For some GPUs with more CUs, the original sibling_map[32]
in struct crat_subtype_cache is not enough
to save the cache information when create the VCRAT table,
so skip filling the struct crat_subtype_cache info instead
fill struct kfd_cache_properties directly to fix this problem.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 829c1651e9c4 ("sched/fair: sanitize vruntime of entity being placed")
fixes an overflowing bug, but ignore a case that se->exec_start is reset
after a migration.
For fixing this case, we delay the reset of se->exec_start after
placing the entity which se->exec_start to detect long sleeping task.
In order to take into account a possible divergence between the clock_task
of 2 rqs, we increase the threshold to around 104 days.
Fixes: 829c1651e9c4 ("sched/fair: sanitize vruntime of entity being placed") Originally-by: Zhang Qiao <zhangqiao22@huawei.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Zhang Qiao <zhangqiao22@huawei.com> Link: https://lore.kernel.org/r/20230317160810.107988-1-vincent.guittot@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a scheduling entity is placed onto cfs_rq, its vruntime is pulled
to the base level (around cfs_rq->min_vruntime), so that the entity
doesn't gain extra boost when placed backwards.
However, if the entity being placed wasn't executed for a long time, its
vruntime may get too far behind (e.g. while cfs_rq was executing a
low-weight hog), which can inverse the vruntime comparison due to s64
overflow. This results in the entity being placed with its original
vruntime way forwards, so that it will effectively never get to the cpu.
To prevent that, ignore the vruntime of the entity being placed if it
didn't execute for much longer than the characteristic sheduler time
scale.
When neither "no_read_workqueue" nor "no_write_workqueue" are enabled,
tasklet_trylock() in crypt_dec_pending() may still return false due to
an uninitialized state, and dm-crypt will unnecessarily do io completion
in io_queue workqueue instead of current context.
Fix this by adding an 'in_tasklet' flag to dm_crypt_io struct and
initialize it to false in crypt_io_init(). Set this flag to true in
kcryptd_queue_crypt() before calling tasklet_schedule(). If set
crypt_dec_pending() will punt io completion to a workqueue.
This also nicely avoids the tasklet_trylock/unlock hack when tasklets
aren't in use.
Fixes: 8e14f610159d ("dm crypt: do not call bio_endio() from the dm-crypt tasklet") Cc: stable@vger.kernel.org Reported-by: Hou Tao <houtao1@huawei.com> Suggested-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The data->block[0] variable comes from user and is a number between
0-255. Without proper check, the variable may be very large to cause
an out-of-bounds when performing memcpy in slimpro_i2c_blkwr.
If bus type is other than imx50_weim_devtype and have no child devices,
variable 'ret' in function weim_parse_dt() will not be initialized, but
will be used as branch condition and return value. Fix this by
initializing 'ret' with 0.
This was discovered with help of clang-analyzer, but the situation is
quite possible in real life.
exit_mmap() will tear down the VMAs and maple tree with the mmap_lock held
in write mode. Ensure that the maple tree is still valid by checking
ksm_test_exit() after taking the mmap_lock in read mode, but before the
for_each_vma() iterator dereferences a destroyed maple tree.
Since the maple tree is destroyed, the flags telling lockdep to check an
external lock has been cleared. Skip the for_each_vma() iterator to avoid
dereferencing a maple tree without the external lock flag, which would
create a lockdep warning.
The slice IDs for CVPFW, CPUSS1 and CPUWHT currently overflow the 32bit
LLCC config registers, which means it is writing beyond the upper limit
of the ATTR0_CFGn and ATTR1_CFGn range of registers. But the most obvious
impact is the fact that the mentioned slices do not get configured at all,
which will result in reduced performance. Fix that by using the slice ID
values taken from the latest LLCC SC table.
Fixes: ec69dfbdc426 ("soc: qcom: llcc: Add sc8180x and sc8280xp configurations") Cc: stable@vger.kernel.org # 5.19+ Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Tested-by: Juerg Haefliger <juerg.haefliger@canonical.com> Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230306135527.509796-1-abel.vesa@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The iommu mask should be 0x3f as per Qualcomm internal documentation.
Without the correct mask, the PCIe transactions from the endpoint will
result in SMMU faults. Hence, fix it!
If the controller is not marked as cache coherent, then kernel will
try to ensure coherency during dma-ops and that may cause data corruption.
So, mark the PCIe node as dma-coherent as the devices on PCIe bus are
cache coherent.
When mailboxes are used as a transport it is possible to setup the SCMI
transport layer, depending on the underlying channels configuration, to use
one or two mailboxes, associated, respectively, to one or two, distinct,
shared memory areas: any other combination should be treated as invalid.
Add more strict checking of SCMI mailbox transport device node descriptors.
Fixes: 5c8a47a5a91d ("firmware: arm_scmi: Make scmi core independent of the transport type") Cc: <stable@vger.kernel.org> # 4.19 Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20230307162324.891866-1-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a potential race condition in amdtee_open_session that may
lead to use-after-free. For instance, in amdtee_open_session() after
sess->sess_mask is set, and before setting:
sess->session_info[i] = session_info;
if amdtee_close_session() closes this same session, then 'sess' data
structure will be released, causing kernel panic when 'sess' is
accessed within amdtee_open_session().
The solution is to set the bit sess->sess_mask as the last step in
amdtee_open_session().
There are two related issues that appear in certain combinations with
clang and GNU binutils.
