* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE\r
* POSSIBILITY OF SUCH DAMAGE.\r
*\r
-* @file bme280.h\r
-* @date 2020-01-24\r
-* @version v3.4.3\r
+* @file bme280.h\r
+* @date 2020-03-28\r
+* @version v3.5.0\r
*\r
*/\r
\r
*/\r
\r
/*!\r
- * @defgroup BME280 SENSOR API\r
+ * @defgroup bme280 BME280\r
+ * @brief <a href="https://www.bosch-sensortec.com/bst/products/all_products/bme280">Product Overview</a>\r
+ * and <a href="https://github.com/BoschSensortec/BME280_driver">Sensor API Source Code</a>\r
*/\r
+\r
#ifndef BME280_H_\r
#define BME280_H_\r
\r
/* Header includes */\r
#include "bme280_defs.h"\r
\r
+/**\r
+ * \ingroup bme280\r
+ * \defgroup bme280ApiInit Initialization\r
+ * @brief Initialize the sensor and device structure\r
+ */\r
+\r
/*!\r
- * @brief This API is the entry point.\r
- * It reads the chip-id and calibration data from the sensor.\r
+ * \ingroup bme280ApiInit\r
+ * \page bme280_api_bme280_init bme280_init\r
+ * \code\r
+ * int8_t bme280_init(struct bme280_dev *dev);\r
+ * \endcode\r
+ * @details This API reads the chip-id of the sensor which is the first step to\r
+ * verify the sensor and also calibrates the sensor\r
+ * As this API is the entry point, call this API before using other APIs.\r
+ *\r
+ * @param[in,out] dev : Structure instance of bme280_dev\r
+ *\r
+ * @return Result of API execution status.\r
*\r
- * @param[in,out] dev : Structure instance of bme280_dev\r
+ * @retval 0 -> Success.\r
+ * @retval > 0 -> Warning.\r
+ * @retval < 0 -> Fail.\r
*\r
- * @return Result of API execution status\r
- * @retval zero -> Success / +ve value -> Warning / -ve value -> Error\r
*/\r
int8_t bme280_init(struct bme280_dev *dev);\r
\r
+/**\r
+ * \ingroup bme280\r
+ * \defgroup bme280ApiRegister Registers\r
+ * @brief Generic API for accessing sensor registers\r
+ */\r
+\r
/*!\r
- * @brief This API writes the given data to the register address\r
- * of the sensor.\r
+ * \ingroup bme280ApiRegister\r
+ * \page bme280_api_bme280_set_regs bme280_set_regs\r
+ * \code\r
+ * int8_t bme280_set_regs(const uint8_t reg_addr, const uint8_t *reg_data, uint8_t len, struct bme280_dev *dev);\r
+ * \endcode\r
+ * @details This API writes the given data to the register address of the sensor\r
*\r
- * @param[in] reg_addr : Register address from where the data to be written.\r
+ * @param[in] reg_addr : Register addresses to where the data is to be written\r
* @param[in] reg_data : Pointer to data buffer which is to be written\r
- * in the sensor.\r
- * @param[in] len : No of bytes of data to write..\r
- * @param[in] dev : Structure instance of bme280_dev.\r
+ * in the reg_addr of sensor.\r
+ * @param[in] len : No of bytes of data to write\r
+ * @param[in,out] dev : Structure instance of bme280_dev\r
+ *\r
+ * @return Result of API execution status.\r
+ *\r
+ * @retval 0 -> Success.\r
+ * @retval > 0 -> Warning.\r
+ * @retval < 0 -> Fail.\r
*\r
- * @return Result of API execution status\r
- * @retval zero -> Success / +ve value -> Warning / -ve value -> Error\r
*/\r
-int8_t bme280_set_regs(uint8_t *reg_addr, const uint8_t *reg_data, uint8_t len, const struct bme280_dev *dev);\r
+int8_t bme280_set_regs(uint8_t *reg_addr, const uint8_t *reg_data, uint8_t len, struct bme280_dev *dev);\r
\r
/*!\r
