Linus Torvalds [Sun, 3 Mar 2024 17:56:49 +0000 (09:56 -0800)]
Merge tag 'phy-fixes2-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- qcom: m31 pointer err fix, eusb2 fix redundant zero-out loop and v3
offset fix on qmp-usb
- freescale: fix for dphy alias
* tag 'phy-fixes2-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: qcom-qmp-usb: fix v3 offsets data
phy: qualcomm: eusb2-repeater: Rework init to drop redundant zero-out loop
phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR()
phy: freescale: phy-fsl-imx8-mipi-dphy: Fix alias name to use dashes
Linus Torvalds [Sun, 3 Mar 2024 17:54:03 +0000 (09:54 -0800)]
Merge tag 'dmaengine-fix2-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- dw-edma fixes to improve driver and remote HDMA setup
- fsl-edma fixes for SoC hange, irq init and byte calculations and
sparse fixes
- idxd: safe user copy of completion record fix
- ptdma: consistent DMA mask fix
* tag 'dmaengine-fix2-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: ptdma: use consistent DMA masks
dmaengine: fsl-qdma: add __iomem and struct in union to fix sparse warning
dmaengine: idxd: Ensure safe user copy of completion record
dmaengine: fsl-edma: correct max_segment_size setting
dmaengine: idxd: Remove shadow Event Log head stored in idxd
dmaengine: fsl-edma: correct calculation of 'nbytes' in multi-fifo scenario
dmaengine: fsl-qdma: init irq after reg initialization
dmaengine: fsl-qdma: fix SoC may hang on 16 byte unaligned read
dmaengine: dw-edma: eDMA: Add sync read before starting the DMA transfer in remote setup
dmaengine: dw-edma: HDMA: Add sync read before starting the DMA transfer in remote setup
dmaengine: dw-edma: Add HDMA remote interrupt configuration
dmaengine: dw-edma: HDMA_V0_REMOTEL_STOP_INT_EN typo fix
dmaengine: dw-edma: Fix wrong interrupt bit set for HDMA
dmaengine: dw-edma: Fix the ch_count hdma callback
Linus Torvalds [Sun, 3 Mar 2024 17:47:19 +0000 (09:47 -0800)]
Merge tag 'powerpc-6.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix IOMMU table initialisation when doing kdump over SR-IOV
- Fix incorrect RTAS function name for resetting TCE tables
- Fix fpu_signal selftest failures since a recent change
Thanks to Gaurav Batra and Nathan Lynch.
* tag 'powerpc-6.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix fpu_signal failures
powerpc/rtas: use correct function name for resetting TCE tables
powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV
Linus Torvalds [Sun, 3 Mar 2024 17:43:03 +0000 (09:43 -0800)]
Merge tag 'x86_urgent_for_v6.8_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Do not reserve SETUP_RNG_SEED setup data in the e820 map as it should
be used by kexec only
- Make sure MKTME feature detection happens at an earlier time in the
boot process so that the physical address size supported by the CPU
is properly corrected and MTRR masks are programmed properly, leading
to TDX systems booting without disable_mtrr_cleanup on the cmdline
- Make sure the different address sizes supported by the CPU are read
out as early as possible
* tag 'x86_urgent_for_v6.8_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/e820: Don't reserve SETUP_RNG_SEED in e820
x86/cpu/intel: Detect TME keyid bits before setting MTRR mask registers
x86/cpu: Allow reducing x86_phys_bits during early_identify_cpu()
Linus Torvalds [Sat, 2 Mar 2024 23:18:02 +0000 (15:18 -0800)]
Merge tag 'firewire-fixes-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"A workaround to suppress the continuous bus resets in the case that
older devices are connected to the modern 1394 OHCI hardware and
devices
In IEEE 1394 Amendment (IEEE 1394a-2000), the short bus reset is added
to resolve the shortcomings of the long bus reset in IEEE 1394-1995.
However, it is well-known that the solution is not necessarily
effective in the mixing environment that both IEEE 1394-1995 PHY and
IEEE 1394a-2000 (or later) PHY exist, as described in section 8.4.6.2
of IEEE 1394a-2000.
The current implementation of firewire stack schedules the short bus
reset when attempting to resolve the mismatch of gap count in the
certain generation of bus topology. It can cause the continuous bus
reset in the issued environment.
The workaround simply uses the long bus reset instead of the short bus
reset. It is desirable to detect whether the issued environment or
not. However, the way to access PHY registers from remote note is
firstly defined in IEEE 1394a-2000, thus it is not available in the
case"
* tag 'firewire-fixes-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: use long bus reset on gap count error
Linus Torvalds [Sat, 2 Mar 2024 17:38:03 +0000 (09:38 -0800)]
Merge tag 'xfs-6.8-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Chandan Babu:
"Drop experimental warning message when mounting an xfs filesystem on
an fsdax device. We now consider xfs on fsdax to be stable"
* tag 'xfs-6.8-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: drop experimental warning for FSDAX
Linus Torvalds [Sat, 2 Mar 2024 17:25:12 +0000 (09:25 -0800)]
Merge tag 'gpio-fixes-for-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix resource freeing ordering in error path when adding a GPIO chip
- only set pins to output after the reset is complete in gpio-74x164
* tag 'gpio-fixes-for-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: fix resource unwinding order in error path
gpiolib: Fix the error path order in gpiochip_add_data_with_key()
gpio: 74x164: Enable output pins after registers are reset
Ming Lei [Sun, 25 Feb 2024 03:01:41 +0000 (11:01 +0800)]
block: define bvec_iter as __packed __aligned(4)
In commit 19416123ab3e ("block: define 'struct bvec_iter' as packed"),
what we need is to save the 4byte padding, and avoid `bio` to spread on
one extra cache line.
It is enough to define it as '__packed __aligned(4)', as '__packed'
alone means byte aligned, and can cause compiler to generate horrible
code on architectures that don't support unaligned access in case that
bvec_iter is embedded in other structures.
Cc: Mikulas Patocka <mpatocka@redhat.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Fixes: 19416123ab3e ("block: define 'struct bvec_iter' as packed") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 2 Mar 2024 17:10:00 +0000 (09:10 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small fixes, all in drivers (the more obsolete mpt3sas and the
newer mpi3mr)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpt3sas: Prevent sending diag_reset when the controller is ready
scsi: mpi3mr: Reduce stack usage in mpi3mr_refresh_sas_ports()
Linus Torvalds [Sat, 2 Mar 2024 01:25:31 +0000 (17:25 -0800)]
Merge tag 'for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
- Kconfig dependency fix
- bq27xxx-i2c: do not free non-existing IRQ
* tag 'for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: bq27xxx-i2c: Do not free non existing IRQ
power: supply: mm8013: select REGMAP_I2C
Linus Torvalds [Sat, 2 Mar 2024 01:18:35 +0000 (17:18 -0800)]
Merge tag 'devicetree-fixes-for-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fix from Rob Herring:
"One fix for a bug in fw_devlink handling of OF graph. This doesn't
completely fix the reported problems, but it's with users adding out
of tree code"
* tag 'devicetree-fixes-for-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: property: fw_devlink: Fix stupid bug in remote-endpoint parsing
Saravana Kannan [Sat, 24 Feb 2024 05:24:35 +0000 (21:24 -0800)]
of: property: fw_devlink: Fix stupid bug in remote-endpoint parsing
Introduced a stupid bug in commit 782bfd03c3ae ("of: property: Improve
finding the supplier of a remote-endpoint property") due to a last minute
incorrect edit of "index !=0" into "!index". This patch fixes it to be
"index > 0" to match the comment right next to it.