The first occurs when a version of clang that supports zicsr or zifencei
via '-march=' [1] (i.e, >= 17.x) is used in combination with a version
of GNU binutils that do not recognize zicsr and zifencei in the
'-march=' value (i.e., < 2.36):
riscv64-linux-gnu-ld: -march=rv64i2p0_m2p0_a2p0_c2p0_zicsr2p0_zifencei2p0: Invalid or unknown z ISA extension: 'zifencei'
riscv64-linux-gnu-ld: failed to merge target specific data of file fs/efivarfs/file.o
riscv64-linux-gnu-ld: -march=rv64i2p0_m2p0_a2p0_c2p0_zicsr2p0_zifencei2p0: Invalid or unknown z ISA extension: 'zifencei'
riscv64-linux-gnu-ld: failed to merge target specific data of file fs/efivarfs/super.o
The second occurs when a version of clang that does not support zicsr or
zifencei via '-march=' (i.e., <= 16.x) is used in combination with a
version of GNU as that defaults to a newer ISA base spec, which requires
specifying zicsr and zifencei in the '-march=' value explicitly (i.e, >=
2.38):
../arch/riscv/kernel/kexec_relocate.S: Assembler messages:
../arch/riscv/kernel/kexec_relocate.S:147: Error: unrecognized opcode `fence.i', extension `zifencei' required
clang-12: error: assembler command failed with exit code 1 (use -v to see invocation)
This is the same issue addressed by commit 6df2a016c0c8 ("riscv: fix
build with binutils 2.38") (see [2] for additional information) but
older versions of clang miss out on it because the cc-option check
fails:
clang-12: error: invalid arch name 'rv64imac_zicsr_zifencei', unsupported standard user-level extension 'zicsr'
clang-12: error: invalid arch name 'rv64imac_zicsr_zifencei', unsupported standard user-level extension 'zicsr'
To resolve the first issue, only attempt to add zicsr and zifencei to
the march string when using the GNU assembler 2.38 or newer, which is
when the default ISA spec was updated, requiring these extensions to be
specified explicitly. LLVM implements an older version of the base
specification for all currently released versions, so these instructions
are available as part of the 'i' extension. If LLVM's implementation is
updated in the future, a CONFIG_AS_IS_LLVM condition can be added to
CONFIG_TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI.
To resolve the second issue, use version 2.2 of the base ISA spec when
using an older version of clang that does not support zicsr or zifencei
via '-march=', as that is the spec version most compatible with the one
clang/LLVM implements and avoids the need to specify zicsr and zifencei
explicitly due to still being a part of 'i'.
Currently, we pass the CONTEXTID instead of the ASID to the TLB flush
function. We should only take the ASID field to prevent from touching
the reserved bit field.
For GC IP v11.0.4/11, PSP TMR need to be reserved
for ASIC mode2 reset. But for S4, when psp suspend,
it will destroy the TMR that fails the ASIC reset.
intel_crtc_prepare_cleared_state() is unintentionally losing
the "inherited" flag. This will happen if intel_initial_commit()
is forced to go through the full modeset calculations for
whatever reason.
Afterwards the first real commit from userspace will not get
forced to the full modeset path, and thus eg. audio state may
not get recomputed properly. So if the monitor was already
enabled during boot audio will not work until userspace itself
does an explicit full modeset.
debug_active_activate() expected ref->count to be zero
which is not true anymore as __i915_active_activate() calls
debug_active_activate() after incrementing the count.
v2: No need to check for "ref->count == 1" as __i915_active_activate()
already make sure of that(Janusz).
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6733 Fixes: 04240e30ed06 ("drm/i915: Skip taking acquire mutex for no ref->active callback") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Thomas Hellström <thomas.hellstrom@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230313114613.9874-1-nirmoy.das@intel.com
(cherry picked from commit bfad380c542438a9b642f8190b7fd37bc77e2723) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
S2idle resume freeze can be observed on Intel ADL + AMD WX5500. This is
caused by commit 0064b0ce85bb ("drm/amd/pm: enable ASPM by default").
The root cause is still not clear for now.
So extend and apply the ASPM quirk from commit e02fe3bc7aba
("drm/amdgpu: vi: disable ASPM on Intel Alder Lake based systems"), to
workaround the issue on Navi cards too.
Fixes: 0064b0ce85bb ("drm/amd/pm: enable ASPM by default") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2458 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Returns EPROBE_DEFER when of_drm_find_bridge() fails, this is consistent
with what all the other DRM bridge drivers are doing and this is
required since the bridge might not be there when the driver is probed
and this should not be a fatal failure.
Cc: <stable@vger.kernel.org> Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by: Matheus Castello <matheus.castello@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230322143821.109744-1-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ioctl helper function nilfs_ioctl_wrap_copy(), which exchanges a
metadata array to/from user space, may copy uninitialized buffer regions
to user space memory for read-only ioctl commands NILFS_IOCTL_GET_SUINFO
and NILFS_IOCTL_GET_CPINFO.
This can occur when the element size of the user space metadata given by
the v_size member of the argument nilfs_argv structure is larger than the
size of the metadata element (nilfs_suinfo structure or nilfs_cpinfo
structure) on the file system side.
KMSAN-enabled kernels detect this issue as follows:
When ieee80211_select_queue is called for mesh, the sta pointer is usually
NULL, since the nexthop is looked up much later in the tx path.
Explicitly check for unicast address in that case in order to make qos work
again.
Cc: stable@vger.kernel.org Fixes: 50e2ab392919 ("wifi: mac80211: fix queue selection for mesh/OCB interfaces") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230314095956.62085-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ksmbd disconnect connection when mounting with vers=smb1.
ksmbd should send smb1 negotiate response to client for correct
unsupported error return. This patch add needed SMB1 macros and fill
NegProt part of the response for smb1 negotiate response.
