Masahiro Yamada [Tue, 19 Dec 2023 18:19:56 +0000 (03:19 +0900)]
kbuild: deb-pkg: hard-code Build-Depends
The condition to require libelf-dev:native is stale because objtool is
now enabled by CONFIG_OBJTOOL instead of CONFIG_UNWINDER_ORC. Not only
objtool but also resolve_btfids requires libelf-dev:native; therefore,
CONFIG_DEBUG_INFO_BTF should be checked as well.
Similarly, CONFIG_SYSTEM_TRUSTED_KEYRING is not the only case that
requires libssl-dev:native.
Perhaps, the following code would provide better coverage, but it is
hard to maintain (and may still be imperfect).
if is_enabled CONFIG_OBJTOOL ||
is_enabled CONFIG_DEBUG_INFO_BTF; then
build_depends="${build_depends}, libelf-dev:native"
fi
if is_enabled CONFIG_SYSTEM_TRUSTED_KEYRING ||
is_enabled CONFIG_SYSTEM_REVOCATION_LIST ||
is_enabled CONFIG_MODULE_SIG_FORMAT; then
build_depends="${build_depends}, libssl-dev:native"
fi
Let's hard-code the build dependency.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
Dmitry Safonov [Wed, 20 Dec 2023 00:33:15 +0000 (00:33 +0000)]
gen_init_cpio: Apply mtime supplied by user to all file types
Currently gen_init_cpio -d <timestamp> is applied to symlinks,
directories and special files. These files are created by
gen_init_cpio from their description. Without <timestamp> option
current time(NULL) is used. And regular files that go in initramfs
are created before cpio generation, so their mtime(s) are preserved.
This is usually not an issue as reproducible builds should rebuild
everything in the distribution, including binaries, configs and whatever
other regular files may find their way into kernel's initramfs.
On the other hand, gen_initramfs.sh usage claims:
> -d <date> Use date for all file mtime values
Ar Arista initramfs files are managed with version control system
that preserves mtime. Those are configs, boot parameters, init scripts,
version files, platform-specific files, probably some others, too.
While it's certainly possible to work this around by copying the file
into temp directory and adjusting mtime prior to gen_init_cpio call,
I don't see why it needs workarounds.
The intended user of -d <date> option is the one that needs to create
a reproducible build, see commit a8b8017c34fe ("initramfs: Use
KBUILD_BUILD_TIMESTAMP for generated entries"). If a user wants
the build reproduction, they use -d <date>, which can be set on all
types of files, without surprising exceptions and workarounds.
Let's KISS here and just apply the time that user specified
with -d option.
'make O=/tmp/a/b/.. defconfig' creates the kernel configuration in
/tmp/a instead of /tmp/x despite /tmp/a/b/.. resolves to /tmp/x.
This is because Kbuild internally uses the 'cd ... && pwd' for the
path resolution, but this behavior is not predictable for users.
Additionally, it is not consistent with how the Kbuild handles the
M= option or GNU Make works with 'make -C /tmp/a/b/..'.
Using the physical directory structure for the O= option seems more
reasonable.
The comment says "expand a shell special character '~'", but it has
already been expanded to the home directory in the command line.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
John Moon [Tue, 12 Dec 2023 02:02:57 +0000 (18:02 -0800)]
check-uapi: Introduce check-uapi.sh
While the kernel community has been good at maintaining backwards
compatibility with kernel UAPIs, it would be helpful to have a tool
to check if a commit introduces changes that break backwards
compatibility.
To that end, introduce check-uapi.sh: a simple shell script that
checks for changes to UAPI headers using libabigail.
libabigail is "a framework which aims at helping developers and
software distributors to spot some ABI-related issues like interface
incompatibility in ELF shared libraries by performing a static
analysis of the ELF binaries at hand."
The script uses one of libabigail's tools, "abidiff", to compile the
changed header before and after the commit to detect any changes.
abidiff "compares the ABI of two shared libraries in ELF format. It
emits a meaningful report describing the differences between the two
ABIs."
The script also includes the ability to check the compatibility of
all UAPI headers across commits. This allows developers to inspect
the stability of the UAPIs over time.
Signed-off-by: John Moon <quic_johmoo@quicinc.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Leonardo Bras [Mon, 11 Dec 2023 22:13:36 +0000 (19:13 -0300)]
scripts: Introduce a default git.orderFile
When reviewing patches, it looks much nicer to have some changes shown
before others, which allow better understanding of the patch before the
the .c files reviewing.
Introduce a default git.orderFile, in order to help developers getting the
best ordering easier.
Signed-off-by: Leonardo Bras <leobras@redhat.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Íñigo Huguet [Thu, 1 Jun 2023 07:53:33 +0000 (09:53 +0200)]
Add .editorconfig file for basic formatting
EditorConfig is a specification to define the most basic code formatting
stuff, and it's supported by many editors and IDEs, either directly or
via plugins, including VSCode/VSCodium, Vim, emacs and more.
It allows to define formatting style related to indentation, charset,
end of lines and trailing whitespaces. It also allows to apply different
formats for different files based on wildcards, so for example it is
possible to apply different configs to *.{c,h}, *.py and *.rs.
In linux project, defining a .editorconfig might help to those people
that work on different projects with different indentation styles, so
they cannot define a global style. Now they will directly see the
correct indentation on every fresh clone of the project.
See https://editorconfig.org
Co-developed-by: Danny Lin <danny@kdrag0n.dev> Signed-off-by: Danny Lin <danny@kdrag0n.dev> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Mickaël Salaün <mic@digikod.net> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Tested-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Sun, 3 Dec 2023 10:25:25 +0000 (19:25 +0900)]
kconfig: squash menu_has_help() and menu_get_help()
menu_has_help() and menu_get_help() functions are only used within
menu_get_ext_help().
Squash them into menu_get_ext_help(). It revealed the if-conditional
in menu_get_help() was unneeded, as menu_has_help() has already checked
that menu->help is not NULL.