Reported-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://lore.kernel.org/lkml/20240223171849.10f9901d@booty/ Fixes: 782bfd03c3ae ("of: property: Improve finding the supplier of a remote-endpoint property") Signed-off-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://lore.kernel.org/r/20240224052436.3552333-1-saravanak@google.com Signed-off-by: Rob Herring <robh@kernel.org>
Linus Torvalds [Fri, 1 Mar 2024 20:44:33 +0000 (12:44 -0800)]
Merge tag 'riscv-for-linus-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- detect ".option arch" support on not-yet-released LLVM builds
- fix missing TLB flush when modifying non-leaf PTEs
- fixes for T-Head custom extensions
- fix for systems with the legacy PMU, that manifests as a crash on
kernels built without SBI PMU support
- fix for systems that clear *envcfg on suspend, which manifests as
cbo.zero trapping after resume
- fixes for Svnapot systems, including removing Svnapot support for
huge vmalloc/vmap regions
* tag 'riscv-for-linus-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Sparse-Memory/vmemmap out-of-bounds fix
riscv: Fix pte_leaf_size() for NAPOT
Revert "riscv: mm: support Svnapot in huge vmap"
riscv: Save/restore envcfg CSR during CPU suspend
riscv: Add a custom ISA extension for the [ms]envcfg CSR
riscv: Fix enabling cbo.zero when running in M-mode
perf: RISCV: Fix panic on pmu overflow handler
MAINTAINERS: Update SiFive driver maintainers
drivers: perf: ctr_get_width function for legacy is not defined
drivers: perf: added capabilities for legacy PMU
RISC-V: Ignore V from the riscv,isa DT property on older T-Head CPUs
riscv: Fix build error if !CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION
riscv: mm: fix NOCACHE_THEAD does not set bit[61] correctly
riscv: add CALLER_ADDRx support
RISC-V: Drop invalid test from CONFIG_AS_HAS_OPTION_ARCH
kbuild: Add -Wa,--fatal-warnings to as-instr invocation
riscv: tlb: fix __p*d_free_tlb()
Linus Torvalds [Fri, 1 Mar 2024 20:34:23 +0000 (12:34 -0800)]
Merge tag 'ceph-for-6.8-rc7' of https://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"Catch up with mdsmap encoding rectification which ended up being
necessary after all to enable cluster upgrades from problematic
v18.2.0 and v18.2.1 releases"
* tag 'ceph-for-6.8-rc7' of https://github.com/ceph/ceph-client:
ceph: switch to corrected encoding of max_xattr_size in mdsmap
Linus Torvalds [Fri, 1 Mar 2024 20:29:20 +0000 (12:29 -0800)]
Merge tag 'for-6.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix freeing allocated id for anon dev when snapshot creation fails
- fiemap fixes:
- followup for a recent deadlock fix, ranges that fiemap can access
can still race with ordered extent completion
- make sure fiemap with SYNC flag does not race with writes
* tag 'for-6.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix double free of anonymous device after snapshot creation failure
btrfs: ensure fiemap doesn't race with writes when FIEMAP_FLAG_SYNC is given
btrfs: fix race between ordered extent completion and fiemap
Linus Torvalds [Fri, 1 Mar 2024 20:17:02 +0000 (12:17 -0800)]
Merge tag 'vfs-6.8-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"Two small fixes:
- Fix an endless loop during afs directory iteration caused by not
skipping silly-rename files correctly.
- Fix reporting of completion events for aio causing leaks in
userspace. This is based on the fix last week as it's now possible
to recognize aio events submitted through the old aio interface"
* tag 'vfs-6.8-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/aio: Make io_cancel() generate completions again
afs: Fix endless loop in directory parsing
Linus Torvalds [Fri, 1 Mar 2024 19:40:29 +0000 (11:40 -0800)]
Merge tag 'efi-fixes-for-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Only the EFI variable name size change is significant, and will be
backported once it lands. The others are cleanup.
- Fix phys_addr_t size confusion in 32-bit capsule loader
- Reduce maximum EFI variable name size to 512 to work around buggy
firmware
- Drop some redundant code from efivarfs while at it"
* tag 'efi-fixes-for-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efivarfs: Drop 'duplicates' bool parameter on efivar_init()
efivarfs: Drop redundant cleanup on fill_super() failure
efivarfs: Request at most 512 bytes for variable names
efi/capsule-loader: fix incorrect allocation size
Linus Torvalds [Fri, 1 Mar 2024 19:32:41 +0000 (11:32 -0800)]
Merge tag 'sound-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The amount of changes wasn't as small as wished, but all reasonably
small fixes. There is a PCM core API change, which is for correcting
the behavior change we took in 6.8. The rest are device-specific fixes
for ASoC AMD, Qualcomm, Cirrus codecs, HD-audio quirks & co"
* tag 'sound-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: amd: yc: Fix non-functional mic on Lenovo 21J2
ASoC: amd: yc: add new YC platform variant (0x63) support
ALSA: hda/realtek - ALC285 reduce pop noise from Headphone port
ASoC: amd: yc: Add Lenovo ThinkBook 21J0 into DMI quirk table
ALSA: hda/realtek: Add special fixup for Lenovo 14IRP8
ASoC: soc-card: Fix missing locking in snd_soc_card_get_kcontrol()
ALSA: hda/realtek: tas2781: enable subwoofer volume control
ALSA: pcm: clarify and fix default msbits value for all formats
ASoC: qcom: Fix uninitialized pointer dmactl
ALSA: hda/realtek: fix mute/micmute LED For HP mt440
ALSA: Drop leftover snd-rtctimer stuff from Makefile
ALSA: ump: Fix the discard error code from snd_ump_legacy_open()
ALSA: hda/realtek: Enable Mute LED on HP 840 G8 (MB 8AB8)
ASoC: cs35l56: Must clear HALO_STATE before issuing SYSTEM_RESET
ALSA: hda/realtek: Fix top speaker connection on Dell Inspiron 16 Plus 7630
ALSA: firewire-lib: fix to check cycle continuity
Linus Torvalds [Fri, 1 Mar 2024 19:23:08 +0000 (11:23 -0800)]
Merge tag 'drm-fixes-2024-03-01' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Bunch of fixes, xe, amdgpu, nouveau and tegra all have a few. Then
drm/bridge including some drivers/soc fallout fixes. The biggest thing
in here is a new unit test for some buddy allocator fixes, otherwise a
misc fbcon, ttm unit test and one msm revert.
Seems pretty normal for this stage.
buddy:
- two allocation fixes + unit test
fbcon:
- font restore syzkaller fix
ttm:
- kunit test fix
bridge:
- fix aux-hpd leaks
- fix aux-hpd registration
- fix use after free in soc/qcom
- fix boot on soc/qcom
xe:
- A couple of tracepoint updates from Priyanka and Lucas
- Make sure BINDs are completed before accepting UNBINDs on LR vms
- Don't arbitrarily restrict max number of batched binds
- Add uapi for dumpable bos (agreed on IRC)
- Remove unused uapi flags and a leftover comment
- A couple of fixes related to the execlist backend
msm:
- DP: Revert a change which was causing a HDP regression
amdgpu:
- Fix potential buffer overflow
- Fix power min cap
- Suspend/resume fix
- SI PM fix
- eDP fix
nouveau:
- fix a misreported VRAM sizing
- fix a regression in suspend/resume due to freeing
tegra:
- host1x reset fix
- only remove existing driver if display is possible"
* tag 'drm-fixes-2024-03-01' of https://gitlab.freedesktop.org/drm/kernel: (32 commits)
drm/nouveau: keep DMA buffers required for suspend/resume
nouveau: report byte usage in VRAM usage
drm/xe/xe_trace: Add move_lacks_source detail to xe_bo_move trace
drm/xe: Deny unbinds if uapi ufence pending
drm/xe: Expose user fence from xe_sync_entry
drm/xe: Use pointers in trace events
drm/xe/xe_bo_move: Enhance xe_bo_move trace
drm/xe/mmio: fix build warning for BAR resize on 32-bit
drm/xe: get rid of MAX_BINDS
drm/xe: Use vmalloc for array of bind allocation in bind IOCTL
drm/xe: Don't support execlists in xe_gt_tlb_invalidation layer
drm/xe: Fix execlist splat
drm/xe/uapi: Remove unused flags
drm/xe/uapi: Remove DRM_XE_VM_BIND_FLAG_ASYNC comment left over
drm/xe: Add uapi for dumpable bos
drm/amd/display: Add monitor patch for specific eDP
Revert "drm/msm/dp: use drm_bridge_hpd_notify() to report HPD status changes"
drm/tests/drm_buddy: add alloc_range_bias test
drm/buddy: check range allocation matches alignment
drm/buddy: fix range bias
...
Linus Torvalds [Fri, 1 Mar 2024 19:17:23 +0000 (11:17 -0800)]
Merge tag 'probes-fixes-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull fprobe fix from Masami Hiramatsu:
- allocate entry_data_size buffer for each rethook instance.