- * @brief This API reads the data from the given register address of the sensor.\r
+ * \ingroup bme280ApiRegister\r
+ * \page bme280_api_bme280_get_regs bme280_get_regs\r
+ * \code\r
+ * int8_t bme280_get_regs(uint8_t reg_addr, uint8_t *reg_data, uint8_t len, struct bme280_dev *dev);\r
+ * \endcode\r
+ * @details This API reads the data from the given register address of sensor.\r
*\r
- * @param[in] reg_addr : Register address from where the data to be read\r
+ * @param[in] reg_addr : Register address from where the data to be read\r
* @param[out] reg_data : Pointer to data buffer to store the read data.\r
- * @param[in] len : No of bytes of data to be read.\r
- * @param[in] dev : Structure instance of bme280_dev.\r
+ * @param[in] len : No of bytes of data to be read.\r
+ * @param[in,out] dev : Structure instance of bme280_dev.\r
*\r
- * @return Result of API execution status\r
- * @retval zero -> Success / +ve value -> Warning / -ve value -> Error\r
+ * @return Result of API execution status.\r
+ *\r
+ * @retval 0 -> Success.\r
+ * @retval > 0 -> Warning.\r
+ * @retval < 0 -> Fail.\r
+ *\r
+ */\r
+int8_t bme280_get_regs(uint8_t reg_addr, uint8_t *reg_data, uint16_t len, struct bme280_dev *dev);\r
+\r
+/**\r
+ * \ingroup bme280\r
+ * \defgroup bme280ApiSensorSettings Sensor Settings\r
+ * @brief Generic API for accessing sensor settings\r
*/\r
-int8_t bme280_get_regs(uint8_t reg_addr, uint8_t *reg_data, uint16_t len, const struct bme280_dev *dev);\r
\r
/*!\r
- * @brief This API sets the oversampling, filter and standby duration\r
+ * \ingroup bme280ApiSensorSettings\r
+ * \page bme280_api_bme280_set_sensor_settings bme280_set_sensor_settings\r
+ * \code\r
+ * int8_t bme280_set_sensor_settings(uint8_t desired_settings, const struct bme280_dev *dev);\r
+ * \endcode\r
+ * @details This API sets the oversampling, filter and standby duration\r
* (normal mode) settings in the sensor.\r
*\r
* @param[in] dev : Structure instance of bme280_dev.\r
* BME280_STANDBY_SEL | To set standby duration setting.\r
*\r
* @return Result of API execution status\r
- * @retval zero -> Success / +ve value -> Warning / -ve value -> Error.\r
+ *\r
+ * @retval 0 -> Success.\r
+ * @retval > 0 -> Warning.\r
+ * @retval < 0 -> Fail.\r
+ *\r
*/\r
-int8_t bme280_set_sensor_settings(uint8_t desired_settings, const struct bme280_dev *dev);\r
+int8_t bme280_set_sensor_settings(uint8_t desired_settings, struct bme280_dev *dev);\r
\r
/*!\r
- * @brief This API gets the oversampling, filter and standby duration\r
+ * \ingroup bme280ApiSensorSettings\r
+ * \page bme280_api_bme280_get_sensor_settings bme280_get_sensor_settings\r
+ * \code\r
+ * int8_t bme280_get_sensor_settings(struct bme280_dev *dev);\r
+ * \endcode\r
+ * @details This API gets the oversampling, filter and standby duration\r
* (normal mode) settings from the sensor.\r
*\r
* @param[in,out] dev : Structure instance of bme280_dev.\r
*\r
* @return Result of API execution status\r
- * @retval zero -> Success / +ve value -> Warning / -ve value -> Error.\r
+ *\r
+ * @retval 0 -> Success.\r
+ * @retval > 0 -> Warning.\r
+ * @retval < 0 -> Fail.\r
+ *\r
*/\r
int8_t bme280_get_sensor_settings(struct bme280_dev *dev);\r
\r
+/**\r
+ * \ingroup bme280\r
