It turns out that xtensa has a really odd configuration situation: you
can do a no-MMU config, but still have the page fault code enabled.
Which doesn't sound all that sensible, but it turns out that xtensa can
have protection faults even without the MMU, and we have this:
config PFAULT
bool "Handle protection faults" if EXPERT && !MMU
default y
help
Handle protection faults. MMU configurations must enable it.
noMMU configurations may disable it if used memory map never
generates protection faults or faults are always fatal.
If unsure, say Y.
which completely violated my expectations of the page fault handling.
End result: Guenter reports that the xtensa no-MMU builds all fail with
arch/xtensa/mm/fault.c: In function ‘do_page_fault’:
arch/xtensa/mm/fault.c:133:8: error: implicit declaration of function ‘lock_mm_and_find_vma’
because I never exposed the new lock_mm_and_find_vma() function for the
no-MMU case.
As already mentioned in my merge message for the 'expand-stack' branch,
we have something like 24 different versions of the page fault path for
all our different architectures, all just _slightly_ different due to
various historical reasons (usually related to exactly when they
branched off the original i386 version, and the details of the other
architectures they had in their history).
And a few of them had some silly mistake in the conversion.
Most of the architectures call the faulting address 'address' in the
fault path. But not all. Some just call it 'addr'. And if you end up
doing a bit too much copy-and-paste, you end up with the wrong version
in the places that do it differently.
In commit 8d7071af8907 ("mm: always expand the stack with the mmap write
lock held") I tried to deal with the remaining odd page fault handling
cases. The oddest one is ia64, which has stacks that grow both up and
down. And because ia64 was _so_ odd, I asked people to verify the end
result.
But a close second oddity is parisc, which is the only one that has a
main stack growing up (our "CONFIG_STACK_GROWSUP" config option). But
it looked obvious enough that I didn't worry about it.
I should have worried a bit more. Not because it was particularly
complex, but because I just used the wrong variable name.
The previous vma isn't called "prev", it's called "prev_vma". Blush.
Fixes: 8d7071af8907 ("mm: always expand the stack with the mmap write lock held") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sparc32 conversion to lock_mm_and_find_vma() in commit a050ba1e7422
("mm/fault: convert remaining simple cases to lock_mm_and_find_vma()")
missed the fact that we didn't actually have a 'regs' pointer available
in the 'force_user_fault()' case.
It's there in the regular page fault path ("do_sparc_fault()"), but not
the window underflow/overflow paths.
Which is all fine - we can just pass in a NULL pointer. The register
state is only used to avoid deadlock with kernel faults, which is not
the case for any of these register window faults.
That change was causing a regression in the generic-adc-thermal-probed
bootrr test as reported in the kernelci-results list [1].
A proper rework will take longer, so revert it for now.
Fixes: f05c7b7d9ea9 ("thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe") Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230525121811.3360268-1-ricardo.canuelo@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 498ba2069035 ("HID: logitech-hidpp: Don't restart communication if
not necessary") put restarting communication behind that flag, and this
was apparently necessary on the T651, but the flag was not set for it.
Fixes: 498ba2069035 ("HID: logitech-hidpp: Don't restart communication if not necessary") Cc: stable@vger.kernel.org Signed-off-by: Mike Hommey <mh@glandium.org> Link: https://lore.kernel.org/r/20230617230957.6mx73th4blv7owqk@glandium.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Code which interacts with timestamps needs to use the ktime_t type
returned by functions like ktime_get. The int type does not offer
enough space to store these values, and attempting to use it is a
recipe for problems. In this particular case, overflows would occur
when calculating/storing timestamps leading to incorrect values being
reported to userspace. In some cases these bad timestamps cause input
handling in userspace to appear hung.
The hidraw_open() function increments the hidraw device reference
counter. The counter has no dedicated synchronization mechanism,
resulting in a potential data race when concurrently opening a device.
The race is a regression introduced by commit 8590222e4b02 ("HID:
hidraw: Replace hidraw device table mutex with a rwsem"). While
minors_rwsem is intended to protect the hidraw_table itself, by instead
acquiring the lock for writing, the reference counter is also protected.
This is symmetrical to hidraw_release().
There is a potential OOB read at fast_imageblit, for
"colortab[(*src >> 4)]" can become a negative value due to
"const char *s = image->data, *src".
This change makes sure the index for colortab always positive
or zero.
Similar commit:
https://patchwork.kernel.org/patch/11746067
It feels very unlikely that anybody would want to do a GUP in an
unmapped area under the stack pointer, but real users sometimes do some
really strange things. So add a (temporary) warning for the case where
a GUP fails and expanding the stack might have made it work.
It's trivial to do the expansion in the caller as part of getting the mm
lock in the first place - see __access_remote_vm() for ptrace, for
example - it's just that it's unnecessarily painful to do it deep in the
guts of the GUP lookup when we might have to drop and re-take the lock.
I doubt anybody actually does anything quite this strange, but let's be
proactive: adding these warnings is simple, and will make debugging it
much easier if they trigger.
This finishes the job of always holding the mmap write lock when
extending the user stack vma, and removes the 'write_locked' argument
from the vm helper functions again.