This fixes a buffer overrun bug (which leads a kernel crash)
when fprobe user uses its entry_data in the entry_handler.
* tag 'probes-fixes-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fprobe: Fix to allocate entry_data_size buffer with rethook instances
Tetsuo Handa [Fri, 1 Mar 2024 13:04:06 +0000 (22:04 +0900)]
tomoyo: fix UAF write bug in tomoyo_write_control()
Since tomoyo_write_control() updates head->write_buf when write()
of long lines is requested, we need to fetch head->write_buf after
head->io_sem is held. Otherwise, concurrent write() requests can
cause use-after-free-write and double-free problems.
Reported-by: Sam Sun <samsun1006219@gmail.com> Closes: https://lkml.kernel.org/r/CAEkJfYNDspuGxYx5kym8Lvp--D36CMDUErg4rxfWFJuPbbji8g@mail.gmail.com Fixes: bd03a3e4c9a9 ("TOMOYO: Add policy namespace support.") Cc: <stable@vger.kernel.org> # Linux 3.1+ Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jiri Bohac [Wed, 31 Jan 2024 00:04:28 +0000 (01:04 +0100)]
x86/e820: Don't reserve SETUP_RNG_SEED in e820
SETUP_RNG_SEED in setup_data is supplied by kexec and should
not be reserved in the e820 map.
Doing so reserves 16 bytes of RAM when booting with kexec.
(16 bytes because data->len is zeroed by parse_setup_data so only
sizeof(setup_data) is reserved.)
When kexec is used repeatedly, each boot adds two entries in the
kexec-provided e820 map as the 16-byte range splits a larger
range of usable memory. Eventually all of the 128 available entries
get used up. The next split will result in losing usable memory
as the new entries cannot be added to the e820 map.
Fixes: 68b8e9713c8e ("x86/setup: Use rng seeds from setup_data") Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/ZbmOjKnARGiaYBd5@dwarf.suse.cz
Zhangfei Gao [Tue, 27 Feb 2024 06:48:21 +0000 (06:48 +0000)]
iommu/sva: Fix SVA handle sharing in multi device case
iommu_sva_bind_device will directly goto out in multi-device
case when found existing domain, ignoring list_add handle,
which causes the handle to fail to be shared.
Fixes: 65d4418c5002 ("iommu/sva: Restore SVA handle sharing") Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20240227064821.128-1-zhangfei.gao@linaro.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
My recent commit e5d00aaac651 ("selftests/powerpc: Check all FPRs in
fpu_preempt") inadvertently broke the fpu_signal test.
It needs to take into account that fpu_preempt now loads 32 FPRs, so
enlarge darray.
Also use the newly added randomise_darray() to properly randomise darray.
Finally the checking done in signal_fpu_sig() needs to skip checking
f30/f31, because they are used as scratch registers in check_all_fprs(),
called by preempt_fpu(), and so could hold other values when the signal
is taken.
Fixes: e5d00aaac651 ("selftests/powerpc: Check all FPRs in fpu_preempt") Reported-by: Spoorthy <spoorthy@linux.ibm.com>
Depends-on: 2ba107f6795d ("selftests/powerpc: Generate better bit patterns for FPU tests") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240301101035.1230024-1-mpe@ellerman.id.au
Andy Shevchenko [Wed, 21 Feb 2024 19:28:46 +0000 (21:28 +0200)]
gpiolib: Fix the error path order in gpiochip_add_data_with_key()
After shuffling the code, error path wasn't updated correctly.
Fix it here.
Fixes: 2f4133bb5f14 ("gpiolib: No need to call gpiochip_remove_pin_ranges() twice") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
gpio: 74x164: Enable output pins after registers are reset
Chip outputs are enabled[1] before actual reset is performed[2] which might
cause pin output value to flip flop if previous pin value was set to 1.
Fix that behavior by making sure chip is fully reset before all outputs are
enabled.
Flip-flop can be noticed when module is removed and inserted again and one of
the pins was changed to 1 before removal. 100 microsecond flipping is
noticeable on oscilloscope (100khz SPI bus).
For a properly reset chip - output is enabled around 100 microseconds (on 100khz
SPI bus) later during probing process hence should be irrelevant behavioral
change.
Sid Pranjale [Thu, 29 Feb 2024 16:22:05 +0000 (21:52 +0530)]
drm/nouveau: keep DMA buffers required for suspend/resume
Nouveau deallocates a few buffers post GPU init which are required for GPU suspend/resume to function correctly.
This is likely not as big an issue on systems where the NVGPU is the only GPU, but on multi-GPU set ups it leads to a regression where the kernel module errors and results in a system-wide rendering freeze.
This commit addresses that regression by moving the two buffers required for suspend and resume to be deallocated at driver unload instead of post init.
Fixes: 042b5f83841fb ("drm/nouveau: fix several DMA buffer leaks") Signed-off-by: Sid Pranjale <sidpranjale127@protonmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 1 Mar 2024 03:42:24 +0000 (13:42 +1000)]
Merge tag 'drm-xe-fixes-2024-02-29' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- A couple of tracepoint updates from Priyanka and Lucas.
- Make sure BINDs are completed before accepting UNBINDs on LR vms.
- Don't arbitrarily restrict max number of batched binds.
- Add uapi for dumpable bos (agreed on IRC).
- Remove unused uapi flags and a leftover comment.
Driver Changes:
- A couple of fixes related to the execlist backend.
Dave Airlie [Fri, 1 Mar 2024 03:12:32 +0000 (13:12 +1000)]
Merge tag 'drm-misc-fixes-2024-02-29' of https://anongit.freedesktop.org/git/drm/drm-misc into drm-fixes
A reset fix for host1x, a resource leak fix and a probe fix for aux-hpd,
a use-after-free fix and a boot fix for a pmic_glink qcom driver in
drivers/soc, a fix for the simpledrm/tegra transition, a kunit fix for
the TTM tests, a font handling fix for fbcon, two allocation fixes and a
kunit test to cover them for drm/buddy
fprobe: Fix to allocate entry_data_size buffer with rethook instances
Fix to allocate fprobe::entry_data_size buffer with rethook instances.
If fprobe doesn't allocate entry_data_size buffer for each rethook instance,
fprobe entry handler can cause a buffer overrun when storing entry data in
entry handler.
Filipe Manana [Fri, 23 Feb 2024 16:38:43 +0000 (16:38 +0000)]
btrfs: fix double free of anonymous device after snapshot creation failure
When creating a snapshot we may do a double free of an anonymous device
in case there's an error committing the transaction. The second free may
result in freeing an anonymous device number that was allocated by some
other subsystem in the kernel or another btrfs filesystem.
The steps that lead to this:
1) At ioctl.c:create_snapshot() we allocate an anonymous device number
and assign it to pending_snapshot->anon_dev;
2) Then we call btrfs_commit_transaction() and end up at
transaction.c:create_pending_snapshot();
3) There we call btrfs_get_new_fs_root() and pass it the anonymous device
number stored in pending_snapshot->anon_dev;
4) btrfs_get_new_fs_root() frees that anonymous device number because
btrfs_lookup_fs_root() returned a root - someone else did a lookup
of the new root already, which could some task doing backref walking;
5) After that some error happens in the transaction commit path, and at
ioctl.c:create_snapshot() we jump to the 'fail' label, and after
that we free again the same anonymous device number, which in the
meanwhile may have been reallocated somewhere else, because
pending_snapshot->anon_dev still has the same value as in step 1.
Recently syzbot ran into this and reported the following trace:
Where we get an explicit message where we attempt to free an anonymous
device number that is not currently allocated. It happens in a different
code path from the example below, at btrfs_get_root_ref(), so this change
may not fix the case triggered by syzbot.
To fix at least the code path from the example above, change
btrfs_get_root_ref() and its callers to receive a dev_t pointer argument
for the anonymous device number, so that in case it frees the number, it
also resets it to 0, so that up in the call chain we don't attempt to do
the double free.
CC: stable@vger.kernel.org # 5.10+ Link: https://lore.kernel.org/linux-btrfs/000000000000f673a1061202f630@google.com/ Fixes: e03ee2fe873e ("btrfs: do not ASSERT() if the newly created subvolume already got read") Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 22 Feb 2024 12:29:34 +0000 (12:29 +0000)]
btrfs: ensure fiemap doesn't race with writes when FIEMAP_FLAG_SYNC is given
When FIEMAP_FLAG_SYNC is given to fiemap the expectation is that that
are no concurrent writes and we get a stable view of the inode's extent
layout.
