offload
Actual changes:
vlan-challenged: off [fixed]
tx-lockless: off [fixed]
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: off [fixed]
lpaa10:~#
--after--
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~# ethtool -K ipvl0 tso off
Cannot change tcp-segmentation-offload
Could not change any device features
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~#
Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Mahesh Bandewar <maheshb@google.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When we tear down a network namespace, we unregister all
the netdevices within it. So we may queue a slave device
and a bonding device together in the same unregister queue.
If the only slave device is non-ethernet, it would
automatically unregister the bonding device as well. Thus,
we may end up unregistering the bonding device twice.
Workaround this special case by checking reg_state.
Fixes: 9b5e383c11b0 ("net: Introduce unregister_netdevice_many()") Reported-by: syzbot+af23e7f3e0a7e10c8b67@syzkaller.appspotmail.com Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to SAE J1939/21 (Chapter 5.12.3 and APPENDIX C), for transmit side
the required time interval between packets of a multipacket broadcast message
is 50 to 200 ms, the responder shall use a timeout of 250ms (provides margin
allowing for the maximumm spacing of 200ms). For receive side a timeout will
occur when a time of greater than 750 ms elapsed between two message packets
when more packets were expected.
So this patch fix and add rxtimer for multipacket broadcast session.
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1596599425-5534-5-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
If timeout occurs, j1939_tp_rxtimer() first calls hrtimer_start() to restart
rxtimer, and then calls __j1939_session_cancel() to set session->state =
J1939_SESSION_WAITING_ABORT. At next timeout expiration, because of the
J1939_SESSION_WAITING_ABORT session state j1939_tp_rxtimer() will call
j1939_session_deactivate_activate_next() to deactivate current session, and
rxtimer won't be set.
But for multipacket broadcast session, __j1939_session_cancel() don't set
session->state = J1939_SESSION_WAITING_ABORT, thus current session won't be
deactivate and hrtimer_start() is called to start new rxtimer again and again.
So fix it by moving session->state = J1939_SESSION_WAITING_ABORT out of if
(!j1939_cb_is_broadcast(&session->skcb)) statement.
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1596599425-5534-4-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently j1939_tp_im_involved_anydir() in j1939_tp_recv() check the previously
set flags J1939_ECU_LOCAL_DST and J1939_ECU_LOCAL_SRC of incoming skb, thus
multipacket broadcast message was aborted by receive side because it may come
from remote ECUs and have no exact dst address. Similarly, j1939_tp_cmd_recv()
and j1939_xtp_rx_dat() didn't process broadcast message.
So fix it by checking and process broadcast message in j1939_tp_recv(),
j1939_tp_cmd_recv() and j1939_xtp_rx_dat().
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1596599425-5534-2-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Broadcast mode bonds transmit a copy of all traffic simultaneously out of
all interfaces, so the "speed" of the bond isn't really the aggregate of
all interfaces, but rather, the speed of the slowest active interface.
Also, the type of the speed field is u32, not unsigned long, so adjust
that accordingly, as required to make min() function here without
complaining about mismatching types.
Fixes: bb5b052f751b ("bond: add support to read speed and duplex via ethtool") CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the reason of crashing system by add waiting time to finish reset
recovery process before starting remove driver procedure.
Now VSI is releasing if VSI is not in reset recovery mode.
Without this fix it was possible to start remove driver if other
processing command need reset recovery procedure which resulted in
null pointer dereference. VSI used by the ethtool process has been
cleared by remove driver process.
Fixes: 4b8164467b85 ("i40e: Add common function for finding VSI by type") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Trusted VF with unicast promiscuous mode set, could listen to TX
traffic of other VFs.
Set unicast promiscuous mode to RX traffic, if VSI has port VLAN
configured. Rename misleading I40E_AQC_SET_VSI_PROMISC_TX bit to
I40E_AQC_SET_VSI_PROMISC_RX_ONLY. Aligned unicast promiscuous with
VLAN to the one without VLAN.
Fixes: 6c41a7606967 ("i40e: Add promiscuous on VLAN support") Fixes: 3b1200891b7f ("i40e: When in promisc mode apply promisc mode to Tx Traffic as well") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Right now, igc_ptp_reset() is called from igc_reset(), which is called
from igc_probe() before igc_ptp_init() has a chance to run. It is
detected as an attempt to use an spinlock without registering its key
first. See log below.