For some cases, we just avoid expanding the stack at all: drivers and
page pinning really shouldn't be extending any stacks. Let's see if any
strange users really wanted that.
It's worth noting that architectures that weren't converted to the new
lock_mm_and_find_vma() helper function are left using the legacy
"expand_stack()" function, but it has been changed to drop the mmap_lock
and take it for writing while expanding the vma. This makes it fairly
straightforward to convert the remaining architectures.
As a result of dropping and re-taking the lock, the calling conventions
for this function have also changed, since the old vma may no longer be
valid. So it will now return the new vma if successful, and NULL - and
the lock dropped - if the area could not be extended.
Tested-by: Vegard Nossum <vegard.nossum@oracle.com> Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> # ia64 Tested-by: Frank Scheiner <frank.scheiner@web.de> # ia64 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a small step towards a model where GUP itself would not expand
the stack, and any user that needs GUP to not look up existing mappings,
but actually expand on them, would have to do so manually before-hand,
and with the mm lock held for writing.
It turns out that execve() already did almost exactly that, except it
didn't take the mm lock at all (it's single-threaded so no locking
technically needed, but it could cause lockdep errors). And it only did
it for the CONFIG_STACK_GROWSUP case, since in that case GUP has
obviously never expanded the stack downwards.
So just make that CONFIG_STACK_GROWSUP case do the right thing with
locking, and enable it generally. This will eventually help GUP, and in
the meantime avoids a special case and the lockdep issue.
Make calls to extend_vma() and find_extend_vma() fail if the write lock
is required.
To avoid making this a flag-day event, this still allows the old
read-locking case for the trivial situations, and passes in a flag to
say "is it write-locked". That way write-lockers can say "yes, I'm
being careful", and legacy users will continue to work in all the common
cases until they have been fully converted to the new world order.
Co-Developed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is one of the simple cases, except there's no pt_regs pointer.
Which is fine, as lock_mm_and_find_vma() is set up to work fine with a
NULL pt_regs.
Powerpc already enabled LOCK_MM_AND_FIND_VMA for the main CPU faulting,
so we can just use the helper without any extra work.
This does the simple pattern conversion of alpha, arc, csky, hexagon,
loongarch, nios2, sh, sparc32, and xtensa to the lock_mm_and_find_vma()
helper. They all have the regular fault handling pattern without odd
special cases.
The remaining architectures all have something that keeps us from a
straightforward conversion: ia64 and parisc have stacks that can grow
both up as well as down (and ia64 has special address region checks).
And m68k, microblaze, openrisc, sparc64, and um end up having extra
rules about only expanding the stack down a limited amount below the
user space stack pointer. That is something that x86 used to do too
(long long ago), and it probably could just be skipped, but it still
makes the conversion less than trivial.
Note that this conversion was done manually and with the exception of
alpha without any build testing, because I have a fairly limited cross-
building environment. The cases are all simple, and I went through the
changes several times, but...
arm has an additional check for address < FIRST_USER_ADDRESS before
expanding the stack. Since FIRST_USER_ADDRESS is defined everywhere
(generally as 0), move that check to the generic expand_downwards().
This converts arm64 to use the new page fault helper. It was very
straightforward, but still needed a fix for the "obvious" conversion I
initially did. Thanks to Suren for the fix and testing.
This is done as a separate patch from introducing the new
lock_mm_and_find_vma() helper, because while it's an obvious change,
it's not what x86 used to do in this area.
We already abort the page fault on fatal signals anyway, so why should
we wait for the mmap lock only to then abort later? With the new helper
function that returns without the lock held on failure anyway, this is
particularly easy and straightforward.
This basically extracts the existing x86 "find and expand faulting vma"
code, but extends it to also take the mmap lock for writing in case we
actually do need to expand the vma.
We've historically short-circuited that case, and have some rather ugly
special logic to serialize the stack segment expansion (since we only
hold the mmap lock for reading) that doesn't match the normal VM
locking.
That slight violation of locking worked well, right up until it didn't:
the maple tree code really does want proper locking even for simple
extension of an existing vma.
So extract the code for "look up the vma of the fault" from x86, fix it
up to do the necessary write locking, and make it available as a helper
function for other architectures that can use the common helper.
Note: I say "common helper", but it really only handles the normal
stack-grows-down case. Which is all architectures except for PA-RISC
and IA64. So some rare architectures can't use the helper, but if they
care they'll just need to open-code this logic.
It's also worth pointing out that this code really would like to have an
optimistic "mmap_upgrade_trylock()" to make it quicker to go from a
read-lock (for the common case) to taking the write lock (for having to
extend the vma) in the normal single-threaded situation where there is
no other locking activity.
But that _is_ all the very uncommon special case, so while it would be
nice to have such an operation, it probably doesn't matter in reality.
I did put in the skeleton code for such a possible future expansion,
even if it only acts as pseudo-documentation for what we're doing.
Check the write offset end bounds before using it as the offset into the
pivot array. This avoids a possible out-of-bounds access on the pivot
array if the write extends to the last slot in the node, in which case the
node maximum should be used as the end pivot.
akpm: this doesn't affect any current callers, but new users of mapletree
may encounter this problem if backported into earlier kernels, so let's
fix it in -stable kernels in case of this.