When the flag is given we flush all IO (and wait for ordered extents to
complete) and then lock the inode in shared mode, however that leaves open
the possibility that a write might happen right after the flushing and
before locking the inode. So fix this by flushing again after locking the
inode - we leave the initial flushing before locking the inode to avoid
holding the lock and blocking other RO operations while waiting for IO
and ordered extents to complete. The second flushing while holding the
inode's lock will most of the time do nothing or very little since the
time window for new writes to have happened is small.
Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 22 Feb 2024 12:29:26 +0000 (12:29 +0000)]
btrfs: fix race between ordered extent completion and fiemap
For fiemap we recently stopped locking the target extent range for the
whole duration of the fiemap call, in order to avoid a deadlock in a
scenario where the fiemap buffer happens to be a memory mapped range of
the same file. This use case is very unlikely to be useful in practice but
it may be triggered by fuzz testing (syzbot, etc).
However by not locking the target extent range for the whole duration of
the fiemap call we can race with an ordered extent. This happens like
this:
1) The fiemap task finishes processing a file extent item that covers
the file range [512K, 1M[, and that file extent item is the last item
in the leaf currently being processed;
2) And ordered extent for the file range [768K, 2M[, in COW mode,
completes (btrfs_finish_one_ordered()) and the file extent item
covering the range [512K, 1M[ is trimmed to cover the range
[512K, 768K[ and then a new file extent item for the range [768K, 2M[
is inserted in the inode's subvolume tree;
3) The fiemap task calls fiemap_next_leaf_item(), which then calls
btrfs_next_leaf() to find the next leaf / item. This finds that the
the next key following the one we previously processed (its type is
BTRFS_EXTENT_DATA_KEY and its offset is 512K), is the key corresponding
to the new file extent item inserted by the ordered extent, which has
a type of BTRFS_EXTENT_DATA_KEY and an offset of 768K;
4) Later the fiemap code ends up at emit_fiemap_extent() and triggers
the warning:
Since we get 1M > 768K, because the previously emitted entry for the
old extent covering the file range [512K, 1M[ ends at an offset that
is greater than the new extent's start offset (768K). This makes fiemap
fail with -EINVAL besides triggering the warning that produces a stack
trace like the following:
There's also another case where before calling btrfs_next_leaf() we are
processing a hole or a prealloc extent and we had several delalloc ranges
within that hole or prealloc extent. In that case if the ordered extents
complete before we find the next key, we may end up finding an extent item
with an offset smaller than (or equals to) the offset in cache->offset.
So fix this by changing emit_fiemap_extent() to address these three
scenarios like this:
1) For the first case, steps listed above, adjust the length of the
previously cached extent so that it does not overlap with the current
extent, emit the previous one and cache the current file extent item;
2) For the second case where he had a hole or prealloc extent with
multiple delalloc ranges inside the hole or prealloc extent's range,
and the current file extent item has an offset that matches the offset
in the fiemap cache, just discard what we have in the fiemap cache and
assign the current file extent item to the cache, since it's more up
to date;
3) For the third case where he had a hole or prealloc extent with
multiple delalloc ranges inside the hole or prealloc extent's range
and the offset of the file extent item we just found is smaller than
what we have in the cache, just skip the current file extent item
if its range end at or behind the cached extent's end, because we may
have emitted (to the fiemap user space buffer) delalloc ranges that
overlap with the current file extent item's range. If the file extent
item's range goes beyond the end offset of the cached extent, just
emit the cached extent and cache a subrange of the file extent item,
that goes from the end offset of the cached extent to the end offset
of the file extent item.
Dealing with those cases in those ways makes everything consistent by
reflecting the current state of file extent items in the btree and
without emitting extents that have overlapping ranges (which would be
confusing and violating expectations).
This issue could be triggered often with test case generic/561, and was
also hit and reported by Wang Yugui.
Reported-by: Wang Yugui <wangyugui@e16-tech.com> Link: https://lore.kernel.org/linux-btrfs/20240223104619.701F.409509F4@e16-tech.com/ Fixes: b0ad381fa769 ("btrfs: fix deadlock with fiemap and extent locking") Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Linus Torvalds [Thu, 29 Feb 2024 20:40:20 +0000 (12:40 -0800)]
Merge tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, WiFi and netfilter.
We have one outstanding issue with the stmmac driver, which may be a
LOCKDEP false positive, not a blocker.
Current release - regressions:
- netfilter: nf_tables: re-allow NFPROTO_INET in
nft_(match/target)_validate()
- eth: ionic: fix error handling in PCI reset code
Current release - new code bugs:
- eth: stmmac: complete meta data only when enabled, fix null-deref
- kunit: fix again checksum tests on big endian CPUs
Previous releases - regressions:
- veth: try harder when allocating queue memory
- Bluetooth:
- hci_bcm4377: do not mark valid bd_addr as invalid
- hci_event: fix handling of HCI_EV_IO_CAPA_REQUEST
Previous releases - always broken:
- info leak in __skb_datagram_iter() on netlink socket
- mptcp:
- map v4 address to v6 when destroying subflow
- fix potential wake-up event loss due to sndbuf auto-tuning
- fix double-free on socket dismantle
- wifi: nl80211: reject iftype change with mesh ID change
- fix small out-of-bound read when validating netlink be16/32 types
- rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
- ipv6: fix potential "struct net" ref-leak in inet6_rtm_getaddr()
- ip_tunnel: prevent perpetual headroom growth with huge number of
tunnels on top of each other
- mctp: fix skb leaks on error paths of mctp_local_output()
- eth: ice: fixes for DPLL state reporting
- dpll: rely on rcu for netdev_dpll_pin() to prevent UaF
- eth: dpaa: accept phy-interface-type = '10gbase-r' in the device
tree"
* tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
dpll: fix build failure due to rcu_dereference_check() on unknown type
kunit: Fix again checksum tests on big endian CPUs
tls: fix use-after-free on failed backlog decryption
tls: separate no-async decryption request handling from async
tls: fix peeking with sync+async decryption
tls: decrement decrypt_pending if no async completion will be called
gtp: fix use-after-free and null-ptr-deref in gtp_newlink()
net: hsr: Use correct offset for HSR TLV values in supervisory HSR frames
igb: extend PTP timestamp adjustments to i211
rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
tools: ynl: fix handling of multiple mcast groups
selftests: netfilter: add bridge conntrack + multicast test case
netfilter: bridge: confirm multicast packets before passing them up the stack
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
Bluetooth: qca: Fix triggering coredump implementation
Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
Bluetooth: qca: Fix wrong event type for patch config command
Bluetooth: Enforce validation on max value of connection interval
Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
Bluetooth: mgmt: Fix limited discoverable off timeout
...
Dimitris Vlachos [Thu, 29 Feb 2024 19:17:23 +0000 (21:17 +0200)]
riscv: Sparse-Memory/vmemmap out-of-bounds fix
Offset vmemmap so that the first page of vmemmap will be mapped
to the first page of physical memory in order to ensure that
vmemmap’s bounds will be respected during
pfn_to_page()/page_to_pfn() operations.
The conversion macros will produce correct SV39/48/57 addresses
for every possible/valid DRAM_BASE inside the physical memory limits.
Palmer Dabbelt [Thu, 29 Feb 2024 18:21:25 +0000 (10:21 -0800)]
Merge patch series "NAPOT Fixes"
Alexandre Ghiti <alexghiti@rivosinc.com> says:
This contains 2 fixes for NAPOT: patch 1 disables the use of NAPOT
mapping for vmalloc/vmap and patch 2 implements pte_leaf_size() to
report NAPOT size.
* b4-shazam-merge:
riscv: Fix pte_leaf_size() for NAPOT
Revert "riscv: mm: support Svnapot in huge vmap"
We cannot correctly deal with NAPOT mappings in vmalloc/vmap because if
some part of a NAPOT mapping is unmapped, the remaining mapping is not
updated accordingly. For example:
0xffff8f8000ef0000-0xffff8f8000ef1000 0x00000001033c0000 4K PTE N .. .. D A G . . W R V
Meaning the first entry which was not unmapped still has the N bit set,
which, if accessed first and cached in the TLB, could allow access to the
unmapped range.