Masahiro Yamada [Sun, 3 Dec 2023 10:14:16 +0000 (19:14 +0900)]
sparc: vdso: clean up build artifacts in arch/sparc/vdso/
Currently, vdso-image-*.c, vdso*.so, vdso*.so.dbg are not cleaned
because 'make clean' does not include include/config/auto.conf,
resulting in $(vdso_img-y) being empty.
Add the build artifacts to 'targets' unconditionally.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org>
Masahiro Yamada [Sun, 3 Dec 2023 09:49:34 +0000 (18:49 +0900)]
modpost: remove unreachable code after fatal()
Now compilers can recognize fatal() never returns.
While GCC 4.5 dropped support for -Wunreachable-code, Clang is capable
of detecting the unreachable code.
$ make HOSTCC=clang HOSTCFLAGS=-Wunreachable-code-return
[snip]
HOSTCC scripts/mod/modpost.o
scripts/mod/modpost.c:520:11: warning: 'return' will never be executed [-Wunreachable-code-return]
return 0;
^
scripts/mod/modpost.c:477:10: warning: 'return' will never be executed [-Wunreachable-code-return]
return 0;
^
2 warnings generated.
Masahiro Yamada [Sun, 26 Nov 2023 07:19:14 +0000 (16:19 +0900)]
init: move THIS_MODULE from <linux/export.h> to <linux/init.h>
Commit f50169324df4 ("module.h: split out the EXPORT_SYMBOL into
export.h") appropriately separated EXPORT_SYMBOL into <linux/export.h>
because modules and EXPORT_SYMBOL are orthogonal; modules are symbol
consumers, while EXPORT_SYMBOL are used by symbol providers, which
may not be necessarily a module.
However, that commit also relocated THIS_MODULE. As explained in the
commit description, the intention was to define THIS_MODULE in a
lightweight header, but I do not believe <linux/export.h> was the
best location because EXPORT_SYMBOL and THIS_MODULE are unrelated.
Move it to another lightweight header, <linux/init.h>. The reason for
choosing <linux/init.h> is to make <linux/moduleparam.h> self-contained
without relying on <linux/linkage.h> incorrectly including
<linux/export.h>.
With this adjustment, the role of <linux/export.h> becomes clearer as
it only defines EXPORT_SYMBOL.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Petr Vorel [Tue, 21 Nov 2023 11:58:55 +0000 (12:58 +0100)]
kbuild: buildtar: always make modules_install
It is done for the same reasons as 4243afdb9326 does it for builddeb:
always runs make modules to install modules.builtin* files, which are
needed for e.g. initramfs-tools or LTP testing tool.
Signed-off-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Petr Vorel [Tue, 21 Nov 2023 11:58:54 +0000 (12:58 +0100)]
kbuild: buildtar: Remove unused $dirs
The shell variable $dirs is not used any more since 1fc9095846cc
("kbuild: tar-pkg: use tar rules in scripts/Makefile.package"),
therefore remove it".
Fixes: 1fc9095846cc ("kbuild: tar-pkg: use tar rules in scripts/Makefile.package") Signed-off-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Sat, 18 Nov 2023 07:59:11 +0000 (16:59 +0900)]
kconfig: require an exact match for "is not set" to disable CONFIG option
Currently, any string starting "is not set" disables a CONFIG option.
For example, "# CONFIG_FOO is not settled down" is accepted as valid
input, functioning the same as "# CONFIG_FOO is not set". It is a
long-standing oddity.
Check the line against the exact pattern "is not set".
Masahiro Yamada [Sat, 18 Nov 2023 07:59:09 +0000 (16:59 +0900)]
kconfig: deduplicate code in conf_read_simple()
Kconfig accepts both "# CONFIG_FOO is not set" and "CONFIG_FOO=n" as
a valid input, but conf_read_simple() duplicates similar code to handle
them. Factor out the common code.
Masahiro Yamada [Sat, 18 Nov 2023 07:59:07 +0000 (16:59 +0900)]
kconfig: require a space after '#' for valid input
Currently, when an input line starts with '#', (line + 2) is passed to
memcmp() without checking line[1].
It means that line[1] can be any arbitrary character. For example,
"#KCONFIG_FOO is not set" is accepted as valid input, functioning the
same as "# CONFIG_FOO is not set".
More importantly, this can potentially lead to a buffer overrun if
line[1] == '\0'. It occurs if the input only contains '#', as
(line + 2) points to an uninitialized buffer.
Check line[1], and skip the line if it is not a space.
Dmitrii Bundin [Sun, 5 Nov 2023 21:56:22 +0000 (00:56 +0300)]
kbuild: deb-pkg: apply short -R and -j options
The long version --rules-file and --jobs are available since 1.18.8
while their short analogues -R and -j have been added since 1.14.7.
The option --rules-file the way it works currently was introduced in the
commit 5cd52673aabdf5eaa58181972119a41041fc85f2 of dpkg dated 23.07.18
with the following changelog entry:
* Fix dpkg-buildpackage option --rules-file parsing. It was trying to parse
it as --rules-target, which due to the ordering was a no-op.
The current behavior of the long version --rules-file is guaranteed to
be in use starting 1.19.1 and might cause build failures for some
versions newer than 1.18.8 even in spite of being documented that way.
Masahiro Yamada [Sun, 5 Nov 2023 18:10:47 +0000 (03:10 +0900)]
kconfig: do not clear SYMBOL_DEF_USER when the value is out of range
When a user-supplied value is out of range, (NEW) and an incorrect default
value are shown.
[Test Kconfig]
config FOO
int "foo"
range 10 20
[Test .config]
CONFIG_FOO=30
[Result without this fix]
$ make config
*
* Main menu
*
foo (FOO) [10] (NEW)
[Result with this fix]
$ make config
*
* Main menu
*
foo (FOO) [20]
Currently, the SYMBOL_DEF_USER is cleared if the user input does not
reside within the range. Kconfig forgets the initial value 30, and
prints (NEW) and an incorrect default [10].
