ARM: dts: qcom: sdx65: move status properties to end of nodes

Move a few device tree "status" properties so that they are the last
specified property, in "qcom-sdx65-mtp.dts" and "qcom-sdx65.dtsi".
Note that properties must always be specified before sub-nodes.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327195605.2854123-3-elder@linaro.org

diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index 72e25de0db5fc84944c53532accd65358523a7e9..57bc3b03d3aacfd6e0b6c892c3b1c8e635527f2e 100644 (file)
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -270,8 +270,8 @@ nand@0 {
 };
 
 &remoteproc_mpss {
-       status = "okay";
        memory-region = <&mpss_adsp_mem>;
+       status = "okay";
 };
 
 &usb {
@@ -283,14 +283,14 @@ &usb_dwc3 {
 };
 
 &usb_hsphy {
-       status = "okay";
        vdda-pll-supply = <&vreg_l4b_0p88>;
        vdda33-supply = <&vreg_l10b_3p08>;
        vdda18-supply = <&vreg_l5b_1p8>;
+       status = "okay";
 };
 
 &usb_qmpphy {
-       status = "okay";
        vdda-phy-supply = <&vreg_l4b_0p88>;
        vdda-pll-supply = <&vreg_l1b_1p2>;
+       status = "okay";
 };

diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index 74671cc12c8843261f84e638574caab1eba46dcf..525dd8a1f664952910c6f0ea54a704d9b2d84222 100644 (file)
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -224,16 +224,15 @@ usb_hsphy: phy@ff4000 {
                                     "qcom,usb-snps-hs-7nm-phy";
                        reg = <0xff4000 0x120>;
                        #phy-cells = <0>;
-                       status = "disabled";
                        clocks = <&rpmhcc RPMH_CXO_CLK>;
                        clock-names = "ref";
                        resets = <&gcc GCC_QUSB2PHY_BCR>;
+                       status = "disabled";
                };
 
                usb_qmpphy: phy@ff6000 {
                        compatible = "qcom,sdx65-qmp-usb3-uni-phy";
                        reg = <0x00ff6000 0x1c8>;
-                       status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <1>;
                        ranges;
@@ -247,6 +246,8 @@ usb_qmpphy: phy@ff6000 {
                                 <&gcc GCC_USB3_PHY_BCR>;
                        reset-names = "phy", "common";
 
+                       status = "disabled";
+
                        usb_ssphy: phy@ff6200 {
                                reg = <0x00ff6e00 0x160>,
                                      <0x00ff7000 0x1ec>,
@@ -394,7 +395,6 @@ mem_noc: interconnect@9680000 {
                usb: usb@a6f8800 {
                        compatible = "qcom,sdx65-dwc3", "qcom,dwc3";
                        reg = <0x0a6f8800 0x400>;
-                       status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <1>;
                        ranges;
@@ -424,6 +424,8 @@ usb: usb@a6f8800 {
 
                        resets = <&gcc GCC_USB30_BCR>;
 
+                       status = "disabled";
+
                        usb_dwc3: usb@a600000 {
                                compatible = "snps,dwc3";
                                reg = <0x0a600000 0xcd00>;