That's because the logic to break the NAPOT mapping does not exist and
likely won't. Indeed, to break a NAPOT mapping, we first have to clear
the whole mapping, flush the TLB and then set the new mapping ("break-
before-make" equivalent). That works fine in userspace since we can handle
any pagefault occurring on the remaining mapping but we can't handle a kernel
pagefault on such mapping.
So fix this by reverting the commit that introduced the vmap/vmalloc
support.
Palmer Dabbelt [Thu, 29 Feb 2024 18:20:19 +0000 (10:20 -0800)]
Merge patch series "riscv: cbo.zero fixes"
Samuel Holland <samuel.holland@sifive.com> says:
This series fixes a couple of issues related to using the cbo.zero
instruction in userspace. The first patch fixes a bug where the wrong
enable bit gets set if the kernel is running in M-mode. The remaining
patches fix a bug where the enable bit gets reset to its default value
after a nonretentive idle state. I have hardware which reproduces this:
Before this series:
$ tools/testing/selftests/riscv/hwprobe/cbo
TAP version 13
1..3
ok 1 Zicboz block size
# Zicboz block size: 64
Illegal instruction
After applying this series:
$ tools/testing/selftests/riscv/hwprobe/cbo
TAP version 13
1..3
ok 1 Zicboz block size
# Zicboz block size: 64
ok 2 cbo.zero
ok 3 cbo.zero check
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
* b4-shazam-merge:
riscv: Save/restore envcfg CSR during CPU suspend
riscv: Add a custom ISA extension for the [ms]envcfg CSR
riscv: Fix enabling cbo.zero when running in M-mode
Samuel Holland [Wed, 28 Feb 2024 06:55:34 +0000 (22:55 -0800)]
riscv: Add a custom ISA extension for the [ms]envcfg CSR
The [ms]envcfg CSR was added in version 1.12 of the RISC-V privileged
ISA (aka S[ms]1p12). However, bits in this CSR are defined by several
other extensions which may be implemented separately from any particular
version of the privileged ISA (for example, some unrelated errata may
prevent an implementation from claiming conformance with Ss1p12). As a
result, Linux cannot simply use the privileged ISA version to determine
if the CSR is present. It must also check if any of these other
extensions are implemented. It also cannot probe the existence of the
CSR at runtime, because Linux does not require Sstrict, so (in the
absence of additional information) it cannot know if a CSR at that
address is [ms]envcfg or part of some non-conforming vendor extension.
Since there are several standard extensions that imply the existence of
the [ms]envcfg CSR, it becomes unwieldy to check for all of them
wherever the CSR is accessed. Instead, define a custom Xlinuxenvcfg ISA
extension bit that is implied by the other extensions and denotes that
the CSR exists as defined in the privileged ISA, containing at least one
of the fields common between menvcfg and senvcfg.
This extension does not need to be parsed from the devicetree or ISA
string because it can only be implemented as a subset of some other
standard extension.
Cc: <stable@vger.kernel.org> # v6.7+ Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20240228065559.3434837-3-samuel.holland@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Fei Wu [Wed, 28 Feb 2024 11:54:25 +0000 (19:54 +0800)]
perf: RISCV: Fix panic on pmu overflow handler
(1 << idx) of int is not desired when setting bits in unsigned long
overflowed_ctrs, use BIT() instead. This panic happens when running
'perf record -e branches' on sophgo sg2042.
Samuel Holland [Thu, 15 Feb 2024 23:49:11 +0000 (15:49 -0800)]
MAINTAINERS: Update SiFive driver maintainers
Add myself as a maintainer for the various SiFive drivers, since I have
been performing cleanup activity on these drivers and reviewing patches
to them for a while now. Remove Palmer as a maintainer, as he is focused
on overall RISC-V architecture support.
Collapse some duplicate entries into the main SiFive drivers entry:
- Conor is already maintainer of standalone cache drivers as a whole,
and these files are also covered by the "sifive" file name regex.
- Paul's git tree has not been updated since 2018, and all file names
matching the "fu540" pattern also match the "sifive" pattern.
- Green has not been active on the LKML for a couple of years.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Acked-by: Paul Walmsley <paul.walmsley@sifive.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/20240215234941.1663791-1-samuel.holland@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Christophe Leroy [Fri, 23 Feb 2024 10:41:52 +0000 (11:41 +0100)]
kunit: Fix again checksum tests on big endian CPUs
Commit b38460bc463c ("kunit: Fix checksum tests on big endian CPUs")
fixed endianness issues with kunit checksum tests, but then
commit 6f4c45cbcb00 ("kunit: Add tests for csum_ipv6_magic and
ip_fast_csum") introduced new issues on big endian CPUs. Those issues
are once again reflected by the warnings reported by sparse.
So, fix them with the same approach, perform proper conversion in
order to support both little and big endian CPUs. Once the conversions
are properly done and the right types used, the sparse warnings are
cleared as well.
Reported-by: Erhard Furtner <erhard_f@mailbox.org> Fixes: 6f4c45cbcb00 ("kunit: Add tests for csum_ipv6_magic and ip_fast_csum") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Tested-by: Charlie Jenkins <charlie@rivosinc.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/73df3a9e95c2179119398ad1b4c84cdacbd8dfb6.1708684443.git.christophe.leroy@csgroup.eu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 29 Feb 2024 17:10:24 +0000 (09:10 -0800)]
Merge tag 'for-net-2024-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- mgmt: Fix limited discoverable off timeout
- hci_qca: Set BDA quirk bit if fwnode exists in DT
- hci_bcm4377: do not mark valid bd_addr as invalid
- hci_sync: Check the correct flag before starting a scan
- Enforce validation on max value of connection interval
- hci_sync: Fix accept_list when attempting to suspend
- hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
- Avoid potential use-after-free in hci_error_reset
- rfcomm: Fix null-ptr-deref in rfcomm_check_security
- hci_event: Fix wrongly recorded wakeup BD_ADDR
- qca: Fix wrong event type for patch config command
- qca: Fix triggering coredump implementation
* tag 'for-net-2024-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: qca: Fix triggering coredump implementation
Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
Bluetooth: qca: Fix wrong event type for patch config command
Bluetooth: Enforce validation on max value of connection interval
Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
Bluetooth: mgmt: Fix limited discoverable off timeout
Bluetooth: hci_event: Fix wrongly recorded wakeup BD_ADDR
Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security
Bluetooth: hci_sync: Fix accept_list when attempting to suspend
Bluetooth: Avoid potential use-after-free in hci_error_reset
Bluetooth: hci_sync: Check the correct flag before starting a scan
Bluetooth: hci_bcm4377: do not mark valid bd_addr as invalid
====================
====================
tls: a few more fixes for async decrypt
The previous patchset [1] took care of "full async". This adds a few
fixes for cases where only part of the crypto operations go the async
route, found by extending my previous debug patch [2] to do N
synchronous operations followed by M asynchronous ops (with N and M
configurable).
Sabrina Dubroca [Wed, 28 Feb 2024 22:44:00 +0000 (23:44 +0100)]
tls: fix use-after-free on failed backlog decryption
When the decrypt request goes to the backlog and crypto_aead_decrypt
returns -EBUSY, tls_do_decryption will wait until all async
decryptions have completed. If one of them fails, tls_do_decryption
will return -EBADMSG and tls_decrypt_sg jumps to the error path,
releasing all the pages. But the pages have been passed to the async
callback, and have already been released by tls_decrypt_done.
The only true async case is when crypto_aead_decrypt returns
-EINPROGRESS. With -EBUSY, we already waited so we can tell
tls_sw_recvmsg that the data is available for immediate copy, but we
need to notify tls_decrypt_sg (via the new ->async_done flag) that the
memory has already been released.
Sabrina Dubroca [Wed, 28 Feb 2024 22:43:59 +0000 (23:43 +0100)]
tls: separate no-async decryption request handling from async
If we're not doing async, the handling is much simpler. There's no
reference counting, we just need to wait for the completion to wake us
up and return its result.
We should preferably also use a separate crypto_wait. I'm not seeing a
UAF as I did in the past, I think aec7961916f3 ("tls: fix race between
async notify and socket close") took care of it.