+ * \defgroup bme280ApiSensorMode Sensor Mode\r
+ * @brief Generic API for configuring sensor power mode\r
+ */\r
+\r
/*!\r
- * @brief This API sets the power mode of the sensor.\r
+ * \ingroup bme280ApiSensorMode\r
+ * \page bme280_api_bme280_set_sensor_mode bme280_set_sensor_mode\r
+ * \code\r
+ * int8_t bme280_set_sensor_mode(uint8_t sensor_mode, const struct bme280_dev *dev);\r
+ * \endcode\r
+ * @details This API sets the power mode of the sensor.\r
*\r
* @param[in] dev : Structure instance of bme280_dev.\r
* @param[in] sensor_mode : Variable which contains the power mode to be set.\r
* 3 | BME280_NORMAL_MODE\r
*\r
* @return Result of API execution status\r
- * @retval zero -> Success / +ve value -> Warning / -ve value -> Error\r
+ *\r
+ * @retval 0 -> Success.\r
+ * @retval > 0 -> Warning.\r
+ * @retval < 0 -> Fail.\r
+ *\r
*/\r
-int8_t bme280_set_sensor_mode(uint8_t sensor_mode, const struct bme280_dev *dev);\r
+int8_t bme280_set_sensor_mode(uint8_t sensor_mode, struct bme280_dev *dev);\r
\r
/*!\r
- * @brief This API gets the power mode of the sensor.\r
+ * \ingroup bme280ApiSensorMode\r
+ * \page bme280_api_bme280_get_sensor_mode bme280_get_sensor_mode\r
+ * \code\r
+ * int8_t bme280_get_sensor_mode(uint8_t *sensor_mode, const struct bme280_dev *dev);\r
+ * \endcode\r
+ * @details This API gets the power mode of the sensor.\r
*\r
* @param[in] dev : Structure instance of bme280_dev.\r
* @param[out] sensor_mode : Pointer variable to store the power mode.\r
* 3 | BME280_NORMAL_MODE\r
*\r
* @return Result of API execution status\r
- * @retval zero -> Success / +ve value -> Warning / -ve value -> Error\r
+ *\r
+ * @retval 0 -> Success.\r
+ * @retval > 0 -> Warning.\r
+ * @retval < 0 -> Fail.\r
+ *\r
+ */\r
+int8_t bme280_get_sensor_mode(uint8_t *sensor_mode, struct bme280_dev *dev);\r
+\r
+/**\r
+ * \ingroup bme280\r
+ * \defgroup bme280ApiSystem System\r
+ * @brief API that performs system-level operations\r
*/\r
-int8_t bme280_get_sensor_mode(uint8_t *sensor_mode, const struct bme280_dev *dev);\r
\r
/*!\r
- * @brief This API performs the soft reset of the sensor.\r
+ * \ingroup bme280ApiSystem\r
+ * \page bme280_api_bme280_soft_reset bme280_soft_reset\r
+ * \code\r
+ * int8_t bme280_soft_reset(struct bme280_dev *dev);\r
+ * \endcode\r
+ * @details This API soft-resets the sensor.\r
*\r
- * @param[in] dev : Structure instance of bme280_dev.\r
+ * @param[in,out] dev : Structure instance of bme280_dev.\r
*\r
- * @return Result of API execution status\r
- * @retval zero -> Success / +ve value -> Warning / -ve value -> Error.\r
+ * @return Result of API execution status.\r
+ *\r
+ * @retval 0 -> Success.\r
+ * @retval > 0 -> Warning.\r
+ * @retval < 0 -> Fail.\r
+ *\r
+ */\r
+int8_t bme280_soft_reset(struct bme280_dev *dev);\r
+\r
+/**\r
+ * \ingroup bme280\r
+ * \defgroup bme280ApiSensorData Sensor Data\r
+ * @brief Data processing of sensor\r
*/\r
-int8_t bme280_soft_reset(const struct bme280_dev *dev);\r
\r
/*!\r
- * @brief This API reads the pressure, temperature and humidity data from the\r
+ * \ingroup bme280ApiSensorData\r
+ * \page bme280_api_bme280_get_sensor_data bme280_get_sensor_data\r
+ * \code\r
+ * int8_t bme280_get_sensor_data(uint8_t sensor_comp, struct bme280_data *comp_data, struct bme280_dev *dev);\r