Kconfig should remember the user's input. The default should be [20]
because the user's input, 30, is closer to the upper limit of the range.
Please note it will not show up in "make oldconfig" because it is no
longer considered as a new symbol. It also fixes the inconsistent
behavior in listnewconfig/helpnewconfig.
Linus Torvalds [Mon, 27 Nov 2023 03:48:20 +0000 (19:48 -0800)]
Merge tag 'trace-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt::
"Eventfs fixes:
- With the usage of simple_recursive_remove() recommended by Al Viro,
the code should not be calling "d_invalidate()" itself. Doing so is
causing crashes. The code was calling d_invalidate() on the race of
trying to look up a file while the parent was being deleted. This
was detected, and the added dentry was having d_invalidate() called
on it, but the deletion of the directory was also calling
d_invalidate() on that same dentry.
- A fix to not free the eventfs_inode (ei) until the last dput() was
called on its ei->dentry made the ei->dentry exist even after it
was marked for free by setting the ei->is_freed. But code elsewhere
still was checking if ei->dentry was NULL if ei->is_freed is set
and would trigger WARN_ON if that was the case. That's no longer
true and there should not be any warnings when it is true.
- Use GFP_NOFS for allocations done under eventfs_mutex. The
eventfs_mutex can be taken on file system reclaim, make sure that
allocations done under that mutex do not trigger file system
reclaim.
- Clean up code by moving the taking of inode_lock out of the helper
functions and into where they are needed, and not use the parameter
to know to take it or not. It must always be held but some callers
of the helper function have it taken when they were called.
- Warn if the inode_lock is not held in the helper functions.
- Warn if eventfs_start_creating() is called without a parent. As
eventfs is underneath tracefs, all files created will have a parent
(the top one will have a tracefs parent).
Tracing update:
- Add Mathieu Desnoyers as an official reviewer of the tracing subsystem"
* tag 'trace-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
MAINTAINERS: TRACING: Add Mathieu Desnoyers as Reviewer
eventfs: Make sure that parent->d_inode is locked in creating files/dirs
eventfs: Do not allow NULL parent to eventfs_start_creating()
eventfs: Move taking of inode_lock into dcache_dir_open_wrapper()
eventfs: Use GFP_NOFS for allocation when eventfs_mutex is held
eventfs: Do not invalidate dentry in create_file/dir_dentry()
eventfs: Remove expectation that ei->is_freed means ei->dentry == NULL
Linus Torvalds [Sun, 26 Nov 2023 17:59:39 +0000 (09:59 -0800)]
Merge tag 'parisc-for-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"This patchset fixes and enforces correct section alignments for the
ex_table, altinstructions, parisc_unwind, jump_table and bug_table
which are created by inline assembly.
Due to not being correctly aligned at link & load time they can
trigger unnecessarily the kernel unaligned exception handler at
runtime. While at it, I switched the bug table to use relative
addresses which reduces the size of the table by half on 64-bit.
We still had the ENOSYM and EREMOTERELEASE errno symbols as left-overs
from HP-UX, which now trigger build-issues with glibc. We can simply
remove them.
Most of the patches are tagged for stable kernel series.
Summary:
- Drop HP-UX ENOSYM and EREMOTERELEASE return codes to avoid glibc
build issues
- Fix section alignments for ex_table, altinstructions, parisc unwind
table, jump_table and bug_table
- Reduce size of bug_table on 64-bit kernel by using relative
pointers"
* tag 'parisc-for-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Reduce size of the bug_table on 64-bit kernel by half
parisc: Drop the HP-UX ENOSYM and EREMOTERELEASE error codes
parisc: Use natural CPU alignment for bug_table
parisc: Ensure 32-bit alignment on parisc unwind section
parisc: Mark lock_aligned variables 16-byte aligned on SMP
parisc: Mark jump_table naturally aligned
parisc: Mark altinstructions read-only and 32-bit aligned
parisc: Mark ex_table entries 32-bit aligned in uaccess.h
parisc: Mark ex_table entries 32-bit aligned in assembly.h
Linus Torvalds [Sun, 26 Nov 2023 16:42:42 +0000 (08:42 -0800)]
Merge tag 'x86-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode fixes from Ingo Molnar:
"Fix/enhance x86 microcode version reporting: fix the bootup log spam,
and remove the driver version announcement to avoid version confusion
when distros backport fixes"
* tag 'x86-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Rework early revisions reporting
x86/microcode: Remove the driver announcement and version
Linus Torvalds [Sun, 26 Nov 2023 16:34:12 +0000 (08:34 -0800)]
Merge tag 'perf-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf event fix from Ingo Molnar:
"Fix a bug in the Intel hybrid CPUs hardware-capabilities enumeration
code resulting in non-working events on those platforms"
* tag 'perf-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Correct incorrect 'or' operation for PMU capabilities
Linus Torvalds [Sun, 26 Nov 2023 16:22:27 +0000 (08:22 -0800)]
Merge tag '6.7-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- use after free fix in releasing multichannel interfaces
- fixes for special file types (report char, block, FIFOs properly when
created e.g. by NFS to Windows)
- fixes for reporting various special file types and symlinks properly
when using SMB1
* tag '6.7-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: introduce cifs_sfu_make_node()
smb: client: set correct file type from NFS reparse points
smb: client: introduce ->parse_reparse_point()
smb: client: implement ->query_reparse_point() for SMB1
cifs: fix use after free for iface while disabling secondary channels
Linus Torvalds [Sun, 26 Nov 2023 02:22:42 +0000 (18:22 -0800)]
Merge tag 'usb-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / PHY / Thunderbolt fixes from Greg KH:
"Here are a number of reverts, fixes, and new device ids for 6.7-rc3
for the USB, PHY, and Thunderbolt driver subsystems. Include in here
are:
- reverts of some PHY drivers that went into 6.7-rc1 that shouldn't
have been merged yet, the author is reworking them based on review
comments as they were using older apis that shouldn't be used
anymore for newer drivers
- small thunderbolt driver fixes for reported issues
- USB driver fixes for a variety of small issues in dwc3, typec,
xhci, and other smaller drivers.