Link: https://lkml.kernel.org/r/20230506024752.2550-1-zhangpeng.00@bytedance.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With commit d674a8f123b4 ("can: isotp: isotp_sendmsg(): fix return
error on FC timeout on TX path") the missing correct return value in
the case of a protocol error was introduced.
But the way the error value has been read and sent to the user space
does not follow the common scheme to clear the error after reading
which is provided by the sock_error() function. This leads to an error
report at the following write() attempt although everything should be
working.
Fixes: d674a8f123b4 ("can: isotp: isotp_sendmsg(): fix return error on FC timeout on TX path") Reported-by: Carsten Schmidt <carsten.schmidt-achim@t-online.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230607072708.38809-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When kexec() is executed on a system with offline CPUs, which are parked in
mwait_play_dead() it can end up in a triple fault during the bootup of the
kexec kernel or cause hard to diagnose data corruption.
The reason is that kexec() eventually overwrites the previous kernel's text,
page tables, data and stack. If it writes to the cache line which is
monitored by a previously offlined CPU, MWAIT resumes execution and ends
up executing the wrong text, dereferencing overwritten page tables or
corrupting the kexec kernels data.
Cure this by bringing the offlined CPUs out of MWAIT into HLT.
Write to the monitored cache line of each offline CPU, which makes MWAIT
resume execution. The written control word tells the offlined CPUs to issue
HLT, which does not have the MWAIT problem.
That does not help, if a stray NMI, MCE or SMI hits the offlined CPUs as
those make it come out of HLT.
A follow up change will put them into INIT, which protects at least against
NMI and SMI.
Fixes: ea53069231f9 ("x86, hotplug: Use mwait to offline a processor, fix the legacy case") Reported-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230615193330.492257119@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Monitoring idletask::thread_info::flags in mwait_play_dead() has been an
obvious choice as all what is needed is a cache line which is not written
by other CPUs.
But there is a use case where a "dead" CPU needs to be brought out of
MWAIT: kexec().
This is required as kexec() can overwrite text, pagetables, stacks and the
monitored cacheline of the original kernel. The latter causes MWAIT to
resume execution which obviously causes havoc on the kexec kernel which
results usually in triple faults.
Use a dedicated per CPU storage to prepare for that.
stop_this_cpu() tests CPUID leaf 0x8000001f::EAX unconditionally. Intel
CPUs return the content of the highest supported leaf when a non-existing
leaf is read, while AMD CPUs return all zeros for unsupported leafs.
So the result of the test on Intel CPUs is lottery.
While harmless it's incorrect and causes the conditional wbinvd() to be
issued where not required.
Check whether the leaf is supported before reading it.
Tony reported intermittent lockups on poweroff. His analysis identified the
wbinvd() in stop_this_cpu() as the culprit. This was added to ensure that
on SME enabled machines a kexec() does not leave any stale data in the
caches when switching from encrypted to non-encrypted mode or vice versa.
That wbinvd() is conditional on the SME feature bit which is read directly
from CPUID. But that readout does not check whether the CPUID leaf is
available or not. If it's not available the CPU will return the value of
the highest supported leaf instead. Depending on the content the "SME" bit
might be set or not.
That's incorrect but harmless. Making the CPUID readout conditional makes
the observed hangs go away, but it does not fix the underlying problem:
CPU0 CPU1
stop_other_cpus()
send_IPIs(REBOOT); stop_this_cpu()
while (num_online_cpus() > 1); set_online(false);
proceed... -> hang
wbinvd()
WBINVD is an expensive operation and if multiple CPUs issue it at the same
time the resulting delays are even larger.
But CPU0 already observed num_online_cpus() going down to 1 and proceeds
which causes the system to hang.
This issue exists independent of WBINVD, but the delays caused by WBINVD
make it more prominent.
Make this more robust by adding a cpumask which is initialized to the
online CPU mask before sending the IPIs and CPUs clear their bit in
stop_this_cpu() after the WBINVD completed. Check for that cpumask to
become empty in stop_other_cpus() instead of watching num_online_cpus().
The cpumask cannot plug all holes either, but it's better than a raw
counter and allows to restrict the NMI fallback IPI to be sent only the
CPUs which have not reported within the timeout window.
If mas_store_gfp() in the gather loop failed, the 'error' variable that
ultimately gets returned was not being set. In many cases, its original
value of -ENOMEM was still in place, and that was fine. But if VMAs had
been split at the start or end of the range, then 'error' could be zero.
Change to the 'error = foo(); if (error) goto â\80¦' idiom to fix the bug.
Also clean up a later case which avoided the same bug by *explicitly*
setting error = -ENOMEM right before calling the function that might
return -ENOMEM.
In a final cosmetic change, move the 'Point of no return' comment to
*after* the goto. That's been in the wrong place since the preallocation
was removed, and this new error path was added.
Fixes: 606c812eb1d5 ("mm/mmap: Fix error path in do_vmi_align_munmap()") Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The error unrolling was leaving the VMAs detached in many cases and
leaving the locked_vm statistic altered, and skipping the unrolling
entirely in the case of the vma tree write failing.
