Merge tag 'perf_urgent_for_v6.3_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Fix "same task" check when redirecting event output
- Do not wait unconditionally for RCU on the event migration path if
there are no events to migrate
* tag 'perf_urgent_for_v6.3_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix the same task check in perf_event_set_output
perf: Optimize perf_pmu_migrate_context()
Merge tag 'x86_urgent_for_v6.3_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a new Intel Arrow Lake CPU model number
- Fix a confusion about how to check the version of the ACPI spec which
supports a "online capable" bit in the MADT table which lead to a
bunch of boot breakages with Zen1 systems and VMs
* tag 'x86_urgent_for_v6.3_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add model number for Intel Arrow Lake processor
x86/acpi/boot: Correct acpi_is_processor_usable() check
x86/ACPI/boot: Use FADT version to check support for online capable
Merge tag 'cxl-fixes-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull compute express link (cxl) fixes from Dan Williams:
"Several fixes for driver startup regressions that landed during the
merge window as well as some older bugs.
The regressions were due to a lack of testing with what the CXL
specification calls Restricted CXL Host (RCH) topologies compared to
the testing with Virtual Host (VH) CXL topologies. A VH topology is
typical PCIe while RCH topologies map CXL endpoints as Root Complex
Integrated endpoints. The impact is some driver crashes on startup.
This merge window also added compatibility for range registers (the
mechanism that CXL 1.1 defined for mapping memory) to treat them like
HDM decoders (the mechanism that CXL 2.0 defined for mapping
Host-managed Device Memory). That work collided with the new region
enumeration code that was tested with CXL 2.0 setups, and fails with
crashes at startup.
Lastly, the DOE (Data Object Exchange) implementation for retrieving
an ACPI-like data table from CXL devices is being reworked for v6.4.
Several fixes fell out of that work that are suitable for v6.3.
All of this has been in linux-next for a while, and all reported
issues [1] have been addressed.
Summary:
- Fix several issues with region enumeration in RCH topologies that
can trigger crashes on driver startup or shutdown.
- Fix CXL DVSEC range register compatibility versus region
enumeration that leads to startup crashes
- Fix Data Object Exchange (DOE) workqueue usage vs
CONFIG_DEBUG_OBJECTS warn splats"
Link: http://lore.kernel.org/r/20230405075704.33de8121@canb.auug.org.au
* tag 'cxl-fixes-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/hdm: Extend DVSEC range register emulation for region enumeration
cxl/hdm: Limit emulation to the number of range registers
cxl/region: Move coherence tracking into cxl_region_attach()
cxl/region: Fix region setup/teardown for RCDs
cxl/port: Fix find_cxl_root() for RCDs and simplify it
cxl/hdm: Skip emulation when driver manages mem_enable
cxl/hdm: Fix double allocation of @cxlhdm
PCI/DOE: Fix memory leak with CONFIG_DEBUG_OBJECTS=y
PCI/DOE: Silence WARN splat with CONFIG_DEBUG_OBJECTS=y
cxl/pci: Handle excessive CDAT length
cxl/pci: Handle truncated CDAT entries
cxl/pci: Handle truncated CDAT header
cxl/pci: Fix CDAT retrieval on big endian
Merge tag '6.3-rc5-smb3-cifs-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Two cifs/smb3 client fixes, one for stable:
- double lock fix for a cifs/smb1 reconnect path
- DFS prefixpath fix for reconnect when server moved"
* tag '6.3-rc5-smb3-cifs-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: double lock in cifs_reconnect_tcon()
cifs: sanitize paths in cifs_update_super_prepath.
Merge tag 'char-misc-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a small set of various small driver changes for 6.3-rc6.
Included in here are:
- iio driver fixes for reported problems
- coresight hwtracing bugfix for reported problem
- small counter driver bugfixes
All have been in linux-next for a while with no reported problems"
* tag 'char-misc-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
coresight: etm4x: Do not access TRCIDR1 for identification
coresight-etm4: Fix for() loop drvdata->nr_addr_cmp range bug
iio: adc: ti-ads7950: Set `can_sleep` flag for GPIO chip
iio: adc: palmas_gpadc: fix NULL dereference on rmmod
counter: 104-quad-8: Fix Synapse action reported for Index signals
counter: 104-quad-8: Fix race condition between FLAG and CNTR reads
iio: adc: max11410: fix read_poll_timeout() usage
iio: dac: cio-dac: Fix max DAC write value check for 12-bit
iio: light: cm32181: Unregister second I2C client if present
iio: accel: kionix-kx022a: Get the timestamp from the driver's private data in the trigger_handler
iio: adc: ad7791: fix IRQ flags
iio: buffer: make sure O_NONBLOCK is respected
iio: buffer: correctly return bytes written in output buffers
iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
iio: adis16480: select CONFIG_CRC32
drivers: iio: adc: ltc2497: fix LSB shift
iio: adc: qcom-spmi-adc5: Fix the channel name
Merge tag 'tty-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for some reported
problems:
- fsl_uart driver bugfixes
- sh-sci serial driver bugfixes
- renesas serial driver DT binding bugfixes
- 8250 DMA bugfix
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: sh-sci: Fix Rx on RZ/G2L SCI
tty: serial: fsl_lpuart: fix crash in lpuart_uport_is_active
tty: serial: fsl_lpuart: avoid checking for transfer complete when UARTCTRL_SBK is asserted in lpuart32_tx_empty
serial: 8250: Prevent starting up DMA Rx on THRI interrupt
dt-bindings: serial: renesas,scif: Fix 4th IRQ for 4-IRQ SCIFs
tty: serial: sh-sci: Fix transmit end interrupt handler
Merge tag 'usb-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB bugfixes from Greg KH:
"Here are some small USB bugfixes for 6.3-rc6 that have been in my
tree, and in linux-next, for a while. Included in here are:
- new usb-serial driver device ids
- xhci bugfixes for reported problems
- gadget driver bugfixes for reported problems
- dwc3 new device id
All have been in linux-next with no reported problems"
* tag 'usb-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: cdnsp: Fixes error: uninitialized symbol 'len'
usb: gadgetfs: Fix ep_read_iter to handle ITER_UBUF
usb: gadget: f_fs: Fix ffs_epfile_read_iter to handle ITER_UBUF
usb: typec: altmodes/displayport: Fix configure initial pin assignment
usb: dwc3: pci: add support for the Intel Meteor Lake-S
xhci: Free the command allocated for setting LPM if we return early
Revert "usb: xhci-pci: Set PROBE_PREFER_ASYNCHRONOUS"
xhci: also avoid the XHCI_ZERO_64B_REGS quirk with a passthrough iommu
USB: serial: option: add Quectel RM500U-CN modem
usb: xhci: tegra: fix sleep in atomic call
USB: serial: option: add Telit FE990 compositions
USB: serial: cp210x: add Silicon Labs IFS-USB-DATACABLE IDs
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four small fixes, all in drivers. They're all one or two lines except
for the ufs one, but that's a simple revert of a previous feature"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: iscsi_tcp: Check that sock is valid before iscsi_set_param()
scsi: qla2xxx: Fix memory leak in qla2x00_probe_one()
scsi: mpi3mr: Handle soft reset in progress fault code (0xF002)
scsi: Revert "scsi: ufs: core: Initialize devfreq synchronously"
* tag 'block-6.3-2023-04-06' of git://git.kernel.dk/linux:
block: don't set GD_NEED_PART_SCAN if scan partition failed
block: ublk: make sure that block size is set correctly
ublk: read any SQE values upfront
nvme: fix discard support without oncs
blk-mq: directly poll requests
Merge tag 'io_uring-6.3-2023-04-06' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Just two minor fixes for provided buffers - one where we could
potentially leak a buffer, and one where the returned values was
off-by-one in some cases"
* tag 'io_uring-6.3-2023-04-06' of git://git.kernel.dk/linux:
io_uring: fix memory leak when removing provided buffers
io_uring: fix return value when removing provided buffers
Merge tag 'trace-v6.3-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"A couple more minor fixes:
- Reset direct->addr back to its original value on error in updating
the direct trampoline code
- Make lastcmd_mutex static"
* tag 'trace-v6.3-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/synthetic: Make lastcmd_mutex static
ftrace: Fix issue that 'direct->addr' not restored in modify_ftrace_direct()
Merge tag 'mm-hotfixes-stable-2023-04-07-16-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM fixes from Andrew Morton:
"28 hotfixes.
23 are cc:stable and the other five address issues which were
introduced during this merge cycle.