Sabrina Dubroca [Wed, 28 Feb 2024 22:43:58 +0000 (23:43 +0100)]
tls: fix peeking with sync+async decryption
If we peek from 2 records with a currently empty rx_list, and the
first record is decrypted synchronously but the second record is
decrypted async, the following happens:
1. decrypt record 1 (sync)
2. copy from record 1 to the userspace's msg
3. queue the decrypted record to rx_list for future read(!PEEK)
4. decrypt record 2 (async)
5. queue record 2 to rx_list
6. call process_rx_list to copy data from the 2nd record
We currently pass copied=0 as skip offset to process_rx_list, so we
end up copying once again from the first record. We should skip over
the data we've already copied.
Seen with selftest tls.12_aes_gcm.recv_peek_large_buf_mult_recs
Sabrina Dubroca [Wed, 28 Feb 2024 22:43:57 +0000 (23:43 +0100)]
tls: decrement decrypt_pending if no async completion will be called
With mixed sync/async decryption, or failures of crypto_aead_decrypt,
we increment decrypt_pending but we never do the corresponding
decrement since tls_decrypt_done will not be called. In this case, we
should decrement decrypt_pending immediately to avoid getting stuck.
For example, the prequeue prequeue test gets stuck with mixed
modes (one async decrypt + one sync decrypt).
Takashi Sakamoto [Thu, 29 Feb 2024 13:17:37 +0000 (22:17 +0900)]
firewire: core: use long bus reset on gap count error
When resetting the bus after a gap count error, use a long rather than
short bus reset.
IEEE 1394-1995 uses only long bus resets. IEEE 1394a adds the option of
short bus resets. When video or audio transmission is in progress and a
device is hot-plugged elsewhere on the bus, the resulting bus reset can
cause video frame drops or audio dropouts. Short bus resets reduce or
eliminate this problem. Accordingly, short bus resets are almost always
preferred.
However, on a mixed 1394/1394a bus, a short bus reset can trigger an
immediate additional bus reset. This double bus reset can be interpreted
differently by different nodes on the bus, resulting in an inconsistent gap
count after the bus reset. An inconsistent gap count will cause another bus
reset, leading to a neverending bus reset loop. This only happens for some
bus topologies, not for all mixed 1394/1394a buses.
By instead sending a long bus reset after a gap count inconsistency, we
avoid the doubled bus reset, restoring the bus to normal operation.
Paolo Abeni [Thu, 29 Feb 2024 11:16:07 +0000 (12:16 +0100)]
Merge tag 'nf-24-02-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
Patch #1 restores NFPROTO_INET with nft_compat, from Ignat Korchagin.
Patch #2 fixes an issue with bridge netfilter and broadcast/multicast
packets.
There is a day 0 bug in br_netfilter when used with connection tracking.
Conntrack assumes that an nf_conn structure that is not yet added to
hash table ("unconfirmed"), is only visible by the current cpu that is
processing the sk_buff.
For bridge this isn't true, sk_buff can get cloned in between, and
clones can be processed in parallel on different cpu.
This patch disables NAT and conntrack helpers for multicast packets.
Patch #3 adds a selftest to cover for the br_netfilter bug.
netfilter pull request 24-02-29
* tag 'nf-24-02-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: add bridge conntrack + multicast test case
netfilter: bridge: confirm multicast packets before passing them up the stack
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
====================
The current code adds extra two bytes (i.e. sizeof(struct hsr_sup_tlv))
when offset for skb_pull() is calculated.
This is wrong, as both 'struct hsrv1_ethhdr_sp' and 'hsrv0_ethhdr_sp'
already have 'struct hsr_sup_tag' defined in them, so there is no need
for adding extra two bytes.
This code was working correctly as with no RedBox support, the check for
HSR_TLV_EOT (0x00) was off by two bytes, which were corresponding to
zeroed padded bytes for minimal packet size.
Fixes: eafaa88b3eb7 ("net: hsr: Add support for redbox supervision frames") Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240228085644.3618044-1-lukma@denx.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Mika Kuoppala [Thu, 15 Feb 2024 18:11:52 +0000 (20:11 +0200)]
drm/xe: Deny unbinds if uapi ufence pending
If user fence was provided for MAP in vm_bind_ioctl
and it has still not been signalled, deny UNMAP of said
vma with EBUSY as long as unsignalled fence exists.
This guarantees that MAP vs UNMAP sequences won't
escape under the radar if we ever want to track the
client's state wrt to completed and accessible MAPs.
By means of intercepting the ufence release signalling.
v2: find ufence with num_fences > 1 (Matt)
v3: careful on clearing vma ufence (Matt)
Mika Kuoppala [Thu, 15 Feb 2024 18:11:51 +0000 (20:11 +0200)]
drm/xe: Expose user fence from xe_sync_entry
By allowing getting reference to user fence, we can
control the lifetime outside of sync entries.
This is needed to allow vma to track the associated
user fence that was provided with bind ioctl.
v2: xe_user_fence can be kept opaque (Jani, Matt)
v3: indent fix (Matt)
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240215181152.450082-2-mika.kuoppala@linux.intel.com
(cherry picked from commit 977e5b82e0901480bc201342d39f855fc0a2ef47) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Lucas De Marchi [Thu, 22 Feb 2024 14:41:24 +0000 (06:41 -0800)]
drm/xe: Use pointers in trace events
Commit a0df2cc858c3 ("drm/xe/xe_bo_move: Enhance xe_bo_move trace")
inadvertently reverted commit 8d038f49c1f3 ("drm/xe: Fix cast on trace
variable"), breaking the build on 32bits.
As noted by Ville, there's no point in converting the pointers to u64
and add casts everywhere. In fact, it's better to just use %p and let
the address be hashed. Convert all the cases in xe_trace.h to use
pointers.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Priyanka Dandamudi <priyanka.dandamudi@intel.com> Cc: Oak Zeng <oak.zeng@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240222144125.2862546-1-lucas.demarchi@intel.com
(cherry picked from commit 7a975748d4dc0a524c99a390c6f74b7097ef8cf7) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Enhanced xe_bo_move trace to be more readable.
It will help to show the migration details.
Src and dst details.
v2: Modify trace_xe_bo_move(), it takes the integer mem_type
rather than a string.
Make mem_type_to_name() extern, it will be used by trace.(Thomas)
v3: Move mem_type_to_name() to xe_bo.[ch] (Thomas, Matt)
v4: Add device details to reduce ambiquity related to vram0/vram1. (Oak)
v5: Rename mem_type_to_name to xe_mem_type_to_name. (Thomas)
v6: Optimised code to use xe_bo_device(__entry->bo). (Thomas)
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Oak Zeng <oak.zeng@intel.com> Cc: Kempczynski Zbigniew <Zbigniew.Kempczynski@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Brian Welty <brian.welty@intel.com> Signed-off-by: Priyanka Dandamudi <priyanka.dandamudi@intel.com> Reviewed-by: Oak Zeng <oak.zeng@intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240220044748.948496-1-priyanka.dandamudi@intel.com
(cherry picked from commit a0df2cc858c309a8bc2e87b4274772587aa25e05) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Arnd Bergmann [Mon, 26 Feb 2024 12:46:37 +0000 (13:46 +0100)]
drm/xe/mmio: fix build warning for BAR resize on 32-bit
clang complains about a nonsensical test on builds with a 32-bit phys_addr_t,
which means resizing will always fail:
drivers/gpu/drm/xe/xe_mmio.c:109:23: error: result of comparison of constant 4294967296 with expression of type 'resource_size_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
109 | root_res->start > 0x100000000ull)
| ~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~
Previously, BAR resize was always disallowed on 32-bit kernels, but
this apparently changed recently. Since 32-bit machines can in theory
support PAE/LPAE for large address spaces, this may end up useful,
so change the driver to shut up the warning but still work when
phys_addr_t/resource_size_t is 64 bit wide.
Fixes: 9a6e6c14bfde ("drm/xe/mmio: Use non-atomic writeq/readq variant for 32b") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240226124736.1272949-2-arnd@kernel.org Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit f5d3983366c0b88ec388b3407b29c1c0862ee2b8) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Paulo Zanoni [Thu, 15 Feb 2024 00:53:53 +0000 (16:53 -0800)]
drm/xe: get rid of MAX_BINDS
Mesa has been issuing a single bind operation per ioctl since xe.ko
changed to GPUVA due xe.ko bug #746. If I change Mesa to try again to
issue every single bind operation it can in the same ioctl, it hits
the MAX_BINDS assertion when running Vulkan conformance tests.