Fix the error path by re-attaching the detached VMAs and adding the
necessary goto for the failed vma tree write, and fix the locked_vm
statistic by only updating after the vma tree write succeeds.
Fixes: 763ecb035029 ("mm: remove the vma linked list") Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[ dwmw2: Strictly, the original patch wasn't *re-attaching* the
detached VMAs. They *were* still attached but just had
the 'detached' flag set, which is an optimisation. Which
doesn't exist in 6.3, so drop that. Also drop the call
to vma_start_write() which came in with the per-VMA
locking in 6.4. ] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
last component point filename struct. Currently putname is called after
vfs_path_parent_lookup(). And then last component is used for
lookup_one_qstr_excl(). name in last component is freed by previous
calling putname(). And It cause file lookup failure when testing
generic/464 test of xfstest.
Fixes: 74d7970febf7 ("ksmbd: fix racy issue from using ->d_parent and ->d_name") Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a case that file_present is true and path is uninitialized.
This patch change file_present is set to false by default and set to
true when patch is initialized.
Fixes: 74d7970febf7 ("ksmbd: fix racy issue from using ->d_parent and ->d_name") Reported-by: Coverity Scan <scan-admin@coverity.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When reworking the vgic locking, the vgic distributor registration
got simplified, which was a very good cleanup. But just a tad too
radical, as we now register the *native* vgic only, ignoring the
GICv2-on-GICv3 that allows pre-historic VMs (or so I thought)
to run.
As it turns out, QEMU still defaults to GICv2 in some cases, and
this breaks Nathan's setup!
Fix it by propagating the *requested* vgic type rather than the
host's version.
Fixes b9703ed44ffb ("netfilter: nf_tables: support for adding new devices to an existing netdev chain") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Claim clkhi and clklo as integer type to avoid possible calculation
errors caused by data overflow.
Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver") Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Signed-off-by: Carlos Song <carlos.song@nxp.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When booting with "intremap=off" and "x2apic_phys" on the kernel command
line, the physical x2APIC driver ends up being used even when x2APIC
mode is disabled ("intremap=off" disables x2APIC mode). This happens
because the first compound condition check in x2apic_phys_probe() is
false due to x2apic_mode == 0 and so the following one returns true
after default_acpi_madt_oem_check() having already selected the physical
x2APIC driver.
Commits ffb1b4a41016 ("x86/unwind/orc: Add 'signal' field to ORC
metadata") and fb799447ae29 ("x86,objtool: Split UNWIND_HINT_EMPTY in
two") changed the ORC format. Although ORC is internal to the kernel,
it's the only way for external tools to get reliable kernel stack traces
on x86-64. In particular, the drgn debugger [1] uses ORC for stack
unwinding, and these format changes broke it [2]. As the drgn
maintainer, I don't care how often or how much the kernel changes the
ORC format as long as I have a way to detect the change.
It suffices to store a version identifier in the vmlinux and kernel
module ELF files (to use when parsing ORC sections from ELF), and in
kernel memory (to use when parsing ORC from a core dump+symbol table).
Rather than hard-coding a version number that needs to be manually
bumped, Peterz suggested hashing the definitions from orc_types.h. If
there is a format change that isn't caught by this, the hashing script
can be updated.
This patch adds an .orc_header allocated ELF section containing the
20-byte hash to vmlinux and kernel modules, along with the corresponding
__start_orc_header and __stop_orc_header symbols in vmlinux.
Fix possible virtqueue used buffers leak and corresponding stuck
in case of temporary -EIO from sendmsg() which is produced by
tun driver while backend device is not up.
In case of no-retriable error and zcopy do not revert upend_idx
to pass packet data (that is update used_idx in corresponding
vhost_zerocopy_signal_used()) as if packet data has been
transferred successfully.
v2: set vq->heads[ubuf->desc].len equal to VHOST_DMA_DONE_LEN
in case of fake successful transmit.
Signed-off-by: Andrey Smetanin <asmetanin@yandex-team.ru>
Message-Id: <20230424204411.24888-1-asmetanin@yandex-team.ru> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Andrey Smetanin <asmetanin@yandex-team.ru> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As is done in the net, iscsi, and vsock vhost support, let the vdpa vqs
know about the features that have been negotiated. This allows vhost
to more safely make decisions based on the features, such as when using
PACKED vs split queues.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230424225031.18947-2-shannon.nelson@amd.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add cpu_relax() for arm64 instead of directly assert(), and add assert.h
header file. Also, add smp_wmb and smp_mb for arm64.
Compilation error as follows, avoid __always_inline undefined.
$ make
cc -Wall -pthread -O2 -ggdb -flto -fwhole-program -c -o ring.o ring.c
In file included from ring.c:10:
main.h: In function ‘busy_wait’:
main.h:99:21: warning: implicit declaration of function ‘assert’
[-Wimplicit-function-declaration]
99 | #define cpu_relax() assert(0)
| ^~~~~~
main.h:107:17: note: in expansion of macro ‘cpu_relax’
107 | cpu_relax();
| ^~~~~~~~~
main.h:12:1: note: ‘assert’ is defined in header ‘<assert.h>’; did you
forget to ‘#include <assert.h>’?