20 are for MM and the remainder are for other subsystems"
* tag 'mm-hotfixes-stable-2023-04-07-16-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (28 commits)
maple_tree: fix a potential concurrency bug in RCU mode
maple_tree: fix get wrong data_end in mtree_lookup_walk()
mm/swap: fix swap_info_struct race between swapoff and get_swap_pages()
nilfs2: fix sysfs interface lifetime
mm: take a page reference when removing device exclusive entries
mm: vmalloc: avoid warn_alloc noise caused by fatal signal
nilfs2: initialize "struct nilfs_binfo_dat"->bi_pad field
nilfs2: fix potential UAF of struct nilfs_sc_info in nilfs_segctor_thread()
zsmalloc: document freeable stats
zsmalloc: document new fullness grouping
fsdax: force clear dirty mark if CoW
mm/hugetlb: fix uffd wr-protection for CoW optimization path
mm: enable maple tree RCU mode by default
maple_tree: add RCU lock checking to rcu callback functions
maple_tree: add smp_rmb() to dead node detection
maple_tree: fix write memory barrier of nodes once dead for RCU mode
maple_tree: remove extra smp_wmb() from mas_dead_leaves()
maple_tree: fix freeing of nodes in rcu mode
maple_tree: detect dead nodes in mas_start()
maple_tree: be more cautious about dead nodes
...
Merge tag 'gpio-fixes-for-v6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix irq handling in gpio-davinci
- fix Kconfig dependencies for gpio-regmap
* tag 'gpio-fixes-for-v6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: davinci: Add irq chip flag to skip set wake
gpio: davinci: Do not clear the bank intr enable bit in save_context
gpio: GPIO_REGMAP: select REGMAP instead of depending on it
Merge tag 'acpi-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Fix the ACPI backlight override mechanism for the cases when
acpi_backlight=video is set through the kernel command line or a DMI
quirk and add backlight quirks for Apple iMac14,1 and iMac14,2 and
Lenovo ThinkPad W530 (Hans de Goede)"
* tag 'acpi-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Add acpi_backlight=video quirk for Lenovo ThinkPad W530
ACPI: video: Add acpi_backlight=video quirk for Apple iMac14,1 and iMac14,2
ACPI: video: Make acpi_backlight=video work independent from GPU driver
ACPI: video: Add auto_detect arg to __acpi_video_get_backlight_type()
Merge tag '6.3-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
"Four fixes, three for stable:
- slab out of bounds fix
- lock cancellation fix
- minor cleanup to address clang warning
- fix for xfstest 551 (wrong parms passed to kvmalloc)"
* tag '6.3-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix slab-out-of-bounds in init_smb2_rsp_hdr
ksmbd: delete asynchronous work from list
ksmbd: remove unused is_char_allowed function
ksmbd: do not call kvmalloc() with __GFP_NORETRY | __GFP_NO_WARN
Dan Carpenter [Thu, 6 Apr 2023 08:55:47 +0000 (11:55 +0300)]
cifs: double lock in cifs_reconnect_tcon()
This lock was supposed to be an unlock.
Fixes: 6cc041e90c17 ("cifs: avoid races in parallel reconnects in smb1") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Yu Kuai [Wed, 22 Mar 2023 03:59:26 +0000 (11:59 +0800)]
block: don't set GD_NEED_PART_SCAN if scan partition failed
Currently if disk_scan_partitions() failed, GD_NEED_PART_SCAN will still
set, and partition scan will be proceed again when blkdev_get_by_dev()
is called. However, this will cause a problem that re-assemble partitioned
raid device will creat partition for underlying disk.
Test result: underlying disk partition and raid partition can be
observed at the same time
Note that this can still happen in come corner cases that
GD_NEED_PART_SCAN can be set for underlying disk while re-assemble raid
device.
Fixes: e5cfefa97bcc ("block: fix scan partition for exclusively open device again") Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
- core: don't let netpoll invoke NAPI if in xmit context
- icmp: guard against too small mtu
- ipv6: fix an uninit variable access bug in __ip6_make_skb()
- wifi: mac80211: fix the size calculation of
ieee80211_ie_len_eht_cap()
- can: fix poll() to not report false EPOLLOUT events
- eth: gve: secure enough bytes in the first TX desc for all TCP
pkts"
* tag 'net-6.3-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net: stmmac: check fwnode for phy device before scanning for phy
net: stmmac: Add queue reset into stmmac_xdp_open() function
selftests: net: rps_default_mask.sh: delete veth link specifically
net: fec: make use of MDIO C45 quirk
can: isotp: fix race between isotp_sendsmg() and isotp_release()
can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT events
can: isotp: isotp_recvmsg(): use sock_recv_cmsgs() to get SOCK_RXQ_OVFL infos
can: j1939: j1939_tp_tx_dat_new(): fix out-of-bounds memory access
gve: Secure enough bytes in the first TX desc for all TCP pkts
netlink: annotate lockless accesses to nlk->max_recvmsg_len
ethtool: reset #lanes when lanes is omitted
ping: Fix potentail NULL deref for /proc/net/icmp.
raw: Fix NULL deref in raw_get_next().
ice: Reset FDIR counter in FDIR init stage
ice: fix wrong fallback logic for FDIR
net: stmmac: fix up RX flow hash indirection table when setting channels
net: ethernet: ti: am65-cpsw: Fix mdio cleanup in probe
wifi: mt76: ignore key disable commands
wifi: ath11k: reduce the MHI timeout to 20s
ipv6: Fix an uninit variable access bug in __ip6_make_skb()
...
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
- An invalid VA range can be be put in a pages and eventually trigger
WARN_ON, reject it early
- Use of the wrong start index value when doing the complex batch carry
scheme
- Wrong store ordering resulting in corrupting data used in a later
calculation that corrupted the batch structure during carry
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Do not corrupt the pfn list when doing batch carry
iommufd: Fix unpinning of pages when an access is present
iommufd: Check for uptr overflow
Merge tag 'pwm/for-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fixes from Thierry Reding:
"These are some fixes to make sure the PWM state structure is always
initialized to a known state.
Prior to this it could happen in some situations that random data from
the stack would leak into the data structure and cause subtle bugs"
* tag 'pwm/for-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: Zero-initialize the pwm_state passed to driver's .get_state()
pwm: meson: Explicitly set .polarity in .get_state()
pwm: sprd: Explicitly set .polarity in .get_state()
pwm: iqs620a: Explicitly set .polarity in .get_state()
pwm: cros-ec: Explicitly set .polarity in .get_state()
pwm: hibvt: Explicitly set .polarity in .get_state()
Merge tag 'drm-fixes-2023-04-06' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"Mostly i915 fixes: dp mst for compression/dsc, perf ioctl uaf, ctx rpm
accounting, gt reset vs huc loading.
And a few individual driver fixes: ivpu dma fence&suspend, panfrost
mmap, nouveau color depth"
* tag 'drm-fixes-2023-04-06' of git://anongit.freedesktop.org/drm/drm:
accel/ivpu: Fix S3 system suspend when not idle
accel/ivpu: Add dma fence to command buffers only
drm/i915: Fix context runtime accounting
drm/i915: fix race condition UAF in i915_perf_add_config_ioctl
drm/i915: Use compressed bpp when calculating m/n value for DP MST DSC
drm/i915/huc: Cancel HuC delayed load timer on reset.
drm/i915/ttm: fix sparse warning
drm/panfrost: Fix the panfrost_mmu_map_fault_addr() error path
drm/nouveau/disp: Support more modes by checking with lower bpc
Merge tag 'sound-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The majority of changes here are various fixes for Intel drivers,
and there is a change in ASoC PCM core for the format constraints.
In addition, a workaround for HD-audio HDMI regressions and usual
HD-audio quirks are found"
* tag 'sound-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: Preserve the previous PCM device upon re-enablement
ALSA: hda/realtek: Add quirk for Clevo X370SNW
ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBook
ASoC: SOF: avoid a NULL dereference with unsupported widgets
ASoC: da7213.c: add missing pm_runtime_disable()
ASoC: hdac_hdmi: use set_stream() instead of set_tdm_slots()
ASoC: codecs: lpass: fix the order or clks turn off during suspend
ASoC: Intel: bytcr_rt5640: Add quirk for the Acer Iconia One 7 B1-750
ASoC: SOF: ipc4: Ensure DSP is in D0I0 during sof_ipc4_set_get_data()
ASoC: amd: yc: Add DMI entries to support Victus by HP Laptop 16-e1xxx (8A22)
ASoC: soc-pcm: fix hw->formats cleared by soc_pcm_hw_init() for dpcm
ASoC: Intel: soc-acpi: add table for Intel 'Rooks County' NUC M15
ASOC: Intel: sof_sdw: add quirk for Intel 'Rooks County' NUC M15
Merge tag 'platform-drivers-x86-v6.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- more think-lmi fixes
- one DMI quirk addition
* tag 'platform-drivers-x86-v6.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Add missing T14s Gen1 type to s2idle quirk list
platform/x86: think-lmi: Clean up display of current_value on Thinkstation
platform/x86: think-lmi: Fix memory leaks when parsing ThinkStation WMI strings
platform/x86: think-lmi: Fix memory leak when showing current settings
Merge tag 'asm-generic-fixes-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"These are minor fixes to address false-positive build warnings:
Some of the less common I/O accessors are missing __force casts and
cause sparse warnings for their implied byteswap, and a recent change
to __generic_cmpxchg_local() causes a warning about constant integer
truncation"
* tag 'asm-generic-fixes-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: avoid __generic_cmpxchg_local warnings
asm-generic/io.h: suppress endianness warnings for relaxed accessors
asm-generic/io.h: suppress endianness warnings for readq() and writeq()
net: stmmac: check fwnode for phy device before scanning for phy
Some DT devices already have phy device configured in the DT/ACPI.