- new device ids for usb-serial and onboard_usb_hub drivers.
All of these have been in linux-next with no reported issues"
* tag 'usb-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
USB: serial: option: add Luat Air72*U series products
USB: dwc3: qcom: fix ACPI platform device leak
USB: dwc3: qcom: fix software node leak on probe errors
USB: dwc3: qcom: fix resource leaks on probe deferral
USB: dwc3: qcom: simplify wakeup interrupt setup
USB: dwc3: qcom: fix wakeup after probe deferral
dt-bindings: usb: qcom,dwc3: fix example wakeup interrupt types
usb: misc: onboard-hub: add support for Microchip USB5744
dt-bindings: usb: microchip,usb5744: Add second supply
usb: misc: ljca: Fix enumeration error on Dell Latitude 9420
USB: serial: option: add Fibocom L7xx modules
USB: xhci-plat: fix legacy PHY double init
usb: typec: tipd: Supply also I2C driver data
usb: xhci-mtk: fix in-ep's start-split check failure
usb: dwc3: set the dma max_seg_size
usb: config: fix iteration issue in 'usb_get_bos_descriptor()'
usb: dwc3: add missing of_node_put and platform_device_put
USB: dwc2: write HCINT with INTMASK applied
usb: misc: ljca: Drop _ADR support to get ljca children devices
usb: cdnsp: Fix deadlock issue during using NCM gadget
...
Linus Torvalds [Sat, 25 Nov 2023 16:57:09 +0000 (08:57 -0800)]
Merge tag 'xfs-6.7-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Chandan Babu:
- Validate quota records recovered from the log before writing them to
the disk.
* tag 'xfs-6.7-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: dquot recovery does not validate the recovered dquot
xfs: clean up dqblk extraction
Linus Torvalds [Sat, 25 Nov 2023 16:43:46 +0000 (08:43 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix "rodata=on" not disabling "rodata=full" on arm64
- Add arm64 make dependency between vmlinuz.efi and Image, leading to
occasional build failures previously (with parallel building)
- Add newline to the output formatting of the za-fork kselftest
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: add dependency between vmlinuz.efi and Image
kselftest/arm64: Fix output formatting for za-fork
arm64: mm: Fix "rodata=on" when CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
Linus Torvalds [Sat, 25 Nov 2023 16:32:44 +0000 (08:32 -0800)]
Merge tag 'for-linus-6.7a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A small cleanup patch for the Xen privcmd driver
- A fix for the swiotlb-xen driver which was missing the advertising of
the maximum mapping length
- A fix for Xen on Arm for a longstanding bug, which happened to occur
only recently: a structure in percpu memory crossed a page boundary,
which was rejected by the hypervisor
* tag 'for-linus-6.7a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
arm/xen: fix xen_vcpu_info allocation alignment
xen: privcmd: Replace zero-length array with flex-array member and use __counted_by
swiotlb-xen: provide the "max_mapping_size" method
Helge Deller [Thu, 23 Nov 2023 20:57:19 +0000 (21:57 +0100)]
parisc: Reduce size of the bug_table on 64-bit kernel by half
Enable GENERIC_BUG_RELATIVE_POINTERS which will store 32-bit relative
offsets to the bug address and the source file name instead of 64-bit
absolute addresses. This effectively reduces the size of the
bug_table[] array by half on 64-bit kernels.
Helge Deller [Thu, 23 Nov 2023 19:28:27 +0000 (20:28 +0100)]
parisc: Drop the HP-UX ENOSYM and EREMOTERELEASE error codes
Those return codes are only defined for the parisc architecture and
are leftovers from when we wanted to be HP-UX compatible.
They are not returned by any Linux kernel syscall but do trigger
problems with the glibc strerrorname_np() and strerror() functions as
reported in glibc issue #31080.
There is no need to keep them, so simply remove them.
Helge Deller [Mon, 20 Nov 2023 22:30:49 +0000 (23:30 +0100)]
parisc: Use natural CPU alignment for bug_table
Make sure that the __bug_table section gets 32- or 64-bit aligned,
depending if a 32- or 64-bit kernel is being built.
Mark it non-writeable and use .blockz instead of the .org assembler
directive to pad the struct.
Helge Deller [Sat, 25 Nov 2023 08:11:56 +0000 (09:11 +0100)]
parisc: Mark lock_aligned variables 16-byte aligned on SMP
On parisc we need 16-byte alignment for variables which are used for
locking. Mark the __lock_aligned attribute acordingly so that the
.data..lock_aligned section will get that alignment in the generated
object files.
Helge Deller [Mon, 20 Nov 2023 22:14:39 +0000 (23:14 +0100)]
parisc: Mark jump_table naturally aligned
The jump_table stores two 32-bit words and one 32- (on 32-bit kernel)
or one 64-bit word (on 64-bit kernel).
Ensure that the last word is always 64-bit aligned on a 64-bit kernel
by aligning the whole structure on sizeof(long).
Helge Deller [Mon, 20 Nov 2023 14:39:03 +0000 (15:39 +0100)]
parisc: Mark ex_table entries 32-bit aligned in uaccess.h
Add an align statement to tell the linker that all ex_table entries and as
such the whole ex_table section should be 32-bit aligned in vmlinux and modules.
Helge Deller [Mon, 20 Nov 2023 14:37:50 +0000 (15:37 +0100)]
parisc: Mark ex_table entries 32-bit aligned in assembly.h
Add an align statement to tell the linker that all ex_table entries and as
such the whole ex_table section should be 32-bit aligned in vmlinux and modules.