Test dEQP-VK.sparse_resources.transfer_queue.3d.rgba32i.1024_128_8
issues 960 bind operations in a single ioctl, it's the most I could
find in the conformance suite.
I don't see a reason to keep the MAX_BINDS restriction: it doesn't
seem to be preventing any specific issue. If the number is too big for
the memory allocations, then those will fail. Nothing related to
num_binds seems to be using the stack. Let's just get rid of it.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Testcase: dEQP-VK.sparse_resources.transfer_queue.3d.rgba32i.1024_128_8
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/746 Cc: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240215005353.1295420-1-paulo.r.zanoni@intel.com
(cherry picked from commit ba6bbdc6eaef92998ec7f323c9e1211d344d2556) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Matthew Brost [Mon, 26 Feb 2024 15:55:54 +0000 (07:55 -0800)]
drm/xe: Use vmalloc for array of bind allocation in bind IOCTL
Use vmalloc in effort to allow a user pass in a large number of binds in
an IOCTL (mesa use case). Also use array allocations rather open coding
the size calculation.
Matthew Brost [Thu, 22 Feb 2024 23:20:21 +0000 (15:20 -0800)]
drm/xe: Don't support execlists in xe_gt_tlb_invalidation layer
The xe_gt_tlb_invalidation layer implements TLB invalidations for a GuC
backend. Simply return if in execlists mode. A follow up may properly
implement the xe_gt_tlb_invalidation layer for both GuC and execlists.
Matthew Brost [Thu, 22 Feb 2024 23:20:19 +0000 (15:20 -0800)]
drm/xe: Fix execlist splat
Although execlist submission is not supported it should be kept in a
basic working state as it can be used for very early hardware bring up.
Fix the below splat.
Francois Dugast [Thu, 22 Feb 2024 23:23:56 +0000 (18:23 -0500)]
drm/xe/uapi: Remove unused flags
Those cases missed in previous uAPI cleanups were mostly accidentally
brought in from i915 or created to exercise the possibilities of gpuvm
but they are not used by userspace yet, so let's remove them. They can
still be brought back later if needed.
v2:
- Fix XE_VM_FLAG_FAULT_MODE support in xe_lrc.c (Brian Welty)
- Leave DRM_XE_VM_BIND_OP_UNMAP_ALL (José Roberto de Souza)
- Ensure invalid flag values are rejected (Rodrigo Vivi)
v3: Rebase after removal of persistent exec_queues (Francois Dugast)
v4: Rodrigo: Rebase after the new dumpable flag.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Francois Dugast <francois.dugast@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240222232356.175431-1-rodrigo.vivi@intel.com
(cherry picked from commit 84a1ed5e67565b09b8fd22a26754d2897de55ce0) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Add the flag XE_VM_BIND_FLAG_DUMPABLE to notify devcoredump that this
mapping should be dumped.
This is not hooked up, but the uapi should be ready before merging.
It's likely easier to dump the contents of the bo's at devcoredump
readout time, so it's better if the bos will stay unmodified after
a hang. The NEEDS_CPU_MAPPING flag is removed as requirement.
Takashi Iwai [Thu, 29 Feb 2024 07:29:04 +0000 (08:29 +0100)]
Merge tag 'asoc-fix-v6.8-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.8
A few small fixes, some driver specific and one slightly larger one
from Richard which adds a new core helper and updates a small clutch of
drivers to deal with the fact that they were using a helper which
requires that the lock for the list of controls without holding that
lock. We also have some quirks for new AMD based Lenovo systems.
Oleksij Rempel [Tue, 27 Feb 2024 18:49:41 +0000 (10:49 -0800)]
igb: extend PTP timestamp adjustments to i211
The i211 requires the same PTP timestamp adjustments as the i210,
according to its datasheet. To ensure consistent timestamping across
different platforms, this change extends the existing adjustments to
include the i211.
The adjustment result are tested and comparable for i210 and i211 based
systems.
Fixes: 3f544d2a4d5c ("igb: adjust PTP timestamps for Tx/Rx latency") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240227184942.362710-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lin Ma [Tue, 27 Feb 2024 12:11:28 +0000 (20:11 +0800)]
rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
In the commit d73ef2d69c0d ("rtnetlink: let rtnl_bridge_setlink checks
IFLA_BRIDGE_MODE length"), an adjustment was made to the old loop logic
in the function `rtnl_bridge_setlink` to enable the loop to also check
the length of the IFLA_BRIDGE_MODE attribute. However, this adjustment
removed the `break` statement and led to an error logic of the flags
writing back at the end of this function.
if (have_flags)
memcpy(nla_data(attr), &flags, sizeof(flags));
// attr should point to IFLA_BRIDGE_FLAGS NLA !!!
Before the mentioned commit, the `attr` is granted to be IFLA_BRIDGE_FLAGS.
However, this is not necessarily true fow now as the updated loop will let
the attr point to the last NLA, even an invalid NLA which could cause
overflow writes.
This patch introduces a new variable `br_flag` to save the NLA pointer
that points to IFLA_BRIDGE_FLAGS and uses it to resolve the mentioned
error logic.
Fixes: d73ef2d69c0d ("rtnetlink: let rtnl_bridge_setlink checks IFLA_BRIDGE_MODE length") Signed-off-by: Lin Ma <linma@zju.edu.cn> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240227121128.608110-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 26 Feb 2024 21:40:18 +0000 (13:40 -0800)]
tools: ynl: fix handling of multiple mcast groups
We never increment the group number iterator, so all groups
get recorded into index 0 of the mcast_groups[] array.
As a result YNL can only handle using the last group.
For example using the "netdev" sample on kernel with
page pool commands results in:
$ ./samples/netdev
YNL: Multicast group 'mgmt' not found
Most families have only one multicast group, so this hasn't
been noticed. Plus perhaps developers usually test the last
group which would have worked.
Fixes: 86878f14d71a ("tools: ynl: user space helpers") Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20240226214019.1255242-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal [Tue, 27 Feb 2024 15:17:51 +0000 (16:17 +0100)]
netfilter: bridge: confirm multicast packets before passing them up the stack
conntrack nf_confirm logic cannot handle cloned skbs referencing
the same nf_conn entry, which will happen for multicast (broadcast)
frames on bridges.
Example:
macvlan0
|
br0
/ \
ethX ethY
ethX (or Y) receives a L2 multicast or broadcast packet containing
an IP packet, flow is not yet in conntrack table.
1. skb passes through bridge and fake-ip (br_netfilter)Prerouting.
-> skb->_nfct now references a unconfirmed entry
2. skb is broad/mcast packet. bridge now passes clones out on each bridge
interface.
3. skb gets passed up the stack.
4. In macvlan case, macvlan driver retains clone(s) of the mcast skb
and schedules a work queue to send them out on the lower devices.
The clone skb->_nfct is not a copy, it is the same entry as the
original skb. The macvlan rx handler then returns RX_HANDLER_PASS.
5. Normal conntrack hooks (in NF_INET_LOCAL_IN) confirm the orig skb.
The Macvlan broadcast worker and normal confirm path will race.
This race will not happen if step 2 already confirmed a clone. In that
case later steps perform skb_clone() with skb->_nfct already confirmed (in
hash table). This works fine.
But such confirmation won't happen when eb/ip/nftables rules dropped the
packets before they reached the nf_confirm step in postrouting.
Pablo points out that nf_conntrack_bridge doesn't allow use of stateful
nat, so we can safely discard the nf_conn entry and let inet call
conntrack again.
This doesn't work for bridge netfilter: skb could have a nat
transformation. Also bridge nf prevents re-invocation of inet prerouting
via 'sabotage_in' hook.
Work around this problem by explicit confirmation of the entry at LOCAL_IN
time, before upper layer has a chance to clone the unconfirmed entry.
The downside is that this disables NAT and conntrack helpers.
Alternative fix would be to add locking to all code parts that deal with
unconfirmed packets, but even if that could be done in a sane way this
opens up other problems, for example:
For multicast case, only one of such conflicting mappings will be
created, conntrack only handles 1:1 NAT mappings.