Current implementation scans for a phy unconditionally even though
there is a phy listed in the DT/ACPI and already attached.
We should check the fwnode if there is any phy device listed in
fwnode and decide whether to scan for a phy to attach to.
Fixes: fe2cfbc96803 ("net: stmmac: check if MAC needs to attach to a PHY") Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/lkml/20230403212434.296975-1-martin.blumenstingl@googlemail.com/ Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Shahab Vahedi <shahab@synopsys.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com> Link: https://lore.kernel.org/r/20230406024541.3556305-1-michael.wei.hong.sit@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zheng Yejian [Thu, 30 Mar 2023 02:52:23 +0000 (10:52 +0800)]
ftrace: Fix issue that 'direct->addr' not restored in modify_ftrace_direct()
Syzkaller report a WARNING: "WARN_ON(!direct)" in modify_ftrace_direct().
Root cause is 'direct->addr' was changed from 'old_addr' to 'new_addr' but
not restored if error happened on calling ftrace_modify_direct_caller().
Then it can no longer find 'direct' by that 'old_addr'.
To fix it, restore 'direct->addr' to 'old_addr' explicitly in error path.
Petr Tesarik [Thu, 6 Apr 2023 14:35:39 +0000 (16:35 +0200)]
swiotlb: fix a braino in the alignment check fix
The alignment mask in swiotlb_do_find_slots() masks off the high
bits which are not relevant for the alignment, so multiple
requirements are combined with a bitwise OR rather than AND.
In plain English, the stricter the alignment, the more bits must
be set in iotlb_align_mask.
Confusion may arise from the fact that the same variable is also
used to mask off the offset within a swiotlb slot, which is
achieved with a bitwise AND.
Since SQE memory is shared with userspace, we should only be reading it
once. We cannot read it multiple times, particularly when it's read once
for validation and then read again for the actual use.
ublk_ch_uring_cmd() is safe when called as a retry operation, as the
memory backing is stable at that point. But for normal issue, we want
to ensure that we only read ublksrv_io_cmd once. Wrap the function in
a helper that reads the value into an on-stack copy of the struct.
Cc: stable@vger.kernel.org # 6.0+ Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
net: stmmac: Add queue reset into stmmac_xdp_open() function
Queue reset was moved out from __init_dma_rx_desc_rings() and
__init_dma_tx_desc_rings() functions. Thus, the driver fails to transmit
and receive packet after XDP prog setup.
This commit adds the missing queue reset into stmmac_xdp_open() function.
Fixes: f9ec5723c3db ("net: ethernet: stmicro: stmmac: move queue reset to dedicated functions") Cc: <stable@vger.kernel.org> # 6.0+ Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230404044823.3226144-1-yoong.siang.song@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hangbin Liu [Tue, 4 Apr 2023 07:24:11 +0000 (15:24 +0800)]
selftests: net: rps_default_mask.sh: delete veth link specifically
When deleting the netns and recreating a new one while re-adding the
veth interface, there is a small window of time during which the old
veth interface has not yet been removed. This can cause the new addition
to fail. To resolve this issue, we can either wait for a short while to
ensure that the old veth interface is deleted, or we can specifically
remove the veth interface.
Before this patch:
# ./rps_default_mask.sh
empty rps_default_mask [ ok ]
changing rps_default_mask dont affect existing devices [ ok ]
changing rps_default_mask dont affect existing netns [ ok ]
changing rps_default_mask affect newly created devices [ ok ]
changing rps_default_mask don't affect newly child netns[II][ ok ]
rps_default_mask is 0 by default in child netns [ ok ]
RTNETLINK answers: File exists
changing rps_default_mask in child ns don't affect the main one[ ok ]
cat: /sys/class/net/vethC11an1/queues/rx-0/rps_cpus: No such file or directory
changing rps_default_mask in child ns affects new childns devices./rps_default_mask.sh: line 36: [: -eq: unary operator expected
[fail] expected 1 found
changing rps_default_mask in child ns don't affect existing devices[ ok ]
After this patch:
# ./rps_default_mask.sh
empty rps_default_mask [ ok ]
changing rps_default_mask dont affect existing devices [ ok ]
changing rps_default_mask dont affect existing netns [ ok ]
changing rps_default_mask affect newly created devices [ ok ]
changing rps_default_mask don't affect newly child netns[II][ ok ]
rps_default_mask is 0 by default in child netns [ ok ]
changing rps_default_mask in child ns don't affect the main one[ ok ]
changing rps_default_mask in child ns affects new childns devices[ ok ]
changing rps_default_mask in child ns don't affect existing devices[ ok ]
Not all fec MDIO bus drivers support C45 mode transactions. The older fec
hardware block in many ColdFire SoCs does not appear to support them, at
least according to most of the different ColdFire SoC reference manuals.
The bits used to generate C45 access on the iMX parts, in the OP field
of the MMFR register, are documented as generating non-compliant MII
frames (it is not documented as to exactly how they are non-compliant).
Commit 8d03ad1ab0b0 ("net: fec: Separate C22 and C45 transactions")
means the fec driver will always register c45 MDIO read and write
methods. During probe these will always be accessed now generating
non-compliant MII accesses on ColdFire based devices.
Add a quirk define, FEC_QUIRK_HAS_MDIO_C45, that can be used to
distinguish silicon that supports MDIO C45 framing or not. Add this to
all the existing iMX quirks, so they will be behave as they do now (*).
(*) it seems that some iMX parts may not support C45 transactions either.
The iMX25 and iMX50 Reference Manuals contain similar wording to
the ColdFire Reference Manuals on this.
Fixes: 8d03ad1ab0b0 ("net: fec: Separate C22 and C45 transactions") Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Reviewed-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230404052207.3064861-1-gerg@linux-m68k.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When CPU1 is about to execute the instruction pointed to by IP, the
ma_data_end() executed by CPU2 may return the wrong end position, which
will cause the value loaded by mtree_load() to be wrong.
An example of triggering the bug:
Add mdelay(100) between rcu_assign_pointer() and ma_set_meta() in
mas_root_expand().
static DEFINE_MTREE(tree);
int work(void *p) {
unsigned long val;
for (int i = 0 ; i< 30; ++i) {
val = (unsigned long)mtree_load(&tree, 8);
mdelay(5);
pr_info("%lu",val);
}
return 0;
}
In RCU mode, mtree_load() should always return the value before or after
the data structure is modified, and in this example mtree_load(&tree, 8)
may return 56789 which is not expected, it should always return NULL. Fix
it by put ma_set_meta() before rcu_assign_pointer().
Link: https://lkml.kernel.org/r/20230314124203.91572-4-zhangpeng.00@bytedance.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peng Zhang [Tue, 14 Mar 2023 12:42:01 +0000 (20:42 +0800)]
maple_tree: fix get wrong data_end in mtree_lookup_walk()
if (likely(offset > end))
max = pivots[offset];
The above code should be changed to if (likely(offset < end)), which is
correct. This affects the correctness of ma_data_end(). Now it seems
that the final result will not be wrong, but it is best to change it.
This patch does not change the code as above, because it simplifies the
code by the way.
Rongwei Wang [Tue, 4 Apr 2023 15:47:16 +0000 (23:47 +0800)]
mm/swap: fix swap_info_struct race between swapoff and get_swap_pages()
The si->lock must be held when deleting the si from the available list.
Otherwise, another thread can re-add the si to the available list, which
can lead to memory corruption. The only place we have found where this
happens is in the swapoff path. This case can be described as below:
core 0 core 1
swapoff
del_from_avail_list(si) waiting
try lock si->lock acquire swap_avail_lock
and re-add si into
swap_avail_head
acquire si->lock but missing si already being added again, and continuing
to clear SWP_WRITEOK, etc.
It can be easily found that a massive warning messages can be triggered
inside get_swap_pages() by some special cases, for example, we call
madvise(MADV_PAGEOUT) on blocks of touched memory concurrently, meanwhile,
run much swapon-swapoff operations (e.g. stress-ng-swap).