Cc: stable@vger.kernel.org Reported-by: Steve French <stfrench@microsoft.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ksmbd returned "Input/output error" when mounting with vers=2.0 to
ksmbd. It should return STATUS_NOT_SUPPORTED on unsupported smb2.0
dialect.
Cc: stable@vger.kernel.org Reported-by: Steve French <stfrench@microsoft.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve reported that inactive sessions are terminated after a few
seconds. ksmbd terminate when receiving -EAGAIN error from
kernel_recvmsg(). -EAGAIN means there is no data available in timeout.
So ksmbd should keep connection with unlimited retries instead of
terminating inactive sessions.
Cc: stable@vger.kernel.org Reported-by: Steve French <stfrench@microsoft.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If vfs objects = streams_xattr in ksmbd.conf FILE_NAMED_STREAMS should
be set to Attributes in FS_ATTRIBUTE_INFORMATION. MacOS client show
"Format: SMB (Unknown)" on faked NTFS and no streams support.
MacOS and Win11 support AES256 encrytion and it is included in the cipher
array of encryption context. Especially on macOS, The most preferred
cipher is AES256. Connecting to ksmbd fails on newer MacOS clients that
support AES256 encryption. MacOS send disconnect request after receiving
final session setup response from ksmbd. Because final session setup is
signed with signing key was generated incorrectly.
For signging key, 'L' value should be initialized to 128 if key size is
16bytes.
Patch series "Fix mas_skip_node() for mas_empty_area()", v2.
mas_empty_area() was incorrectly returning an error when there was room.
The issue was tracked down to mas_skip_node() using the incorrect
end-of-slot count. Instead of using the nodes hard limit, the limit of
data should be used.
mas_skip_node() was also setting the min and max to that of the child
node, which was unnecessary. Within these limits being set, there was
also a bug that corrupted the maple state's max if the offset was set to
the maximum node pivot. The bug was without consequence unless there was
a sufficient gap in the next child node which would cause an error to be
returned.
This patch set fixes these errors by removing the limit setting from
mas_skip_node() and uses the mas_data_end() for slot limits, and adds
tests for all failures discovered.
This patch (of 2):
mas_skip_node() is used to move the maple state to the node with a higher
limit. It does this by walking up the tree and increasing the slot count.
Since slot count may not be able to be increased, it may need to walk up
multiple times to find room to walk right to a higher limit node. The
limit of slots that was being used was the node limit and not the last
location of data in the node. This would cause the maple state to be
shifted outside actual data and enter an error state, thus returning
-EBUSY.
The result of the incorrect error state means that mas_awalk() would
return an error instead of finding the allocation space.
The fix is to use mas_data_end() in mas_skip_node() to detect the nodes
data end point and continue walking the tree up until it is safe to move
to a node with a higher limit.
The walk up the tree also sets the maple state limits so remove the buggy
code from mas_skip_node(). Setting the limits had the unfortunate side
effect of triggering another bug if the parent node was full and the there
was no suitable gap in the second last child, but room in the next child.
mas_skip_node() may also be passed a maple state in an error state from
mas_anode_descend() when no allocations are available. Return on such an
error state immediately.
Test robust filling of an entire area of the tree, then test one beyond.
This is to test the walking back up the tree at the end of nodes and error
condition. Test inspired by the reproducer code provided by Snild Dolkow.
The last test in the function tests for the case of a corrupted maple
state caused by the incorrect limits set during mas_skip_node(). There
needs to be a gap in the second last child and last child, but the search
must rule out the second last child's gap. This would avoid correcting
the maple state to the correct max limit and return an error.
should_skip_kasan_poison() reads the PG_skip_kasan_poison flag from
page->flags. However, this line of code in free_pages_prepare():
page->flags &= ~PAGE_FLAGS_CHECK_AT_PREP;
clears most of page->flags, including PG_skip_kasan_poison, before calling
should_skip_kasan_poison(), which meant that it would never return true as
a result of the page flag being set. Therefore, fix the code to call
should_skip_kasan_poison() before clearing the flags, as we were doing
before the reverted patch.
This fixes a measurable performance regression introduced in the reverted
commit, where munmap() takes longer than intended if HW tags KASAN is
supported and enabled at runtime. Without this patch, we see a
single-digit percentage performance regression in a particular
mmap()-heavy benchmark when enabling HW tags KASAN, and with the patch,
there is no statistically significant performance impact when enabling HW
tags KASAN.
When fixed files are unregistered, file_alloc_end and alloc_hint
are not cleared. This can later cause a NULL pointer dereference in
io_file_bitmap_get() if auto index selection is enabled via
IORING_FILE_INDEX_ALLOC:
Since io_uring does nonblocking connect requests, if we do two repeated
ones without having a listener, the second will get -ECONNABORTED rather
than the expected -ECONNREFUSED. Treat -ECONNABORTED like a normal retry
condition if we're nonblocking, if we haven't already seen it.
Nathan reported that when building with GNU as and a version of clang that
defaults to DWARF5:
$ make -skj"$(nproc)" ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- \
LLVM=1 LLVM_IAS=0 O=build \
mrproper allmodconfig mm/kfence/kfence_test.o
/tmp/kfence_test-08a0a0.s: Assembler messages:
/tmp/kfence_test-08a0a0.s:14627: Error: non-constant .uleb128 is not supported
/tmp/kfence_test-08a0a0.s:14628: Error: non-constant .uleb128 is not supported
/tmp/kfence_test-08a0a0.s:14632: Error: non-constant .uleb128 is not supported
/tmp/kfence_test-08a0a0.s:14633: Error: non-constant .uleb128 is not supported
/tmp/kfence_test-08a0a0.s:14639: Error: non-constant .uleb128 is not supported
...