11 | #include <stdbool.h>
+++ |+#include <assert.h>
12 |
main.h: At top level:
main.h:143:23: error: expected ‘;’ before ‘void’
143 | static __always_inline
| ^
| ;
144 | void __read_once_size(const volatile void *p, void *res, int
size)
| ~~~~
main.h:158:23: error: expected ‘;’ before ‘void’
158 | static __always_inline void __write_once_size(volatile void *p,
void *res, int size)
| ^~~~~
| ;
make: *** [<builtin>: ring.o] Error 1
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Message-Id: <tencent_F53E159DD7925174445D830DA19FACF44B07@qq.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Userspace can race to free the gobj(robj converted from), robj should not
be accessed again after drm_gem_object_put, otherwith it will result in
use-after-free.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Min Li <lm0963hack@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If it is async, runqueue_node is freed in g2d_runqueue_worker on another
worker thread. So in extreme cases, if g2d_runqueue_worker runs first, and
then executes the following if statement, there will be use-after-free.
Signed-off-by: Min Li <lm0963hack@gmail.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix a wrong error return by dropping an error return.
When vidi driver is remvoed, if ctx->raw_edid isn't same as fake_edid_info
then only what we have to is to free ctx->raw_edid so that driver removing
can work correctly - it's not an error case.
Several device tree files get the polarity of the pendown-gpios
wrong: this signal is active low. Fix up all incorrect flags, so
that operating systems can rely on the flag being correctly set.
With IC_INTR_RX_FULL slave interrupt handler reads data in a loop until
RX FIFO is empty. When testing with the slave-eeprom, each transaction
has 2 bytes for address/index and 1 byte for value, the address byte
can be written as data byte due to dropping STOP condition.
In the test below, the master continuously writes to the slave, first 2
bytes are index, 3rd byte is value and follow by a STOP condition.
Upon receiving STOP condition slave eeprom would reset `idx_write_cnt` so
next 2 bytes can be treated as buffer index for upcoming transaction.
Supposedly the slave eeprom buffer would be written as
When CPU load is high the slave irq handler may not read fast enough,
the interrupt status can be seen as 0x204 with both DW_IC_INTR_STOP_DET
(0x200) and DW_IC_INTR_RX_FULL (0x4) bits. The slave device may see
the transactions below.
0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x1594 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x1594 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x1594 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x1794 : INTR_STAT=0x204
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x1790 : INTR_STAT=0x200
0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x1594 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x1594 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x1594 : INTR_STAT=0x4
After `D1` is received, read loop continues to read `00` which is the
first bype of next index. Since STOP condition is ignored by the loop,
eeprom buffer index increased to `D2` and `00` is written as value.
The fix is to use `FIRST_DATA_BYTE` (bit 11) in `IC_DATA_CMD` to split
the transactions. The first index byte in this case would have bit 11
set. Check this indication to inject I2C_SLAVE_WRITE_REQUESTED event
which will reset `idx_write_cnt` in slave eeprom.
Signed-off-by: David Zheng <david.zheng@intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
net/sched/sch_api.c:2305:1: sparse: warning: symbol 'tc_skip_wrapper' was not declared. Should it be static?
No functional change intended.
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com> Acked-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
There's an issue on SAI synchronous mode that TX/RX side can't get BCLK
from RX/TX it sync with if BYP bit is asserted. It's a workaround to
fix it that enable SION of IOMUX pad control and assert BCI.
For example if TX sync with RX which means both TX and RX are using clk
form RX and BYP=1. TX can get BCLK only if the following two conditions
are valid:
1. SION of RX BCLK IOMUX pad is set to 1
2. BCI of TX is set to 1
Avoid linker error for randomly generated config file that
has CONFIG_BRANCH_PROFILE_NONE enabled and make it similar
to riscv, x86 and also to commit 4bf3ec384edf ("s390: disable
branch profiling for vdso").
When a direct I/O write is performed, iomap_dio_rw() invalidates the
part of the page cache which the write is going to before carrying out
the write. In the odd case, the direct I/O write will be reading from
the same page it is writing to. gfs2 carries out writes with page
faults disabled, so it should have been obvious that this page
invalidation can cause iomap_dio_rw() to never make any progress.
Currently, gfs2 will end up in an endless retry loop in
gfs2_file_direct_write() instead, though.
Break this endless loop by limiting the number of retries and falling
back to buffered I/O after that.
Also simplify should_fault_in_pages() sightly and add a comment to make
the above case easier to understand.
Reported-by: Jan Kara <jack@suse.cz> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When int3472 is loaded before GPIO driver, acpi_get_and_request_gpiod()
failed but the returned gpio descriptor is not NULL, it will cause panic
in later gpiod_put(), so set the gpio_desc to NULL in register error
handling to avoid such crash.
Signed-off-by: Hao Yao <hao.yao@intel.com> Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Link: https://lore.kernel.org/r/20230524035135.90315-1-bingbu.cao@intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
regmap-sdw does not support multi register writes, so there is
no point in setting this flag. This also leads to incorrect
programming of WSA codecs with regmap_multi_reg_write() call.
This invalid configuration should have been rejected by regmap-sdw.