However, in the worst case, panic can be caused by the above scene. In
swapoff(), the memory used by si could be kept in swap_info[] after
turning off a swap. This means memory corruption will not be caused
immediately until allocated and reset for a new swap in the swapon path.
A panic message caused: (with CONFIG_PLIST_DEBUG enabled)
Now, si->lock locked before calling 'del_from_avail_list()' to make sure
other thread see the si had been deleted and SWP_WRITEOK cleared together,
will not reinsert again.
This problem exists in versions after stable 5.10.y.
Link: https://lkml.kernel.org/r/20230404154716.23058-1-rongwei.wang@linux.alibaba.com Fixes: a2468cc9bfdff ("swap: choose swap device according to numa node") Tested-by: Yongchen Yin <wb-yyc939293@alibaba-inc.com> Signed-off-by: Rongwei Wang <rongwei.wang@linux.alibaba.com> Cc: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Aaron Lu <aaron.lu@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ryusuke Konishi [Thu, 30 Mar 2023 20:55:15 +0000 (05:55 +0900)]
nilfs2: fix sysfs interface lifetime
The current nilfs2 sysfs support has issues with the timing of creation
and deletion of sysfs entries, potentially leading to null pointer
dereferences, use-after-free, and lockdep warnings.
Some of the sysfs attributes for nilfs2 per-filesystem instance refer to
metadata file "cpfile", "sufile", or "dat", but
nilfs_sysfs_create_device_group that creates those attributes is executed
before the inodes for these metadata files are loaded, and
nilfs_sysfs_delete_device_group which deletes these sysfs entries is
called after releasing their metadata file inodes.
Therefore, access to some of these sysfs attributes may occur outside of
the lifetime of these metadata files, resulting in inode NULL pointer
dereferences or use-after-free.
In addition, the call to nilfs_sysfs_create_device_group() is made during
the locking period of the semaphore "ns_sem" of nilfs object, so the
shrinker call caused by the memory allocation for the sysfs entries, may
derive lock dependencies "ns_sem" -> (shrinker) -> "locks acquired in
nilfs_evict_inode()".
Since nilfs2 may acquire "ns_sem" deep in the call stack holding other
locks via its error handler __nilfs_error(), this causes lockdep to report
circular locking. This is a false positive and no circular locking
actually occurs as no inodes exist yet when
nilfs_sysfs_create_device_group() is called. Fortunately, the lockdep
warnings can be resolved by simply moving the call to
nilfs_sysfs_create_device_group() out of "ns_sem".
This fixes these sysfs issues by revising where the device's sysfs
interface is created/deleted and keeping its lifetime within the lifetime
of the metadata files above.
Alistair Popple [Thu, 30 Mar 2023 01:25:19 +0000 (12:25 +1100)]
mm: take a page reference when removing device exclusive entries
Device exclusive page table entries are used to prevent CPU access to a
page whilst it is being accessed from a device. Typically this is used to
implement atomic operations when the underlying bus does not support
atomic access. When a CPU thread encounters a device exclusive entry it
locks the page and restores the original entry after calling mmu notifiers
to signal drivers that exclusive access is no longer available.
The device exclusive entry holds a reference to the page making it safe to
access the struct page whilst the entry is present. However the fault
handling code does not hold the PTL when taking the page lock. This means
if there are multiple threads faulting concurrently on the device
exclusive entry one will remove the entry whilst others will wait on the
page lock without holding a reference.
This can lead to threads locking or waiting on a folio with a zero
refcount. Whilst mmap_lock prevents the pages getting freed via munmap()
they may still be freed by a migration. This leads to warnings such as
PAGE_FLAGS_CHECK_AT_FREE due to the page being locked when the refcount
drops to zero.
Fix this by trying to take a reference on the folio before locking it.
The code already checks the PTE under the PTL and aborts if the entry is
no longer there. It is also possible the folio has been unmapped, freed
and re-allocated allowing a reference to be taken on an unrelated folio.
This case is also detected by the PTE check and the folio is unlocked
without further changes.
Link: https://lkml.kernel.org/r/20230330012519.804116-1-apopple@nvidia.com Fixes: b756a3b5e7ea ("mm: device exclusive memory access") Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This failure really confuse me as there're still lots of available pages.
Finally I figured out it was caused by a fatal signal. When a process is
allocating memory via vm_area_alloc_pages(), it will break directly even
if it hasn't allocated the requested pages when it receives a fatal
signal. In that case, we shouldn't show this warn_alloc, as it is
useless. We only need to show this warning when there're really no enough
pages.
Link: https://lkml.kernel.org/r/20230330162625.13604-1-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tetsuo Handa [Sun, 26 Mar 2023 15:21:46 +0000 (00:21 +0900)]
nilfs2: initialize "struct nilfs_binfo_dat"->bi_pad field
nilfs_btree_assign_p() and nilfs_direct_assign_p() are not initializing
"struct nilfs_binfo_dat"->bi_pad field, causing uninit-value reports when
being passed to CRC function.
Ryusuke Konishi [Mon, 27 Mar 2023 17:53:18 +0000 (02:53 +0900)]
nilfs2: fix potential UAF of struct nilfs_sc_info in nilfs_segctor_thread()
The finalization of nilfs_segctor_thread() can race with
nilfs_segctor_kill_thread() which terminates that thread, potentially
causing a use-after-free BUG as KASAN detected.
At the end of nilfs_segctor_thread(), it assigns NULL to "sc_task" member
of "struct nilfs_sc_info" to indicate the thread has finished, and then
notifies nilfs_segctor_kill_thread() of this using waitqueue
"sc_wait_task" on the struct nilfs_sc_info.
However, here, immediately after the NULL assignment to "sc_task", it is
possible that nilfs_segctor_kill_thread() will detect it and return to
continue the deallocation, freeing the nilfs_sc_info structure before the
thread does the notification.
This fixes the issue by protecting the NULL assignment to "sc_task" and
its notification, with spinlock "sc_state_lock" of the struct
nilfs_sc_info. Since nilfs_segctor_kill_thread() does a final check to
see if "sc_task" is NULL with "sc_state_lock" locked, this can eliminate
the race.
Link: https://lkml.kernel.org/r/1679653680-2-1-git-send-email-ruansy.fnst@fujitsu.com Fixes: f80e1668888f3 ("fsdax: invalidate pages when CoW") Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Tue, 21 Mar 2023 19:18:40 +0000 (15:18 -0400)]
mm/hugetlb: fix uffd wr-protection for CoW optimization path
This patch fixes an issue that a hugetlb uffd-wr-protected mapping can be
writable even with uffd-wp bit set. It only happens with hugetlb private
mappings, when someone firstly wr-protects a missing pte (which will
install a pte marker), then a write to the same page without any prior
access to the page.
Userfaultfd-wp trap for hugetlb was implemented in hugetlb_fault() before
reaching hugetlb_wp() to avoid taking more locks that userfault won't
need. However there's one CoW optimization path that can trigger
hugetlb_wp() inside hugetlb_no_page(), which will bypass the trap.
This patch skips hugetlb_wp() for CoW and retries the fault if uffd-wp bit
is detected. The new path will only trigger in the CoW optimization path
because generic hugetlb_fault() (e.g. when a present pte was
wr-protected) will resolve the uffd-wp bit already. Also make sure
anonymous UNSHARE won't be affected and can still be resolved, IOW only
skip CoW not CoR.
This patch will be needed for v5.19+ hence copy stable.
[peterx@redhat.com: v2] Link: https://lkml.kernel.org/r/ZBzOqwF2wrHgBVZb@x1n
[peterx@redhat.com: v3] Link: https://lkml.kernel.org/r/20230324142620.2344140-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230321191840.1897940-1-peterx@redhat.com Fixes: 166f3ecc0daf ("mm/hugetlb: hook page faults for uffd write protection") Signed-off-by: Peter Xu <peterx@redhat.com> Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Liam R. Howlett [Mon, 27 Feb 2023 17:36:07 +0000 (09:36 -0800)]
mm: enable maple tree RCU mode by default
Use the maple tree in RCU mode for VMA tracking.
The maple tree tracks the stack and is able to update the pivot
(lower/upper boundary) in-place to allow the page fault handler to write
to the tree while holding just the mmap read lock. This is safe as the
writes to the stack have a guard VMA which ensures there will always be a
NULL in the direction of the growth and thus will only update a pivot.
It is possible, but not recommended, to have VMAs that grow up/down
without guard VMAs. syzbot has constructed a testcase which sets up a VMA
to grow and consume the empty space. Overwriting the entire NULL entry
causes the tree to be altered in a way that is not safe for concurrent
readers; the readers may see a node being rewritten or one that does not
match the maple state they are using.
Enabling RCU mode allows the concurrent readers to see a stable node and
will return the expected result.