Linus Torvalds [Fri, 24 Nov 2023 19:44:50 +0000 (11:44 -0800)]
Merge tag 's390-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Remove unnecessary assignment of the performance event last_tag.
- Create missing /sys/firmware/ipl/* attributes when kernel is booted
in dump mode using List-directed ECKD IPL.
- Remove odd comment.
- Fix s390-specific part of scripts/checkstack.pl script that only
matches three-digit numbers starting with 3 or any higher number and
skips any stack sizes smaller than 304 bytes.
* tag 's390-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
scripts/checkstack.pl: match all stack sizes for s390
s390: remove odd comment
s390/ipl: add missing IPL_TYPE_ECKD_DUMP case to ipl_init()
s390/pai: cleanup event initialization
Linus Torvalds [Fri, 24 Nov 2023 19:30:35 +0000 (11:30 -0800)]
Merge tag 'acpi-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These add an ACPI IRQ override quirk for ASUS ExpertBook B1402CVA and
fix an ACPI processor idle issue leading to triple-faults in Xen HVM
guests and an ACPI backlight driver issue that causes GPUs to
misbehave while their children power is being fixed up.
Specifics:
- Avoid powering up GPUs while attempting to fix up power for their
children (Hans de Goede)
- Use raw_safe_halt() instead of safe_halt() in acpi_idle_play_dead()
so as to avoid triple-falts during CPU online in Xen HVM guests due
to the setting of the hardirqs_enabled flag in safe_halt() (David
Woodhouse)
- Add an ACPI IRQ override quirk for ASUS ExpertBook B1402CVA (Hans
de Goede)"
* tag 'acpi-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CVA
ACPI: video: Use acpi_device_fix_up_power_children()
ACPI: PM: Add acpi_device_fix_up_power_children() function
ACPI: processor_idle: use raw_safe_halt() in acpi_idle_play_dead()
Linus Torvalds [Fri, 24 Nov 2023 19:26:00 +0000 (11:26 -0800)]
Merge tag 'pm-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a syntax error in the sleepgraph utility which causes it to exit
early on every invocation (David Woodhouse)"
* tag 'pm-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: tools: Fix sleepgraph syntax error
Linus Torvalds [Fri, 24 Nov 2023 18:40:03 +0000 (10:40 -0800)]
Merge tag 'afs-fixes-20231124' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
- Fix the afs_server_list struct to be cleaned up with RCU
- Fix afs to translate a no-data result from a DNS lookup into ENOENT,
not EDESTADDRREQ for consistency with OpenAFS
- Fix afs to translate a negative DNS lookup result into ENOENT rather
than EDESTADDRREQ
- Fix file locking on R/O volumes to operate in local mode as the
server doesn't handle exclusive locks on such files
- Set SB_RDONLY on superblocks for RO and Backup volumes so that the
VFS can see that they're read only
* tag 'afs-fixes-20231124' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Mark a superblock for an R/O or Backup volume as SB_RDONLY
afs: Fix file locking on R/O volumes to operate in local mode
afs: Return ENOENT if no cell DNS record can be found
afs: Make error on cell lookup failure consistent with OpenAFS
afs: Fix afs_server_list to be cleaned up with RCU
Merge branches 'acpi-video' and 'acpi-processor' into acpi
Merge ACPI backlight driver fixes and an ACPI processor driver fix for
6.7-rc3:
- Avoid powering up GPUs while attempting to fix up power for their
children (Hans de Goede).
- Use raw_safe_halt() instead of safe_halt() in acpi_idle_play_dead()
so as to avoid triple-falts during CPU online in Xen HVM guests due
to the setting of the hardirqs_enabled flag in safe_halt() (David
Woodhouse).
* acpi-video:
ACPI: video: Use acpi_device_fix_up_power_children()
ACPI: PM: Add acpi_device_fix_up_power_children() function
* acpi-processor:
ACPI: processor_idle: use raw_safe_halt() in acpi_idle_play_dead()
Linus Torvalds [Fri, 24 Nov 2023 17:45:40 +0000 (09:45 -0800)]
Merge tag 'vfs-6.7-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Avoid calling back into LSMs from vfs_getattr_nosec() calls.
IMA used to query inode properties accessing raw inode fields without
dedicated helpers. That was finally fixed a few releases ago by
forcing IMA to use vfs_getattr_nosec() helpers.
The goal of the vfs_getattr_nosec() helper is to query for attributes
without calling into the LSM layer which would be quite problematic
because incredibly IMA is called from __fput()...
__fput()
-> ima_file_free()
What it does is to call back into the filesystem to update the file's
IMA xattr. Querying the inode without using vfs_getattr_nosec() meant
that IMA didn't handle stacking filesystems such as overlayfs
correctly. So the switch to vfs_getattr_nosec() is quite correct. But
the switch to vfs_getattr_nosec() revealed another bug when used on
stacking filesystems:
__fput()
-> ima_file_free()
-> vfs_getattr_nosec()
-> i_op->getattr::ovl_getattr()
-> vfs_getattr()
-> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr()
-> security_inode_getattr() # calls back into LSMs
Now, if that __fput() happens from task_work_run() of an exiting task
current->fs and various other pointer could already be NULL. So
anything in the LSM layer relying on that not being NULL would be
quite surprised.
Fix that by passing the information that this is a security request
through to the stacking filesystem by adding a new internal
ATT_GETATTR_NOSEC flag. Now the callchain becomes:
- Fix a bug introduced with the iov_iter rework from last cycle.
This broke /proc/kcore by copying too much and without the correct
offset.
- Add a missing NULL check when allocating the root inode in
autofs_fill_super().
- Fix stable writes for multi-device filesystems (xfs, btrfs etc) and
the block device pseudo filesystem.
Stable writes used to be a superblock flag only, making it a per
filesystem property. Add an additional AS_STABLE_WRITES mapping flag
to allow for fine-grained control.