Currently, if the device is offline and all the channel paths are
either configured or varied offline, the associated subchannel gets
unregistered. Don't unregister the subchannel, instead unregister
offline device.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some devices have a wrong entry in their button array which points to
a GPIO which is required in another driver, so soc_button_array must
not claim it.
A specific example of this is the Lenovo Yoga Book X90F / X90L,
where the PNP0C40 home button entry points to a GPIO which is not
a home button and which is required by the lenovo-yogabook driver.
Add a DMI quirk table which can specify an ACPI GPIO resource index which
should be skipped; and add an entry for the Lenovo Yoga Book X90F / X90L
to this new DMI quirk table.
Upon keep alive completion, nvme_keep_alive_work is scheduled with the
same delay every time. If keep alive commands are completing slowly,
this may cause a keep alive timeout. The following trace illustrates the
issue, taking KATO = 8 and TBKAS off for simplicity:
1. t = 0: run nvme_keep_alive_work, send keep alive
2. t = ε: keep alive reaches controller, controller restarts its keep
alive timer
3. t = 4: host receives keep alive completion, schedules
nvme_keep_alive_work with delay 4
4. t = 8: run nvme_keep_alive_work, send keep alive
Here, a keep alive having RTT of 4 causes a delay of at least 8 - ε
between the controller receiving successive keep alives. With ε small,
the controller is likely to detect a keep alive timeout.
Fix this by calculating the RTT of the keep alive command, and adjusting
the scheduling delay of the next keep alive work accordingly.
Reported-by: Costa Sapuntzakis <costa@purestorage.com> Reported-by: Randy Jennings <randyj@purestorage.com> Signed-off-by: Uday Shankar <ushankar@purestorage.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a command completes, we set a flag which will skip sending a
keep alive at the next run of nvme_keep_alive_work when TBKAS is on.
However, if the command was submitted long ago, it's possible that
the controller may have also restarted its keep alive timer (as a
result of receiving the command) long ago. The following trace
demonstrates the issue, assuming TBKAS is on and KATO = 8 for
simplicity:
1. t = 0: submit I/O commands A, B, C, D, E
2. t = 0.5: commands A, B, C, D, E reach controller, restart its keep
alive timer
3. t = 1: A completes
4. t = 2: run nvme_keep_alive_work, see recent completion, do nothing
5. t = 3: B completes
6. t = 4: run nvme_keep_alive_work, see recent completion, do nothing
7. t = 5: C completes
8. t = 6: run nvme_keep_alive_work, see recent completion, do nothing
9. t = 7: D completes
10. t = 8: run nvme_keep_alive_work, see recent completion, do nothing
11. t = 9: E completes
At this point, 8.5 seconds have passed without restarting the
controller's keep alive timer, so the controller will detect a keep
alive timeout.
Fix this by checking the IO start time when deciding to defer sending a
keep alive command. Only set comp_seen if the command started after the
most recent run of nvme_keep_alive_work. With this change, the
completions of B, C, and D will not set comp_seen and the run of
nvme_keep_alive_work at t = 4 will send a keep alive.
Reported-by: Costa Sapuntzakis <costa@purestorage.com> Reported-by: Randy Jennings <randyj@purestorage.com> Signed-off-by: Uday Shankar <ushankar@purestorage.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
With TBKAS on, the completion of one command can defer sending a
keep alive for up to twice the delay between successive runs of
nvme_keep_alive_work. The current delay of KATO / 2 thus makes it
possible for one command to defer sending a keep alive for up to
KATO, which can result in the controller detecting a KATO. The following
trace demonstrates the issue, taking KATO = 8 for simplicity:
1. t = 0: run nvme_keep_alive_work, no keep-alive sent
2. t = ε: I/O completion seen, set comp_seen = true
3. t = 4: run nvme_keep_alive_work, see comp_seen == true,
skip sending keep-alive, set comp_seen = false
4. t = 8: run nvme_keep_alive_work, see comp_seen == false,
send a keep-alive command.
Here, there is a delay of 8 - ε between receiving a command completion
and sending the next command. With ε small, the controller is likely to
detect a keep alive timeout.
Fix this by running nvme_keep_alive_work with a delay of KATO / 4
whenever TBKAS is on. Going through the above trace now gives us a
worst-case delay of 4 - ε, which is in line with the recommendation of
sending a command every KATO / 2 in the NVMe specification.
Reported-by: Costa Sapuntzakis <costa@purestorage.com> Reported-by: Randy Jennings <randyj@purestorage.com> Signed-off-by: Uday Shankar <ushankar@purestorage.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the function nvme_passthru_end(), only the value of the command
opcode is checked, without checking the command type (IO command or
Admin command). When we send a Dataset Management command (The opcode
of the Dataset Management command is the same as the Set Feature
command), kernel thinks it is a set feature command, then sets the
controller's keep alive interval, and calls nvme_keep_alive_work().
Signed-off-by: min15.li <min15.li@samsung.com> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This fixes the following warning reported by gcc 10.2.1 under x86_64:
../fs/btrfs/tree-log.c: In function ‘btrfs_log_inode’:
../fs/btrfs/tree-log.c:6211:9: error: ‘last_range_start’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
6211 | ret = insert_dir_log_key(trans, log, path, key.objectid,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
6212 | first_dir_index, last_dir_index);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../fs/btrfs/tree-log.c:6161:6: note: ‘last_range_start’ was declared here
6161 | u64 last_range_start;
| ^~~~~~~~~~~~~~~~
This might be a false positive fixed in later compiler versions but we
want to have it fixed.