Liam R. Howlett [Mon, 27 Feb 2023 17:36:06 +0000 (09:36 -0800)]
maple_tree: add RCU lock checking to rcu callback functions
Dereferencing RCU objects within the RCU callback without the RCU check
has caused lockdep to complain. Fix the RCU dereferencing by using the
RCU callback lock to ensure the operation is safe.
Also stop creating a new lock to use for dereferencing during destruction
of the tree or subtree. Instead, pass through a pointer to the tree that
has the lock that is held for RCU dereferencing checking. It also does
not make sense to use the maple state in the freeing scenario as the tree
walk is a special case where the tree no longer has the normal encodings
and parent pointers.
Link: https://lkml.kernel.org/r/20230227173632.3292573-8-surenb@google.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by: Suren Baghdasaryan <surenb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Liam R. Howlett [Mon, 27 Feb 2023 17:36:05 +0000 (09:36 -0800)]
maple_tree: add smp_rmb() to dead node detection
Add an smp_rmb() before reading the parent pointer to ensure that anything
read from the node prior to the parent pointer hasn't been reordered ahead
of this check.
The is necessary for RCU mode.
Link: https://lkml.kernel.org/r/20230227173632.3292573-7-surenb@google.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Liam R. Howlett [Mon, 27 Feb 2023 17:36:04 +0000 (09:36 -0800)]
maple_tree: fix write memory barrier of nodes once dead for RCU mode
During the development of the maple tree, the strategy of freeing multiple
nodes changed and, in the process, the pivots were reused to store
pointers to dead nodes. To ensure the readers see accurate pivots, the
writers need to mark the nodes as dead and call smp_wmb() to ensure any
readers can identify the node as dead before using the pivot values.
There were two places where the old method of marking the node as dead
without smp_wmb() were being used, which resulted in RCU readers seeing
the wrong pivot value before seeing the node was dead. Fix this race
condition by using mte_set_node_dead() which has the smp_wmb() call to
ensure the race is closed.
Add a WARN_ON() to the ma_free_rcu() call to ensure all nodes being freed
are marked as dead to ensure there are no other call paths besides the two
updated paths.
This is necessary for the RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-6-surenb@google.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Liam Howlett [Mon, 27 Feb 2023 17:36:03 +0000 (09:36 -0800)]
maple_tree: remove extra smp_wmb() from mas_dead_leaves()
The call to mte_set_dead_node() before the smp_wmb() already calls
smp_wmb() so this is not needed. This is an optimization for the RCU mode
of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-5-surenb@google.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Liam Howlett [Mon, 27 Feb 2023 17:36:02 +0000 (09:36 -0800)]
maple_tree: fix freeing of nodes in rcu mode
The walk to destroy the nodes was not always setting the node type and
would result in a destroy method potentially using the values as nodes.
Avoid this by setting the correct node types. This is necessary for the
RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-4-surenb@google.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Liam Howlett [Mon, 27 Feb 2023 17:36:01 +0000 (09:36 -0800)]
maple_tree: detect dead nodes in mas_start()
When initially starting a search, the root node may already be in the
process of being replaced in RCU mode. Detect and restart the walk if
this is the case. This is necessary for RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-3-surenb@google.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Liam Howlett [Mon, 27 Feb 2023 17:36:00 +0000 (09:36 -0800)]
maple_tree: be more cautious about dead nodes
Patch series "Fix VMA tree modification under mmap read lock".
Syzbot reported a BUG_ON in mm/mmap.c which was found to be caused by an
inconsistency between threads walking the VMA maple tree. The
inconsistency is caused by the page fault handler modifying the maple tree
while holding the mmap_lock for read.
This only happens for stack VMAs. We had thought this was safe as it only
modifies a single pivot in the tree. Unfortunately, syzbot constructed a
test case where the stack had no guard page and grew the stack to abut the
next VMA. This causes us to delete the NULL entry between the two VMAs
and rewrite the node.
We considered several options for fixing this, including dropping the
mmap_lock, then reacquiring it for write; and relaxing the definition of
the tree to permit a zero-length NULL entry in the node. We decided the
best option was to backport some of the RCU patches from -next, which
solve the problem by allocating a new node and RCU-freeing the old node.
Since the problem exists in 6.1, we preferred a solution which is similar
to the one we intended to merge next merge window.
These patches have been in -next since next-20230301, and have received
intensive testing in Android as part of the RCU page fault patchset. They
were also sent as part of the "Per-VMA locks" v4 patch series. Patches 1
to 7 are bug fixes for RCU mode of the tree and patch 8 enables RCU mode
for the tree.
Performance v6.3-rc3 vs patched v6.3-rc3: Running these changes through
mmtests showed there was a 15-20% performance decrease in
will-it-scale/brk1-processes. This tests creating and inserting a single
VMA repeatedly through the brk interface and isn't representative of any
real world applications.
This patch (of 8):
ma_pivots() and ma_data_end() may be called with a dead node. Ensure to
that the node isn't dead before using the returned values.
This is necessary for RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230327185532.2354250-1-Liam.Howlett@oracle.com Link: https://lkml.kernel.org/r/20230227173632.3292573-1-surenb@google.com Link: https://lkml.kernel.org/r/20230227173632.3292573-2-surenb@google.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Chris Li <chriscli@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: freak07 <michalechner92@googlemail.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jakub Kicinski [Thu, 6 Apr 2023 00:24:26 +0000 (17:24 -0700)]
Merge tag 'wireless-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.3
mt76 has a fix for leaking cleartext frames on a certain scenario and
two firmware file handling related fixes. For brcmfmac we have a fix
for an older SDIO suspend regression and for ath11k avoiding a kernel
crash during hibernation with SUSE kernels.
* tag 'wireless-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mt76: ignore key disable commands
wifi: ath11k: reduce the MHI timeout to 20s
wifi: mt76: mt7921: fix fw used for offload check for mt7922
wifi: mt76: mt7921: Fix use-after-free in fw features query.
wifi: brcmfmac: Fix SDIO suspend/resume regression
====================
Jakub Kicinski [Thu, 6 Apr 2023 00:22:06 +0000 (17:22 -0700)]
Merge tag 'linux-can-fixes-for-6.3-20230405' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2023-04-05
The first patch is by Oleksij Rempel and fixes a out-of-bounds memory
access in the j1939 protocol.
The remaining 3 patches target the ISOTP protocol. Oliver Hartkopp
fixes the ISOTP protocol to pass information about dropped PDUs to the
user space via control messages. Michal Sojka's patch fixes poll() to
not forward false EPOLLOUT events. And Oliver Hartkopp fixes a race
condition between isotp_sendsmg() and isotp_release().
* tag 'linux-can-fixes-for-6.3-20230405' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: isotp: fix race between isotp_sendsmg() and isotp_release()
can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT events
can: isotp: isotp_recvmsg(): use sock_recv_cmsgs() to get SOCK_RXQ_OVFL infos
can: j1939: j1939_tp_tx_dat_new(): fix out-of-bounds memory access
====================
Hans de Goede [Tue, 4 Apr 2023 11:02:49 +0000 (13:02 +0200)]
ACPI: video: Add acpi_backlight=video quirk for Lenovo ThinkPad W530
The Lenovo ThinkPad W530 uses a nvidia k1000m GPU. When this gets used
together with one of the older nvidia binary driver series (the latest
series does not support it), then backlight control does not work.
This is caused by commit 3dbc80a3e4c5 ("ACPI: video: Make backlight
class device registration a separate step (v2)") combined with
commit 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for
creating ACPI backlight by default").
After these changes the acpi_video# backlight device is only registered
when requested by a GPU driver calling acpi_video_register_backlight()
which the nvidia binary driver does not do.
I realize that using the nvidia binary driver is not a supported use-case
and users can workaround this by adding acpi_backlight=video on the kernel
commandline, but the ThinkPad W530 is a popular model under Linux users,
so it seems worthwhile to add a quirk for this.
I will also email Nvidia asking them to make the driver call
acpi_video_register_backlight() when an internal LCD panel is detected.
So maybe the next maintenance release of the drivers will fix this...
Fixes: 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default") Cc: All applicable <stable@vger.kernel.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 4 Apr 2023 11:02:48 +0000 (13:02 +0200)]
ACPI: video: Add acpi_backlight=video quirk for Apple iMac14,1 and iMac14,2
On the Apple iMac14,1 and iMac14,2 all-in-ones (monitors with builtin "PC")
the connection between the GPU and the panel is seen by the GPU driver as
regular DP instead of eDP, causing the GPU driver to never call
acpi_video_register_backlight().
(GPU drivers only call acpi_video_register_backlight() when an internal
panel is detected, to avoid non working acpi_video# devices getting
registered on desktops which unfortunately is a real issue.)