- Ensure that offset_iterate_dir() returns 0 after reaching the end of
a directory so it adheres to getdents() convention.
* tag 'vfs-6.7-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
libfs: getdents() should return 0 after reaching EOD
xfs: respect the stable writes flag on the RT device
xfs: clean up FS_XFLAG_REALTIME handling in xfs_ioctl_setattr_xflags
block: update the stable_writes flag in bdev_add
filemap: add a per-mapping stable writes flag
autofs: add: new_inode check in autofs_fill_super()
iov_iter: fix copy_page_to_iter_nofault()
fs: Pass AT_GETATTR_NOSEC flag to getattr interface function
Linus Torvalds [Fri, 24 Nov 2023 17:36:33 +0000 (09:36 -0800)]
Merge tag 'drm-fixes-2023-11-24' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Back to regular scheduled fixes pull request, mainly a bunch of msm,
some i915 and otherwise a few scattered, one memory crasher in the
nouveau GSP paths is helping stabilise that work.
msm:
- Fix the VREG_CTRL_1 for 4nm CPHY to match downstream
- Remove duplicate call to drm_kms_helper_poll_init() in
msm_drm_init()
- Fix the safe_lut_tbl[] for sc8280xp to match downstream
- Don't attach the drm_dp_set_subconnector_property() for eDP
- Fix to attach drm_dp_set_subconnector_property() for DP. Otherwise
there is a bootup crash on multiple targets
- Remove unnecessary NULL check left behind during cleanup
i915:
- Fix race between DP MST connectore registration and setup
- Fix GT memory leak on probe error path
panel:
- Fixes for innolux and auo,b101uan08.3 panel.
- Fix Himax83102-j02 timings.
ivpu:
- Fix ivpu MMIO reset.
ast:
- AST fix on connetor disconnection.
nouveau:
- gsp memory corruption fix
rockchip:
- color fix"
* tag 'drm-fixes-2023-11-24' of git://anongit.freedesktop.org/drm/drm:
nouveau/gsp: allocate enough space for all channel ids.
drm/panel: boe-tv101wum-nl6: Fine tune Himax83102-j02 panel HFP and HBP
drm/ast: Disconnect BMC if physical connector is connected
accel/ivpu/37xx: Fix hangs related to MMIO reset
drm/rockchip: vop: Fix color for RGB888/BGR888 format on VOP full
drm/i915: do not clean GT table on error path
drm/i915/dp_mst: Fix race between connector registration and setup
drm/panel: simple: Fix Innolux G101ICE-L01 timings
drm/panel: simple: Fix Innolux G101ICE-L01 bus flags
drm/msm: remove unnecessary NULL check
drm/panel: auo,b101uan08.3: Fine tune the panel power sequence
drm/msm/dp: attach the DP subconnector property
drm/msm/dp: don't touch DP subconnector property in eDP case
drm/msm/dpu: Add missing safe_lut_tbl in sc8280xp catalog
drm/msm: remove exra drm_kms_helper_poll_init() call
drm/msm/dsi: use the correct VREG_CTRL_1 value for 4nm cphy
David Howells [Wed, 1 Nov 2023 22:03:28 +0000 (22:03 +0000)]
afs: Fix file locking on R/O volumes to operate in local mode
AFS doesn't really do locking on R/O volumes as fileservers don't maintain
state with each other and thus a lock on a R/O volume file on one
fileserver will not be be visible to someone looking at the same file on
another fileserver.
Further, the server may return an error if you try it.
Fix this by doing what other AFS clients do and handle filelocking on R/O
volume files entirely within the client and don't touch the server.
Fixes: 6c6c1d63c243 ("afs: Provide mount-time configurable byte-range file locking emulation") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Peter Zijlstra [Tue, 21 Nov 2023 11:41:26 +0000 (12:41 +0100)]
lockdep: Fix block chain corruption
Kent reported an occasional KASAN splat in lockdep. Mark then noted:
> I suspect the dodgy access is to chain_block_buckets[-1], which hits the last 4
> bytes of the redzone and gets (incorrectly/misleadingly) attributed to
> nr_large_chain_blocks.
That would mean @size == 0, at which point size_to_bucket() returns -1
and the above happens.
alloc_chain_hlocks() has 'size - req', for the first with the
precondition 'size >= rq', which allows the 0.
This code is trying to split a block, del_chain_block() takes what we
need, and add_chain_block() puts back the remainder, except in the
above case the remainder is 0 sized and things go sideways.
Fixes: 810507fe6fd5 ("locking/lockdep: Reuse freed chain_hlocks entries") Reported-by: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Kent Overstreet <kent.overstreet@linux.dev> Link: https://lkml.kernel.org/r/20231121114126.GH8262@noisy.programming.kicks-ass.net
- MD pull request via Song, fixing a raid5 corruption issue
- Disentanglement of the dependency mess in nvme introduced with the
tls additions. Now it should actually build on all configs (Arnd)
- Series of bcache fixes (Coly)
- Removal of a dead helper (Damien)
- s390 dasd fix (Muhammad, Jan)
- lockdep blk-cgroup fixes (Ming)"
* tag 'block-6.7-2023-11-23' of git://git.kernel.dk/linux: (33 commits)
nvme: tcp: fix compile-time checks for TLS mode
nvme: target: fix Kconfig select statements
nvme: target: fix nvme_keyring_id() references
nvme: move nvme_stop_keep_alive() back to original position
nbd: pass nbd_sock to nbd_read_reply() instead of index
s390/dasd: protect device queue against concurrent access
s390/dasd: resolve spelling mistake
block/null_blk: Fix double blk_mq_start_request() warning
nvmet-tcp: always initialize tls_handshake_tmo_work
nvmet: nul-terminate the NQNs passed in the connect command
nvme: blank out authentication fabrics options if not configured
nvme: catch errors from nvme_configure_metadata()
nvme-tcp: only evaluate 'tls' option if TLS is selected
nvme-auth: set explanation code for failure2 msgs
nvme-auth: unlock mutex in one place only
block: Remove blk_set_runtime_active()
nbd: fix null-ptr-dereference while accessing 'nbd->config'
nbd: factor out a helper to get nbd_config without holding 'config_lock'
nbd: fold nbd config initialization into nbd_alloc_config()
bcache: avoid NULL checking to c->root in run_cache_set()
...