This patch fixes the error checking in nfcsim.c.
The DebugFS kernel API is developed in
a way that the caller can safely ignore the errors that
occur during the creation of DebugFS nodes.
Signed-off-by: Osama Muhammad <osmtendev@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a message was received the last_initiator is set to 0xff.
This will force the signal free time for the next transmit
to that for a new initiator. However, if a new transmit is
already in progress, then don't set last_initiator, since
that's the initiator of the current transmit. Overwriting
this would cause the signal free time of a following transmit
to be that of the new initiator instead of a next transmit.
Explicitly disable the CEC adapter in cec_devnode_unregister()
Usually this does not really do anything important, but for drivers
that use the CEC pin framework this is needed to properly stop the
hrtimer. Without this a crash would happen when such a driver is
unloaded with rmmod.
If plen is null when passed in, we only checked for null
in one of the two places where it could be used. Although
plen is always valid (not null) for current callers of the
SMB2_change_notify function, this change makes it more consistent.
Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/all/202305251831.3V1gbbFs-lkp@intel.com/ Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The tpg->np_login_sem is a semaphore that is used to serialize the login
process when multiple login threads run concurrently against the same
target portal group.
The iscsi_target_locate_portal() function finds the tpg, calls
iscsit_access_np() against the np_login_sem semaphore and saves the tpg
pointer in conn->tpg;
If iscsi_target_locate_portal() fails, the caller will check for the
conn->tpg pointer and, if it's not NULL, then it will assume that
iscsi_target_locate_portal() called iscsit_access_np() on the semaphore.
Make sure that conn->tpg gets initialized only if iscsit_access_np() was
successful, otherwise iscsit_deaccess_np() may end up being called against
a semaphore we never took, allowing more than one thread to access the same
tpg.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Link: https://lore.kernel.org/r/20230508162219.1731964-4-mlombard@redhat.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the initiator suddenly stops sending data during a login while keeping
the TCP connection open, the login_work won't be scheduled and will never
release the login semaphore; concurrent login operations will therefore get
stuck and fail.
The bug is due to the inability of the login timeout code to properly
handle this particular case.
Fix the problem by replacing the old per-NP login timer with a new
per-connection timer.
The timer is started when an initiator connects to the target; if it
expires, it sends a SIGINT signal to the thread pointed at by the
conn->login_kworker pointer.
conn->login_kworker is set by calling the iscsit_set_login_timer_kworker()
helper, initially it will point to the np thread; When the login
operation's control is in the process of being passed from the NP-thread to
login_work, the conn->login_worker pointer is set to NULL. Finally,
login_kworker will be changed to point to the worker thread executing the
login_work job.
If conn->login_kworker is NULL when the timer expires, it means that the
login operation hasn't been completed yet but login_work isn't running, in
this case the timer will mark the login process as failed and will schedule
login_work so the latter will be forced to free the resources it holds.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Link: https://lore.kernel.org/r/20230508162219.1731964-2-mlombard@redhat.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Up until commit 6a45b0e2589f ("gpiolib: Introduce
gpiochip_irqchip_add_domain()") all irq_domains were allocated
by gpiolib itself and thus gpiolib also takes care of freeing it.
With gpiochip_irqchip_add_domain() a user of gpiolib can associate an
irq_domain with the gpio_chip. This irq_domain is not managed by
gpiolib and therefore must not be freed by gpiolib.
In case of gpio-regmap, IRQ chip is added by regmap-irq and associated with
GPIO chip by gpiochip_irqchip_add_domain(). The initialization flag was not
added in gpiochip_irqchip_add_domain(), causing gpiochip_to_irq() to return
-EPROBE_DEFER.
Fixes: 5467801f1fcb ("gpio: Restrict usage of GPIO chip irq members before initialization") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In pre-production prototypes (of which I only know one person
having one, Peter Geis), GPIO0 pin A5 was tied to the SDMMC
power enable pin on the CM4 connector. On all production models,
this is not the case; instead, this pin is used for the nEXTRST
signal, and the SDMMC power enable pin is always pulled high.
Since everyone currently using the SOQuartz device trees will
want this change, it is made to the tree without splitting the
trees into two separate ones of which users will then inevitably
choose the wrong one.
This fixes USB and PCIe on a wide variety of CM4IO-compatible
boards which use the nEXTRST signal.
This reverts commit 1f86123b9749 ("net: align SO_RCVMARK required
privileges with SO_MARK") because the reasoning in the commit message
is not really correct:
SO_RCVMARK is used for 'reading' incoming skb mark (via cmsg), as such
it is more equivalent to 'getsockopt(SO_MARK)' which has no priv check
and retrieves the socket mark, rather than 'setsockopt(SO_MARK) which
sets the socket mark and does require privs.
Additionally incoming skb->mark may already be visible if
sysctl_fwmark_reflect and/or sysctl_tcp_fwmark_accept are enabled.