Fix the missing acpi_video# backlight device on these all-in-ones by
adding a acpi_backlight=video DMI quirk, so that video.ko will
immediately register the backlight device instead of waiting for
an acpi_video_register_backlight() call.
Fixes: 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default") Cc: All applicable <stable@vger.kernel.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 4 Apr 2023 11:02:47 +0000 (13:02 +0200)]
ACPI: video: Make acpi_backlight=video work independent from GPU driver
Commit 3dbc80a3e4c5 ("ACPI: video: Make backlight class device
registration a separate step (v2)") combined with
commit 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for
creating ACPI backlight by default")
Means that the video.ko code now fully depends on the GPU driver calling
acpi_video_register_backlight() for the acpi_video# backlight class
devices to get registered.
This means that if the GPU driver does not do this, acpi_backlight=video
on the cmdline, or DMI quirks for selecting acpi_video# will not work.
This is a problem on for example Apple iMac14,1 all-in-ones where
the monitor's LCD panel shows up as a regular DP connection instead of
eDP so the GPU driver will not call acpi_video_register_backlight() [1].
Fix this by making video.ko directly register the acpi_video# devices
when these have been explicitly requested either on the cmdline or
through DMI quirks (rather then auto-detection being used).
[1] GPU drivers only call acpi_video_register_backlight() when an internal
panel is detected, to avoid non working acpi_video# devices getting
registered on desktops which unfortunately is a real issue.
Fixes: 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default") Cc: All applicable <stable@vger.kernel.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 4 Apr 2023 11:02:46 +0000 (13:02 +0200)]
ACPI: video: Add auto_detect arg to __acpi_video_get_backlight_type()
Allow callers of __acpi_video_get_backlight_type() to pass a pointer
to a bool which will get set to false if the backlight-type comes from
the cmdline or a DMI quirk and set to true if auto-detection was used.
And make __acpi_video_get_backlight_type() non static so that it can
be called directly outside of video_detect.c .
While at it turn the acpi_video_get_backlight_type() and
acpi_video_backlight_use_native() wrappers into static inline functions
in include/acpi/video.h, so that we need to export one less symbol.
Fixes: 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default") Cc: All applicable <stable@vger.kernel.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cifs: sanitize paths in cifs_update_super_prepath.
After a server reboot, clients are failing to move files with ENOENT.
This is caused by DFS referrals containing multiple separators, which
the server move call doesn't recognize.
v1: Initial patch.
v2: Move prototype to header.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2182472 Fixes: a31080899d5f ("cifs: sanitize multiple delimiters in prepath")
Actually-Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api") Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Thiago Rafael Becker <tbecker@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
usb: gadgetfs: Fix ep_read_iter to handle ITER_UBUF
iov_iter for ep_read_iter can be ITER_UBUF with io_uring.
In that case dup_iter() does not have to allocate iov and it can
return NULL. Fix the assumption by checking for iter_is_ubuf()
other wise ep_read_iter can treat this as failure and return -ENOMEM.
Fixes: 1e23db450cff ("io_uring: use iter_ubuf for single range imports") Signed-off-by: Sandeep Dhavale <dhavale@google.com> Acked-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/20230401060509.3608259-3-dhavale@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: gadget: f_fs: Fix ffs_epfile_read_iter to handle ITER_UBUF
iov_iter for ffs_epfile_read_iter can be ITER_UBUF with io_uring.
In that case dup_iter() does not have to allocate anything and it
can return NULL. ffs_epfile_read_iter treats this as a failure and
returns -ENOMEM. Fix it by checking if iter_is_ubuf().
Fixes: 1e23db450cff ("io_uring: use iter_ubuf for single range imports") Signed-off-by: Sandeep Dhavale <dhavale@google.com> Acked-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/20230401060509.3608259-2-dhavale@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While determining the initial pin assignment to be sent in the configure
message, using the DP_PIN_ASSIGN_DP_ONLY_MASK mask causes the DFP_U to
send both Pin Assignment C and E when both are supported by the DFP_U and
UFP_U. The spec (Table 5-7 DFP_U Pin Assignment Selection Mandates,
VESA DisplayPort Alt Mode Standard v2.0) indicates that the DFP_U never
selects Pin Assignment E when Pin Assignment C is offered.
Update the DP_PIN_ASSIGN_DP_ONLY_MASK conditional to intially select only
Pin Assignment C if it is available.
arm64: compat: Work around uninitialized variable warning
Dan reports that smatch complains about a potential uninitialized
variable being used in the compat alignment fixup code.
The logic is not wrong per se, but we do end up using an uninitialized
variable if reading the instruction that triggered the alignment fault
from user space faults, even if the fault ensures that the uninitialized
value doesn't propagate any further.
Given that we just give up and return 1 if any fault occurs when reading
the instruction, let's get rid of the 'success handling' pattern that
captures the fault in a variable and aborts later, and instead, just
return 1 immediately if any of the get_user() calls result in an
exception.
Merge tag 'trace-v6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix timerlat notification, as it was not triggering the notify to
users when a new max latency was hit.
- Do not trigger max latency if the tracing is off.
When tracing is off, the ring buffer is not updated, it does not make
sense to notify when there's a new max latency detected by the
tracer, as why that latency happened is not available. The tracing
logic still runs when the ring buffer is disabled, but it should not
be triggering notifications.
- Fix race on freeing the synthetic event "last_cmd" variable by adding
a mutex around it.
- Fix race between reader and writer of the ring buffer by adding
memory barriers. When the writer is still on the reader page it must
have its content visible on the buffer before it moves the commit
index that the reader uses to know how much content is on the page.
- Make get_lock_parent_ip() always inlined, as it uses _THIS_IP_ and
_RET_IP_, which gets broken if it is not inlined.
- Make __field(int, arr[5]) in a TRACE_EVENT() macro fail to build.
The field formats of trace events are calculated by using
sizeof(type) and other means by what is passed into the structure
macros like __field(). The __field() macro is only meant for atom
types like int, long, short, pointer, etc. It is not meant for
arrays.
The code will currently compile with arrays, but then the format
produced will be inaccurate, and user space parsing tools will break.
Two bugs have already been fixed, now add code that will make the
kernel fail to build if another trace event includes this buggy field
format.
- Fix boot up snapshot code:
Boot snapshots were triggering when not even asked for on the kernel
command line. This was caused by two bugs:
1) It would trigger a snapshot on any instance if one was created
from the kernel command line.
2) The error handling would only affect the top level instance.
So the fact that a snapshot was done on a instance that didn't
allocate a buffer triggered a warning written into the top level
buffer, and worse yet, disabled the top level buffer.
- Fix memory leak that was caused when an error was logged in a trace
buffer instance, and then the buffer instance was removed.
The allocated error log messages still needed to be freed.
* tag 'trace-v6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Free error logs of tracing instances
tracing: Fix ftrace_boot_snapshot command line logic
tracing: Have tracing_snapshot_instance_cond() write errors to the appropriate instance
tracing: Error if a trace event has an array for a __field()
tracing/osnoise: Fix notify new tracing_max_latency
tracing/timerlat: Notify new max thread latency
ftrace: Mark get_lock_parent_ip() __always_inline
ring-buffer: Fix race while reader and writer are on the same page
tracing/synthetic: Fix races on freeing last_cmd
Keith Busch [Mon, 3 Apr 2023 20:09:25 +0000 (13:09 -0700)]
nvme: fix discard support without oncs
The device can report discard support without setting the ONCS DSM bit.
When not set, the driver clears max_discard_size expecting it to be set
later. We don't know the size until we have the namespace format,
though, so setting it is deferred until configuring one, but the driver
was abandoning the discard settings due to that initial clearing.
Move the max_discard_size calculation above the check for a '0' discard
size.
When a tracing instance is removed, the error messages that hold errors
that occurred in the instance needs to be freed. The following reports a
memory leak:
Oliver Hartkopp [Fri, 31 Mar 2023 13:19:35 +0000 (15:19 +0200)]
can: isotp: fix race between isotp_sendsmg() and isotp_release()
As discussed with Dae R. Jeong and Hillf Danton here [1] the sendmsg()
function in isotp.c might get into a race condition when restoring the
former tx.state from the old_state.
Remove the old_state concept and implement proper locking for the
ISOTP_IDLE transitions in isotp_sendmsg(), inspired by a
simplification idea from Hillf Danton.