+ * \endcode\r
+ * @details This API reads the pressure, temperature and humidity data from the\r
* sensor, compensates the data and store it in the bme280_data structure\r
* instance passed by the user.\r
*\r
* @param[in] dev : Structure instance of bme280_dev.\r
*\r
* @return Result of API execution status\r
- * @retval zero -> Success / +ve value -> Warning / -ve value -> Error\r
+ *\r
+ * @retval 0 -> Success.\r
+ * @retval > 0 -> Warning.\r
+ * @retval < 0 -> Fail.\r
+ *\r
*/\r
int8_t bme280_get_sensor_data(uint8_t sensor_comp, struct bme280_data *comp_data, struct bme280_dev *dev);\r
\r
/*!\r
- * @brief This API is used to parse the pressure, temperature and\r
+ * \ingroup bme280ApiSensorData\r
+ * \page bme280_api_bme280_parse_sensor_data bme280_parse_sensor_data\r
+ * \code\r
+ * void bme280_parse_sensor_data(const uint8_t *reg_data, struct bme280_uncomp_data *uncomp_data);\r
+ * \endcode\r
+ * @details This API is used to parse the pressure, temperature and\r
* humidity data and store it in the bme280_uncomp_data structure instance.\r
*\r
* @param[in] reg_data : Contains register data which needs to be parsed\r
* @param[out] uncomp_data : Contains the uncompensated pressure, temperature\r
* and humidity data.\r
+ *\r
*/\r
void bme280_parse_sensor_data(const uint8_t *reg_data, struct bme280_uncomp_data *uncomp_data);\r
\r
/*!\r
- * @brief This API is used to compensate the pressure and/or\r
+ * \ingroup bme280ApiSensorData\r
+ * \page bme280_api_bme280_compensate_data bme280_compensate_data\r
+ * \code\r
+ * int8_t bme280_compensate_data(uint8_t sensor_comp,\r
+ * const struct bme280_uncomp_data *uncomp_data,\r
+ * struct bme280_data *comp_data,\r
+ * struct bme280_calib_data *calib_data);\r
+ * \endcode\r
+ * @details This API is used to compensate the pressure and/or\r
* temperature and/or humidity data according to the component selected by the\r
* user.\r
*\r
* @param[in] calib_data : Pointer to the calibration data structure.\r
*\r
* @return Result of API execution status.\r
- * @retval zero -> Success / -ve value -> Error\r
+ *\r
+ * @retval 0 -> Success.\r
+ * @retval > 0 -> Warning.\r
+ * @retval < 0 -> Fail.\r
+ *\r
*/\r
int8_t bme280_compensate_data(uint8_t sensor_comp,\r
const struct bme280_uncomp_data *uncomp_data,\r
struct bme280_data *comp_data,\r
struct bme280_calib_data *calib_data);\r
\r
+/**\r
+ * \ingroup bme280\r
+ * \defgroup bme280ApiSensorDelay Sensor Delay\r
+ * @brief Generic API for measuring sensor delay\r
+ */\r
+\r
/*!\r
+ * \ingroup bme280ApiSensorDelay\r
+ * \page bme280_api_bme280_cal_meas_delay bme280_cal_meas_delay\r
+ * \code\r
+ * uint32_t bme280_cal_meas_delay(const struct bme280_settings *settings);\r
+ * \endcode\r
* @brief This API is used to calculate the maximum delay in milliseconds required for the\r
* temperature/pressure/humidity(which ever are enabled) measurement to complete.\r
* The delay depends upon the number of sensors enabled and their oversampling configuration.\r
* @param[in] settings : contains the oversampling configurations.\r
*\r
* @return delay required in milliseconds.\r
+ *\r
*/\r
-\r
uint32_t bme280_cal_meas_delay(const struct bme280_settings *settings);\r
\r
#ifdef __cplusplus\r
projects / BME280_driver / blobdiff