Users should set create a setup that explicitly marks such traffic
NOTRACK (conntrack bypass) to avoid this, but we cannot auto-bypass
them, ruleset might have accept rules for untracked traffic already,
so user-visible behaviour would change.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217777 Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Ignat Korchagin [Thu, 22 Feb 2024 10:33:08 +0000 (10:33 +0000)]
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
Commit d0009effa886 ("netfilter: nf_tables: validate NFPROTO_* family") added
some validation of NFPROTO_* families in the nft_compat module, but it broke
the ability to use legacy iptables modules in dual-stack nftables.
While with legacy iptables one had to independently manage IPv4 and IPv6
tables, with nftables it is possible to have dual-stack tables sharing the
rules. Moreover, it was possible to use rules based on legacy iptables
match/target modules in dual-stack nftables.
As an example, the program from [2] creates an INET dual-stack family table
using an xt_bpf based rule, which looks like the following (the actual output
was generated with a patched nft tool as the current nft tool does not parse
dual stack tables with legacy match rules, so consider it for illustrative
purposes only):
After d0009effa886 ("netfilter: nf_tables: validate NFPROTO_* family") we get
EOPNOTSUPP for the above program.
Fix this by allowing NFPROTO_INET for nft_(match/target)_validate(), but also
restrict the functions to classic iptables hooks.
Changes in v3:
* clarify that upstream nft will not display such configuration properly and
that the output was generated with a patched nft tool
* remove example program from commit description and link to it instead
* no code changes otherwise
Changes in v2:
* restrict nft_(match/target)_validate() to classic iptables hooks
* rewrite example program to use unmodified libnftnl
Ryan Lin [Wed, 28 Feb 2024 18:39:21 +0000 (11:39 -0700)]
drm/amd/display: Add monitor patch for specific eDP
[WHY]
Some eDP panels' ext caps don't write initial values. The value of
dpcd_addr (0x317) can be random and the backlight control interface
will be incorrect.
[HOW]
Add new panel patches to remove sink ext caps.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.5.x Cc: Tsung-hua Lin <tsung-hua.lin@amd.com> Cc: Chris Chi <moukong.chi@amd.com> Reviewed-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Linus Torvalds [Wed, 28 Feb 2024 20:20:00 +0000 (12:20 -0800)]
Merge tag 'acpi-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert a recent EC driver change that introduced an unexpected and
undesirable user-visible difference in behavior (Rafael Wysocki)"
* tag 'acpi-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: EC: Use a spin lock without disabing interrupts"
Linus Torvalds [Wed, 28 Feb 2024 20:18:31 +0000 (12:18 -0800)]
Merge tag 'pm-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a latent bug in the intel-pstate cpufreq driver that has been
exposed by the recent schedutil governor changes (Doug Smythies)"
* tag 'pm-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: fix pstate limits enforcement for adjust_perf call back
Linus Torvalds [Wed, 28 Feb 2024 19:16:19 +0000 (11:16 -0800)]
Merge tag 'spi-fix-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There's two things here - the big one is a batch of fixes for the
power management in the Cadence QuadSPI driver which had some serious
issues with runtime PM and there's also a revert of one of the last
batch of fixes for ppc4xx which has a dependency on -next but was in
between two mainline fixes so the -next dependency got missed.
The ppc4xx driver is not currently included in any defconfig and has
dependencies that exclude it from allmodconfigs so none of the CI
systems catch issues with it, hence the need for the earlier fixes
series. There's some updates to the PowerPC configs to address this"
* tag 'spi-fix-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Drop mismerged fix
spi: cadence-qspi: add system-wide suspend and resume callbacks
spi: cadence-qspi: put runtime in runtime PM hooks names
spi: cadence-qspi: remove system-wide suspend helper calls from runtime PM hooks
spi: cadence-qspi: fix pointer reference in runtime PM hooks
Linus Torvalds [Wed, 28 Feb 2024 19:10:27 +0000 (11:10 -0800)]
Merge tag 'regulator-fix-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Two small fixes, one small update for the max5970 driver bringing the
driver and DT binding documentation into sync plus a missed update to
the patterns in MAINTAINERS after a DT binding YAML conversion"
* tag 'regulator-fix-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max5970: Fix regulator child node name
MAINTAINERS: repair entry for MICROCHIP MCP16502 PMIC DRIVER
Linus Torvalds [Wed, 28 Feb 2024 17:30:26 +0000 (09:30 -0800)]
Merge tag 'v6.8-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a regression in lskcipher and an out-of-bound access
in arm64/neonbs"
* tag 'v6.8-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: arm64/neonbs - fix out-of-bounds access on short input
crypto: lskcipher - Copy IV in lskcipher glue code always
Commit 'e3e56c050ab6 ("soc: qcom: rpmhpd: Make power_on actually enable
the domain")' aimed to make sure that a power-domain that is being
enabled without any particular performance-state requested will at least
turn the rail on, to avoid filling DeviceTree with otherwise unnecessary
required-opps properties.
But in the event that aggregation happens on a disabled power-domain, with
an enabled peer without performance-state, both the local and peer
corner are 0. The peer's enabled_corner is not considered, with the
result that the underlying (shared) resource is disabled.
One case where this can be observed is when the display stack keeps mmcx
enabled (but without a particular performance-state vote) in order to
access registers and sync_state happens in the rpmhpd driver. As mmcx_ao
is flushed the state of the peer (mmcx) is not considered and mmcx_ao
ends up turning off "mmcx.lvl" underneath mmcx. This has been observed
several times, but has been painted over in DeviceTree by adding an
explicit vote for the lowest non-disabled performance-state.
Fixes: e3e56c050ab6 ("soc: qcom: rpmhpd: Make power_on actually enable the domain") Reported-by: Johan Hovold <johan@kernel.org> Closes: https://lore.kernel.org/linux-arm-msm/ZdMwZa98L23mu3u6@hovoldconsulting.com/ Cc: <stable@vger.kernel.org> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240226-rpmhpd-enable-corner-fix-v1-1-68c004cec48c@quicinc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
hci_coredump_qca() uses __hci_cmd_sync() to send a vendor-specific command
to trigger firmware coredump, but the command does not have any event as
its sync response, so it is not suitable to use __hci_cmd_sync(), fixed by
using __hci_cmd_send().
Fixes: 06d3fdfcdf5c ("Bluetooth: hci_qca: Add qcom devcoredump support") Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
BT adapter going into UNCONFIGURED state during BT turn ON when
devicetree has no local-bd-address node.
Bluetooth will not work out of the box on such devices, to avoid this
problem, added check to set HCI_QUIRK_USE_BDADDR_PROPERTY based on
local-bd-address node entry.
When this quirk is not set, the public Bluetooth address read by host
from controller though HCI Read BD Address command is
considered as valid.
Fixes: e668eb1e1578 ("Bluetooth: hci_core: Don't stop BT if the BD address missing in dts") Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Zijun Hu [Fri, 19 Jan 2024 09:45:30 +0000 (17:45 +0800)]
Bluetooth: qca: Fix wrong event type for patch config command
Vendor-specific command patch config has HCI_Command_Complete event as
response, but qca_send_patch_config_cmd() wrongly expects vendor-specific
event for the command, fixed by using right event type.
Kai-Heng Feng [Thu, 25 Jan 2024 06:50:28 +0000 (14:50 +0800)]
Bluetooth: Enforce validation on max value of connection interval
Right now Linux BT stack cannot pass test case "GAP/CONN/CPUP/BV-05-C
'Connection Parameter Update Procedure Invalid Parameters Central
Responder'" in Bluetooth Test Suite revision GAP.TS.p44. [0]
That was revoled by commit c49a8682fc5d ("Bluetooth: validate BLE
connection interval updates"), but later got reverted due to devices
like keyboards and mice may require low connection interval.
So only validate the max value connection interval to pass the Test
Suite, and let devices to request low connection interval if needed.
Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
If we received HCI_EV_IO_CAPA_REQUEST while
HCI_OP_READ_REMOTE_EXT_FEATURES is yet to be responded assume the remote
does support SSP since otherwise this event shouldn't be generated.
Frédéric Danis [Mon, 22 Jan 2024 16:59:55 +0000 (17:59 +0100)]
Bluetooth: mgmt: Fix limited discoverable off timeout
LIMITED_DISCOVERABLE flag is not reset from Class of Device and
advertisement on limited discoverable timeout. This prevents to pass PTS
test GAP/DISC/LIMM/BV-02-C
Calling set_discoverable_sync as when the limited discovery is set
correctly update the Class of Device and advertisement.
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
projects / linux-stable / log