Introduce a new tx.state ISOTP_SHUTDOWN and use the same locking
mechanism from isotp_release() which resolves a potential race between
isotp_sendsmg() and isotp_release().
v1: https://lore.kernel.org/all/20230331102114.15164-1-socketcan@hartkopp.net
v2: https://lore.kernel.org/all/20230331123600.3550-1-socketcan@hartkopp.net
take care of signal interrupts for wait_event_interruptible() in
isotp_release()
v3: https://lore.kernel.org/all/20230331130654.9886-1-socketcan@hartkopp.net
take care of signal interrupts for wait_event_interruptible() in
isotp_sendmsg() in the wait_tx_done case
v4: https://lore.kernel.org/all/20230331131935.21465-1-socketcan@hartkopp.net
take care of signal interrupts for wait_event_interruptible() in
isotp_sendmsg() in ALL cases
Cc: Dae R. Jeong <threeearcat@gmail.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Fixes: 4f027cba8216 ("can: isotp: split tx timer into transmission and timeout") Link: https://lore.kernel.org/all/20230331131935.21465-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org
[mkl: rephrase commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Daniel Vetter [Wed, 5 Apr 2023 09:14:18 +0000 (11:14 +0200)]
Merge tag 'drm-intel-fixes-2023-04-05' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v6.3-rc6:
- Fix DP MST DSC M/N calculation to use compressed bpp
- Fix racy use-after-free in perf ioctl
- Fix context runtime accounting
- Fix handling of GT reset during HuC loading
- Fix use of unsigned vm_fault_t for error values
Michal Sojka [Fri, 31 Mar 2023 12:55:11 +0000 (14:55 +0200)]
can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT events
When using select()/poll()/epoll() with a non-blocking ISOTP socket to
wait for when non-blocking write is possible, a false EPOLLOUT event
is sometimes returned. This can happen at least after sending a
message which must be split to multiple CAN frames.
The reason is that isotp_sendmsg() returns -EAGAIN when tx.state is
not equal to ISOTP_IDLE and this behavior is not reflected in
datagram_poll(), which is used in isotp_ops.
This is fixed by introducing ISOTP-specific poll function, which
suppresses the EPOLLOUT events in that case.
Signed-off-by: Michal Sojka <michal.sojka@cvut.cz> Reported-by: Jakub Jira <jirajak2@fel.cvut.cz> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/all/20230331125511.372783-1-michal.sojka@cvut.cz Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In the j1939_tp_tx_dat_new() function, an out-of-bounds memory access
could occur during the memcpy() operation if the size of skb->cb is
larger than the size of struct j1939_sk_buff_cb. This is because the
memcpy() operation uses the size of skb->cb, leading to a read beyond
the struct j1939_sk_buff_cb.
Updated the memcpy() operation to use the size of struct
j1939_sk_buff_cb instead of the size of skb->cb. This ensures that the
memcpy() operation only reads the memory within the bounds of struct
j1939_sk_buff_cb, preventing out-of-bounds memory access.
Additionally, add a BUILD_BUG_ON() to check that the size of skb->cb
is greater than or equal to the size of struct j1939_sk_buff_cb. This
ensures that the skb->cb buffer is large enough to hold the
j1939_sk_buff_cb structure.
Kan Liang [Wed, 22 Mar 2023 20:24:49 +0000 (13:24 -0700)]
perf/core: Fix the same task check in perf_event_set_output
The same task check in perf_event_set_output has some potential issues
for some usages.
For the current perf code, there is a problem if using of
perf_event_open() to have multiple samples getting into the same mmap’d
memory when they are both attached to the same process.
https://lore.kernel.org/all/92645262-D319-4068-9C44-2409EF44888E@gmail.com/
Because the event->ctx is not ready when the perf_event_set_output() is
invoked in the perf_event_open().
Besides the above issue, before the commit bd2756811766 ("perf: Rewrite
core context handling"), perf record can errors out when sampling with
a hardware event and a software event as below.
$ perf record -e cycles,dummy --per-thread ls
failed to mmap with 22 (Invalid argument)
That's because that prior to the commit a hardware event and a software
event are from different task context.
The problem should be a long time issue since commit c3f00c70276d
("perk: Separate find_get_context() from event initialization").
The task struct is stored in the event->hw.target for each per-thread
event. It is a more reliable way to determine whether two events are
attached to the same task.
The event->hw.target was also introduced several years ago by the
commit 50f16a8bf9d7 ("perf: Remove type specific target pointers"). It
can not only be used to fix the issue with the current code, but also
back port to fix the issues with an older kernel.
Note: The event->hw.target was introduced later than commit c3f00c70276d. The patch may cannot be applied between the commit c3f00c70276d and commit 50f16a8bf9d7. Anybody that wants to back-port
this at that period may have to find other solutions.
Fixes: c3f00c70276d ("perf: Separate find_get_context() from event initialization") Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Zhengjun Xing <zhengjun.xing@linux.intel.com> Link: https://lkml.kernel.org/r/20230322202449.512091-1-kan.liang@linux.intel.com
Peter Zijlstra [Mon, 3 Apr 2023 09:08:58 +0000 (11:08 +0200)]
perf: Optimize perf_pmu_migrate_context()
Thomas reported that offlining CPUs spends a lot of time in
synchronize_rcu() as called from perf_pmu_migrate_context() even though
he's not actually using uncore events.
Turns out, the thing is unconditionally waiting for RCU, even if there's
no actual events to migrate.
Fixes: 0cda4c023132 ("perf: Introduce perf_pmu_migrate_context()") Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lkml.kernel.org/r/20230403090858.GT4253@hirez.programming.kicks-ass.net
Karol Wachowski [Fri, 31 Mar 2023 11:36:02 +0000 (13:36 +0200)]
accel/ivpu: Add dma fence to command buffers only
Currently job->done_fence is added to every BO handle within a job. If job
handle (command buffer) is shared between multiple submits, KMD will add
the fence in each of them. Then bo_wait_ioctl() executed on command buffer
will exit only when all jobs containing that handle are done.
This creates deadlock scenario for user mode driver in case when job handle
is added as dependency of another job, because bo_wait_ioctl() of first job
will wait until second job finishes, and second job can not finish before
first one.
Having fences added only to job buffer handle allows user space to execute
bo_wait_ioctl() on the job even if it's handle is submitted with other job.
Fixes: cd7272215c44 ("accel/ivpu: Add command buffer submission logic") Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331113603.2802515-2-stanislaw.gruszka@linux.intel.com
tracing: Fix ftrace_boot_snapshot command line logic
The kernel command line ftrace_boot_snapshot by itself is supposed to
trigger a snapshot at the end of boot up of the main top level trace
buffer. A ftrace_boot_snapshot=foo will do the same for an instance called
foo that was created by trace_instance=foo,...
The logic was broken where if ftrace_boot_snapshot was by itself, it would
trigger a snapshot for all instances that had tracing enabled, regardless
if it asked for a snapshot or not.
When a snapshot is requested for a buffer, the buffer's
tr->allocated_snapshot is set to true. Use that to know if a trace buffer
wants a snapshot at boot up or not.
Since the top level buffer is part of the ftrace_trace_arrays list,
there's no reason to treat it differently than the other buffers. Just
iterate the list if ftrace_boot_snapshot was specified.
Link: https://lkml.kernel.org/r/20230405022341.895334039@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ross Zwisler <zwisler@google.com> Fixes: 9c1c251d670bc ("tracing: Allow boot instances to have snapshot buffers") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
tracing: Have tracing_snapshot_instance_cond() write errors to the appropriate instance
If a trace instance has a failure with its snapshot code, the error
message is to be written to that instance's buffer. But currently, the
message is written to the top level buffer. Worse yet, it may also disable
the top level buffer and not the instance that had the issue.
Link: https://lkml.kernel.org/r/20230405022341.688730321@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ross Zwisler <zwisler@google.com> Fixes: 2824f50332486 ("tracing: Make the snapshot trigger work with instances") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
gve: Secure enough bytes in the first TX desc for all TCP pkts
Non-GSO TCP packets whose SKBs' linear portion did not include the
entire TCP header were not populating the first Tx descriptor with
as many bytes as the vNIC expected. This change ensures that all
TCP packets populate the first descriptor with the correct number of
bytes.
Eric Dumazet [Mon, 3 Apr 2023 21:46:43 +0000 (21:46 +0000)]
netlink: annotate lockless accesses to nlk->max_recvmsg_len
syzbot reported a data-race in data-race in netlink_recvmsg() [1]
Indeed, netlink_recvmsg() can be run concurrently,
and netlink_dump() also needs protection.