This is because `-g` defaults to the compiler debug info default. If the
assembler does not support some of the directives used, the above errors
occur. To fix, remove the explicit passing of `-g`.
All the test wants is that stack traces print valid function names, and
debug info is not required for that. (I currently cannot recall why I
added the explicit `-g`.)
Link: https://lkml.kernel.org/r/20230316224705.709984-1-elver@google.com Fixes: bc8fbc5f305a ("kfence: add test suite") Signed-off-by: Marco Elver <elver@google.com> Reported-by: Nathan Chancellor <nathan@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable kfence_metadata is initialized in kfence_init_pool(), then,
it is not initialized if kfence is disabled after booting. In this case,
kfence_metadata will be used (e.g. ->lock and ->state fields) without
initialization when reading /sys/kernel/debug/kfence/objects. There will
be a warning if you enable CONFIG_DEBUG_SPINLOCK. Fix it by creating
debugfs files when necessary.
Link: https://lkml.kernel.org/r/20230315034441.44321-1-songmuchun@bytedance.com Fixes: 0ce20dd84089 ("mm: add Kernel Electric-Fence infrastructure") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Tested-by: Marco Elver <elver@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jann Horn <jannh@google.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 130a96d698d7 ("usb: typec: ucsi: acpi: Increase command
completion timeout value") increased the timeout from 5 seconds
to 60 seconds due to issues related to alternate mode discovery.
After the alternate mode discovery switch to polled mode
the timeout was reduced, but instead of being set back to
5 seconds it was reduced to 1 second.
This is causing problems when using a Lenovo ThinkPad X1 yoga gen7
connected over Type-C to a LG 27UL850-W (charging DP over Type-C).
When the monitor is already connected at boot the following error
is logged: "PPM init failed (-110)", /sys/class/typec is empty and
on unplugging the NULL pointer deref fixed earlier in this series
happens.
When the monitor is connected after boot the following error
is logged instead: "GET_CONNECTOR_STATUS failed (-110)".
Setting the timeout back to 5 seconds fixes both cases.
Fixes: e08065069fc7 ("usb: typec: ucsi: acpi: Reduce the command completion timeout") Cc: stable@vger.kernel.org Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230308154244.722337-4-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When ucsi_init() fails, ucsi->connector is NULL, yet in case of
ucsi_acpi we may still get events which cause the ucs_acpi code to call
ucsi_connector_change(), which then derefs the NULL ucsi->connector
pointer.
Fix this by not setting ucsi->ntfy inside ucsi_init() until ucsi_init()
has succeeded, so that ucsi_connector_change() ignores the events
because UCSI_ENABLE_NTFY_CONNECTOR_CHANGE is not set in the ntfy mask.
Previously, there was a 100uS delay inserted after issuing an end transfer
command for specific controller revisions. This was due to the fact that
there was a GUCTL2 bit field which enabled synchronous completion of the
end transfer command once the CMDACT bit was cleared in the DEPCMD
register. Since this bit does not exist for all controller revisions and
the current implementation heavily relies on utizling the EndTransfer
command completion interrupt, add the delay back in for uses where the
interrupt on completion bit is not set, and increase the duration to 1ms
for the controller to complete the command.
An issue was seen where the USB request buffer was unmapped while the DWC3
controller was still accessing the TRB. However, it was confirmed that the
end transfer command was successfully submitted. (no end transfer timeout)
In situations, such as dwc3_gadget_soft_disconnect() and
__dwc3_gadget_ep_disable(), the dwc3_remove_request() is utilized, which
will issue the end transfer command, and follow up with
dwc3_gadget_giveback(). At least for the USB ep disable path, it is
required for any pending and started requests to be completed and returned
to the function driver in the same context of the disable call. Without
the GUCTL2 bit, it is not ensured that the end transfer is completed before
the buffers are unmapped.
The user may call role_store() when driver is handling
ci_handle_id_switch() which is triggerred by otg event or power lost
event. Unfortunately, the controller may go into chaos in this case.
Fix this by protecting it with mutex lock.
In some cases, driver trees to send Status Stage twice.
The first one from upper layer of gadget usb subsystem and
second time from controller driver.
This patch fixes this issue and remove tricky handling of
SET_INTERFACE from controller driver which is no longer
needed.
cc: <stable@vger.kernel.org> Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20230307111420.376056-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI based platform can have more than two PCI functions.
USBSS PCI Glue driver during initialization should
consider only DRD/HOST/DEVICE PCI functions and
all other should be ignored. This patch adds additional
condition which causes that only DRD and HOST/DEVICE
function will be accepted.
For this case, the state machine could still send out discover
identity message later if we skip current discover_identity message.
So we should handle the received message firstly and override the pending
discover_identity message without warning in this case. Then, a delayed
send_discover work will send discover_identity message again.
Fixes: e00943e91678 ("usb: typec: tcpm: PD3.0 sinks can send Discover Identity even in device mode")
cc: <stable@vger.kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230216031515.4151117-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernel will dump in the below cases:
sysfs: cannot create duplicate filename
'/devices/virtual/usb_power_delivery/pd1/source-capabilities'
1. After soft reset has completed, an Explicit Contract negotiation occurs.
The sink device will receive source capabilitys again. This will cause
a duplicate source-capabilities file be created.