Linus Torvalds [Fri, 24 Nov 2023 01:36:29 +0000 (17:36 -0800)]
Merge tag 'io_uring-6.7-2023-11-23' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"A fix for ensuring that LINKAT always propagates flags correctly, and
a fix for an off-by-one in segment skipping for registered buffers.
Both heading to stable as well"
* tag 'io_uring-6.7-2023-11-23' of git://git.kernel.dk/linux:
io_uring: fix off-by one bvec index
io_uring/fs: consider link->flags when getting path for LINKAT
Linus Torvalds [Fri, 24 Nov 2023 01:31:53 +0000 (17:31 -0800)]
Merge tag 'for-linus-2023112301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- revert of commit that caused regression to many Logitech unifying
receiver users (Jiri Kosina)
- power management fix for hid-mcp2221 (Hamish Martin)
- fix for race condition between HID core and HID debug (Charles Yi)
- a couple of assorted device-ID-specific quirks
* tag 'for-linus-2023112301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: multitouch: Add quirk for HONOR GLO-GXXX touchpad
HID: hid-asus: reset the backlight brightness level on resume
HID: hid-asus: add const to read-only outgoing usb buffer
Revert "HID: logitech-dj: Add support for a new lightspeed receiver iteration"
HID: add ALWAYS_POLL quirk for Apple kb
HID: glorious: fix Glorious Model I HID report
HID: fix HID device resource race between HID core and debugging support
HID: apple: add Jamesdonkey and A3R to non-apple keyboards list
HID: mcp2221: Allow IO to start during probe
HID: mcp2221: Set driver data before I2C adapter add
Dave Airlie [Fri, 24 Nov 2023 00:37:45 +0000 (10:37 +1000)]
Merge tag 'drm-msm-fixes-2023-11-21' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v6.7-rc3:
- Fix the VREG_CTRL_1 for 4nm CPHY to match downstream
- Remove duplicate call to drm_kms_helper_poll_init() in msm_drm_init()
- Fix the safe_lut_tbl[] for sc8280xp to match downstream
- Don't attach the drm_dp_set_subconnector_property() for eDP
- Fix to attach drm_dp_set_subconnector_property() for DP. Otherwise
there is a bootup crash on multiple targets
- Remove unnecessary NULL check left behind during cleanup
Linus Torvalds [Thu, 23 Nov 2023 18:40:13 +0000 (10:40 -0800)]
Merge tag 'net-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf.
Current release - regressions:
- Revert "net: r8169: Disable multicast filter for RTL8168H and
RTL8107E"
- kselftest: rtnetlink: fix ip route command typo
Current release - new code bugs:
- s390/ism: make sure ism driver implies smc protocol in kconfig
- two build fixes for tools/net
Previous releases - regressions:
- rxrpc: couple of ACK/PING/RTT handling fixes
Previous releases - always broken:
- bpf: verify bpf_loop() callbacks as if they are called unknown
number of times
- improve stability of auto-bonding with Hyper-V
- account BPF-neigh-redirected traffic in interface statistics
Misc:
- net: fill in some more MODULE_DESCRIPTION()s"
* tag 'net-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
tools: ynl: fix duplicate op name in devlink
tools: ynl: fix header path for nfsd
net: ipa: fix one GSI register field width
tls: fix NULL deref on tls_sw_splice_eof() with empty record
net: axienet: Fix check for partial TX checksum
vsock/test: fix SEQPACKET message bounds test
i40e: Fix adding unsupported cloud filters
ice: restore timestamp configuration after device reset
ice: unify logic for programming PFINT_TSYN_MSK
ice: remove ptp_tx ring parameter flag
amd-xgbe: propagate the correct speed and duplex status
amd-xgbe: handle the corner-case during tx completion
amd-xgbe: handle corner-case during sfp hotplug
net: veth: fix ethtool stats reporting
octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF
net: usb: qmi_wwan: claim interface 4 for ZTE MF290
Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E"
net/smc: avoid data corruption caused by decline
nfc: virtual_ncidev: Add variable to check if ndev is running
dpll: Fix potential msg memleak when genlmsg_put_reply failed
...
Ritvik Budhiraja [Tue, 21 Nov 2023 13:43:47 +0000 (19:13 +0530)]
cifs: fix use after free for iface while disabling secondary channels
We were deferencing iface after it has been released. Fix is to
release after all dereference instances have been encountered.
Signed-off-by: Ritvik Budhiraja <rbudhiraja@microsoft.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202311110815.UJaeU3Tt-lkp@intel.com/ Signed-off-by: Steve French <stfrench@microsoft.com>
Jakub Kicinski [Thu, 23 Nov 2023 03:05:58 +0000 (19:05 -0800)]
tools: ynl: fix duplicate op name in devlink
We don't support CRUD-inspired message types in YNL too well.
One aspect that currently trips us up is the fact that single
message ID can be used in multiple commands (as the response).
This leads to duplicate entries in the id-to-string tables:
devlink-user.c:19:34: warning: initialized field overwritten [-Woverride-init]
19 | [DEVLINK_CMD_PORT_NEW] = "port-new",
| ^~~~~~~~~~
devlink-user.c:19:34: note: (near initialization for ‘devlink_op_strmap[7]’)
Fixes tag points at where the code was generated, the "real" problem
is that the code generator does not support CRUD.