[1]
BUG: KCSAN: data-race in netlink_recvmsg / netlink_recvmsg
read to 0xffff888141840b38 of 8 bytes by task 23057 on cpu 0:
netlink_recvmsg+0xea/0x730 net/netlink/af_netlink.c:1988
sock_recvmsg_nosec net/socket.c:1017 [inline]
sock_recvmsg net/socket.c:1038 [inline]
__sys_recvfrom+0x1ee/0x2e0 net/socket.c:2194
__do_sys_recvfrom net/socket.c:2212 [inline]
__se_sys_recvfrom net/socket.c:2208 [inline]
__x64_sys_recvfrom+0x78/0x90 net/socket.c:2208
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
write to 0xffff888141840b38 of 8 bytes by task 23037 on cpu 1:
netlink_recvmsg+0x114/0x730 net/netlink/af_netlink.c:1989
sock_recvmsg_nosec net/socket.c:1017 [inline]
sock_recvmsg net/socket.c:1038 [inline]
____sys_recvmsg+0x156/0x310 net/socket.c:2720
___sys_recvmsg net/socket.c:2762 [inline]
do_recvmmsg+0x2e5/0x710 net/socket.c:2856
__sys_recvmmsg net/socket.c:2935 [inline]
__do_sys_recvmmsg net/socket.c:2958 [inline]
__se_sys_recvmmsg net/socket.c:2951 [inline]
__x64_sys_recvmmsg+0xe2/0x160 net/socket.c:2951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x0000000000000000 -> 0x0000000000001000
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 23037 Comm: syz-executor.2 Not tainted 6.3.0-rc4-syzkaller-00195-g5a57b48fdfcb #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
Fixes: 9063e21fb026 ("netlink: autosize skb lengthes") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230403214643.768555-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andy Roulin [Mon, 3 Apr 2023 21:20:53 +0000 (14:20 -0700)]
ethtool: reset #lanes when lanes is omitted
If the number of lanes was forced and then subsequently the user
omits this parameter, the ksettings->lanes is reset. The driver
should then reset the number of lanes to the device's default
for the specified speed.
However, although the ksettings->lanes is set to 0, the mod variable
is not set to true to indicate the driver and userspace should be
notified of the changes.
The consequence is that the same ethtool operation will produce
different results based on the initial state.
If the initial state is:
$ ethtool swp1 | grep -A 3 'Speed: '
Speed: 500000Mb/s
Lanes: 2
Duplex: Full
Auto-negotiation: on
then executing 'ethtool -s swp1 speed 50000 autoneg off' will yield:
$ ethtool swp1 | grep -A 3 'Speed: '
Speed: 500000Mb/s
Lanes: 2
Duplex: Full
Auto-negotiation: off
While if the initial state is:
$ ethtool swp1 | grep -A 3 'Speed: '
Speed: 500000Mb/s
Lanes: 1
Duplex: Full
Auto-negotiation: off
executing the same 'ethtool -s swp1 speed 50000 autoneg off' results in:
$ ethtool swp1 | grep -A 3 'Speed: '
Speed: 500000Mb/s
Lanes: 1
Duplex: Full
Auto-negotiation: off
This patch fixes this behavior. Omitting lanes will always results in
the driver choosing the default lane width for the chosen speed. In this
scenario, regardless of the initial state, the end state will be, e.g.,
$ ethtool swp1 | grep -A 3 'Speed: '
Speed: 500000Mb/s
Lanes: 2
Duplex: Full
Auto-negotiation: off
Fixes: 012ce4dd3102 ("ethtool: Extend link modes settings uAPI with lanes") Signed-off-by: Andy Roulin <aroulin@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/ac238d6b-8726-8156-3810-6471291dbc7f@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
raw/ping: Fix locking in /proc/net/{raw,icmp}.
The first patch fixes a NULL deref for /proc/net/raw and second one fixes
the same issue for ping sockets.
The first patch also converts hlist_nulls to hlist, but this is because
the current code uses sk_nulls_for_each() for lockless readers, instead
of sk_nulls_for_each_rcu() which adds memory barrier, but raw sockets
does not use the nulls marker nor SLAB_TYPESAFE_BY_RCU in the first place.
OTOH, the ping sockets already uses sk_nulls_for_each_rcu(), and such
conversion can be posted later for net-next.
====================
ping: Fix potentail NULL deref for /proc/net/icmp.
After commit dbca1596bbb0 ("ping: convert to RCU lookups, get rid
of rwlock"), we use RCU for ping sockets, but we should use spinlock
for /proc/net/icmp to avoid a potential NULL deref mentioned in
the previous patch.
Let's go back to using spinlock there.
Note we can convert ping sockets to use hlist instead of hlist_nulls
because we do not use SLAB_TYPESAFE_BY_RCU for ping sockets.
Fixes: dbca1596bbb0 ("ping: convert to RCU lookups, get rid of rwlock") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 0daf07e52709 ("raw: convert raw sockets to RCU"), we
use RCU and hlist_nulls_for_each_entry() to iterate over SOCK_RAW
sockets. However, we should use spinlock for slow paths to avoid
the NULL deref.
Also, SOCK_RAW does not use SLAB_TYPESAFE_BY_RCU, and the slab object
is not reused during iteration in the grace period. In fact, the
lockless readers do not check the nulls marker with get_nulls_value().
So, SOCK_RAW should use hlist instead of hlist_nulls.
Instead of adding an unnecessary barrier by sk_nulls_for_each_rcu(),
let's convert hlist_nulls to hlist and use sk_for_each_rcu() for
fast paths and sk_for_each() and spinlock for /proc/net/raw.
Dan Williams [Mon, 3 Apr 2023 23:01:32 +0000 (16:01 -0700)]
cxl/hdm: Extend DVSEC range register emulation for region enumeration
One motivation for mapping range registers to decoder objects is
to use those settings for region autodiscovery.
The need to map a region for devices programmed to use range registers
is especially urgent now that the kernel no longer routes "Soft
Reserved" ranges in the memory map to device-dax by default. The CXL
memory range loses all access mechanisms.
Complete the implementation by marking the DPA reservation and setting
the endpoint-decoder state to signal autodiscovery. Note that the
default settings of ways=1 and granularity=4096 set in cxl_decode_init()
do not need to be updated.
Dan Williams [Mon, 3 Apr 2023 22:13:37 +0000 (15:13 -0700)]
cxl/hdm: Limit emulation to the number of range registers
Recall that range register emulation seeks to treat the 2 potential
range registers as Linux CXL "decoder" objects. The number of range
registers can be 1 or 2, while HDM decoder ranges can include more than
2.
Be careful not to confuse DVSEC range count with HDM capability decoder
count. Commit to range register earlier in devm_cxl_setup_hdm().
Otherwise, a device with more HDM decoders than range registers can set
@cxlhdm->decoder_count to an invalid value.
Avoid introducing a forward declaration by just moving the definition of
should_emulate_decoders() earlier in the file. should_emulate_decoders()
is unchanged.
Tested-by: Dave Jiang <dave.jiang@intel.com> Fixes: d7a2153762c7 ("cxl/hdm: Add emulation when HDM decoders are not committed") Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/168012574932.221280.15944705098679646436.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Mon, 3 Apr 2023 22:01:20 +0000 (15:01 -0700)]
cxl/region: Move coherence tracking into cxl_region_attach()
Each time the contents of a given HPA are potentially changed in a cache
incoherent manner the CXL core sets CXL_REGION_F_INCOHERENT to
invalidate CPU caches before the region is used.
Successful invocation of attach_target() indicates that DPA has been
newly assigned to a given HPA in the dynamic region creation flow.
However, attach_target() is also reused in the autodiscovery flow where
the region was activated by platform firmware. In that case there is no
need to invalidate caches because that region is already in active use
and nothing about the autodiscovery flow modifies the HPA-to-DPA
relationship.
In the autodiscovery case cxl_region_attach() exits early after
determining the endpoint decoder is already correctly attached to the
region.
Dan Williams [Mon, 3 Apr 2023 21:44:41 +0000 (14:44 -0700)]
cxl/region: Fix region setup/teardown for RCDs
RCDs (CXL memory devices that link train without VH capability and show
up as root complex integrated endpoints), hide the presence of the link
between the endpoint and the host-bridge. The CXL region setup/teardown
paths assume that a link hop is present and go looking for at least one
'struct cxl_port' instance between the CXL root port-object and an
endpoint port-object leading to crashes of the form:
Dan Williams [Mon, 3 Apr 2023 21:39:16 +0000 (14:39 -0700)]
cxl/port: Fix find_cxl_root() for RCDs and simplify it
The find_cxl_root() helper is used to lookup root decoders and other CXL
platform topology information for a given endpoint. It turns out that
for RCDs it has never worked. The result of find_cxl_root(&cxlmd->dev)
is always NULL for the RCH topology case because it expects to find a
cxl_port at the host-bridge. RCH topologies only have the root cxl_port
object with the host-bridge as a dport. While there are no reports of
this being a problem to date, by inspection region enumeration should
crash as a result of this problem, and it does in a local unit test for
this scenario.
However, an observation that ever since:
commit f17b558d6663 ("cxl/pmem: Refactor nvdimm device registration, delete the workqueue")
...all callers of find_cxl_root() occur after the memdev connection to
the port topology has been established. That means that find_cxl_root()
can be simplified to a walk of the endpoint port topology to the root.
Switch to that arrangement which also fixes the RCD bug.
projects / linux-stable / log