2. Power swap twice on a device that is initailly sink role.
This will unregister existing capabilities when above cases occurs.
Fixes: 8203d26905ee ("usb: typec: tcpm: Register USB Power Delivery Capabilities")
cc: <stable@vger.kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230215054951.238394-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is an already known issue that dm-thin volume cannot be used as
swap, otherwise a deadlock may happen when dm-thin internal memory
demand triggers swap I/O on the dm-thin volume itself.
But thanks to commit a666e5c05e7c ("dm: fix deadlock when swapping to
encrypted device"), the limit_swap_bios target flag can also be used
for dm-thin to avoid the recursive I/O when it is used as swap.
Fix is to simply set ti->limit_swap_bios to true in both pool_ctr()
and thin_ctr().
In my test, I create a dm-thin volume /dev/vg/swap and use it as swap
device. Then I run fio on another dm-thin volume /dev/vg/main and use
large --blocksize to trigger swap I/O onto /dev/vg/swap.
The following fio command line is used in my test,
fio --name recursive-swap-io --lockmem 1 --iodepth 128 \
--ioengine libaio --filename /dev/vg/main --rw randrw \
--blocksize 1M --numjobs 32 --time_based --runtime=12h
Without this fix, the whole system can be locked up within 15 seconds.
With this fix, there is no any deadlock or hung task observed after
2 hours of running fio.
Furthermore, if blocksize is changed from 1M to 128M, after around 30
seconds fio has no visible I/O, and the out-of-memory killer message
shows up in kernel message. After around 20 minutes all fio processes
are killed and the whole system is back to being alive.
This is exactly what is expected when recursive I/O happens on dm-thin
volume when it is used as swap.
Depends-on: a666e5c05e7c ("dm: fix deadlock when swapping to encrypted device") Cc: stable@vger.kernel.org Signed-off-by: Coly Li <colyli@suse.de> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the igb_disable_sriov() will call pci_disable_sriov() before
releasing any resources, the netdev core will synchronize the cleanup to
avoid any races. This patch removes the useless rtnl_(un)lock to guarantee
correctness.
CC: stable@vger.kernel.org Fixes: 6faee3d4ee8b ("igb: Add lock to avoid data race") Reported-by: Corinna Vinschen <vinschen@redhat.com> Link: https://lore.kernel.org/intel-wired-lan/ZAcJvkEPqWeJHO2r@calimero.vinschen.de/ Signed-off-by: Lin Ma <linma@zju.edu.cn> Tested-by: Corinna Vinschen <vinschen@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 6930bcbfb6ce dropped the setting of the file_lock range when
decoding a nlm_lock off the wire. This causes the client side grant
callback to miss matching blocks and reject the lock, only to rerequest
it 30s later.
Add a helper function to set the file_lock range from the start and end
values that the protocol uses, and have the nlm_lock decoder call that to
set up the file_lock args properly.
Fixes: 6930bcbfb6ce ("lockd: detect and reject lock arguments that overflow") Reported-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Tested-by: Amir Goldstein <amir73il@gmail.com> Cc: stable@vger.kernel.org #6.0 Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
WQ_UNBOUND causes significant scheduler latency on ARM64/Android. This
is problematic for latency sensitive workloads, like I/O
post-processing.
Removing WQ_UNBOUND gives a 96% reduction in fsverity workqueue related
scheduler latency and improves app cold startup times by ~30ms.
WQ_UNBOUND was also removed from the dm-verity workqueue for the same
reason [1].
This code was tested by running Android app startup benchmarks and
measuring how long the fsverity workqueue spent in the runnable state.
Before
Total workqueue scheduler latency: 553800us
After
Total workqueue scheduler latency: 18962us
fscrypt_destroy_keyring() must be called after all potentially-encrypted
inodes were evicted; otherwise it cannot safely destroy the keyring.
Since inodes that are in-use by the Landlock LSM don't get evicted until
security_sb_delete(), this means that fscrypt_destroy_keyring() must be
called *after* security_sb_delete().
This fixes a WARN_ON followed by a NULL dereference, only possible if
Landlock was being used on encrypted files.
mm/slab.c: In function ‘slab_memory_callback’:
mm/slab.c:1127:23: error: implicit declaration of function ‘init_cache_node_node’; did you mean ‘drain_cache_node_node’? [-Werror=implicit-function-declaration]
1127 | ret = init_cache_node_node(nid);
| ^~~~~~~~~~~~~~~~~~~~
| drain_cache_node_node
The #ifdef condition protecting the definition of init_cache_node_node()
no longer matches the conditions protecting the (multiple) users.
Fix this by syncing the conditions.
Fixes: 76af6a054da40553 ("mm/migrate: add CPU hotplug to demotion #ifdef") Reported-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/b5bdea22-ed2f-3187-6efe-0c72330270a4@infradead.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup
for all arches") moved the sysfb_apply_efi_quirks() call in sysfb_init()
from before the [sysfb_]parse_mode() call to after it.
But sysfb_apply_efi_quirks() modifies the global screen_info struct which
[sysfb_]parse_mode() parses, so doing it later is too late.
This has broken all DMI based quirks for correcting wrong firmware efifb
settings when simpledrm is used.
To fix this move the sysfb_apply_efi_quirks() call back to its old place
and split the new setup of the efifb_fwnode (which requires
the platform_device) into its own function and call that at
the place of the moved sysfb_apply_efi_quirks(pd) calls.