To avoid this problem, simplify the initialization: igc_ptp_init() is
only called from igc_probe(), and igc_ptp_reset() is only called from
igc_reset().
Sometimes it makes no sense to search the skb by pkt.dpo, since we need
next the skb within the transaction block. This may happen if we have an
ETP session with CTS set to less than 255 packets.
After this patch, we will be able to work with ETP sessions where the
block size (ETP.CM_CTS byte 2) is less than 255 packets.
Reported-by: Henrique Figueira <henrislip@gmail.com> Reported-by: https://github.com/linux-can/can-utils/issues/228 Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20200807105200.26441-5-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Libbpf built in 32-bit mode should be careful about not conflating 64-bit BPF
pointers in BPF ELF file and host architecture pointers. This patch fixes
issue of incorrect initializating of map-in-map inner map slots due to such
difference.
Similar to patch ("bpf: sock_ops ctx access may stomp registers") if the
src_reg = dst_reg when reading the sk field of a sock_ops struct we
generate xlated code,
This stomps on the r9 reg to do the sk_fullsock check and then when
reading the skops->sk field instead of the sk pointer we get the
sk_fullsock. To fix use similar pattern noted in the previous fix
and use the temp field to save/restore a register used to do
sk_fullsock check.
Here r9 register was in-use so r8 is chosen as the temporary register.
In line 52 r8 is saved in temp variable and at line 54 restored in case
fullsock != 0. Finally we handle fullsock == 0 case by restoring at
line 58.
This adds a new macro SOCK_OPS_GET_SK it is almost possible to merge
this with SOCK_OPS_GET_FIELD, but I found the extra branch logic a
bit more confusing than just adding a new macro despite a bit of
duplicating code.
Fixes: 1314ef561102e ("bpf: export bpf_sock for BPF_PROG_TYPE_SOCK_OPS prog type") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/159718349653.4728.6559437186853473612.stgit@john-Precision-5820-Tower Signed-off-by: Sasha Levin <sashal@kernel.org>
So we get reasonable assembly, but still something was causing the null
pointer dereference. So, we load the programs and dump the xlated version
observing that line 0 above 'r* = *(u32 *)(r1 +96)' is going to be
translated by the skops access helpers.
Then we look at lines 0 and 2 above. In the good case we do the zero
check in r2 and then load 'r1 + 0' at line 2. Do a quick cross-check
into the bpf_sock_ops check and we can confirm that is the 'struct
sock *sk' pointer field. But, in the bad case,
Oh no, we read 'r1 +28' into r1, this is skops->fullsock and then in
line 2 we read the 'r1 +0' as a pointer. Now jumping back to our spat,
[18610.807284] BUG: unable to handle kernel NULL pointer dereference at 0000000000000001
The 0x01 makes sense because that is exactly the fullsock value. And
its not a valid dereference so we splat.
To fix we need to guard the case when a program is doing a sock_ops field
access with src_reg == dst_reg. This is already handled in the load case
where the ctx_access handler uses a tmp register being careful to
store the old value and restore it. To fix the get case test if
src_reg == dst_reg and in this case do the is_fullsock test in the
temporary register. Remembering to restore the temporary register before
writing to either dst_reg or src_reg to avoid smashing the pointer into
the struct holding the tmp variable.
Adding this inline code to test_tcpbpf_kern will now be generated
correctly from,
So three additional instructions if dst == src register, but I scanned
my current code base and did not see this pattern anywhere so should
not be a big deal. Further, it seems no one else has hit this or at
least reported it so it must a fairly rare pattern.
Fixes: 9b1f3d6e5af29 ("bpf: Refactor sock_ops_convert_ctx_access") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/159718347772.4728.2781381670567919577.stgit@john-Precision-5820-Tower Signed-off-by: Sasha Levin <sashal@kernel.org>
Seems like C++17 standard mode doesn't recognize typeof() anymore. This can
be tested by compiling test_cpp test with -std=c++17 or -std=c++1z options.
The use of typeof in skeleton generated code is unnecessary, all types are
well-known at the time of code generation, so remove all typeof()'s to make
skeleton code more future-proof when interacting with C++ compilers.
Most of the DAPM widgets for DSP ASoC components reuse reg field
of the widgets for its internal calculations, however these are not
real registers. So read/writes to these numbers are not really
valid. However ASoC core will read these registers to get default
state during startup.