Jann Horn [Wed, 22 Nov 2023 21:44:47 +0000 (22:44 +0100)]
tls: fix NULL deref on tls_sw_splice_eof() with empty record
syzkaller discovered that if tls_sw_splice_eof() is executed as part of
sendfile() when the plaintext/ciphertext sk_msg are empty, the send path
gets confused because the empty ciphertext buffer does not have enough
space for the encryption overhead. This causes tls_push_record() to go on
the `split = true` path (which is only supposed to be used when interacting
with an attached BPF program), and then get further confused and hit the
tls_merge_open_record() path, which then assumes that there must be at
least one populated buffer element, leading to a NULL deref.
It is possible to have empty plaintext/ciphertext buffers if we previously
bailed from tls_sw_sendmsg_locked() via the tls_trim_both_msgs() path.
tls_sw_push_pending_record() already handles this case correctly; let's do
the same check in tls_sw_splice_eof().
Fixes: df720d288dbb ("tls/sw: Use splice_eof() to flush") Cc: stable@vger.kernel.org Reported-by: syzbot+40d43509a099ea756317@syzkaller.appspotmail.com Signed-off-by: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/r/20231122214447.675768-1-jannh@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arseniy Krasnov [Tue, 21 Nov 2023 21:16:42 +0000 (00:16 +0300)]
vsock/test: fix SEQPACKET message bounds test
Tune message length calculation to make this test work on machines
where 'getpagesize()' returns >32KB. Now maximum message length is not
hardcoded (on machines above it was smaller than 'getpagesize()' return
value, thus we get negative value and test fails), but calculated at
runtime and always bigger than 'getpagesize()' result. Reproduced on
aarch64 with 64KB page size.
Ivan Vecera [Tue, 21 Nov 2023 21:13:36 +0000 (13:13 -0800)]
i40e: Fix adding unsupported cloud filters
If a VF tries to add unsupported cloud filter through virtchnl
then i40e_add_del_cloud_filter(_big_buf) returns -ENOTSUPP but
this error code is stored in 'ret' instead of 'aq_ret' that
is used as error code sent back to VF. In this scenario where
one of the mentioned functions fails the value of 'aq_ret'
is zero so the VF will incorrectly receive a 'success'.
Use 'aq_ret' to store return value and remove 'ret' local
variable. Additionally fix the issue when filter allocation
fails, in this case no notification is sent back to the VF.
Fixes: e284fc280473 ("i40e: Add and delete cloud filter") Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231121211338.3348677-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
ice: restore timestamp config after reset
Jake Keller says:
We recently discovered during internal validation that the ice driver has
not been properly restoring Tx timestamp configuration after a device reset,
which resulted in application failures after a device reset.
After some digging, it turned out this problem is two-fold. Since the
introduction of the PTP support the driver has been clobbering the storage
of the current timestamp configuration during reset. Thus after a reset, the
driver will no longer perform Tx or Rx timestamps, and will report
timestamp configuration as disabled if SIOCGHWTSTAMP ioctl is issued.
In addition, the recently merged auxiliary bus support code missed that
PFINT_TSYN_MSK must be reprogrammed on the clock owner for E822 devices.
Failure to restore this register configuration results in the driver no
longer responding to interrupts from other ports. Depending on the traffic
pattern, this can either result in increased latency responding to
timestamps on the non-owner ports, or it can result in the driver never
reporting any timestamps. The configuration of PFINT_TSYN_MSK was only done
during initialization. Due to this, the Tx timestamp issue persists even if
userspace reconfigures timestamping.
This series fixes both issues, as well as removes a redundant Tx ring field
since we can rely on the skb flag as the primary detector for a Tx timestamp
request.
Note that I don't think this series will directly apply to older stable
releases (even v6.6) as we recently refactored a lot of the PTP code to
support auxiliary bus. Patch 2/3 only matters for the post-auxiliary bus
implementation. The principle of patch 1/3 and 3/3 could apply as far back
as the initial PTP support, but I don't think it will apply cleanly as-is.
====================
Jacob Keller [Tue, 21 Nov 2023 21:12:57 +0000 (13:12 -0800)]
ice: restore timestamp configuration after device reset
The driver calls ice_ptp_cfg_timestamp() during ice_ptp_prepare_for_reset()
to disable timestamping while the device is resetting. This operation
destroys the user requested configuration. While the driver does call
ice_ptp_cfg_timestamp in ice_rebuild() to restore some hardware settings
after a reset, it unconditionally passes true or false, resulting in
failure to restore previous user space configuration.
This results in a device reset forcibly disabling timestamp configuration
regardless of current user settings.
This was not detected previously due to a quirk of the LinuxPTP ptp4l
application. If ptp4l detects a missing timestamp, it enters a fault state
and performs recovery logic which includes executing SIOCSHWTSTAMP again,
restoring the now accidentally cleared configuration.
Not every application does this, and for these applications, timestamps
will mysteriously stop after a PF reset, without being restored until an
application restart.
Fix this by replacing ice_ptp_cfg_timestamp() with two new functions:
1) ice_ptp_disable_timestamp_mode() which unconditionally disables the
timestamping logic in ice_ptp_prepare_for_reset() and ice_ptp_release()
2) ice_ptp_restore_timestamp_mode() which calls
ice_ptp_restore_tx_interrupt() to restore Tx timestamping configuration,
calls ice_set_rx_tstamp() to restore Rx timestamping configuration, and
issues an immediate TSYN_TX interrupt to ensure that timestamps which
may have occurred during the device reset get processed.
Modify the ice_ptp_set_timestamp_mode to directly save the user
configuration and then call ice_ptp_restore_timestamp_mode. This way, reset
no longer destroys the saved user configuration.
This obsoletes the ice_set_tx_tstamp() function which can now be safely
removed.
With this change, all devices should now restore Tx and Rx timestamping
functionality correctly after a PF reset without application intervention.
Fixes: 77a781155a65 ("ice: enable receive hardware timestamping") Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>