Fixes: 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup for all arches") Cc: stable@vger.kernel.org Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a potential race condition in hci_cmd_sync_work and
hci_cmd_sync_clear, and could lead to use-after-free. For instance,
hci_cmd_sync_work is added to the 'req_workqueue' after cancel_work_sync
The entry of 'cmd_sync_work_list' may be freed in hci_cmd_sync_clear, and
causing kernel panic when it is used in 'hci_cmd_sync_work'.
btrfs_can_activate_zone() returns true if at least one device has one zone
available for activation. This is OK for the single profile, but not OK for
DUP profile. We need two zones to create a DUP block group. Fix it by
properly handling the case with the profile flags.
Fixes: 265f7237dd25 ("btrfs: zoned: allow DUP on meta-data block groups") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the unbind callback for f_uac1 and f_uac2, a call to snd_card_free()
via g_audio_cleanup() will disconnect the card and then wait for all
resources to be released, which happens when the refcount falls to zero.
Since userspace can keep the refcount incremented by not closing the
relevant file descriptor, the call to unbind may block indefinitely.
This can cause a deadlock during reboot, as evidenced by the following
blocked task observed on my machine:
The issue can also be observed by opening the card with arecord and
then stopping the process through the shell before unbinding:
# arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null
Recording WAVE '/dev/null' : Signed 32 bit Little Endian, Rate 48000 Hz, Stereo
^Z[1]+ Stopped arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null
# echo gadget.0 > /sys/bus/gadget/drivers/configfs-gadget/unbind
(observe that the unbind command never finishes)
Fix the problem by using snd_card_free_when_closed() instead, which will
still disconnect the card as desired, but defer the task of freeing the
resources to the core once userspace closes its file descriptor.
Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver") Cc: stable@vger.kernel.org Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Reviewed-by: John Keeping <john@metanate.com> Link: https://lore.kernel.org/r/20230302163648.3349669-1-alvin@pqrs.dk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Each time the platform goes to low power, PM suspend / resume routines
call: __dwc2_lowlevel_hw_enable -> devm_add_action_or_reset().
This adds a new devres each time.
This may also happen at runtime, as dwc2_lowlevel_hw_enable() can be
called from udc_start().
This can be seen with tracing:
- echo 1 > /sys/kernel/debug/tracing/events/dev/devres_log/enable
- go to low power
- cat /sys/kernel/debug/tracing/trace
A new "ADD" entry is found upon each low power cycle:
... devres_log: 49000000.usb-otg ADD 82a13bba devm_action_release (8 bytes)
... devres_log: 49000000.usb-otg ADD 49889daf devm_action_release (8 bytes)
...
A second issue is addressed here:
- regulator_bulk_enable() is called upon each PM cycle (suspend/resume).
- regulator_bulk_disable() never gets called.
So the reference count for these regulators constantly increase, by one
upon each low power cycle, due to missing regulator_bulk_disable() call
in __dwc2_lowlevel_hw_disable().
The original fix that introduced the devm_add_action_or_reset() call,
fixed an issue during probe, that happens due to other errors in
dwc2_driver_probe() -> dwc2_core_reset(). Then the probe fails without
disabling regulators, when dr_mode == USB_DR_MODE_PERIPHERAL.
Rather fix the error path: disable all the low level hardware in the
error path, by using the "hsotg->ll_hw_enabled" flag. Checking dr_mode
has been introduced to avoid a dual call to dwc2_lowlevel_hw_disable().
"ll_hw_enabled" should achieve the same (and is used currently in the
remove() routine).
Some boards might use USB-A female connector for USB ports, however,
the port could be connected to a dual-mode USB controller, making it
also behaves as a peripheral device if male-to-male cable is connected.
After boot, dwc2_ovr_init() sets GOTGCTL to GOTGCTL_AVALOVAL and call
dwc2_force_mode() with parameter host=false, which causes inconsistent
mode - The hardware is in peripheral mode while the kernel status is
in host mode.
What we can do now is to call dwc2_drd_role_sw_set() to switch to
device mode, and everything should work just fine now, even switching
back to none(default) mode afterwards.
Add support for Microchip USB2517 USB 2.0 hub to the onboard usb hub
driver. Adopt the generic usb-device compatible ("usbVID,PID").
This hub has the same reset timings as USB2514, so reuse that one.
There is also an USB2517I which just has industrial temperature range.
Xiaomi Poco F1 (qcom/sdm845-xiaomi-beryllium*.dts) comes with a SKhynix
H28U74301AMR UFS. The sd_read_cpr() operation leads to a 120 second
timeout, making the device bootup very slow:
__copy_xstate_to_uabi_buf() copies either from the tasks XSAVE buffer
or from init_fpstate into the ptrace buffer. Dynamic features, like
XTILEDATA, have an all zeroes init state and are not saved in
init_fpstate, which means the corresponding bit is not set in the
xfeatures bitmap of the init_fpstate header.
But __copy_xstate_to_uabi_buf() retrieves addresses for both the tasks
xstate and init_fpstate unconditionally via __raw_xsave_addr().
So if the tasks XSAVE buffer has a dynamic feature set, then the
address retrieval for init_fpstate triggers the warning in
__raw_xsave_addr() which checks the feature bit in the init_fpstate
header.
Remove the address retrieval from init_fpstate for extended features.
They have an all zeroes init state so init_fpstate has zeros for them.
Then zeroing the user buffer for the init state is the same as copying
them from init_fpstate.
Get rid of any prefix paths in @path before lookup_positive_unlocked()
as it will call ->lookup() which already adds those prefix paths
through build_path_from_dentry().