With recent changes to ASoC core, every register read/write
failures are reported very verbosely. Prior to this fails to reads
are totally ignored, so we never saw any error messages.
To fix this add dummy read/write function to return default value.
Fixes: e3a33673e845 ("ASoC: qdsp6: q6routing: Add q6routing driver") Reported-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200811120205.21805-2-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Looks like the q6afe-dai dapm widget registers are set as "0",
which is a not correct.
As this registers will be read by ASoC core during startup
which will throw up errors, Fix this by making the registers
as SND_SOC_NOPM as these should be never used.
With recent changes to ASoC core, every register read/write
failures are reported very verbosely. Prior to this fails to reads
are totally ignored, so we never saw any error messages.
Fixes: 24c4cbcfac09 ("ASoC: qdsp6: q6afe: Add q6afe dai driver") Reported-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200811120205.21805-1-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
On big-endian machine, the returned register data when the exthdr is
present is not being compared correctly because little-endian is
assumed. The function nft_cmp_fast_mask(), called by nft_cmp_fast_eval()
and nft_cmp_fast_init(), calls cpu_to_le32().
The following dump also shows that little endian is assumed:
Lastly, debug print in nft_cmp_fast_init() and nft_cmp_fast_eval() when
RR option exists in the packet shows that the comparison fails because
the assumption:
v2: use nft_reg_store8() instead (Florian Westphal). Also to avoid the
warnings reported by kernel test robot.
Fixes: dbb5281a1f84 ("netfilter: nf_tables: add support for matching IPv4 options") Fixes: c078ca3b0c5b ("netfilter: nft_exthdr: Add support for existence check") Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, system zones just track ranges of block, that are "important"
fs metadata (bitmaps, group descriptors, journal blocks, etc.). This
however complicates how extent tree (or indirect blocks) can be checked
for inodes that actually track such metadata - currently the journal
inode but arguably we should be treating quota files or resize inode
similarly. We cannot run __ext4_ext_check() on such metadata inodes when
loading their extents as that would immediately trigger the validity
checks and so we just hack around that and special-case the journal
inode. This however leads to a situation that a journal inode which has
extent tree of depth at least one can have invalid extent tree that gets
unnoticed until ext4_cache_extents() crashes.
To overcome this limitation, track inode number each system zone belongs
to (0 is used for zones not belonging to any inode). We can then verify
inode number matches the expected one when verifying extent tree and
thus avoid the false errors. With this there's no need to to
special-case journal inode during extent tree checking anymore so remove
it.
Fixes: 0a944e8a6c66 ("ext4: don't perform block validity checks on the journal inode") Reported-by: Wolfgang Frisch <wolfgang.frisch@suse.com> Reviewed-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200728130437.7804-4-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, add_system_zone() just silently merges two added system zones
that overlap. However the overlap should not happen and it generally
suggests that some unrelated metadata overlap which indicates the fs is
corrupted. We should have caught such problems earlier (e.g. in
ext4_check_descriptors()) but add this check as another line of defense.
In later patch we also use this for stricter checking of journal inode
extent tree.
Reviewed-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200728130437.7804-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
If for any reason a directory passed to do_split() does not have enough
active entries to exceed half the size of the block, we can end up
iterating over all "count" entries without finding a split point.
In this case, count == move, and split will be zero, and we will
attempt a negative index into map[].
Guard against this by detecting this case, and falling back to
split-to-half-of-count instead; in this case we will still have
plenty of space (> half blocksize) in each split block.
Fixes: ef2b02d3e617 ("ext34: ensure do_split leaves enough free space in both blocks") Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/f53e246b-647c-64bb-16ec-135383c70ad7@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
The kernel signalfd4() syscall returns different error codes when called
either in compat or native mode. This behaviour makes correct emulation
in qemu and testing programs like LTP more complicated.
Fix the code to always return -in both modes- EFAULT for unaccessible user
memory, and EINVAL when called with an invalid signal mask.
These accessors must be used to read/write a big-endian bus. The value
returned or written is native-endian.
However, these accessors are defined using be{16,32}_to_cpu() or
cpu_to_be{16,32}() to make the endian conversion but these expect a
__be{16,32} when none is present. Keeping them would need a force cast
that would solve nothing at all.
So, do the conversion using swab{16,32}, like done in asm-generic for
similar situations.
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Link: http://lkml.kernel.org/r/20200622114232.80039-1-luc.vanoostenryck@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>