Furthermore, it is easier to block the getsockopt via bpf
(either cgroup setsockopt hook, or via syscall filters)
then to unblock it if it requires CAP_NET_RAW/ADMIN.
On Android the socket mark is (among other things) used to store
the network identifier a socket is bound to. Setting it is privileged,
but retrieving it is not. We'd like unprivileged userspace to be able
to read the network id of incoming packets (where mark is set via
iptables [to be moved to bpf])...
An alternative would be to add another sysctl to control whether
setting SO_RCVMARK is privilged or not.
(or even a MASK of which bits in the mark can be exposed)
But this seems like over-engineering...
Note: This is a non-trivial revert, due to later merged commit e42c7beee71d
("bpf: net: Consider has_current_bpf_ctx() when testing capable() in sk_setsockopt()")
which changed both 'ns_capable' into 'sockopt_ns_capable' calls.
Fixes: 1f86123b9749 ("net: align SO_RCVMARK required privileges with SO_MARK") Cc: Larysa Zaremba <larysa.zaremba@intel.com> Cc: Simon Horman <simon.horman@corigine.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Eyal Birger <eyal.birger@gmail.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Patrick Rohr <prohr@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230618103130.51628-1-maze@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix this by moving the registration of source change notify handler only
when SPS(Static Slider) is advertised as supported.
Reported-by: Allen Zhong <allen@atr.me> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217571 Fixes: 4c71ae414474 ("platform/x86/amd/pmf: Add support SPS PMF feature") Tested-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20230622060309.310001-1-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When mirroring to a gretap in hardware the device expects to be
programmed with the egress port and all the encapsulating headers. This
requires the driver to resolve the path the packet will take in the
software data path and program the device accordingly.
If the path cannot be resolved (in this case because of an unresolved
neighbor), then mirror installation fails until the path is resolved.
This results in a race that causes the test to sometimes fail.
Fix this by setting the neighbor's state to permanent in a couple of
tests, so that it is always valid.
Fixes: 35c31d5c323f ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1d") Fixes: 239e754af854 ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q") Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/268816ac729cb6028c7a34d4dda6f4ec7af55333.1687264607.git.petrm@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Rather than assign the user pointer to msghdr->msg_control, assign it
to msghdr->msg_control_user to make sparse happy. They are in a union
so the end result is the same, but let's avoid new sparse warnings and
squash this one.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306210654.mDMcyMuB-lkp@intel.com/ Fixes: cac9e4418f4c ("io_uring/net: save msghdr->msg_control for retries") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
We currently allow to create perf link for program with
expected_attach_type == BPF_TRACE_KPROBE_MULTI.
This will cause crash when we call helpers like get_attach_cookie or
get_func_ip in such program, because it will call the kprobe_multi's
version (current->bpf_ctx context setup) of those helpers while it
expects perf_link's current->bpf_ctx context setup.
Making sure that we use BPF_TRACE_KPROBE_MULTI expected_attach_type
only for programs attaching through kprobe_multi link.
Fixes: ca74823c6e16 ("bpf: Add cookie support to programs attached with kprobe multi link") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230618131414.75649-1-jolsa@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
When building a kernel with LLVM=1, LLVM_IAS=0 and CONFIG_KASAN=y, LLVM
leaves DWARF tags for the "asan.module_ctor" & co symbols. In turn,
pahole creates BTF_KIND_FUNC entries for these and this makes the BTF
metadata validation fail because they contain a dot.
In a dramatic turn of event, this BTF verification failure can cause
the netfilter_bpf initialization to fail, causing netfilter_core to
free the netfilter_helper hashmap and netfilter_ftp to trigger a
use-after-free. The risk of u-a-f in netfilter will be addressed
separately but the existence of "asan.module_ctor" debug info under some
build conditions sounds like a good enough reason to accept functions
that contain dots in BTF.
Although using only LLVM=1 is the recommended way to compile clang-based
kernels, users can certainly do LLVM=1, LLVM_IAS=0 as well and we still
try to support that combination according to Nick. To clarify:
- > v5.10 kernel, LLVM=1 (LLVM_IAS=0 is not the default) is recommended,
but user can still have LLVM=1, LLVM_IAS=0 to trigger the issue
- <= 5.10 kernel, LLVM=1 (LLVM_IAS=0 is the default) is recommended in
which case GNU as will be used
Fixes: 1dc92851849c ("bpf: kernel side support for BTF Var and DataSec") Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Cc: Yonghong Song <yhs@meta.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/bpf/20230615145607.3469985-1-revest@chromium.org Signed-off-by: Sasha Levin <sashal@kernel.org>
This fixes a regression in which the link would come up, but no
communication was possible.
The reverted commit was also removing a comment about
DP83867_PHYCR_FORCE_LINK_GOOD, this is not added back in this commits
since it seems that this is unrelated to the original code change.
Closes: https://lore.kernel.org/all/ZGuDJos8D7N0J6Z2@francesco-nb.int.toradex.com/ Fixes: da9ef50f545f ("net: phy: dp83867: perform soft reset and retain established link") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Praneeth Bajjuri <praneeth@ti.com> Link: https://lore.kernel.org/r/20230619154435.355485-1-francesco@dolcini.it Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / linux-stable / log