This has caused a performance regression when mounting shares with a
prefix path where readdir(2) would end up retrying several times to
open bad directory names that contained duplicate prefix paths.
Fix this by skipping any prefix paths in @path before calling
lookup_positive_unlocked().
Fixes: e4029e072673 ("cifs: find and use the dentry for cached non-root directories also") Cc: stable@vger.kernel.org # 6.1+ Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the output of /proc/fs/cifs/open_files, we only print
the tree id for the tcon of each open file. It becomes
difficult to know which tcon these files belong to with
just the tree id.
This change dumps ses id in addition to all other data today.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, we only dump the pending mid information only
on the primary channel in /proc/fs/cifs/DebugData.
If multichannel is active, we do not print the pending MID
list on secondary channels.
This change will dump the pending mids for all the channels
based on server->conn_id.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When querying server interfaces returns -EOPNOTSUPP,
clear the list of interfaces. Assumption is that multichannel
would be disabled too.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have the server interface list hanging off the tcon
structure today for reasons unknown. So each tcon which is
connected to a file server can query them separately,
which is really unnecessary. To avoid this, in the query
function, we will check the time of last update of the
interface list, and avoid querying the server if it is
within a certain range.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We do not dump the file path for smb3_open_enter ftrace
calls, which is a severe handicap while debugging
using ftrace evens. This change adds that info.
Unfortunately, we're not updating the path in open params
in many places; which I had to do as a part of this change.
SMB2_open gets path in utf16 format, but it's easier of
path is supplied as char pointer in oparms.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Coverity had rightly indicated a possible deadlock
due to chan_lock being done inside match_session.
All callers of match_* functions should pick up the
necessary locks and call them.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Cc: stable@vger.kernel.org Fixes: 724244cdb382 ("cifs: protect session channel fields with chan_lock") Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
William reports kernel soft-lockups on some OVS topologies when TC mirred
egress->ingress action is hit by local TCP traffic [1].
The same can also be reproduced with SCTP (thanks Xin for verifying), when
client and server reach themselves through mirred egress to ingress, and
one of the two peers sends a "heartbeat" packet (from within a timer).
Enqueueing to backlog proved to fix this soft lockup; however, as Cong
noticed [2], we should preserve - when possible - the current mirred
behavior that counts as "overlimits" any eventual packet drop subsequent to
the mirred forwarding action [3]. A compromise solution might use the
backlog only when tcf_mirred_act() has a nest level greater than one:
change tcf_mirred_forward() accordingly.
Also, add a kselftest that can reproduce the lockup and verifies TC mirred
ability to account for further packet drops after TC mirred egress->ingress
(when the nest level is 1).
[1] https://lore.kernel.org/netdev/33dc43f587ec1388ba456b4915c75f02a8aae226.1663945716.git.dcaratti@redhat.com/
[2] https://lore.kernel.org/netdev/Y0w%2FWWY60gqrtGLp@pop-os.localdomain/
[3] such behavior is not guaranteed: for example, if RPS or skb RX
timestamping is enabled on the mirred target device, the kernel
can defer receiving the skb and return NET_RX_SUCCESS inside
tcf_mirred_forward().
Reported-by: William Zhao <wizhao@redhat.com> CC: Xin Long <lucien.xin@gmail.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
with commit e2ca070f89ec ("net: sched: protect against stack overflow in
TC act_mirred"), act_mirred protected itself against excessive stack growth
using per_cpu counter of nested calls to tcf_mirred_act(), and capping it
to MIRRED_RECURSION_LIMIT. However, such protection does not detect
recursion/loops in case the packet is enqueued to the backlog (for example,
when the mirred target device has RPS or skb timestamping enabled). Change
the wording from "recursion" to "nesting" to make it more clear to readers.
CC: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: ca22da2fbd69 ("act_mirred: use the backlog for nested calls to mirred ingress") Signed-off-by: Sasha Levin <sashal@kernel.org>
The same strapping initialization issue that happened on NBIO 7.5.1
appears to be happening on NBIO 7.3.0.
Apply the same fix to 7.3.0 as well.
Note: This workaround relies upon the integrated GPU being enabled
in BIOS. If the integrated GPU is disabled in BIOS a different
workaround will be required.
Reported-by: Thomas Glanzmann <thomas@glanzmann.de> Cc: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Link: https://lore.kernel.org/linux-usb/Y%2Fz9GdHjPyF2rNG3@glanzmann.de/T/#u Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We fetch %SR value from sigframe; it might have been modified by signal
handler, so we can't trust it with any bits that are not modifiable in
user mode.
[Why]
Currently, the clk manager matches SocVoltage with voltage from
fused settings (dfPstate clock table). And then corresponding clocks
are selected.
However in certain situations, this leads to clk manager not
including at least one entry with highest supported clock setting.
[How]
Update the clk manager to include at least one entry with highest
supported clock setting.
Add the INT347E GPIO lookup table to the board data for the Surface
Go 3. This is necessary to allow the ov7251 IR camera to probe
properly on that platform.
Hyper-V uses a VHD or VHDX file on the host as the underlying storage for a
virtual disk. The VHD/VHDX file format is a sparse format where real disk
space on the host is assigned in chunks that the VHD/VHDX file format calls
the BlockSize. This BlockSize is not to be confused with the 512-byte (or
4096-byte) sector size of the underlying storage device. The default block
size for a new VHD/VHDX file is 32 Mbytes. When a guest VM touches any
disk space within a 32 Mbyte chunk of the VHD/VHDX file, Hyper-V allocates
32 Mbytes of real disk space for that section of the VHD/VHDX. Similarly,
if a discard operation is done that covers an entire 32 Mbyte chunk,
Hyper-V will free the real disk space for that portion of the VHD/VHDX.
This BlockSize is surfaced in Linux as the "discard_granularity" in
/sys/block/sd<x>/queue, which makes sense.
Hyper-V also has differencing disks that can overlay a VHD/VHDX file to
capture changes to the VHD/VHDX while preserving the original VHD/VHDX.
One example of this differencing functionality is for VM snapshots. When a
snapshot is created, a differencing disk is created. If the snapshot is
rolled back, Hyper-V can just delete the differencing disk, and the VM will
see the original disk contents at the time the snapshot was taken.
Differencing disks are used in other scenarios as well.
The BlockSize for a differencing disk defaults to 2 Mbytes, not 32 Mbytes.
The smaller default is used because changes to differencing disks are
typically scattered all over, and Hyper-V doesn't want to allocate 32
Mbytes of real disk space for a stray write here or there. The smaller
BlockSize provides more efficient use of real disk space.
When a differencing disk is added to a VHD/VHDX, Hyper-V reports
UNIT_ATTENTION with a sense code indicating "Operating parameters have
changed", because the value of discard_granularity should be changed to 2
Mbytes. When the differencing disk is removed, discard_granularity should
be changed back to 32 Mbytes. However, current code simply reports a
message from scsi_report_sense() and the value of
/sys/block/sd<x>/queue/discard_granularity is not updated. The message
isn't very actionable by a sysadmin.
Fix this by having the storvsc driver check for the sense code indicating
that the underly VHD/VHDX block size has changed, and do a rescan of the
device to pick up the new discard_granularity. With this change the entire
transition to/from differencing disks is handled automatically and
transparently, with no confusing messages being output.
When the SAS Transport Layer support is enabled and a device exposed to
the OS by the driver fails INQUIRY commands, the driver frees up the memory
allocated for an internal HBA port data structure. However, in some places,
the reference to the freed memory is not cleared. When the firmware sends
the Device Info change event for the same device again, the freed memory is
accessed and that leads to memory corruption and OS crash.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20230228140835.4075-7-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
A wrong variable is checked while populating PRP entries in the PRP page
and this results in failure. No PRP entries in the PRP page were
successfully created and any NVMe Encapsulated commands with PRP of size
greater than 8K failed.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20230228140835.4075-6-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If a controller reset operation is triggered to recover the controller from
a fault state, then wait for the snapdump to be saved in the firmware
region before proceeding to reset the controller.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20230228140835.4075-4-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the &epd_pool->list is empty when executing
lpfc_get_io_buf_from_expedite_pool() the function would return an invalid
pointer. Even in the case if the list is guaranteed to be populated, the
iterator variable should not be used after the loop to be more robust for
future changes.
Linus proposed to avoid any use of the list iterator variable after the
loop, in the attempt to move the list iterator variable declaration into
the macro to avoid any potential misuse after the loop [1].
The ufshcd driver uses simpleondemand governor for devfreq. Add it to the
list of ufshcd softdeps to allow userspace initramfs tools like dracut to
automatically pull the governor module into the initramfs together with UFS
drivers.
Commit 44c57f205876 ("scsi: qla2xxx: Changes to support FCP2 Target") added
support for FC2 Targets. Unfortunately, there are older setups which break
with this new feature enabled.
Allow to disable it via module option.
Link: https://lore.kernel.org/r/20230208152014.109214-1-dwagner@suse.de Signed-off-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The first half of the error message is printed by pr_err(), the second half
is printed by pr_debug(). The user will therefore see only the first part
of the message and will miss some useful information.
Link: https://lore.kernel.org/r/20230214141556.762047-1-mlombard@redhat.com Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add a regression test that ensures that a VAR pointing at a
modifier which follows a PTR (or STRUCT or ARRAY) is resolved
correctly by the datasec validator.
__get_kernel_nofault() does copy data in supervisor mode when
forcing a task backtrace log through /proc/sysrq_trigger.
This is expected cause a bus error exception on e.g. NULL
pointer dereferencing when logging a kernel task has no
workqueue associated. This bus error ought to be ignored.
Our 030 bus error handler is ill equipped to deal with this:
Whenever ssw indicates a kernel mode access on a data fault,
we don't even attempt to handle the fault and instead always
send a SEGV signal (or panic). As a result, the check
for exception handling at the fault PC (buried in
send_sig_fault() which gets called from do_page_fault()
eventually) is never used.
In contrast, both 040 and 060 access error handlers do not
care whether a fault happened on supervisor mode access,
and will call do_page_fault() on those, ultimately honoring
the exception table.
Add a check in bus_error030 to call do_page_fault() in case
we do have an entry for the fault PC in our exception table.
I had attempted a fix for this earlier in 2019 that did rely
on testing pagefault_disabled() (see link below) to achieve
the same thing, but this patch should be more generic.
The calculation of end addresses of memory chunks overflowed to 0 when
a memory chunk is located at the end of 32-bit address space.
This is the case for the HP300 architecture.
When a reset notify IPC message is received, the ISR schedules a work
function and passes the ISHTP device to it via a global pointer
ishtp_dev. If ish_probe() fails, the devm-managed device resources
including ishtp_dev are freed, but the work is not cancelled, causing a
use-after-free when the work function tries to access ishtp_dev. Use
devm_work_autocancel() instead, so that the work is automatically
cancelled if probe fails.
Signed-off-by: Reka Norman <rekanorman@chromium.org> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / linux-stable / log